Date: Fri, 23 Feb 2007 19:38:37 +0000 From: "Jim Stapleton" <stapleton.41@gmail.com> To: "Philipp Wuensche" <cryx-freebsd@h3q.com> Cc: freebsd-questions@freebsd.org Subject: Re: problems with jail Message-ID: <80f4f2b20702231138l122a0749hf790d3d67c411797@mail.gmail.com> In-Reply-To: <45DF3EE1.6030901@h3q.com> References: <80f4f2b20702231107p1cf7f4f3n5896aa7e8ef0ecaf@mail.gmail.com> <45DF3EE1.6030901@h3q.com>
next in thread | previous in thread | raw e-mail | index | archive | help
new host rc.conf: hostname="elrond.ameritech.net" #ifconfig_nve0="inet 192.168.1.84 netmask 255.255.255.0" ipv4_addrs_nve0="192.168.1.84-85/24 netmask 255.255.255.0" defaultrouter="192.168.1.1" #ifconfig_nve0="DHCP" usbd_enable="YES" linux_enable="YES" sshd_enable="YES" sendmail_enable="NO" inetd_flags="-wW -a 192.168.1.84" rpcbind_enable="NO" attempts after rebooting still fail. The jail rc.conf: #hostname="legolas.ameritech.net" #ifconfig_nve0="inet 192.168.1.85 netmask 255.255.255.0" #defaultrouter="192.168.1.1" rpcbind_enable="NO" ifconfig_nve0="" I have tried this with both the above setup, and one setup commenting out the ifconfig_nve0="" line, and uncommenting the other ifconfig_nve0/defaultrouter lines (just in case I misread something). Neither worked. Thanks -Jim Stapleton On 2/23/07, Philipp Wuensche <cryx-freebsd@h3q.com> wrote: > Jim Stapleton wrote: > > Jail: > > sjss@elrond 14:04:11 (0) ~ > sudo jail /jail/ legolas 192.168.1.85 > > /bin/csh > > %telnet 192.168.1.4 25 > > Trying 192.168.1.4... > > ^Z > > Suspended > > %kill %1 > > [1] Terminated telnet 192.168.1.4 25 > > %ifconfig -a > > nve0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > ether 00:13:d4:2e:2f:62 > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > > plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > > > > > OK, from host: > > sjss@elrond 14:02:11 (0) ~ > ifconfig -a > > nve0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > > inet 192.168.1.84 netmask 0xffffff00 broadcast 192.168.1.255 > > ether 00:13:d4:2e:2f:62 > > media: Ethernet autoselect (100baseTX <full-duplex>) > > status: active > > plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > > inet6 ::1 prefixlen 128 > > inet 127.0.0.1 netmask 0xff000000 > > sjss@elrond 14:04:08 (0) ~ > jls > > JID IP Address Hostname Path > > 1 192.168.1.85 legolas /jail > > > > > > > > Is that what you needed > > You only have configured the 192.168.1.84 ipaddr on your nve0 interface, > you need to configure the 192.168.1.85 ipaddr. on the interface too. > > Delete the > > ifconfig_nve0="inet 192.168.1.84 netmask 255.255.255.0" > > line in rc.conf and replace it with > > ipv4_addrs_nve0="192.168.1.84-85/24" > > and do a reboot. If you don't want to reboot, use "ifconfig nve0 alias > 192.168.1.85/32" to configure the alias while the system is running. > > You could also use the jail_example_interface="nve0" option in rc.conf > and reboot, but I don't recommend that because it is somewhat broken and > poorly implemented. > > greetings, > philipp > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?80f4f2b20702231138l122a0749hf790d3d67c411797>