Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 02 May 2009 15:46:10 -0400
From:      Jimmie James <jimmiejaz@gmail.com>
To:        freebsd-questions@freebsd.org,  freebsd-x11@freebsd.org,  freebsd-multimedia@FreeBSD.org
Subject:   Repeatable X lockups
Message-ID:  <49FCA302.4020606@gmail.com>

next in thread | raw e-mail | index | archive | help
When using the xv output driver for vlc or mplayer, X will lockup, crash 
instantly, trashing the screen and forcing a reboot
Image of screen corruption: 
http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg

This just started manifesting in the past week or so.

HW/SW details
All that's printed to Xorg.0.log
(II) intel(0): EDID vendor "NEC", prod id 17450
Memory heap 0x2867e260:
   Offset:0002a000, Size:00100000, F.

Free list:
  FREE Offset:0002a000, Size:00100000, F.
End of memory blocks

pciconf -lv
vgapci0@pci0:0:2:0:     class=0x030000 card=0x25821043 chip=0x25828086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
     class      = display
     subclass   = VGA
vgapci1@pci0:0:2:1:     class=0x038000 card=0x25821043 chip=0x27828086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82915G Graphics device: 82915G/GV/910GL Express 
Chipset Family'
     class      = display


display bits from dmesg:
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at 
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 
2.1 on pci0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]


dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #0: Sat Mar 21 22:34:18 EDT 2009
     jimmie@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.02-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
   AMD Features=0x100000<NX>
   Logical CPUs per core: 2
real memory  = 1065091072 (1015 MB)
avail memory = 1032073216 (984 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at 
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 
2.1 on pci0
hdac0: <Intel 82801F High Definition Audio Controller> mem 
0xcfef8000-0xcfefbfff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090316_0130
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 
0x7000-0x701f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 
0x7400-0x741f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 
0x7800-0x781f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 
0x8000-0x801f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 
0xcfeffc00-0xcfefffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib5
fxp0: <Intel 82562EZ (ICH6)> port 0xa000-0xa03f mem 
0xcfffe000-0xcfffefff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:11:d8:11:b7:4e
fxp0: [ITHREAD]
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0xa400-0xa4ff mem 
0xcffff800-0xcffff8ff irq 22 at device 10.0 on pci1
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:29:51:c7:61
rl0: [ITHREAD]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 
0xcffffc00-0xcffffc7f irq 21 at device 11.0 on pci1
miibus2: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:c7:27:da
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6 SATA150 controller> port 
0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f 
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ichsmb0: <Intel 82801FB (ICH6) SMBus controller> port 0x400-0x41f irq 19 
at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on 
acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xca800-0xcafff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
ukbd0: <Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev 
2.00/1.73, addr 2> on uhub0
kbd2 at ukbd0
uhid0: <Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev 
2.00/1.73, addr 2> on uhub0
ums0: <B16_b_02 USB-PS/2 Optical Mouse, class 0/0, rev 2.00/98.02, addr 
3> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based 
forwarding enabled, default to accept, logging limited to 5 
packets/entry by default
ad0: 114473MB <WDC WD1200BB-00CAA0 16.06V16> at ata0-master UDMA100
acd0: DVDROM <SAMSUNG DVD-ROM SD-816B/H000> at ata0-slave UDMA33
hdac0: HDA Codec #0: Realtek ALC880
pcm0: <HDA Realtek ALC880 PCM #0 Digital> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC880 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC880 PCM #2 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC880 PCM #3 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:1:0): CAM Status: SCSI Status Error
(probe0:ata0:0:1:0): SCSI Status: Check Condition
(probe0:ata0:0:1:0): NOT READY asc:3a,0
(probe0:ata0:0:1:0): Medium not present
(probe0:ata0:0:1:0): Unretryable error
cd0 at ata0 bus 0 target 1 lun 0
cd0: <SAMSUNG DVD-ROM SD-816B H000> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
fxp0: link state changed to UP
xl0: link state changed to UP
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
drm0: [ITHREAD]

Xorg.0.log


X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-PRERELEASE i386
Current Operating System: FreeBSD jimmiejaz.org 7.2-PRERELEASE FreeBSD 
7.2-PRERELEASE #0: Sat Mar 21 22:34:18 EDT 2009 
jimmie@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO i386
Build Date: 06 April 2009  01:21:41AM

         Before reporting problems, check http://wiki.x.org
         to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May  2 14:28:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "monitor0"
(**) |   |-->Device "i810"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AIGLX" "true"
(**) Option "AllowEmptyInput" "OFF"
(**) Option "AutoAddDevices" "OFF"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
         /usr/local/lib/X11/fonts/local/,
         /usr/local/lib/X11/fonts/misc/,
         /usr/local/lib/X11/fonts/75dpi/:unscaled,
         /usr/local/lib/X11/fonts/100dpi/:unscaled,
         /usr/local/lib/X11/fonts/Type1/,
         /usr/local/lib/X11/fonts/75dpi/,
         /usr/local/lib/X11/fonts/100dpi/,
         /usr/local/lib/X11/fonts/TTF/,
         /usr/local/lib/X11/fonts/artwiz-fonts/,
         /usr/local/lib/X11/fonts/webfonts/,
         /usr/local/lib/X11/fonts/URW/,
         /usr/local/lib/X11/fonts/jmk,
         /usr/local/lib/X11/fonts/terminus-font,
         /usr/local/lib/X11/fonts/artwiz-fonts,
         /usr/local/lib/X11/fonts/misc/,
         /usr/local/lib/X11/fonts/TTF/,
         /usr/local/lib/X11/fonts/OTF,
         /usr/local/lib/X11/fonts/Type1/,
         /usr/local/lib/X11/fonts/100dpi/,
         /usr/local/lib/X11/fonts/75dpi/,
         built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Loader magic: 0x6a0
(II) Module ABI versions:
         X.Org ANSI C Emulation: 0.4
         X.Org Video Driver: 5.0
         X.Org XInput driver : 4.0
         X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@0:2:0) Intel Corporation 82915G/GV/910GL Integrated 
Graphics Controller rev 4, Mem @ 0xcfd80000/524288, 
0xd0000000/268435456, 0xcfe80000/262144, I/O @ 0x00006800/8, BIOS @ 
0x????????/65536
(--) PCI: (0@0:2:1) Intel Corporation 82915G Integrated Graphics 
Controller rev 4, Mem @ 0xcfe00000/524288
(II) System resource ranges:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also 
specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also 
specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "vbe"
(II) Loading /usr/local/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.1.0
         ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.13.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 2.6.3
         Module class: X.Org Video Driver
         ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.4.0
         Module class: X.Org XInput Driver
         ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.3.2
         Module class: X.Org XInput Driver
         ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
         i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
         E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
         965GM, 965GME/GLE, G33, Q35, Q33,
         Mobile Intel<C2><AE> GM45 Express Chipset,
         Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
         [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
         [5] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
         [6] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [7] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
         [8] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
         [9] 0   0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 0.1.0
         ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915G
(--) intel(0): Chipset: "915G"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xCFD80000
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section monitor0
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered 
at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "NEC", prod id 17450
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160 
1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 
605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 
603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 
484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 
492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 
486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   35.50  720 738 846 900  400 421 
423 449 -hsync -vsync (39.4 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 
414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688 
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 
769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 
771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 
771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 
768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 
628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 
604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 
643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 
865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 
484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 
604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 
769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 
961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688 
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160 
1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): EDID vendor "NEC", prod id 17450
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1600x1200
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x83e
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (320, 240) mm
(**) intel(0): DPI set to (127, 169)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 2.4.0
         ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
         [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
         [5] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
         [6] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [7] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
         [8] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
         [9] 0   0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 241152 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xcfd80000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0800000, handle = 0xd0800000
(II) intel(0): [drm] mapped back buffer at 0xd2800000, handle = 0xd2800000
(II) intel(0): [drm] mapped depth buffer at 0xd3000000, handle = 0xd3000000
(II) intel(0): [drm] mapped classic textures at 0xd3800000, handle = 
0xd3800000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 
0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02800000 (pgoffset 10240)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x03000000 (pgoffset 12288)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x03800000 (pgoffset 14336)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 
0x000000003f820000 physical
)
(II) intel(0): 0x0002a000-0x00129fff: fake bufmgr (1024 kB)
(II) intel(0): 0x0012a000-0x0012afff: overlay registers (4 kB, 
0x000000003f92a000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x01000000-0x022bffff: exa offscreen (19200 kB)
(II) intel(0): 0x02800000-0x02ffffff: back buffer (8192 kB)
(II) intel(0): 0x03000000-0x037fffff: depth buffer (8192 kB)
(II) intel(0): 0x03800000-0x057fffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled 
message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 306 x 230
(**) Option "Protocol" "AUTO"
(**) Mouse1: Device: "/dev/sysmouse"
(**) Mouse1: Protocol: "AUTO"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/sysmouse"
(**) Option "Buttons" "10"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
(**) Mouse1: Buttons: 10
(**) Mouse1: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(**) Mouse1: (accel) keeping acceleration scheme 1
(**) Mouse1: (accel) filter chain progression: 2.00
(**) Mouse1: (accel) filter stage 0: 20.00 ms
(**) Mouse1: (accel) set acceleration profile 0
(II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse1: SetupAuto: protocol is SysMouse
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) config/hal: Adding input device USB-PS/2 Optical Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Natural? Ergonomic Keyboard 4000
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
exaCopyDirty: Pending damage region empty!


xorg.conf:
Section "ServerLayout"
         Identifier     "Simple Layout"
         Screen         "Screen 1" 0 0
         InputDevice    "Mouse1" "CorePointer"
         InputDevice    "Keyboard1" "CoreKeyboard"
         Option          "AllowEmptyInput" "OFF"
         Option          "AutoAddDevices" "OFF"
EndSection

Section "Files"
#       RgbPath      "/usr/local/share/X11/rgb" #*REMOVED* UPDATING 
20090123:
         ModulePath   "/usr/local/lib/xorg/modules"
         FontPath     "/usr/local/lib/X11/fonts/local/"
         FontPath     "/usr/local/lib/X11/fonts/misc/"
         FontPath     "/usr/local/lib/X11/fonts/75dpi/:unscaled"
         FontPath     "/usr/local/lib/X11/fonts/100dpi/:unscaled"
         FontPath     "/usr/local/lib/X11/fonts/Type1/"
         FontPath     "/usr/local/lib/X11/fonts/75dpi/"
         FontPath     "/usr/local/lib/X11/fonts/100dpi/"
         FontPath     "/usr/local/lib/X11/fonts/TTF/"
         FontPath     "/usr/local/lib/X11/fonts/artwiz-fonts/"
         FontPath     "/usr/local/lib/X11/fonts/webfonts/"
         FontPath     "/usr/local/lib/X11/fonts/URW/"
         FontPath     "/usr/local/lib/X11/fonts/jmk"
         FontPath     "/usr/local/lib/X11/fonts/terminus-font"
         FontPath     "/usr/local/lib/X11/fonts/artwiz-fonts"
EndSection

Section "ServerFlags"
Option "AIGLX" "true"
EndSection

Section "Module"
         Load  "GLcore"
         Load  "glx"
         Load  "dri"
         Load  "drm"
         Load  "vbe"
        Load  "int10"
EndSection

Section "InputDevice"
         Identifier  "Keyboard1"
         Driver      "kbd"
         Option      "pc101"
EndSection

Section "InputDevice"
         Identifier  "Mouse1"
         Driver      "mouse"
         Option      "Protocol" "AUTO"
         Option      "Device" "/dev/sysmouse"
         Option      "Buttons" "10"
         Option      "ZAxisMapping" "4 5"
         Option      "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
         Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
         Identifier   "monitor0"
EndSection

Section "Device"

         Identifier  "i810"
         Driver      "intel"
         VendorName  "Intel"
         BoardName   "82915G/GV/910GL Express Chipset Family Graphics 
Controller"
         BusID       "PCI:0:2:0"

EndSection

Section "Screen"
         Identifier "Screen 1"
         Device     "i810"
         Monitor    "monitor0"
         DefaultDepth     16
         Subsection "Display"
                Modes     "1400x1050" "1280x1024" "1024x768"
         Depth 16
         EndSubSection
EndSection

Section "DRI"
         Mode         0666
EndSection

xrandr:

Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) 
306mm x 230mm
    1600x1200      65.0*
    1280x1024      75.0
    1280x960       60.0
    1152x864       75.0
    1024x768       85.0     75.0     70.1     60.0     43.5
    832x624        74.6
    800x600        85.1     72.2     75.0     60.3     56.2
    640x480        85.0     75.0     72.8     66.7     59.9
    720x400        87.8     70.1



-- 
Over the years I've come to regard you as people I've met.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49FCA302.4020606>