Date: Sun, 04 Apr 2004 20:30:26 -0500 From: "J.D. Bronson" <jbronson@wixb.com> To: freebsd-questions@freebsd.org Subject: tape drive not found (5.2.1) Message-ID: <6.1.0.5.2.20040404202741.00be25b8@cheyenne.wixb.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format... ------------=_1081128625-238-24 Content-Type: text/plain; charset="us-ascii"; format=flowed Content-Disposition: inline I dont understand this... Here is what I see: I have an adaptec 29160 controller.. sa0 at ahc0 bus 0 target 3 lun 0 sa0: <HP C1533A A907> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 32) da0 at ahc0 bus 0 target 0 lun 0 da0: <QUANTUM ATLAS10K3_18_WLS 020W> Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 17537MB (35916548 512 byte sectors: 255H 63S/T 2235C) It 'sees' both the drive and the tape unit... However, doing 'mt status' gives me this: # mt status mt: /dev/nsa0: Device not configured yet the dev looks ok: lrwxr-xr-x 1 root wheel 4 Apr 4 20:18 nsa0 -> nsa0.0 crw-rw---- 1 root operator 14, 1 Apr 4 20:18 nsa0.0 crw-rw---- 1 root operator 14, 5 Apr 4 20:18 nsa0.1 crw-rw---- 1 root operator 14, 9 Apr 4 20:18 nsa0.2 crw-rw---- 1 root operator 14, 13 Apr 4 20:18 nsa0.3 What am I missing here? The tape drive works fine on my other *bsd machines...and FreeBSD does see this unit... Help? -- J.D. Bronson Aurora Health Care // Information Services // Milwaukee, WI USA Office: 414.978.8282 // Email: jd@aurora.org // Pager: 414.314.8282 ** DISCLAIMER ** Per Anti-Virus Policy, this e-email has been scanned for viruses. Scanned clean by F-PROT ANTIVIRUS 4.4.1 - http://www.f-prot.com ------------=_1081128625-238-24--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.1.0.5.2.20040404202741.00be25b8>