Date: Sat, 01 Mar 2003 14:02:12 -0600 From: "Jack L. Stone" <jackstone@sage-one.net> To: "Aaron Burke" <aburke@nullplusone.com>, <freebsd-questions@freebsd.org> Subject: RE: Hooking 2 Networks Message-ID: <3.0.5.32.20030301140212.01df3e88@sage-one.net> In-Reply-To: <AMEMKJNMFLJCJDLFIEDBMEDJCJAA.aburke@nullplusone.com> References: <3.0.5.32.20030301115349.01df7978@sage-one.net>
next in thread | previous in thread | raw e-mail | index | archive | help
At 11:00 AM 3.1.2003 -0800, Aaron Burke wrote: >> Subject: Hooking 2 Networks >> >> >> I have two separate connections to the Internet with static >> IPs and two separate networks. Each network has an internal >> FBSD Gateway/NAT/caching DNS connected to the backbone & >> each have a separate LAN subnet (192.168.0.x on one and >> 10.0.0.x on another). The default router for each LAN is >> its internal Gateway machine, so they know which GW to use >> to get out to the Net. Each also operates web & mail >> servers. Each have their own switches from the Gateway >> machine cabled to the servers/workstations. > >This is possible and easy, it will however become a problem >if your machines are getting thier ip addresses via DHCP. >There may be a better way. (see below) Each machine has static internal IPs and listed in the /etc/hosts so finding them is easy. >You may find it more conveinient to attach one box to both >networks. The most simple solution would be to attach both >gateways to both networks. But dont attach the networks >together. Doing it this way avoids cable usage, and ethernet >broadcasts dont have to be advertized on both networks. >You also will not have to worry about setting up a specific >routes on each client. And because both routers will have >addresses on both networks they will auto-forward packets >between the two networks. > >The following is my idea of what your network looks like >now: > >{192.168.0.0}--[freebsd gateway]--{internet conn1} >(10.0.0.1}--[freebsd gateway]--{internet conn2} > >And what you want to do would be the following: > >{192.168.0.0}--[freebsd-gateway]--{internet conn1} > (link) >{10.0.0.0}--[freebsd gateway]---{internet conn2} > How did you "link" the two machines....? I have 2 NICs in each box - 1 for external and 1 for internal. >This will simplify the number of hops between the boxes >and you will get much higher speeds. And if you attach >the two FreeBSD boxes to both networks, you can still >safely use DHCP for providing IP addresses to the >clients. > >> >> I would like to hook the two networks together via the >> switches & I assUme I do this by running a cable from >> the one switch to the uplink on the other....??? >> Is my assumption correct? >Yes, this will work, but you may want to simply attach >both gateways to the two networks. > >> >> I would like to have all machines have direct & fast >> access via the internal NW cables for NFS access. >Attaching both unix boxes to both networks will solve >this for you. > >> >> As simple as this sounds, I have not found anything >> anywhere about hooking 2 networks together and if >> there is any problems. Guess I could just hook up >> and try it, but rather double-check with some one >> who has a similar setup -- or point me to a URL >> (I've googled, visited the networking and router sites >> - none talk about directly hooking 2 NWs). >> >> Appreciate any replies..... thanks! >No problem, let us know if you wish to continue this. >Lots of people on this list can provide good advise. >(better than me in many cases) > Just have those two questions above inline..... thanks again. >> >> Best regards, >> Jack L. Stone, >> Administrator >> >> SageOne Net >> http://www.sage-one.net >> jackstone@sage-one.net > > > Best regards, Jack L. Stone, Administrator SageOne Net http://www.sage-one.net jackstone@sage-one.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.20030301140212.01df3e88>