Date: Mon, 13 Jun 2011 15:49:40 -0700 (PDT) From: Tom <bifrost@minions.com> To: freebsd-wireless@freebsd.org Subject: iwn 6205a on -STABLE Message-ID: <Pine.BSF.4.64.1106131536020.22064@evil.minions.com>
next in thread | raw e-mail | index | archive | help
Howdy, I've got an Intel wireless card that appears to be supported by the driver, but whenever it is used, it stops working after about 60-65 seconds when connected to a WPA network. I haven't tested with an open wireless yet.. It dumps out what looks like a firmware debug. Here's what shows up in dmesg for it: iwn0: <Intel(R) PRO/Wireless 6205a> mem 0xd2500000-0xd2501fff irq 17 at device 0.0 on pci3 iwn0: MIMO 2T2R, MoW, address a0:88:b4:2c:0e:4c iwn0: [ITHREAD] iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps pciconf output: iwn0@pci0:3:0:0: class=0x028000 card=0x13118086 chip=0x00858086 rev=0x34 hdr=0x00 vendor = 'Intel Corporation' class = network Here's the firmware dump: firmware error log: error type = "UNKNOWN" (0x00000034) program counter = 0x0000F648 source line = 0x0000E10C error data = 0x0000000207030000 branch link = 0x0000F6340000F666 interrupt link = 0x0000D2520000C0CC time = 1054921304 driver status: tx ring 0: qid=0 cur=203 queued=4 tx ring 1: qid=1 cur=0 queued=0 tx ring 2: qid=2 cur=0 queued=0 tx ring 3: qid=3 cur=5 queued=0 tx ring 4: qid=4 cur=68 queued=0 tx ring 5: qid=5 cur=0 queued=0 tx ring 6: qid=6 cur=0 queued=0 tx ring 7: qid=7 cur=0 queued=0 tx ring 8: qid=8 cur=0 queued=0 tx ring 9: qid=9 cur=0 queued=0 tx ring 10: qid=10 cur=0 queued=0 tx ring 11: qid=11 cur=0 queued=0 tx ring 12: qid=12 cur=0 queued=0 tx ring 13: qid=13 cur=0 queued=0 tx ring 14: qid=14 cur=0 queued=0 tx ring 15: qid=15 cur=0 queued=0 tx ring 16: qid=16 cur=0 queued=0 tx ring 17: qid=17 cur=0 queued=0 tx ring 18: qid=18 cur=0 queued=0 tx ring 19: qid=19 cur=0 queued=0 rx ring: cur=2 I duplicated the makefile for another iwn firmware mod after verifying it was the same rev as the other 6xxx firmwares. Here's the MD5 of the firmware module: # md5 iwn6005fw.ko MD5 (iwn6005fw.ko) = 77f363e5b45d2886d3bf3cdfef728529 Here's the sha256: # sha256 iwn6005fw.ko SHA256 (iwn6005fw.ko) = 7f1138ebed7d586f7fe20a598bc06fb373998c6ad6469170b48927525f09f2ba This is from -STABLE as of 6/8/2011: FreeBSD redacted 8.2-STABLE FreeBSD 8.2-STABLE #0: Wed Jun 8 23:58:25 PDT 2011 bifrost@redacted:/usr/src/sys/amd64/compile/GENERIC amd64 (yes, my laptop is called redacted heheh) I tried checking out the drivers from head, but they won't build on -current so I'm not sure what my next options are to getting this on -stable. Any help would be appreciated. -Tom
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.64.1106131536020.22064>