Date: Wed, 08 Apr 2009 15:48:04 -0500 From: Robert Noland <rnoland@FreeBSD.org> To: piotr.smyrak@heron.pl Cc: freebsd-stable@freebsd.org Subject: Re: no USB mice detected on GA-MA74GM-S2 Message-ID: <1239223684.4491.12.camel@balrog.2hip.net> In-Reply-To: <20090408190805.GA1368@smyrak.com> References: <20090408190805.GA1368@smyrak.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-dJ1DzJyAvHAqj0JuloTq Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Wed, 2009-04-08 at 21:08 +0200, Piotr Smyrak wrote: > Hi, >=20 > I recently upgraded my system to newer hardware with motherboard=20 > GIGABYTE GA-MA74GM-S2 Rev 1.0 with AMD 740G chipset (north bridge)=20 > and AMD SB700 (south) where USB support is located. Everything=20 > would be fine except there is no USB mice detection by FreeBSD at=20 > all. And I am stuck with USB mise since the mobo has no PS/2 port. >=20 > First I started with my old build of 6.2, then upgraded to 6.4=20 > STABLE, to finally upgrade to 7.2 PRERELEASE in hope of fixing the > issue. None of versions gave me USB mouse support. I have tried=20 > connecting 3 various mice. No luck. The only effect I can achieve=20 > after connecting a mouse, is a somewhat delayed message on console: rebuild/reinstall devel/libpciaccess now that you have updated kernel. robert. > "uhub0: device problem (TIMEOUT), disabling port 2" >=20 > The same mice worked great before changing mobo, and still continue=20 > be detected and operational on my laptop (tp x23) running 6.0. I was=20 > also able to use a mouse with no problem within Ubuntu LiveCD. >=20 > I have "device ums" compiled into the kernel. As well as devices uhci, > ohci and ehci, ugen and usb, too. usbdevs gives no info on any mouse. > Attaching a verbose dmesg from my currently installed 7.2 build. >=20 > Any help is appreciated.=20 >=20 > -- dmesg output below --=20 >=20 > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.2-PRERELEASE #4: Sat Apr 4 20:24:14 CEST 2009 > root@dsk:/usr/obj/usr/src/sys/SMYRU > Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b6000. > Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc08b6188. > Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08b6234. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08b62e0. > Calibrating clock(s) ... i8254 clock: 1193215 Hz > CLK_USE_I8254_CALIBRATION not specified - using default frequency > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 2505346537 Hz > CPU: AMD Athlon(tm) Dual Core Processor 4850e (2505.35-MHz 686-class CPU) > Origin =3D "AuthenticAMD" Id =3D 0x60fb2 Stepping =3D 2 > Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,= PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > Features2=3D0x2001<SSE3,CX16> > AMD Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow= !> > AMD Features2=3D0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> > TSC: P-state invariant > Cores per package: 2 > Data TLB: 32 entries, fully associative > Instruction TLB: 32 entries, fully associative > L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative > L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associ= ative > L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associat= ive > real memory =3D 2079195136 (1982 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) > 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) > 0x0000000000c25000 - 0x0000000079baffff, 2029563904 bytes (495499 pages) > avail memory =3D 2029035520 (1935 MB) > Table 'FACP' at 0x7bee3040 > Table 'SSDT' at 0x7bee73c0 > Table 'HPET' at 0x7bee7680 > Table 'MCFG' at 0x7bee76c0 > Table 'APIC' at 0x7bee7300 > MADT: Found table at 0x7bee7300 > MP Configuration Table version 1.4 found at 0xc00f0f00 > APIC: Using the MADT enumerator. > MADT: Found CPU APIC ID 0 ACPI ID 0: enabled > SMP: Added CPU 0 (AP) > MADT: Found CPU APIC ID 1 ACPI ID 1: enabled > SMP: Added CPU 1 (AP) > MADT: Found CPU APIC ID 2 ACPI ID 2: disabled > MADT: Found CPU APIC ID 3 ACPI ID 3: disabled > ACPI APIC Table: <GBT GBTUACPI> > INTR: Adding local APIC 1 as a target > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > bios32: Found BIOS32 Service Directory header at 0xc00fb100 > bios32: Entry =3D 0xfb7c0 (c00fb7c0) Rev =3D 0 Len =3D 1 > pcibios: PCI BIOS entry at 0xf0000+0xb810 > pnpbios: Found PnP BIOS data at 0xc00fc360 > pnpbios: Entry =3D f0000:c390 Rev =3D 1.0 > Other BIOS signatures found: > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > ULE: setup cpu group 0 > ULE: setup cpu 0 > ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 > ULE: setup cpu group 1 > ULE: setup cpu 1 > ULE: adding cpu 1 to group 1: cpus 1 mask 0x2 > ACPI: RSDP @ 0x0xf7200/0x0014 (v 0 GBT ) > ACPI: RSDT @ 0x0x7bee3000/0x0038 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x= 01010101) > ACPI: FACP @ 0x0x7bee3040/0x0074 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x= 01010101) > ACPI: DSDT @ 0x0x7bee30c0/0x4222 (v 1 GBT GBTUACPI 0x00001000 MSFT 0x= 0100000C) > ACPI: FACS @ 0x0x7bee0000/0x0040 > ACPI: SSDT @ 0x0x7bee73c0/0x028A (v 1 PTLTD POWERNOW 0x00000001 LTP 0x= 00000001) > ACPI: HPET @ 0x0x7bee7680/0x0038 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x= 00000098) > ACPI: MCFG @ 0x0x7bee76c0/0x003C (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x= 01010101) > ACPI: APIC @ 0x0x7bee7300/0x0084 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x= 01010101) > MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 > ioapic0: Changing APIC ID to 2 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > MADT: Interrupt override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > ioapic0: intpin 9 polarity: low > lapic0: Routing NMI -> LINT1 > lapic0: LINT1 trigger: edge > lapic0: LINT1 polarity: high > lapic1: Routing NMI -> LINT1 > lapic1: LINT1 trigger: edge > lapic1: LINT1 polarity: high > MADT: Ignoring local NMI routed to ACPI CPU 2 > MADT: Ignoring local NMI routed to ACPI CPU 3 > ioapic0 <Version 2.1> irqs 0-23 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 > kbd: new array size 4 > kbd1 at kbdmux0 > random: <entropy source, Software, Yarrow> > VESA: information block > 56 45 53 41 00 03 b8 01 00 c0 01 00 00 00 44 00=20 > 00 01 00 01 37 0a ef 00 00 c0 81 00 00 c0 88 4c=20 > 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00=20 > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00=20 > VESA: 51 mode(s) found > VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc078c524 (1000044) > VESA: ATI ATOMBIOS > VESA: (C) 1988-2005, ATI Technologies Inc. RS740 01.00 > mem: <memory> > Pentium Pro MTRR support enabled > null: <null device, zero device> > io: <I/O> > npx0: INT 16 interface > acpi0: <GBT GBTUACPI> on motherboard > ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 > acpi0: [MPSAFE] > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: wakeup code va 0xc4b7c000 pa 0x1000 > pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a340 > pci_open(1a): mode1res=3D0x80000000 (0x80000000) > pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D7911100= 2) > pcibios: BIOS version 3.00 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0 > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 7bde0000 (3) failed > ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 3 4 5 6 7 10 11 > Validation 0 255 N 0 3 4 5 6 7 10 11 > After Disable 0 255 N 0 3 4 5 6 7 10 11 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a= cpi0 > acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route > Timecounter "HPET" frequency 14318180 Hz quality 900 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: domain=3D0, physical bus=3D0 > found-> vendor=3D0x1002, dev=3D0x7911, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D0, func=3D0 > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0006, statreg=3D0x2220, cachelnsz=3D0 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1002, dev=3D0x7912, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D1, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords) > lattimer=3D0x63 (2970 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1002, dev=3D0x7916, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D6, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > powerspec 3 supports D0 D3 current D0 > MSI supports 1 message > found-> vendor=3D0x1002, dev=3D0x4390, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D17, func=3D0 > class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D11 > powerspec 2 supports D0 D3 current D0 > MSI supports 4 messages, 64 bit > map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled > map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled > map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled > map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled > map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled > map[24]: type Memory, range 32, base 0xfe02f000, size 10, enabled > pcib0: matched entry for 0.17.INTA > pcib0: slot 17 INTA hardwired to IRQ 22 > found-> vendor=3D0x1002, dev=3D0x4397, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D18, func=3D0 > class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D3 > map[10]: type Memory, range 32, base 0xfe02e000, size 12, enabled > pcib0: matched entry for 0.18.INTA > pcib0: slot 18 INTA hardwired to IRQ 16 > found-> vendor=3D0x1002, dev=3D0x4398, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D18, func=3D1 > class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D3 > map[10]: type Memory, range 32, base 0xfe02d000, size 12, enabled > pcib0: matched entry for 0.18.INTA > pcib0: slot 18 INTA hardwired to IRQ 16 > found-> vendor=3D0x1002, dev=3D0x4396, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D18, func=3D2 > class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0002, statreg=3D0x02b0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Db, irq=3D10 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfe02c000, size 8, enabled > pcib0: matched entry for 0.18.INTB > pcib0: slot 18 INTB hardwired to IRQ 17 > found-> vendor=3D0x1002, dev=3D0x4397, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D19, func=3D0 > class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D10 > map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled > pcib0: matched entry for 0.19.INTA > pcib0: slot 19 INTA hardwired to IRQ 18 > found-> vendor=3D0x1002, dev=3D0x4398, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D19, func=3D1 > class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D10 > map[10]: type Memory, range 32, base 0xfe02a000, size 12, enabled > pcib0: matched entry for 0.19.INTA > pcib0: slot 19 INTA hardwired to IRQ 18 > found-> vendor=3D0x1002, dev=3D0x4396, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D19, func=3D2 > class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0006, statreg=3D0x02b0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Db, irq=3D11 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfe029000, size 8, enabled > pcib0: matched entry for 0.19.INTB > pcib0: slot 19 INTB hardwired to IRQ 19 > found-> vendor=3D0x1002, dev=3D0x4385, revid=3D0x3a > domain=3D0, bus=3D0, slot=3D20, func=3D0 > class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0403, statreg=3D0x9230, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1002, dev=3D0x439c, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D20, func=3D1 > class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D0 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D255 > MSI supports 2 messages > map[20]: type I/O Port, range 32, base 0xfa00, size 4, enabled > found-> vendor=3D0x1002, dev=3D0x4383, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D20, func=3D2 > class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D3 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 64, base 0xfe024000, size 14, enabled > pcib0: matched entry for 0.20.INTA > pcib0: slot 20 INTA hardwired to IRQ 16 > found-> vendor=3D0x1002, dev=3D0x439d, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D20, func=3D3 > class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1002, dev=3D0x4384, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D20, func=3D4 > class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1 > cmdreg=3D0x0027, statreg=3D0x02a0, cachelnsz=3D0 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1002, dev=3D0x4399, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D20, func=3D5 > class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x02a0, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Dc, irq=3D10 > map[10]: type Memory, range 32, base 0xfe028000, size 12, enabled > pcib0: matched entry for 0.20.INTC > pcib0: slot 20 INTC hardwired to IRQ 18 > found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D24, func=3D0 > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D24, func=3D1 > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D24, func=3D2 > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00 > domain=3D0, bus=3D0, slot=3D24, func=3D3 > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 1 > pcib1: subordinate bus 1 > pcib1: I/O decode 0xe000-0xefff > pcib1: memory decode 0xfde00000-0xfdffffff > pcib1: prefetched decode 0xf8000000-0xfbffffff > pci1: <ACPI PCI bus> on pcib1 > pci1: domain=3D0, physical bus=3D1 > found-> vendor=3D0x1002, dev=3D0x796e, revid=3D0x00 > domain=3D0, bus=3D1, slot=3D5, func=3D0 > class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D10 > powerspec 2 supports D0 D1 D2 D3 current D0 > MSI supports 1 message, 64 bit > map[10]: type Prefetchable Memory, range 64, base 0xf8000000, size 26, e= nabled > pcib1: requested memory range 0xf8000000-0xfbffffff: good > map[18]: type Memory, range 64, base 0xfdff0000, size 16, enabled > pcib1: requested memory range 0xfdff0000-0xfdffffff: good > map[20]: type I/O Port, range 32, base 0xee00, size 8, enabled > pcib1: requested I/O range 0xee00-0xeeff: in range > map[24]: type Memory, range 32, base 0xfde00000, size 20, enabled > pcib1: requested memory range 0xfde00000-0xfdefffff: good > pcib1: matched entry for 1.5.INTA > pcib1: slot 5 INTA hardwired to IRQ 18 > vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xf8000000-0xfbf= fffff,0xfdff0000-0xfdffffff,0xfde00000-0xfdefffff irq 18 at device 5.0 on p= ci1 > pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 > pcib2: domain 0 > pcib2: secondary bus 2 > pcib2: subordinate bus 2 > pcib2: I/O decode 0xd000-0xdfff > pcib2: memory decode 0xfdd00000-0xfddfffff > pcib2: prefetched decode 0xfda00000-0xfdafffff > pci2: <ACPI PCI bus> on pcib2 > pci2: domain=3D0, physical bus=3D2 > found-> vendor=3D0x10ec, dev=3D0x8168, revid=3D0x02 > domain=3D0, bus=3D2, slot=3D0, func=3D0 > class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D1 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D10 > powerspec 3 supports D0 D1 D2 D3 current D0 > MSI supports 2 messages, 64 bit > MSI-X supports 2 messages in map 0x20 > map[10]: type I/O Port, range 32, base 0xde00, size 8, enabled > pcib2: requested I/O range 0xde00-0xdeff: in range > map[18]: type Prefetchable Memory, range 64, base 0xfdaff000, size 12, e= nabled > pcib2: requested memory range 0xfdaff000-0xfdafffff: good > map[20]: type Prefetchable Memory, range 64, base 0xfdae0000, size 16, e= nabled > pcib2: requested memory range 0xfdae0000-0xfdaeffff: good > pcib2: matched entry for 2.0.INTA > pcib2: slot 0 INTA hardwired to IRQ 18 > pci2: <network, ethernet> at device 0.0 (no driver attached) > atapci0: <ATI IXP700 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03= ,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22= at device 17.0 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00 > atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000 > ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49 > atapci0: [MPSAFE] > atapci0: [ITHREAD] > atapci0: AHCI Version 01.10 controller with 4 ports detected > ata2: <ATA channel 0> on atapci0 > ata2: SATA connect time=3D0ms > ata2: SIGNATURE: 00000101 > ata2: ahci_reset devices=3D0x1<ATA_MASTER> > ata2: [MPSAFE] > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: SATA connect status=3D00000000 > ata3: ahci_reset devices=3D0x0 > ata3: [MPSAFE] > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci0 > ata4: SATA connect status=3D00000000 > ata4: ahci_reset devices=3D0x0 > ata4: [MPSAFE] > ata4: [ITHREAD] > ata5: <ATA channel 3> on atapci0 > ata5: SATA connect status=3D00000000 > ata5: ahci_reset devices=3D0x0 > ata5: [MPSAFE] > ata5: [ITHREAD] > ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 a= t device 18.0 on pci0 > ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000 > ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50 > ohci0: [GIANT-LOCKED] > ohci0: [ITHREAD] > usb0: OHCI version 1.0, legacy support > usb0: SMM does not respond, resetting > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 3 ports with 3 removable, self powered > ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 a= t device 18.1 on pci0 > ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000 > ohci1: [GIANT-LOCKED] > ohci1: [ITHREAD] > usb1: OHCI version 1.0, legacy support > usb1: SMM does not respond, resetting > usb1: <OHCI (generic) USB controller> on ohci1 > usb1: USB revision 1.0 > uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 3 ports with 3 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq = 17 at device 18.2 on pci0 > ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02c000 > ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > ehci0: Dropped interrupts workaround enabled > usb2: EHCI version 1.0 > usb2: companion controllers, 3 ports each: usb0 usb1 > usb2: <EHCI (generic) USB 2.0 controller> on ehci0 > usb2: USB revision 2.0 > uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 > uhub2: 6 ports with 6 removable, self powered > ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 a= t device 19.0 on pci0 > ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000 > ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 > ohci2: [GIANT-LOCKED] > ohci2: [ITHREAD] > usb3: OHCI version 1.0, legacy support > usb3: SMM does not respond, resetting > usb3: <OHCI (generic) USB controller> on ohci2 > usb3: USB revision 1.0 > uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > uhub3: 3 ports with 3 removable, self powered > ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 a= t device 19.1 on pci0 > ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000 > ohci3: [GIANT-LOCKED] > ohci3: [ITHREAD] > usb4: OHCI version 1.0, legacy support > usb4: SMM does not respond, resetting > usb4: <OHCI (generic) USB controller> on ohci3 > usb4: USB revision 1.0 > uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 3 ports with 3 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq = 19 at device 19.2 on pci0 > ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000 > ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > ehci1: Dropped interrupts workaround enabled > usb5: EHCI version 1.0 > usb5: companion controllers, 3 ports each: usb3 usb4 > usb5: <EHCI (generic) USB 2.0 controller> on ehci1 > usb5: USB revision 2.0 > uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 > uhub5: 6 ports with 6 removable, self powered > pci0: <serial bus, SMBus> at device 20.0 (no driver attached) > atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x1= 77,0x376,0xfa00-0xfa0f at device 20.1 on pci0 > atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00 > ata0: <ATA channel 0> on atapci1 > atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D50 > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat0=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f > ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb > ata0: reset tp2 stat0=3Dff stat1=3D00 devices=3D0x8<ATAPI_SLAVE> > ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54 > ata0: [MPSAFE] > ata0: [ITHREAD] > pci0: <multimedia, HDA> at device 20.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > pcib3: domain 0 > pcib3: secondary bus 3 > pcib3: subordinate bus 3 > pcib3: I/O decode 0xc000-0xcfff > pcib3: memory decode 0xfdc00000-0xfdcfffff > pcib3: prefetched decode 0xfdb00000-0xfdbfffff > pcib3: Subtractively decoded bridge. > pci3: <ACPI PCI bus> on pcib3 > pci3: domain=3D0, physical bus=3D3 > found-> vendor=3D0x1317, dev=3D0x0985, revid=3D0x11 > domain=3D0, bus=3D3, slot=3D6, func=3D0 > class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D1 (dwords) > lattimer=3D0x20 (960 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x80 (32000= ns) > intpin=3Da, irq=3D5 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type I/O Port, range 32, base 0xce00, size 8, enabled > pcib3: requested I/O range 0xce00-0xceff: in range > map[14]: type Memory, range 32, base 0xfdcff000, size 10, enabled > pcib3: requested memory range 0xfdcff000-0xfdcff3ff: good > pcib3: matched entry for 3.6.INTA > pcib3: slot 6 INTA hardwired to IRQ 20 > dc0: <ADMtek AN985 10/100BaseTX> port 0xce00-0xceff mem 0xfdcff000-0xfdcf= f3ff irq 20 at device 6.0 on pci3 > dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xce00 > miibus0: <MII bus> on dc0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > ukphy0: OUI 0x000749, model 0x0001, rev. 1 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > dc0: bpf attached > dc0: Ethernet address: 00:00:e8:12:73:a7 > ioapic0: routing intpin 20 (PCI IRQ 20) to vector 55 > dc0: [MPSAFE] > dc0: [ITHREAD] > ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 a= t device 20.5 on pci0 > ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe028000 > ohci4: [GIANT-LOCKED] > ohci4: [ITHREAD] > usb6: OHCI version 1.0, legacy support > usb6: SMM does not respond, resetting > usb6: <OHCI (generic) USB controller> on ohci4 > usb6: USB revision 1.0 > uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0047 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > cpu0: switching to generic Cx mode > powernow0: <PowerNow! K8> on cpu0 > cpu1: <ACPI CPU> on acpi0 > powernow1: <PowerNow! K8> on cpu1 > ata: ata0 already exists; skipping it > atkbdc: atkbdc0 already exists; skipping it > sc: sc0 already exists; skipping it > vga: vga0 already exists; skipping it > pnp_identify: Trying Read_Port at 203 > pnp_identify: Trying Read_Port at 243 > pnp_identify: Trying Read_Port at 283 > pnp_identify: Trying Read_Port at 2c3 > pnp_identify: Trying Read_Port at 303 > pnp_identify: Trying Read_Port at 343 > pnp_identify: Trying Read_Port at 383 > pnp_identify: Trying Read_Port at 3c3 > PNP Identify complete > isa_probe_children: disabling PnP devices > isa_probe_children: probing non-PnP devices > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff pnpid ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > adv0: not probed (disabled) > aha0: not probed (disabled) > aic0: not probed (disabled) > ata1 failed to probe at port 0x170 irq 15 on isa0 > bt0: not probed (disabled) > cs0: not probed (disabled) > ed0: not probed (disabled) > fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 > fe0: not probed (disabled) > ie0: not probed (disabled) > le0: not probed (disabled) > ppc0: parallel port found at 0x378 > ppc0: using extended I/O port range > ppc0: SPP > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > ioapic0: routing intpin 7 (ISA IRQ 7) to vector 57 > ppbus0: [MPSAFE] > ppbus0: [ITHREAD] > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppc0: [GIANT-LOCKED] > ppc0: [ITHREAD] > sio0 failed to probe at port 0x3f8 irq 4 on isa0 > sio1 failed to probe at port 0x2f8 irq 3 on isa0 > sio2: not probed (disabled) > sio3: not probed (disabled) > sn0: not probed (disabled) > vt0: not probed (disabled) > isa_probe_children: probing PnP devices > Device configuration finished. > Reducing kern.maxvnodes 130270 -> 100000 > procfs registered > lapic: Divisor 2, Frequency 100213866 hz > Timecounter "TSC" frequency 2505346537 Hz quality -100 > Timecounters tick every 1.000 msec > lo0: bpf attached > ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA40 cable=3D40 wire > acd0: setting PIO4 on IXP700 chip > acd0: DMA limited to UDMA33, device found non-ATA66 cable > acd0: setting UDMA33 on IXP700 chip > acd0: <LITE-ON COMBO SOHC-5232K/NK06> CDRW drive at ata0 as slave > acd0: read 4134KB/s (8958KB/s) write 8958KB/s (8958KB/s), 2048KB buffer, = UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet > acd0: Writes: CDR, CDRW, test write, burnproof > acd0: Audio: play, 255 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: CD-ROM 120mm data disc > ata2-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire > ad4: 305244MB <WDC WD3200AVJS-63WDA0 12.01B02> at ata2-master SATA300 > ad4: 625140335 sectors [620178C/16H/63S] 16 sectors/interrupt 1 depth que= ue > GEOM: new disk ad4 > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 > (probe0:ata0:0:1:0): error 22 > (probe0:ata0:0:1:0): Unretryable Error > (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? > acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00=20 > (probe0:ata0:0:1:0): error 22 > (probe0:ata0:0:1:0): Unretryable Error > pass0 at ata0 bus 0 target 1 lun 0 > pass0: <LITE-ON COMBO SOHC-5232K NK06> Removable CD-ROM SCSI-0 device=20 > pass0: 33.000MB/s transfers > GEOM: new disk cd0 > cd0 at ata0 bus 0 target 1 lun 0 > cd0: <LITE-ON COMBO SOHC-5232K NK06> Removable CD-ROM SCSI-0 device=20 > cd0: 33.000MB/s transfers > cd0: cd present [294606 x 2048 byte records] > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 > ioapic0: Assigning ISA IRQ 1 to local APIC 0 > ioapic0: Assigning ISA IRQ 7 to local APIC 1 > ioapic0: Assigning ISA IRQ 9 to local APIC 0 > ioapic0: Assigning ISA IRQ 14 to local APIC 1 > ioapic0: Assigning PCI IRQ 16 to local APIC 0 > ioapic0: Assigning PCI IRQ 17 to local APIC 1 > ioapic0: Assigning PCI IRQ 18 to local APIC 0 > ioapic0: Assigning PCI IRQ 19 to local APIC 1 > ioapic0: Assigning PCI IRQ 20 to local APIC 0 > ioapic0: Assigning PCI IRQ 22 to local APIC 1 > scsi_cd.c::ioctl cmd=3D4400648b error=3D25 > Trying to mount root from ufs:/dev/ad4s2a > start_init: trying /sbin/init > Linux ELF exec handler installed > fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" --=20 Robert Noland <rnoland@FreeBSD.org> FreeBSD --=-dJ1DzJyAvHAqj0JuloTq Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEABECAAYFAkndDYMACgkQM4TrQ4qfROOZeACfUIMSVw1DNtoWSWN/VSkEovOe 17YAoIPwyAbrNP08cqE7w9qOsxUVoYci =+qL/ -----END PGP SIGNATURE----- --=-dJ1DzJyAvHAqj0JuloTq--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1239223684.4491.12.camel>