Date: Fri, 3 Mar 2006 16:40:24 -0500 From: "Joseph Turian" <turian@gmail.com> To: freebsd-questions@freebsd.org, questions@freebsd.org Subject: Re: 6.1-BETA2 AMD64 boot only CD freezes at "module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6 Message-ID: <4dacb2560603031340q322b7152od90f4e869283079a@mail.gmail.com> In-Reply-To: <4dacb2560603031327l6a8befc3ie36afd89d54e9a72@mail.gmail.com> References: <4dacb2560603031327l6a8befc3ie36afd89d54e9a72@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I flubbed that error message slightly, since I have to copy it by hand. :P Sorry about that, here's the correct version: Here is the 6.1-BETA2 AMD64 boot freeze message: Timecounter "TSC" frequency 2009156527 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6 Here is the 6.0 AMD64 boot freeze message: Timecounter "TSC" frequency 2009156417 Hz quality 800 Timecounters tick every 1.000 msec Joseph > > This is slightly modified version of the error I get if I try to 6.0 boot= disc. > > Here is some prior evidence I collected in an earlier version of this > question on list.freebsd.questions. No one seems to know the answer, > so I'm following up here with more information, in the hopes someone > can help me out. (Sorry if anyone minds.) I need to install this > system RSN and I'd prefer to use FreeBSD but the Linux install works > fine in a pinch and FreeBSD won't even boot. Please help! > > Thanks, > > Joseph > > =3D=3D=3D=3D=3D > > From: "Joseph Turian" <tur...@gmail.com> > Newsgroups: list.freebsd.questions > Subject: 6.0 install CD boot freezes at "Timecounters tick every 1.000 ms= ec" > Date: 2 Mar 2006 14:08:30 -0800 > > I'm having difficulty booting FreeBSD from the 6.0 install disc 1 for > AMD64. > I've also tried the boot disk, with the same problem. > > Basically, I'm trying to install on a clean system. Boot with ACPI > *disabled* freezes with: > > Timecounter "TSC" frequency 2009156417 Hz quality 800 > Timecounters tick every 1.000 msec > > > I've googled this message and the recommendation is "boot with ACPI". > But I disabled ACPI in the BIOS *and* I boot with option 2 (no ACPI), > so that doesn't resolve the issue. > > Please help! I'd really like to install FreeBSD and give it a spin. I'd > hate to be forced to install Linux just because it works no problem. > > Thanks, > Joseph > > P.S. If you're interested in my hardware, here's the dmesg output from > the gentoo livecd i686 2006.0 installer cd. I have a SATA disk and an > IDE disk, maybe that's the issue? > > Linux version 2.6.15-gentoo-r5 (root@gravity) (gcc version 3.4.4 > (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Mon Feb 13 20:23:47 > UTC 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007bfc0000 (usable) > BIOS-e820: 000000007bfc0000 - 000000007bfce000 (ACPI data) > BIOS-e820: 000000007bfce000 - 000000007bff0000 (ACPI NVS) > BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) > 1087MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000ff780 > On node 0 totalpages: 507840 > DMA zone: 4096 pages, LIFO batch:0 > DMA32 zone: 0 pages, LIFO batch:0 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 278464 pages, LIFO batch:31 > DMI 2.3 present. > ACPI: RSDP (v000 ACPIAM ) @ 0x000fb870 > ACPI: RSDT (v001 A M I OEMRSDT 0x10000505 MSFT 0x00000097) @ > 0x7bfc0000 > ACPI: FADT (v002 A M I OEMFACP 0x10000505 MSFT 0x00000097) @ > 0x7bfc0200 > ACPI: MCFG (v001 A M I OEMMCFG 0x10000505 MSFT 0x00000097) @ > 0x7bfc0400 > ACPI: OEMB (v001 A M I AMI_OEM 0x10000505 MSFT 0x00000097) @ > 0x7bfce040 > ACPI: DSDT (v001 A0368 A0368001 0x00000001 INTL 0x02002026) @ > 0x00000000 > Intel MultiProcessor Specification v1.4 > Virtual Wire compatibility mode. > OEM ID: TEMPLATE Product ID: CSM APIC at: 0xFEE00000 > Processor #0 15:15 APIC version 16 > I/O APIC #1 Version 17 at 0xFEC00000. > Enabling APIC mode: Flat. Using 1 I/O APICs > Processors: 1 > Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000) > Built 1 zonelists > Kernel command line: root=3D/dev/ram0 init=3D/linuxrc dokeymap > looptype=3Dsquashfs loop=3D/image.squashfs cdroot initrd=3Dgentoo.igz vga= =3D791 > splash=3Dsilent,theme:livecd-2006.0 CONSOLE=3D/dev/tty1 quiet > BOOT_IMAGE=3Dgentoo > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Initializing CPU#0 > CPU 0 irqstacks, hard=3Dc0427000 soft=3Dc041f000 > PID hash table entries: 4096 (order: 12, 65536 bytes) > Detected 2009.214 MHz processor. > Using tsc for high-res timesource > Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized > Console: colour dummy device 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 2005764k/2031360k available (2388k kernel code, 24456k > reserved, 561k data, 220k init, 1113856k highmem) > Checking if this processor honours the WP bit even in supervisor > mode... Ok. > Calibrating delay using timer specific routine.. 4023.16 BogoMIPS > (lpj=3D20115849) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 > 00000001 00000000 00000001 > CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 > 00000001 00000000 00000001 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 > 00000001 00000000 00000001 > mtrr: v2.0 (20020519) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI > Name: 43035350 > ACPI-0292: *** Error: Looking up [0x43035350] (NON-ASCII) > in namespace, AE_BAD_CHARACTER > ACPI-0115: *** Error: acpi_load_tables: Could not load namespace: > AE_BAD_CHARACTER > ACPI-0123: *** Error: acpi_load_tables: Could not load tables: > AE_BAD_CHARACTER > ACPI: Unable to load the System Description Tables > CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 > Total of 1 processors activated (4023.16 BogoMIPS). > ExtINT not setup in hardware but reported by MP table > ENABLING IO-APIC IRQs > ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D0 pin2=3D0 > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > ...trying to set up timer (IRQ0) through the 8259A ... > ..... (found pin 0) ...works. > Brought up 1 CPUs > checking if image is initramfs... it is > Freeing initrd memory: 3941k freed > NET: Registered protocol family 16 > EISA bus registered > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3D4 > PCI: Using MMCONFIG > ACPI: Subsystem revision 20050902 > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > SCSI subsystem initialized > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:05.0 > PCI: Transparent bridge - 0000:00:10.0 > PCI: Using IRQ router default [10de/0260] at 0000:00:0a.0 > PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 11 > PCI->APIC IRQ transform: 0000:00:0a.1[A] -> IRQ 5 > PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 5 > PCI->APIC IRQ transform: 0000:00:0b.1[B] -> IRQ 3 > PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 5 > PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 5 > PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 5 > PCI->APIC IRQ transform: 0000:00:14.0[A] -> IRQ 5 > PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 5 > PCI: Bridge: 0000:00:02.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:04.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:10.0 > IO window: c000-cfff > MEM window: faa00000-faafffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > PCI: Setting latency timer of device 0000:00:04.0 to 64 > PCI: Setting latency timer of device 0000:00:10.0 to 64 > audit: initializing netlink socket (disabled) > audit(1141365136.290:1): initialized > highmem bounce pool size: 64 pages > Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher > SGI XFS with ACLs, security attributes, realtime, large block numbers, > no debug enabled > SGI XFS Quota Management subsystem > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > PCI: Setting latency timer of device 0000:00:02.0 to 64 > pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie03] > PCI: Setting latency timer of device 0000:00:03.0 to 64 > pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie03] > PCI: Setting latency timer of device 0000:00:04.0 to 64 > pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS > assign_interrupt_mode Found MSI capability > Allocate Port Service[pcie00] > Allocate Port Service[pcie03] > initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) > vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, > total 65536k > vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D1 > vesafb: protected mode interface info at c000:d0c0 > vesafb: scrolling: redraw > vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 > vesafb: Mode is VGA compatible > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > enabled > serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A > mice: PS/2 mouse device common for all mice > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > loop: loaded (max 8 devices) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=3Dxx > NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 > NFORCE-MCP51: chipset revision 161 > NFORCE-MCP51: not 100% native mode: will probe irqs later > NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > Probing IDE interface ide0... > input: AT Translated Set 2 keyboard as /class/input/input0 > hda: WDC WD1600JB-00GVA0, ATA DISK drive > input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: ASUS DRW-1608P2S, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > hda: max request size: 1024KiB > hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=3D19457/255/63, > UDMA(100) > hda: cache flushes supported > hda: hda1 > hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) > Uniform CD-ROM driver Revision: 3.20 > md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 > md: bitmap version 4.39 > EISA: Probing bus 0 at eisa.0 > EISA: Detected 0 cards. > NET: Registered protocol family 2 > IP route cache hash table entries: 65536 (order: 6, 262144 bytes) > TCP established hash table entries: 262144 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 262144 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI Shortcut mode > Freeing unused kernel memory: 220k freed > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Setting latency timer of device 0000:00:0b.1 to 64 > ehci_hcd 0000:00:0b.1: EHCI Host Controller > ehci_hcd 0000:00:0b.1: debug port 1 > PCI: cache line size of 64 is not supported by device 0000:00:0b.1 > ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:0b.1: irq 3, io mem 0xfebdfc00 > ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 8 ports detected > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > Initializing USB Mass Storage driver... > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > irq 3: nobody cared (try booting with the "irqpoll" option) > [<c0133a79>] > [<c0133b40>] > [<c0133561>] > [<c01046b3>] > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > [<c0103132>] > handlers: > [<f8850e4a>] > Disabling IRQ #3 > USB Universal Host Controller Interface driver v2.3 > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver > (PCI) > PCI: Setting latency timer of device 0000:00:0b.0 to 64 > ohci_hcd 0000:00:0b.0: OHCI Host Controller > ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:0b.0: irq 5, io mem 0xfebde000 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 8 ports detected > sl811: driver sl811-hcd, 19 May 2005 > ieee1394: Initialized config rom entry `ip1394' > ohci1394: $Rev: 1313 $ Ben Collins <bcoll...@debian.org> > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=3D[5] > MMIO=3D[faaff800-faafffff] Max Packet=3D[2048] > sbp2: $Rev: 1306 $ Ben Collins <bcoll...@debian.org> > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=3D1) > ieee1394: sbp2: Try serialize_io=3D0 for better performance > libata version 1.20 loaded. > sata_nv 0000:00:0e.0: version 0.8 > PCI: Setting latency timer of device 0000:00:0e.0 to 64 > ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 5 > ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 5 > ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 > 88:407f > ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48 > ata1: dev 0 configured for UDMA/133 > scsi0 : sata_nv > ata2: no device found (phy stat 00000000) > scsi1 : sata_nv > Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) > SCSI device sda: drive cache: write back > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) > SCSI device sda: drive cache: write back > sda: unknown partition table > sd 0:0:0:0: Attached scsi disk sda > PCI: Setting latency timer of device 0000:00:0f.0 to 64 > ata3: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD400 irq 5 > ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD408 irq 5 > ata3: no device found (phy stat 00000000) > scsi2 : sata_nv > ata4: no device found (phy stat 00000000) > scsi3 : sata_nv > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000067efab] > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: > dm-de...@redhat.com > ReiserFS: sda: warning: sh-2021: reiserfs_fill_super: can not find > reiserfs on sda > VFS: Can't find ext3 filesystem on dev sda. > VFS: Can't find an ext2 filesystem on dev sda. > SQUASHFS error: Can't find a SQUASHFS superblock on sda > FAT: bogus number of reserved sectors > VFS: Can't find a valid FAT filesystem on dev sda. > Unable to identify CD-ROM format. > UDF-fs: No partition found (1) > XFS: bad magic number > XFS: SB validate failed > ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find > reiserfs on hda > VFS: Can't find ext3 filesystem on dev hda. > VFS: Can't find an ext2 filesystem on dev hda. > SQUASHFS error: Can't find a SQUASHFS superblock on hda > FAT: invalid media value (0x01) > VFS: Can't find a valid FAT filesystem on dev hda. > Unable to identify CD-ROM format. > UDF-fs: No partition found (1) > XFS: bad magic number > XFS: SB validate failed > ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find > reiserfs on hda1 > VFS: Can't find ext3 filesystem on dev hda1. > VFS: Can't find an ext2 filesystem on dev hda1. > SQUASHFS error: Can't find a SQUASHFS superblock on hda1 > FAT: bogus number of reserved sectors > VFS: Can't find a valid FAT filesystem on dev hda1. > Unable to identify CD-ROM format. > UDF-fs: No partition found (1) > XFS: bad magic number > XFS: SB validate failed > ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find > reiserfs on hdc > VFS: Can't find ext3 filesystem on dev hdc. > VFS: Can't find an ext2 filesystem on dev hdc. > SQUASHFS error: Can't find a SQUASHFS superblock on hdc > FAT: bogus number of reserved sectors > VFS: Can't find a valid FAT filesystem on dev hdc. > ISO 9660 Extensions: Microsoft Joliet Level 3 > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > hdc: ide_intr: huh? expected NULL handler on exit > hdc: ATAPI reset complete > ISO 9660 Extensions: RRIP_1991A > VFS: busy inodes on changed media. > eth1394: $Rev: 1312 $ Ben Collins <bcoll...@debian.org> > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] > parport0: irq 7 detected > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. > PCI: Setting latency timer of device 0000:00:14.0 to 64 > eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:14.0 > eth1: no link during initialization. > eth1: no link during initialization. > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error } > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > hdc: ide_intr: huh? expected NULL handler on exit > hdc: ATAPI reset complete > eth1: link up. > VFS: busy inodes on changed media. > fbsplash: console 0 using theme 'default' > fbsplash: switched splash state to 'on' on console 0 > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > eth1: no IPv6 routers present > -- http://www.cs.nyu.edu/~turian/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4dacb2560603031340q322b7152od90f4e869283079a>