Date: Sat, 01 Sep 2018 02:08:25 +0000 From: bugzilla-noreply@freebsd.org To: sparc64@FreeBSD.org Subject: [Bug 229422] Sun Fire V245 cannot boot Message-ID: <bug-229422-14-AvRSglz1yC@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-229422-14@https.bugs.freebsd.org/bugzilla/> References: <bug-229422-14@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D229422 --- Comment #8 from Yoshihiko Iwama <iwama@t3.rim.or.jp> --- I tried applying "src.opts.mk.diff" patch. However, I could not boot on V24= 5 or Ultra30. The log is as follows: =3D=3D=3D V245 {1} ok boot disk3 Boot device: /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@3,0 File a= nd args:=20 >> FreeBSD/sparc64 ZFS boot block Boot path: /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@3,0:a Consoles: Open Firmware console=20=20 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|= /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\| FreeBSD/sparc64 ZFS enabled bootstrap loader, Revision 1.0 (Thu Aug 30 22:24:54 JST 2018 root@v245.led.t3.rim.or.jp) bootpath=3D"/pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@3,0:a" /-\|/-\| /-\|/-\|/-\|/-\|/-\|/-\|can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help. OK=20 =3D=3D=3D =3D=3D=3D Ultra30 ok boot /pci@1f,2000/scsi@1,1/disk@0,0 Boot device: /pci@1f,2000/scsi@1,1/disk@0,0 File and args:=20 >> FreeBSD/sparc64 ZFS boot block Boot path: /pci@1f,2000/scsi@1,1/disk@0,0:a Consoles: Open Firmware console=20=20 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ FreeBSD/sparc64 ZFS enabled bootstrap loader, Revision 1.0 (Thu Aug 30 22:24:54 JST 2018 root@v245.led.t3.rim.or.jp) bootpath=3D"/pci@1f,2000/scsi@1,1/disk@0,0:a" |/-\|/-\ |/-\|/-\|/-\|/-\|/-\|/-\can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help. OK=20 =3D=3D=3D I am concerned that the boot animation, "|/-\|/-\", is displayed divided in= to two lines after the "bootpath=3D" line. As before patching, I could boot with the combination of zfsboot of 11.1-RELEASE and patched zfsloader. The log is as follows, in this log, the boot animation after "bootpath=3D" is one line: =3D=3D=3D V245 {1} ok boot disk1 Boot device: /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@1,0 File a= nd args:=20 >> FreeBSD/sparc64 ZFS boot block Boot path: /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/scsi@1/disk@1,0:a Consoles: Open Firmware console=20=20 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|= /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ FreeBSD/sparc64 ZFS enabled bootstrap loader, Revision 1.0 (Thu Aug 30 22:24:54 JST 2018 root@v245.led.t3.rim.or.jp) bootpath=3D"zfs:zroot/ROOT:" |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|Loading /boot/defaults/loader.conf /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\= |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/kernel data=3D0xc61b40+0xf34b8 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-syms=3D[0x8+0xd8a80\|/-+0= x8+0xca379\|/] -\|/-\|/-\|/-\|/-\|//boot/entropy size=3D0x1000 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/zfs.ko text=3D0x2c9168 /-\|/-\|/-\data=3D0xcc48+0x90498 |syms=3D[0x8+0x22560+0x8+0x1bbcd/] loading required module 'opensolaris' -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//boot/kernel/opensolaris.ko text=3D0x30= f0 data=3D0x2c8+0x1a30 syms=3D[0x8+0xde0+0x8+0x95a] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel]= in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel] in 5 seconds... Booting [/boot/kernel/kernel] in 4 seconds... Booting [/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 seconds... Booting [/boot/kernel/kernel] in 1 second... Booting [/boot/kernel/kernel]...=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 -\|/-\|/-\jumping to kernel entry at 0xc00b0000. Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE #0 r336574: Sun Jul 22 01:12:54 JST 2018 root@v245.led.t3.rim.or.jp:/usr/obj/usr/src/sys/GENERIC sparc64 gcc version 4.2.1 20070831 patched [FreeBSD] real memory =3D 17179869184 (16384 MB) avail memory =3D 16822042624 (16042 MB) cpu0: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU) cpu1: Sun Microsystems UltraSparc-IIIi Processor (1504.00 MHz CPU) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs random: entropy device external interface kbd0 at kbdmux0 nexus0: <Open Firmware Nexus device> pcib0: <Sun Host-PCIe bridge> mem 0x4000f600000-0x4000f6effff,0x4000f410000-0x4000f473fff irq 1983,1982 on ne= xus0 pcib0: Fire, module-revision 3, IGN 0x1e Timecounter "pcib0" frequency 188000000 Hz quality 100 pcib0: DVMA map: 0xc0000000 to 0xffffffff 131072 entries pci0: <OFW PCI bus> on pcib0 pcib1: <OFW PCIe-PCIe bridge> mem 0x100000-0x11ffff at device 0.0 on pci0 pci1: <OFW PCI bus> on pcib1 pcib2: <OFW PCIe-PCIe bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 pcib3: <OFW PCIe-PCIe bridge> at device 0.0 on pci2 pci3: <OFW PCI bus> on pcib3 pcib4: <OFW PCIe-PCIe bridge> at device 2.0 on pci1 pci4: <OFW PCI bus> on pcib4 pcib5: <OFW PCIe-PCIe bridge> at device 8.0 on pci1 pci5: <OFW PCI bus> on pcib5 pcib6: <OFW PCIe-PCIe bridge> at device 9.0 on pci1 pci6: <OFW PCI bus> on pcib6 pcib7: <OFW PCIe-PCIe bridge> at device 0.0 on pci6 pci7: <OFW PCI bus> on pcib7 pcib8: <OFW PCIe-PCI bridge> at device 8.0 on pci7 pci8: <OFW PCI bus> on pcib8 pcib9: <OFW PCIe-PCIe bridge> at device 10.0 on pci1 pci9: <OFW PCI bus> on pcib9 pcib10: <OFW PCIe-PCIe bridge> at device 0.0 on pci9 pci10: <OFW PCI bus> on pcib10 pcib11: <OFW PCIe-PCI bridge> at device 8.0 on pci10 pci11: <OFW PCI bus> on pcib11 pcib12: <Sun Host-PCIe bridge> mem 0x4000ff00000-0x4000ffeffff,0x4000fc10000-0x4000fc73fff irq 2047,2046 on ne= xus0 pcib12: Fire, module-revision 3, IGN 0x1f pcib12: DVMA map: 0xc0000000 to 0xffffffff 131072 entries pci12: <OFW PCI bus> on pcib12 pcib13: <OFW PCIe-PCIe bridge> at device 0.0 on pci12 pci13: <OFW PCI bus> on pcib13 pcib14: <OFW PCIe-PCIe bridge> at device 0.2 on pci12 pci14: <OFW PCI bus> on pcib14 ebus0: <JBus-EBus bridge> mem 0x4000fc64000-0x4000fc6401f on nexus0 nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type memory-controller (no driver attached) nexus0: <memory-controller> mem 0x40000800000-0x40000800007 type memory-controller (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff = at device 28.0 on pci3 usbus0 on ohci0 ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x2000000-0x2000fff = at device 28.1 on pci3 usbus1 on ohci1 ehci0: <ALi M5239 USB 2.0 controller> mem 0x200000-0x2000ff at device 28.3 = on pci3 usbus2: EHCI version 1.0 usbus2 on ehci0 isab0: <PCI-ISA bridge> at device 30.0 on pci3 isa0: <ISA bus> on isab0 atapci0: <AcerLabs M5229 UDMA133 controller> port 0x1040-0x1047,0x1080-0x1083,0x10c0-0x10c7,0x1100-0x1103,0x1000-0x100f at de= vice 31.0 on pci3 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 bge0: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x4200000-0x420ffff,0x4010000-0x401ffff at device 4.0 on pci7 bge0: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus0: <MII bus> on bge0 brgphy0: <BCM5714 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:14:4f:a9:58:9e bge1: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x4400000-0x440ffff,0x4030000-0x403ffff at device 4.1 on pci7 bge1: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus1: <MII bus> on bge1 brgphy1: <BCM5714 1000BASE-T media interface> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:14:4f:a9:58:9f bge2: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x4800000-0x480ffff,0x4610000-0x461ffff at device 4.0 on pci10 bge2: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus2: <MII bus> on bge2 brgphy2: <BCM5714 1000BASE-T media interface> PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Ethernet address: 00:14:4f:a9:58:a0 bge3: <Broadcom BCM5715 A3, ASIC rev. 0x009003> mem 0x4a00000-0x4a0ffff,0x4630000-0x463ffff at device 4.1 on pci10 bge3: CHIP ID 0x00009003; ASIC REV 0x09; CHIP REV 0x90; PCI-X 133 MHz miibus3: <MII bus> on bge3 brgphy3: <BCM5714 1000BASE-T media interface> PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge3: Ethernet address: 00:14:4f:a9:58:a1 mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0x4c00000-0x4c03fff,0x4c10000-0x4c1ffff at device 1.0 on pci11 mpt0: MPI Version=3D1.5.12.0 mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 ) mpt0: 0 Active Volumes (2 Max) mpt0: 0 Hidden Drive Members (10 Max) ebus0: <flashprom> addr 0-0x1fffff (no driver attached) uart0: <16550 or compatible> addr 0x200000080-0x200000087 irq 1992 on ebus0uart0: console (9600,n,8,1) uart1: <16550 or compatible> addr 0x200000040-0x200000047 irq 1993 on ebus0 ebus0: <rmc-comm> addr 0x200000000-0x200000007 irq 1994 (no driver attached) ebus0: <gpio> addr 0x2000000c0 (no driver attached) epic0: <Sun Fire V215/V245 LEDs> addr 0x300000000-0x300000080 on ebus0 ebus0: <power> addr 0x300000040-0x3000000c1 irq 1987 (no driver attached) nexus0: <i2c> mem 0x4000fd30000-0x4000fd3003f irq 1985 type i2c (no driver attached) cryptosoft0: <software crypto> on nexus0 nexus0: <syscons> type unknown (no driver attached) rtc0: <Real-Time Clock> at port 0x70-0x73 on isa0 rtc0: registered as a time-of-day clock, resolution 1.000000s ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounter "tick" frequency 1504000000 Hz quality 10 Timecounter "stick" frequency 20000000 Hz quality 10 Event timer "tick" frequency 1504000000 Hz quality 1000 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 ugen0.1: <AcerLabs OHCI root HUB> at usbus0 uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <AcerLabs OHCI root HUB> at usbus1 uhub1: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <AcerLabs EHCI root HUB> at usbus2 uhub2: <AcerLabs EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 da0 at mpt0 bus 0 scbus2 target 0 lun 0 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered da0: <HITACHI H106030SDSUN300G A2B0> Fixed Direct Access SPC-4 SCSI device da0: Serial Number 001114N1MM6B PMH1MM6B da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 286102MB (585937500 512 byte sectors) da1 at mpt0 bus 0 scbus2 target 1 lun 0 da1: <SEAGATE ST930003SSUN300G 0B70> Fixed Direct Access SPC-3 SCSI device da1: Serial Number 001109734E4D 6SE34E4D da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 286102MB (585937500 512 byte sectors) da2 at mpt0 bus 0 scbus2 target 2 lun 0 da2: <HITACHI H106030SDSUN300G A2B0> Fixed Direct Access SPC-4 SCSI device da2: Serial Number 001114N1K9XB PMH1K9XB da2: 300.000MB/s transfers da2: Command Queueing enabled da2: 286102MB (585937500 512 byte sectors) da3 at mpt0 bus 0 scbus2 target 3 lun 0 da3: <SEAGATE ST930003SSUN300G 0B70> Fixed Direct Access SPC-3 SCSI device da3: Serial Number 001109734D8E 6SE34D8E da3: 300.000MB/s transfers da3: Command Queueing enabled da3: 286102MB (585937500 512 byte sectors) SMP: AP CPU #1 Launched! cd0 at ata2 bus 0 scbus0 target 0 lun 0 cd0: <MATSHITA DVD-RAM UJ-85JS F100> Removable CD-ROM SCSI device cd0: 33.300MB/s transfers (Trying to mount root from zfs:zroot/ROOT []... UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Root mount waiting for: usbus2 Root mount waiting for: usbus2 uhub2: 8 ports with 8 removable, self powered Root mount waiting for: usbus2 random: unblocking device. ugen1.2: <vendor 0x03eb Standard USB Hub> at usbus1 uhub3 on uhub1 uhub3: <Standard USB Hub> on usbus1 uhub3: 4 ports with 4 removable, self powered Setting hostuuid: 98925954-8cb1-11e8-b3e6-00144fa9589e. Setting hostid: 0x777339ba. No suitable dump device was found. Starting file system checks: Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat Setting hostname: v245.led.t3.rim.or.jp. Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTA= CH,CACHED Feeding entropy: . bge0: link state changed to DOWN bge0: link state changed to UP Starting Network: lo0 bge0 bge1 bge2 bge3. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128=20 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5=20 inet 127.0.0.1 netmask 0xff000000=20 nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> groups: lo=20 bge0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:9e hwaddr 00:14:4f:a9:58:9e inet 192.168.65.45 netmask 0xffffff00 broadcast 192.168.65.255=20 inet6 fe80::214:4fff:fea9:589e%bge0 prefixlen 64 scopeid 0x1=20 nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex>) status: active bge1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:9f hwaddr 00:14:4f:a9:58:9f nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect bge2: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:a0 hwaddr 00:14:4f:a9:58:a0 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect bge3: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:a1 hwaddr 00:14:4f:a9:58:a1 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting devd. Starting Network: bge1. bge1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:9f hwaddr 00:14:4f:a9:58:9f nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting Network: bge2. bge2: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:a0 hwaddr 00:14:4f:a9:58:a0 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting Network: bge3. bge3: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 =20=20=20=20=20=20=20 options=3D8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE> ether 00:14:4f:a9:58:a1 hwaddr 00:14:4f:a9:58:a1 nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect add host 127.0.0.1: gateway lo0 fib 0: route already in table add net default: gateway 192.168.65.1 add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Starting syslogd. Clearing /tmp (X related). Updating motd:. Mounting late filesystems:. Starting ntpd. Performing sanity check on sshd configuration. Sep 1 09:42:56 v245 ntpd[889]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 248 days ago Starting sshd. Starting cron. Starting background file system=20 FreeBSD/sparc64 (v245.led.t3.rim.or.jp) (ttyu0) login:=20 =3D=3D=3D Also, I am concerned that the value of "bootpath=3D" line is different. Tha= t is, if both zfsboot and zfsloader are patched, it is the device name of OBP, an= d if only zfsloader is patched, it is "zfs:zroot/ROOT:". --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-229422-14-AvRSglz1yC>