Date: Sat, 3 Dec 2005 15:10:31 +0000 From: Danny Pansters <danny@ricin.com> To: freebsd-questions@freebsd.org Cc: Lucas Fol <lllfff@gmail.com> Subject: Re: Problem with printing-scanning..combo.. Message-ID: <200512031510.31971.danny@ricin.com> In-Reply-To: <1133381839.1099.8.camel@lucas> References: <1133381839.1099.8.camel@lucas>
next in thread | previous in thread | raw e-mail | index | archive | help
You probably want these (both are from HP ported from Linux): /usr/ports/print/hpijs /usr/ports/graphics/hpoj The first has the foomatic drivers for optimal printing, the second include= s=20 scanning support. It's very well documented, our HP photosmart 2610 prints= =20 and scans fine from kde using cups and kooka. In short:=20 ptal-init setup scanimage --list-devices HTH, Dan On Wednesday 30 November 2005 20:17, Lucas Fol wrote: > Welcome > > I own a HP PSC 1610 all-in-one. I've plugged it (USB) to my notebook > (Acer TM 212 TX). The printing stuff goes ok. It prints well with cups > and ulpt driver. The problem is with scanning. The BSD doesn't see the > scanner. sane-find-scanner can't do do it. The uscanner module is > compiled in kernel. That's the 6.0 Release of FreeBSD. I've tried to > solve it for whole three days and i still don't get it. > That's my dmesg: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights > reserved. > FreeBSD 6.0-RELEASE #0: Sun Nov 27 17:33:48 CET 2005 > lucas@lucas:/usr/src/sys/i386/compile/A-GENERIC > module nfslock already present! > module_register: module uhub/uhid already exists! > Module uhub/uhid failed to register: 17 > module_register: module pci/rl already exists! > Module pci/rl failed to register: 17 > module_register: module cardbus/rl already exists! > Module cardbus/rl failed to register: 17 > module_register: module rl/miibus already exists! > Module rl/miibus failed to register: 17 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel Celeron (797.05-MHz 686-class CPU) > Origin =3D "GenuineIntel" Id =3D 0x68a Stepping =3D 10 > > Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,= CMOV >,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 259981312 (247 MB) > avail memory =3D 240738304 (229 MB) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <Acer FALCON2M> on motherboard > acpi0: Power Button (fixed) > pci_link0: <ACPI PCI Link PILA> irq 11 on acpi0 > pci_link1: <ACPI PCI Link PILB> irq 11 on acpi0 > pci_link2: <ACPI PCI Link PILC> irq 10 on acpi0 > pci_link3: <ACPI PCI Link PILD> irq 11 on acpi0 > pci_link4: <ACPI PCI Link PILE> on acpi0 > pci_link5: <ACPI PCI Link PILF> on acpi0 > pci_link6: <ACPI PCI Link PILG> irq 10 on acpi0 > pci_link7: <ACPI PCI Link PILH> irq 10 on acpi0 > pci_link8: <ACPI PCI Link PILI> irq 11 on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x22> port 0x62,0x66 on acpi0 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0xf108-0xf10b on acpi0 > cpu0: <ACPI CPU> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: no PRT entry for 0.16.INTAagp0: <Ali M1621 host to AGP bridge> > mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pcm0: <Acer Labs M5451> port 0x8000-0x80ff mem 0x81a00000-0x81a00fff irq > 10 at device 6.0 on pci0 > pcm0: <Cirrus Logic CS4299 AC97 Codec> > pcm0: [GIANT-LOCKED] > isab0: <PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <AcerLabs M5229 UDMA66 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x7050-0x705f irq 15 at device 16.0 > on pci0 > atapci0: using PIO transfers above 137GB as workaround for 48bit DMA > access bug, expect reduced performance > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <bridge> at device 17.0 (no driver attached) > cbb0: <O2Micro OZ6812/6872 PCI-CardBus Bridge> irq 11 at device 19.0 on > pci0 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem > 0x81c00000-0x81c00fff irq 11 at device 20.0 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > pmtimer0 on isa0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 > ulpt0: HP PSC 1600 series, rev 2.00/1.00, addr 2, iclass 255/204 > ulpt0: using bi-directional mode > umass0: HP PSC 1600 series, rev 2.00/1.00, addr 2 > Timecounter "TSC" frequency 797050193 Hz quality 800 > Timecounters tick every 1.000 msec > rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem > 0x88000000-0x880001ff irq 11 at device 0.0 on cardbus0 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:50:fc:b9:8a:30 > ad0: 9590MB <TOSHIBA MK1016GAP U1.14 A> at ata0-master UDMA66 > acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N/0H33> at ata1-slave UDMA33 > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=3D0x64 ascq=3D0x00 > error=3D4<ABORTED> > cd0 at ata1 bus 0 target 1 lun 0 > cd0: <HL-DT-ST RW/DVD GCC-4241N 0H33> Removable CD-ROM SCSI-0 device > cd0: 33.000MB/s transfers > cd0: cd present [80250 x 2048 byte records] > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <HP PSC 1610 1.00> Removable Direct Access SCSI-2 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 > (cd0:ata1:0:1:0): CAM Status: SCSI Status Error > (cd0:ata1:0:1:0): SCSI Status: Check Condition > (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 > (cd0:ata1:0:1:0): Illegal mode for this track > (cd0:ata1:0:1:0): Unretryable error > (cd0:ata1:0:1:0): cddone: got error 0x6 back > (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 1 0 0 1 0 > (cd0:ata1:0:1:0): CAM Status: SCSI Status Error > (cd0:ata1:0:1:0): SCSI Status: Check Condition > (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 > (cd0:ata1:0:1:0): Illegal mode for this track > (cd0:ata1:0:1:0): Unretryable error > (cd0:ata1:0:1:0): cddone: got error 0x6 back > (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 > (cd0:ata1:0:1:0): CAM Status: SCSI Status Error > (cd0:ata1:0:1:0): SCSI Status: Check Condition > (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 > (cd0:ata1:0:1:0): Illegal mode for this track > (cd0:ata1:0:1:0): Unretryable error > (cd0:ata1:0:1:0): cddone: got error 0x6 back > (cd0:ata1:0:1:0): READ(10). CDB: 28 0 0 0 0 0 0 0 2 0 > (cd0:ata1:0:1:0): CAM Status: SCSI Status Error > (cd0:ata1:0:1:0): SCSI Status: Check Condition > (cd0:ata1:0:1:0): ILLEGAL REQUEST asc:64,0 > (cd0:ata1:0:1:0): Illegal mode for this track > (cd0:ata1:0:1:0): Unretryable error > (cd0:ata1:0:1:0): cddone: got error 0x6 back > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > Trying to mount root from ufs:/dev/ad0s1a > > Maybe the scanner is wrongfully attached? I don't know. > I would really appreciate if you help me . > > =C5=81ukasz Folu=C5=9Bniak > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200512031510.31971.danny>