Date: Tue, 1 Oct 2013 18:41:54 +0000 (UTC) From: Sergey Kandaurov <pluknet@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r255977 - in head: bin/dd sbin/bsdlabel sbin/ccdconfig sbin/fdisk sbin/gbde sbin/geom/class/eli sbin/geom/class/shsec sbin/geom/class/virstor sbin/gvinum sbin/mount_msdosfs sbin/newfs s... Message-ID: <201310011841.r91IfslI030515@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: pluknet Date: Tue Oct 1 18:41:53 2013 New Revision: 255977 URL: http://svnweb.freebsd.org/changeset/base/255977 Log: Sweep man pages replacing ad -> ada. Approved by: re (blackend) MFC after: 1 week X-MFC note: stable/9 only Modified: head/bin/dd/dd.1 head/sbin/bsdlabel/bsdlabel.8 head/sbin/ccdconfig/ccdconfig.8 head/sbin/fdisk/fdisk.8 head/sbin/gbde/gbde.8 head/sbin/geom/class/eli/geli.8 head/sbin/geom/class/shsec/gshsec.8 head/sbin/geom/class/virstor/gvirstor.8 head/sbin/gvinum/gvinum.8 head/sbin/mount_msdosfs/mount_msdosfs.8 head/sbin/newfs/newfs.8 head/sbin/newfs_msdos/newfs_msdos.8 head/sbin/newfs_nandfs/newfs_nandfs.8 head/sbin/recoverdisk/recoverdisk.1 head/share/man/man4/geom_linux_lvm.4 head/share/man/man5/ext2fs.5 head/share/man/man5/msdosfs.5 head/share/man/man5/reiserfs.5 head/share/man/man8/picobsd.8 head/sys/boot/common/loader.8 head/usr.sbin/boot0cfg/boot0cfg.8 Modified: head/bin/dd/dd.1 ============================================================================== --- head/bin/dd/dd.1 Tue Oct 1 17:51:04 2013 (r255976) +++ head/bin/dd/dd.1 Tue Oct 1 18:41:53 2013 (r255977) @@ -32,7 +32,7 @@ .\" @(#)dd.1 8.2 (Berkeley) 1/13/94 .\" $FreeBSD$ .\" -.Dd January 23, 2009 +.Dd October 1, 2013 .Dt DD 1 .Os .Sh NAME @@ -378,12 +378,12 @@ will exit. .Sh EXAMPLES Check that a disk drive contains no bad blocks: .Pp -.Dl "dd if=/dev/ad0 of=/dev/null bs=1m" +.Dl "dd if=/dev/ada0 of=/dev/null bs=1m" .Pp Do a refresh of a disk drive, in order to prevent presently recoverable read errors from progressing into unrecoverable read errors: .Pp -.Dl "dd if=/dev/ad0 of=/dev/ad0 bs=1m" +.Dl "dd if=/dev/ada0 of=/dev/ada0 bs=1m" .Pp Remove parity bit from a file: .Pp Modified: head/sbin/bsdlabel/bsdlabel.8 ============================================================================== --- head/sbin/bsdlabel/bsdlabel.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/bsdlabel/bsdlabel.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -31,7 +31,7 @@ .\" @(#)disklabel.8 8.2 (Berkeley) 4/19/94 .\" $FreeBSD$ .\" -.Dd March 5, 2011 +.Dd October 1, 2013 .Dt BSDLABEL 8 .Os .Sh NAME @@ -457,9 +457,9 @@ such as and .Cm * , which could be used as a source file for -.Dq Li "bsdlabel -R ad0s1 new_label_file" : +.Dq Li "bsdlabel -R ada0s1 new_label_file" : .Bd -literal -offset 4n -# /dev/ad0s1: +# /dev/ada0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] Modified: head/sbin/ccdconfig/ccdconfig.8 ============================================================================== --- head/sbin/ccdconfig/ccdconfig.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/ccdconfig/ccdconfig.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -28,7 +28,7 @@ .\" .\" $FreeBSD$ .\" -.Dd July 17, 1995 +.Dd October 1, 2013 .Dt CCDCONFIG 8 .Os .Sh NAME @@ -180,7 +180,7 @@ and read it from mdadm --create --chunk=32 --level=0 --raid-devices=2 /dev/md0 \\ /dev/hda1 /dev/hdb1 # Make the RAID-0 just created available on FreeBSD: -ccdconfig -c /dev/ccd0 32 linux /dev/ad0s1 /dev/ad0s2 +ccdconfig -c /dev/ccd0 32 linux /dev/ada0s1 /dev/ada0s2 .Ed .Pp When you create a new ccd disk you generally want to Modified: head/sbin/fdisk/fdisk.8 ============================================================================== --- head/sbin/fdisk/fdisk.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/fdisk/fdisk.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -1,6 +1,6 @@ .\" $FreeBSD$ .\" -.Dd May 24, 2009 +.Dd October 1, 2013 .Dt FDISK 8 .Os .Sh NAME @@ -159,7 +159,7 @@ mounted root device. When called with no arguments, it prints the sector 0 slice table. An example follows: .Bd -literal - ******* Working on device /dev/ad0 ******* + ******* Working on device /dev/ada0 ******* parameters extracted from in-core disklabel are: cylinders=769 heads=15 sectors/track=33 (495 blks/cyl) Modified: head/sbin/gbde/gbde.8 ============================================================================== --- head/sbin/gbde/gbde.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/gbde/gbde.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -31,7 +31,7 @@ .\" .\" $FreeBSD$ .\" -.Dd February 8, 2006 +.Dd October 1, 2013 .Dt GBDE 8 .Os .Sh NAME @@ -207,23 +207,23 @@ used). .Sh EXAMPLES To initialize a device, using default parameters: .Pp -.Dl "gbde init /dev/ad0s1f -L /etc/ad0s1f.lock" +.Dl "gbde init /dev/ada0s1f -L /etc/ada0s1f.lock" .Pp To attach an encrypted device: .Pp -.Dl "gbde attach ad0s1f -l /etc/ad0s1f.lock" +.Dl "gbde attach ada0s1f -l /etc/ada0s1f.lock" .Pp The encrypted device has the suffix .Pa .bde so a typical command to create and mount a file system would be: .Pp -.Dl "newfs /dev/ad0s1f.bde" -.Dl "mount /dev/ad0s1f.bde /secret" +.Dl "newfs /dev/ada0s1f.bde" +.Dl "mount /dev/ada0s1f.bde /secret" .Pp To detach an encrypted device: .Pp -.Dl "gbde detach ad0s1f" +.Dl "gbde detach ada0s1f" .Pp Please notice that detaching an encrypted device corresponds to physically removing it, do not forget to unmount the file system first. @@ -231,11 +231,11 @@ physically removing it, do not forget to To initialize the second key using a detached lockfile and a trivial pass-phrase: .Pp -.Dl "gbde setkey ad0s1f -n 2 -P foo -L key2.lockfile" +.Dl "gbde setkey ada0s1f -n 2 -P foo -L key2.lockfile" .Pp To destroy all copies of the masterkey: .Pp -.Dl "gbde destroy ad0s1f -n -1" +.Dl "gbde destroy ada0s1f -n -1" .Sh SEE ALSO .Xr gbde 4 , .Xr geom 4 Modified: head/sbin/geom/class/eli/geli.8 ============================================================================== --- head/sbin/geom/class/eli/geli.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/geom/class/eli/geli.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd July 5, 2013 +.Dd October 1, 2013 .Dt GELI 8 .Os .Sh NAME @@ -841,10 +841,10 @@ Create an encrypted provider for use by forget their passphrases, so backup the Master Key with your own random key: .Bd -literal -offset indent # dd if=/dev/random of=/mnt/pendrive/keys/`hostname` bs=64 count=1 -# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ad0s1e -# geli backup /dev/ad0s1e /mnt/pendrive/backups/`hostname` +# geli init -P -K /mnt/pendrive/keys/`hostname` /dev/ada0s1e +# geli backup /dev/ada0s1e /mnt/pendrive/backups/`hostname` (use key number 0, so the encrypted Master Key will be re-encrypted by this) -# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ad0s1e +# geli setkey -n 0 -k /mnt/pendrive/keys/`hostname` /dev/ada0s1e (allow the user to enter his passphrase) Enter new passphrase: Reenter new passphrase: @@ -852,9 +852,9 @@ Reenter new passphrase: .Pp Encrypted swap partition setup: .Bd -literal -offset indent -# dd if=/dev/random of=/dev/ad0s1b bs=1m -# geli onetime -d -e 3des ad0s1b -# swapon /dev/ad0s1b.eli +# dd if=/dev/random of=/dev/ada0s1b bs=1m +# geli onetime -d -e 3des ada0s1b +# swapon /dev/ada0s1b.eli .Ed .Pp The example below shows how to configure two providers which will be attached Modified: head/sbin/geom/class/shsec/gshsec.8 ============================================================================== --- head/sbin/geom/class/shsec/gshsec.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/geom/class/shsec/gshsec.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd January 8, 2005 +.Dd October 1, 2013 .Dt GSHSEC 8 .Os .Sh NAME @@ -108,7 +108,7 @@ Exit status is 0 on success, and 1 if th The following example shows how to create a shared secret device. The secret will be split between a slice on a local disk and a USB Pen drive. .Bd -literal -offset indent -gshsec label -v secret /dev/ad0s1 /dev/da0 +gshsec label -v secret /dev/ada0s1 /dev/da0 newfs /dev/shsec/secret .Ed .Pp Modified: head/sbin/geom/class/virstor/gvirstor.8 ============================================================================== --- head/sbin/geom/class/virstor/gvirstor.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/geom/class/virstor/gvirstor.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd August 3, 2012 +.Dd October 1, 2013 .Dt GVIRSTOR 8 .Os .Sh NAME @@ -161,7 +161,7 @@ size .Pq 4 MiB , with two physical devices for backing storage. .Bd -literal -offset indent -.No gvirstor label -v Ar mydata Ar /dev/ad4 Ar /dev/ad6 +.No gvirstor label -v Ar mydata Ar /dev/ada4 Ar /dev/ada6 .No newfs Ar /dev/virstor/mydata .Ed .Pp @@ -170,11 +170,11 @@ From now on, the virtual device will be device entry. To add a new physical device / component to an active virstor device: .Bd -literal -offset indent -.No gvirstor add Ar mydata Ar ad8 +.No gvirstor add Ar mydata Ar ada8 .Ed .Pp This will add physical storage of -.Ar ad8 +.Ar ada8 to .Pa /dev/virstor/mydata device. Modified: head/sbin/gvinum/gvinum.8 ============================================================================== --- head/sbin/gvinum/gvinum.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/gvinum/gvinum.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -28,7 +28,7 @@ .\" .\" $FreeBSD$ .\" -.Dd April 10, 2009 +.Dd October 1, 2013 .Dt GVINUM 8 .Os .Sh NAME @@ -279,27 +279,27 @@ directory with device nodes for objects .El .Sh EXAMPLES -To create a mirror on disks /dev/ad1 and /dev/ad2, create a filesystem, mount, -unmount and then stop +To create a mirror on disks /dev/ada1 and /dev/ada2, create a filesystem, +mount, unmount and then stop .Ic gvinum : .Pp -.Dl "gvinum mirror /dev/ad1 /dev/ad2" +.Dl "gvinum mirror /dev/ada1 /dev/ada2" .Dl "newfs /dev/gvinum/gvinumvolume0" .Dl "mount /dev/gvinum/gvinumvolume0 /mnt" .Dl "..." .Dl "unmount /mnt" .Dl "gvinum stop" .Pp -To create a striped mirror on disks /dev/ad1 /dev/ad2 /dev/ad3 and /dev/ad4 -named "data" and create a filesystem: +To create a striped mirror on disks /dev/ada1 /dev/ada2 /dev/ada3 and +/dev/ada4 named "data" and create a filesystem: .Pp -.Dl "gvinum mirror -s -n data /dev/ad1 /dev/ad2 /dev/ad3 /dev/ad4" +.Dl "gvinum mirror -s -n data /dev/ada1 /dev/ada2 /dev/ada3 /dev/ada4" .Dl "newfs /dev/gvinum/data" .Pp -To create a raid5 array on disks /dev/ad1 /dev/ad2 and /dev/ad3, with stripesize -493k you can use the raid5 command: +To create a raid5 array on disks /dev/ada1 /dev/ada2 and /dev/ada3, +with stripesize 493k you can use the raid5 command: .Pp -.Dl "gvinum raid5 -s 493k /dev/ad1 /dev/ad2 /dev/ad3" +.Dl "gvinum raid5 -s 493k /dev/ada1 /dev/ada2 /dev/ada3" .Pp Then the volume will be created automatically. Afterwards, you have to initialize the volume: @@ -313,9 +313,9 @@ The list command will give you informati Imagine that one of the drives fails, and the output of 'printconfig' looks something like this: .Pp -.Dl "drive gvinumdrive1 device /dev/ad2" +.Dl "drive gvinumdrive1 device /dev/ada2" .Dl "drive gvinumdrive2 device /dev/???" -.Dl "drive gvinumdrive0 device /dev/ad1" +.Dl "drive gvinumdrive0 device /dev/ada1" .Dl "volume myraid5vol" .Dl "plex name myraid5vol.p0 org raid5 986s vol myraid5vol" .Dl "sd name myraid5vol.p0.s2 drive gvinumdrive2 len 32538s driveoffset 265s" @@ -327,7 +327,7 @@ something like this: .Pp Create a new drive with this configuration: .Pp -.Dl "drive gdrive4 device /dev/ad4" +.Dl "drive gdrive4 device /dev/ada4" .Pp Then move the stale subdisk to the new drive: .Pp @@ -344,7 +344,7 @@ might be delayed. Given the configuration as in the previous example, growing a RAID-5 or STRIPED array is accomplished by using the grow command: .Pp -.Dl "gvinum grow myraid5vol.p0 /dev/ad4" +.Dl "gvinum grow myraid5vol.p0 /dev/ada4" .Pp If everything went ok, the plex state should now be set to growable. You can then start the growing with the Modified: head/sbin/mount_msdosfs/mount_msdosfs.8 ============================================================================== --- head/sbin/mount_msdosfs/mount_msdosfs.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/mount_msdosfs/mount_msdosfs.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -30,7 +30,7 @@ .\" .\" $FreeBSD$ .\" -.Dd December 23, 2008 +.Dd October 1, 2013 .Dt MOUNT_MSDOSFS 8 .Os .Sh NAME @@ -182,14 +182,14 @@ Specify text file name with conversion t .El .Sh EXAMPLES To mount a Russian MS-DOS file system located in -.Pa /dev/ad1s1 : +.Pa /dev/ada1s1 : .Pp -.Dl "mount_msdosfs -L ru_RU.KOI8-R -D CP866 /dev/ad1s1 /mnt" +.Dl "mount_msdosfs -L ru_RU.KOI8-R -D CP866 /dev/ada1s1 /mnt" .Pp To mount a Japanese MS-DOS file system located in -.Pa /dev/ad1s1 : +.Pa /dev/ada1s1 : .Pp -.Dl "mount_msdosfs -L ja_JP.eucJP -D CP932 /dev/ad1s1 /mnt" +.Dl "mount_msdosfs -L ja_JP.eucJP -D CP932 /dev/ada1s1 /mnt" .Sh SEE ALSO .Xr mount 2 , .Xr unmount 2 , Modified: head/sbin/newfs/newfs.8 ============================================================================== --- head/sbin/newfs/newfs.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/newfs/newfs.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -28,7 +28,7 @@ .\" @(#)newfs.8 8.6 (Berkeley) 5/3/95 .\" $FreeBSD$ .\" -.Dd June 22, 2011 +.Dd October 1, 2013 .Dt NEWFS 8 .Os .Sh NAME @@ -285,10 +285,10 @@ to find the alternate superblocks if the The size of a sector in bytes (almost never anything but 512). .El .Sh EXAMPLES -.Dl newfs /dev/ad3s1a +.Dl newfs /dev/ada3s1a .Pp Creates a new ufs file system on -.Pa ad3s1a . +.Pa ada3s1a . The .Nm utility will use a block size of 32768 bytes, a fragment size of 4096 bytes Modified: head/sbin/newfs_msdos/newfs_msdos.8 ============================================================================== --- head/sbin/newfs_msdos/newfs_msdos.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/newfs_msdos/newfs_msdos.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -25,7 +25,7 @@ .\" .\" $FreeBSD$ .\" -.Dd July 25, 2010 +.Dd October 1, 2013 .Dt NEWFS_MSDOS 8 .Os .Sh NAME @@ -209,9 +209,9 @@ The maximum file size is 4GB, even if th Exit status is 0 on success and 1 on error. .Sh EXAMPLES Create a file system, using default parameters, on -.Pa /dev/ad0s1 : +.Pa /dev/ada0s1 : .Bd -literal -offset indent -newfs_msdos /dev/ad0s1 +newfs_msdos /dev/ada0s1 .Ed .Pp Create a standard 1.44M file system, with volume label Modified: head/sbin/newfs_nandfs/newfs_nandfs.8 ============================================================================== --- head/sbin/newfs_nandfs/newfs_nandfs.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/newfs_nandfs/newfs_nandfs.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -25,7 +25,7 @@ .\" .\" $FreeBSD$ .\" -.Dd April 11, 2009 +.Dd October 1, 2013 .Dt NEWFS_NANDFS 8 .Os .Sh NAME @@ -58,9 +58,9 @@ Percentage of reserved blocks (5 if not Exit status is 0 on success and 1 on error. .Sh EXAMPLES Create a file system, using default parameters, on -.Pa /dev/ad0s1 : +.Pa /dev/ada0s1 : .Bd -literal -offset indent -newfs_nandfs /dev/ad0s1 +newfs_nandfs /dev/ada0s1 .Ed .Sh SEE ALSO .Xr disktab 5 , Modified: head/sbin/recoverdisk/recoverdisk.1 ============================================================================== --- head/sbin/recoverdisk/recoverdisk.1 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sbin/recoverdisk/recoverdisk.1 Tue Oct 1 18:41:53 2013 (r255977) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd January 5, 2012 +.Dd October 1, 2013 .Dt RECOVERDISK 1 .Os .Sh NAME @@ -104,11 +104,11 @@ Percent complete. .El .Sh EXAMPLES .Bd -literal -# recover data from failing hard drive ad3 -recoverdisk /dev/ad3 /data/disk.img +# recover data from failing hard drive ada3 +recoverdisk /dev/ada3 /data/disk.img # clone a hard disk -recoverdisk /dev/ad3 /dev/ad4 +recoverdisk /dev/ada3 /dev/ada4 # read an ISO image from a CD-ROM recoverdisk /dev/cd0 /data/cd.iso @@ -120,7 +120,7 @@ recoverdisk -r worklist -w worklist /dev recoverdisk /cdrom/file.avi file.avi # If the disk hangs the system on read-errors try: -recoverdisk -b 0 /dev/ad3 /somewhere +recoverdisk -b 0 /dev/ada3 /somewhere .Ed .Sh SEE ALSO Modified: head/share/man/man4/geom_linux_lvm.4 ============================================================================== --- head/share/man/man4/geom_linux_lvm.4 Tue Oct 1 17:51:04 2013 (r255976) +++ head/share/man/man4/geom_linux_lvm.4 Tue Oct 1 18:41:53 2013 (r255977) @@ -25,7 +25,7 @@ .\" .\" $FreeBSD$ .\" -.Dd February 20, 2008 +.Dd October 1, 2013 .Dt GEOM_LINUX_LVM 4 .Os .Sh NAME @@ -72,7 +72,7 @@ Providers: Sectorsize: 512 Mode: r0w0e0 Consumers: -1. Name: ad0s1 +1. Name: ada0s1 Mediasize: 80023716864 (75G) Sectorsize: 512 Mode: r0w0e0 Modified: head/share/man/man5/ext2fs.5 ============================================================================== --- head/share/man/man5/ext2fs.5 Tue Oct 1 17:51:04 2013 (r255976) +++ head/share/man/man5/ext2fs.5 Tue Oct 1 18:41:53 2013 (r255977) @@ -26,7 +26,7 @@ .\" .\" $FreeBSD$ .\" -.Dd May 16, 2006 +.Dd October 1, 2013 .Dt EXT2FS 5 .Os .Sh NAME @@ -53,9 +53,9 @@ file systems. To mount a .Nm volume located on -.Pa /dev/ad1s1 : +.Pa /dev/ada1s1 : .Pp -.Dl "mount -t ext2fs /dev/ad1s1 /mnt" +.Dl "mount -t ext2fs /dev/ada1s1 /mnt" .Sh SEE ALSO .Xr nmount 2 , .Xr unmount 2 , Modified: head/share/man/man5/msdosfs.5 ============================================================================== --- head/share/man/man5/msdosfs.5 Tue Oct 1 17:51:04 2013 (r255976) +++ head/share/man/man5/msdosfs.5 Tue Oct 1 18:41:53 2013 (r255977) @@ -2,7 +2,7 @@ .\" Written by Tom Rhodes .\" This file is in the public domain. .\" -.Dd August 22, 2007 +.Dd October 1, 2013 .Dt MSDOSFS 5 .Os .Sh NAME @@ -21,7 +21,7 @@ based file systems. .Pp The most common usage follows: .Pp -.Dl "mount -t msdosfs /dev/ad0sN /mnt" +.Dl "mount -t msdosfs /dev/ada0sN /mnt" .Pp where .Ar N @@ -40,7 +40,7 @@ It is possible to define an entry in .Pa /etc/fstab that looks similar to: .Bd -literal -/dev/ad0sN /dos msdosfs rw 0 0 +/dev/ada0sN /dos msdosfs rw 0 0 .Ed .Pp This will mount an Modified: head/share/man/man5/reiserfs.5 ============================================================================== --- head/share/man/man5/reiserfs.5 Tue Oct 1 17:51:04 2013 (r255976) +++ head/share/man/man5/reiserfs.5 Tue Oct 1 18:41:53 2013 (r255977) @@ -26,7 +26,7 @@ .\" .\" $FreeBSD$ .\" -.Dd July 23, 2011 +.Dd October 1, 2013 .Dt REISERFS 5 .Os .Sh NAME @@ -53,9 +53,9 @@ file systems. To mount a .Nm volume located on -.Pa /dev/ad1s1 : +.Pa /dev/ada1s1 : .Pp -.Dl "mount -t reiserfs /dev/ad1s1 /mnt" +.Dl "mount -t reiserfs /dev/ada1s1 /mnt" .Sh SEE ALSO .Xr nmount 2 , .Xr unmount 2 , Modified: head/share/man/man8/picobsd.8 ============================================================================== --- head/share/man/man8/picobsd.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/share/man/man8/picobsd.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -1,6 +1,6 @@ .\" -*- nroff-fill -*- .\" $FreeBSD$ -.Dd June 25, 2009 +.Dd October 1, 2013 .Dt PICOBSD 8 .Os .Sh NAME @@ -408,9 +408,9 @@ and the floppy is ready to boot. The same process can be used to store the image on a hard disk (entire volume or one of the slices): .Bd -literal -offset indent -dd if=picobsd.bin of=/dev/ad2 -dd if=picobsd.bin of=/dev/ad2s3 -dd if=picobsd.bin of=/dev/ad2 oseek=NN +dd if=picobsd.bin of=/dev/ada2 +dd if=picobsd.bin of=/dev/ada2s3 +dd if=picobsd.bin of=/dev/ada2 oseek=NN .Ed .Pp The first form will install the image on the entire disk, and it @@ -435,8 +435,8 @@ You have to use the command to properly initialize the label (do not ask why!). One way to do this is .Bd -literal -offset indent -disklabel -w ad0s2 auto -disklabel -e ad0s2 +disklabel -w ada0s2 auto +disklabel -e ada0s2 .Ed .Pp and from the editor enter a line corresponding to the actual partition, e.g.\& Modified: head/sys/boot/common/loader.8 ============================================================================== --- head/sys/boot/common/loader.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/sys/boot/common/loader.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd January 7, 2012 +.Dd October 1, 2013 .Dt LOADER 8 .Os .Sh NAME @@ -972,7 +972,7 @@ autoboot 5 .Pp Set the disk unit of the root device to 2, and then boot. This would be needed in a system with two IDE disks, -with the second IDE disk hardwired to ad2 instead of ad1. +with the second IDE disk hardwired to ada2 instead of ada1. .Bd -literal -offset indent set root_disk_unit=2 boot /boot/kernel/kernel Modified: head/usr.sbin/boot0cfg/boot0cfg.8 ============================================================================== --- head/usr.sbin/boot0cfg/boot0cfg.8 Tue Oct 1 17:51:04 2013 (r255976) +++ head/usr.sbin/boot0cfg/boot0cfg.8 Tue Oct 1 18:41:53 2013 (r255977) @@ -24,7 +24,7 @@ .\" .\" $FreeBSD$ .\" -.Dd February 4, 2012 +.Dd October 1, 2013 .Dt BOOT0CFG 8 .Os .Sh NAME @@ -173,17 +173,17 @@ Image for serial consoles (COM1,9600,8,N .Sh EXAMPLES To boot slice 2 on the next boot: .Pp -.Dl "boot0cfg -s 2 ad0" +.Dl "boot0cfg -s 2 ada0" .Pp To enable just slices 1 and 3 in the menu: .Pp -.Dl "boot0cfg -m 0x5 ad0" +.Dl "boot0cfg -m 0x5 ada0" .Pp To go back to non-interactive booting, use .Xr fdisk 8 to install the default MBR: .Pp -.Dl "fdisk -B ad0" +.Dl "fdisk -B ada0" .Sh SEE ALSO .Xr geom 4 , .Xr boot 8 ,
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201310011841.r91IfslI030515>