Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 23 Feb 2007 19:38:37 +0000
From:      "Jim Stapleton" <stapleton.41@gmail.com>
To:        "Philipp Wuensche" <cryx-freebsd@h3q.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: problems with jail
Message-ID:  <80f4f2b20702231138l122a0749hf790d3d67c411797@mail.gmail.com>
In-Reply-To: <45DF3EE1.6030901@h3q.com>
References:  <80f4f2b20702231107p1cf7f4f3n5896aa7e8ef0ecaf@mail.gmail.com> <45DF3EE1.6030901@h3q.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
new host rc.conf:

hostname="elrond.ameritech.net"
#ifconfig_nve0="inet 192.168.1.84 netmask 255.255.255.0"
ipv4_addrs_nve0="192.168.1.84-85/24 netmask 255.255.255.0"
defaultrouter="192.168.1.1"
#ifconfig_nve0="DHCP"
usbd_enable="YES"
linux_enable="YES"
sshd_enable="YES"

sendmail_enable="NO"
inetd_flags="-wW -a 192.168.1.84"
rpcbind_enable="NO"


attempts after rebooting still fail.


The jail rc.conf:
#hostname="legolas.ameritech.net"
#ifconfig_nve0="inet 192.168.1.85 netmask 255.255.255.0"
#defaultrouter="192.168.1.1"
rpcbind_enable="NO"
ifconfig_nve0=""


I have tried this with both the above setup, and one setup commenting
out the ifconfig_nve0="" line, and uncommenting the other
ifconfig_nve0/defaultrouter lines (just in case I misread something).
Neither worked.

Thanks
-Jim Stapleton



On 2/23/07, Philipp Wuensche <cryx-freebsd@h3q.com> wrote:
> Jim Stapleton wrote:
> > Jail:
> > sjss@elrond 14:04:11 (0) ~  > sudo jail /jail/ legolas 192.168.1.85
> > /bin/csh
> > %telnet 192.168.1.4 25
> > Trying 192.168.1.4...
> > ^Z
> > Suspended
> > %kill %1
> > [1]    Terminated                    telnet 192.168.1.4 25
> > %ifconfig -a
> > nve0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >        ether 00:13:d4:2e:2f:62
> >        media: Ethernet autoselect (100baseTX <full-duplex>)
> >        status: active
> > plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> >
> >
> > OK, from host:
> > sjss@elrond 14:02:11 (0) ~  > ifconfig -a
> > nve0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >        inet 192.168.1.84 netmask 0xffffff00 broadcast 192.168.1.255
> >        ether 00:13:d4:2e:2f:62
> >        media: Ethernet autoselect (100baseTX <full-duplex>)
> >        status: active
> > plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> >        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
> >        inet6 ::1 prefixlen 128
> >        inet 127.0.0.1 netmask 0xff000000
> > sjss@elrond 14:04:08 (0) ~  > jls
> >   JID  IP Address      Hostname                      Path
> >     1  192.168.1.85    legolas                       /jail
> >
> >
> >
> > Is that what you needed
>
> You only have configured the 192.168.1.84 ipaddr on your nve0 interface,
> you need to configure the 192.168.1.85 ipaddr. on the interface too.
>
> Delete the
>
> ifconfig_nve0="inet 192.168.1.84 netmask 255.255.255.0"
>
> line in rc.conf and replace it with
>
> ipv4_addrs_nve0="192.168.1.84-85/24"
>
> and do a reboot. If you don't want to reboot, use "ifconfig nve0 alias
> 192.168.1.85/32" to configure the alias while the system is running.
>
> You could also use the jail_example_interface="nve0" option in rc.conf
> and reboot, but I don't recommend that because it is somewhat broken and
> poorly implemented.
>
> greetings,
> philipp
>
>
>



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?80f4f2b20702231138l122a0749hf790d3d67c411797>