Date: Sun, 28 Oct 2001 19:21:08 +0100 From: Phil Regnauld <regnauld@catpipe.net> To: freebsd-multimedia@freebsd.org Subject: Shuttle FV24/savage4, 5.0-current, XFree-4.1.0_9, savage_drv 1.20 -> no go Message-ID: <20011028192108.K64686@tetard.starbsd.org>
next in thread | raw e-mail | index | archive | help
--CE+1k2dSO48ffgeK Content-Type: text/plain; charset=us-ascii Content-Disposition: inline [maybe this is better sent to the XFree people ?] Hi, I recently got hold of a Shuttle SV24 system w/ Shuttle FV24 motherboard (very small form-factor motherboard). The on-board video is a Savage 4 which uses system RAM, probed as: S3 ProSavage PM133 rev 2 I have been trying to get XFree 4.1.0 up and running on this, but no luck. The box is running 5.0-C, though I have tried with 4.4-R also. With stock XFree, the box simply hangs solid as soon as I run XFree86, even with just -probeonly. -configure works fine... I've compiled and installed the latest version of the driver available at http://www.probo.com/timr/savage40.html -- a bit better, but still no luck: the screen is half garbage, and any graphics show up as dark blue. As a sidenote, it works perfectly with XFree 4.1.0 and the updated driver on Mandrake Linux (the stock driver hangs the box on Linux too). Following are the probe messages. Thanks for any help or pointers! --CE+1k2dSO48ffgeK Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=probe XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: FreeBSD 5.0-CURRENT i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 28 20:48:42 2001 (++) Using config file: "/root/XF86Config.new" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(1:0:0) S3 ProSavage PM133 rev 2, Mem @ 0xdd000000/19, 0xd0000000/27 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o (II) Module savage: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.1.20 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) SAVAGE: driver (version 1.1.20t) for S3 Savage chipsets: Savage4, Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, ProSavage PN133, ProSavage KN133, SuperSavage/MX 128, SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64, SuperSavage/IXC 64 (--) Chipset ProSavage found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 (==) SAVAGE(0): Depth 8, (==) framebuffer bpp 8 (==) SAVAGE(0): Default visual is PseudoColor (**) SAVAGE(0): Option: shadow FB enabled (**) SAVAGE(0): Option: NoAccel - Acceleration Disabled (==) SAVAGE(0): Using SW cursor (**) SAVAGE(0): Using video BIOS to set modes (**) SAVAGE(0): Option: ShadowStatus enabled (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (==) SAVAGE(0): Write-combining range (0xa0000,0x20000) was already clear (==) SAVAGE(0): Write-combining range (0xf0000,0x10000) (II) SAVAGE(0): Primary V_BIOS segment is: 0xc000 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) SAVAGE(0): VESA BIOS detected (--) SAVAGE(0): Chip: id 8a25, "ProSavage PM133" (--) SAVAGE(0): Engine: "ProSavage" (--) SAVAGE(0): mapping MMIO @ 0xdd000000 with size 0x80000 (==) SAVAGE(0): Write-combining range (0xdd000000,0x80000) was already clear (==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0) (**) SAVAGE(0): videoram = 16384k (--) SAVAGE(0): Detected current MCLK value of 14.318 MHz (II) SAVAGE(0): Monitor0: Using hsync range of 31.00-69.00 kHz (II) SAVAGE(0): Monitor0: Using vrefresh range of 47.00-130.00 Hz (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz (II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) (II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (hsync out of range) (II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) SAVAGE(0): Not using default mode "1856x1392" (hsync out of range) (II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) SAVAGE(0): Not using default mode "1920x1440" (hsync out of range) (II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range) (--) SAVAGE(0): Found 17 modes at this depth: [12e] 320 x 200, 70Hz [131] 320 x 240, 72Hz [141] 400 x 300, 72Hz [151] 512 x 384, 70Hz [100] 640 x 400, 70Hz [101] 640 x 480, 160Hz, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz [171] 720 x 480, 75Hz, 72Hz [17c] 720 x 576, 75Hz, 72Hz [103] 800 x 600, 160Hz, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz, 56Hz [15c] 848 x 480, 75Hz, 60Hz [105] 1024 x 768, 130Hz, 100Hz, 85Hz, 75Hz, 72Hz, 70Hz, 60Hz [161] 1152 x 864, 100Hz, 85Hz, 75Hz, 72Hz, 70Hz, 60Hz [179] 1280 x 768, 60Hz [13f] 1280 x 960, 85Hz, 60Hz [107] 1280 x 1024, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz [16c] 1360 x 768, 60Hz [120] 1600 x 1200, 85Hz, 75Hz, 60Hz (--) SAVAGE(0): Virtual size is 1400x1050 (pitch 1408) (**) SAVAGE(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz (==) SAVAGE(0): DPI set to (75, 75) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libshadowfb.a (II) Module shadowfb: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 --CE+1k2dSO48ffgeK-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011028192108.K64686>