Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 12 Jan 2011 20:56:19 +0300
From:      Lev Serebryakov <lev@serebryakov.spb.ru>
To:        Pyun YongHyeon <pyunyh@gmail.com>
Cc:        freebsd-net@freebsd.org
Subject:   Re: Juniper e3k with ports limitied to 100Mbit and re NICs on MSI MoBo: problems with duplex negotiation (Hetzner host provider discard FreeBSD support due this bug)
Message-ID:  <1982630028.20110112205619@serebryakov.spb.ru>
In-Reply-To: <20110112173242.GA12920@michelle.cdnetworks.com>
References:  <1512738982.20110111124729@serebryakov.spb.ru> <20110111200007.GC6278@michelle.cdnetworks.com> <149076940.20110112003110@serebryakov.spb.ru> <20110111224526.GD6278@michelle.cdnetworks.com> <751614742.20110112120303@serebryakov.spb.ru> <20110112173242.GA12920@michelle.cdnetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Hello, Pyun.
You wrote 12 =D1=8F=D0=BD=D0=B2=D0=B0=D1=80=D1=8F 2011 =D0=B3., 20:32:42:


>> > That had been supported for long time. Just remove full-duplex
>> > media option in your manual configuration.
>>   What do you mean by this? Without this media options it will be
>>   100Mbit half-duplex when switch port want 100Mbit full-duplex. With
> Because you have to rely on parallel detection the end result would
> be half-duplex. So switch port could be configured to
> 100Mbps/half-duplex and you can still use auto-negotiation. This
   What if I CAN NOT configure switch port? It is
100Mbps/full-duplex/no-autonegotiation and it is not under my control!

--=20
// Black Lion AKA Lev Serebryakov <lev@serebryakov.spb.ru>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1982630028.20110112205619>