From owner-freebsd-questions Sun Oct 3 0:57: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id DD0E614D8D for ; Sun, 3 Oct 1999 00:56:58 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id BAA21935; Sun, 3 Oct 1999 01:15:06 -0700 (PDT) Date: Sun, 3 Oct 1999 01:15:06 -0700 (PDT) From: Alfred Perlstein To: Rach Cc: freebsd-questions@FreeBSD.ORG Subject: Re: questions for freebsd In-Reply-To: <001101bf0d67$c8aae9e0$2c09a2d0@rachael> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Rach wrote: > Questions on freeBSD's file system: > 1. what file system does freeBSD support? UFS, NFS, msdosfs, cd9660+rockridge, NTFS, EXT2FS and more. > 2. Is there a unique file system developed for it? If yes, can you > describe the file system in detail?? > 3. What about disk structure?can you also describe in detail? The 'native' filesystem is UFS, For questions 2 and 3 you'll want to purchase "The design and implementation of the 4.4 BSD operating system" ISBN 0-201-54979-4 It will answer your questions and a lot more. > what were the design goals of the developers of freebsd? > what was it designed to be and why??? FreeBSD was designed from the ground up to be useful for every situation it is used in. -Alfred Perlstein - [bright@rush.net|alfred@freebsd.org] Wintelcom systems administrator and programmer - http://www.wintelcom.net/ [bright@wintelcom.net] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 1:46:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gate.bull.se (bull.se [193.44.17.2]) by hub.freebsd.org (Postfix) with ESMTP id 2EC9514D8D for ; Sun, 3 Oct 1999 01:46:45 -0700 (PDT) (envelope-from mar@bull.se) Received: from bull.se (eq08.bull.se [129.181.241.108]) by gate.bull.se (8.9.3/8.9.3) with ESMTP id KAA05974; Sun, 3 Oct 1999 10:49:11 +0200 Received: from pcmarhem (kloker.bull.se [129.181.241.95]) by bull.se (AIX4.3/UCB 8.8.8/8.8.8) with SMTP id KAA06978; Sun, 3 Oct 1999 10:48:46 +0200 Reply-To: From: "mark rowlands" To: "FreeBSD-questions (E-mail)" Cc: Subject: pcmcia network card problems 3com and Xircom fail to initialize Date: Sun, 3 Oct 1999 10:45:52 +0200 Message-ID: <000001bf0d7b$b3a2e980$5ff1b581@pcmarhem> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG 3.3 Release with 3com 3c589c and or Xircom CEM56 10/100 + 56 modem. files attached below 3com pccardc dumpcis Xircom pccardc dumpcis dmesg kernel configuration pccard.conf (default as far as I am aware) When inserting either card in slot 1 : pccardd no card in database for for ""("") (repeated 3 times) When inserting 3com in slot 1 driver allocation failed for 3com corporation (3 times) When inserting Xircom in slot 1 driver allocation failed for Xircom corporation (3 times) I have switched just about everything off to free up irq's Windows shows that the xircom likes irq3, the 3com irq 9 the both devices seem to want an io range of 1020 - 102f ( reported in the driver resources window) My questions, whilst being many, in essence boil down to one. Where do i find a good explanation of how the card , pcicx and device options in the kernel, the pccard.conf and rc.conf options relate to each other and how (if indeed they do) do these relate to the resources shown as in use by the card and their controllers in windows. It may be worth noting that the 3com worked (mostly) with the PAOified 3.2 release. # Sample PCCARD configuration file # # Removing all IRQ conflicts from this file can't be done because of some # IRQ-selfish PC-cards. So if you want to use some of these cards in # your machine, you will be forced to modify their IRQ parameters from # the following list. # # IRQ == 0 means "allocate free IRQ from IRQ pool" # IRQ == 16 means "do not use IRQ (e.g. PIO mode)" # # $FreeBSD: src/etc/pccard.conf.sample,v 1.24.2.12 1999/09/11 09:36:53 obrien Exp $ # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 3 5 9 10 11 13 15 # Available memory slots memory 0xd4000 96k # 3Com Etherlink III 3C589B, 3C589C card "3Com Corporation" "3C589" config 0x1 "ep0" ? insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 -link0 link1 # insert /etc/pccard_ether ep0 link0 -link1 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete # 3Com Etherlink III 3C589D card "3Com Corporation" "3C589D" config 0x1 "ep0" ? insert echo 3Com Etherlink III inserted insert /etc/pccard_ether ep0 remove echo 3Com Etherlink III removed remove /sbin/ifconfig ep0 delete # 3Com Fast Etherlink 3C574TX card "3Com" "3C574-TX Fast EtherLink PC Ca" config 0x1 "ep0" ? 0x1 insert echo 3Com Fast Etherlink 3C574TX inserted insert /etc/pccard_ether ep0 remove echo 3Com Fast Etherlink 3C574TX removed remove /sbin/ifconfig ep0 delete # Xircom CreditCard Modem card "Xircom" "CreditCard Modem CM-56T" config 0x17 "sio1" ? reset 100 insert echo Xircom CreditCard Modem CM-56T inserted remove echo Xircom CreditCard Modem CM-56T removed # Xircom CreditCard Ethernet+Modem (Modem only !!!) card "Xircom" "CreditCard Ethernet" config 0x23 "sio2" ? insert echo Xircom CreditCard Modem inserted remove echo Xircom CreditCard Modem removed # Xircom CreditCard Ethernet 10/100 + modem (modem only) card "Xircom" "CreditCard Ethernet 10/100 + " config 0x1f "sio3" ? insert echo Xircom CreditCard Modem inserted remove echo Xircom CreditCard Modem removed # Xircom CreditCard Ethernet 10/100 + modem (Ethernet part) card "Xircom" "CreditCard Ethernet 10/100 + Modem 56" config 0x17 "sio3" ? insert echo Xircom CreditCard Modem inserted insert /etc/pccard_ether xe0 remove echo Xircom CreditCard Modem removed remove /sbin/ifconfig xe0 delete # Xircom CreditCard Ethernet 10/100 card "Xircom" "CreditCard 10/100" config 0x1 "xe0" ? insert echo Xircom CreditCard Ethernet inserted insert /etc/pccard_ether xe0 remove echo Xircom CreditCard Ethernet removed remove /etc/pccard_ether xe0 delete # Xircom GlobalACCESS modem card "Xircom" "CreditCard Modem 56 - GlobalA" config 0x1f "sio2" ? insert echo Xircom CreditCard Modem 56 - GlobalACCESS inserted remove echo Xircom CreditCard Modem 56 - GlobalACCESS removed # 3com/USR/Megahertz 3CCM556 card "3Com" "3CXM/3CCM556" config 0x23 "sio2" ? insert echo 3Com PCMCIA 56K Modem inserted remove echo 3Com PCMCIA 56K Modem removed # 3Com/NoteWorthy 56K modem (bundled with Toshiba notebooks) card "Toshiba America" "3CXM056-BNW" config 0x20 "sio1" ? insert echo NoteWorthy 56K PCMCIA Modem inserted remove echo NoteWorthy 56K PCMCIA Modem removed # 3Com Megahertz 3CCE589E* 10 Mbps LAN PC Card card "3Com" "Megahertz 589E" config 0x1 "ep0" ? insert echo 3Com Megahertz Ethernet card inserted insert /etc/pccard_ether ep0 remove echo 3Com Megahertz Ethernet card removed remove /sbin/ifconfig ep0 delete # 3Com/USR/MegaHertz 3CCM156 card "3COM" "3CCM156" config 0x23 "sio2" ? insert echo 3Com PCMCIA 56K modem inserted remove echo 3Com PCMCIA 56K modem removed XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Xircom dumpcis output Code 136 not found Code 136 not found code Unknown ignored code Manufacturer ID ignored Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2 000: 00 ff Attribute memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #3, code = 0x15 (Version 1 info), length = 59 000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43 010: 61 72 64 20 45 74 68 65 72 6e 65 74 20 31 30 2f 020: 31 30 30 20 2b 20 4d 6f 64 65 6d 20 35 36 00 43 030: 45 4d 35 36 00 31 2e 30 30 00 ff Version = 5.0, Manuf = [Xircom],card vers = [CreditCard Ethernet 10/100 + Modem 56] Addit. info = [CEM56],[1.00] Tuple #4, code = 0x0 (Null tuple), length = 8 000: cf c6 99 00 00 00 00 00 Tuple #5, code = 0x0 (Null tuple), length = 5 000: 05 01 0a 11 46 Tuple #6, code = 0x44 (Card init date), length = 4 000: f0 44 6d 24 Tuple #7, code = 0x1a (Configuration map), length = 5 000: 01 3f 80 ff 67 Reg len = 2, config register addr = 0xff80, last config = 0x3f Registers: XXX--XX- Tuple #8, code = 0x1b (Configuration entry), length = 20 000: e7 c1 9d 0f 55 4d 5d 4e e0 17 17 ea 60 e8 02 07 010: f0 bc 8e 20 Config index = 0x27(default) Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported Vcc pwr: Nominal operating supply voltage: 5 x 1V Minimum operating supply voltage: 4.5 x 1V Maximum operating supply voltage: 5.5 x 1V Continuous supply current: 4.5 x 100mA Wait scale Speed = 1.2 x 10 ms RDY/BSY scale Speed = 1.2 x 10 ms Card decodes 23 address lines IRQ modes: IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12 Max twin cards = 0 Misc attr: (Power down supported) Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 1f 08 ea 60 e8 03 07 Config index = 0x1f Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #10, code = 0x1b (Configuration entry), length = 7 000: 17 08 ea 60 f8 02 07 Config index = 0x17 Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #11, code = 0x1b (Configuration entry), length = 7 000: 0f 08 ea 60 f8 03 07 Config index = 0xf Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x3f8 block length = 0x8 Tuple #12, code = 0x1b (Configuration entry), length = 3 000: 3f 08 63 Config index = 0x3f Card decodes 3 address lines, full 8/16 Bit I/O Tuple #13, code = 0x21 (Functional ID), length = 2 000: 02 00 Serial port/modem Tuple #14, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 5c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even, Tuple #15, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 3f 1c 03 03 0f 07 00 01 b5 Data modem services available: Tuple #16, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 0b 00 02 00 b5 Tuple #17, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #18, code = 0x22 (Functional EXT), length = 8 000: 04 06 00 80 c7 cf c6 99 Voice services available: Tuple #19, code = 0x14 (No link), length = 0 Tuple #20, code = 0xff (Terminator), length = 0 2 slots found XXXXXXXXXXXXXXXXXXXXXXXx 3com dumpcis Configuration data for card in slot 1 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3 000: 43 02 ff Attribute memory device information: Device number 1, type EEPROM, WPS = OFF Speed = 150nS, Memory block size = 8Kb, 1 units Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 89 05 PCMCIA ID = 0x101, OEM ID = 0x589 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 06 00 Network/LAN adapter Tuple #5, code = 0x15 (Version 1 info), length = 57 000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69 010: 6f 6e 00 33 43 35 38 39 00 54 50 2f 42 4e 43 20 020: 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32 61 030: 00 30 30 30 30 30 32 00 ff Version = 4.1, Manuf = [3Com Corporation],card vers = [3C589] Addit. info = [TP/BNC LAN Card Ver. 2a],[000002] Tuple #6, code = 0x1a (Configuration map), length = 6 000: 02 03 00 00 01 03 Reg len = 3, config register addr = 0x10000, last config = 0x3 Registers: XX------ Tuple #7, code = 0x1b (Configuration entry), length = 15 000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff Config index = 0x1(default) Interface byte = 0x1 (I/O) Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 3 x 10mA Max current average over 10 ms: 5 x 10mA Power down supply current: 5 x 1mA Wait scale Speed = 7.0 x 100 ns RDY/BSY scale Speed = 7.0 x 100 ns Card decodes 18 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse IRQs: IOCK 1 4 5 6 8 10 11 12 14 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 03 01 71 55 26 26 54 Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 5 x 1V Max current average over 1 second: 2 x 100mA Max current average over 10 ms: 2 x 100mA Power down supply current: 5 x 1mA Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3 000: 00 00 ff Tuple #10, code = 0x14 (No link), length = 0 Tuple #11, code = 0x10 (Checksum), length = 5 000: 89 ff 80 00 00 Checksum from offset -119, length 128, value is 0x0 Tuple #12, code = 0xff (Terminator), length = 218 000: 00 03 00 00 00 00 00 00 43 32 20 54 45 41 4d 2d 010: 45 61 72 6c 20 41 6c 64 72 69 64 67 65 2c 20 52 020: 65 78 20 41 6c 6c 65 72 73 2c 20 52 75 73 73 65 030: 6c 6c 20 43 68 61 6e 67 2c 20 44 61 76 69 64 20 040: 43 68 69 68 2c 20 48 65 72 6d 61 6e 20 4c 61 6f 050: 2c 20 47 65 6e 65 20 4c 69 6e 2c 20 4c 69 61 6e 060: 67 20 4c 69 6e 2c 20 48 69 65 6e 20 4e 67 75 79 070: 65 6e 2c 20 4b 61 70 20 53 6f 68 2c 20 47 61 72 080: 79 20 57 61 6e 67 00 ff ff ff ff ff ff ff ff ff 090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 0d0: ff ff ff ff ff ff ff ff ff ff 2 slots found XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-RELEASE #1: Sat Oct 2 10:24:51 GMT 1999 root@:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P55C (167.05-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x543 Stepping = 3 Features=0x8001bf real memory = 134217728 (131072K bytes) avail memory = 127971328 (124972K bytes) Preloaded elf kernel "kernel" at 0xc027a000. Probing for devices on PCI bus 0: chip0: rev 0x01 on pci0.0.0 chip1: rev 0x01 on pci0.1.0 ide_pci0: rev 0x01 on pci0.1.1 chip2: rev 0x01 on pci0.1.3 vga0: rev 0x00 int a irq 255 on pci0.2.0 pcic0: rev 0x01 int a irq 255 on pci0.10.0 pcic1: rev 0x01 int b irq 255 on pci0.10.1 Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1 not found at 0x2f8 ppc0 not found fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, ovlap, dma, iordis acd0: drive speed 3445KB/sec, 128KB cache acd0: supported read types: CD-R, CD-DA acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm photo disc loaded, unlocked xe0: probe xe0 not found vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface PC-Card VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 3 Initializing PC-card drivers: xe sio Intel Pentium detected, installing workaround for F00F bug changing root device to wd0s2a XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX kernel # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.143.2.22 1999/09/14 22:53:30 jkh Exp $ machine "i386" cpu "I586_CPU" ident GENERIC maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller eisa0 controller pci0 # Floppy drives controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # IDE controller and disks options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # ATAPI devices options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI) # Proprietary or custom CD-ROM Interfaces # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at isa? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support controller card0 device pcic0 at card? device pcic1 at card? # Serial (COM) ports device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 tty irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 at ppbus? # Printer device plip0 at ppbus? # TCP/IP over parallel device ppi0 at ppbus? # Parallel port interface device #controller vpo0 at ppbus? # Requires scbus and da0 # PCI Ethernet NICs. # ISA Ethernet NICs. # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. # requires PCCARD (PCMCIA) support to be activated device xe0 at isa? port? net irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun 1 # Packet tunnel pseudo-device pty 16 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 1 #Berkeley packet filter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 1:49: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from trooper.velocet.net (trooper.velocet.net [216.126.82.226]) by hub.freebsd.org (Postfix) with ESMTP id 5F86A14F84 for ; Sun, 3 Oct 1999 01:49:00 -0700 (PDT) (envelope-from dgilbert@trooper.velocet.net) Received: (from dgilbert@localhost) by trooper.velocet.net (8.9.3/8.9.3) id EAA31980; Sun, 3 Oct 1999 04:49:00 -0400 (EDT) (envelope-from dgilbert) From: David Gilbert MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14327.6267.899595.923700@trooper.velocet.net> Date: Sun, 3 Oct 1999 04:48:59 -0400 (EDT) To: freebsd-questions@freebsd.org Subject: runaway apache processes? X-Mailer: VM 6.71 under 20.4 "Emerald" XEmacs Lucid Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've been having real problems with runaway apache processes with more recent versions of FreeBSD. Apache is configured (by hand) with ssl, php, httpdapy (a python module) and a few others. When this happens, some (sometimes many) httpd processes chew up 100% CPU and need a kill -9 to die. Has anyone else be having this problem? Dave. -- ============================================================================ |David Gilbert, Velocet Communications. | Two things can only be | |Mail: dgilbert@velocet.net | equal if and only if they | |http://www.velocet.net/~dgilbert | are precisely opposite. | =========================================================GLO================ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 2:21: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peach.ocn.ne.jp (peach.ocn.ne.jp [210.145.254.87]) by hub.freebsd.org (Postfix) with ESMTP id 3972214BF6; Sun, 3 Oct 1999 02:20:42 -0700 (PDT) (envelope-from dcs@newsguy.com) Received: from newsguy.com (p21-dn02kiryunisiki.gunma.ocn.ne.jp [210.163.200.118]) by peach.ocn.ne.jp (8.9.1a/OCN) with ESMTP id SAA06264; Sun, 3 Oct 1999 18:20:35 +0900 (JST) Message-ID: <37F71F7F.3C59FFEB@newsguy.com> Date: Sun, 03 Oct 1999 18:18:55 +0900 From: "Daniel C. Sobral" X-Mailer: Mozilla 4.6 [en] (Win98; I) X-Accept-Language: en,pt-BR,ja MIME-Version: 1.0 To: Matthias Buelow Cc: hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: ftp is not fetch References: <19991003072219.F728@altair.mayn.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Matthias Buelow wrote: > > BTW.. although risking to be off-topic by miles, I always liked the way > how NetBSD's ftp(1) (since 1.4 or so) implemented http and ftp URL > fetching and thus eliminated the need for a fetch(1) command. > Couldn't the FreeBSD ftp(1) be enhanced that way, [ObTopic, slime slime] > to use fetch(3) for that purpose? ftp(1) is an ftp client. fetch(1) is file fetching program. They both do things that the other don't. We don't add things to programs that do not belong in the program. Http handling does not belong in ftp(1). This has been convered before. Search the archives. Also, cease and desist, citizen, or the ensuing flame war will turn you into a fine mist. :-) -- Daniel C. Sobral (8-DCS) dcs@newsguy.com dcs@freebsd.org Rule 69: Do unto other's code as you'd have it done unto yours To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 2:37:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chele.cais.net (chele.cais.com [199.0.216.212]) by hub.freebsd.org (Postfix) with ESMTP id DDB3A14C1D for ; Sun, 3 Oct 1999 02:37:15 -0700 (PDT) (envelope-from brian@chele.cais.net) Received: from localhost (brian@localhost) by chele.cais.net (8.9.1/8.9.1) with ESMTP id FAA01265 for ; Sun, 3 Oct 1999 05:32:19 -0400 (EDT) Date: Sun, 3 Oct 1999 05:32:18 -0400 (EDT) From: Brian Mitchell To: freebsd-questions@freebsd.org Subject: Re: ftp is not fetch In-Reply-To: <37F71F7F.3C59FFEB@newsguy.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Daniel C. Sobral wrote: > Matthias Buelow wrote: > > > > BTW.. although risking to be off-topic by miles, I always liked the way > > how NetBSD's ftp(1) (since 1.4 or so) implemented http and ftp URL > > fetching and thus eliminated the need for a fetch(1) command. > > Couldn't the FreeBSD ftp(1) be enhanced that way, [ObTopic, slime slime] > > to use fetch(3) for that purpose? Sounds like netbsd borrowed openbsd code. Openbsd implemented it in ftp because it was the quickest way to get ports working, atleast thats my recollection. I don't think theres a good reason for ftp(1) to support http in general, especially when we have fetch which is significantly smaller. > > ftp(1) is an ftp client. fetch(1) is file fetching program. They > both do things that the other don't. We don't add things to programs > that do not belong in the program. Http handling does not belong in > ftp(1). > > This has been convered before. Search the archives. Also, cease and > desist, citizen, or the ensuing flame war will turn you into a fine > mist. :-) > > -- > Daniel C. Sobral (8-DCS) > dcs@newsguy.com > dcs@freebsd.org > > Rule 69: Do unto other's code as you'd have it done unto yours > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hackers" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 3: 8:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.intekom.com (smtp.intekom.com [196.25.69.22]) by hub.freebsd.org (Postfix) with ESMTP id 308A914C44 for ; Sun, 3 Oct 1999 03:08:17 -0700 (PDT) (envelope-from evablunted@earthling.net) Received: from uta36-01-p57.ec.saix.net ([155.239.168.57] helo=impakt) by mail.intekom.com with smtp (Exim 3.02 #4) id 11XiYD-000340-00 for Freebsd-questions@freebsd.org; Sun, 03 Oct 1999 12:07:29 +0200 Message-ID: <007d01bf0d83$f4ef17d0$0b02a8c0@sunnet.co.za> From: "Langa Kentane" To: "FreeBSD" Subject: Forwarders Date: Sun, 3 Oct 1999 11:27:46 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi y'all I have just been wanting to register a domain in my country's name space but they told me that I should have a forwarder somewhere in the states pref. in the east coast. How do I go about finding a forwarder... do I just ask someone somewhere out there to be a forwarder for me? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 3: 8:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.intekom.com (smtp.intekom.com [196.25.69.22]) by hub.freebsd.org (Postfix) with ESMTP id 128D014C48 for ; Sun, 3 Oct 1999 03:08:18 -0700 (PDT) (envelope-from evablunted@earthling.net) Received: from uta36-01-p57.ec.saix.net ([155.239.168.57] helo=impakt) by mail.intekom.com with smtp (Exim 3.02 #4) id 11XiYE-000340-00 for Freebsd-questions@freebsd.org; Sun, 03 Oct 1999 12:07:31 +0200 Message-ID: <007e01bf0d83$f609d6a0$0b02a8c0@sunnet.co.za> From: "Langa Kentane" To: "FreeBSD" Subject: Help with smaill perl script Date: Sun, 3 Oct 1999 11:33:53 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi I don't know how to use perl and getting a book on it and reading would take too long to solve the small problem that I have. What I want to do is to have a web page showing all the user's home pages that will update dinamically. What I mean it that when you access this page it should show you all the user names and link that to the user's home page. When I add a new user it must show immediately as soon as I hit reload on the browser Langa Kentane Manager: Network Operations Sunshine Networks Tel +27 82 928 1952 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 3: 8:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.intekom.com (smtp.intekom.com [196.25.69.22]) by hub.freebsd.org (Postfix) with ESMTP id 1CC0B14C58 for ; Sun, 3 Oct 1999 03:08:23 -0700 (PDT) (envelope-from evablunted@earthling.net) Received: from uta36-01-p57.ec.saix.net ([155.239.168.57] helo=impakt) by mail.intekom.com with smtp (Exim 3.02 #4) id 11XiYG-000340-00 for Freebsd-questions@freebsd.org; Sun, 03 Oct 1999 12:07:33 +0200 Message-ID: <007f01bf0d83$f7186070$0b02a8c0@sunnet.co.za> From: "Langa Kentane" To: "FreeBSD" Subject: user accounting for web access Date: Sun, 3 Oct 1999 11:39:27 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi What I want to do for my network is have authentication for accessing the web. I have told my router to only accept http and ftp requests only from the proxy server. Now I want my proxy server to ask each and every user that want to access the net for a username and passwd and have user accounting. I want to be able to extract how much the user downloaded and their online time so that they can be billed for internet usage exceeding a certain amount of meg. Can you recommend a free soluiton for me. Thanks in advance Langa Kentane Manager: Network Operations Sunshine Networks Tel +27 82 928 1952 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 3:48:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scotty.masternet.it (scotty.masternet.it [194.184.65.2]) by hub.freebsd.org (Postfix) with ESMTP id 4322214BFF for ; Sun, 3 Oct 1999 03:48:08 -0700 (PDT) (envelope-from gmarco@scotty.masternet.it) Received: from suzy (modem34.masternet.it [194.184.65.44]) by scotty.masternet.it (8.9.3/8.9.3) with ESMTP id MAA81076; Sun, 3 Oct 1999 12:47:52 +0200 (CEST) (envelope-from gmarco@scotty.masternet.it) Message-Id: <4.2.0.58.19991003122831.01342e40@194.184.65.4> X-Sender: gmarco@scotty.masternet.it X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Sun, 03 Oct 1999 12:52:17 +0200 To: "Langa Kentane" , "FreeBSD" From: Gianmarco Giovannelli Subject: Re: Help with smaill perl script In-Reply-To: <007e01bf0d83$f609d6a0$0b02a8c0@sunnet.co.za> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 03/10/99, Langa Kentane wrote: >Hi >I don't know how to use perl and getting a book on it and reading would take >too long to solve the small problem that I have. > >What I want to do is to have a web page showing all the user's home pages >that will update dinamically. What I mean it that when you access this >page it should show you all the user names and link that to the user's home >page. When I add a new user it must show immediately as soon as I hit >reload on the browser Uhm... The easy way to do it is to read the passwd file and make as output HTML code pointing to the user home page, but after you have checked the user has really a public_html dir where he/she has stored his web pages... If you want a sample code here is a very sample skeleton (25 sec of coding:-) #!/usr/bin/perl $public = "/public_html"; setpwent; while(@list = getpwent){ $login = $list[0]; $uid = $list[2]; if ($uid >= 999){ $home = $list[7]; if (-e "$home$public"){ print "$login has an home page\n"; } } } I can send you a new version with CGI.pm after lunch :-) Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://www.giovannelli.it/~gmarco http://www2.masternet.it To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 4:21: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scotty.masternet.it (scotty.masternet.it [194.184.65.2]) by hub.freebsd.org (Postfix) with ESMTP id 4C7B714D70 for ; Sun, 3 Oct 1999 04:20:54 -0700 (PDT) (envelope-from gmarco@scotty.masternet.it) Received: from suzy (modem34.masternet.it [194.184.65.44]) by scotty.masternet.it (8.9.3/8.9.3) with ESMTP id NAA81263; Sun, 3 Oct 1999 13:20:45 +0200 (CEST) (envelope-from gmarco@scotty.masternet.it) Message-Id: <4.2.0.58.19991003131442.0133cf00@194.184.65.4> X-Sender: gmarco@scotty.masternet.it X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Sun, 03 Oct 1999 13:25:09 +0200 To: "Langa Kentane" , "FreeBSD" From: Gianmarco Giovannelli Subject: Re: Help with smaill perl script Cc: freebsd@scotty.masternet.it In-Reply-To: <007e01bf0d83$f609d6a0$0b02a8c0@sunnet.co.za> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 03/10/99, Langa Kentane wrote: >Hi >I don't know how to use perl and getting a book on it and reading would take >too long to solve the small problem that I have. > >What I want to do is to have a web page showing all the user's home pages >that will update dinamically. What I mean it that when you access this >page it should show you all the user names and link that to the user's home >page. When I add a new user it must show immediately as soon as I hit >reload on the browser Here is the CGI.pm (lunch is over :-) #### cut here ### #!/usr/bin/perl use CGI qw(:standard :html3 :netscape); use CGI::Carp; $servername = "kirk.giovannelli.it"; $public = "public_html"; $title = "Your title"; $author = "Your name"; $background = "sample pic"; $dtd="-//W3C//DTD HTML 3.2//EN"; print header(); print start_html( -title=>"$title", -author=>"$author", -dtd=>"$dtd", -background=>"$background", ),"\n"; setpwent; while(@list = getpwent){ $login = $list[0]; $name = $list[6]; $uid = $list[2]; if ($uid >= 999){ $home = $list[7]; if (-e "$home/$public"){ print a({href=>"http://$servername/~$login/"},"$name"),br; } } } print end_html(); ### cut ###### I assume: Your perl is > 5.05 and it is in /usr/bin/perl . You have to chmod 755 this script before it can be executed from web. You have Apache configured to use .pl as cgi binary, otherwise rename it as you want (i.e. users.cgi) I don't know which kind of html rendering do you want, but you can modify without too much effort. If you don't know the CGI.pm coding style, simply add the HTML tags in this way: print "
HI

"; You can use the var inside the print as well... You can try also to reduce part of the code, which is not necessary ... Hope it helps... Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://www.giovannelli.it/~gmarco http://www2.masternet.it To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 4:24:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mfo01.iij.ad.jp (mfo01.iij.ad.jp [202.232.2.118]) by hub.freebsd.org (Postfix) with ESMTP id 8F36A14D70; Sun, 3 Oct 1999 04:24:22 -0700 (PDT) (envelope-from sweet@rr.iij4u.or.jp) Received: from rr.iij4u.or.jp (rr.iij4u.or.jp [210.130.0.42]) by mfo01.iij.ad.jp (8.8.8/MFO1.3) with ESMTP id UAA00247; Sun, 3 Oct 1999 20:24:13 +0900 (JST) Received: from h141.p019.iij4u.or.jp (h141.p019.iij4u.or.jp [210.130.19.141]) by rr.iij4u.or.jp (8.8.8+2.2IIJ/4U1.1) with SMTP id UAA02386; Sun, 3 Oct 1999 20:22:38 +0900 (JST) Message-Id: <199910031122.UAA02386@rr.iij4u.or.jp> X-Authentication-Warning: rr.iij4u.or.jp: h141.p019.iij4u.or.jp [210.130.19.141] didn't use HELO protocol X-Sender: sweet@rr.iij4u.or.jp X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.2-J (32) Date: Sun, 03 Oct 1999 20:22:36 +0900 To: Warikiri-com From: Warikiri-com Subject: =?ISO-2022-JP?B?GyRCSGtMKSROJTMlXyVlJUslMSE8JTclZyVzISobKEo=?= =?ISO-2022-JP?B?GyRCISobKEo=?= Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-2022-JP" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG $B#S#E#X%U%l%s%I!&#S#M%W%l%$%Q!<%H%J!$9$k5.J}$N0Y$N2q0w(J $B@)EA8@HD!#(J $B$b$A$m$s??7u$K8r:]Aj$9$kCK=w$N$_$J(J $B$5$s$K;22C$7$F$$$?$@$/0Y$K3+@_$7$^$7$?!*(J $B!X(Jwarikiri.com$B!Y$G$O!"KhF|@lB0$N%9%?%C%U$,%"%/%;%9$NB?$$#9#00J>e$NEA8@(J $BHD$d%a!<%j%s%0%j%9%H!"%"%@%k%H%j%s%/=8!"$^$?!"Bg&MQ%Q%=%3%sDL?.%M%C%H(J $B$J$I$KD>@\=q$-9~$_$K$h$j!V=w@-;22C@\4+M6$b4^$a$k$H!"#2#0#0?M0J>e$N=w@-$KKhF|(J $B%"%W%m!<%A$r$+$1!"$=$NB>;(;o$J$I$X$N9-9p7G:\!J7n4V#1#0#0K|0J>eEj;qCf!*!K(J $B$d5-;v7G:\$b7QB3E*$KAw!W$d!"F?L>$G(J $B$N;22C$b$b$A$m$s#O#K!*$H$K$+$/%F!<%^$O!V3d$j@Z$C$?%*%H%J$N8r:]!W!#(J $B!VFyBN4X78$@$1!W$H3d$j@Z$C$?%*%H%J$N8r:]!"!V%"%V%N!<%^%k$J2w3Z$rBN83$9$k(J $B0Y$@$1!W$N3d$j@Z$C$?8r:]!"!VH`;a!JH`=w!K$K$O8@$($J$$@-E*$JM_5a$rK~$?$90Y(J $B$@$1!W$J$I$N3d$j@Z$C$?8r:](J...$B$I$s$JL\E*$G$"$l!"!X(Jwarikiri.com$B!Y$GF1$8L\(J $BE*!"F1$8M_5a!"F1$8G:$_!"F1$8@-JJ$r;}$C$?J}$?$A$H%3%_%e%K%1!<%7%g%s$r$H$C(J $B$F$$$?$@$-!"8r:]$X$NBh0lJb$H$7$F2<$5$$!*A4NO$G5.J}$N!V=P2q$$!W$r%5%]!<%H(J $B$7$^$9!*!*(J $B$^$?:#7n$+$i!"$^$@%a%s%P!<$G$O$J$$J}$G$b!XBN83%l%]!<%H!Y$,1\Mw$G$-$k$h$&(J $B$K$J$j$^$7$?!*!*(J $B!X(Jwarikiri.com$B!Y$G\:Y$O%[!<%`%Z!<%8$G0FFbCf!*$5$C$=$/%"%/%;%9!*!*(J $B!!!!!|!!:#$9$0%"%/%;%9!*!!"*"*"*"*!!(Jhttp://www.mail.warikiri.com/$B!!!|(J $B!!!!!!!!!!"(FbMF$r40A4$KLOJo$7$?0- Date: Sun, 3 Oct 1999 13:25:54 +0200 From: Harold Gutch To: Matthias Buelow , hackers@FreeBSD.ORG Cc: freebsd-questions@FreeBSD.ORG Subject: Re: your mail References: <19991003072219.F728@altair.mayn.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93.2i In-Reply-To: <19991003072219.F728@altair.mayn.de>; from Matthias Buelow on Sun, Oct 03, 1999 at 07:22:19AM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Oct 03, 1999 at 07:22:19AM +0200, Matthias Buelow wrote: > BTW.. although risking to be off-topic by miles, I always liked the way > how NetBSD's ftp(1) (since 1.4 or so) implemented http and ftp URL > fetching and thus eliminated the need for a fetch(1) command. > Couldn't the FreeBSD ftp(1) be enhanced that way, [ObTopic, slime slime] > to use fetch(3) for that purpose? > > (Or just "steal" the NetBSD implementation, FreeBSD aren't the Knights > who say NIH, I would hope.) > NetBSD's ftp(1), was stolen^Wadded to FreeBSD quite a while ago, I think it happened around 2.2.2. Our ftp(1) has HTTP and FTP-support since then. It doesn't use fetch(3) though, but I guess one can live with that :). bye, Harold -- Sleep is an abstinence syndrome wich occurs due to lack of caffein. Wed Mar 4 04:53:33 CET 1998 #unix, ircnet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5: 1:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from logatome.micronet.fr (logatome-2.francenet.fr [193.149.96.2]) by hub.freebsd.org (Postfix) with ESMTP id 7A7DA14D18 for ; Sun, 3 Oct 1999 05:01:40 -0700 (PDT) (envelope-from e-masson@kisoft-services.com) Received: from kisoft-services.com ([193.149.110.64]) by logatome.micronet.fr (8.8.8/8.8.8) with ESMTP id NAA22196; Sun, 3 Oct 1999 13:58:18 +0200 (CEST) Message-ID: <37F7451F.EE06DA1E@kisoft-services.com> Date: Sun, 03 Oct 1999 13:59:27 +0200 From: Eric MASSON Organization: Kisoft Services X-Mailer: Mozilla 4.6 [fr] (WinNT; I) X-Accept-Language: fr MIME-Version: 1.0 To: maar@bull.se Cc: "FreeBSD-questions (E-mail)" Subject: Re: pcmcia network card problems 3com and Xircom fail to initialize References: <000001bf0d7b$b3a2e980$5ff1b581@pcmarhem> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, mark rowlands a écrit : > > 3.3 Release with 3com 3c589c add ep0 to your kernel config file << device ep0 at isa? port? net irq? >> (maybe the syntax is not quite exact, take the standard line and remove all values on options), the fact is that you must have the driver in kernel. > Xircom CEM56 10/100 + 56 modem. This card seems to use sio3 but sio3 is disabled in your kernel config file. Hope it helps Regards Eric MASSON -- Any opinions expressed above | Murphy's Law Corollary : are my own, not Kisoft's | Murphy was an optimist. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5: 8:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 25AFE14CFC for ; Sun, 3 Oct 1999 05:08:25 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 32207 invoked from network); 3 Oct 1999 12:08:24 -0000 Received: from unknown (HELO mayfly.force9.net) (195.166.128.28) by cask.force9.net with SMTP; 3 Oct 1999 12:08:24 -0000 Received: (qmail 11796 invoked from network); 3 Oct 1999 12:08:23 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.102.182) by mayfly.plus.net.uk with SMTP; 3 Oct 1999 12:08:23 -0000 Message-ID: <37F74720.DC43066F@sinclairassoc.force9.co.uk> Date: Sun, 03 Oct 1999 13:08:00 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: Joe@FreeBSD.ORG, \@FreeBSD.ORG, "Marcus\" Clarke "@FreeBSD.ORG Cc: "Jonathan E. Lyons" , FreeBSD-questions@FreeBSD.ORG Subject: Re: SAMBA passwords/Encryption References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Thanks for your help with SAMBA. I now have it up and running and am delighted with the way it works. Yes, initially configuring SAMBA passwords by hand is a bit tedious and keeping them in sync with /etc/passwds is OK provided there are not too many users. For me the ../sysutils/webmin tool is overkill, but for larger systems is probably ideal. Incidentally I was looking for a way to mount the Windows shares on the FreeBSD box and couldn't find smbmount. Having read the archives I installed Sharity-light from the 3rd CD-ROM (version 3.2-RELEASE) and it works *very* well indeed. Curiously shlight allows me to type in *any* password known to the Windows 98 machine and connect, irrespective of user name. I guess NT is less forgiving, but don't have NT box to test this out. I have two further questions about smbclient and sharity light, posted under separate threads because neither are to do with passwords. Thanks again for helping to get the passwords sorted Ric Joe \"Marcus\" Clarke wrote: > > /usr/ports/sysutils/webmin offers a web-based administration tool. Users > edited with this tool will also have their Samba stuff modified. It's > GUI, and adds web bloat, but the tool is pretty cool. > > Joe Clarke > > On Fri, 1 Oct 1999, Jonathan E. Lyons wrote: > > > > > Just out of curiosity, is there a way to use samba with encrypted passwords > > without having to create new users with the smbpasswd utility? I'd like my > > users to use the same username and password defined in the master password > > files... > > > > Thanks!... > > > > > > > > >If you're using WinNT SP3 or higher (or 98), then you need to make sure > > >you're using encrypted passwords in samba. > > > > > >The line to add to the global section of your samba config is: > > > > > >encrypt passwords = Yes > > > > > >Then, you add accounts via the smbpasswd utility. The samba password file > > >resides in /usr/local/private/smbpasswd. > > > > > >Joe Clarke > > > > > >On Fri, 1 Oct 1999, Richard Morte wrote: > > > > > >> Hi, > > >> > > >> I have SAMBA configured for FReeBSD and a number of Win machines. I can > > >see > > >> all the UNIX shares from the Win boxes. Those that have no restrictions > > >> applied in smb.conf (eg the /tmp share) will allow file transfer to and > > >from > > >> these directories; but Windows will not allow access to those directories > > >> that have restrictions (eg to /home/ric) and require a password. > > >> > > >> Windows returns the message: The password is incorrect. Try again. > > >> > > >> Is this a problem at the Windows end (something to do with profiles???) or > > >> is it that Samba needs to be configured to lookup passwords? At the moment > > >> valid usernames and passwords have been created only for UNIX logons (i.e. > > >> /etc passwds). > > >> > > > > Jonathan E. Lyons > > parrothd@midwest.net Nucleus Consulting > > ICQ # 14226912 www.nucleusconsulting.com > > Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD! > > Pager # 7732511967@mobile.att.net > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5:32:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 0ABD214D6C for ; Sun, 3 Oct 1999 05:32:28 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 1094 invoked from network); 3 Oct 1999 12:32:27 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.102.127) by cask.force9.net with SMTP; 3 Oct 1999 12:32:27 -0000 Message-ID: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> Date: Sun, 03 Oct 1999 13:31:57 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: NSLINT and DNS configuration Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Has anyone used nslint to check the dns configuration? I just used it and it reports the following: missing address A localhost. -> 127.0.0.1 missing pointer PTR localhost.at.home -> 127.0.0.1 127.0.0.1 in use by localhost.at.home & localhost. I have checked the configuration and localhost does seem to be clearly mapped to 127.0.0.1 and vice-versa. This seems to be confirmed by the final line of nslint's output. Are these "errors" due to nslint's inability to find it's way through the config files ( I shouldn't trust nslint's output) or has it found something I should investigate further (nslint is good and I've clearly got it wrong)? All feedback on nslint welcome. Cheers, Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5:32:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id E576C14D6C for ; Sun, 3 Oct 1999 05:32:39 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 1101 invoked from network); 3 Oct 1999 12:32:38 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.102.127) by cask.force9.net with SMTP; 3 Oct 1999 12:32:38 -0000 Message-ID: <37F74CF6.62AEB7A5@sinclairassoc.force9.co.uk> Date: Sun, 03 Oct 1999 13:32:54 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: Sharity-Light errors Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have sharity-light installed to give the FreeBSD box a view on the windows machines comprising the rest of the network. I get the following message reported (but only occasionally): Oct 2 18:02:41 sparky shlight[1346]: Kernel: smb_receive: receive error: -5 Any clues what it means? Regards, Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5:32:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 650B914FE9 for ; Sun, 3 Oct 1999 05:32:45 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 1106 invoked from network); 3 Oct 1999 12:32:44 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.102.127) by cask.force9.net with SMTP; 3 Oct 1999 12:32:44 -0000 Message-ID: <37F74CFD.14F07AD7@sinclairassoc.force9.co.uk> Date: Sun, 03 Oct 1999 13:33:01 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: Printing FROM FreeBsd to Windows Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, SMBCLIENT allows a FreeBSD user to print a file to a shared printer on a windows machine: # smbclient \\\\fredspc\\epson \> print /dir/dir/filename etc. This gives very simple printing of files, but is a bit limited. Has anyone discovered if it is possible to attach a shared printer as a FreeDSD resource so that you can print to it from within applications? That is, have the shared (windows) printer appear alongside lp, for example? If anyone has had any success with this I'd like to hear from you. Thanks in advance, Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5:41: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id 2D65A1500B for ; Sun, 3 Oct 1999 05:40:53 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.143]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA6A8C; Sun, 3 Oct 1999 14:40:52 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA24697; Sun, 3 Oct 1999 14:35:14 +0200 (CEST) (envelope-from asmodai) Date: Sun, 3 Oct 1999 14:35:13 +0200 From: Jeroen Ruigrok/Asmodai To: J McKitrick Cc: Doug , freebsd-questions@FreeBSD.ORG Subject: Re: non-gnome/KDE icq for FreeBSD ? Message-ID: <19991003143513.A24636@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 11:18], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: >Any thoughts on which is better? And do i have to get it through the >ports collection at the main site? I sue Licq 0.61 or something like that without much problems. They are in /usr/ports Just do a make search key=licq in /usr/ports Hope this helps, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 5:44:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chmls05.mediaone.net (ne.mediaone.net [24.128.1.70]) by hub.freebsd.org (Postfix) with ESMTP id 18C371500B for ; Sun, 3 Oct 1999 05:44:50 -0700 (PDT) (envelope-from sderdau@ne.mediaone.net) Received: from ne.mediaone.net (sderdau.ne.mediaone.net [24.218.2.59]) by chmls05.mediaone.net (8.8.7/8.8.7) with ESMTP id IAA08721; Sun, 3 Oct 1999 08:44:40 -0400 (EDT) Message-ID: <37F74FD2.856E42C2@ne.mediaone.net> Date: Sun, 03 Oct 1999 08:45:06 -0400 From: "Stephen A. Derdau" X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.2.5-15 i586) X-Accept-Language: en MIME-Version: 1.0 To: Greg Lehey Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Is someone trying to hack my system ? References: <37F674E0.619A860F@ne.mediaone.net> <19991003121827.M40186@freebie.lemis.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Greg Lehey wrote: > [Format recovered--see http://www.lemis.com/email/email-format.html] > > On Saturday, 2 October 1999 at 17:10:56 -0400, Stephen Derdau wrote: > > Subject: Is someone trying break in ? > > > >> Date: Sat, 02 Oct 1999 17:08:57 -0400 > >> From: Stephen Derdau > >> To: freebsd-questions@ne.mediaone.net > >> > >> I've kinda been working on my security on my systems. IPFW ! > >> Now I'm seeing stuff like this: > >> > >> ipfw 65534 Deny UDP 167.216.187.155:1089 24.218.2.59:1025 in via ed0 > >> ipfw 65534 Deny UDP 24.218.3.41:520 24.218.3.255:520 in via ed0 > >> ipfw: 65534 Deny UDP 167.216.187.155:1089 24.218.2.59:1025 in via ed0 > >> ipfw: 65534 Deny UDP 24.218.2.178:1455 255.255.255.255:8780 in via ed0 > >> ipfw: 65534 Deny UDP 24.218.2.178:1460 255.255.255.255:28001 in via ed0 > >> ipfw: 65534 Deny UDP 24.218.2.49:27901 255.255.255.255:27910 in via ed0 > >> 65534 Deny UDP 24.218.2.127:8093 255.255.255.255:8349 in via ed0 > >> > >> I'm seeing alot of this every few seconds and I'm wondering if this > >> means someone is hacking my system or has or is trying. > > Since your own machine is 24.218.2.59, it would be reasonable to > assume that most of these addresses are on your local net. > 167.216.187.155 is web-associates-187-155.digisle.net. Do you > recognize them? How far away are they? These things could be as > simple as some kind of broadcast packet. > > The rest of your message appears to be a repetition. > > Greg > -- > When replying to this message, please copy the original recipients. > For more information, see http://www.lemis.com/questions.html > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key No I don't know web-associates. Most of the others are in my same domain ne.mediaone.net. here is another one not in my domain. Name: www.rc-pilot.com Address: 209.44.26.6 ipfw: 1800 Deny TCP 209.44.26.6:25751 24.218.2.59:1080 in via ed0 These are kinda diffrent. The ip addresses do not come back with anything via nslookup. Also the number range is diffrent. 65534 Deny ICMP:8.0 24.30.218.50 24.218.2.59 ipfw: 200 Deny TCP 192.168.51.89:80 24.218.2.59:1975 Deny TCP 192.168.51.88:80 24.218.2.59:2133 Thanks for any insight. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 6:28:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hqsmtp.mks.com (hqsmtp.mks.com [198.73.192.3]) by hub.freebsd.org (Postfix) with ESMTP id 9BC2414CBF for ; Sun, 3 Oct 1999 06:28:32 -0700 (PDT) (envelope-from djfiande@julian.uwo.ca) Received: from hqntexch.mks.com (hqntexch.mks.com [1.0.0.105]) by hqsmtp.mks.com (Postfix) with ESMTP id 9F0335901D for ; Sun, 3 Oct 1999 09:24:27 -0400 (EDT) Received: from p18.dialup.mks.com ([198.73.107.118]) by hqntexch.mks.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2448.0) id TVXY9W4G; Sun, 3 Oct 1999 09:28:31 -0400 Date: Sun, 3 Oct 1999 09:23:31 -0400 (EDT) From: "David J. Fiander" X-Sender: davidf@localhost.waterloo.on.ca To: freebsd-questions@freebsd.org Subject: D-Link 528 NIC? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The phone company up here is distributing said card as part of the bundle for their aDSL offering. Does 3.3 support it? The D-Link folks make a linux driver available that has the word "realtek" splattered all over it, so would the realtec FBSD driver work for me? - David -- David J. Fiander | Stupidity (May Subd Geog) Incipient Librarian | - Library of Congress Subject Headings To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 6:49:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from www.keycomp.net (www.keycomp.net [207.44.1.33]) by hub.freebsd.org (Postfix) with ESMTP id D44D714BEF for ; Sun, 3 Oct 1999 06:49:09 -0700 (PDT) (envelope-from billieakay@yahoo.com) Received: from bopper (kc-rmt07.keycomp.net [207.44.1.9]) by www.keycomp.net (8.8.5/SCO5) with SMTP id JAA04879 for ; Sun, 3 Oct 1999 09:55:40 -0400 (EDT) Message-ID: <006d01bf0da6$018b45a0$01010101@bopper> From: "Bill A. K." To: "FreeBSD Questions" Subject: Voodoo Banshee Problem Date: Sun, 3 Oct 1999 09:48:37 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I've got a 3D Blaster Banshee video card with the Voodoo Banshee chipset, and I just set up a brand new install of FreeBSD 3.2-RELEASE, and I downloaded XFree86 3.3.5 directly from XFree86 and I installed the system as Kernel Developer, modified some source so my USB Mouse dosen't crash the system (i've done this before with other video adapters, so thats not the prob) then i made my kernel config file, recompiled the kernel, rebooted, installed XFree86 according to their instructions, then I ran the XF86Setup, and it started up OK. I selected Voodoo Banshee(Generic) for my card and set my res and everything, (I tried both 640x480 and 1024x768, 800x600 gave me some probs but dont worry about that). X seems to work fine when its running, but as soon as I exit X (even after XF86Setup exits) the textmode display seems to be skinnier horizontally( the top and bottom sides appear to be crunched), and theres an area up above that flickers. if i start X up again it looks like everything's working ok but when i exit the same thing happens. If someone can help me i'd really appreciate it. Here's my system config: AMD K6-2 400 MHz 256 MB RAM Creative Labs 3D Blaster Banshee Ensoniq AudioPCI ES1370 12 GB Quantum HD (for Windows 98) 1 GB Connor HD (for FreeBSD) NEC MultiSync 3FGe Monitor And questions about my config, just ask me :) Thanks in advance. Bill billieakay@yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 7: 8:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from po3.wam.umd.edu (po3.wam.umd.edu [128.8.10.165]) by hub.freebsd.org (Postfix) with ESMTP id B98EB14E58 for ; Sun, 3 Oct 1999 07:08:14 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac3.wam.umd.edu (root@rac3.wam.umd.edu [128.8.10.143]) by po3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id KAA19381; Sun, 3 Oct 1999 10:08:02 -0400 (EDT) Received: from rac3.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac3.wam.umd.edu (8.9.3/8.9.3) with SMTP id KAA05888; Sun, 3 Oct 1999 10:08:08 -0400 (EDT) Received: from localhost (culverk@localhost) by rac3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id KAA05884; Sun, 3 Oct 1999 10:08:07 -0400 (EDT) X-Authentication-Warning: rac3.wam.umd.edu: culverk owned process doing -bs Date: Sun, 3 Oct 1999 10:08:07 -0400 (EDT) From: Kenneth Wayne Culver To: "Craig C. Brunner(CCB)" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Kernel sources broken....for 3.3 In-Reply-To: <000901bf0d3f$96b4df40$eb9b58d8@snowbox> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG If you havn't downloaded the base source dist, that will happen. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Sat, 2 Oct 1999, Craig C. Brunner(CCB) wrote: > Im trying to install the kernel sources on a 3.3 system with the > ssys.**'s and i dl them and i get a tar error about how the format is > violated when i run install.sh.... I think the files are broekn.. i > got them from cdrom.com and have redownloaded them twice > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 7:52: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web603.mail.yahoo.com (web603.mail.yahoo.com [128.11.68.167]) by hub.freebsd.org (Postfix) with SMTP id 9B0ED14EFA for ; Sun, 3 Oct 1999 07:51:59 -0700 (PDT) (envelope-from dennisjun@yahoo.com) Message-ID: <19991003145312.27128.rocketmail@web603.mail.yahoo.com> Received: from [206.47.244.94] by web603.mail.yahoo.com; Sun, 03 Oct 1999 07:53:12 PDT Date: Sun, 3 Oct 1999 07:53:12 -0700 (PDT) From: Dennis Jun Subject: Re: D-Link 528 NIC? To: "David J. Fiander" Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm on the same service from Sympatico, except in Toronto. Yes, FreeBSD supports the card, becuase it's NE2000 compatible. Just use ed0 and it should do the trick. --- "David J. Fiander" wrote: > The phone company up here is distributing said card as part of > the bundle for their aDSL offering. Does 3.3 support it? The > D-Link folks make a linux driver available that has the word > "realtek" splattered all over it, so would the realtec FBSD > driver work for me? > > - David > > -- > David J. Fiander | Stupidity (May Subd Geog) > Incipient Librarian | - Library of Congress Subject Headings > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > ===== PGP public key: http://i.am/dennisjun/ or http://dennisjun.i.am/ __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 8:25:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bingnet2.cc.binghamton.edu (bingnet2.cc.binghamton.edu [128.226.1.18]) by hub.freebsd.org (Postfix) with ESMTP id 2614E14DE0 for ; Sun, 3 Oct 1999 08:25:14 -0700 (PDT) (envelope-from zzhang@cs.binghamton.edu) Received: from sol.cs.binghamton.edu (cs1-gw.cs.binghamton.edu [128.226.171.72]) by bingnet2.cc.binghamton.edu (8.9.3/8.9.3) with SMTP id LAA29714 for ; Sun, 3 Oct 1999 11:25:13 -0400 (EDT) Date: Sun, 3 Oct 1999 11:10:45 -0400 (EDT) From: Zhihui Zhang To: freebsd-questions@freebsd.org Subject: Install FreeBSD from another machine Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a machine running FreeBSD 3.3-Release. Is it possible to configure that machine so that I can install future machines from that machine? Please give me some directions on how to do so. Thanks for any help. -------------------------------------------------- Zhihui Zhang. Please visit http://www.freebsd.org -------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 8:30:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 266A414DE0 for ; Sun, 3 Oct 1999 08:30:16 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11XnaZ-000JnZ-00; Sun, 3 Oct 1999 16:30:15 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id QAA75614 for ; Sun, 3 Oct 1999 16:30:15 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Sun, 3 Oct 1999 16:30:15 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: freebsd's life expectancy Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I don't really want to start a flame war, but... I just installed freebsd and i LOVE it. SHould i be concerned that freeBSD will die out someday, since it is not really a commerical enterprise, but is supported by volunteers? jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 8:47:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dirac.th.physik.uni-bonn.de (dirac.th.physik.uni-bonn.de [131.220.161.119]) by hub.freebsd.org (Postfix) with ESMTP id 8BE1914FCD for ; Sun, 3 Oct 1999 08:47:12 -0700 (PDT) (envelope-from conrad@th.physik.uni-bonn.de) Received: from merlin.th.physik.uni-bonn.de (merlin.th.physik.uni-bonn.de [131.220.161.121]) by dirac.th.physik.uni-bonn.de (8.9.3/8.9.3) with SMTP id RAA01501 for ; Sun, 3 Oct 1999 17:46:11 +0200 (CEST) Received: (qmail 51582 invoked by uid 145); 3 Oct 1999 15:46:10 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 3 Oct 1999 15:46:10 -0000 Date: Sun, 3 Oct 1999 17:46:10 +0200 (CEST) From: Jan Conrad To: Ulairi Cc: Questions Subject: RE: Access control for SCSI-CD-R In-Reply-To: <000b01bf0d25$873aec40$2dc4edd0@ulairi> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Ulairi On Sat, 2 Oct 1999, Ulairi wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > I could be wrong, but won't changing permissions on /dev/cd0 with > chmod/chown do the trick? Unfortunately not - cdrecord uses the cam subsystem directly. It seems the best is to make cdrecord setgid root (according to the READMEs) many thanks for your answer anyway Jan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 8:56:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id 979F514FCD for ; Sun, 3 Oct 1999 08:56:09 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id UAA04131; Sun, 3 Oct 1999 20:53:54 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id VAA00845; Sun, 3 Oct 1999 21:06:04 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id UAA00557; Sun, 3 Oct 1999 20:32:00 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Sun, 3 Oct 1999 20:31:57 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Greg Lehey Cc: Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: <19991003093310.E40186@freebie.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Sun, 3 Oct 1999, Greg Lehey wrote: > > > > I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will > > have nearly all the drivers configurable to run as modules or compiled ^^^^^^^^^^^^^^^^^^^^^^ it smells like it will be able to run on 4Mb of RAM. is that correct ? > > into the kernel. > > Well, there isn't much alternative, and that's the way it is with > 3.3-RELEASE. There will be relatively few differences in 4.0, though > some programs will attempt to load a module if they find it isn't in > the kernel. > > Greg > -- > When replying to this message, please copy the original recipients. > For more information, see http://www.lemis.com/questions.html > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/do3+RxlWKN2EXhAQGhXQMAiCvRucNt3qkBOpKK4+G9cIT5vueHtTi6 6CYDh+7JAHYHdcfVSdN6gCmEtg/1ql82saRvII9V+tKVU0iDLobeG7sNrgwrUwKg N46OAeVG2QDJZv5u4EyLe9EmtJsskxv1 =Skr9 -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 9:31:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ogurok.com (ogurok.com [209.208.150.188]) by hub.freebsd.org (Postfix) with ESMTP id DACDD14F52 for ; Sun, 3 Oct 1999 09:31:06 -0700 (PDT) (envelope-from oleg@ogurok.com) Received: from localhost (oleg@localhost) by ogurok.com (8.9.3/8.9.3) with ESMTP id MAA12844; Sun, 3 Oct 1999 12:34:03 -0400 (EDT) (envelope-from oleg@ogurok.com) Date: Sun, 3 Oct 1999 12:34:02 -0400 (EDT) From: Oleg Ogurok To: Ilia Chipitsine Cc: Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > > I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will > > > have nearly all the drivers configurable to run as modules or compiled > > ^^^^^^^^^^^^^^^^^^^^^^ > > it smells like it will be able to run on 4Mb of RAM. > is that correct ? > I am not sure about this, but it will definetely smell (stink) on 4mb ;) People, RAM doesn't cost big $$$ anymore ;-) -Oleg. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 9:40:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fingers.shocking.com (shocking.com [216.111.111.11]) by hub.freebsd.org (Postfix) with ESMTP id 4728914BE3 for ; Sun, 3 Oct 1999 09:40:40 -0700 (PDT) (envelope-from doemill@shocking.com) Received: from localhost (doemill@localhost) by fingers.shocking.com (8.9.0/8.9.0) with ESMTP id JAA11150; Sun, 3 Oct 1999 09:37:33 -0700 (PDT) Date: Sun, 3 Oct 1999 09:37:32 -0700 (PDT) From: Doug To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: non-gnome/KDE icq for FreeBSD ? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I like licq better. its a package, I beleive. On Sun, 3 Oct 1999, J McKitrick wrote: > Any thoughts on which is better? And do i have to get it through the > ports collection at the main site? > > jcm > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 9:46:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 70A3314EA3 for ; Sun, 3 Oct 1999 09:46:27 -0700 (PDT) (envelope-from marc@oldserver.demon.nl) Received: from [212.238.105.241] (helo=mistress) by post.mail.nl.demon.net with esmtp (Exim 2.12 #1) id 11Xonb-0009mO-00; Sun, 3 Oct 1999 16:47:48 +0000 Date: Sun, 3 Oct 1999 18:46:26 +0200 (CEST) From: Marc Schneiders To: Oleg Ogurok Cc: Ilia Chipitsine , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@freebsd.org Subject: Re: FreeBSD 4.0 release In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Oleg Ogurok wrote: > > > > > > I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will > > > > have nearly all the drivers configurable to run as modules or compiled > > > > ^^^^^^^^^^^^^^^^^^^^^^ > > > > it smells like it will be able to run on 4Mb of RAM. > > is that correct ? > > > I am not sure about this, but it will definetely smell (stink) on 4mb ;) > People, RAM doesn't cost big $$$ anymore ;-) > > -Oleg. > Thought prices were up again quite a lot. Here in any case. Anyway, there are 386 PC's which simply can't store more RAM or which have 4 * 1 MB and would need 4 * 4 MB, costing $ 50 (in my country). It would be nice if these old PC's were usable, esp. for people to try FreeBSD. You cannot, of course, sacrifice anything useful for that reason. It would be nice though, if possible. Marc -- Marc Schneiders marc@venster.nl marc@oldserver.demon.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 9:51: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from harpo.dhis.org (pm3-01-13.eug.du.teleport.com [216.26.32.77]) by hub.freebsd.org (Postfix) with ESMTP id F286014F6C for ; Sun, 3 Oct 1999 09:50:52 -0700 (PDT) (envelope-from dirkm@buster.dhis.org) Received: from localhost (dirkm@localhost) by harpo.dhis.org (8.9.3/8.9.2) with ESMTP id JAA07477; Sun, 3 Oct 1999 09:49:26 -0700 (PDT) (envelope-from dirkm@buster.dhis.org) Date: Sun, 3 Oct 1999 09:49:26 -0700 (PDT) From: Dirk Myers X-Sender: dirkm@harpo.dhis.org To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: freebsd's life expectancy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, J McKitrick wrote: > I don't really want to start a flame war, but... > I just installed freebsd and i LOVE it. SHould i be concerned that > freeBSD will die out someday, since it is not really a commerical > enterprise, but is supported by volunteers? You should always be concerned about this. However, my personal experience is that it's far more likely for a commercial vendor to drop a program than it is for a volunteer project with a healthy user base to be discontinued. My feeling is that a volunteer project is *more* likely to survive. Dirk dirkm@buster.dhis.org ----------------------------- Letting Microsoft control your operating system is like letting ValuJet run air traffic control. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 9:52:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id D97DD154AC for ; Sun, 3 Oct 1999 09:52:28 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA02759; Sun, 3 Oct 1999 10:10:48 -0700 (PDT) Date: Sun, 3 Oct 1999 10:10:47 -0700 (PDT) From: Alfred Perlstein To: David Gilbert Cc: freebsd-questions@FreeBSD.ORG Subject: Re: runaway apache processes? In-Reply-To: <14327.6267.899595.923700@trooper.velocet.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, David Gilbert wrote: > I've been having real problems with runaway apache processes with more > recent versions of FreeBSD. Apache is configured (by hand) with ssl, > php, httpdapy (a python module) and a few others. > > When this happens, some (sometimes many) httpd processes chew up 100% > CPU and need a kill -9 to die. > > Has anyone else be having this problem? I'm not a php nor python programmer, however I've seen this happen when there is an accidental infinite loop in a php script, perhaps the php or python engines have a way of aborting a script after X amount of time has gone by? -Alfred > > Dave. > > -- > ============================================================================ > |David Gilbert, Velocet Communications. | Two things can only be | > |Mail: dgilbert@velocet.net | equal if and only if they | > |http://www.velocet.net/~dgilbert | are precisely opposite. | > =========================================================GLO================ > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 9:57:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 5518514F52 for ; Sun, 3 Oct 1999 09:57:10 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA02780; Sun, 3 Oct 1999 10:14:15 -0700 (PDT) Date: Sun, 3 Oct 1999 10:14:15 -0700 (PDT) From: Alfred Perlstein To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: freebsd's life expectancy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, J McKitrick wrote: > I don't really want to start a flame war, but... > I just installed freebsd and i LOVE it. SHould i be concerned that > freeBSD will die out someday, since it is not really a commerical > enterprise, but is supported by volunteers? Considering that: 1) it has considerable commercial backing. (*) 2) tripled userbase in the last year 3) been around since '92/'93 no, i think FreeBSD will be around for a long time. -Alfred (*) many of the 'volunteers' are from companies that use FreeBSD in thier own products, these companies would like FreeBSD to stick around. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:24:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from trooper.velocet.net (trooper.velocet.net [216.126.82.226]) by hub.freebsd.org (Postfix) with ESMTP id 228F514CEA for ; Sun, 3 Oct 1999 10:24:23 -0700 (PDT) (envelope-from dgilbert@trooper.velocet.net) Received: (from dgilbert@localhost) by trooper.velocet.net (8.9.3/8.9.3) id NAA41713; Sun, 3 Oct 1999 13:24:16 -0400 (EDT) (envelope-from dgilbert) From: David Gilbert MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14327.37184.259874.807747@trooper.velocet.net> Date: Sun, 3 Oct 1999 13:24:16 -0400 (EDT) To: Alfred Perlstein Cc: David Gilbert , freebsd-questions@FreeBSD.ORG Subject: Re: runaway apache processes? In-Reply-To: References: <14327.6267.899595.923700@trooper.velocet.net> X-Mailer: VM 6.71 under 20.4 "Emerald" XEmacs Lucid Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >>>>> "Alfred" == Alfred Perlstein writes: Alfred> On Sun, 3 Oct 1999, David Gilbert wrote: >> I've been having real problems with runaway apache processes with >> more recent versions of FreeBSD. Apache is configured (by hand) >> with ssl, php, httpdapy (a python module) and a few others. >> >> When this happens, some (sometimes many) httpd processes chew up >> 100% CPU and need a kill -9 to die. >> >> Has anyone else be having this problem? Alfred> I'm not a php nor python programmer, however I've seen this Alfred> happen when there is an accidental infinite loop in a php Alfred> script, perhaps the php or python engines have a way of Alfred> aborting a script after X amount of time has gone by? But we've verified that this will happen even when the server is serving a non-php page or a graphic. It appears (after much pulling of hair) to be due to the pthreads required by the python module --- that compiling apache with pthreads makes it very wonky indeed. Dave. -- ============================================================================ |David Gilbert, Velocet Communications. | Two things can only be | |Mail: dgilbert@velocet.net | equal if and only if they | |http://www.velocet.net/~dgilbert | are precisely opposite. | =========================================================GLO================ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:25:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta4.rcsntx.swbell.net (mta4.rcsntx.swbell.net [151.164.30.28]) by hub.freebsd.org (Postfix) with ESMTP id A24EB14CEA for ; Sun, 3 Oct 1999 10:25:24 -0700 (PDT) (envelope-from chris@tourneyland.com) Received: from abc ([216.62.177.1]) by mta4.rcsntx.swbell.net (Sun Internet Mail Server sims.3.5.1999.09.16.21.57.p8) with SMTP id <0FJ100A32F2AI9@mta4.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Sun, 3 Oct 1999 12:25:23 -0500 (CDT) Date: Sun, 03 Oct 1999 12:24:29 -0500 From: chris@tourneyland.com Subject: 3.3-Release - problem with PATH? X-Sender: pop992333@mail.9netave.net To: freebsd-questions@freebsd.org Message-id: <3.0.6.32.19991003122429.008dea80@mail.9netave.net> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Content-type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I just upgraded from 3.2 Release to 3.3 Release. No problems, except it seems that now my PATH variable is being ignored. My PATH is just fine, except trying to execute anything on the path (e.g. bash) gives me 'command not found'. Using the full path name works fine. Does this ring a bell with anyone? Thanks, Chris (P.S. I'm not sure if it's relevant, but I did a reinstall instead of an upgrade. Just thought I'd mention all possible data.) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:32:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id A5DC614CEA for ; Sun, 3 Oct 1999 10:32:25 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id KAA23850; Sun, 3 Oct 1999 10:32:14 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F7931E.4A4C9F17@gorean.org> Date: Sun, 03 Oct 1999 10:32:14 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: Barry Irwin Cc: "Dr. Brain" , freebsd-questions@FreeBSD.ORG Subject: Re: Merging mail from two souces References: <19991002135147.A83943@toxic.magnesium.net> <19991003075357.D47240@rucus.ru.ac.za> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Barry Irwin wrote: > > On Sat 1999-10-02 (13:51), Dr. Brain wrote: > > I want to merge mail from two different sources, one is downloaded through > > fetmail via an IMAP server, and the other is an ftp download from a remote > > FreeBSD machine. Is there any way I can merge these two together? As I > > understand it, fetchmail grabs my mail and dumps it into /var/mail/hodeleri. > > If I wanted to ftp down the other mail, I would put it in /var/mail/hodeleri > > this seems to be a bit of a problem though. RTFM is appreciated, just point > > me to the right place. > > Not too sure about the fetchmail details, but as far as I am aware it uses > your local MTA to deliver the mail it retrieves. For your FTP'd Mailbox, aa > solution would be to use formail. This can then split your ftp'd mailbox up > into its constituant messages and pass them onto the appropriate MTA , which > will then deliver them Fetchmail can also be configured to use an mda of your choice, like procmail. That makes it very handy to merge mail from different sources. I consolidate mail from several different accounts automatically with a combo of fetchmail, procmail and a couple of scripts to handle extreme cases. In your .fetchmailrc file do something like this: defaults proto pop3 fetchall mda "/usr/local/bin/procmail -f-" and you'll be home free. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:35:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from arnold.neland.dk (mail.neland.dk [194.255.12.232]) by hub.freebsd.org (Postfix) with ESMTP id CA1A114CEA; Sun, 3 Oct 1999 10:35:06 -0700 (PDT) (envelope-from leifn@neland.dk) Received: from localhost (localhost [127.0.0.1]) by arnold.neland.dk (8.9.3/8.9.3) with ESMTP id TAA56514; Sun, 3 Oct 1999 19:34:50 +0200 (CEST) (envelope-from leifn@neland.dk) Date: Sun, 3 Oct 1999 19:34:48 +0200 (CEST) From: Leif Neland To: Barry Irwin Cc: Matthias Buelow , hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Fetch/wget/ftp: How to do a recursive ftp-get? In-Reply-To: <19991003074934.C47240@rucus.ru.ac.za> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > BTW.. although risking to be off-topic by miles, I always liked the way > > how NetBSD's ftp(1) (since 1.4 or so) implemented http and ftp URL > > fetching and thus eliminated the need for a fetch(1) command. > > Couldn't the FreeBSD ftp(1) be enhanced that way, [ObTopic, slime slime] > > to use fetch(3) for that purpose? > > This is where a useful tool like wget comes into play. Wget can be pretty > much used as an automated replacement for fetch, or FTP URL retrieval. Can > also be plugged into the whole ports system so that it can retrieve the > ports data packages. > But which tool can do a command-line, recursive ftp-get? wget can't, because it does not create subdirs below the one specified, i.e. if I do a wget -r ftp://webmaster:password@webserver.my.dom/htdocs/tree, it will create the dir webserver.my.dom/htdocs/tree, but not any subdomains to that. Leif To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:44:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.netcologne.de (mail2.netcologne.de [194.8.194.103]) by hub.freebsd.org (Postfix) with ESMTP id B4B2E14CEA for ; Sun, 3 Oct 1999 10:44:42 -0700 (PDT) (envelope-from dr@domix.de) Received: from lamest.domix.de (dial-ra-nc4-10.netcologne.de [195.14.254.10]) by mail2.netcologne.de (8.9.3/8.9.3) with ESMTP id TAA01883; Sun, 3 Oct 1999 19:44:38 +0200 (MET DST) Received: from domix.de (speed.localnet.lan [192.168.1.2]) by lamest.domix.de (8.9.3/8.9.3) with ESMTP id TAA00829; Sun, 3 Oct 1999 19:35:58 +0200 (CEST) (envelope-from dr@domix.de) Received: (from dr@localhost) by domix.de (8.9.3/8.9.3) id TAA53710; Sun, 3 Oct 1999 19:43:03 +0200 (CEST) (envelope-from dr) Date: Sun, 3 Oct 1999 19:43:03 +0200 From: Dominik Rothert To: chris@tourneyland.com Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-Release - problem with PATH? Message-ID: <19991003194303.A53639@speed.localnet.lan> References: <3.0.6.32.19991003122429.008dea80@mail.9netave.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <3.0.6.32.19991003122429.008dea80@mail.9netave.net> X-Encryption: PGP/GnuPG key available X-URL: http://www.domix.de X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG chris@tourneyland.com wrote: > seems that now my PATH variable is being ignored. My PATH is just fine, > except trying to execute anything on the path (e.g. bash) gives me 'command > not found'. Using the full path name works fine. 1. Where do you define your $PATH variable? 2. What says 'echo $PATH'? Best wishes, Dominik Rothert. -- /* Dominik Rothert | Cologne BSD-Usergroup | Dr. LANG Internet Consulting * * dr@domix.de | dr@cbug.de | dr@lang-consulting.de * * www.domix.de | www.cbug.de | www.lang-consulting.de */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:48:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 0B15A14CEA for ; Sun, 3 Oct 1999 10:48:10 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id KAA23917; Sun, 3 Oct 1999 10:48:08 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F796D8.6E09AE19@gorean.org> Date: Sun, 03 Oct 1999 10:48:08 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: mick3@attglobal.net Cc: freebsd-questions@freebsd.org Subject: Re: LI Boot failure References: <37F6577B.778EDBA1@attglobal.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG John Michelini wrote: > > Every once in a while, I will power my computer on and the bootstrap > doesn't load; instead I get the two characters "LI" at the top of the > screen with a blinking cursor next to it, and cannot boot the system. I > must re-install FreeBSD in order to get around this problem. That's a linux LILO problem. If you don't still have linux on your system you need to find out how to get rid of LILO once and for all. I assume that the linux lists would have some help for you. You might also try searching our mail archives since someone else has probably come across this problem. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:49:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from squeaky.noc.gate.net (squeaky.noc.gate.net [199.227.124.91]) by hub.freebsd.org (Postfix) with ESMTP id B151814CEA for ; Sun, 3 Oct 1999 10:49:43 -0700 (PDT) (envelope-from jasonv@gate.net) Received: from localhost (jasonv@localhost) by squeaky.noc.gate.net (8.9.3/8.9.3) with ESMTP id NAA01603 for ; Sun, 3 Oct 1999 13:49:45 -0400 (EDT) (envelope-from jasonv@gate.net) X-Authentication-Warning: squeaky.noc.gate.net: jasonv owned process doing -bs Date: Sun, 3 Oct 1999 13:49:45 -0400 (EDT) From: Jason X-Sender: jasonv@squeaky.noc.gate.net To: freebsd-questions@freebsd.org Subject: Real Player Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have been trying to get real player 5.0 to work on my system. I have the linux emulator running and I can get it started, but whenever I try to open any real content (specificaly welcome.rm that comes with it, I get the messages, 'The codec for this video was not found on your system, please upgrade' and 'RealAudio Decoder was not initalized before attempting to use it.' I am running 3.3-RELEASE Squeaky To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:53: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from www.crb-web.com (ns1.crb-web.com [209.70.120.131]) by hub.freebsd.org (Postfix) with SMTP id B384614CA3 for ; Sun, 3 Oct 1999 10:52:57 -0700 (PDT) (envelope-from wayne@crb.crb-web.com) Received: (qmail 5213 invoked by uid 1001); 3 Oct 1999 18:04:35 -0000 Date: Sun, 3 Oct 1999 14:04:35 -0400 (EDT) From: Wayne Cuddy Reply-To: wayne@crb-web.com Cc: FreeBSD Questions Subject: RE: Huming Bird Exceed with FreeBSD? In-Reply-To: <6C37EE640B78D2118D2F00A0C90FCB4401105CC5@site2s1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG SSH should work fine with exceed just as it does with a regular xserver. However you should not set the DISPLAY env. This will make x clients attempt to use the regular X port connections when it really should use the already established ssh connection. This question is not about exceed it is about Datafellows SSH capabilities. I assume this would appear in the documentation on that product.. Wayne On Sun, 3 Oct 1999, Christopher Michaels wrote: > Date: Sun, 3 Oct 1999 01:31:37 -0400 > From: Christopher Michaels > To: 'Khetan Gajjar' > Cc: Sabre , freebsd-questions@FreeBSD.ORG > Subject: RE: Huming Bird Exceed with FreeBSD? > > You can run a WM with Exceed the way I described. You just have to specify > that in the exceed config. As for using SSH forwarding, I dunno if Exceed > would work with that, interesting question tho. > > -Chris > > > -----Original Message----- > > From: Khetan Gajjar [SMTP:khetan@link.freebsd.os.org.za] > > Sent: Thursday, September 30, 1999 7:16 PM > > To: Christopher Michaels > > Cc: Sabre; freebsd-questions@FreeBSD.ORG > > Subject: RE: Huming Bird Exceed with FreeBSD? > > > > On Thu, 30 Sep 1999, Christopher Michaels wrote: > > > > >Why does he need to go through all these contortions? Why can't he just > > >use: > > >setenv DISPLAY win98_box:0.0 > > > > Hmm, of course. Sorry, I assumed Sabre wanted to actually > > "login" to the box and run a wm, etc, not just run applications. > > It's the only use I have for Exceed - it makes a relatively decent > > X-Terminal. > > > > My apologies. > > > > >That's what I do, and just run the X apps I want to run. Of course this > > is > > >on an internal lan where security isn't an issue. > > > > I'm curious; could you use the Datafellows SSH Windows client and > > use X11-forwarding to secure the connection ? > > --- > > Khetan Gajjar (!kg1779) * khetan@iafrica.com ; khetan@os.org.za > > http://www.os.org.za/~khetan * Talk/Finger khetan@chain.freebsd.os.org.za > > FreeBSD enthusiast * http://www2.za.freebsd.org/ > > Stupidest quote heard : Who is this BSD, and why should we free him ? > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 10:54:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id D688A14A13 for ; Sun, 3 Oct 1999 10:54:20 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id KAA23977; Sun, 3 Oct 1999 10:54:17 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F79849.506ED672@gorean.org> Date: Sun, 03 Oct 1999 10:54:17 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: wwoods@cybcon.com Cc: questions@freebsd.org Subject: Re: Weird NFS problems... References: <99100216042501.00367@freebsd.cybcon.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG william woods wrote: > > Are there some specific issues with rpc.lockd and rpc.statd ?? In all likelihood you don't need lockd. It doesn't work anyway, and generally only causes problems. Take a look at that mail archives for more details. > I am trying to : > > --------- ---------- > | system 1 | | system #2 | > | /usr/src |----NFS Mount---->> | /usr/src | > | /usr/obj | | /usr/obj | > --------- - --------- Sorry, I have no idea what this means. > mount /usr/src and /usr/obj from system #1 on /usr/src and /usr/obj on system > #2 via NFS so I can do a make world for system#2.. > > Here is a copy of my /etc/ecports > > ------------ > /usr/local/src /usr/local/obj -mapall=0: freebsd.cybcon.com > ------------ Are both /usr/local/src and /usr/local/obj real mount points? Look in /etc/fstab, do you see them listed? It would be more common to have /usr as a mount point, unless you customized your system. If /usr is the real mount point just do: /usr -alldirs -maproot=0 freebsd.cybcon.com Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11: 2:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from majordomo2.umd.edu (majordomo2.umd.edu [128.8.10.7]) by hub.freebsd.org (Postfix) with ESMTP id D6E1814DC7 for ; Sun, 3 Oct 1999 11:02:11 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac9.wam.umd.edu (root@rac9.wam.umd.edu [128.8.10.149]) by majordomo2.umd.edu (8.9.3/8.9.3) with ESMTP id OAA26830; Sun, 3 Oct 1999 14:01:53 -0400 (EDT) Received: from rac9.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac9.wam.umd.edu (8.9.3/8.9.3) with SMTP id OAA17705; Sun, 3 Oct 1999 14:01:56 -0400 (EDT) Received: from localhost (culverk@localhost) by rac9.wam.umd.edu (8.9.3/8.9.3) with ESMTP id OAA17701; Sun, 3 Oct 1999 14:01:56 -0400 (EDT) X-Authentication-Warning: rac9.wam.umd.edu: culverk owned process doing -bs Date: Sun, 3 Oct 1999 14:01:56 -0400 (EDT) From: Kenneth Wayne Culver To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: freebsd's life expectancy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In my own humble opinion, that's what will keep freebsd going longer than the others, volunteers do what they do because they want to, not because they are getting paid. Am I right? ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Sun, 3 Oct 1999, J McKitrick wrote: > I don't really want to start a flame war, but... > I just installed freebsd and i LOVE it. SHould i be concerned that > freeBSD will die out someday, since it is not really a commerical > enterprise, but is supported by volunteers? > > jcm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11: 5:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 13F2914DC7 for ; Sun, 3 Oct 1999 11:05:10 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id LAA04277; Sun, 3 Oct 1999 11:23:34 -0700 (PDT) Date: Sun, 3 Oct 1999 11:23:34 -0700 (PDT) From: Alfred Perlstein To: David Gilbert Cc: freebsd-questions@FreeBSD.ORG Subject: Re: runaway apache processes? In-Reply-To: <14327.37184.259874.807747@trooper.velocet.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, David Gilbert wrote: > >>>>> "Alfred" == Alfred Perlstein writes: > > Alfred> On Sun, 3 Oct 1999, David Gilbert wrote: > > >> I've been having real problems with runaway apache processes with > >> more recent versions of FreeBSD. Apache is configured (by hand) > >> with ssl, php, httpdapy (a python module) and a few others. > >> > >> When this happens, some (sometimes many) httpd processes chew up > >> 100% CPU and need a kill -9 to die. > >> > >> Has anyone else be having this problem? > > Alfred> I'm not a php nor python programmer, however I've seen this > Alfred> happen when there is an accidental infinite loop in a php > Alfred> script, perhaps the php or python engines have a way of > Alfred> aborting a script after X amount of time has gone by? > > But we've verified that this will happen even when the server is > serving a non-php page or a graphic. It appears (after much pulling > of hair) to be due to the pthreads required by the python module --- > that compiling apache with pthreads makes it very wonky indeed. Then what you need to do is compile apache with debug 'cc -g' and force it to dump core with 'gcore' and give us a traceback with gdb. -Alfred Perlstein - [bright@rush.net|alfred@freebsd.org] Wintelcom systems administrator and programmer - http://www.wintelcom.net/ [bright@wintelcom.net] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11: 5:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from barrow.uwaterloo.ca (barrow.uwaterloo.ca [129.97.140.32]) by hub.freebsd.org (Postfix) with ESMTP id 2F46815311 for ; Sun, 3 Oct 1999 11:05:18 -0700 (PDT) (envelope-from acheng@barrow.uwaterloo.ca) Received: from localhost (acheng@localhost) by barrow.uwaterloo.ca (8.8.8/8.8.8) with SMTP id OAA10582 for ; Sun, 3 Oct 1999 14:05:17 -0400 (EDT) Date: Sun, 3 Oct 1999 14:05:17 -0400 (EDT) From: Ada To: freebsd-questions@FreeBSD.ORG Subject: Problem installing ssh (1 out of 1 hunks ignored) on 3.3 release Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi All, I was previously running 2.6-release. Just got 3.3 install, but arrive at problem when I try to install ssh through the port collection. (all my ports were downloaded from the 3.3 release disc) I did a make at /usr/ports/security/ssh and it fetches all the required file. But I arrive at the following error: Applying FreeBSD patches for ssh-1.2.27 Ignoring previously applied (or reversed) patch. 1 out of 1 hunks ignored--saving rejects to config.h.in.rej Any help will be greatly appreciated. Many thanks in advance. Ada To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11:11:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 6637514DC7 for ; Sun, 3 Oct 1999 11:11:33 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id LAA23988; Sun, 3 Oct 1999 11:11:30 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F79C52.552F89D9@gorean.org> Date: Sun, 03 Oct 1999 11:11:30 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: Zhihui Zhang Cc: freebsd-questions@freebsd.org Subject: Re: Install FreeBSD from another machine References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Zhihui Zhang wrote: > > I have a machine running FreeBSD 3.3-Release. Is it possible to configure > that machine so that I can install future machines from that machine? > Please give me some directions on how to do so. There is voluminous discussion about this in the Handbook, FAQ and tutorials. Your best bet on questions like this is to read the documentation then if you still have questions to post them to the list, referring specifically to the parts of the documentation you didn't understand. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11:21: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id BBE9314DC7 for ; Sun, 3 Oct 1999 11:21:06 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id LAA23997; Sun, 3 Oct 1999 11:15:59 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F79D5F.1E17D5FC@gorean.org> Date: Sun, 03 Oct 1999 11:15:59 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: Richard Morte Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: NSLINT and DNS configuration References: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Richard Morte wrote: > Are these "errors" due to nslint's inability to find it's way through > the config files ( I shouldn't trust nslint's output) or has it found > something I should investigate further (nslint is good and I've clearly > got it wrong)? It's extremely unlikely that nslint is wrong. However it is impossible to diagnose further without seeing the zone file. If you're serious about setting up DNS you should buy and read "DNS and BIND, Third Edition" from O'Reilly. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11:33:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zeus.dnt.md (zeus.dnt.md [195.138.124.37]) by hub.freebsd.org (Postfix) with ESMTP id 8B3E414D91 for ; Sun, 3 Oct 1999 11:33:14 -0700 (PDT) (envelope-from sl@zeus.dnt.md) Received: from localhost (sl@localhost) by zeus.dnt.md (8.9.3/8.9.3) with ESMTP id VAA60606 for ; Sun, 3 Oct 1999 21:33:12 +0300 (EEST) Date: Sun, 3 Oct 1999 21:33:12 +0300 (EEST) From: slava revutchi To: freebsd-questions@freebsd.org Subject: two device drivers with the same name (al0) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I noticed in 3.3R GENERIC kernel a new divice supported: device al0 # ADMtek AL981 (``Comet'') The thing is, I've been using an Aironet wireless isa card with previous versions of FreeBSD and the driver I had, used the same name: al0. In 3.2 for instance, to add support for the card I would add a line like this: i386/isa/if_al.c optional al device-driver to /sys/i386/conf/files.i386, copy a few files around into the /sys/i386/isa/ and add the appropriate line in the kernel config file. What would I have to do in 3.3R to make it use the wireless card as al0 driver and not the newly introduced one? thank you, slava To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11:34:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from totally.morphed.com (totally.morphed.com [207.66.106.134]) by hub.freebsd.org (Postfix) with ESMTP id 901E415055 for ; Sun, 3 Oct 1999 11:34:47 -0700 (PDT) (envelope-from root@totally.morphed.com) Received: by totally.morphed.com (Postfix, from userid 0) id 97934F41A; Sun, 3 Oct 1999 12:34:37 -0600 (MDT) Received: from localhost (localhost [127.0.0.1]) by totally.morphed.com (Postfix) with ESMTP id 83140B732; Sun, 3 Oct 1999 12:34:37 -0600 (MDT) Date: Sun, 3 Oct 1999 12:34:37 -0600 (MDT) From: "Jason L. Schwab" To: freebsd-questions@freebsd.org Cc: petef@totally.morphed.com, skalir@totally.morphed.com Subject: really weird syslog message...help!! Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG People, I have 207.66.106.134 thro 207.66.106.198 bounded to my system. And I dont have any other ips within that C Class (207.66.106.*) But, in my /var/log/message I am getting flooded with this: any ideas? ...... cut ...... Oct 3 12:12:27 totally /kernel: arplookup 207.66.106.1 failed: host is not on local network Oct 3 12:13:12 totally last message repeated 3 times Oct 3 12:15:16 totally last message repeated 56 times Oct 3 12:25:17 totally last message repeated 274 times ...... cut ....... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11:49: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sasknow.com (h139-142-245-96.ss.FiberONE.NET [139.142.245.96]) by hub.freebsd.org (Postfix) with ESMTP id DB08514A00 for ; Sun, 3 Oct 1999 11:49:02 -0700 (PDT) (envelope-from freebsd@sasknow.com) Received: from localhost (freebsd@localhost) by sasknow.com (8.9.3/8.9.3) with ESMTP id MAA30440 for ; Sun, 3 Oct 1999 12:49:48 -0600 (CST) (envelope-from freebsd@sasknow.com) Date: Sun, 3 Oct 1999 12:49:48 -0600 (CST) From: Ryan Thompson To: freebsd-questions@freebsd.org Subject: ~/bin, ~/etc for chroot'd users Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi everybody; I'm just wondering what the best practice is for the content in the bin/ and etc/ directories in home directories of users for which chroot is run. (Both through ftpd, and just regular login shells). Users come and go on my system with some frequency, and I have a fair number of them. What is the best way to maintain the content in the etc/ directories of users for which chroot is run? (In particular, the pwd.db and groups files, as well as *motd (which change from time to time)). Is there a standardized script that I can use with pwd_mkdb to auto install these files into all users' home directories? Or, am I on my own to hack something together to suit my tastes? Thanks for any input! - Ryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 11:55:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gate.bull.se (bull.se [193.44.17.2]) by hub.freebsd.org (Postfix) with ESMTP id F381614DE6 for ; Sun, 3 Oct 1999 11:55:40 -0700 (PDT) (envelope-from mar@bull.se) Received: from bull.se (eq08.bull.se [129.181.241.108]) by gate.bull.se (8.9.3/8.9.3) with ESMTP id UAA06076; Sun, 3 Oct 1999 20:58:39 +0200 Received: from pcmarhem (kloker.bull.se [129.181.241.95]) by bull.se (AIX4.3/UCB 8.8.8/8.8.8) with SMTP id UAA13768; Sun, 3 Oct 1999 20:58:17 +0200 Reply-To: From: "mark rowlands" To: Cc: "'Eric MASSON'" Subject: RE: pcmcia network card problems 3com and Xircom fail to initialize Date: Sun, 3 Oct 1999 20:55:26 +0200 Message-ID: <000101bf0dd0$db2d4900$5ff1b581@pcmarhem> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 In-Reply-To: <37F7451F.EE06DA1E@kisoft-services.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG merci Eric, i guessed that the si03 was to do with the modem bit so I didn't worry about that, I decided to go back to basics and forget the xircom for now. So : - took the unchanged PCCARD config file - changed pccard.conf to "config 0x1 "ep0" 9 (cards irq) ran /stand/sysinstall enabled pccard so rc.conf now reads pccard_enable="YES" pccard_ifconfig="ep0" pccard_mem="0x1020" ifconfig_ep0="inet 129.181.241.90 netmask 255.255.255.0" defaultrouter="129.181.241.212" network_interfaces="ep0 auto" on reboot ifconfig -a shows ep0 as unconfigured. manually running ifconfig ep0 inet 129.181.241.90 netmask 255.255.255.0 seems to help. running /etc/pccard_ether produces an intriguing response of "shift: can't shift that many" and prints the ifconfig stuff and follows that with add net default 129.181.241.212 (my gateway!) On removing and reinserting the card slot 0 unfielded interrupt (0) is issued followed by the mac address ifconfig -a goes back to it's pristine unconfigured state. another error message received at boot is that syslogd dies due bind being unable to assign requested address, there is also a message about ioctrl getting a faulty parameter but if flies off the screen to fast to see it. is there a way of recording those messages somewhere, they are not it dmesg or /var/log/messages? I feel no closer to understanding what is going on but thats my problem, but persistence can occasionally substitute for intelligence. I really would like to get this working properly though I am starting to think Freebsd on a laptop is just not meant to be, for me at any rate, bad news is that, that is exactly where I need it :-(. -----Original Message----- From: owner-freebsd-questions@FreeBSD.ORG [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Eric MASSON Sent: den 3 oktober 1999 13:59 To: maar@bull.se Cc: FreeBSD-questions (E-mail) Subject: Re: pcmcia network card problems 3com and Xircom fail to initialize Hi, mark rowlands a écrit : > > 3.3 Release with 3com 3c589c add ep0 to your kernel config file << device ep0 at isa? port? net irq? >> (maybe the syntax is not quite exact, take the standard line and remove all values on options), the fact is that you must have the driver in kernel. > Xircom CEM56 10/100 + 56 modem. This card seems to use sio3 but sio3 is disabled in your kernel config file. Hope it helps Regards Eric MASSON -- Any opinions expressed above | Murphy's Law Corollary : are my own, not Kisoft's | Murphy was an optimist. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 12:10:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cs.tamu.edu (clavin.cs.tamu.edu [128.194.130.106]) by hub.freebsd.org (Postfix) with ESMTP id 6446F14DE6 for ; Sun, 3 Oct 1999 12:10:19 -0700 (PDT) (envelope-from sks1974@cs.tamu.edu) Received: from dilbert.cs.tamu.edu (IDENT:2708@dilbert [128.194.133.100]) by cs.tamu.edu (8.9.3/8.9.3) with ESMTP id OAA06126 for ; Sun, 3 Oct 1999 14:09:59 -0500 (CDT) Received: from localhost by dilbert.cs.tamu.edu (8.9.3/8.9.3) with SMTP id OAA16804 for ; Sun, 3 Oct 1999 14:09:56 -0500 (CDT) X-Authentication-Warning: dilbert.cs.tamu.edu: sks1974 owned process doing -bs Date: Sun, 3 Oct 1999 14:09:56 -0500 (CDT) From: Suresh Kumar Satapati X-Sender: sks1974@dilbert To: freebsd-questions@freebsd.org Subject: FreeBSD 3.3 - Installation problem Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hai I am trying to install 3.3 release on a 486 machine with 32MB RAM, 500MB hard disk capacity. Since it doesn't have a CD-ROM drive, I am trying to install using floppies. i have prepared boot floppies viz. kern.flp and mfsroot.flp. I have also prepared floppies for installation of distributions. I started with 'bin' distribution. When I am trying to install using floppy, i get the folowing message: --------------------------------------------------------------------- 'Couldnt extract the following distribution. This may be because they were not available on the installation media you've chosen: bin doc manpages proflibs dict info --------------------------------------------------------------------- I formatted my floppy for a UFS using the sequence of commands fdformat, disklabel and newfs, and then i copied bin.aa, bin.ab, bin.ac,....into A:\bin Could you please help me with this problem ? Anticipating a reply at the earliest, I remain. Thanks Suresh (Graduate Student, Texas A&M Univ) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 12:22:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sasknow.com (h139-142-245-96.ss.FiberONE.NET [139.142.245.96]) by hub.freebsd.org (Postfix) with ESMTP id 83D1314D21 for ; Sun, 3 Oct 1999 12:22:48 -0700 (PDT) (envelope-from freebsd@sasknow.com) Received: from localhost (freebsd@localhost) by sasknow.com (8.9.3/8.9.3) with ESMTP id NAA00373 for ; Sun, 3 Oct 1999 13:22:47 -0600 (CST) (envelope-from freebsd@sasknow.com) Date: Sun, 3 Oct 1999 13:22:47 -0600 (CST) From: Ryan Thompson To: freebsd-questions@freebsd.org Subject: Shutdown w/Ctrl-Alt-Del -- OOPS! :-) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hey all; Perhaps this question isn't so dumb... But the actions leading to it are :-) To make a long story short, I got two keyboards confused and used Ctrl-Alt-Del to attempt to log in to an NT machine. Turns out I rebooted my FreeBSD machine :-) Is there a way (perhaps in the kernel, though I didn't see anything in LINT--and I didn't go looking through sources, either. If not in the kernel, where DOES that hook? Boot loader?) to disable the default Ctrl-Alt-Del combination to prevent inadvertant shutdowns? Or, is there some obscure reason I why shouldn't do this? I don't know if this is a -hackers question or not, so I'm posting it here. I'd much rather just be able to manually reboot by issuing a reboot command from within a shell. Thanks - Ryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 12:30: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bingnet2.cc.binghamton.edu (bingnet2.cc.binghamton.edu [128.226.1.18]) by hub.freebsd.org (Postfix) with ESMTP id 47DFE14D21 for ; Sun, 3 Oct 1999 12:30:07 -0700 (PDT) (envelope-from zzhang@cs.binghamton.edu) Received: from sol.cs.binghamton.edu (cs1-gw.cs.binghamton.edu [128.226.171.72]) by bingnet2.cc.binghamton.edu (8.9.3/8.9.3) with SMTP id PAA21186; Sun, 3 Oct 1999 15:30:06 -0400 (EDT) Date: Sun, 3 Oct 1999 15:15:39 -0400 (EDT) From: Zhihui Zhang To: Doug Cc: freebsd-questions@freebsd.org Subject: Re: Install FreeBSD from another machine In-Reply-To: <37F79C52.552F89D9@gorean.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Doug wrote: > Zhihui Zhang wrote: > > > > I have a machine running FreeBSD 3.3-Release. Is it possible to configure > > that machine so that I can install future machines from that machine? > > Please give me some directions on how to do so. > > There is voluminous discussion about this in the Handbook, FAQ and > tutorials. Your best bet on questions like this is to read the > documentation then if you still have questions to post them to the list, > referring specifically to the parts of the documentation you didn't > understand. Thanks. I checked those places again. Now the question is: where are the distribution files and which of them are needed? I guess I can put them on a NFS server or another filesystem on the same machine and install FreeBSD 3.3 from there. I installed FreeBSD from CD-ROM and via FTP sites many times. But installing from a NFS server or another filesystem is not well documented. So please give me a little more information. -Zhihui To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 12:40: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from area51.quadspeed.com (node10345.a2000.nl [24.132.3.69]) by hub.freebsd.org (Postfix) with ESMTP id AE05014DE6 for ; Sun, 3 Oct 1999 12:39:54 -0700 (PDT) (envelope-from michel@quadspeed.com) Received: from x-file (x-file.quadspeed.com [192.168.50.2]) by area51.quadspeed.com (8.9.3/8.9.3) with ESMTP id VAA07230; Sun, 3 Oct 1999 21:39:37 +0200 (CEST) (envelope-from michel@quadspeed.com) Message-Id: <4.2.0.58.19991003214001.00962db0@127.0.0.1> X-Sender: michel/area51.quadspeed.com@127.0.0.1 X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Sun, 03 Oct 1999 21:40:41 +0200 To: Ryan Thompson From: Michel Quadflieg Subject: Re: Shutdown w/Ctrl-Alt-Del -- OOPS! :-) Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Put this in your kernel configuration : options SC_DISABLE_REBOOT # disable reboot key sequence This will fix it for you Greetz Michel At 01:22 PM 10/3/99 -0600, you wrote: >Hey all; > >Perhaps this question isn't so dumb... But the actions leading to it are >:-) To make a long story short, I got two keyboards confused and used >Ctrl-Alt-Del to attempt to log in to an NT machine. Turns out I rebooted >my FreeBSD machine :-) > >Is there a way (perhaps in the kernel, though I didn't see anything in >LINT--and I didn't go looking through sources, either. If not in the >kernel, where DOES that hook? Boot loader?) to disable the default >Ctrl-Alt-Del combination to prevent inadvertant shutdowns? Or, is there >some obscure reason I why shouldn't do this? I don't know if this is a >-hackers question or not, so I'm posting it here. > >I'd much rather just be able to manually reboot by issuing a reboot >command from within a shell. > >Thanks > >- Ryan > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message Greetz Q. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 12:49:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sasknow.com (h139-142-245-96.ss.FiberONE.NET [139.142.245.96]) by hub.freebsd.org (Postfix) with ESMTP id A627014F3F for ; Sun, 3 Oct 1999 12:49:52 -0700 (PDT) (envelope-from freebsd@sasknow.com) Received: from localhost (freebsd@localhost) by sasknow.com (8.9.3/8.9.3) with ESMTP id NAA00305; Sun, 3 Oct 1999 13:49:44 -0600 (CST) (envelope-from freebsd@sasknow.com) Date: Sun, 3 Oct 1999 13:49:44 -0600 (CST) From: Ryan Thompson To: Michel Quadflieg Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Shutdown w/Ctrl-Alt-Del -- OOPS! :-) In-Reply-To: <4.2.0.58.19991003214001.00962db0@127.0.0.1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Michel Quadflieg wrote: > Hi > > Put this in your kernel configuration : > > options SC_DISABLE_REBOOT # disable reboot key sequence > > This will fix it for you > > Greetz > > Michel HA! Maybe I should have looked through LINT a bit better than I did :-) Now that I see it, I even remember that directive. Worked like a charm; thanks, Michel. - Ryan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 12:57:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from revolution.3-cities.com (revolution.3-cities.com [204.203.224.155]) by hub.freebsd.org (Postfix) with ESMTP id 77AB014F5A for ; Sun, 3 Oct 1999 12:56:57 -0700 (PDT) (envelope-from kstewart@3-cities.com) Received: from 3-cities.com (kenn1159.bossig.com [208.26.241.159]) by revolution.3-cities.com (8.9.3/8.9.3) with ESMTP id MAA24734; Sun, 3 Oct 1999 12:55:31 -0700 (PDT) Message-ID: <37F7B4C7.441BE4BC@3-cities.com> Date: Sun, 03 Oct 1999 12:55:51 -0700 From: Kent Stewart Organization: BOSSig X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Alfred Perlstein Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: freebsd's life expectancy References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Alfred Perlstein wrote: > > On Sun, 3 Oct 1999, J McKitrick wrote: > > > I don't really want to start a flame war, but... > > I just installed freebsd and i LOVE it. SHould i be concerned that > > freeBSD will die out someday, since it is not really a commerical > > enterprise, but is supported by volunteers? > > Considering that: > > 1) it has considerable commercial backing. (*) > 2) tripled userbase in the last year > 3) been around since '92/'93 > > no, i think FreeBSD will be around for a long time. People can spend a lot of time on a personal project and feel good. When you purchase something and feel ripped off, $98 USA can be too much. They may spend a man-month on something such as FreeBSD and feel good at spending the time. They don't have access to the commercial sources and get frustrated. They can't solve a problem and the large system vendors require a lot of testing time before they appear to get around_to_it. I use Windows and FreeBSD because I believe that it is easier to match a project to its needs than it is to force a project onto a system where there is no easy way to deal with it. Every system has an area where they do something better than the others do. In that area, they are the lead dog and everyone that has seen a dog sled race knows that the sceenery only changes for the lead dog :). I also think FreeBSD will be around for a long time. Kent > > -Alfred > > (*) many of the 'volunteers' are from companies that use FreeBSD > in thier own products, these companies would like FreeBSD to stick > around. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:20:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id AAADA14EE0 for ; Sun, 3 Oct 1999 13:20:09 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id QAA07330 for freebsd-questions@FreeBSD.ORG; Sun, 3 Oct 1999 16:23:08 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910032023.QAA07330@cc942873-a.ewndsr1.nj.home.com> Subject: Smart UPS Tools Trouble To: freebsd-questions@FreeBSD.ORG (FreeBSD Questions) Date: Sun, 3 Oct 1999 16:23:08 -0400 (EDT) Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have been trying to get my PC to listen to my APC Back-UPS 500. I've looked at upsd and upsmond in the ports, but they are for Smart-UPSes, not Back-UPSes. I have bkpupsd from the ports installed, but it does not seem to work. It runs just fine, but if I pull the plug on the UPS, it does not seem to notice there is a problem (although I clearly hear the UPS's annoying beeps). I looked in the mail archives and someone recommended Smart UPS Tools from www.exploits.org. I grabbed the tarball and have been trying to get this to work. No luck there either. The first thing I found was that the program drops root priviliges before openning the serial port. I added some getuid() statements to help me debug, and this is what I was getting, # /usr/local/ups/bin/backupspro /dev/cuaa0 Smart UPS Tools - Back-UPS Pro driver 1.10 (0.41.4) Unable to open (1) /dev/cuaa0: Permission denied uid: 65534, euid: 65534 This is with /dev/cuaa0 set to the FreeBSD default of, crw-rw---- 1 uucp dialer 28, 128 Oct 1 23:08 /dev/cuaa0 Just to see if things would work, I changed the permissions to 666, but still got stuck with, # /usr/local/ups/bin/backupspro /dev/cuaa0 Smart UPS Tools - Back-UPS Pro driver 1.10 (0.41.4) /dev/cuaa0 is locked by another process But using fstat, I can't find any processes using that device. I believe people have gotten these packages, bkpupsd and Smart UPS Tools, to work with FreeBSD. What might I be overlooking? For reference, the hardware/software I am using is, FreeBSD 2.2.8-STABLE Serial Port: sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A APC Back-UPS 500 APC "Black Wire": 940-0024C -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:20:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from revolution.3-cities.com (revolution.3-cities.com [204.203.224.155]) by hub.freebsd.org (Postfix) with ESMTP id A178014EE0 for ; Sun, 3 Oct 1999 13:20:30 -0700 (PDT) (envelope-from kstewart@3-cities.com) Received: from 3-cities.com (kenn1159.bossig.com [208.26.241.159]) by revolution.3-cities.com (8.9.3/8.9.3) with ESMTP id NAA27304; Sun, 3 Oct 1999 13:19:52 -0700 (PDT) Message-ID: <37F7BA7C.871DE7DF@3-cities.com> Date: Sun, 03 Oct 1999 13:20:12 -0700 From: Kent Stewart Organization: BOSSig X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Oleg Ogurok Cc: Ilia Chipitsine , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Oleg Ogurok wrote: > > > > > I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will > > > > have nearly all the drivers configurable to run as modules or compiled > > > > ^^^^^^^^^^^^^^^^^^^^^^ > > > > it smells like it will be able to run on 4Mb of RAM. > > is that correct ? > > > I am not sure about this, but it will definetely smell (stink) on 4mb ;) > People, RAM doesn't cost big $$$ anymore ;-) I had to laugh at this because I was trying to come up with a polite response and stink is a funny way to describe the poor performance such a system will have. I figure the apparent speed of the ram will be 10 millisecond because my HD's have a 10ms average access time. You haven't priced ram since the Taiwan earthquake. The 128MB I have in a couple of my systems went from $90 US to $324 US. Cheers, Kent > > -Oleg. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:34:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from logisticsoftware.co.nz (logisticsoftware.co.nz [202.37.163.1]) by hub.freebsd.org (Postfix) with ESMTP id DD0C91508F for ; Sun, 3 Oct 1999 13:34:34 -0700 (PDT) (envelope-from jonc@logisticsoftware.co.nz) Received: (from jonc@localhost) by logisticsoftware.co.nz (8.9.3/8.9.3) id JAA15651; Mon, 4 Oct 1999 09:22:37 +1300 (NZDT) Date: Mon, 4 Oct 1999 09:22:37 +1300 (NZDT) From: Jonathan Chen To: Richard Morte Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: Printing FROM FreeBsd to Windows In-Reply-To: <37F74CFD.14F07AD7@sinclairassoc.force9.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Richard Morte wrote: > Has anyone discovered if it is possible to attach a shared printer as a > FreeDSD resource so that you can print to it from within applications? > That is, have the shared (windows) printer appear alongside lp, for > example? In your /etc/printcap, define the printer so that it uses an interface script which invokes smbclient. --------------------------------------------------------------------- Jonathan Chen | Opportunites are seldom labeled --------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:46:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 16DF214CBF for ; Sun, 3 Oct 1999 13:46:38 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id NAA25195; Sun, 3 Oct 1999 13:46:36 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F7C0AC.6DAE27FC@gorean.org> Date: Sun, 03 Oct 1999 13:46:36 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: cjclark@home.com Cc: FreeBSD Questions Subject: Re: Back UPS Tools Trouble References: <199910032023.QAA07330@cc942873-a.ewndsr1.nj.home.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "Crist J. Clark" wrote: > > I have been trying to get my PC to listen to my APC Back-UPS 500. I've > looked at upsd and upsmond in the ports, but they are for Smart-UPSes, > not Back-UPSes. I have bkpupsd from the ports installed, but it does > not seem to work. It runs just fine, but if I pull the plug on the > UPS, it does not seem to notice there is a problem (although I clearly > hear the UPS's annoying beeps). I had the same problem using the cable provided by APC and their windows client. The program does confirm communication with the UPS, but pulling the plug does not register an "event" with the ups monitor. I have a backups (non-pro) 450. At this point I strongly suspect that apc simply put the wrong cable in my box. I've been trying to find an authoritative source for the cable pinouts so I can just build my own, but I haven't yet. As soon as I get a chance I'm going to contact apc about this, but if you beat me to it, or find a program that works please keep me up to date, I'd really like to get this working. Thanks, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:53:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 141D214DEA for ; Sun, 3 Oct 1999 13:53:23 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id PAA27241; Sun, 3 Oct 1999 15:53:20 -0500 (CDT) (envelope-from dan) Date: Sun, 3 Oct 1999 15:53:20 -0500 From: Dan Nelson To: cjclark@home.com Cc: FreeBSD Questions Subject: Re: Smart UPS Tools Trouble Message-ID: <19991003155320.A26952@dan.emsphone.com> References: <199910032023.QAA07330@cc942873-a.ewndsr1.nj.home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <199910032023.QAA07330@cc942873-a.ewndsr1.nj.home.com> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 03), Crist J. Clark said: > I looked in the mail archives and someone recommended Smart UPS Tools > from www.exploits.org. I grabbed the tarball and have been trying to > get this to work. No luck there either. The first thing I found was > that the program drops root priviliges before openning the serial > port. I added some getuid() statements to help me debug, and this is > what I was getting, > > # /usr/local/ups/bin/backupspro /dev/cuaa0 > Smart UPS Tools - Back-UPS Pro driver 1.10 (0.41.4) > Unable to open (1) /dev/cuaa0: Permission denied > uid: 65534, euid: 65534 > > This is with /dev/cuaa0 set to the FreeBSD default of, > > crw-rw---- 1 uucp dialer 28, 128 Oct 1 23:08 /dev/cuaa0 What I do is run ./configure --with-gid=68 . There are still some other porting problems with the program; I've been sending patches to the author but I moved to a new machine that has only one serial port, so I have to unplug my mouse to play with the UPS. The last version I played with was 0.41.4p6. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:53:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from revolution.3-cities.com (revolution.3-cities.com [204.203.224.155]) by hub.freebsd.org (Postfix) with ESMTP id 309B614EE6 for ; Sun, 3 Oct 1999 13:53:29 -0700 (PDT) (envelope-from kstewart@3-cities.com) Received: from 3-cities.com (kenn1159.bossig.com [208.26.241.159]) by revolution.3-cities.com (8.9.3/8.9.3) with ESMTP id NAA00991; Sun, 3 Oct 1999 13:51:48 -0700 (PDT) Message-ID: <37F7C1F8.4A3BDD1F@3-cities.com> Date: Sun, 03 Oct 1999 13:52:08 -0700 From: Kent Stewart Organization: BOSSig X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Marc Schneiders Cc: Oleg Ogurok , Ilia Chipitsine , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Marc Schneiders wrote: > > On Sun, 3 Oct 1999, Oleg Ogurok wrote: > > > > > > > > > > I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will > > > > > have nearly all the drivers configurable to run as modules or compiled > > > > > > ^^^^^^^^^^^^^^^^^^^^^^ > > > > > > it smells like it will be able to run on 4Mb of RAM. > > > is that correct ? > > > > > I am not sure about this, but it will definetely smell (stink) on 4mb ;) > > People, RAM doesn't cost big $$$ anymore ;-) > > > > -Oleg. > > > > Thought prices were up again quite a lot. Here in any case. > > Anyway, there are 386 PC's which simply can't store more RAM or which > have 4 * 1 MB and would need 4 * 4 MB, costing $ 50 (in my country). It > would be nice if these old PC's were usable, esp. for people to try > FreeBSD. You cannot, of course, sacrifice anything useful for that reason. > It would be nice though, if possible. The problem is the response of such a system. They could think FreeBSD is terrible and it is really their lack of RAM. If you advertise such a system, you also have to warn about the possible lack of performance. Kent > > Marc > > -- > Marc Schneiders > > marc@venster.nl > marc@oldserver.demon.nl > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:54:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from swan.prod.itd.earthlink.net (swan.prod.itd.earthlink.net [207.217.120.123]) by hub.freebsd.org (Postfix) with ESMTP id 331AF14E53 for ; Sun, 3 Oct 1999 13:54:17 -0700 (PDT) (envelope-from bradchapman@earthlink.net) Received: from earthlink.net (sdn-ar-005gaatlaP208.dialsprint.net [168.191.255.120]) by swan.prod.itd.earthlink.net (8.9.3/8.9.3) with ESMTP id NAA11631 for ; Sun, 3 Oct 1999 13:54:16 -0700 (PDT) Message-ID: <37F7C2B0.A01DC28A@earthlink.net> Date: Sun, 03 Oct 1999 17:01:30 -0400 From: Brad Chapman Reply-To: bradchapman@earthlink.net X-Mailer: Mozilla 4.5 (Macintosh; I; PPC) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Need Advice on New PC for FreeBSD Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello; I am putting together a new computer from scratch to run FreeBSD and a database (MySQL) backed web server (under Apache). Although I am familiar with the FreeBSD OS and other stuff, I'm a newbie in terms of assembling computers. Does anyone have recommendations for components to build a good system? ie. if you could build your own computer, what would you put on it? Just trying to collect info and I would appreciate any advice anyone could give me. Thanks. Brad Chapman chapmanb@arches.uga.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 13:56:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from server7.singular.com (server7.singular.com [204.140.208.10]) by hub.freebsd.org (Postfix) with ESMTP id 82D4314E06 for ; Sun, 3 Oct 1999 13:56:52 -0700 (PDT) (envelope-from jbarbee@singular.com) Received: from bleeding-edge (w200.z209220201.lax-ca.dsl.cnc.net [209.220.201.200]) by server7.singular.com (8.8.8/8.8.8) with SMTP id NAA12154 for ; Sun, 3 Oct 1999 13:56:52 -0700 (PDT) (envelope-from jbarbee@singular.com) Message-Id: <4.1.19991003135145.00aa0920@server7.singular.com> X-Sender: jbarbee@server7.singular.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Sun, 03 Oct 1999 13:57:31 -0700 To: freebsd-questions@freebsd.org From: John Barbee Subject: how much of RSS is shared? Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG How do I determine the amount of a process' physical memory is shared? I've seen version of top that have a "Shared" column (might have been on a RH installation). But that is not available in top v3.4 of FreeBSD 3.2 on my machine. ps doesn't seem to give me that option either. vmstat deals with pages, so that doesn't seem to appy to me. I don't want to install X or gnome just so I can look at gtop. So, is there an easy way for me to figure this out? Alternatively, would it be a trivial or non-trivial amount of work to write a small program mysef to get the VSZ, RSS and shared memory? tia john. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14: 9:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 7BAF7152A6 for ; Sun, 3 Oct 1999 14:09:35 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id OAA25247; Sun, 3 Oct 1999 14:09:33 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37F7C60D.A24AA494@gorean.org> Date: Sun, 03 Oct 1999 14:09:33 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: "Stephen A. Derdau" Cc: "Questions @ FreeBSD" Subject: Re: netstat ? References: <37F5F531.4F7841D0@ne.mediaone.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "Stephen A. Derdau" wrote: > > I've been working on setting up my system for a little more security. > I've been looking at this link for information. > http://www.bellnetworks.net/cs/showrec.php3?story_id=3 > > doing a netstat -a I see the following > > are these anything to be concerned about in regards to security issues > ?: > that is I don't see refrence to anything regarding icmp It's used for a lot of things related to the soft underbelly of TCP/IP networking. There's lot of books that explain this in more detail, but it is needed and it won't hurt anything. > or *.6011 *.6010. Those are opened up by ssh to do X forwarding. I believe that someone else mentioned the sockstat program. If you're not already using 3.3-Stable you should upgrade asap. That would be a very valuable first step in security, more so depending on how old your current freebsd installation is. > I'm not sure what these are and I'd like to be able to understand it a > little more. > > Proto Recv-Q Send-Q Local Address Foreign Address > (state) > udp 0 0 *.bootpc *.* This is the dhcp client port. Hope this helps, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:12:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mashie.force9.net (mashie.force9.net [195.166.128.30]) by hub.freebsd.org (Postfix) with SMTP id E4A1314EE6 for ; Sun, 3 Oct 1999 14:11:51 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 19690 invoked from network); 3 Oct 1999 21:11:47 -0000 Received: from mayfly.plus.net.uk (HELO mayfly.force9.net) (195.166.128.28) by mashie.force9.net with SMTP; 3 Oct 1999 21:11:47 -0000 Received: (qmail 25629 invoked from network); 3 Oct 1999 21:11:46 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.102.46) by mayfly.plus.net.uk with SMTP; 3 Oct 1999 21:11:46 -0000 Message-ID: <37F7C6A9.A1573EBB@sinclairassoc.force9.co.uk> Date: Sun, 03 Oct 1999 22:12:09 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: Doug Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: NSLINT and DNS configuration References: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> <37F79D5F.1E17D5FC@gorean.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Doug wrote: > > Richard Morte wrote: > > > Are these "errors" due to nslint's inability to find it's way through > > the config files ( I shouldn't trust nslint's output) or has it found > > something I should investigate further (nslint is good and I've clearly > > got it wrong)? > > It's extremely unlikely that nslint is wrong. However it is impossible > to diagnose further without seeing the zone file. If you're serious > about setting up DNS you should buy and read "DNS and BIND, Third > Edition" from O'Reilly. I have it in front of me now... Lots to get to grips with tho' Ric > > Good luck, > > Doug > -- > "Stop it, I'm gettin' misty." > > - Mel Gibson as Porter, "Payback" > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:17:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp4.erols.com (smtp4.erols.com [207.172.3.237]) by hub.freebsd.org (Postfix) with ESMTP id 395ED14ED4 for ; Sun, 3 Oct 1999 14:17:56 -0700 (PDT) (envelope-from bruce@accumatics.com) Received: from accumatics.com (207-172-178-11.s11.as1.sjc.ca.dialup.rcn.com [207.172.178.11]) by smtp4.erols.com (8.8.8/smtp-v1) with ESMTP id RAA00018 for ; Sun, 3 Oct 1999 17:17:51 -0400 (EDT) Message-ID: <37F7C804.23DB45C4@accumatics.com> Date: Sun, 03 Oct 1999 14:17:56 -0700 From: Bruce Grisham Organization: The AccuMatics Group X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: Sound Blaster Live! Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG How do I get FreeBSD to recognize my PCI SoundBlaster Live! card? How about my PCI modem? Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:28:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from revolution.3-cities.com (revolution.3-cities.com [204.203.224.155]) by hub.freebsd.org (Postfix) with ESMTP id 938A114C28 for ; Sun, 3 Oct 1999 14:28:21 -0700 (PDT) (envelope-from kstewart@3-cities.com) Received: from 3-cities.com (kenn1159.bossig.com [208.26.241.159]) by revolution.3-cities.com (8.9.3/8.9.3) with ESMTP id OAA05217; Sun, 3 Oct 1999 14:28:17 -0700 (PDT) Message-ID: <37F7CA85.D54EBF81@3-cities.com> Date: Sun, 03 Oct 1999 14:28:37 -0700 From: Kent Stewart Organization: BOSSig X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Bruce Grisham Cc: questions@FreeBSD.ORG Subject: Re: Sound Blaster Live! References: <37F7C804.23DB45C4@accumatics.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Bruce Grisham wrote: > > How do I get FreeBSD to recognize my PCI SoundBlaster Live! card? > > How about my PCI modem? I don't know about SB Live but you can check your modem out at http://www.o2.net/~gromitkc/winmodem.html. If it is a winmodem and most PCI modem are, pigs may fly first :). Kent > > Thanks! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:29:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sparc.sweb.com (ip-150-253.gw.total-web.net [209.186.150.253]) by hub.freebsd.org (Postfix) with ESMTP id 3428114C9D; Sun, 3 Oct 1999 14:29:39 -0700 (PDT) (envelope-from zaph0d@sparc.sweb.com) Received: from localhost by sparc.sweb.com (8.9.3/8.9.3) with SMTP id RAA13689; Sun, 3 Oct 1999 17:22:05 -0400 (EDT) Date: Sun, 3 Oct 1999 17:22:04 -0400 (EDT) From: To: Leif Neland Cc: Barry Irwin , Matthias Buelow , hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Fetch/wget/ftp: How to do a recursive ftp-get? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Personally, for recursive gets - I love yafc. It rocks. I also like the interface.. and I could be wrong but I believe it supports usage of the ftp:// directives. On Sun, 3 Oct 1999, Leif Neland wrote: > > > > > BTW.. although risking to be off-topic by miles, I always liked the way > > > how NetBSD's ftp(1) (since 1.4 or so) implemented http and ftp URL > > > fetching and thus eliminated the need for a fetch(1) command. > > > Couldn't the FreeBSD ftp(1) be enhanced that way, [ObTopic, slime slime] > > > to use fetch(3) for that purpose? > > > > This is where a useful tool like wget comes into play. Wget can be pretty > > much used as an automated replacement for fetch, or FTP URL retrieval. Can > > also be plugged into the whole ports system so that it can retrieve the > > ports data packages. > > > > But which tool can do a command-line, recursive ftp-get? wget can't, > because it does not create subdirs below the one specified, i.e. if I do > a wget -r ftp://webmaster:password@webserver.my.dom/htdocs/tree, it will > create the dir webserver.my.dom/htdocs/tree, but not any subdomains to > that. > > Leif > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hackers" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:32:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rknebel.uplink.net (rknebel.uplink.net [209.173.88.243]) by hub.freebsd.org (Postfix) with ESMTP id 4E1A714FA1 for ; Sun, 3 Oct 1999 14:32:27 -0700 (PDT) (envelope-from rknebel@uplink.net) Received: from rknebel.uplink.net (rknebel [209.173.88.243]) by rknebel.uplink.net (8.9.3/8.9.3) with SMTP id RAA02426 for ; Sun, 3 Oct 1999 17:31:25 -0400 (EDT) (envelope-from rknebel@uplink.net) From: Rick Knebel Reply-To: rknebel@uplink.net To: questions@freebsd.org Subject: wordperfect Date: Sun, 3 Oct 1999 17:29:32 -0400 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100317312503.00318@rknebel.uplink.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, i downloaded the wordperfect program to the distfiles and am attempting to install the port. It seems like it is downloading quite a few redhat 5.2 rpms as part of the install. Is this normal? Thanks Rick -- Rick Knebel rknebel@uplink.net http://rknebel.uplink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:38:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from logisticsoftware.co.nz (logisticsoftware.co.nz [202.37.163.1]) by hub.freebsd.org (Postfix) with ESMTP id B6F5D1528A for ; Sun, 3 Oct 1999 14:38:49 -0700 (PDT) (envelope-from jonc@logisticsoftware.co.nz) Received: (from jonc@localhost) by logisticsoftware.co.nz (8.9.3/8.9.3) id KAA16568; Mon, 4 Oct 1999 10:27:15 +1300 (NZDT) Date: Mon, 4 Oct 1999 10:27:14 +1300 (NZDT) From: Jonathan Chen To: Richard Morte Cc: freebsd-questions@freebsd.org Subject: Re: Printing FROM FreeBsd to Windows In-Reply-To: <37F7C71E.ADDB0F41@sinclairassoc.force9.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG [Please do *NOT* remove the Cc: freebsd-questions] On Sun, 3 Oct 1999, Richard Morte wrote: > Thanks for your reply Jonathan, > > Could you expand a little? > Within /etc/printcap, you need an entry similar to: win95|local line printer:\ :sh:\ :lp=/dev/null:\ :sd=/var/spool/lpd/win95:\ :if=/filters/push-to-windows:\ :lf=/var/log/lpd-errs: You need to write the script-file "/filters/push-to-windows" so that that it invokes smbclient to forward incoming stdin to the required Windows printer. --------------------------------------------------------------------- Jonathan Chen | Opportunites are seldom labeled --------------------------------------------------------------------- > Jonathan Chen wrote: > > > > On Sun, 3 Oct 1999, Richard Morte wrote: > > > > > Has anyone discovered if it is possible to attach a shared printer as a > > > FreeDSD resource so that you can print to it from within applications? > > > That is, have the shared (windows) printer appear alongside lp, for > > > example? > > > > In your /etc/printcap, define the printer so that it uses an > > interface script which invokes smbclient. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:39: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from revolution.3-cities.com (revolution.3-cities.com [204.203.224.155]) by hub.freebsd.org (Postfix) with ESMTP id C762615280 for ; Sun, 3 Oct 1999 14:38:55 -0700 (PDT) (envelope-from kstewart@3-cities.com) Received: from 3-cities.com (kenn1159.bossig.com [208.26.241.159]) by revolution.3-cities.com (8.9.3/8.9.3) with ESMTP id OAA06424; Sun, 3 Oct 1999 14:38:51 -0700 (PDT) Message-ID: <37F7CCFF.D2B7DC70@3-cities.com> Date: Sun, 03 Oct 1999 14:39:11 -0700 From: Kent Stewart Organization: BOSSig X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3-Release - problem with PATH? References: <3.0.6.32.19991003122429.008dea80@mail.9netave.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG chris@tourneyland.com wrote: > > I just upgraded from 3.2 Release to 3.3 Release. No problems, except it > seems that now my PATH variable is being ignored. My PATH is just fine, > except trying to execute anything on the path (e.g. bash) gives me 'command > not found'. Using the full path name works fine. > > Does this ring a bell with anyone? It is the kind of response you get when "." isn't in your path. I personally don't have dot in my path and I have to run via ./program. Kent > > Thanks, > Chris > > (P.S. I'm not sure if it's relevant, but I did a reinstall instead of an > upgrade. Just thought I'd mention all possible data.) > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:45:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.wxs.nl (smtp01.wxs.nl [195.121.6.61]) by hub.freebsd.org (Postfix) with ESMTP id 5E80415083 for ; Sun, 3 Oct 1999 14:45:09 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.234]) by smtp01.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC437B; Sun, 3 Oct 1999 23:45:08 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id XAA53223; Sun, 3 Oct 1999 23:45:25 +0200 (CEST) (envelope-from asmodai) Date: Sun, 3 Oct 1999 23:45:25 +0200 From: Jeroen Ruigrok/Asmodai To: Brad Chapman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Need Advice on New PC for FreeBSD Message-ID: <19991003234524.C35757@daemon.ninth-circle.org> References: <37F7C2B0.A01DC28A@earthlink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F7C2B0.A01DC28A@earthlink.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 23:06], Brad Chapman (bradchapman@earthlink.net) wrote: > I am putting together a new computer from scratch to run FreeBSD and >a database (MySQL) backed web server (under Apache). Although I am >familiar with the FreeBSD OS and other stuff, I'm a newbie in terms of >assembling computers. Does anyone have recommendations for components to >build a good system? ie. if you could build your own computer, what >would you put on it? Just trying to collect info and I would appreciate >any advice anyone could give me. Thanks. I just build a very powerful machine with not the newest of components. Basically it is a Abit BP6 mainboard running two Celeron 266 MHz CPU's with 128 MB and a Matrox G200 videocard. It has about 8 GB of HD space. And it does it's job wonderful. Then again I use it for compilation work for CURRENT. But it does it great. You might want to ask on hardware@freebsd.org, or searc hthe archives for that list wrt supported/working hardware. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:48:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id 5BEE2150C9 for ; Sun, 3 Oct 1999 14:48:17 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.234]) by smtp05.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA6553; Sun, 3 Oct 1999 23:48:16 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id XAA54047; Sun, 3 Oct 1999 23:48:37 +0200 (CEST) (envelope-from asmodai) Date: Sun, 3 Oct 1999 23:48:37 +0200 From: Jeroen Ruigrok/Asmodai To: Rick Knebel Cc: questions@freebsd.org Subject: Re: wordperfect Message-ID: <19991003234836.D35757@daemon.ninth-circle.org> References: <99100317312503.00318@rknebel.uplink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <99100317312503.00318@rknebel.uplink.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 23:46], Rick Knebel (rknebel@uplink.net) wrote: >i downloaded the wordperfect program to the distfiles and am attempting to >install the port. > >It seems like it is downloading quite a few redhat 5.2 rpms as part of the >install. WordPerfect does not run natively under FreeBSD. Hence it needs the Linuxlator in order to run since it is a native Linux package. So yes it is normal that it fetches a couple of MB's of Linux stuff. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:52:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from wopr.caltech.edu (wopr.caltech.edu [131.215.240.222]) by hub.freebsd.org (Postfix) with ESMTP id DB51D14D6D; Sun, 3 Oct 1999 14:52:38 -0700 (PDT) (envelope-from mph@wopr.caltech.edu) Received: (from mph@localhost) by wopr.caltech.edu (8.9.3/8.9.1) id OAA62146; Sun, 3 Oct 1999 14:52:33 -0700 (PDT) (envelope-from mph) Date: Sun, 3 Oct 1999 14:52:32 -0700 From: Matthew Hunt To: "Daniel C. Sobral" Cc: Matthias Buelow , hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: ftp is not fetch Message-ID: <19991003145232.B56377@wopr.caltech.edu> References: <19991003072219.F728@altair.mayn.de> <37F71F7F.3C59FFEB@newsguy.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <37F71F7F.3C59FFEB@newsguy.com>; from Daniel C. Sobral on Sun, Oct 03, 1999 at 06:18:55PM +0900 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Oct 03, 1999 at 06:18:55PM +0900, Daniel C. Sobral wrote: > that do not belong in the program. Http handling does not belong in > ftp(1). On the other hand, it is there. wopr:~$ ftp http://localhost/index.html Requesting http://localhost/index.html 100% |**************************************************| 1408 00:00 ETA Successfully retrieved file. -- Matthew Hunt * Inertia is a property http://www.pobox.com/~mph/ * of matter. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 14:55: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from revolution.3-cities.com (revolution.3-cities.com [204.203.224.155]) by hub.freebsd.org (Postfix) with ESMTP id 6CCF31541D for ; Sun, 3 Oct 1999 14:54:50 -0700 (PDT) (envelope-from kstewart@3-cities.com) Received: from 3-cities.com (kenn1159.bossig.com [208.26.241.159]) by revolution.3-cities.com (8.9.3/8.9.3) with ESMTP id OAA07564; Sun, 3 Oct 1999 14:49:17 -0700 (PDT) Message-ID: <37F7CF71.F24A5EFB@3-cities.com> Date: Sun, 03 Oct 1999 14:49:37 -0700 From: Kent Stewart Organization: BOSSig X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Jonathan Chen Cc: Richard Morte , freebsd-questions@FreeBSD.ORG Subject: Re: Printing FROM FreeBsd to Windows References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jonathan Chen wrote: > > [Please do *NOT* remove the Cc: freebsd-questions] > > On Sun, 3 Oct 1999, Richard Morte wrote: > > > Thanks for your reply Jonathan, > > > > Could you expand a little? > > > > Within /etc/printcap, you need an entry similar to: > > win95|local line printer:\ > :sh:\ > :lp=/dev/null:\ > :sd=/var/spool/lpd/win95:\ > :if=/filters/push-to-windows:\ > :lf=/var/log/lpd-errs: > > You need to write the script-file "/filters/push-to-windows" so that > that it invokes smbclient to forward incoming stdin to the required > Windows printer. Have you ever tried adding the Unix services for NT so that you don't have to use Samba. I have always thought that netbeui was the dark side of windows and I don't understand people using that when they can download NFS and LPD for NT. If your systems are Win 9x based it is a different matter. Kent > --------------------------------------------------------------------- > Jonathan Chen | Opportunites are seldom labeled > --------------------------------------------------------------------- > > > Jonathan Chen wrote: > > > > > > On Sun, 3 Oct 1999, Richard Morte wrote: > > > > > > > Has anyone discovered if it is possible to attach a shared printer as a > > > > FreeDSD resource so that you can print to it from within applications? > > > > That is, have the shared (windows) printer appear alongside lp, for > > > > example? > > > > > > In your /etc/printcap, define the printer so that it uses an > > > interface script which invokes smbclient. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Kent Stewart Richland, WA mailto:kstewart@3-cities.com http://www.3-cities.com/~kstewart/index.html http://daily.daemonnews.org/ SETI (Search for Extraterrestrial Intelligence) @ Home http://setiathome.ssl.berkeley.edu/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15: 0:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id C0EA31528A for ; Sun, 3 Oct 1999 15:00:25 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.59]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB5A50; Mon, 4 Oct 1999 00:00:24 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id XAA54873; Sun, 3 Oct 1999 23:54:31 +0200 (CEST) (envelope-from asmodai) Date: Sun, 3 Oct 1999 23:54:31 +0200 From: Jeroen Ruigrok/Asmodai To: Zhihui Zhang Cc: Doug , freebsd-questions@freebsd.org Subject: Re: Install FreeBSD from another machine Message-ID: <19991003235431.E35757@daemon.ninth-circle.org> References: <37F79C52.552F89D9@gorean.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 22:31], Zhihui Zhang (zzhang@cs.binghamton.edu) wrote: >I installed FreeBSD from CD-ROM and via FTP sites many times. But >installing from a NFS server or another filesystem is not well documented. >So please give me a little more information. Simplest installs I did: insert CD in host. Mount CD-ROM. Insert bootdisks into the other hosts, configure everything. Configure network. Set installation media to use ftp and then specify an URL which is the address or ip-address of your host with the CD-ROM mounted. Log in as an user cd simply install from: ftp://host/../../../cdrom or something along those lines depending on set-up. Of course, you could also just change /etc/export, NFS mount the cd-rom driver and use the NFS install option. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15: 0:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 3B4FD14D6D for ; Sun, 3 Oct 1999 15:00:24 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.59]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA5A50; Mon, 4 Oct 1999 00:00:23 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id AAA56869; Mon, 4 Oct 1999 00:00:40 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 00:00:40 +0200 From: Jeroen Ruigrok/Asmodai To: Richard Morte Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: NSLINT and DNS configuration Message-ID: <19991004000040.F35757@daemon.ninth-circle.org> References: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 14:41], Richard Morte (ric@sinclairassoc.force9.co.uk) wrote: >Has anyone used nslint to check the dns configuration? I just used it >and it reports the following: > > missing address A localhost. -> 127.0.0.1 > missing pointer PTR localhost.at.home -> 127.0.0.1 > 127.0.0.1 in use by localhost.at.home & localhost. Had this before. Definately a configuration error. named.conf: zone "1.0.0.127.IN-ADDR.ARPA" { type master; file "db.127.0.0.1"; }; db.127.0.0.1: 1 IN PTR localhost.blah.org. db.blah.org: localhost IN A 127.0.0.1 [blah.org is fictional and only used for the example] >I have checked the configuration and localhost does seem to be clearly >mapped to 127.0.0.1 and vice-versa. This seems to be confirmed by the >final line of nslint's output. > >Are these "errors" due to nslint's inability to find it's way through >the config files ( I shouldn't trust nslint's output) or has it found >something I should investigate further (nslint is good and I've clearly >got it wrong)? nslint is 99% of the time correct. Remember, computer lexers and parsers interpret configurations aimed for computers better than humans ;) HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:18:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id E941814C15 for ; Sun, 3 Oct 1999 15:18:12 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.132]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA64BF; Mon, 4 Oct 1999 00:18:10 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id AAA60322; Mon, 4 Oct 1999 00:11:22 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 00:11:22 +0200 From: Jeroen Ruigrok/Asmodai To: Langa Kentane Cc: FreeBSD Subject: Re: user accounting for web access Message-ID: <19991004001122.H35757@daemon.ninth-circle.org> References: <007f01bf0d83$f7186070$0b02a8c0@sunnet.co.za> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <007f01bf0d83$f7186070$0b02a8c0@sunnet.co.za> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 13:22], Langa Kentane (evablunted@earthling.net) wrote: >Now I want my proxy server to ask each and every user that want to access >the net for a username and passwd and have user accounting. I want to be >able to extract how much the user downloaded and their online time so that >they can be billed for internet usage exceeding a certain amount of meg. Isn't this what SOCKS is for? I could be wrong, but try to look in the ports collection for SOCKS software and else look on www.freshmeat.net to look at diverse projects. Try to find the homepages and read them carefully. And if you found a great product which we don't have in our ports tree you are always welcome to make your own port or alert ports@freebsd.org about this great package and let us know of any tweaking you need to do to get it to work. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:18:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id C5B4214DF6 for ; Sun, 3 Oct 1999 15:18:13 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.132]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB64BF; Mon, 4 Oct 1999 00:18:12 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id AAA60947; Mon, 4 Oct 1999 00:16:02 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 00:16:01 +0200 From: Jeroen Ruigrok/Asmodai To: Jon Cc: questions@freebsd.org Subject: Re: installation Message-ID: <19991004001601.I35757@daemon.ninth-circle.org> References: <37F6E4E1.9784895@home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F6E4E1.9784895@home.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 08:18], Jon (whitehat@home.com) wrote: >I recently bought the 4 CD distribution package of FreeBSD 3.2, and I >have a couple of questions. One: does it support SMC Ultra ethernet >cards? Or specificly the SMC EtherEZ 8416T? Second, will it autodetect >my hardware? Oh, and the most important question: can I make it so I use >Bootmagic as my bootloader, not the default FreeBSD bootloader? If so, >how do I configure it? It would be even better if FreeBSD could just >boot off a floppy...and not use a bootloader. Please respond ASAP...I >want to install it as soon as possible. We do support a number of Ethernet cards of SMC which seems awfully close to your's. Could you specify any other type numbers of the chips on the board? I will look for any specs and see if this board is supported. If you have installed FreeBSD by now by chance and have booted with the card could you do a pciconf -l and mail the output? Yes, it will autodetect your hardware, to a certain degree. Please see the handbook at http://www.freebsd.org/handbook for information about making your own kernel to include support for things which we don't support out of the box. And don't be put of by it. Once you done it, you will like it ;) HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:18:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id CBE4414E98 for ; Sun, 3 Oct 1999 15:18:14 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.132]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC64BF; Mon, 4 Oct 1999 00:18:13 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id AAA57306; Mon, 4 Oct 1999 00:08:07 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 00:08:06 +0200 From: Jeroen Ruigrok/Asmodai To: Dennis Jun Cc: "David J. Fiander" , freebsd-questions@freebsd.org Subject: Re: D-Link 528 NIC? Message-ID: <19991004000805.G35757@daemon.ninth-circle.org> References: <19991003145312.27128.rocketmail@web603.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991003145312.27128.rocketmail@web603.mail.yahoo.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 17:35], Dennis Jun (dennisjun@yahoo.com) wrote: >I'm on the same service from Sympatico, except in Toronto. Yes, >FreeBSD supports the card, becuase it's NE2000 compatible. Just >use ed0 and it should do the trick. > >--- "David J. Fiander" wrote: >> The phone company up here is distributing said card as part of >> the bundle for their aDSL offering. Does 3.3 support it? The >> D-Link folks make a linux driver available that has the word >> "realtek" splattered all over it, so would the realtec FBSD >> driver work for me? Please, could you both tell me if this works. And if this card is a PCI card do a pciconf -l as root for me, and mail me the output of that, where you remove any entries you think are not relevant to the mentioned card. Also, if you needed to tweak anything include that information as well. This way we can mention this card in out supported hardware. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:30:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id DE1D214D60; Sun, 3 Oct 1999 15:30:08 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.137]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA6B3F; Mon, 4 Oct 1999 00:30:07 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id AAA60954; Mon, 4 Oct 1999 00:19:56 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 00:19:56 +0200 From: Jeroen Ruigrok/Asmodai To: Chris Conrad Cc: freebsd-questions@freebsd.org, des@freebsd.org Subject: Re: Problems with NIS Message-ID: <19991004001956.J35757@daemon.ninth-circle.org> References: <19991002234621.A5817@syru205-140.syr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991002234621.A5817@syru205-140.syr.edu> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 08:18], Chris Conrad (chconrad@syr.edu) wrote: >Here's the situation. I've got 2 machines on a network. The gateway >machine (myrdraal) has 2 NIC's, one connected to the outside world, >and the other to my LAN. This machine is running VA Linux System's >distribution of linux (kernel version 2.2.7 with patches for the DoS >attack). ypserv (version 1.3.6.91 according to rpm -q) is running on >this machine. It is also running ypbind and it successfully binds to >itself. The second machine (caemlyn) is running FreeBSD-STABLE (I cvsup'd >everything and did a make world yesterday). Both of the names I gave >are thier names on the LAN. > >The problem is, the FreeBSD machine will not bind to the ypserv >running on myrdraal. The nisdomainname is identical on both machines. >After running ypbind on caemlyn, it returns immediately without error. ypwhich >however, gives an error saying that ypbind could not bind to the >domain. I tried running ypserv on the FreeBSD machine and having it >bind to itself and that worked. Also, the linux machine had no >problems binding to the FreeBSD ypserv. Hmm, Robert Jordan fan, cool ;) Anyways, what people unfortunately forget is that FreeBSD's NIS support is actually a NIS+ implementation. Do you have any /var/log/messages output you could paste to give a better idea of the situation as well as any config files? Also, I cc:-d Dag-Erling, since I believe he knows more about NIS in depth than I do. If this isn't DES, please cc: the person who does know. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:31:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from spirit.jaded.net (dialin264.hamilton.globalserve.net [209.90.139.73]) by hub.freebsd.org (Postfix) with ESMTP id 3930B14FDB for ; Sun, 3 Oct 1999 15:31:52 -0700 (PDT) (envelope-from dan@spirit.jaded.net) Received: (from dan@localhost) by spirit.jaded.net (8.9.3/8.9.3) id SAA07697; Sun, 3 Oct 1999 18:32:27 -0400 (EDT) Date: Sun, 3 Oct 1999 18:32:26 -0400 From: Dan Moschuk To: High Voltage Cc: questions@freebsd.org Subject: Re: @Home connect. Message-ID: <19991003183226.B26799@spirit.jaded.net> References: <37F7CC18.61221AC6@idsmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.7i In-Reply-To: <37F7CC18.61221AC6@idsmail.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG [moved from -current to -questions] You'd want to look at setting up a dhcp client. There's software already on your FreeBSD machine to handle this. Please take a look at dhclient(8). | Hi | | Does anyone know where I can find info on how to set FreeBSD 3.3 | Stable up for a @Home connect? I'm getting @Home installed this Friday | and I'd like to be prepared. | | Thanx | | | | To Unsubscribe: send mail to majordomo@FreeBSD.org | with "unsubscribe freebsd-current" in the body of the message -- Dan Moschuk (TFreak!dan@freebsd.org) "Try not. Do, or do not. There is no try." -- Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:37:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.msen.com (conch.msen.com [148.59.19.5]) by hub.freebsd.org (Postfix) with ESMTP id 24EB314FC3 for ; Sun, 3 Oct 1999 15:37:20 -0700 (PDT) (envelope-from hornyak@hornyaksys.com) Received: from hssntsrv01 (nic-c13-126.mw.mediaone.net [24.131.13.126]) by mail.msen.com (8.9.3/8.9.3) with SMTP id SAA01031 for ; Sun, 3 Oct 1999 18:37:17 -0400 (EDT) From: "Tom Hornyak" To: Subject: SCSI problems/questions Date: Sun, 3 Oct 1999 18:36:49 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I get the following way... too often when booting from install floppies. I was able to go through the install once successfully, but now I am getting the same thing on re-booting from the SCSI disk. Sometimes it does boot successfully! Normal kernel boot/config stuff - from the SCSI disk, no problem...then Waiting 15 seconds for SCSI devices to settle ahc0:A:6 no active SCB for reconnecting target - issuing BUS DEVICE RESET SAVED_TCL == 0x60, ARG_1 == 0xff, SEQ_FLAGS = 0x0 (probe0:ahc0:0:6:1): SCB 0x8 - timed out in datain phase. SEQADDR == 0x14f (probe0:ahc0:0:6:1): BDR message in message buffer (probe0:ahc0:0:6:1): SCB 0x8 - timed out in datain phase. SEQADDR == 0x14f (probe0:ahc0:0:6:1): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Rest. 1SCBs aborted panic: ahc0: brkadrint, Illegal Host Access at seqaddr = 0x0 then goes into automatic reboot. This is an old 486DX250, VLB motherboard, 40mb ram, Adaptec 2842 SCSI controller, no IDE controller, 3COM 3C509 Ethernet. SCSI IDs, 2 = Plextor CD-ROM, 6 = QUANTUM PD1800S (1.8 gig drive), 7 = host adapter. This system was running windows NT successfully before I trashed the disk, DOS boots ok from floppy and has no problems accessing the SCSI devices. I have low level formatted the drive and ran a bad block and surface scan - no problems. This system has successfully run Linux in the past. I am investigating FreeBSD/Apache server for an e-commerce site. So far Linux looks easier to install. Any help would be greatly appreciated. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 15:55:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp13.bellglobal.com (smtp13.bellglobal.com [204.101.251.52]) by hub.freebsd.org (Postfix) with ESMTP id 6F31E14F0E for ; Sun, 3 Oct 1999 15:55:43 -0700 (PDT) (envelope-from ashley@pirovich.com) Received: from insomnia.sympatico.ca (HSE-Ottawa-ppp75521.sympatico.ca [216.208.13.234]) by smtp13.bellglobal.com (8.8.5/8.8.5) with ESMTP id SAA20443; Sun, 3 Oct 1999 18:57:40 -0400 (EDT) Received: (from ashley@localhost) by insomnia.sympatico.ca (8.9.3/8.9.3) id SAA77912; Sun, 3 Oct 1999 18:58:38 -0400 (EDT) (envelope-from ashley) From: ashley Date: Sun, 3 Oct 1999 18:58:37 -0400 To: Tom Hornyak Cc: freebsd-questions@FreeBSD.ORG Subject: Re: SCSI problems/questions Message-ID: <19991003185837.A77697@insomnia.sympatico.ca> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hello, i built a new system a couple days ago and also suffered this problem whne i try to boot the floppies. what i found i had done was i had plugged the terminated end of the 50pin cable into the scsi controler instead of the cdrom. whne i reversed it, the system booted fine everytime. sine you have used the system successfully before this may be a different problem, but i found for me that the cable was incorrectly plugged into the controller/cdrom. Ciao. Ashley. On Sun, 03 Oct 1999, Tom Hornyak wrote: > I get the following way... too often when booting from install floppies. I > was able to go through the install once successfully, but now I am getting > the same thing on re-booting from the SCSI disk. Sometimes it does boot > successfully! > > Normal kernel boot/config stuff - from the SCSI disk, no problem...then > > Waiting 15 seconds for SCSI devices to settle > ahc0:A:6 no active SCB for reconnecting target - issuing BUS DEVICE RESET > SAVED_TCL == 0x60, ARG_1 == 0xff, SEQ_FLAGS = 0x0 > (probe0:ahc0:0:6:1): SCB 0x8 - timed out in datain phase. SEQADDR == 0x14f > (probe0:ahc0:0:6:1): BDR message in message buffer > (probe0:ahc0:0:6:1): SCB 0x8 - timed out in datain phase. SEQADDR == 0x14f > (probe0:ahc0:0:6:1): no longer in timeout, status = 34b > ahc0: Issued Channel A Bus Rest. 1SCBs aborted > panic: ahc0: brkadrint, Illegal Host Access at seqaddr = 0x0 > > then goes into automatic reboot. > > This is an old 486DX250, VLB motherboard, 40mb ram, Adaptec 2842 SCSI > controller, no IDE controller, 3COM 3C509 Ethernet. SCSI IDs, 2 = Plextor > CD-ROM, 6 = QUANTUM PD1800S (1.8 gig drive), 7 = host adapter. > > This system was running windows NT successfully before I trashed the disk, > DOS boots ok from floppy and has no problems accessing the SCSI devices. I > have low level formatted the drive and ran a bad block and surface scan - no > problems. This system has successfully run Linux in the past. > > I am investigating FreeBSD/Apache server for an e-commerce site. So far > Linux looks easier to install. > > Any help would be greatly appreciated. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- ================================================================= Ashley Pirovich ashley@pirovich.com http://pirovich.com "When you have nothing to say, say nothing." Charles Caleb Colton ================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 16:19:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bga.com (mail5.realtime.net [205.238.128.241]) by hub.freebsd.org (Postfix) with SMTP id 54AE714F0E for ; Sun, 3 Oct 1999 16:19:45 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from john ([204.181.161.8]) by -0600 ; Sun, 03 Oct 1999 18:19:41 -0600 Message-Id: <3.0.6.32.19991003182738.01783560@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Sun, 03 Oct 1999 18:27:38 -0500 To: freebsd-questions@freebsd.org From: outlawtx@bga.com Subject: cdrecord question Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am trying to use cdrecord to copy files to a cd in iso9660 format. I have a Yamaha 4416s, cdrecorder that runs on scsi. Can someone tell me what the cdrecord command line syntax is? I have looked at the man pages for cdrecord and can't make any sense of them. I have also looked on the www for more detailed instructions and haven't been able to find any. Thanks, Don James To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 16:37:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bga.com (mail5.realtime.net [205.238.128.241]) by hub.freebsd.org (Postfix) with SMTP id 1266114DE5 for ; Sun, 3 Oct 1999 16:37:32 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from john ([204.181.161.8]) by -0600 ; Sun, 03 Oct 1999 18:37:30 -0600 Message-Id: <3.0.6.32.19991003184527.017f9090@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Sun, 03 Oct 1999 18:45:27 -0500 To: freebsd-questions@freebsd.org From: outlawtx@bga.com Subject: cdrecord question Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am trying to use cdrecord to copy files to a cd in iso9660 format. I have a Yamaha 4416s, cdrecorder that runs on scsi. I have a 300 mhz Intel computer with 64 megs of ram. Can someone tell me what the cdrecord command line syntax is? I have looked at the man pages for cdrecord and can't make any sense of them. I have also looked on the www for more detailed instructions and haven't been able to find any. Thanks, Don James To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 17:13:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 337AB14FF1 for ; Sun, 3 Oct 1999 17:13:25 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id JAA49951 for questions@FreeBSD.org; Mon, 4 Oct 1999 09:43:23 +0930 (CST) Received: from chmls05.mediaone.net (ne.mediaone.net [24.128.1.70]) by freebie.lemis.com (8.9.3/8.9.0) with ESMTP id WAA47510 for ; Sun, 3 Oct 1999 22:17:44 +0930 (CST) Received: from ne.mediaone.net (sderdau.ne.mediaone.net [24.218.2.59]) by chmls05.mediaone.net (8.8.7/8.8.7) with ESMTP id IAA09064 for ; Sun, 3 Oct 1999 08:47:41 -0400 (EDT) Message-ID: <37F75086.E83055B5@ne.mediaone.net> Date: Sun, 03 Oct 1999 08:48:06 -0400 From: "Stephen A. Derdau" X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.2.5-15 i586) X-Accept-Language: en MIME-Version: 1.0 To: Greg Lehey Subject: Re: Is someone trying to hack my system ? References: <37F674E0.619A860F@ne.mediaone.net> <19991003121827.M40186@freebie.lemis.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Sorry you asked how far away web-associates-187-155.digisle.net is : traceroute to 167.216.187.155 (167.216.187.155), 30 hops max, 40 byte packets 1 mnrtr01-mnswt01-vlan13 (24.218.2.1) 2.429 ms 2.157 ms 3.976 ms 2 drrsm01-mnrtr01 (24.128.0.137) 3.006 ms 3.168 ms 3.263 ms 3 lrrtr01-drrsm01 (24.128.0.133) 3.248 ms 3.672 ms 3.652 ms 4 lrgsr01-lrrtr01 (24.128.190.81) 4.154 ms 3.338 ms 4.546 ms 5 lwgsr01-lrgsr01 (24.128.190.57) 3.542 ms 3.984 ms 3.742 ms 6 lwrtr01-lwgsr01 (24.128.190.42) 4.150 ms 4.461 ms 4.557 ms 7 166.48.197.249 (166.48.197.249) 7.406 ms 7.685 ms 8.625 ms 8 corerouter1.WestOrange.cw.net (204.70.9.138) 12.613 ms 11.550 ms 13.233 ms 9 bordercore3.WestOrange.cw.net (166.48.8.1) 11.755 ms 11.140 ms 12.436 ms 10 166.48.9.246 (166.48.9.246) 13.885 ms 13.416 ms 13.191 ms 11 atm0-1-0-402-rt75sc03-sc.digisle.net (167.216.162.102) 87.823 ms 87.329 ms 86.734 ms 12 atm0-1-0-402-rt75sc03-sc.digisle.net (167.216.162.102) 86.785 ms 86.935 ms 86.918 ms 13 atm0-1-0-402-rt75sc03-sc.digisle.net (167.216.162.102) 87.028 ms !X * 87.605 ms !X $ Greg Lehey wrote: > [Format recovered--see http://www.lemis.com/email/email-format.html] > > On Saturday, 2 October 1999 at 17:10:56 -0400, Stephen Derdau wrote: > > Subject: Is someone trying break in ? > > > >> Date: Sat, 02 Oct 1999 17:08:57 -0400 > >> From: Stephen Derdau > >> To: freebsd-questions@ne.mediaone.net > >> > >> I've kinda been working on my security on my systems. IPFW ! > >> Now I'm seeing stuff like this: > >> > >> ipfw 65534 Deny UDP 167.216.187.155:1089 24.218.2.59:1025 in via ed0 > >> ipfw 65534 Deny UDP 24.218.3.41:520 24.218.3.255:520 in via ed0 > >> ipfw: 65534 Deny UDP 167.216.187.155:1089 24.218.2.59:1025 in via ed0 > >> ipfw: 65534 Deny UDP 24.218.2.178:1455 255.255.255.255:8780 in via ed0 > >> ipfw: 65534 Deny UDP 24.218.2.178:1460 255.255.255.255:28001 in via ed0 > >> ipfw: 65534 Deny UDP 24.218.2.49:27901 255.255.255.255:27910 in via ed0 > >> 65534 Deny UDP 24.218.2.127:8093 255.255.255.255:8349 in via ed0 > >> > >> I'm seeing alot of this every few seconds and I'm wondering if this > >> means someone is hacking my system or has or is trying. > > Since your own machine is 24.218.2.59, it would be reasonable to > assume that most of these addresses are on your local net. > 167.216.187.155 is web-associates-187-155.digisle.net. Do you > recognize them? How far away are they? These things could be as > simple as some kind of broadcast packet. > > The rest of your message appears to be a repetition. > > Greg > -- > When replying to this message, please copy the original recipients. > For more information, see http://www.lemis.com/questions.html > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 17:23:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtpsrv1.isis.unc.edu (smtpsrv1.isis.unc.edu [152.2.1.138]) by hub.freebsd.org (Postfix) with ESMTP id 07B2B14FC9 for ; Sun, 3 Oct 1999 17:23:34 -0700 (PDT) (envelope-from daniel_chen@unc.edu) Received: from unc.edu (dhcp2274.dhcp.unc.edu [152.2.174.242]) by smtpsrv1.isis.unc.edu (8.9.3/8.9.1) with ESMTP id UAA29386; Sun, 3 Oct 1999 20:23:33 -0400 (EDT) Message-ID: <37F7F38C.CC6D9F13@unc.edu> Date: Sun, 03 Oct 1999 20:23:40 -0400 From: "Daniel T. Chen" Organization: UNC Chapel Hill X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: "James C. Durham" Cc: freebsd-questions@freebsd.org Subject: Re: cdrecord question X-Priority: 1 (Highest) References: <37F6AA13.1DD15C04@unc.edu> <37F7E1CC.7E65E152@w2xo.pgh.pa.us> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "James C. Durham" wrote: > > I believe you want to change "-data" to "-audio". Also, you > may need to put in -swab. If this is needed, the symptom > is that the CD player says the tracks are there and all > is fine, but you get nothing but hiss with a few hints > of music (caused by the swapping of low and high order > bytes). > > Here is the line I use: > cdrecord -v -swab speed=2 dev=3,0 -audio track*.raw > > I am using tosha to "rip" the tracks. Jim, Thanks for the tip. I think I did not state my question clearly enough, so a lot of people on the list thought I was actually trying to burn them as audio tracks. Actually, I was trying to burn a directory of mp3s in *data* format to disk so that I could just take the CD-R to another computer and play them. So for future reference: mkhybrid -J -o cdimage.raw *.mp3 and cdrecord -v -data speed=8 dev=0,4,0 cdimage.raw Thanks for everyone's input. -d -- Daniel T. Chen daniel_chen@unc.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 17:57:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id A446614E04 for ; Sun, 3 Oct 1999 17:57:32 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11XwRX-000OPX-00; Mon, 4 Oct 1999 01:57:31 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id BAA03466 for ; Mon, 4 Oct 1999 01:57:31 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 01:57:30 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: X server performance Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Has anyone done and benchmarks or unofficial tests of Xservers for FreeBSD versus those for linux? I am trying to make sure that FreeBSD is really the best choice for my laptop workstation. jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 18: 4:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 292CA14E04 for ; Sun, 3 Oct 1999 18:04:35 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id KAA50674; Mon, 4 Oct 1999 10:34:26 +0930 (CST) Date: Mon, 4 Oct 1999 10:34:26 +0930 From: Greg Lehey To: Kenneth Wayne Culver Cc: FreeBSD Questions Subject: Re: FreeBSD 4.0 release Message-ID: <19991004103426.Z40186@freebie.lemis.com> References: <19991003093310.E40186@freebie.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: ; from Kenneth Wayne Culver on Sun, Oct 03, 1999 at 10:06:52AM -0400 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sunday, 3 October 1999 at 10:06:52 -0400, Kenneth Wayne Culver wrote: > On Sun, 3 Oct 1999, Greg Lehey wrote: > >> On Saturday, 2 October 1999 at 7:45:26 -0400, Kenneth Wayne Culver wrote: >>> On Sat, 2 Oct 1999, Greg Lehey wrote: >>> >>>> On Friday, 1 October 1999 at 7:11:12 +0000, Sabre wrote: >>>>>> The questions was "What can I expect from 4.0-RELEASE?" The answer is: >>>>>> 1) Installation bugs. x.0 releases are always a test of grit. :-) >>>>>> 2) A tight, small kernel with hot loadable module support. >>>>>> 3) Vastly improved NFS. >>>>> >>>>> Ya, better NFS! Actually, I'm quite happy with the NFS stuff I have now >>>>> setup (got the permissions all setup and everything is running great :) >>>>> The hot loadable kernel is going to ROCK! >>>> >>>> The kernel won't be hot loadable, you'll just be able to load >>>> modules. In fact, you can do that with 3.3, so this isn't specific to >>>> 4.0. >>> >>> I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will >>> have nearly all the drivers configurable to run as modules or compiled >>> into the kernel. >> >> Well, there isn't much alternative, and that's the way it is with >> 3.3-RELEASE. There will be relatively few differences in 4.0, though >> some programs will attempt to load a module if they find it isn't in >> the kernel. > > I just thought it would be cool maybe to have modules for the sound driver > too. And maybe for the scsi drivers. I mean to give those linux people > another reason to switch. (If we make this an option, many people will > switch from linux, A lot of my friends wouldn't switch until I told them > that FreeBSD has KLDs, which are very similar to linux kernel modules) I'm a fan of klds, but I don't think they're that important, and they pose some interesting problems, which Linux hasn't attempted to solve. I don't expect the SCSI driver to be modularized in the near future, but it's possible that sound would be. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 18:33:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from server7.singular.com (server7.singular.com [204.140.208.10]) by hub.freebsd.org (Postfix) with ESMTP id A479E14E04 for ; Sun, 3 Oct 1999 18:33:53 -0700 (PDT) (envelope-from jbarbee@singular.com) Received: from bleeding-edge (w200.z209220201.lax-ca.dsl.cnc.net [209.220.201.200]) by server7.singular.com (8.8.8/8.8.8) with SMTP id SAA12918 for ; Sun, 3 Oct 1999 18:33:52 -0700 (PDT) (envelope-from jbarbee@singular.com) Message-Id: <4.1.19991003175604.00aa52c0@server7.singular.com> X-Sender: jbarbee@server7.singular.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Sun, 03 Oct 1999 18:34:32 -0700 To: freebsd-questions@freebsd.org From: John Barbee Subject: vinum: faulty plex Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hi, i set up vinum about a week ago. i left it alone and just got back on track today. i imagine if things really are working one of my plexes wouldn't be faulty. i did a reset config but i still have a faulty plex. here is some output. did i do something wrong or is it one of my drives. silence# cat log NO VINOsilence.blackmist.orgsd0+89 ,8Vvolume mirror state up plex name mirror.p0 state up org concat vol mirror plex name mirror.p1 state faulty org concat vol mirror sd name mirror.p0.s0 drive sd0 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 0s sd name mirror.p0.s1 drive sd1 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 4194304s sd name mirror.p1.s0 drive sd2 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 0s sd name mirror.p1.s1 drive sd3 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 4194304s NO VINOsilence.blackmist.orgsd1+8Q ,8 volume mirror state up plex name mirror.p0 state up org concat vol mirror plex name mirror.p1 state faulty org concat vol mirror sd name mirror.p0.s0 drive sd0 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 0s sd name mirror.p0.s1 drive sd1 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 4194304s sd name mirror.p1.s0 drive sd2 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 0s sd name mirror.p1.s1 drive sd3 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 4194304s NO VINOsilence.blackmist.orgsd2+8 ,8 volume mirror state up plex name mirror.p0 state up org concat vol mirror plex name mirror.p1 state faulty org concat vol mirror sd name mirror.p0.s0 drive sd0 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 0s sd name mirror.p0.s1 drive sd1 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 4194304s sd name mirror.p1.s0 drive sd2 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 0s sd name mirror.p1.s1 drive sd3 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 4194304s NO VINOsilence.blackmist.orgsd3+8 ,85volume mirror state up plex name mirror.p0 state up org concat vol mirror plex name mirror.p1 state faulty org concat vol mirror sd name mirror.p0.s0 drive sd0 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 0s sd name mirror.p0.s1 drive sd1 state up len 4194304s driveoffset 265s plex mirror.p0 plexoffset 4194304s sd name mirror.p1.s0 drive sd2 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 0s sd name mirror.p1.s1 drive sd3 state reviving len 4194304s driveoffset 265s plex mirror.p1 plexoffset 4194304s To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 18:35:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 6CB3F14FD4 for ; Sun, 3 Oct 1999 18:35:18 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11Xx25-0002TV-00; Mon, 4 Oct 1999 02:35:17 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id CAA03823 for ; Mon, 4 Oct 1999 02:35:16 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 02:35:16 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: Nicq for FreeBSD??? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Has anyone gotten this client to compile/run? If so, how? I haven't tried yet cause i'm new and i don't want to mess anything up. jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 18:39:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 9963214FB9 for ; Sun, 3 Oct 1999 18:39:23 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id LAA50988; Mon, 4 Oct 1999 11:09:17 +0930 (CST) Date: Mon, 4 Oct 1999 11:09:17 +0930 From: Greg Lehey To: John Barbee Cc: freebsd-questions@FreeBSD.ORG Subject: Re: vinum: faulty plex Message-ID: <19991004110917.C40186@freebie.lemis.com> References: <4.1.19991003175604.00aa52c0@server7.singular.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <4.1.19991003175604.00aa52c0@server7.singular.com>; from John Barbee on Sun, Oct 03, 1999 at 06:34:32PM -0700 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sunday, 3 October 1999 at 18:34:32 -0700, John Barbee wrote: > hi, > > i set up vinum about a week ago. i left it alone and just got back on > track today. i imagine if things really are working one of my plexes > wouldn't be faulty. i did a reset config but i still have a faulty plex. > here is some output. did i do something wrong or is it one of my drives. > > silence# cat log > NO VINOsilence.blackmist.orgsd0+89 > ,8Vvolume mirror state up > plex name mirror.p0 state up org concat vol mirror > plex name mirror.p1 state faulty org concat vol mirror > sd name mirror.p0.s0 drive sd0 state up len 4194304s driveoffset 265s plex > mirror.p0 plexoffset 0s > sd name mirror.p0.s1 drive sd1 state up len 4194304s driveoffset 265s plex > mirror.p0 plexoffset 4194304s > sd name mirror.p1.s0 drive sd2 state reviving len 4194304s driveoffset 265s > plex mirror.p1 plexoffset 0s > sd name mirror.p1.s1 drive sd3 state reviving len 4194304s driveoffset 265s > plex mirror.p1 plexoffset 4194304s If you did a resetconfig (and this output indicates that you did), you have totally wiped out your configuration, so you don't have any plexes. The information here is of purely historical value. The original reason for the crash was probably a disk failure. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 18:45:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mark.iacan.org (mark.iacan.org [208.1.106.133]) by hub.freebsd.org (Postfix) with ESMTP id 5302E14FB9 for ; Sun, 3 Oct 1999 18:45:27 -0700 (PDT) (envelope-from kgun@mark.iacan.org) Received: (from kgun@localhost) by mark.iacan.org (8.9.3/8.9.3) id TAA07323; Sun, 3 Oct 1999 19:44:38 -0600 (MDT) (envelope-from kgun) Date: Sun, 3 Oct 1999 19:44:38 -0600 From: "K. Gunderson" To: Kent Stewart Cc: Oleg Ogurok , Ilia Chipitsine , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release Message-ID: <19991003194438.A7304@mark.iacan.org> References: <37F7BA7C.871DE7DF@3-cities.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: <37F7BA7C.871DE7DF@3-cities.com>; from Kent Stewart on Sun, Oct 03, 1999 at 01:20:12PM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Oct 03, 1999 at 01:20:12PM -0700, Kent Stewart wrote: > > > Oleg Ogurok wrote: > > > > > > > I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will > > > > > have nearly all the drivers configurable to run as modules or compiled > > > > > > ^^^^^^^^^^^^^^^^^^^^^^ > > > > > > it smells like it will be able to run on 4Mb of RAM. > > > is that correct ? > > > > > I am not sure about this, but it will definetely smell (stink) on 4mb ;) > > People, RAM doesn't cost big $$$ anymore ;-) > > I had to laugh at this because I was trying to come up with a polite > response and stink is a funny way to describe the poor performance > such a system will have. I figure the apparent speed of the ram will > be 10 millisecond because my HD's have a 10ms average access time. > > You haven't priced ram since the Taiwan earthquake. The 128MB I have > in a couple of my systems went from $90 US to $324 US. > It's not jsut the earthquake, as prices started climbing well before then. Much of this has to do with Micron's taking over and subsequent closing down of Texas Instruments. Thus they are the only US manufacture left that I am aware of. Moreover, Micron has also suceeded in getting protectionist tarrifs applied to imported RAM. So the writing is on the wall: my 128 MB sticks have gone from $120 to $380 in 2 months, and still climbing. Boo Hiss! So write your congressman people and complain bitterly! -- Ciao--Ken http://www.y2know.org/safari Failure is not an option, it comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 18:54:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id B629915366 for ; Sun, 3 Oct 1999 18:53:58 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id LAA51227; Mon, 4 Oct 1999 11:23:41 +0930 (CST) Date: Mon, 4 Oct 1999 11:23:41 +0930 From: Greg Lehey To: Kenneth Wayne Culver Cc: FreeBSD Questions Subject: Re: FreeBSD 4.0 release Message-ID: <19991004112341.E40186@freebie.lemis.com> References: <19991004103426.Z40186@freebie.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: ; from Kenneth Wayne Culver on Sun, Oct 03, 1999 at 09:51:47PM -0400 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sunday, 3 October 1999 at 21:51:47 -0400, Kenneth Wayne Culver wrote: > On Mon, 4 Oct 1999, Greg Lehey wrote: > >> On Sunday, 3 October 1999 at 10:06:52 -0400, Kenneth Wayne Culver wrote: >>> On Sun, 3 Oct 1999, Greg Lehey wrote: >>> >>>> On Saturday, 2 October 1999 at 7:45:26 -0400, Kenneth Wayne Culver wrote: >>>>> On Sat, 2 Oct 1999, Greg Lehey wrote: >>>>> >>>>>> On Friday, 1 October 1999 at 7:11:12 +0000, Sabre wrote: >>>>>>>> The questions was "What can I expect from 4.0-RELEASE?" The answer is: >>>>>>>> 1) Installation bugs. x.0 releases are always a test of grit. :-) >>>>>>>> 2) A tight, small kernel with hot loadable module support. >>>>>>>> 3) Vastly improved NFS. >>>>>>> >>>>>>> Ya, better NFS! Actually, I'm quite happy with the NFS stuff I have now >>>>>>> setup (got the permissions all setup and everything is running great :) >>>>>>> The hot loadable kernel is going to ROCK! >>>>>> >>>>>> The kernel won't be hot loadable, you'll just be able to load >>>>>> modules. In fact, you can do that with 3.3, so this isn't specific to >>>>>> 4.0. >>>>> >>>>> I was under the impression, (maybe I'm wrong here) that 4.0-RELEASE will >>>>> have nearly all the drivers configurable to run as modules or compiled >>>>> into the kernel. >>>> >>>> Well, there isn't much alternative, and that's the way it is with >>>> 3.3-RELEASE. There will be relatively few differences in 4.0, though >>>> some programs will attempt to load a module if they find it isn't in >>>> the kernel. >>> >>> I just thought it would be cool maybe to have modules for the sound driver >>> too. And maybe for the scsi drivers. I mean to give those linux people >>> another reason to switch. (If we make this an option, many people will >>> switch from linux, A lot of my friends wouldn't switch until I told them >>> that FreeBSD has KLDs, which are very similar to linux kernel modules) >> >> I'm a fan of klds, but I don't think they're that important, and they >> pose some interesting problems, which Linux hasn't attempted to >> solve. I don't expect the SCSI driver to be modularized in the near >> future, but it's possible that sound would be. > > Hmm, well, I just thought it was cool to dynamically load drivers, and > unload them when you no longer need them. And I thought it was even cooler > with actual devices, instead of filesystems and such. I don't know that > I've heard too many of the problems before, but I want to cut my kernel > size down, it's getting up there (1.5 MB) At the end of every message I send to -questions, I write: When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html How likely are you to unload a SCSI driver? In practice, unloading modules has far-reaching effects, and you'll find that, once you've loaded them, most of them are there to stay. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 19:27:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mx.emailqueue.net (mx0.emailqueue.net [209.240.140.250]) by hub.freebsd.org (Postfix) with ESMTP id 2DBE514D59 for ; Sun, 3 Oct 1999 19:27:32 -0700 (PDT) (envelope-from postmaster@paganlibrary.com) Received: from mx0.emailqueue.net (209.75.4.19) by mx.emailqueue.net (8.9.3/8.9.3) with ESMTP id TAA63239 for ; Sun, 3 Oct 1999 19:27:30 -0700 (PDT) (envelope-from postmaster@paganlibrary.com) Received: from gunnar.my.domain (pool0653.cvx15-bradley.dialup.earthlink.net [209.179.46.143]) by mx0.emailqueue.net (8.9.3/8.9.3) with SMTP id TAA43627 for ; Sun, 3 Oct 1999 19:27:17 -0700 (PDT) From: gunnar@paganlibrary.com Organization: The Pagan Library To: FreeBSD-questions Subject: Sounblaster AWE64 PCI Date: Sun, 3 Oct 1999 19:21:15 -0700 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100319261700.00316@gunnar.my.domain> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG After following someone's advice and all else failing... I added controller pnp0 device pcm0 to the kernel and recompiled. Now I at least get the card recognized, sort of. Here's the error message: ---------- Probing for PnP devices: CSN 1 Vendor ID: CTL009d [0x9d008c0e] Serial 0x00029c18 Comp ID: PNPb02f [0x2fb0d041] This is a SB16 PnP, but LDN 0 is disabled ---------- Any ideas what I've gotten myself into this time? Gunnar To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 19:43:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mark.iacan.org (mark.iacan.org [208.1.106.133]) by hub.freebsd.org (Postfix) with ESMTP id 31AC414F60 for ; Sun, 3 Oct 1999 19:43:00 -0700 (PDT) (envelope-from kgun@mark.iacan.org) Received: (from kgun@localhost) by mark.iacan.org (8.9.3/8.9.3) id UAA07401; Sun, 3 Oct 1999 20:42:53 -0600 (MDT) (envelope-from kgun) Date: Sun, 3 Oct 1999 20:42:53 -0600 From: "K. Gunderson" To: Brad Chapman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Need Advice on New PC for FreeBSD Message-ID: <19991003204253.C7304@mark.iacan.org> References: <37F7C2B0.A01DC28A@earthlink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: <37F7C2B0.A01DC28A@earthlink.net>; from Brad Chapman on Sun, Oct 03, 1999 at 05:01:30PM -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Oct 03, 1999 at 05:01:30PM -0400, Brad Chapman wrote: > Hello; > I am putting together a new computer from scratch to run FreeBSD and > a database (MySQL) backed web server (under Apache). Although I am > familiar with the FreeBSD OS and other stuff, I'm a newbie in terms of > assembling computers. Does anyone have recommendations for components to > build a good system? ie. if you could build your own computer, what > would you put on it? Just trying to collect info and I would appreciate > any advice anyone could give me. Thanks. I have built a few boxes from scratch and brought FreBSD up on. I've sort of settled on a config that I like, here's the makeup of the last 4 boxes: ABIT BX6r2 motherboard Celeron 300a (overclocked to 450 MHz) Micron PC100 ECC Ram (ouch! just got *really* expensive) IBM Deskstar HD, 10.2 gig Trident AGP graphics card, 4MB (I don't do xwindows) Netgear 310 TX 10/100 NIC Now I know that somefolks have had trouble with the Netgear cards, but they have worked well for me and are half the cost of the Intel cards. I also got lucky and scored about 6 300a's that overclock like a dream to 450 Mhz. Given that you don't have any slot 1 cpu's on hand, I'd look real hard at a socket 370 CPU/MB combo. I personally love the ABIT boards because of their softmenu that lets me configure them to my hearts desire w/o having to muck around with jumpers. These boards are an overclocker's dream. That said, I suggest you stay away from overclocking unless you've really done your homework. In addition to the ABIT, you might want to consider ASUS, AOpen, and Chaintech, in that order. I used to like Tyan, but would stay away from their present offerings. (Note: I've only brought FreeBSD up on ASUS and ABIT, so am unaware of any issues the others may have.) Most of the boxes I build end up being servers and I don't bother with a cd-rom drive. Same goes for modems. On the ones I do, I like the Toshiba drives and USR/3Com (obviously stay away from Winmodems). I've used around 8 or so IBM Deskstars of various models from 4 gig to 10 gig and never had one fail. I don't care for WD or Quantum drives. I've known people who've had difficulties with the 18 gig IBM drives though. These comments apply to IDE drives only, as I'm too cheap to have the ducats to spare for SCSI. If I did, I'd grab an IBM or Seagate. I personally don't think the dual CPU route is cost effective for FreeBSD. If you need more brute force than the current generation of Intel/AMD offerings can provide, you might as well just build a second box. If you've got the extra ducats to spare for a second CPU, you're probably better off spending it on more RAM, or upgrading from IDE to SCSI, etc. Hope this helps you out some. -- Ciao--Ken http://www.y2know.org/safari Failure is not an option, it comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 19:48:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mtiwmhc02.worldnet.att.net (mtiwmhc02.worldnet.att.net [204.127.131.37]) by hub.freebsd.org (Postfix) with ESMTP id ED46A14DB1 for ; Sun, 3 Oct 1999 19:48:38 -0700 (PDT) (envelope-from tywe@worldnet.att.net) Received: from mach2 ([12.77.216.250]) by mtiwmhc02.worldnet.att.net (InterMail v03.02.07.07 118-134) with SMTP id <19991004024836.OAYK7282@mach2> for ; Mon, 4 Oct 1999 02:48:36 +0000 Message-ID: <00d101bf0e12$d02be100$02ac14ac@mia.bellsouth.net> From: "Shawn M" To: Subject: H.323 proxy Date: Sun, 3 Oct 1999 22:47:34 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I want to be able to use video conferencing on my lan. I am using 2.2.8-STABLE, and natd is my current way of sharing the internet to my lan. From what I have read, I need a H.323 proxy running also in order to use video conferencing behind the firewall. So, the only one I could find for FreeBSD available free was at www.openh323.org . Looked great, but when I tried to use their executable, I got an error stating: ELF binary type not known Abort trap I figured I could just get the source , compile it myself , and everything would be fine.. Wrong, I didn't make it past the first step: compiling PWLIB, which is needed before I could compile the other file. I got quite a few warnings for awhile when compiling, but after a few minutes, it exited with an Error 2. The error is as follows: /usr/include/signal.h:61: declaration of C function 'int sigwait(const unsigned int *, int *)' conflicts with /root/pwlib/include/ptlib/unix/ptlib/pmachdep.h:109: previous declaration 'int sigwait(unsigned int *)' here gmake[1]: *** [/root/pwlib/lib/obj_FreeBSD_x86_r/svcproc.o] Error 1 blah blah then it exits with Error 2 after leaving directories, etc. if anyone can help me get this compiled/working, or suggest something other than openh323, I'd greatly appreciate it! Thanks!! Shawn P.S. I also have trouble with certain FTP's when connecting from behind the LAN. I read that I have to use PASSIVE mode on the client side for it to work. I'm using CuteFTP on the winblows machine, and can't find anywhere to set passive mode except for under "Firewall settings". Do i need to fill this in? Nothing else has needed any special firewall setting? If so, what port is my firewall most likely using? 8668? Thanks! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 19:57:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta2.rcsntx.swbell.net (mta2.rcsntx.swbell.net [151.164.30.26]) by hub.freebsd.org (Postfix) with ESMTP id 3E8AA14D35 for ; Sun, 3 Oct 1999 19:57:46 -0700 (PDT) (envelope-from chris@tourneyland.com) Received: from abc ([216.62.177.1]) by mta2.rcsntx.swbell.net (Sun Internet Mail Server sims.3.5.1999.09.16.21.57.p8) with SMTP id <0FJ2009ZS5K62F@mta2.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Sun, 3 Oct 1999 21:57:43 -0500 (CDT) Date: Sun, 03 Oct 1999 21:56:43 -0500 From: chris@tourneyland.com Subject: Problem installing PHP + MySQL X-Sender: pop992333@mail.9netave.net To: freebsd-questions@freebsd.org Message-id: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Content-type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm trying to get PHP and MySQL working with Apache 1.3.9. I've been trying to follow a HotWired tutorial mentioned on the PHP home page, as well as info from the php and mysql sites themselves. So far, I have php working just fine, except that it doesn't recognize MySQL. I checked this out by making a little web page that calls phpinfo(), and the response page doesn't say anything about MySQL under Extensions (which I read it should if it recognizes MySQL). I've tried to install PHP a number of ways. First, I downloaded the tarball and followed the configure program, using the the --with-mysql= option to specify my MySQL directory. That didn't work. After that I reinstalled FreeBSD for another reason, and I tried again. This time I picked PHP and MySQL from the 'ports to install' menu, so they got installed along with the OS. That didn't work either. After that, I tried to find PHP on my disk, but I couldn't find anything (including mod_php3.c) anyhere. I was confused. So I grabbed PHP again form www.php.net, and tried again. This time I used the setup script instead of configure, but that didn't work. So I tried configure again with the --with-mysql option, and that isn't working. In fact, I'm getting 'unable to find mysql.h' errors, even though I'm using the right directory (and several variations). So what's my damn problem? And what can I do to fix it? The machine isn't currently a production server, so it doesn't really matter what it takes, as long as I can get things working. Thanks! Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 20: 6:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from squeaky.noc.gate.net (squeaky.noc.gate.net [199.227.124.91]) by hub.freebsd.org (Postfix) with ESMTP id 7E2CD14D35 for ; Sun, 3 Oct 1999 20:06:22 -0700 (PDT) (envelope-from jasonv@gate.net) Received: from localhost (jasonv@localhost) by squeaky.noc.gate.net (8.9.3/8.9.3) with ESMTP id XAA02084 for ; Sun, 3 Oct 1999 23:06:24 -0400 (EDT) (envelope-from jasonv@gate.net) X-Authentication-Warning: squeaky.noc.gate.net: jasonv owned process doing -bs Date: Sun, 3 Oct 1999 23:06:24 -0400 (EDT) From: Jason X-Sender: jasonv@squeaky.noc.gate.net To: freebsd-questions@freebsd.org Subject: Problems with wmsound and esound Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am having a couple of small problems with esound and wmsound. I am using a Sound Blaster 32 PnP (ISA), and whenever either of these programs play a sound, the sound card does not reset and it results in a high pitched sound coming out of my speakers that does not go away until I play something with another sound card. Here is my kernel config controller pnp0 controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 and here is what dmesg shows. Probing for PnP devices: CSN 1 Vendor ID: CTL0044 [0x44008c0e] Serial 0x100a455a Comp ID: PNP0600 [0x0006d041] ... sb0 at 0x220 irq 5 drq 1 on isa snd0: sbxvi0 at drq 5 on isa snd0: sbmidi0 at 0x330 on isa snd0: opl0 at 0x388 on isa snd0: Did i enter something wrong, because my card is actually a Sound Blaster 32 and the kernel is seeing it as a Sound Blaster 16. Squeaky To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 20:13:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from squeaky.noc.gate.net (squeaky.noc.gate.net [199.227.124.91]) by hub.freebsd.org (Postfix) with ESMTP id BE1CA14D35 for ; Sun, 3 Oct 1999 20:13:13 -0700 (PDT) (envelope-from jasonv@squeaky.noc.gate.net) Received: (from jasonv@localhost) by squeaky.noc.gate.net (8.9.3/8.9.3) id XAA02109; Sun, 3 Oct 1999 23:12:46 -0400 (EDT) (envelope-from jasonv) Message-Id: <199910040312.XAA02109@squeaky.noc.gate.net> Date: Sun, 3 Oct 1999 23:12:46 -0400 (EDT) From: Jason Subject: Re: Problems with wmsound and esound To: jasonv@gate.net Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: MIME-Version: 1.0 Content-Type: TEXT/plain; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 3 Oct, Jason wrote: > I am having a couple of small problems with esound and wmsound. I am using > a Sound Blaster 32 PnP (ISA), and whenever either of these programs play a > sound, the sound card does not reset and it results in a high pitched > sound coming out of my speakers that does not go away until I play > something with another sound card. Sorry for the typo, I mean another sound program (ex. play, mpg123, xmms) > > Here is my kernel config > > controller pnp0 > controller snd0 > device sb0 at isa? port 0x220 irq 5 drq 1 > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 > device opl0 at isa? port 0x388 > > and here is what dmesg shows. > > Probing for PnP devices: > CSN 1 Vendor ID: CTL0044 [0x44008c0e] Serial 0x100a455a Comp ID: PNP0600 > [0x0006d041] > ... > sb0 at 0x220 irq 5 drq 1 on isa > snd0: > sbxvi0 at drq 5 on isa > snd0: > sbmidi0 at 0x330 on isa > snd0: > opl0 at 0x388 on isa > snd0: > > Did i enter something wrong, because my card is actually a Sound Blaster > 32 and the kernel is seeing it as a Sound Blaster 16. > > Squeaky > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 20:40: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from po3.wam.umd.edu (po3.wam.umd.edu [128.8.10.165]) by hub.freebsd.org (Postfix) with ESMTP id AECA314CF9 for ; Sun, 3 Oct 1999 20:39:51 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac3.wam.umd.edu (root@rac3.wam.umd.edu [128.8.10.143]) by po3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id XAA26094; Sun, 3 Oct 1999 23:39:37 -0400 (EDT) Received: from rac3.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac3.wam.umd.edu (8.9.3/8.9.3) with SMTP id XAA12133; Sun, 3 Oct 1999 23:39:43 -0400 (EDT) Received: from localhost (culverk@localhost) by rac3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id XAA12124; Sun, 3 Oct 1999 23:39:42 -0400 (EDT) X-Authentication-Warning: rac3.wam.umd.edu: culverk owned process doing -bs Date: Sun, 3 Oct 1999 23:39:42 -0400 (EDT) From: Kenneth Wayne Culver To: Greg Lehey Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 4.0 release In-Reply-To: <19991004112341.E40186@freebie.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Well, I didn't mean that one in particular, but just generally. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 21:50:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from compass.OregonVOS.net (compass.oregonvos.net [159.121.170.2]) by hub.freebsd.org (Postfix) with ESMTP id 739B615066 for ; Sun, 3 Oct 1999 21:50:06 -0700 (PDT) (envelope-from th@huppi.com) Received: from sis.huppih.com (ppp8-ast.orednet.org [159.121.170.193]) by compass.OregonVOS.net (8.9.1/8.9.1) with ESMTP id VAA28907; Sun, 3 Oct 1999 21:47:38 -0700 (PDT) Received: from localhost (th@localhost) by sis.huppih.com (8.8.8/8.8.8) with ESMTP id WAA03030; Sun, 3 Oct 1999 22:02:54 -0700 (PDT) (envelope-from th@huppi.com) X-Authentication-Warning: sis.huppih.com: th owned process doing -bs Date: Sun, 3 Oct 1999 22:02:47 -0700 (PDT) From: Tom Huppi X-Sender: th@sis.huppih.com Reply-To: Tom Huppi To: "Dr. Brain" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Merging mail from two souces In-Reply-To: <37F7931E.4A4C9F17@gorean.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG (I think) I have fetchmail snatching mail from my POP3 mailbox at my ISP then delivering it to procmail via the .forward file mechanism. Procmail then either puts each mail into my normal mail spool /var/mail/th or into one of the mailbox files in my ~/mail/ directory as instructed by my ~/.procmailrc recipe. Whether using IMAP instead of POP3 would change things, I just don't know. Also I don't know if and/or where sendmail is involved here. I'd like to, but it doesn't matter too much. At any rate, installing procmail, making a one-line .forward file, and creating a simple .procmailrc (man procmailrc) is all that it took. Part II. I had a mailbox file in ~/mail/ with 1000 mails in it which I wanted filetered via my new .procmailrc. (Primarily to sort out the mail to the various FreeBSD lists into individual mailboxes if you must know :) A line like this worked like a charm: formail -s procmail < temp_mbox_file Note that I have a ~/mail/ directory since that is what my mail agent, pine, set up. Also, you would want to be really carefull that the file you feed into formail (the ftp'd mailbox in your case) is not one which procmail delivers to or you would (I conjecture) get an endless loop. BTW, formail is a little program that comes with procmail and can, with relative safety, do all kinds of nifty things with mailbox files in case you are wondering...I would have been if I had not been exposed to it previously. (man formail) Going on into uncharted territory (for me), it seems like one could make a little script that would 1) induce fetchmail to do it's thing, 2) ftp your mailbox file (and clean up the remote site), and 3) run the ftp'd file through formail. This would be the "merge" that you asked about. Do take my comments with a grain of salt since I am a newbie! There are probably much more straighforward ways of doing what you want. For all I know, you might be able to simply cat the file and your mail spool but I certainly wouldn't want to try it. I think I have just taken 5 times longer to say what Barry said...I mainly wanted to mention what formail was. You wouldn't really need procmail, but once you have it going you may find it handy for all kinds of stuff (man procmailex). -Tom ---------for ref-------- On Sun, 3 Oct 1999, Doug wrote: > Barry Irwin wrote: > > > > On Sat 1999-10-02 (13:51), Dr. Brain wrote: > > > I want to merge mail from two different sources, one is downloaded through > > > fetmail via an IMAP server, and the other is an ftp download from a remote > > > FreeBSD machine. Is there any way I can merge these two together? As I > > > understand it, fetchmail grabs my mail and dumps it into /var/mail/hodeleri. > > > If I wanted to ftp down the other mail, I would put it in /var/mail/hodeleri > > > this seems to be a bit of a problem though. RTFM is appreciated, just point > > > me to the right place. > > Not too sure about the fetchmail details, but as far as I am aware it uses > > your local MTA to deliver the mail it retrieves. For your FTP'd Mailbox, aa > > solution would be to use formail. This can then split your ftp'd mailbox up > > into its constituant messages and pass them onto the appropriate MTA , which > > will then deliver them > Fetchmail can also be configured to use an mda of your choice, like > procmail. That makes it very handy to merge mail from different sources. > I consolidate mail from several different accounts automatically with a > combo of fetchmail, procmail and a couple of scripts to handle extreme > cases. In your .fetchmailrc file do something like this: > > defaults > proto pop3 > fetchall > mda "/usr/local/bin/procmail -f-" > > and you'll be home free. > > Good luck, > > Doug > -- > "Stop it, I'm gettin' misty." > > - Mel Gibson as Porter, "Payback" > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 21:55:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 6E9E015066 for ; Sun, 3 Oct 1999 21:55:43 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id OAA52181; Mon, 4 Oct 1999 14:25:36 +0930 (CST) Date: Mon, 4 Oct 1999 14:25:35 +0930 From: Greg Lehey To: Kenneth Wayne Culver Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD 4.0 release Message-ID: <19991004142535.H40186@freebie.lemis.com> References: <19991004112341.E40186@freebie.lemis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: ; from Kenneth Wayne Culver on Sun, Oct 03, 1999 at 11:39:42PM -0400 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sunday, 3 October 1999 at 23:39:42 -0400, Kenneth Wayne Culver wrote: > Well, I didn't mean that one in particular, but just generally. Sorry, what's this about? Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 22: 2:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id A34E614CA3 for ; Sun, 3 Oct 1999 22:01:55 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11Y0G3-0002uf-00; Mon, 4 Oct 1999 06:01:55 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id GAA04814 for ; Mon, 4 Oct 1999 06:01:54 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 06:01:54 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: sound on laptop Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've tried controller snd0 but the kernel won't compile with this. Someone with the same machine said this worked with his, but i don't see how. We both have Toshiba Satellite 4010's. Anyone have any ideas? I'm pretty sure it's SB 16 or Pro. jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 22:21:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from blockhead.mincom.com (blockhead1.mincom.com [203.55.175.241]) by hub.freebsd.org (Postfix) with ESMTP id 3D2D71539B for ; Sun, 3 Oct 1999 22:21:19 -0700 (PDT) (envelope-from philh@mincom.com) Received: (from uucp@localhost) by blockhead.mincom.com (8.9.3/8.9.3) id PAA72534 for ; Mon, 4 Oct 1999 15:21:17 +1000 (EST) (envelope-from philh@mincom.com) Received: from porthole.mincom.oz.au(172.17.100.2) via SMTP by blockhead.mincom.oz.au, id smtpdp72528; Mon Oct 4 15:21:17 1999 Received: (from philh@localhost) by porthole.mincom.oz.au (8.8.8/8.8.5) id PAA24725 for freebsd-questions@FreeBSD.ORG; Mon, 4 Oct 1999 15:21:16 +1000 (EST) Date: Mon, 4 Oct 1999 15:21:16 +1000 From: Phil Homewood To: freebsd-questions@FreeBSD.ORG Subject: Re: squid, ssl, socks5 and -STABLE Message-ID: <19991004152116.R24094@mincom.com> References: <19991002075858.B32723@mincom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.5i In-Reply-To: <19991002075858.B32723@mincom.com>; from Phil Homewood on Sat, Oct 02, 1999 at 07:58:58AM +1000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Phil Homewood wrote: > I seem to have found a problem with squid 2.2-STABLE4 running > under FreeBSD-3.3-STABLE (cvsupped within the last 36 hours). Some more news to hand: > The squid host sits behind a firewall (also 3.3-STABLE, last > cvsupped a couple of weeks ago.) running SOCKS5. I also have > a second firewall, same config but still running a 3.2-STABLE; > makes no difference which firewall I use. squid and SOCKS5 on the squid host are both as installed by the ports collection. SOCKS5 is 1.0r10. Forgot to mention this earlier, my apologies. > Have I found a buglet in squid, in FreeBSD's socket code, or > am I just doing something terminally stupid? > > (This basic concept has been working fine with squid 1.1.x on > Digital Unix, so I see no theoretical reason why I can't do > what I want to here...) 2.2-STABLE4 tests fine on DU 4.0D with socks5 1.0r10 and the same squid.conf and libsocks5.conf, so it doesn't seem to be a squid buglet. Unless squid is doing something brain-damaged that DU doesn't care about, of course. I'm completely out of ideas, now. Anyone? -- Phil Homewood DNRC email: philh@mincom.com Postmaster and BOFH Mincom Pty Ltd phone: +61-7-3303-3524 Brisbane, QLD Australia fax: +61-7-3303-3269 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 22:39:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from enterprise.sanyusan.se (enterprise.sanyusan.se [195.24.160.51]) by hub.freebsd.org (Postfix) with ESMTP id B583714DB0 for ; Sun, 3 Oct 1999 22:39:37 -0700 (PDT) (envelope-from anders@enterprise.sanyusan.se) Received: (from anders@localhost) by enterprise.sanyusan.se (8.9.3/8.9.3) id HAA16078; Mon, 4 Oct 1999 07:39:44 +0200 (CEST) (envelope-from anders) Date: Mon, 4 Oct 1999 07:39:44 +0200 From: Anders Andersson To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing PHP + MySQL Message-ID: <19991004073944.A15918@enterprise.sanyusan.se> References: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG * chris@tourneyland.com (chris@tourneyland.com) [991004 04:58]: > I'm trying to get PHP and MySQL working with Apache 1.3.9. I've been trying > to follow a HotWired tutorial mentioned on the PHP home page, as well as > info from the php and mysql sites themselves. So far, I have php working > just fine, except that it doesn't recognize MySQL. I checked this out by > making a little web page that calls phpinfo(), and the response page > doesn't say anything about MySQL under Extensions (which I read it should > if it recognizes MySQL). > > I've tried to install PHP a number of ways. First, I downloaded the tarball > and followed the configure program, using the the --with-mysql= option to > specify my MySQL directory. That didn't work. After that I reinstalled > FreeBSD for another reason, and I tried again. This time I picked PHP and > MySQL from the 'ports to install' menu, so they got installed along with > the OS. That didn't work either. After that, I tried to find PHP on my > disk, but I couldn't find anything (including mod_php3.c) anyhere. I was > confused. So I grabbed PHP again form www.php.net, and tried again. This > time I used the setup script instead of configure, but that didn't work. So > I tried configure again with the --with-mysql option, and that isn't > working. In fact, I'm getting 'unable to find mysql.h' errors, even though > I'm using the right directory (and several variations). > > So what's my damn problem? And what can I do to fix it? The machine isn't > currently a production server, so it doesn't really matter what it takes, > as long as I can get things working. > > Thanks! > Chris cd /usr/ports/www/apache13-php3/ ; make install clean Anders -- Anders Andersson anders@sanyusan.se Sanyusan International AB http://www.sanyusan.se/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 22:40:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scotty.masternet.it (scotty.masternet.it [194.184.65.2]) by hub.freebsd.org (Postfix) with ESMTP id 41AB914E3A for ; Sun, 3 Oct 1999 22:40:23 -0700 (PDT) (envelope-from gmarco@scotty.masternet.it) Received: from suzy (modem11.masternet.it [194.184.65.21]) by scotty.masternet.it (8.9.3/8.9.3) with ESMTP id HAA87529; Mon, 4 Oct 1999 07:40:15 +0200 (CEST) (envelope-from gmarco@scotty.masternet.it) Message-Id: <4.2.0.58.19991004074313.00a22590@194.184.65.4> X-Sender: gmarco@scotty.masternet.it X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 04 Oct 1999 07:44:40 +0200 To: Ryan Thompson , freebsd-questions@FreeBSD.ORG From: Gianmarco Giovannelli Subject: Re: ~/bin, ~/etc for chroot'd users In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 03/10/99, Ryan Thompson wrote: >Hi everybody; > >I'm just wondering what the best practice is for the content in the bin/ >and etc/ directories in home directories of users for which chroot is run. >(Both through ftpd, and just regular login shells). Users come and go on >my system with some frequency, and I have a fair number of them. What is >the best way to maintain the content in the etc/ directories of users for >which chroot is run? (In particular, the pwd.db and groups files, as well >as *motd (which change from time to time)). > >Is there a standardized script that I can use with pwd_mkdb to auto >install these files into all users' home directories? Or, am I on my own >to hack something together to suit my tastes? If you like a different approach you can force them use pdksh (in the ports tree) which has a restricted mode. Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://www.giovannelli.it/~gmarco http://www2.masternet.it To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 22:59:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id E949715121 for ; Sun, 3 Oct 1999 22:59:16 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11Y19Q-00051b-00; Mon, 4 Oct 1999 06:59:08 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id GAA05074 for ; Mon, 4 Oct 1999 06:59:07 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 06:59:07 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: (probably) dumb question about ports collection Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG OK, i installed a couple of CD playes from ports, but where are they? In the ports directory, i typed 'make'' and the program was fetched by ftp, and make finished without error. But when i typed the name of the program, it was not found? How can i tell where the program was installed? SHouldn't it be in a directory already in my path? jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 22:59:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mercury.is.co.za (mercury.is.co.za [196.4.160.222]) by hub.freebsd.org (Postfix) with ESMTP id 3C49E15121 for ; Sun, 3 Oct 1999 22:59:22 -0700 (PDT) (envelope-from marcs@is.co.za) Received: from hermwas.is.co.za (hermwas.is.co.za [196.23.0.8]) by mercury.is.co.za (8.9.3/8.9.3) with ESMTP id HAA09643; Mon, 4 Oct 1999 07:59:18 +0200 Received: (from marcs@localhost) by hermwas.is.co.za (8.9.3/8.9.3) id HAA04805; Mon, 4 Oct 1999 07:59:17 +0200 (SAT) Date: Mon, 4 Oct 1999 07:59:17 +0200 From: Marc Silver To: Doug Cc: mick3@attglobal.net, freebsd-questions@FreeBSD.ORG Subject: Re: LI Boot failure Message-ID: <19991004075917.B18242@is.co.za> References: <37F6577B.778EDBA1@attglobal.net> <37F796D8.6E09AE19@gorean.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37F796D8.6E09AE19@gorean.org> X-Operating-System: SunOS 5.6 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG If you have a Windows 9x boot disk lying around, a "fdisk /mbr" often does the trick if you want to get rid of LILO. Cheers, Marc On Sun, Oct 03, 1999 at 10:48:08AM -0700, Doug wrote: > John Michelini wrote: > > > > Every once in a while, I will power my computer on and the bootstrap > > doesn't load; instead I get the two characters "LI" at the top of the > > screen with a blinking cursor next to it, and cannot boot the system. I > > must re-install FreeBSD in order to get around this problem. > > That's a linux LILO problem. If you don't still have linux on your > system you need to find out how to get rid of LILO once and for all. I > assume that the linux lists would have some help for you. You might also > try searching our mail archives since someone else has probably come > across this problem. > > Good luck, > > Doug > -- > "Stop it, I'm gettin' misty." > > - Mel Gibson as Porter, "Payback" > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- Marc Silver IS Hosting Infrastructure The Internet Solution Tel: (+27 11) 283 5500 Fax: (+27 11) 283 5001 E-mail: marcs@is.co.za Web: www.is.co.za To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23: 4:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lvdi.net (Mta.lvdi.net [216.24.138.2]) by hub.freebsd.org (Postfix) with SMTP id 35F50153B3 for ; Sun, 3 Oct 1999 23:04:34 -0700 (PDT) (envelope-from notme@lvdi.net) Received: from lvdi.net ([216.24.141.104]) by 216.24.138.2127.0.0.1 ; Sun, 03 Oct 1999 22:59:02 2000 PDT Message-ID: <37F84597.39CE02C6@lvdi.net> Date: Sun, 03 Oct 1999 23:13:43 -0700 From: Frankie Li X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: (probably) dumb question about ports collection References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG You need to do a "make install" after make. Frankie J McKitrick wrote: > OK, i installed a couple of CD playes from ports, but where are they? In > the ports directory, i typed 'make'' and the program was fetched by ftp, > and make finished without error. But when i typed the name of the > program, it was not found? How can i tell where the program was > installed? SHouldn't it be in a directory already in my path? > > jcm > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23: 7:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from montana.avicom.net (www2.avicom.net [208.128.130.2]) by hub.freebsd.org (Postfix) with ESMTP id BA33714DBA for ; Sun, 3 Oct 1999 23:07:08 -0700 (PDT) (envelope-from ecarlste@cs.montana.edu) Received: from bilbo (pm2-12-178.avicom.net [208.128.130.178]) by montana.avicom.net (8.9.3/8.9.3) with SMTP id AAA06579 for ; Mon, 4 Oct 1999 00:07:06 -0600 (MDT) From: "Erik S. Carlsten" To: Subject: Diamond Monster Sound MX300 Date: Mon, 4 Oct 1999 00:09:33 -0600 Message-ID: <000101bf0e2f$07254cc0$b28280d0@bilbo> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is it possible to configure a Kernel that can handle a Diamond Monster Sound MX300 or will I have to buy a new ISA sound card to get it to work. If the Monster will not work, what is the best card that FreeBSD's Kernel can handle? Thanks, Erik S. Carlsten To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23: 9:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from team7.cba.ualr.edu (team7.cba.ualr.edu [144.167.120.24]) by hub.freebsd.org (Postfix) with ESMTP id 6F87914EEE for ; Sun, 3 Oct 1999 23:09:27 -0700 (PDT) (envelope-from joe@team7.cba.ualr.edu) Received: from access65.mod1.ualr.edu (joe@access65.mod1.ualr.edu [144.167.7.65]) by team7.cba.ualr.edu (8.8.8/8.8.8) with ESMTP id BAA29288; Mon, 4 Oct 1999 01:09:50 -0500 (CDT) Date: Mon, 4 Oct 1999 01:10:53 -0500 (CDT) From: Joe X-Sender: joe@njal.ualr.edu To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: (probably) dumb question about ports collection In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, J McKitrick wrote: > OK, i installed a couple of CD playes from ports, but where are they? In > the ports directory, i typed 'make'' and the program was fetched by ftp, > and make finished without error. But when i typed the name of the > program, it was not found? How can i tell where the program was > installed? SHouldn't it be in a directory already in my path? > > jcm > You need to do a "make install" after a "make", then you can run the program. -Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:27:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailf.telia.com (mailf.telia.com [194.22.194.25]) by hub.freebsd.org (Postfix) with ESMTP id CA74714DC1 for ; Sun, 3 Oct 1999 23:27:15 -0700 (PDT) (envelope-from fredrik.carlen@telia.com) Received: from d1o29.telia.com (root@d1o29.telia.com [194.236.214.241]) by mailf.telia.com (8.9.3/8.9.3) with ESMTP id IAA09401 for ; Mon, 4 Oct 1999 08:27:14 +0200 (CEST) Received: from orcslayer.leonis.net (t1o29p95.telia.com [194.236.214.95]) by d1o29.telia.com (8.8.8/8.8.8) with SMTP id IAA21616 for ; Mon, 4 Oct 1999 08:27:13 +0200 (CEST) From: Fredrik Carlen Reply-To: fredrik.carlen@telia.com To: freebsd-questions@freebsd.org Subject: How do I reinstall the Boot Manager? Date: Sat, 2 Oct 1999 11:34:50 +0200 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100211385100.00317@orcslayer.leonis.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Howdy, pardners! The issue here is really a well-known fact: Windows 95 is a pain in the derriere to work with. Having said that, I will proceed to explain the problem at hand: Windows 95 overwrote my Boot Manager yesterday, when I installed it on my first Microsoft-partition. How do I reinstall the Boot Manager? /Fredrik To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:33:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from laurasia.com.au (lauras.lnk.telstra.net [139.130.93.142]) by hub.freebsd.org (Postfix) with ESMTP id E9E3314DC1 for ; Sun, 3 Oct 1999 23:33:15 -0700 (PDT) (envelope-from mike@laurasia.com.au) Received: (from mike@localhost) by laurasia.com.au (8.9.3/8.9.3) id OAA62519; Mon, 4 Oct 1999 14:33:06 +0800 (WST) (envelope-from mike) From: Michael Kennett Message-Id: <199910040633.OAA62519@laurasia.com.au> Subject: Re: How do I reinstall the Boot Manager? In-Reply-To: <99100211385100.00317@orcslayer.leonis.net> from Fredrik Carlen at "Oct 2, 1999 11:34:50 am" To: fredrik.carlen@telia.com Date: Mon, 4 Oct 1999 14:33:06 +0800 (WST) Cc: freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Fredrik, The 'disklabel' command in *BSD can be used to install bootblocks onto the drive. Have a look at the man page. You might to boot FreeBSD from the floppy drive -- download a rescue disk from ftp..freebsd.org. Mike Kennett (mike@laurasia.com.au) > Howdy, pardners! > The issue here is really a well-known fact: Windows 95 is a pain in the > derriere to work with. Having said that, I will proceed to explain the problem > at hand: Windows 95 overwrote my Boot Manager yesterday, when I installed it on > my first Microsoft-partition. How do I reinstall the Boot Manager? > /Fredrik > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:41:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from storm.FreeBSD.org.uk (storm.freebsd.org.uk [194.242.128.198]) by hub.freebsd.org (Postfix) with ESMTP id 4EA6B14E3A; Sun, 3 Oct 1999 23:41:14 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@localhost [127.0.0.1]) by storm.FreeBSD.org.uk (8.9.3/8.9.3) with ESMTP id HAA22259; Mon, 4 Oct 1999 07:41:07 +0100 (BST) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id HAA00420; Mon, 4 Oct 1999 07:03:52 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910040603.HAA00420@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: "Daniel Hilevich" Cc: "John Hay" , freebsd-hackers@FreeBSD.org, freebsd-questions@FreeBSD.org, ppp/sync project Subject: Re: A bug in the sppp driver? In-reply-to: Your message of "Thu, 30 Sep 1999 09:50:47 BST." <049401bf0b20$e3621c20$2e00a8c0@nt46daniel> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 07:03:51 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > Are you busy with a leased line driver or a dialup/isdn kind of driver? > > I have been busy fixing sppp to work properly with leased line drivers > > again, but am not finished with it yet. :-/ Hopefully I won't break > > the isdn handling at the same time. > > > > I'm writing this pseudo driver with lots of interfaces. Each interface can > be configured to work with a variety of protocols. Currently I'm working on > the connection to the PPP protocol. [.....] You may want to mention this to phk (cc'd). He's done some uncommitted work with a standardised synchronous device interface. The bit I'm interested in is the ioctl() that'll let me know it's a sync device... then ppp/tty.c:tty_Create() can automatically talk to it properly :-) -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:41:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.binep.ac.ru (ns.binep.ac.ru [193.233.37.5]) by hub.freebsd.org (Postfix) with ESMTP id 74A1C1547B for ; Sun, 3 Oct 1999 23:41:18 -0700 (PDT) (envelope-from goshik@binep.ac.ru) Received: from serv2.binep.ac.ru (serv2 [193.233.44.77]) by ns.binep.ac.ru (8.9.2/8.8.8) with SMTP id KAA13695; Mon, 4 Oct 1999 10:38:27 +0400 (MSD) (envelope-from goshik@binep.ac.ru) Reply-To: "Igor B. Bykhalo" From: "Igor B. Bykhalo" To: "Leif Neland" Cc: "-questions@FreeBSD" Subject: Re: Fetch/wget/ftp: How to do a recursive ftp-get? Date: Mon, 4 Oct 1999 10:37:11 +0300 Message-ID: <01bf0e3b$44cfed80$0000e9c1@serv2.binep.ac.ru> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.0913.2206 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.0913.2200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi! -----Original Message----- From: Leif Neland [...] >But which tool can do a command-line, recursive ftp-get? wget can't, ^^^^^^^^^^^ Wrong! Please, do 'info wget' and read... #File: wget.info, Node: Top, Next: Overview, Prev: (dir), Up: (dir) # #Wget 1.5.3 #********** # # This manual documents version 1.5.3 of GNU Wget, the freely #available utility for network download. # # Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc. # #* Menu: # #* Overview:: Features of Wget. #* Invoking:: Wget command-line arguments. #* Recursive Retrieval:: Description of recursive retrieval. #* Following Links:: The available methods of chasing links. [...] #File: wget.info, Node: Recursive Retrieval Options, Next: Recursive Accept/Reject #Options, Prev: FTP Options, Up: Invoking # #Recursive Retrieval Options #=========================== # #`-r' #`--recursive' # Turn on recursive retrieving. *Note Recursive Retrieval:: for more # details. and -m for mirroring... >because it does not create subdirs below the one specified, i.e. if I do >a wget -r ftp://webmaster:password@webserver.my.dom/htdocs/tree, it will >create the dir webserver.my.dom/htdocs/tree, but not any subdomains to >that. > >Leif Regards, Goshik _____________________________________________________ "Where am I, and what am I doing in this handbasket?" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:49:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id 54CD114DB0 for ; Sun, 3 Oct 1999 23:49:30 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id CAA01183; Mon, 4 Oct 1999 02:13:13 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37F84579.143CB424@big-blue.net> Date: Mon, 04 Oct 1999 02:13:13 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: "Erik S. Carlsten" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Diamond Monster Sound MX300 References: <000101bf0e2f$07254cc0$b28280d0@bilbo> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "Erik S. Carlsten" wrote: > Is it possible to configure a Kernel that can handle a Diamond Monster Sound > MX300 or will I have to buy a new ISA sound card to get it to work. If the > Monster will not work, what is the best card that FreeBSD's Kernel can > handle? > > Thanks, > Erik S. Carlsten > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message the best cards for FreeBSD are cards based on CS423x or OPTI931 chipset. SB16/32 works good to. alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:49:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id 1E2D914E3A for ; Sun, 3 Oct 1999 23:49:30 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id AAA00896; Mon, 4 Oct 1999 00:23:24 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37F82BBB.D7113425@big-blue.net> Date: Mon, 04 Oct 1999 00:23:24 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing PHP + MySQL References: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> <3.0.6.32.19991003225911.008e8100@mail.9netave.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG chris@tourneyland.com wrote: > >same happend here. I solve the problem reinstaling mysql apache and php from > >source. first mysql then php apache procedure. > >i tryed couple of times installing it from ports and never worked for me > >alex > > Phew! I'm glad I'm not crazy. Thanks! > > To be clear, what you're suggesting is . . . > > 1) Reinstall mysql > 2) Reinstall php, using the 'for Apache' procedure. > > (I can leave Apache as is) > > Also, do the installs from the tarball sources, and not from ports. > > Do I have to 'uninstall' anything? If so, how? (It seems as if maybe > FreeBSD doesn't have the notion of 'uninstalling'). If not, I'm considering > a clean FreeBSD reinstall to get rid of any possible probs. Of course, > maybe that's the Windows guy in me talking . . . > > Thanks again, > Chris because I messed up my FreeBSD box ;-) i just went in there and rm all the files under respective directoryes. after that I install mysql from source and started mysql server. then I made a fresh install for php and apache from source. If you follow instruction in INSTALL file ( when you unpack php is in the php dir) you shouldn't have any problems. i'm running php with mysql and apache for abt 3 months now and i'm very happy ;-). if you need additional help, let me know. alex p.s. sorry for my English ;-) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:49:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id CBF5014DB0 for ; Sun, 3 Oct 1999 23:49:30 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id AAA00920; Mon, 4 Oct 1999 00:39:11 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37F82F6F.F58494B5@big-blue.net> Date: Mon, 04 Oct 1999 00:39:11 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing PHP + MySQL References: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> <3.0.6.32.19991003225911.008e8100@mail.9netave.net> <3.0.6.32.19991003232824.008e93b0@mail.9netave.net> Content-Type: multipart/mixed; boundary="------------E4C6F33B611B05A6A9D586AD" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------E4C6F33B611B05A6A9D586AD Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit chris@tourneyland.com wrote: > >because I messed up my FreeBSD box ;-) i just went in there and rm all the > files > >under respective directoryes. after that I install mysql from source and > started > >mysql server. then I made a fresh install for php and apache from source. > If you > >follow instruction in INSTALL file ( when you unpack php is in the php > dir) you > >shouldn't have any problems. > >i'm running php with mysql and apache for abt 3 months now and i'm very happy > >;-). > >if you need additional help, let me know. > >alex > >p.s. sorry for my English ;-) > > So, I install mysql, then start the mysql server, then install php, then > install apache? Sorry to be so specific, but I figure if I'm going to do > what works I better make sure what I'm doing. > > Oh, and your English is fine - much better than most programmers! > > - Chris I don't know if my approach is right , but this is what I did. install mysql and start server and follow the attachement file ;-). in any case, next time cc: mailing list because tomorrow someone else might need help on the same subject ;-). let me know if it works ;-). alex --------------E4C6F33B611B05A6A9D586AD Content-Type: text/plain; charset=us-ascii; name="short" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="short" gunzip apache_1.3.x.tar.gz tar xvf apache_1.3.x.tar gunzip php-3.0.x.tar.gz tar xvf php-3.0.x.tar cd apache_1.3.x ./configure --prefix=/www cd ../php-3.0.x ./configure --with-mysql --with-apache=../apache_1.3.x --enable-track-vars make make install cd ../apache_1.3.x ./configure --prefix=/www --activate-module=src/modules/php3/libphp3.a (The above line is correct! Yes, we know libphp3.a does not exist at this stage. It isn't supposed to. It will be created.) make (you should now have an httpd binary which you can copy to your Apache bin dir) cd ../php-3.0.x cp php3.ini-dist /usr/local/lib/php3.ini You can edit /usr/local/lib/php3.ini file to set PHP options. Edit your httpd.conf or srm.conf file and add: AddType application/x-httpd-php3 .php3 --------------E4C6F33B611B05A6A9D586AD-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sun Oct 3 23:49:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id 9970915366 for ; Sun, 3 Oct 1999 23:49:30 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id XAA00855; Sun, 3 Oct 1999 23:45:56 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37F822F4.75CBAB02@big-blue.net> Date: Sun, 03 Oct 1999 23:45:56 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing PHP + MySQL References: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG chris@tourneyland.com wrote: > I'm trying to get PHP and MySQL working with Apache 1.3.9. I've been trying > to follow a HotWired tutorial mentioned on the PHP home page, as well as > info from the php and mysql sites themselves. So far, I have php working > just fine, except that it doesn't recognize MySQL. I checked this out by > making a little web page that calls phpinfo(), and the response page > doesn't say anything about MySQL under Extensions (which I read it should > if it recognizes MySQL). > > I've tried to install PHP a number of ways. First, I downloaded the tarball > and followed the configure program, using the the --with-mysql= option to > specify my MySQL directory. That didn't work. After that I reinstalled > FreeBSD for another reason, and I tried again. This time I picked PHP and > MySQL from the 'ports to install' menu, so they got installed along with > the OS. That didn't work either. After that, I tried to find PHP on my > disk, but I couldn't find anything (including mod_php3.c) anyhere. I was > confused. So I grabbed PHP again form www.php.net, and tried again. This > time I used the setup script instead of configure, but that didn't work. So > I tried configure again with the --with-mysql option, and that isn't > working. In fact, I'm getting 'unable to find mysql.h' errors, even though > I'm using the right directory (and several variations). > > So what's my damn problem? And what can I do to fix it? The machine isn't > currently a production server, so it doesn't really matter what it takes, > as long as I can get things working. > > Thanks! > Chris > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message same happend here. I solve the problem reinstaling mysql apache and php from source. first mysql then php apache procedure. i tryed couple of times installing it from ports and never worked for me alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0: 6:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.calweb.com (mail.calweb.com [209.210.251.12]) by hub.freebsd.org (Postfix) with ESMTP id 46E5D14C19; Mon, 4 Oct 1999 00:06:23 -0700 (PDT) (envelope-from dlangley@calweb.com) Received: from ip74 (ip74.dlangley.calweb.com [207.173.133.74]) by mail.calweb.com (8.9.3/8.9.3) with ESMTP id AAA41509; Mon, 4 Oct 1999 00:06:22 -0700 (PDT) Message-Id: <4.2.0.58.19991004000005.00a8a5c0@pop.calweb.com> X-Sender: dlangley@pop.calweb.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 04 Oct 1999 00:06:18 -0700 To: questions@freebsd.org, freebsd-questions@freebsd.org From: Doug Langley Subject: problem with caching nameserver and localhost Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am attempting to run a caching nameserver on freebsd 3.3-STABLE. I've enabled it in rc.conf, and run the make-localhost script. Every thing works fine until I have servers that try and do a reverse dns query on localhost and my nameserver reports the host is not found. I have host.conf setup to check /etc/hosts first then bind. Any thoughts on why the FreeBSD default nameserver configuration won't properly reverse localhost? Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0: 6:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.calweb.com (mail.calweb.com [209.210.251.12]) by hub.freebsd.org (Postfix) with ESMTP id 46E5D14C19; Mon, 4 Oct 1999 00:06:23 -0700 (PDT) (envelope-from dlangley@calweb.com) Received: from ip74 (ip74.dlangley.calweb.com [207.173.133.74]) by mail.calweb.com (8.9.3/8.9.3) with ESMTP id AAA41509; Mon, 4 Oct 1999 00:06:22 -0700 (PDT) Message-Id: <4.2.0.58.19991004000005.00a8a5c0@pop.calweb.com> X-Sender: dlangley@pop.calweb.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 04 Oct 1999 00:06:18 -0700 To: questions@freebsd.org, freebsd-questions@freebsd.org From: Doug Langley Subject: problem with caching nameserver and localhost Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am attempting to run a caching nameserver on freebsd 3.3-STABLE. I've enabled it in rc.conf, and run the make-localhost script. Every thing works fine until I have servers that try and do a reverse dns query on localhost and my nameserver reports the host is not found. I have host.conf setup to check /etc/hosts first then bind. Any thoughts on why the FreeBSD default nameserver configuration won't properly reverse localhost? Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0:23: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from compass.OregonVOS.net (compass.oregonvos.net [159.121.170.2]) by hub.freebsd.org (Postfix) with ESMTP id 9426F150E4 for ; Mon, 4 Oct 1999 00:22:58 -0700 (PDT) (envelope-from th@huppi.com) Received: from sis.huppih.com (ppp7-ast.orednet.org [159.121.170.194]) by compass.OregonVOS.net (8.9.1/8.9.1) with ESMTP id AAA24374; Mon, 4 Oct 1999 00:20:32 -0700 (PDT) Received: from localhost (th@localhost) by sis.huppih.com (8.8.8/8.8.8) with ESMTP id AAA03638; Mon, 4 Oct 1999 00:35:53 -0700 (PDT) (envelope-from th@huppi.com) X-Authentication-Warning: sis.huppih.com: th owned process doing -bs Date: Mon, 4 Oct 1999 00:35:51 -0700 (PDT) From: Tom Huppi X-Sender: th@sis.huppih.com Reply-To: Tom Huppi To: Joe Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: (probably) dumb question about ports collection In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Joe wrote: > > > On Mon, 4 Oct 1999, J McKitrick wrote: > > > OK, i installed a couple of CD playes from ports, but where are they? In > > the ports directory, i typed 'make'' and the program was fetched by ftp, > > and make finished without error. But when i typed the name of the > > program, it was not found? How can i tell where the program was > > installed? SHouldn't it be in a directory already in my path? Probably, but you could verify this by echo $PATH to see your current path statement, and cd'ing to a directory (like /usr/local/bin/ ) and looking for the file in question I think. Also, don't forget the pkg_info -Ia to see if the system thinks it's installed the package/port. > > jcm > > > You need to do a "make install" after a "make", then you can run the > program. That one got me once! I've been tipped over a couple of times too by not having had the daily script run since the install. One time I wasted half a day trying to figure out why ghostscript wasn't doing the right thing... On my 3.1 (now 3.3) system, periodic daily will run it at will. Maybe coincedence, but as soon as I did this, my printer worked like a champ. There is also a "rehash" command which is, supposedly effective with csh. I have yet to correlate running it with solving any of the particular problems that I have come up against. -Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0:43:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp5.jps.net (smtp5.jps.net [209.63.224.55]) by hub.freebsd.org (Postfix) with ESMTP id 03CD214C26 for ; Mon, 4 Oct 1999 00:43:25 -0700 (PDT) (envelope-from ulairi@jps.net) Received: from ulairi (208-237-196-93.irv.jps.net [208.237.196.93]) by smtp5.jps.net (8.9.3/8.9.0) with SMTP id AAA22524 for ; Mon, 4 Oct 1999 00:43:23 -0700 (PDT) From: "Ulairi" To: "Questions" Subject: RE: Fetch/wget/ftp: How to do a recursive ftp-get? Date: Mon, 4 Oct 1999 00:42:56 -0700 Message-ID: <000101bf0e3c$12bd84a0$5dc4edd0@ulairi> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <01bf0e3b$44cfed80$0000e9c1@serv2.binep.ac.ru> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 the ncftp client supports a recursive get, too. it's in the ports, binaries are also up for grabs on www.ncftp.com -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.0.2i iQA/AwUBN/hZ+FR8Yh25VFLEEQITnwCdGtAWDyKtrmZiJunGmNYyU27pl2kAn2/F JUmhc2vdxu5mlxNln+Lt9ojr =WsEx -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0:44: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from studentmail.liu.se (student.liu.se [130.236.230.10]) by hub.freebsd.org (Postfix) with ESMTP id A20CB14C26 for ; Mon, 4 Oct 1999 00:43:56 -0700 (PDT) (envelope-from johpe159@student.liu.se) Received: from student.liu.se (b152.ryd.student.liu.se [130.236.233.152]) by studentmail.liu.se (Postfix) with ESMTP id 90C5D5CB49 for ; Mon, 4 Oct 1999 09:43:55 +0200 (MET DST) Message-ID: <37F85AE1.7AD7E097@student.liu.se> Date: Mon, 04 Oct 1999 09:44:33 +0200 From: Johan Pettersson X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.3-19990909-RC i386) X-Accept-Language: sv, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: bchunk Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! I have installed bchunk (FreeBSD 3.3) but it want work! I type foo.bin foo.cue foo, then vnconfig /dev/vn0c foo, mount_cd9660 /dev/vn0c /mnt. I' ve got following error >mount_cd9660: Invalid argument. It works when I make a cdimage with mkisofs and make same procedure with vnconfig and mount_cd9660! Doesn't bchunk make a cdimage or ? //thx Johan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0:44: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id B555214C26 for ; Mon, 4 Oct 1999 00:44:03 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.72]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA2971; Mon, 4 Oct 1999 09:44:00 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id JAA63989; Mon, 4 Oct 1999 09:35:20 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 09:35:20 +0200 From: Jeroen Ruigrok/Asmodai To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: sound on laptop Message-ID: <19991004093520.C63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 08:18], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: >I've tried controller snd0 but the kernel won't compile with this. >Someone with the same machine said this worked with his, but i don't >see how. We both have Toshiba Satellite 4010's. Anyone have any >ideas? I'm pretty sure it's SB 16 or Pro. Any reason of not using device pcm0? Also, since you only mention `the kernel won't compile with this', do you mean that the kernel compilation fails to actually complete its compilation or do you mean that after compilation the thing won't get detected? If it is the first please enclose some pasting of the errors and we, as the list, can probably point you to your error. Also a uname -a and the relevant parts of your kernel config file would be welcome as well. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0:44:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 4165615210 for ; Mon, 4 Oct 1999 00:44:07 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.72]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC2971; Mon, 4 Oct 1999 09:44:03 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id JAA63993; Mon, 4 Oct 1999 09:37:57 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 09:37:57 +0200 From: Jeroen Ruigrok/Asmodai To: Anders Andersson Cc: chris@tourneyland.com, freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing PHP + MySQL Message-ID: <19991004093757.D63946@daemon.ninth-circle.org> References: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> <19991004073944.A15918@enterprise.sanyusan.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991004073944.A15918@enterprise.sanyusan.se> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 08:18], Anders Andersson (anders@sanyusan.se) wrote: >* chris@tourneyland.com (chris@tourneyland.com) [991004 04:58]: >> I tried configure again with the --with-mysql option, and that isn't >> working. In fact, I'm getting 'unable to find mysql.h' errors, even though >> I'm using the right directory (and several variations). >> >> So what's my damn problem? And what can I do to fix it? The machine isn't >> currently a production server, so it doesn't really matter what it takes, >> as long as I can get things working. >> >cd /usr/ports/www/apache13-php3/ ; make install clean Well, you could look at how the php3 port is setup and how the MySQL port is setup and use that knowledge to start tinkering yourself. I compiled Apache/PHP for PostgreSQL 6.5.x by myself by reading the accompanying docs and looking at some options in the Makefiles. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 0:51:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 6631E14C7F for ; Mon, 4 Oct 1999 00:51:24 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11Y2te-000FhB-00; Mon, 04 Oct 1999 09:50:58 +0200 From: Sheldon Hearn To: Christopher Michaels Cc: Kristian Rask , freebsd-questions@FreeBSD.ORG Subject: Re: I miss a couple of features ! Do u have a repository for proj ect ideas by non programmers ? In-reply-to: Your message of "Sun, 03 Oct 1999 01:39:06 -0400." <6C37EE640B78D2118D2F00A0C90FCB4401105CC6@site2s1> Date: Mon, 04 Oct 1999 09:50:58 +0200 Message-ID: <60336.939023458@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 03 Oct 1999 01:39:06 -0400, Christopher Michaels wrote: > I'm really just not sure if you missed that part of the question or > if this is your subtle way of saying "no, there is no such thing. If > it's missing write it yourself". (maybe not so blunt). Silly a mistake as it was to make, I did in fact miss the "non programmer" and said what I meant with no intention of a subtle undertone. Sorry about that, Kristian. I missed your point. :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 1: 8:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from tymwsv04.fitweb.or.jp (tymwsv04.fitweb.or.jp [210.166.0.132]) by hub.freebsd.org (Postfix) with ESMTP id 95DD914D1B for ; Mon, 4 Oct 1999 01:08:37 -0700 (PDT) (envelope-from manabu@tko.fitweb.or.jp) Received: from efik499.tko.fitweb.or.jp (tkowr111.tko.fitweb.or.jp [210.166.1.139]) by tymwsv04.fitweb.or.jp (8.9.3/3.7W99060309) id RAA17327 for ; Mon, 4 Oct 1999 17:08:46 +0900 (JST) Message-ID: <000501bf0e40$0d177480$8b01a6d2@tko.fitweb.or.jp> From: "nakashima" To: Subject: =?iso-2022-jp?B?GyRCJUAlJCUiJWsyc0B+JE4+bDlnGyhC?= Date: Mon, 4 Oct 1999 17:11:04 +0900 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-2022-jp" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG $B!!%3%^%s%I#p#p#p$G%@%$%"%k%"%C%W@\B3$7$h$&$H$9$k$H%b%G%`$+$i!I%T%]%Q%]!I$H2;(B $B$,$7$^$9!#(B $B;d$N2H$O%W%C%7%e2s@~$G$J$/%@%$%"%k2s@~!J#2#0#p#p#s!K$J$N$G$9$,!"$I$&$9$l$P$$(B $B$$$N$G$7$g$&$+!)(B $B%b%G%`$N@bL@=q$K$O#A#T!u#P#3!J#2#0#p#p#s%@%$%"%k;XDj!K$H$J$C$F$$$^$7$?!#(B $B$*4j$$$7$^$9!#(B $B!!!!(B $B!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!CfEg!!3X!!(B $B!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!(Bmanabu@tko.fitweb.or.jp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 1:14:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.portal2.com (ns1.portal2.com [203.85.226.193]) by hub.freebsd.org (Postfix) with SMTP id 8A20C14D1B for ; Mon, 4 Oct 1999 01:14:00 -0700 (PDT) (envelope-from yusufg@yusufg.portal2.com) Received: (qmail 19122 invoked from network); 4 Oct 1999 08:12:49 -0000 Received: from yusufg.portal2.com (qmailr@203.85.226.249) by ns1.portal2.com with SMTP; 4 Oct 1999 08:12:49 -0000 Received: (qmail 27747 invoked by uid 500); 4 Oct 1999 08:13:57 -0000 Date: 4 Oct 1999 08:13:57 -0000 Message-ID: <19991004081357.27746.qmail@yusufg.portal2.com> From: Yusuf Goolamabbas To: freebsd-questions@freebsd.org Subject: Would like to mix static IP's and non-routable IP's on a LAN Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have a bunch of static IP's allocated to me (/26) network and I would like to reclaim some static IP's and replace them with non routable IP's (192.168.x.x). I read about NAT and tried to configure a machine with NAT and make it be the gateway. All machines currently have a netmask of 255.255.255.192 and if I use the 192.168.x.x address space. I get a netmask of 255.255.255.0. I am not sure if this mismatch is allowed since the machines are on the same segment Any suggestions on how I can do this ? Cheers, /Yusuf -- Yusuf Goolamabbas yusufg@outblaze.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 1:34:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law-f216.hotmail.com [209.185.130.126]) by hub.freebsd.org (Postfix) with SMTP id 0DE9114F18 for ; Mon, 4 Oct 1999 01:34:53 -0700 (PDT) (envelope-from rene_thiel@hotmail.com) Received: (qmail 45373 invoked by uid 0); 4 Oct 1999 08:34:53 -0000 Message-ID: <19991004083453.45372.qmail@hotmail.com> Received: from 195.233.129.30 by www.hotmail.com with HTTP; Mon, 04 Oct 1999 01:34:52 PDT X-Originating-IP: [195.233.129.30] From: "Rene Thiel" To: freebsd-questions@freebsd.org Subject: tl0 Autoneg. not complet., No Carrier Date: Mon, 04 Oct 1999 08:34:52 GMT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Fans I´ve a problem with my netcard. With FreeBSD 2.2.7 and 3.1 i´ve got a message during boot: tl0 MAC - Address tl0 Autoneg. not complet., No Carrier---> No Network With another OS (Solaris,WinNT) run the netcard. Compaq Netflex mit Chip from Texas Instrument. Who can help me? Rene from Dresden, Germany ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 2:30:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rucus.ru.ac.za (rucus.ru.ac.za [146.231.29.2]) by hub.freebsd.org (Postfix) with SMTP id 6E22514D2B for ; Mon, 4 Oct 1999 02:30:08 -0700 (PDT) (envelope-from bvi@rucus.ru.ac.za) Received: (qmail 21415 invoked by uid 374); 4 Oct 1999 09:32:25 -0000 Date: Mon, 4 Oct 1999 11:32:25 +0200 From: Barry Irwin To: "Stephen A. Derdau" , "Questions @ FreeBSD" Subject: Re: netstat ? Message-ID: <19991004113225.E47240@rucus.ru.ac.za> References: <37F5F531.4F7841D0@ne.mediaone.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat 1999-10-02 (10:57), Ludwig Pummer wrote: > On Sat, 2 Oct 1999, Stephen A. Derdau wrote: > > > doing a netstat -a I see the following > > > > are these anything to be concerned about in regards to security issues > > ?: that is I don't see refrence to anything regarding icmp or *.6011 > > *.6010. I'm not sure what these are and I'd like to be able to > > understand it a little more. > > > > Proto Recv-Q Send-Q Local Address Foreign Address (state) > > udp 0 0 *.bootpc *.* > > icmp 0 0 *.* *.* > > tcp 0 0 *.6011 *.* LISTEN > > tcp 0 0 *.6010 *.* LISTEN > the ICMP just shows you are listening on all possible addresses for ICMP data. As for the 6011, and 6010, these could possibly due to you using ssh, and these are the X11 sockets for the appropriate ssh connctions. Barry -- -------------------------------------------------------------------------- Barry Irwin IRC: balin@zanet (#linux) bvi@moria.org http://rucus.ru.ac.za/~bvi Whois BI414 - PMPN8EZ - http://moria.org -------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 2:39: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pasha.anand.org (pasha.anand.org [199.103.176.41]) by hub.freebsd.org (Postfix) with SMTP id D829E150A1 for ; Mon, 4 Oct 1999 02:38:56 -0700 (PDT) (envelope-from arb@anand.org) Received: (qmail 12165 invoked by uid 1001); 4 Oct 1999 09:38:51 -0000 Date: Mon, 4 Oct 1999 12:38:51 +0300 From: Anand Buddhdev To: questions@freebsd.org Subject: upgrade clobbering my "sendmail" Message-ID: <19991004123851.O11327@africaonline.co.ke> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i Organisation: Africa Online Ltd, P O Box 63017, Nairobi, Kenya X-Phone: +254-2-243775 X-WWW-Homepage: http://www.anand.org X-Duties: SysAdmin, Hostmaster, Postmaster, Programmer, Support Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've done binary upgrades from 3.0 to 3.1, and from 3.1 to 3.2. Both times, the upgrade clobbered my sendmail->qmail link, and overwrote it with the real sendmail. I had to fix it manually both times. Is FreeBSD going to stick to sendmail always, or do they plan on making sendmail an option, so that an upgrade doesn't clobber our qmail/exim/postfix installations? -- See complete headers for more info To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 2:41: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from nets5.rz.rwth-aachen.de (nets5.rz.RWTH-Aachen.DE [137.226.144.13]) by hub.freebsd.org (Postfix) with ESMTP id BD1BB1514C for ; Mon, 4 Oct 1999 02:40:37 -0700 (PDT) (envelope-from kuku@gilberto.physik.RWTH-Aachen.DE) Received: from campino.informatik.rwth-aachen.de (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by nets5.rz.rwth-aachen.de (8.9.1a/8.9.1/7) with ESMTP id LAA11408 for ; Mon, 4 Oct 1999 11:40:36 +0200 (MET DST) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.30.2]) by campino.informatik.rwth-aachen.de (8.9.1a/8.9.1/3) with ESMTP id LAA12522 for ; Mon, 4 Oct 1999 11:40:35 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.9.2/8.6.9) id LAA39225 for questions@freebsd.org; Mon, 4 Oct 1999 11:40:39 +0200 (CEST) Date: Mon, 4 Oct 1999 11:40:39 +0200 (CEST) From: Christoph Kukulies Message-Id: <199910040940.LAA39225@gil.physik.rwth-aachen.de> To: questions@freebsd.org Subject: syslogd unknown priority name "" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG 3.2: I'm continously getting syslogd: unknown priority name "" syslogd: unknown priority name "" in my console log. Is it /etc/login.conf or /etc/syslod.conf? And if yes, what? :-) -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3: 9:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law2-f227.hotmail.com [216.32.181.227]) by hub.freebsd.org (Postfix) with SMTP id 42B5114DF5 for ; Mon, 4 Oct 1999 03:09:12 -0700 (PDT) (envelope-from samueljose@hotmail.com) Received: (qmail 28360 invoked by uid 0); 4 Oct 1999 10:09:11 -0000 Message-ID: <19991004100911.28359.qmail@hotmail.com> Received: from 194.149.80.1 by www.hotmail.com with HTTP; Mon, 04 Oct 1999 03:09:10 PDT X-Originating-IP: [194.149.80.1] From: "Samuel Jose Moses" To: questions@freebsd.org Subject: question on telnet Date: Mon, 04 Oct 1999 03:09:10 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hello how to communicate to a telnet server after connecting to port 23 via a java program?what is the msg to be sent first to the server after establishing the connection? ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:27:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from atlrel1.hp.com (atlrel1.hp.com [156.153.255.210]) by hub.freebsd.org (Postfix) with ESMTP id 74C8814ED7 for ; Mon, 4 Oct 1999 03:27:11 -0700 (PDT) (envelope-from steveroo@mothra.bri.hp.com) Received: from mothra.bri.hp.com (steveroo@mothra.bri.hp.com [15.144.1.185]) by atlrel1.hp.com (8.8.6 (PHNE_17135)/8.8.5tis) with ESMTP id GAA28700 for ; Mon, 4 Oct 1999 06:26:28 -0400 (EDT) Received: from localhost (steveroo@localhost) by mothra.bri.hp.com with ESMTP (8.8.6 (PHNE_17135)/8.7.1) id LAA08734 for ; Mon, 4 Oct 1999 11:26:03 +0100 (BST) Date: Mon, 4 Oct 1999 11:26:02 +0100 (BST) From: Stephen Roome To: questions@freebsd.org Subject: 3.2REL, 34Gb IDE + AMD K7 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, having problems with a large IDE drive on a K7 ... Setup : 3.2 release + 34.2Gb IDE drive (IBM-DPTA-373420) UDMA 66. [CPU : AMD K7 (500MHz)] [1) BIOS really doesn't like this drive, i.e. it doesn't auto detect properly as it (my guess) tries to tell the bios it has >65535 cyls. I can get round that by forcing a geometry of 4160/255/63 from BIOS.. I lose some space, but not much - is there a better way - e.g. using LBA with FreeBSD ? ] However, the GENERIC kernel boots fine, and I've compiled about 20 kernels now (doesn't take long) but every time I reboot the machine just hangs on "changing root device to wd0s1a". The disk is partitioned like so : Partition/Slice 1: 128Mb : FreeBSD (/ only 120->130Mb (can't remember)) Partition/Slice 2: 24000Mb : FAT32 (unused) Partition/Slice 3: about 8000Mb : FreeBSD (/usr 2Gb, /var 128M, swap 256M, /home 5+Gb) Problem is I just can't see anything different between GENERIC and any custom kernel I build other than the custom ones just don't work! Any help appreciated, Steve. [Other info that may help?] Motherboard : FIC SD11 RAM :Single 64Mb 100MHz Dimm Standard (1.44Mb) Floppy drive 40x plain vanilla unbranded cdrom (primary device on 2ary IDE controller) 3.5Gb UDMA33 IDE drive (Slave device on 2ary IDE controller) Can't think of anything else... GENERIC says it's a 686 class CPU, don't know how many other folks have k7's, there not that easy to get here in the UK it would seem... well I had to do some ringing about anyway... But I don't think it's the CPU anyway, but might be a combo of the drive and controller. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:28:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.nuxi.com (nuxi.cs.ucdavis.edu [169.237.7.38]) by hub.freebsd.org (Postfix) with ESMTP id A843714ED7; Mon, 4 Oct 1999 03:28:41 -0700 (PDT) (envelope-from obrien@NUXI.com) Received: (from obrien@localhost) by relay.nuxi.com (8.9.3/8.9.3) id DAA21678; Mon, 4 Oct 1999 03:27:44 -0700 (PDT) (envelope-from obrien) Date: Mon, 4 Oct 1999 03:27:43 -0700 From: "David O'Brien" To: Leif Neland Cc: hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Fetch/wget/ftp: How to do a recursive ftp-get? Message-ID: <19991004032743.A21598@relay.nuxi.com> Reply-To: obrien@FreeBSD.ORG References: <19991003074934.C47240@rucus.ru.ac.za> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre1i In-Reply-To: X-Operating-System: FreeBSD 3.3-RC Organization: The NUXI BSD group X-PGP-Fingerprint: B7 4D 3E E9 11 39 5F A3 90 76 5D 69 58 D9 98 7A X-Pgp-Keyid: 34F9F9D5 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > But which tool can do a command-line, recursive ftp-get? NcFTP versions 2 & 3 can. There are also purely command-line versions, called ncftpget & ncftpput in the `ncftp3' port. -- -- David (obrien@NUXI.com) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:30:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 43094152A7 for ; Mon, 4 Oct 1999 03:30:06 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11Y5MA-000Go1-00; Mon, 04 Oct 1999 12:28:34 +0200 From: Sheldon Hearn To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: how do you access disk 4 of 3.2? In-reply-to: Your message of "Fri, 01 Oct 1999 17:13:02 +0100." Date: Mon, 04 Oct 1999 12:28:34 +0200 Message-ID: <64604.939032914@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 01 Oct 1999 17:13:02 +0100, J McKitrick wrote: > I've tried /stand/sysinstall, post-install configure, then packages > and also additoanl distro sets/ ports collection I think I saw this one in the PR database. I believe that disk4 has /distfiles instead of /ports/distfiles. You may need to use pkg_add for these. :-( Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:33:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ctlmailgw.comptel.com (ctlmailgw.comptel.com [192.102.20.151]) by hub.freebsd.org (Postfix) with ESMTP id 7DC7C14D71 for ; Mon, 4 Oct 1999 03:33:43 -0700 (PDT) (envelope-from stefan.parvu@comptel.com) Received: from miina.comptel.com (unverified [194.240.21.9]) by ctlmailgw.comptel.com (Data Fellows SMTPRS 2.04) with ESMTP id ; Mon, 04 Oct 1999 13:26:37 +0300 Received: from comptel.com (xf174.comptel.com [195.237.135.174]) by miina.comptel.com with ESMTP (8.8.6 (PHNE_14041)/8.7.1) id NAA16669; Mon, 4 Oct 1999 13:33:04 +0300 (EETDST) Message-Id: <37F89082.4D43BA77@comptel.com> Date: Mon, 04 Oct 1999 14:33:22 +0300 From: stefan parvu X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Sheldon Hearn Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: how do you access disk 4 of 3.2? References: <64604.939032914@axl.noc.iafrica.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hi all, The same problem here with 4th cd. You can use pck_add and everything is fine :-) Stef Sheldon Hearn wrote: > > On Fri, 01 Oct 1999 17:13:02 +0100, J McKitrick wrote: > > > I've tried /stand/sysinstall, post-install configure, then packages > > and also additoanl distro sets/ ports collection > > I think I saw this one in the PR database. I believe that disk4 has > /distfiles instead of /ports/distfiles. > > You may need to use pkg_add for these. :-( > > Ciao, > Sheldon. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:41: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 9B08814BF7 for ; Mon, 4 Oct 1999 03:40:51 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11Y5XB-000GuE-00; Mon, 04 Oct 1999 12:39:57 +0200 From: Sheldon Hearn To: Greg Lehey Cc: Sabre , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-reply-to: Your message of "Sat, 02 Oct 1999 11:02:12 +0930." <19991002110212.N496@freebie.lemis.com> Date: Mon, 04 Oct 1999 12:39:57 +0200 Message-ID: <64989.939033597@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 02 Oct 1999 11:02:12 +0930, Greg Lehey wrote: > >> 2) A tight, small kernel with hot loadable module support. > > The kernel won't be hot loadable, you'll just be able to load > modules. In fact, you can do that with 3.3, so this isn't specific to > 4.0. I meant that the loadable module support would be hot. :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:43:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id DA5D515062 for ; Mon, 4 Oct 1999 03:43:01 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11Y5Zo-000Gvu-00; Mon, 04 Oct 1999 12:42:40 +0200 From: Sheldon Hearn To: brad todd Cc: freebsd-questions@FreeBSD.ORG Subject: Re: apps question In-reply-to: Your message of "02 Oct 1999 00:41:45 CST." <19991002052626.E6ACF14DB5@hub.freebsd.org> Date: Mon, 04 Oct 1999 12:42:40 +0200 Message-ID: <65093.939033760@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 02 Oct 1999 00:41:45 CST, bradtodd@netzero.net wrote: > Hello. This is -=Xbl@deR=-. I have a question regarding the FreeBSD > OS. I create, record, edit, and produce music with my computer. I > currently use a PC with programs like Cubase, WaveLab, ACID, Reality, > and such. Having spent some time doing this myself, I can honestly say that there's no _way_ you'll get the same joy out of FreeBSD right now. In the future, who knows? :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 3:46: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from laurasia.com.au (lauras.lnk.telstra.net [139.130.93.142]) by hub.freebsd.org (Postfix) with ESMTP id 3E23014C17 for ; Mon, 4 Oct 1999 03:45:49 -0700 (PDT) (envelope-from mike@laurasia.com.au) Received: (from mike@localhost) by laurasia.com.au (8.9.3/8.9.3) id SAA63376; Mon, 4 Oct 1999 18:45:44 +0800 (WST) (envelope-from mike) From: Michael Kennett Message-Id: <199910041045.SAA63376@laurasia.com.au> Subject: Re: question on telnet In-Reply-To: <19991004100911.28359.qmail@hotmail.com> from Samuel Jose Moses at "Oct 4, 1999 03:09:10 am" To: samueljose@hotmail.com (Samuel Jose Moses) Date: Mon, 4 Oct 1999 18:45:44 +0800 (WST) Cc: questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Samuel, The RFC for telnet is 854 -- you can get it from www.faqs.org, or from the internet society (www.rfc-editor.org). From memory (I can't find my copy of the RFC at the moment), the protocol is fairly straightforward. There is no need to negotiate options, and you should be able to just send straight text. The Telnet protocol defines something called an 'NVT' (Network Virtual Terminal), which defines the characteristics of the control characters. Also, at the top of the 8-bit character space are some reserved characters -- from memory, it is just the byte 255 -- check RFC 854 for details. If your just using straight 7-bit ascii, you shouldn't have any problems. Also, java uses unicode (16-bit) character encodings natively, so you'll have to tell java to convert its characters into ASCII. I've forgotten how to do that, but the JDK docs should tell you. Regards, Mike Kennett (mike@laurasia.com.au) > hello > how to communicate to a telnet server after connecting to port 23 via a > java program?what is the msg to be sent first to the server after > establishing the connection? > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 4:24: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from curlew.cs.man.ac.uk (curlew.cs.man.ac.uk [130.88.13.7]) by hub.freebsd.org (Postfix) with ESMTP id 6C4B1154AB for ; Mon, 4 Oct 1999 04:23:23 -0700 (PDT) (envelope-from Networks.Manager@rncm.ac.uk) Received: from fs3.rncm.ac.uk ([193.63.96.102] helo=rncm.ac.uk) by curlew.cs.man.ac.uk with esmtp (Exim 1.92 #3) id 11Y6DB-000761-00; Mon, 4 Oct 1999 12:23:21 +0100 Received: from RNCM-FS3/SpoolDir by rncm.ac.uk (Mercury 1.44); 4 Oct 99 12:23:23 GMT Received: from SpoolDir by RNCM-FS3 (Mercury 1.44); 4 Oct 99 12:23:07 GMT Received: from selene (193.63.96.96) by rncm.ac.uk (Mercury 1.44); 4 Oct 99 12:23:05 GMT From: "Peter McGarvey" To: , Subject: RE: Problem installing PHP + MySQL Date: Mon, 4 Oct 1999 12:23:02 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: <3.0.6.32.19991003215643.008e4e10@mail.9netave.net> X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I also had a problem getting PHP to work with MySQL. Eventually I discoved that it works if you do it this way: 1. Install MySQL via the package mechanism (I'm sure the ports will also work but I didn't have a burning desire wait for it to compile). 2. Download the sources for PHP and Apache. 3. Follow the QUICK INSTALL instructions from the file INSTALL that comes with PHP. I've included them below. This worked so well I'm planning on doing it this way when I install Apache/PHP on my Solaris machine tonite. --> QUICK INSTALL --> --> gunzip apache_1.3.x.tar.gz --> tar xvf apache_1.3.x.tar --> gunzip php-3.0.x.tar.gz --> tar xvf php-3.0.x.tar --> cd apache_1.3.x --> ./configure --prefix=/www --> cd ../php-3.0.x --> ./configure --with-mysql --with-apache=../apache_1.3.x --enable-track-vars --> make --> make install --> cd ../apache_1.3.x --> ./configure --prefix=/www --activate-module=src/modules/php3/libphp3.a --> (The above line is correct! Yes, we know libphp3.a does not exist at this --> stage. It isn't supposed to. It will be created.) --> make --> (you should now have an httpd binary which you can copy to your Apache bin dir) --> cd ../php-3.0.x --> cp php3.ini-dist /usr/local/lib/php3.ini --> You can edit /usr/local/lib/php3.ini file to set PHP options. --> Edit your httpd.conf or srm.conf file and add: --> AddType application/x-httpd-php3 .php3 TTFN, FNORD -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Peter McGarvey, Networks Manager | email: Networks.Manager@rncm.ac.uk Royal Northern College of Music | tel: +44 (0)161 907 5218 124 Oxford Road, Manchester, | fax: +44 (0)161 273 7611 England M13 9RD | mobile: +44 (0)7887 990564 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of > chris@tourneyland.com > Sent: 04 October 1999 03:57 > To: freebsd-questions@freebsd.org > Subject: Problem installing PHP + MySQL > > > I'm trying to get PHP and MySQL working with Apache 1.3.9. I've > been trying > to follow a HotWired tutorial mentioned on the PHP home page, as well as > info from the php and mysql sites themselves. So far, I have php working > just fine, except that it doesn't recognize MySQL. I checked this out by > making a little web page that calls phpinfo(), and the response page > doesn't say anything about MySQL under Extensions (which I read it should > if it recognizes MySQL). > > I've tried to install PHP a number of ways. First, I downloaded > the tarball > and followed the configure program, using the the --with-mysql= option to > specify my MySQL directory. That didn't work. After that I reinstalled > FreeBSD for another reason, and I tried again. This time I picked PHP and > MySQL from the 'ports to install' menu, so they got installed along with > the OS. That didn't work either. After that, I tried to find PHP on my > disk, but I couldn't find anything (including mod_php3.c) anyhere. I was > confused. So I grabbed PHP again form www.php.net, and tried again. This > time I used the setup script instead of configure, but that > didn't work. So > I tried configure again with the --with-mysql option, and that isn't > working. In fact, I'm getting 'unable to find mysql.h' errors, > even though > I'm using the right directory (and several variations). > > So what's my damn problem? And what can I do to fix it? The machine isn't > currently a production server, so it doesn't really matter what it takes, > as long as I can get things working. > > Thanks! > Chris > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 4:54:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rhymer110.cogsci.ed.ac.uk (rhymer144.cogsci.ed.ac.uk [129.215.144.8]) by hub.freebsd.org (Postfix) with ESMTP id BD3D514D46 for ; Mon, 4 Oct 1999 04:54:35 -0700 (PDT) (envelope-from richard@cogsci.ed.ac.uk) Received: (from richard@localhost) by rhymer110.cogsci.ed.ac.uk (8.9.3/8.9.3) id MAA18751; Mon, 4 Oct 1999 12:50:42 +0100 (BST) Date: Mon, 4 Oct 1999 12:50:42 +0100 (BST) Message-Id: <199910041150.MAA18751@rhymer110.cogsci.ed.ac.uk> From: Richard Tobin Subject: Re: 3.2REL, 34Gb IDE + AMD K7 To: Stephen Roome , questions@FreeBSD.ORG In-Reply-To: Stephen Roome's message of Mon, 4 Oct 1999 11:26:02 +0100 (BST) Organization: just say no Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > However, the GENERIC kernel boots fine Just a vague memory from the distant past, but do GENERIC kernels handle swap differently? Does it work to have swap on a different slice (of the same disk) than root? -- Richard To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 4:59: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from logatome.micronet.fr (logatome-2.francenet.fr [193.149.96.2]) by hub.freebsd.org (Postfix) with ESMTP id 0C08E14C17 for ; Mon, 4 Oct 1999 04:58:57 -0700 (PDT) (envelope-from e-masson@kisoft-services.com) Received: from kisoft-services.com (Nantes11.francenet.net [193.149.110.75]) by logatome.micronet.fr (8.8.8/8.8.8) with ESMTP id NAA26583; Mon, 4 Oct 1999 13:54:59 +0200 (CEST) Message-ID: <37F89317.6BCE43D6@kisoft-services.com> Date: Mon, 04 Oct 1999 13:44:23 +0200 From: Eric MASSON Organization: Kisoft Services X-Mailer: Mozilla 4.6 [fr] (WinNT; I) X-Accept-Language: fr MIME-Version: 1.0 To: mar@bull.se Cc: freebsd-questions@FreeBSD.ORG Subject: Re: pcmcia network card problems 3com and Xircom fail to initialize References: <000101bf0dd0$db2d4900$5ff1b581@pcmarhem> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, > merci Eric, i guessed that the si03 was to do with the modem bit > so I didn't worry about that, I decided to go back to basics and > forget the xircom for now. So : > > - took the unchanged PCCARD config file > - changed pccard.conf to "config 0x1 "ep0" 9 (cards irq) > ran /stand/sysinstall enabled pccard so rc.conf now reads > > pccard_enable="YES" > pccard_ifconfig="ep0" > pccard_mem="0x1020" > ifconfig_ep0="inet 129.181.241.90 netmask 255.255.255.0" > defaultrouter="129.181.241.212" > network_interfaces="ep0 auto" > > on reboot ifconfig -a shows ep0 as unconfigured. > manually running ifconfig ep0 inet 129.181.241.90 netmask 255.255.255.0 > seems to help. > According to pccard_ether when not using DHCP : interface=$1 shift ifconfig $interface $pccard_ifconfig $* $interface is the name of your card, "ep0" here, so $pccard_ifconfig should contain the value of $ifconfig_ep0, try modifying pccard_ifconfig in /etc/rc.conf. (Maybe i'm wrong so other readers answers are welcome) I've always used pccardd with default values in rc.conf : pccard_enable="YES" pccard_ifconfig="DHCP" or pccard_ifconfig="inet xx.xx.xx.xx. netmask xx.xx.xx.xx" Regards Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 4:59:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.cci.dk (ns.cci.dk [194.239.27.66]) by hub.freebsd.org (Postfix) with ESMTP id 65B5114C17 for ; Mon, 4 Oct 1999 04:59:26 -0700 (PDT) (envelope-from pdj@ccieurope.com) Received: from GATEKEEPER by ns.cci.dk with smtp (Exim 1.92 #1) id 11Y6tD-0003bQ-00; Mon, 4 Oct 1999 14:06:47 +0200 Received: from INSIDE by gatekeeper; Mon, 4 Oct 1999 14:13:04 +0200 (MET DST) id (Smail-3.2 1996-Jul-4 #14) Received: by aarhus with Internet Mail Service (5.5.2650.21) id <4HM31XLM>; Mon, 4 Oct 1999 13:58:53 +0200 Message-ID: <57F1FE754246D211A98700805FB79145F658B4@aarhus> From: "Per D. Jensen" To: questions@FreeBSD.ORG Subject: Very Newbie Q Date: Mon, 4 Oct 1999 13:58:52 +0200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all! I've just subscribed to the FreeBSD mailingslist and my first question is: Is it feasible to install FreeBSD via a 56K modem? How many Megs do I have to download to get a system running? Lets say without X for starters; just a mininal BSD UNIX system. JFYI: I'm not new to UNIX, as I've been using Linux for a year or so at home and uses AIX and Solaris (onb a user level) at work. Thanks! -- Per Dalum Jensen - 5506 "The real University is a state of Mind" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 5: 2:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mathserv.mps.ohio-state.edu (mathserv.mps.ohio-state.edu [128.146.111.31]) by hub.freebsd.org (Postfix) with ESMTP id 82AA614C3C for ; Mon, 4 Oct 1999 05:02:39 -0700 (PDT) (envelope-from rishi@math.ohio-state.edu) Received: from math.mps.ohio-state.edu (math.mps.ohio-state.edu [128.146.111.30]) by mathserv.mps.ohio-state.edu (8.9.3/8.9.3) with ESMTP id IAA22890 for ; Mon, 4 Oct 1999 08:02:38 -0400 (EDT) Received: (from rishi@localhost) by math.mps.ohio-state.edu (8.9.3/8.9.3) id VAA08187 for freebsd-questions@freebsd.org; Sat, 2 Oct 1999 21:31:50 -0400 (EDT) From: Rishikesh Message-Id: <199910030131.VAA08187@math.mps.ohio-state.edu> Subject: Couldn't open /usr/libexec/ld.so. To: freebsd-questions@freebsd.org Date: Sat, 2 Oct 1999 21:31:50 -0400 (EDT) X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I just installed FreeBSD 3.2. I get the following message when I try to run netscape (freebsd version). Couldn't open /usr/libexec/ld.so. What should I do? Thank you. Rishi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 5: 7:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailhost.criterion.canon.co.uk (mailhost.criterion.canon.co.uk [194.223.249.254]) by hub.freebsd.org (Postfix) with ESMTP id 3EE151528B for ; Mon, 4 Oct 1999 05:07:11 -0700 (PDT) (envelope-from adamn@csl.com) Received: from csl.com (hermes.criterion.canon.co.uk [194.223.249.13]) by mailhost.criterion.canon.co.uk (8.8.8/8.7.3) with ESMTP id MAA01938; Mon, 4 Oct 1999 12:56:30 +0100 (BST) Message-ID: <37F8985A.C9DAE1FE@csl.com> Date: Mon, 04 Oct 1999 13:06:50 +0100 From: Adam Nealis Organization: Criterion Software, Ltd. X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.0.34 i686) X-Accept-Language: en MIME-Version: 1.0 To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Apache Q - apache.conf vs httpd.conf? References: <3.0.6.32.19991002222634.008c5890@mail.9netave.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG chris@tourneyland.com wrote: > > Hey all, > > I was trying to configure my Apache (1.3.6), and none of the changes I was > making to httpd.conf seemed to be making a difference. I figured that was > my fault, till I noticed a file named apache.conf in the same directory. So > I tried editing it instead and all is well. > > I'm a little nervous about both being in the directory though. Do they both > belong there? That seems unlikely. One thing I was thinking, is that I did > an just did an install of Apache 1.3.6, even though it may have already > been installed. Since I've been using Apache 1.3.6 on Windows (yeah, I > know) for a few months now, I know that it uses httpd.conf, so I wouldn't > expect a change. But does the problem lie therein? > > Or more succinctly - I would like to kill httpd.conf if it isn't doing > anything. Apache from the ports tells the apache ./confgure script to use GNU layout. That includes compiling into apache that it's config file is apache.conf. As well as not using httpd.conf any more, two other stupid files, srm.conf and access.conf are "officially" merged into apache.conf as well. If you're nervous about consigning httpd.conf to the bit bucket, try this: cd /usr/local/etc/apache mv http.conf Httpd.conf /usr/local/sbin/apachectl -t (Tells apache to do a syntax test on its default conf file) If apache complains about bo config file, you know it's using httpd.conf. Otherwise it's using apache.conf. Probably. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 5:51:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pluto.ipass.net (pluto.ipass.net [198.79.53.5]) by hub.freebsd.org (Postfix) with ESMTP id A7C4014F18 for ; Mon, 4 Oct 1999 05:51:31 -0700 (PDT) (envelope-from dsl@ipass.net) Received: from ipass.net (ppp-1-4.dialup.rdu.ipass.net [209.170.132.4]) by pluto.ipass.net (8.9.3/8.9.3) with ESMTP id IAA05521; Mon, 4 Oct 1999 08:51:28 -0400 (EDT) Message-ID: <37F8A55B.207F4CA@ipass.net> Date: Mon, 04 Oct 1999 09:02:19 -0400 From: Danny LaPrade X-Mailer: Mozilla 4.51 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: network with single Modem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Version: FreeBsd 3.3 Situation: Client Machine is RedHat, I will call machine C. Server Machine is FreeBSD3.3, I will call machine S C has default gateway set to S. C and S have hosts file containing information about each other. C can ping S and vice versus. S can ping www.freebsd.org (it has auto dial modem configured). And yes, when S dials modem it adds the IP given by ISP as default. S machine has rc.conf w/ gateway_enable="YES" and router_enable="YES" Question: Why can't the C machine use S machine as gateway to the outside world? What am I missing? Note: If I do a traceroute www.freebsd.org, it goes to the S machine and then basicly stops... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 5C9DF14BEB for ; Mon, 4 Oct 1999 06:10:06 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA1300; Mon, 4 Oct 1999 15:10:05 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65109; Mon, 4 Oct 1999 15:05:04 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:05:04 +0200 From: Jeroen Ruigrok/Asmodai To: Samuel Jose Moses Cc: questions@freebsd.org Subject: Re: question on telnet Message-ID: <19991004150504.Y63946@daemon.ninth-circle.org> References: <19991004100911.28359.qmail@hotmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991004100911.28359.qmail@hotmail.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 12:39], Samuel Jose Moses (samueljose@hotmail.com) wrote: >hello > how to communicate to a telnet server after connecting to port 23 via a >java program?what is the msg to be sent first to the server after >establishing the connection? Since you know Java, you can probably decode a C program as well, so feel free to look at: /usr/src/usr/bin/telnet/telnet.c Since I know little about network programming yet I cannot [at this moment] help you much other than pointing you at some source code. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best If I am telling you the Truth now, do you believe it? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id A2E7C1556D for ; Mon, 4 Oct 1999 06:10:06 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB1300; Mon, 4 Oct 1999 15:10:05 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65126; Mon, 4 Oct 1999 15:07:23 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:07:23 +0200 From: Jeroen Ruigrok/Asmodai To: Christoph Kukulies Cc: questions@freebsd.org Subject: Re: syslogd unknown priority name "" Message-ID: <19991004150723.Z63946@daemon.ninth-circle.org> References: <199910040940.LAA39225@gil.physik.rwth-aachen.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <199910040940.LAA39225@gil.physik.rwth-aachen.de> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 12:17], Christoph Kukulies (kuku@gilberto.physik.RWTH-Aachen.DE) wrote: > >3.2: > >I'm continously getting > > syslogd: unknown priority name "" > syslogd: unknown priority name "" > >in my console log. Which programs are logged before or after those messages? What daemons/programs are running when it logs that messages? [hint: ps -ax] Because I think some program is trying to issue a syslog() funtion but it fills the first parameter of syslog(priority,...) wrongly and thus you get a `unknown priority name'. See syslog(3). HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best United we stand, divided we fall. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 3CB1A155AC for ; Mon, 4 Oct 1999 06:10:07 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC1300; Mon, 4 Oct 1999 15:10:06 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA65019; Mon, 4 Oct 1999 14:41:18 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 14:41:18 +0200 From: Jeroen Ruigrok/Asmodai To: Anand Buddhdev Cc: questions@freebsd.org Subject: Re: upgrade clobbering my "sendmail" Message-ID: <19991004144118.S63946@daemon.ninth-circle.org> References: <19991004123851.O11327@africaonline.co.ke> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991004123851.O11327@africaonline.co.ke> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 11:42], Anand Buddhdev (arb@anand.org) wrote: >I've done binary upgrades from 3.0 to 3.1, and from 3.1 to 3.2. Both >times, the upgrade clobbered my sendmail->qmail link, and overwrote it >with the real sendmail. I had to fix it manually both times. Is FreeBSD >going to stick to sendmail always, or do they plan on making sendmail an >option, so that an upgrade doesn't clobber our qmail/exim/postfix >installations? Aside from the tons of projects I have I am also looking into making MTA a more modular choice for advanced and guru users within sysinstall. It will surely mean that sendmail gets kicked to ports. But if you feel like helping have a go at the sysinstall sources. /usr/src/release/sysinstall FYI, HAND, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Delirious again, mesmerise my senses, our Souls entwine one more time... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 30E09155B4 for ; Mon, 4 Oct 1999 06:10:10 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAG1300; Mon, 4 Oct 1999 15:10:09 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65094; Mon, 4 Oct 1999 15:00:38 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:00:38 +0200 From: Jeroen Ruigrok/Asmodai To: Kent Stewart Cc: Bruce Grisham , questions@FreeBSD.ORG Subject: Re: Sound Blaster Live! Message-ID: <19991004150038.W63946@daemon.ninth-circle.org> References: <37F7C804.23DB45C4@accumatics.com> <37F7CA85.D54EBF81@3-cities.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F7CA85.D54EBF81@3-cities.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 23:46], Kent Stewart (kstewart@3-cities.com) wrote: >Bruce Grisham wrote: >> How do I get FreeBSD to recognize my PCI SoundBlaster Live! card? >> >> How about my PCI modem? > >I don't know about SB Live but you can check your modem out at >http://www.o2.net/~gromitkc/winmodem.html. If it is a winmodem and >most PCI modem are, pigs may fly first :). Indeed the PCI modem will probably not be supported. Whine to your computer sales people about their terrific choice of modems which are only usable under Windows. Sure makes you feel like you made a good investment eh? The Soundblaster Live isn't supported in 2.2.x for all I know. I don't think it is in 3.x either. And I just looked at the driver support for PCI cards in 4.0-CURRENT and it seems that you can it to use at least the SB-16 mode but none of the other functions for all I know. Come to think of it, this might also be the case on 3.x. Feel free to bug Creative about releasing specs without NDA and send those to Cameron Grant so he can add support for the card. If anyone is willing to donate hardware, ask him for his mailing address and send him a card he doesn't currently support =)) -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best To do injustice is more disgraceful than to suffer it. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id F2FA4155AD for ; Mon, 4 Oct 1999 06:10:08 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAD1300; Mon, 4 Oct 1999 15:10:07 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA65064; Mon, 4 Oct 1999 14:50:22 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 14:50:22 +0200 From: Jeroen Ruigrok/Asmodai To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: Nicq for FreeBSD??? Message-ID: <19991004145022.U63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 04:18], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: >Has anyone gotten this client to compile/run? If so, how? I haven't >tried yet cause i'm new and i don't want to mess anything up. In your home directory create a dir called extract cd to that dir assuming it is a tar.gz package simply do tar xvfz ../wherever/you/placed/the/file.tar.gz and it will extract and gzip -d the contents into a seperate directory in the extract directory [at least if it was packaged in the nicq-x.y way]. Now follow the instructions on how to compile it. Merely compiling it won't damage your system, not `infect' it with crud. Only when you make install it will you make modifications to the base system. Hope this helps to lower your `fear' of trying to compile things =) Kind regards, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best My name is Legion: for we are many. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 83A6E155B0 for ; Mon, 4 Oct 1999 06:10:09 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAF1300; Mon, 4 Oct 1999 15:10:08 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA65070; Mon, 4 Oct 1999 14:54:07 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 14:54:07 +0200 From: Jeroen Ruigrok/Asmodai To: Jason Cc: freebsd-questions@freebsd.org Subject: Re: Problems with wmsound and esound Message-ID: <19991004145407.V63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 08:18], Jason (jasonv@gate.net) wrote: >I am having a couple of small problems with esound and wmsound. I am using >a Sound Blaster 32 PnP (ISA), and whenever either of these programs play a >sound, the sound card does not reset and it results in a high pitched >sound coming out of my speakers that does not go away until I play >something with another sound card. Weird. Either way, I have a Soundblaster AWE-32 which I use since 2.2.[78] 3.x and 4.0-CURRENT with: controller pnp0 device pcm0 You might wish to look at those entries in your LINT file and see if that does work for you. Because it does for me: pcm0: at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 Notice how it is detected as SB-16, which is logical since the AWE-32 isn't different from the standard SB-16 in terms of what it can do and such. They just added a lot of extra stuff which makes it `32'. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best With malice toward none; with charity for all. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 89A6A155CA for ; Mon, 4 Oct 1999 06:10:08 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAE1300; Mon, 4 Oct 1999 15:10:07 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65098; Mon, 4 Oct 1999 15:03:00 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:03:00 +0200 From: Jeroen Ruigrok/Asmodai To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: X server performance Message-ID: <19991004150300.X63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 04:18], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: >Has anyone done and benchmarks or unofficial tests of Xservers for FreeBSD >versus those for linux? I am trying to make sure that FreeBSD is really >the best choice for my laptop workstation. Non-commercial we only have XFree for all I know. And I do not know of any benchmarks that shows the difference between those two. On the commercial front we have two or three commercial vendors offering X-servers. XiG is one which I know from the top of my head, I have no clue who those others were again. But who know, mayhaps someone has done a test, I am curious about the results though. What laptop is it btw? I have used a Dell Latitude CP with great pleasure together with FreeBSD 3.x and XFree 3.3.3.1 and upwards. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Take thy beak from out my heart and take thy form from off my door! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:10:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id BF3EE155CB for ; Mon, 4 Oct 1999 06:10:11 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.58]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAH1300; Mon, 4 Oct 1999 15:10:10 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA65057; Mon, 4 Oct 1999 14:46:39 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 14:46:39 +0200 From: Jeroen Ruigrok/Asmodai To: Tom Huppi Cc: Joe , J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: (probably) dumb question about ports collection Message-ID: <19991004144639.T63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 09:45], Tom Huppi (th@huppi.com) wrote: >There is also a "rehash" command which is, supposedly effective >with csh. I have yet to correlate running it with solving any of >the particular problems that I have come up against. rehash: rehash Cause the internal hash table of the contents of the directories in the path variable to be recomputed. This is needed if new commands are added to directories in the path while you are logged in. This should only be necessary if you add commands to one of your own directories, or if a systems programmer changes the contents of a system directory. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Today I'll attend a new planet Earth, after you sir... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:28:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 73F8514D1B for ; Mon, 4 Oct 1999 06:28:15 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id JAA00835; Mon, 4 Oct 1999 09:19:04 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Mon, 4 Oct 1999 09:19:04 -0400 (EDT) From: Alex V P To: Michael Kennett Cc: fredrik.carlen@telia.com, freebsd-questions@FreeBSD.ORG Subject: Re: How do I reinstall the Boot Manager? In-Reply-To: <199910040633.OAA62519@laurasia.com.au> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG also , you can use read this: http://www.freebsd.org/FAQ/install.html#AEN484 alex On Mon, 4 Oct 1999, Michael Kennett wrote: > Hi Fredrik, > > The 'disklabel' command in *BSD can be used to install bootblocks onto the > drive. Have a look at the man page. You might to boot FreeBSD from the > floppy drive -- download a rescue disk from ftp..freebsd.org. > > Mike Kennett > (mike@laurasia.com.au) > > > Howdy, pardners! > > The issue here is really a well-known fact: Windows 95 is a pain in the > > derriere to work with. Having said that, I will proceed to explain the problem > > at hand: Windows 95 overwrote my Boot Manager yesterday, when I installed it on > > my first Microsoft-partition. How do I reinstall the Boot Manager? > > /Fredrik > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:30:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from voyager.c-com.net (voyager.c-com.net [209.127.0.2]) by hub.freebsd.org (Postfix) with ESMTP id BD40415519 for ; Mon, 4 Oct 1999 06:30:05 -0700 (PDT) (envelope-from tbrock@mail.phoenix.net) Received: from fdho-w5.fdnet.com (dial35.as2.c-com.net [209.127.52.141]) by voyager.c-com.net (8.9.3/8.9.1) with SMTP id IAA09739; Mon, 4 Oct 1999 08:29:57 -0500 (CDT) From: Tony Reply-To: tbrock@mail.phoenix.net Organization: NA To: ChrisMic@clientlogic.com, freebsd-questions@freebsd.org Subject: RE: KDE themes Date: Mon, 4 Oct 1999 08:20:41 -0500 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain References: <6C37EE640B78D2118D2F00A0C90FCB4401105CC0@site2s1> In-Reply-To: <6C37EE640B78D2118D2F00A0C90FCB4401105CC0@site2s1> MIME-Version: 1.0 Message-Id: <99100408310700.37693@fdho-w5.fdnet.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 30 Sep 1999, you wrote: > Folks, > Every seems to be sidestepping the solution. Install KDE 1.1.2, which is in > the current ports collection and that does have the theme manager. > > -Chris I'd like to add a little insight on installing the 1.1.2 port. This actually applies to ALL ports if you maintain an older system. I've found that you can avoid many headaches if you reinstall every port dependancy when dealing with window managers. It seems to me that we need better version control in the dependancy tree. Just because a /var/db/pkg/portname says it is installed doesn't necessarily mean the correct version is really there. Find the dependent libraries and api's in /usr/ports (graphics and x11), make deinstall and make reinstall those suckers if you have any problems. I even went so far as to reinstall dependencies of those such as libtool and gettext just to get a few of these libraries to compile correctly. This is on a cvsup'ed 3.3-R/ports machine and I've seen problems like this for a long time. If there is some utility to help avoid these situations I've not yet run across it. Tony To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:31:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from nimbus.superior.net (nimbus.superior.net [206.153.96.1]) by hub.freebsd.org (Postfix) with ESMTP id 9858F1545C for ; Mon, 4 Oct 1999 06:31:47 -0700 (PDT) (envelope-from robert@nimbus.superior.net) Received: (from robert@localhost) by nimbus.superior.net (8.9.3/8.9.3/RB) id JAA20354 for freebsd-questions@freebsd.org; Mon, 4 Oct 1999 09:31:47 -0400 (EDT) From: Robert Blayzor Message-Id: <199910041331.JAA20354@nimbus.superior.net> Subject: 3.3-STABLE buildworld To: freebsd-questions@freebsd.org Date: Mon, 4 Oct 1999 09:31:47 -0400 (EDT) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm having a problem buildworlding off the most recent 3.3-stable update. On several machines, I'm getting this error and the buildworld dies: rm -f .depend /usr/obj/usr/src/secure/lib/libcrypt/GPATH /usr/obj/usr/src/secure/lib/libcrypt/GRTAGS /usr/obj/usr/src/secure/lib/libcrypt/GSYMS /usr/obj/usr/src/secure/lib/libcrypt/GTAGS cc -O -pipe -I/usr/src/secure/lib/libcrypt/../../../lib/libmd -I/usr/src/secure/lib/libcrypt/../../../lib/libcrypt -DNONEXPORTABLE_CRYPT -DLIBC_SCCS -Wall -I/usr/obj/usr/src/tmp/usr/include -c /usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c -o crypt.o /usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c: In function `crypt': /usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c:62: warning: unused variable `j' /usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c: At top level: /usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c:14: warning: `rcsid' defined but not used make: don't know how to make crypt-md5.c. Stop Anyone else experience the same problem? -- Robert Blayzor robert@superior.net Telecon Communications MIS/Programmer/Admin Network Engineer 131 Enterprise Rd. Superior Net Services 518-762-3456 Johnstown, NY 12095 "FreeBSD! Putting the 'Operating' back into OS!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:40:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from voyager.c-com.net (voyager.c-com.net [209.127.0.2]) by hub.freebsd.org (Postfix) with ESMTP id 6EFE514C37 for ; Mon, 4 Oct 1999 06:40:02 -0700 (PDT) (envelope-from tbrock@mail.phoenix.net) Received: from fdho-w5.fdnet.com (dial35.as2.c-com.net [209.127.52.141]) by voyager.c-com.net (8.9.3/8.9.1) with SMTP id IAA12482 for ; Mon, 4 Oct 1999 08:39:58 -0500 (CDT) From: Tony Reply-To: tbrock@mail.phoenix.net Organization: NA To: freebsd-questions@freebsd.org Subject: GNOME: Does anyone use it? Date: Mon, 4 Oct 1999 08:32:00 -0500 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100408410801.37693@fdho-w5.fdnet.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I see many screenshots from the Linux community where people use this glorified toolbar but from my experience, it's most reliable feature is creating .core files. I've compiled and recompiled this port from the ground up several different times over the past 9 months and I never can seem to find the functionality of it. (recompiling the latest port dependancies, reinstalling etc.) I load up a window-manager, start an xterm and type "panel" at which point I get the main GNOME toolbar. If I try to configure it, it core dumps, if I do most anything it core dumps. It never wants to switch away from enlightenment being the default manager etc. My question is this: Are any people in the FreeBSD community using the GNOME port happily? Did I skip a fundamental /home/userdir setup script? It's not important that I get it working, I just like to know why things aren't working as they should. Tony To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:42:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 7E4E714C37 for ; Mon, 4 Oct 1999 06:42:08 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11Y8NR-000Lcv-00; Mon, 4 Oct 1999 14:42:05 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA08398; Mon, 4 Oct 1999 14:42:04 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 14:42:04 +0100 (BST) From: J McKitrick To: Jeroen Ruigrok/Asmodai Cc: freebsd-questions@freebsd.org Subject: Re: Nicq for FreeBSD??? In-Reply-To: <19991004145022.U63946@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks. Do you know if it works pretty well? jcm On Mon, 4 Oct 1999, Jeroen Ruigrok/Asmodai wrote: |On [19991004 04:18], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: |>Has anyone gotten this client to compile/run? If so, how? I haven't |>tried yet cause i'm new and i don't want to mess anything up. | |In your home directory create a dir called extract | |cd to that dir | |assuming it is a tar.gz package simply do tar xvfz |../wherever/you/placed/the/file.tar.gz | |and it will extract and gzip -d the contents into a seperate directory |in the extract directory [at least if it was packaged in the nicq-x.y |way]. | |Now follow the instructions on how to compile it. Merely compiling it |won't damage your system, not `infect' it with crud. Only when you make |install it will you make modifications to the base system. | |Hope this helps to lower your `fear' of trying to compile things =) | |Kind regards, | |-- |Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl |The BSD Programmer's Documentation Project |Network/Security Specialist BSD: Technical excellence at its best |My name is Legion: for we are many. | | |To Unsubscribe: send mail to majordomo@FreeBSD.org |with "unsubscribe freebsd-questions" in the body of the message | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:44:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 49A241511D for ; Mon, 4 Oct 1999 06:44:00 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11Y8P4-000DIJ-00; Mon, 4 Oct 1999 14:43:46 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA08419; Mon, 4 Oct 1999 14:43:46 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 14:43:46 +0100 (BST) From: J McKitrick To: Jeroen Ruigrok/Asmodai Cc: freebsd-questions@freebsd.org Subject: Re: X server performance In-Reply-To: <19991004150300.X63946@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a Toshiba Satellite 4010 CDT. I wish i could have afforded a Dell. ;-) But the student loan worked out quite well ;-) I'm having sound problems, but that's it.. otherwise, i love it. jcm On Mon, 4 Oct 1999, Jeroen Ruigrok/Asmodai wrote: |On [19991004 04:18], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: |>Has anyone done and benchmarks or unofficial tests of Xservers for FreeBSD |>versus those for linux? I am trying to make sure that FreeBSD is really |>the best choice for my laptop workstation. | |Non-commercial we only have XFree for all I know. And I do not know of |any benchmarks that shows the difference between those two. | |On the commercial front we have two or three commercial vendors offering |X-servers. XiG is one which I know from the top of my head, I have no |clue who those others were again. | |But who know, mayhaps someone has done a test, I am curious about the |results though. | |What laptop is it btw? I have used a Dell Latitude CP with great |pleasure together with FreeBSD 3.x and XFree 3.3.3.1 and upwards. | |HTH, | |-- |Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl |The BSD Programmer's Documentation Project |Network/Security Specialist BSD: Technical excellence at its best |Take thy beak from out my heart and take thy form from off my door! | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:51:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 1F77C1511D for ; Mon, 4 Oct 1999 06:50:35 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11Y8VY-000Lv8-00; Mon, 4 Oct 1999 14:50:28 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA08482; Mon, 4 Oct 1999 14:50:27 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 14:50:27 +0100 (BST) From: J McKitrick To: Tony Cc: freebsd-questions@freebsd.org Subject: Re: GNOME: Does anyone use it? In-Reply-To: <99100408410801.37693@fdho-w5.fdnet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Well, from what i have heard, gnome has some great aspirations, but a lot of bugs right now. When my friend right-clicks before doing anything else, it crashes unfailingly. And i've had some very frustrating problems with it on linux. That's one of the reasons i switched to freeBSD/windowmaker... stability. jcm On Mon, 4 Oct 1999, Tony wrote: |I see many screenshots from the Linux community where people use this glorified |toolbar but from my experience, it's most reliable feature is creating .core |files. | |I've compiled and recompiled this port from the ground up several |different times over the past 9 months and I never can seem to find the |functionality of it. (recompiling the latest port dependancies, reinstalling |etc.) | |I load up a window-manager, start an xterm and type "panel" at which point I |get the main GNOME toolbar. If I try to configure it, it core dumps, if I do |most anything it core dumps. It never wants to switch away from enlightenment |being the default manager etc. | |My question is this: Are any people in the FreeBSD community using the GNOME |port happily? Did I skip a fundamental /home/userdir setup script? | |It's not important that I get it working, I just like to know why things aren't |working as they should. | |Tony | | |To Unsubscribe: send mail to majordomo@FreeBSD.org |with "unsubscribe freebsd-questions" in the body of the message | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 6:54:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dialin.care.lv (dialin.care.lv [159.148.46.20]) by hub.freebsd.org (Postfix) with ESMTP id 066C714C58 for ; Mon, 4 Oct 1999 06:53:56 -0700 (PDT) (envelope-from root2@puh.lv) Received: from shadow (valentin.care.lv [159.148.46.39]) by dialin.care.lv (8.9.3/8.9.3) with SMTP id QAA17328 for ; Mon, 4 Oct 1999 16:50:23 +0300 (EET DST) From: root2@puh.lv Message-ID: <008101bf0e78$88893120$272e949f@shadow.core.lv> To: Subject: Date: Mon, 4 Oct 1999 16:55:32 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Can anyone tell me how make bootable CD image under FreeBSD? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7: 3:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from maine.60north.net (maine.60north.net [198.143.201.10]) by hub.freebsd.org (Postfix) with ESMTP id 0A35114D61 for ; Mon, 4 Oct 1999 07:03:13 -0700 (PDT) (envelope-from ankzt@maine.60north.net) Received: from localhost (ankzt@localhost) by maine.60north.net (8.9.3/8.9.2) with ESMTP id KAA75585; Mon, 4 Oct 1999 10:02:57 -0400 (EDT) (envelope-from ankzt@maine.60north.net) Date: Mon, 4 Oct 1999 10:02:57 -0400 (EDT) From: Bill To: Yusuf Goolamabbas Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Would like to mix static IP's and non-routable IP's on a LAN In-Reply-To: <19991004081357.27746.qmail@yusufg.portal2.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Youll probabley need to describe your network in a bit more detail for a more exact solution to your question, for now ill assume your using your bsd box as a gateway with one ethernet card. Check out the man page for ifconfig, what you probabley want to do is alias the additional subnets. example: ifconfig ed1 alias 192.168.1.1 Im assuming you already have your nic config'd with public address, the netmask will default to whatever class address you enter, but if your going to subnet your unregistered networks (cant think of a siduation you would need to that for) do this... example: ifconfig ed1 alias 192.168.1.1 netmask 255.255.255.192 When your done you need to add the route to localhost.. route add 192.168.1.1 127.0.0.1 that should do it for you. On 4 Oct 1999, Yusuf Goolamabbas wrote: > Hi, I have a bunch of static IP's allocated to me (/26) network and I > would like to reclaim some static IP's and replace them with non > routable IP's (192.168.x.x). I read about NAT and tried to configure a > machine with NAT and make it be the gateway. > > All machines currently have a netmask of 255.255.255.192 and if I use > the 192.168.x.x address space. I get a netmask of 255.255.255.0. I am > not sure if this mismatch is allowed since the machines are on the > same segment > > Any suggestions on how I can do this ? > > Cheers, /Yusuf > -- > Yusuf Goolamabbas > yusufg@outblaze.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7: 6:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netgates.co.uk (macmail.netgates.co.uk [194.105.64.74]) by hub.freebsd.org (Postfix) with ESMTP id 2C79C14D61 for ; Mon, 4 Oct 1999 07:05:46 -0700 (PDT) (envelope-from didds@freenet.uk.com) Received: from freenet.uk.com (saul.netgates.co.uk [194.105.64.199]) by netgates.co.uk (8.7.5/8.x.x) with ESMTP id PAA12999 for ; Mon, 4 Oct 1999 15:05:38 +0100 (BST) Message-ID: <37F8B436.F76DF38B@freenet.uk.com> Date: Mon, 04 Oct 1999 15:05:42 +0100 From: Ian Diddams X-Mailer: Mozilla 4.51 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Subject: More sound blaster 16 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've a SB16 that works perfectly fine with Win98. However, under FBSD 3.2, it makes not a joty of sound, and the only clues I have are the KDE (as my windowmanager) midi-player complaining of "ERROR - Can't open Output Device". kernel config looks fine - controller snd0 device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 conflicts device pca0 at isa? port IO_TIMER1 tty dmesg output is fine - Oct 4 14:52:51 saul /kernel: sb0 at 0x220 irq 5 drq 1 on isa Oct 4 14:52:51 saul /kernel: snd0: Oct 4 14:52:51 saul /kernel: sbxvi0 at drq 5 on isa Oct 4 14:52:51 saul /kernel: snd0: Oct 4 14:52:51 saul /kernel: sbmidi0 at 0x330 on isa Oct 4 14:52:51 saul /kernel: snd0: Oct 4 14:52:51 saul /kernel: opl0 at 0x388 on isa Oct 4 14:52:51 saul /kernel: snd0: Any further ideas anybody? -- Didds To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:12:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 389AB14C96 for ; Mon, 4 Oct 1999 07:12:11 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC6D4E; Mon, 4 Oct 1999 16:12:08 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65302; Mon, 4 Oct 1999 15:46:20 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:46:20 +0200 From: Jeroen Ruigrok/Asmodai To: "Erik S. Carlsten" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Diamond Monster Sound MX300 Message-ID: <19991004154620.D63946@daemon.ninth-circle.org> References: <000101bf0e2f$07254cc0$b28280d0@bilbo> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <000101bf0e2f$07254cc0$b28280d0@bilbo> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 09:45], Erik S. Carlsten (ecarlste@cs.montana.edu) wrote: >Is it possible to configure a Kernel that can handle a Diamond Monster Sound >MX300 or will I have to buy a new ISA sound card to get it to work. If the >Monster will not work, what is the best card that FreeBSD's Kernel can >handle? Find out what chipsets are in use on that board, mail any results/findings back to us or try to find technical documentation for your card and kindly ask Cameron Grant if you could help him into getting this card supported within FreeBSD. Note that this will probably require that you run CURRENT to test his changes. If it's a PCI card be sure to do a pciconf -l as root. And with technical docs I mean those docs which actually detail the chips and registers and whatnot. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Any road leads to the end of the world. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:12:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 8118214D61 for ; Mon, 4 Oct 1999 07:12:13 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAF6D4E; Mon, 4 Oct 1999 16:12:10 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65315; Mon, 4 Oct 1999 15:51:40 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:51:40 +0200 From: Jeroen Ruigrok/Asmodai To: Yusuf Goolamabbas Cc: freebsd-questions@freebsd.org Subject: Re: Would like to mix static IP's and non-routable IP's on a LAN Message-ID: <19991004155140.E63946@daemon.ninth-circle.org> References: <19991004081357.27746.qmail@yusufg.portal2.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991004081357.27746.qmail@yusufg.portal2.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 10:36], Yusuf Goolamabbas (yusufg@outblaze.com) wrote: >Hi, I have a bunch of static IP's allocated to me (/26) network and I >would like to reclaim some static IP's and replace them with non >routable IP's (192.168.x.x). I read about NAT and tried to configure a >machine with NAT and make it be the gateway. > >All machines currently have a netmask of 255.255.255.192 and if I use >the 192.168.x.x address space. I get a netmask of 255.255.255.0. I am >not sure if this mismatch is allowed since the machines are on the >same segment I assume the gateway to be multihomed [having two NICs or more]. This would mean that the first NIC has an official address and the other NIC a local/free. Then you could simply follow the directions from natd(8) and create a working NAT set-up. I don't think the netmask should be of any influence to the NAT working. I have two interfaces, one fxp0 - the outgoing one, and ep0 the LAN-side. I use this for successful NAT. Note that I haven't added any more rules simply due to time restrictions ;) ipfw=/sbin/ipfw ${ipfw} -f flush ${ipfw} add 4000 divert natd all from any to any via fxp0 ${ipfw} add 65000 pass all from any to any HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best I know you have tried, to Feel... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:12:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 01EBA14DA4 for ; Mon, 4 Oct 1999 07:12:12 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAE6D4E; Mon, 4 Oct 1999 16:12:09 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id PAA65292; Mon, 4 Oct 1999 15:39:05 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 15:39:05 +0200 From: Jeroen Ruigrok/Asmodai To: Danny LaPrade Cc: freebsd-questions@FreeBSD.ORG Subject: Re: network with single Modem Message-ID: <19991004153905.C63946@daemon.ninth-circle.org> References: <37F8A55B.207F4CA@ipass.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F8A55B.207F4CA@ipass.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 15:11], Danny LaPrade (dsl@ipass.net) wrote: > >Situation: > Client Machine is RedHat, I will call machine C. > Server Machine is FreeBSD3.3, I will call machine S > C has default gateway set to S. > C and S have hosts file containing information about each other. > C can ping S and vice versus. > S can ping www.freebsd.org (it has auto dial modem configured). > And yes, when S dials modem it adds the IP given by ISP as default. > S machine has rc.conf w/ gateway_enable="YES" and >router_enable="YES" > >Question: > Why can't the C machine use S machine as gateway to the outside >world? > What am I missing? Simple. You need NAT. Basically the host you try to ping does not know the way back to your host C. To do that you need to network address translate between C and the outside world. Since the above tends to to believe you use ppp, you will be interested into the -nat (former -alias) flag to enable NAT with ppp. Also, natd(8) might be of interest/help to you. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best All art is but imitation of Nature... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:16: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 023A91540B for ; Mon, 4 Oct 1999 07:15:53 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA7420; Mon, 4 Oct 1999 16:15:50 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65578; Mon, 4 Oct 1999 16:15:52 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:15:52 +0200 From: Jeroen Ruigrok/Asmodai To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: Nicq for FreeBSD??? Message-ID: <19991004161552.J63946@daemon.ninth-circle.org> References: <19991004145022.U63946@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 16:12], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: >Thanks. Do you know if it works pretty well? Never even used it =) I use licq 0.61 IIRC and which serves me well untill someone with enough C++ experience can get 0.7x to work. Also, a minor nit, if you reply to a mail, even with broken mailers, could you please remove any unnecessary cruft? It's only a waste of bandwidth since nobody will read it anyways ;) Thanks and I hope you can get nicq to compile, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best I believe because it is Impossible... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:19:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fwm1.matra-ms2i.fr (fwm1.matra-ms2i.fr [195.46.202.129]) by hub.freebsd.org (Postfix) with ESMTP id E912515497 for ; Mon, 4 Oct 1999 07:19:12 -0700 (PDT) (envelope-from elemiere@matra-ms2i.fr) Received: by fwm1.matra-ms2i.fr; id SAA23104; Mon, 4 Oct 1999 18:27:15 +0200 (CEST) Received: from matms2i(10.0.0.3) by fwm1.matra-ms2i.fr via smap (4.0) id xma023074; Mon, 4 Oct 99 18:27:01 +0200 Received: from matra-ms2i.fr ([10.0.0.143]) by matms2i.matra-ms2i.fr (4.1/SMI-4.1(hp)) id AA26415; Mon, 4 Oct 99 15:11:45 +0100 Message-Id: <37F8B53E.97580EE1@matra-ms2i.fr> Date: Mon, 04 Oct 1999 16:10:06 +0200 From: Eric Lemiere Organization: Matra Systemes & Information X-Mailer: Mozilla 4.06 [fr] (WinNT; I) Mime-Version: 1.0 To: listserver@freebsd-fr.org, freebsd-questions@FreeBSD.ORG Subject: ISA card installation Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I'd wish to find information on how to install a new ISA card on my FreeBSD 3.2 station from A to Z (I've never done so before, and I cannot find much information in the handbook about this...) Of course, I've got the proper driver sources. So far, I've fancied that it could be something like: - Potentially adding a device-node with a 'sh MAKEDEV device-name' (but what is this name for ISA card #2?) - Then fill in the /sys/conf/files with required driver files is the following example line correct? 'MY_PATH/device_name_driv.c optional device_name device-driver' - Then alter the GENERIC file (or a copy of it) as to take the new device into account: 'device device_name' - Finally configure compile and install the new kernel with the well-known sequence: 'cd /usr/src/sys/i386/conf config MY_NEW_KERNEL cd ../../compile/MY_NEW_KERNEL make depend make make install' Would somebody tell me what to read or what to do more, and possibly correct theabove procedure? Thanks to you all! Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:24:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 8D2DA15044 for ; Mon, 4 Oct 1999 07:24:33 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA94F; Mon, 4 Oct 1999 16:24:27 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65635; Mon, 4 Oct 1999 16:24:45 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:24:45 +0200 From: Jeroen Ruigrok/Asmodai To: root2@puh.lv Cc: freebsd-questions@freebsd.org Subject: Re: your mail Message-ID: <19991004162445.M63946@daemon.ninth-circle.org> References: <008101bf0e78$88893120$272e949f@shadow.core.lv> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <008101bf0e78$88893120$272e949f@shadow.core.lv> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 16:12], root2@puh.lv (root2@puh.lv) wrote: >Can anyone tell me how make bootable CD image under FreeBSD? Install and try /usr/ports/sysutils/mkisofs I think that would help you a lot. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Things do not change, we change. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:24:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 237C015171 for ; Mon, 4 Oct 1999 07:24:35 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC94F; Mon, 4 Oct 1999 16:24:29 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65588; Mon, 4 Oct 1999 16:18:41 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:18:41 +0200 From: Jeroen Ruigrok/Asmodai To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: X server performance Message-ID: <19991004161841.K63946@daemon.ninth-circle.org> References: <19991004150300.X63946@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 16:12], J McKitrick (jcm@dogma.freebsd-uk.eu.org) wrote: >I have a Toshiba Satellite 4010 CDT. I wish i could have afforded a Dell. >I'm having sound problems, but that's it.. otherwise, i love it. Those sound problems might have been fixed in CURRENT. Any idea which chipset is in use? -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Man is the measure of all things. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:24:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 963731521B for ; Mon, 4 Oct 1999 07:24:34 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB94F; Mon, 4 Oct 1999 16:24:28 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65599; Mon, 4 Oct 1999 16:23:41 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:23:41 +0200 From: Jeroen Ruigrok/Asmodai To: Ian Diddams Cc: "freebsd-questions@freebsd.org" Subject: Re: More sound blaster 16 Message-ID: <19991004162341.L63946@daemon.ninth-circle.org> References: <37F8B436.F76DF38B@freenet.uk.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F8B436.F76DF38B@freenet.uk.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 16:13], Ian Diddams (didds@freenet.uk.com) wrote: >I've a SB16 that works perfectly fine with Win98. > >However, under FBSD 3.2, it makes not a joty of sound, and the only >clues I have are the KDE (as my windowmanager) midi-player complaining >of "ERROR - Can't open Output Device". You did: cd /dev ./MAKEDEV snd0 as root right? -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Time to kiss your ass goodbye, the end has just begun... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:26:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.portal2.com (ns1.portal2.com [203.85.226.193]) by hub.freebsd.org (Postfix) with SMTP id 52C2F15474 for ; Mon, 4 Oct 1999 07:26:39 -0700 (PDT) (envelope-from yusufg@outblaze.com) Received: (qmail 26376 invoked from network); 4 Oct 1999 14:25:26 -0000 Received: from yusufg.portal2.com (qmailr@203.85.226.249) by ns1.portal2.com with SMTP; 4 Oct 1999 14:25:26 -0000 Received: (qmail 3944 invoked by uid 500); 4 Oct 1999 14:26:33 -0000 Date: Mon, 4 Oct 1999 22:26:33 +0800 From: Yusuf Goolamabbas To: Bill Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Would like to mix static IP's and non-routable IP's on a LAN Message-ID: <19991004222633.A3845@outblaze.com> References: <19991004081357.27746.qmail@yusufg.portal2.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, The BSD box is currently being used as an internal routers (we have two WAN interfaces i.e pipes from two different ISP's and the BSD box which has two nics's allows us to get from one network to another) with appropiate settings in the ISP routers What I would like to do is somehow configure this box to act as a NAT box for various Windows boxen in the office. However, some people need static IP's. This BSD box has two NIC's. Each NIC is bound to the appropiate WAN interface (one is a /25 network and one is a /26 network) The Windows boxen are to be routed via the WAN interface on the /26 network fxp0 is bound to /25 network fxp1 is bound to /26 network Both have real routable IP addresses I configured the kernel with IPFIREWALL and IPDIVERT and made the appropiate changes in /etc/rc.conf natd_enable = "YES" natd_interface ="fxp0" Now, on my Windows boxen I am configuring them with network addresses 192.168.0.1 and gateway as the public address of fxp0 of the BSD box However, this isn't working since I can't ping out from the Windows boxen I have a feeling I am doing something incredibly stupid but I seem to be missing it The BSD boxen is 3.3-stable > Youll probabley need to describe your network in a bit more detail for a > more exact solution to your question, for now ill assume your using your > bsd box as a gateway with one ethernet card. Check out the man page for > ifconfig, what you probabley want to do is alias the additional subnets. > > example: ifconfig ed1 alias 192.168.1.1 > > Im assuming you already have your nic config'd with public address, the > netmask will default to whatever class address you enter, but if your going > to subnet your unregistered networks (cant think of a siduation you would > need to that for) do this... > > example: ifconfig ed1 alias 192.168.1.1 netmask 255.255.255.192 > > When your done you need to add the route to localhost.. > route add 192.168.1.1 127.0.0.1 > that should do it for you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:28:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 5302915157 for ; Mon, 4 Oct 1999 07:28:02 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11Y95r-000EG4-00; Mon, 4 Oct 1999 15:27:59 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id PAA08775; Mon, 4 Oct 1999 15:27:59 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 15:27:59 +0100 (BST) From: J McKitrick To: Jeroen Ruigrok/Asmodai Cc: freebsd-questions@freebsd.org Subject: Re: Nicq for FreeBSD??? In-Reply-To: <19991004161552.J63946@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Have you found it bggy? I find that many times it won't connect when kicq will. jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:31: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 6BEB5154BA for ; Mon, 4 Oct 1999 07:30:46 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11Y98S-000NiQ-00; Mon, 4 Oct 1999 15:30:40 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id PAA08814; Mon, 4 Oct 1999 15:30:40 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 15:30:40 +0100 (BST) From: J McKitrick To: Jeroen Ruigrok/Asmodai Cc: freebsd-questions@freebsd.org Subject: Re: X server performance In-Reply-To: <19991004161841.K63946@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG |Those sound problems might have been fixed in CURRENT. Any idea which |chipset is in use? Not sure. I have a manual... guess i should look it up. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:32:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id 66C03154A5 for ; Mon, 4 Oct 1999 07:32:26 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA5EE8; Mon, 4 Oct 1999 16:32:24 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65649; Mon, 4 Oct 1999 16:31:48 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:31:48 +0200 From: Jeroen Ruigrok/Asmodai To: Robert Blayzor Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-STABLE buildworld Message-ID: <19991004163148.N63946@daemon.ninth-circle.org> Reply-To: stable@freebsd.org References: <199910041331.JAA20354@nimbus.superior.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <199910041331.JAA20354@nimbus.superior.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 16:12], Robert Blayzor (robert@superior.net) wrote: >I'm having a problem buildworlding off the most recent 3.3-stable update. >On several machines, I'm getting this error and the buildworld dies: > >rm -f .depend /usr/obj/usr/src/secure/lib/libcrypt/GPATH /usr/obj/usr/src/secure/lib/libcrypt/GRTAGS /usr/obj/usr/src/secure/lib/libcrypt/GSYMS /usr/obj/usr/src/secure/lib/libcrypt/GTAGS >cc -O -pipe -I/usr/src/secure/lib/libcrypt/../../../lib/libmd -I/usr/src/secure/lib/libcrypt/../../../lib/libcrypt -DNONEXPORTABLE_CRYPT -DLIBC_SCCS -Wall -I/usr/obj/usr/src/tmp/usr/include -c /usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c -o crypt.o >/usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c: In function `crypt': >/usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c:62: warning: unused variable `j' >/usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c: At top level: >/usr/src/secure/lib/libcrypt/../../../lib/libcrypt/crypt.c:14: warning: `rcsid' defined but not used >make: don't know how to make crypt-md5.c. Stop The best forum to ask and report these kind of problems is freebsd-stable@freebsd.org I have the reply-to to stable. I have seen no reports on -stable which indicate this. You could have cvsup'd between commits. Could you wait a few hours, re-cvsup and try again? Also, rm -rf your whole /usr/obj [you will prolly need a chflags -R noschg as well]. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Those who cannot remember the past are condemned to repeat it. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:35:47 1999 Delivered-To: freebsd-questions@freebsd.org Received: from nets5.rz.rwth-aachen.de (nets5.rz.RWTH-Aachen.DE [137.226.144.13]) by hub.freebsd.org (Postfix) with ESMTP id DE97A1542B for ; Mon, 4 Oct 1999 07:35:31 -0700 (PDT) (envelope-from kuku@gilberto.physik.RWTH-Aachen.DE) Received: from campino.informatik.rwth-aachen.de (campino.Informatik.RWTH-Aachen.DE [137.226.116.240]) by nets5.rz.rwth-aachen.de (8.9.1a/8.9.1/7) with ESMTP id QAA11393; Mon, 4 Oct 1999 16:35:27 +0200 (MET DST) Received: from gil.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de [137.226.30.2]) by campino.informatik.rwth-aachen.de (8.9.1a/8.9.1/3) with ESMTP id QAA29700; Mon, 4 Oct 1999 16:35:27 +0200 (MET DST) Received: (from kuku@localhost) by gil.physik.rwth-aachen.de (8.9.2/8.6.9) id QAA61805; Mon, 4 Oct 1999 16:35:32 +0200 (CEST) Date: Mon, 4 Oct 1999 16:35:32 +0200 From: Christoph Kukulies To: Jeroen Ruigrok/Asmodai Cc: Christoph Kukulies , questions@freebsd.org Subject: Re: syslogd unknown priority name "" Message-ID: <19991004163532.A61717@gil.physik.rwth-aachen.de> References: <199910040940.LAA39225@gil.physik.rwth-aachen.de> <19991004150723.Z63946@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4us In-Reply-To: <19991004150723.Z63946@daemon.ninth-circle.org>; from Jeroen Ruigrok/Asmodai on Mon, Oct 04, 1999 at 03:07:23PM +0200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, Oct 04, 1999 at 03:07:23PM +0200, Jeroen Ruigrok/Asmodai wrote: > On [19991004 12:17], Christoph Kukulies (kuku@gilberto.physik.RWTH-Aachen.DE) wrote: > > > >3.2: > > > >I'm continously getting > > > > syslogd: unknown priority name "" > > syslogd: unknown priority name "" > > > >in my console log. > > Which programs are logged before or after those messages? It seems that the 'syslogd: unknown priority name "" ' doesn't appear in the log file. It only is on ttyv0 resp. xconsole. > > What daemons/programs are running when it logs that messages? [hint: ps > -ax] Difficult to say. What's special may be tcpwrapper (tcpd), procmail. > > Because I think some program is trying to issue a syslog() funtion but > it fills the first parameter of syslog(priority,...) wrongly and thus > you get a `unknown priority name'. I see. Sounds obvious. > > See syslog(3). > > HTH, > > -- > Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl > The BSD Programmer's Documentation Project > Network/Security Specialist BSD: Technical excellence at its best > United we stand, divided we fall. -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:38:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id F36E1154F6 for ; Mon, 4 Oct 1999 07:38:23 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11Y9Fs-000EQd-00; Mon, 4 Oct 1999 15:38:20 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id PAA08868 for ; Mon, 4 Oct 1999 15:38:19 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 15:38:19 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: color ls command Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG IS this available for FreeBSD? jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:40:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id 0612E154C8 for ; Mon, 4 Oct 1999 07:40:40 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA6CF7; Mon, 4 Oct 1999 16:40:38 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65673; Mon, 4 Oct 1999 16:41:03 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:41:03 +0200 From: Jeroen Ruigrok/Asmodai To: Ada Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing ssh (1 out of 1 hunks ignored) on 3.3 release Message-ID: <19991004164103.P63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 22:31], Ada (acheng@barrow.uwaterloo.ca) wrote: > Applying FreeBSD patches for ssh-1.2.27 >Ignoring previously applied (or reversed) patch. >1 out of 1 hunks ignored--saving rejects to config.h.in.rej This means that the patch in patches doesn't need to be applied since it already finds those changes in the file itself. I just looked at my ssh patches directory, but I am unable to find any patch to config.h whatsoever. Could you update your ports with cvsup and see if the problem still exists? Make sure you make clean in the port first though. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best In every stone sleeps a crystal... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:40:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id 09FB1154EE for ; Mon, 4 Oct 1999 07:40:41 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB6CF7; Mon, 4 Oct 1999 16:40:38 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65657; Mon, 4 Oct 1999 16:37:08 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:37:08 +0200 From: Jeroen Ruigrok/Asmodai To: Kent Stewart Cc: chris@tourneyland.com, freebsd-questions@FreeBSD.ORG Subject: Re: 3.3-Release - problem with PATH? Message-ID: <19991004163708.O63946@daemon.ninth-circle.org> References: <3.0.6.32.19991003122429.008dea80@mail.9netave.net> <37F7CCFF.D2B7DC70@3-cities.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F7CCFF.D2B7DC70@3-cities.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 23:46], Kent Stewart (kstewart@3-cities.com) wrote: >chris@tourneyland.com wrote: >> >> I just upgraded from 3.2 Release to 3.3 Release. No problems, except it >> seems that now my PATH variable is being ignored. My PATH is just fine, >> except trying to execute anything on the path (e.g. bash) gives me 'command >> not found'. Using the full path name works fine. >> >It is the kind of response you get when "." isn't in your path. I >personally don't have dot in my path and I have to run via ./program. From a security perspective that's the best thing to do. Using a . in your PATH makes you way less careful about running unknown programs. So I always recommend not putting a . in one's PATH. Seems most Linux people do indeed put the . in there. *sigh* -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Whispering winds in moonlit wood, a totem oak once golden stood... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:52:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id 1F31F14FF4 for ; Mon, 4 Oct 1999 07:52:05 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.47]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA93A; Mon, 4 Oct 1999 16:52:02 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id QAA65701; Mon, 4 Oct 1999 16:51:16 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 16:51:15 +0200 From: Jeroen Ruigrok/Asmodai To: slava revutchi Cc: freebsd-questions@freebsd.org Subject: Re: two device drivers with the same name (al0) Message-ID: <19991004165115.Q63946@daemon.ninth-circle.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991003 22:31], slava revutchi (sl@zeus.dnt.md) wrote: >I noticed in 3.3R GENERIC kernel a new divice supported: >device al0 # ADMtek AL981 (``Comet'') > >The thing is, I've been using an Aironet wireless isa card with >previous versions of FreeBSD and the driver I had, used the same >name: al0. In 3.2 for instance, to add support for the card I would >add a line like this: >i386/isa/if_al.c optional al device-driver > >What would I have to do in 3.3R to make it use the wireless card as >al0 driver and not the newly introduced one? Since I cannot guess who wrote your driver I can at least inform you of the following URL: http://www.freebsd.org/~wpaul/Aironet See if this driver is also for you. If not, bug the original author of your driver to change the name or send his changes to Bill Paul [if the author isn't Bill in the first place]. Bill uses an0 for Aironet and not al0. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Practice yourself what you preach. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 7:53:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cr343877-a.wlfdle1.on.wave.home.com (cr343877-a.wlfdle1.on.wave.home.com [24.112.75.79]) by hub.freebsd.org (Postfix) with ESMTP id 0C177154D3 for ; Mon, 4 Oct 1999 07:53:43 -0700 (PDT) (envelope-from bsdlist@cr343877-a.wlfdle1.on.wave.home.com) Received: from localhost (bsdlist@localhost) by cr343877-a.wlfdle1.on.wave.home.com (8.9.3/8.9.3) with ESMTP id LAA03982 for ; Mon, 4 Oct 1999 11:09:29 GMT (envelope-from bsdlist@cr343877-a.wlfdle1.on.wave.home.com) Date: Mon, 4 Oct 1999 11:09:29 +0000 (GMT) From: Edward Ing To: questions@freebsd.org Subject: Sun to Open Solaris Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I guess somebody is anxious to see what's under the hood. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8: 4:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chronis.pobox.com (chronis.pobox.com [208.210.124.49]) by hub.freebsd.org (Postfix) with ESMTP id 1329115601 for ; Mon, 4 Oct 1999 08:04:05 -0700 (PDT) (envelope-from scott@chronis.pobox.com) Received: by chronis.pobox.com (Postfix, from userid 1001) id 7C1099B8F; Mon, 4 Oct 1999 11:03:58 -0400 (EDT) Date: Mon, 4 Oct 1999 11:03:58 -0400 From: scott To: freebsd-questions@freebsd.org Subject: Re: color ls command Message-ID: <19991004110358.A39694@chronis.pobox.com> Mail-Followup-To: freebsd-questions@freebsd.org References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.7i In-Reply-To: X-Mailer: Mutt v2.03pl02 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG /usr/ports/misc/colorls /usr/ports/misc/gnuls scott On Mon, Oct 04, 1999 at 03:38:19PM +0100, J McKitrick wrote: > IS this available for FreeBSD? > > jcm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:18:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from s8-37-26.student.washington.edu (S8-37-26.student.washington.edu [128.208.37.26]) by hub.freebsd.org (Postfix) with ESMTP id F01D515830 for ; Mon, 4 Oct 1999 08:17:50 -0700 (PDT) (envelope-from jcwells@u.washington.edu) Received: from localhost (jcw@localhost) by s8-37-26.student.washington.edu (8.9.3/8.9.3) with ESMTP id UAA70343; Mon, 4 Oct 1999 20:17:19 GMT (envelope-from jcwells@u.washington.edu) X-Authentication-Warning: s8-37-26.student.washington.edu: jcw owned process doing -bs Date: Mon, 4 Oct 1999 20:17:19 +0000 (GMT) From: "Jason C. Wells" X-Sender: jcw@s8-37-26.student.washington.edu Reply-To: "Jason C. Wells" To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: color ls command In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, J McKitrick wrote: >IS this available for FreeBSD? Yes. Look in the ports. Thank You, | http://students.washington.edu/jcwells Jason Wells | "Those who would trade freedom for security deserve neither | freedom nor security." - Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:19:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from laurasia.com.au (lauras.lnk.telstra.net [139.130.93.142]) by hub.freebsd.org (Postfix) with ESMTP id 2D7B1154DF for ; Mon, 4 Oct 1999 08:19:11 -0700 (PDT) (envelope-from mike@laurasia.com.au) Received: (from mike@localhost) by laurasia.com.au (8.9.3/8.9.3) id XAA64631; Mon, 4 Oct 1999 23:17:10 +0800 (WST) (envelope-from mike) From: Michael Kennett Message-Id: <199910041517.XAA64631@laurasia.com.au> Subject: Re: color ls command In-Reply-To: from J McKitrick at "Oct 4, 1999 03:38:19 pm" To: jcm@dogma.freebsd-uk.eu.org (J McKitrick) Date: Mon, 4 Oct 1999 23:17:10 +0800 (WST) Cc: freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > IS this available for FreeBSD? > /usr/ports/misc/colorls* (BSD version), or /usr/ports/misc/gnuls* (GNU version). Mike Kennett (mike@laurasia.com.au) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:22:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id D5DCC1543D for ; Mon, 4 Oct 1999 08:22:24 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id IAA69314; Mon, 4 Oct 1999 08:22:22 -0700 (PDT) Message-ID: <37F8C62A.B54F705F@owp.csus.edu> Date: Mon, 04 Oct 1999 15:22:18 +0000 From: Joseph Scott X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: Dan Mahoney Cc: freebsd-questions@FreeBSD.ORG Subject: Re: "Top" shows large amount of "inact" RAM References: <199910021956.MAA21292@smtp.pe.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Dan Mahoney wrote: > > I have been watching the output of "top" on > my FreeBSD 3.2 system, and I was wondering > if anyone could help me undestand a little > better? > > 'top" currently shows 318 M active, 113 inactive, > 51 M wired, 13M cache, 8341 K buff, 2744K free > (this is on a dual-CPU system with 512 MB > phyiscal RAM). I also see 668K out of 512 M > of swap in use. Here's my confusion: > shouldn't the inactive RAM be getting cleared > out and reused, instead of starting to hit the > swap space? Or is my understanding of the > process unclear? Here's how I believe this works : The swap was probably used at one point where the system was actually under enough use it need to start swapping a little. That little bit is still in use because it's easier to have it in swap than having to go through the work of cleaning those pages, especially if that data may be needed again, and if there's no big push on the swap space anyway ( ie: not close to using all of it ). Same idea with the physical memory, it's cheaper to keep the dirty pages in memory until demand for physical memory grows and which time the dirty pages are cleared and whatever needs the memory now gets it. This is especially true if the data in those pages gets called again. I hope that makes sense, sometimes I have it clear in my head but it doesn't come out that way :-) -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:23:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from storm.FreeBSD.org.uk (storm.freebsd.org.uk [194.242.128.198]) by hub.freebsd.org (Postfix) with ESMTP id D02F71521A for ; Mon, 4 Oct 1999 08:23:05 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@localhost [127.0.0.1]) by storm.FreeBSD.org.uk (8.9.3/8.9.3) with ESMTP id QAA27176; Mon, 4 Oct 1999 16:22:54 +0100 (BST) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id QAA02813; Mon, 4 Oct 1999 16:23:30 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041523.QAA02813@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Richard Morte Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: pppctl configuration In-reply-to: Your message of "Tue, 28 Sep 1999 08:37:09 BST." <37F07024.9AC82224@sinclairassoc.force9.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 16:23:30 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Hi, > > I would like to be able to control ppp running in -auto mode by using > pppctl, but I cannot get it to work properly. > > The appropriate entries in ppp.conf appear to be: > > set server /var/run/internet "" 0177 # (taken from the FreeBSD Boook) > > or, with a password: > > set server /var/tmp/internet "MySecretPassWord 0177 There's a quote missing.... > to close the connection the following can be issued via a shell script: > > #!/bin/sh > exec pppctl /var/run/internet set timeout 300\;close > > But all I get is the message "Socket operation on non-socket". Any ideas > what else I need to do? Try ``ls -l /var/run/internet''. Do you mean /var/tmp/internet ? Is said file a named socket ? Did the ``set server'' command complain about anything ? > Cheers > > ric -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:26: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from storm.FreeBSD.org.uk (storm.freebsd.org.uk [194.242.128.198]) by hub.freebsd.org (Postfix) with ESMTP id E2D4B156AD for ; Mon, 4 Oct 1999 08:25:52 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@localhost [127.0.0.1]) by storm.FreeBSD.org.uk (8.9.3/8.9.3) with ESMTP id QAA27209; Mon, 4 Oct 1999 16:25:47 +0100 (BST) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id QAA02841; Mon, 4 Oct 1999 16:26:23 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041526.QAA02841@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: tbeaucha@gladstone.uoregon.edu Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ppp -auto is trigger-happy In-reply-to: Your message of "Tue, 28 Sep 1999 23:47:11 PDT." <19990928234711.C441@agent00ds.uoregon.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 16:26:23 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > On Wed, Sep 29, 1999 at 09:25:48AM +1200, Jonathan Chen wrote: > > On Tue, 28 Sep 1999, Richard Morte wrote: > > > > > Hi, > > > > > > Can anyone help explain why ppp in -auto -alias mode dials out as soon > > > as I click in the location field in Netscape? Do I need to set up IP > > > filtering? Without some sort of filtering or additional configuration I > > > don't seem to be able to browse documents on the local machine without > > > accessing the modem. > > > > Netscape does a DNS lookup the very first chance it gets. This will > > cause a dialout, unless you've blocked DNS from activating a callout. > > > I'm having the same problems. In fact, even starting the enlightenment config program causes ppp -auto to dial up. Same thing when sending mail from within mutt. Even though I have told sendmail to queue messages (sendmail -0 DeliveryMode=d -O HoldExpensive). Actually what it does is dial up, then stick them in the queue without delivering them. I assume that these are also caused because of DNS lookups. > > > So anyway, I'd really like to be disable DNS lookups from causing ppp -auto to dial. How can I do this? I assume that I want to re-enable DNS in ppp.linkup. > > Thanks a ton, > Tiller You may want to stick your hostname in /etc/hosts - blocking DNS is probably the wrong way to go as it'll make on-demand dialing practically useless. Look into ``ndc'' to find out what's being looked up and put this stuff in /etc/hosts if you can :-) -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:26: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id F13A2156C1 for ; Mon, 4 Oct 1999 08:26:03 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id IAA69323; Mon, 4 Oct 1999 08:24:44 -0700 (PDT) Message-ID: <37F8C6B8.D359F2E9@owp.csus.edu> Date: Mon, 04 Oct 1999 15:24:40 +0000 From: Joseph Scott X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: color ls command References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG J McKitrick wrote: > > IS this available for FreeBSD? > > jcm > There are two I believe, in the ports collection : colorls-2.2.7 An ls that can use color to display file attributes gnuls-4.0 GNU colorized `ls' I've never used either so I can't really comment on them, but they are there. -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:44:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail9.svr.pol.co.uk (mail9.svr.pol.co.uk [195.92.193.22]) by hub.freebsd.org (Postfix) with ESMTP id 293B215306 for ; Mon, 4 Oct 1999 08:44:19 -0700 (PDT) (envelope-from s.mitchell@computer.org) Received: from modem-76.maroon-clown.dialup.pol.co.uk ([62.137.44.76] helo=lungfish.freeserve.co.uk) by mail9.svr.pol.co.uk with esmtp (Exim 2.12 #2) id 11YAHf-0002yo-00; Mon, 4 Oct 1999 16:44:15 +0100 Received: from goatsucker.org (orac.goatsucker.org [192.168.1.2]) by lungfish.freeserve.co.uk (8.8.8/8.8.8) with ESMTP id QAA00271; Mon, 4 Oct 1999 16:43:04 +0100 (BST) (envelope-from scott) Received: (from scott@localhost) by goatsucker.org (8.9.2/8.9.3) id QAA00388; Mon, 4 Oct 1999 16:43:48 +0100 (BST) (envelope-from scott) Date: Mon, 4 Oct 1999 16:43:48 +0100 From: Scott Mitchell To: freebsd-questions@freebsd.org, freebsd-users@uk.freebsd.org Subject: HP printers & FreeBSD? Message-ID: <19991004164348.B360@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i X-Operating-System: FreeBSD 3.1-RELEASE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Having given in to my SO's nagging and decided to buy a new printer, my next task is to make sure it works with our favourite OS before handing over the cash... The printer in question will probably be from HP simply because I've never owned/used one that gave me any trouble, whereas the same cannot be said for certain others :-( Anyway, looking through the specs for the current crop of Deskjets, many of them apparently use something called 'Printing Performance Architecture' -- these also seem to be the models that don't even offer Mac support, so I assume the 'Printing Performance Architecture' is some kind of poxy WinPrinter thing that is best avoided. The rest of the range talks PCL Level 3 which I believe is fine for tools such as GhostScript et. al. Any confirmation that these are valid assumptions would be appreciated. Please cc: to me as I'm not subscribed to -questions these days. Many TIA, Scott -- =========================================================================== Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just Cambridge, England | 0x54B171B9 | like a dried up piece of roast goat" s.mitchell@computer.org | 0xAA775B8B | -- J. S. Bach. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:45: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id ED65115169 for ; Mon, 4 Oct 1999 08:45:00 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 25280 invoked from network); 4 Oct 1999 15:44:54 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.111.191) by cask.force9.net with SMTP; 4 Oct 1999 15:44:54 -0000 Message-ID: <37F8CB4C.26A3C6A0@sinclairassoc.force9.co.uk> Date: Mon, 04 Oct 1999 16:44:12 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: "K. Gunderson" Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: Need Advice on New PC for FreeBSD References: <37F7C2B0.A01DC28A@earthlink.net> <19991003204253.C7304@mark.iacan.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "K. Gunderson" wrote: > > On Sun, Oct 03, 1999 at 05:01:30PM -0400, Brad Chapman wrote: > > Hello; > > I am putting together a new computer from scratch to run FreeBSD and > > a database (MySQL) backed web server (under Apache). Although I am > > familiar with the FreeBSD OS and other stuff, I'm a newbie in terms of > > assembling computers. Does anyone have recommendations for components to > > build a good system? ie. if you could build your own computer, what > > would you put on it? Just trying to collect info and I would appreciate > > any advice anyone could give me. Thanks. > > I have built a few boxes from scratch and brought FreBSD up on. I've > sort of settled on a config that I like, here's the makeup of the last 4 > boxes: > > ABIT BX6r2 motherboard > Celeron 300a (overclocked to 450 MHz) > Micron PC100 ECC Ram (ouch! just got *really* expensive) > IBM Deskstar HD, 10.2 gig > Trident AGP graphics card, 4MB (I don't do xwindows) > Netgear 310 TX 10/100 NIC > > Now I know that somefolks have had trouble with the Netgear cards, but > they have worked well for me and are half the cost of the Intel cards. Yes, I too have just installed the Netgear FA310TX boards. FreeBSD is compatible with the revision D1 boards, but mine are revision D2 and work just fine. > Most of the boxes I build end up being servers and I don't bother with a > cd-rom drive. Same goes for modems. On the ones I do, I like the Toshiba > drives and USR/3Com (obviously stay away from Winmodems). I had real problems with an internal PCI Zoom modem so stay away from those. I exchanged it for an external 3com V90 modem; the latter works really well. Richard Morte > > Hope this helps you out some. > > -- > Ciao--Ken > http://www.y2know.org/safari > > Failure is not an option, it comes bundled with your Microsoft product. > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:45:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 5BA3F154D3 for ; Mon, 4 Oct 1999 08:45:30 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 25359 invoked from network); 4 Oct 1999 15:45:16 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.111.191) by cask.force9.net with SMTP; 4 Oct 1999 15:45:16 -0000 Message-ID: <37F8CB8E.6F5854DD@sinclairassoc.force9.co.uk> Date: Mon, 04 Oct 1999 16:45:18 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: Rishikesh Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: Couldn't open /usr/libexec/ld.so. References: <199910030131.VAA08187@math.mps.ohio-state.edu> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I had this problem too. I'ts well dociumented in the archives. Just run /stand/sysintall. Select option 5 - Post-install configuration of FreeBSD Select Distributions: Install additional distribution sets Select compat22 click OK and install Ric Rishikesh wrote: > > I just installed FreeBSD 3.2. I get the following message > when I try to run netscape (freebsd version). > > Couldn't open /usr/libexec/ld.so. > > What should I do? > Thank you. > > Rishi > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 8:51:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zephrey.methos.net (aquik.net [216.54.63.12]) by hub.freebsd.org (Postfix) with ESMTP id 380E614D3D for ; Mon, 4 Oct 1999 08:51:27 -0700 (PDT) (envelope-from dmaple@methos.net) Received: from localhost (dmaple@localhost) by zephrey.methos.net (8.9.3/8.9.3) with ESMTP id LAA95676 for ; Mon, 4 Oct 1999 11:52:00 -0400 (EDT) (envelope-from dmaple@methos.net) Date: Mon, 4 Oct 1999 11:52:00 -0400 (EDT) From: "David C. Maple" To: freebsd-questions@freebsd.org Subject: color ls command (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Yes, the port is under /usr/ports/misc/colorls. dmaple@methos.net 'The bigger it bloats, the harder it falls.' -- "The 48 Laws of Power" (R. Greene, J Elffers) ---------- Forwarded message ---------- Date: Mon, 4 Oct 1999 15:38:19 +0100 (BST) From: J McKitrick To: freebsd-questions@FreeBSD.ORG Subject: color ls command IS this available for FreeBSD? jcm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9: 2:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id EA47014CE5 for ; Mon, 4 Oct 1999 09:01:01 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id SAA39524; Mon, 4 Oct 1999 18:58:58 +0300 (EEST) (envelope-from ru) Date: Mon, 4 Oct 1999 18:58:58 +0300 From: Ruslan Ermilov To: root2@puh.lv Cc: freebsd-questions@FreeBSD.ORG Subject: Re: how to make bootable CD image under FreeBSD? Message-ID: <19991004185858.B37582@relay.ucb.crimea.ua> Mail-Followup-To: root2@puh.lv, freebsd-questions@FreeBSD.ORG References: <008101bf0e78$88893120$272e949f@shadow.core.lv> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <008101bf0e78$88893120$272e949f@shadow.core.lv>; from root2@puh.lv on Mon, Oct 04, 1999 at 04:55:32PM +0200 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, Oct 04, 1999 at 04:55:32PM +0200, root2@puh.lv wrote: > Can anyone tell me how make bootable CD image under FreeBSD? > Take a look at ports/sysutils/mkisofs and ports/sysutils/mkhybrid. Read manpages. Then take a look into /usr/share/examples/worm/. Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9:10:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from squeaky.noc.gate.net (squeaky.noc.gate.net [199.227.124.91]) by hub.freebsd.org (Postfix) with ESMTP id CEE1015172 for ; Mon, 4 Oct 1999 09:10:48 -0700 (PDT) (envelope-from jasonv@squeaky.noc.gate.net) Received: (from jasonv@localhost) by squeaky.noc.gate.net (8.9.3/8.9.3) id MAA09369; Mon, 4 Oct 1999 12:10:52 -0400 (EDT) (envelope-from jasonv) Message-Id: <199910041610.MAA09369@squeaky.noc.gate.net> Date: Mon, 4 Oct 1999 12:10:51 -0400 (EDT) From: Jason Subject: Re: More sound blaster 16 To: didds@freenet.uk.com Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <37F8B436.F76DF38B@freenet.uk.com> MIME-Version: 1.0 Content-Type: TEXT/plain; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 4 Oct, Ian Diddams wrote: > I've a SB16 that works perfectly fine with Win98. > > However, under FBSD 3.2, it makes not a joty of sound, and the only > clues I have are the KDE (as my windowmanager) midi-player complaining > of "ERROR - Can't open Output Device". > > kernel config looks fine - > > controller snd0 > device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 > device opl0 at isa? port 0x388 conflicts > device pca0 at isa? port IO_TIMER1 tty > > > > dmesg output is fine - > > Oct 4 14:52:51 saul /kernel: sb0 at 0x220 irq 5 drq 1 on isa > Oct 4 14:52:51 saul /kernel: snd0: > Oct 4 14:52:51 saul /kernel: sbxvi0 at drq 5 on isa > Oct 4 14:52:51 saul /kernel: snd0: > Oct 4 14:52:51 saul /kernel: sbmidi0 at 0x330 on isa > Oct 4 14:52:51 saul /kernel: snd0: > Oct 4 14:52:51 saul /kernel: opl0 at 0x388 on isa > Oct 4 14:52:51 saul /kernel: snd0: > > > Any further ideas anybody? > > > Did you go into the dev directory and type ./MAKEDEV snd0? Squeaky To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9:20: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id 770C015220 for ; Mon, 4 Oct 1999 09:19:51 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.251]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id LAA94709; Mon, 4 Oct 1999 11:18:33 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <02d401bf0e84$23f20a00$fba3f9cf@megared.net.mx> Reply-To: "Alejandro Ramirez" From: "Alejandro Ramirez" To: , References: <99100215503900.00367@freebsd.cybcon.com> Subject: RE: Weird network problem..... Date: Mon, 4 Oct 1999 11:18:48 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Maybe an "ifconfig de0 down" & "ifconfig de0 up" in your system 1, will be enough. Have Fun... Ales > This is kinda weird and I hop you could help me with it: > > System 1: > Freebsd 3.3-Stable on an Dual PPro 200 with 128meg ram > Kingston Ether card (de0) > > System #2: > DEC Alpha Alphastation 200 4/233 80meg ram > Built in NIC (de0) > > I have these two system networked with a crosover cable. The weird thing is If > I reboot system #1, it reconnects itself to system #2 with no problem, but If I > reboot system #2 (The Alpha), it does NOT reconnect and I cant ping system #1 > untill I reboot system #1.... > > any idea what gives here? > > -- > William Woods > FreeBSD 3.3-Stable > > -----BEGIN GEEK CODE BLOCK----- > Version: 3.1 > GIT d++ s+:+ a C+++ UB+++ P+ L++ E- W++ N+ o+ K- w > O- M-- V PS-- PE++ Y+ PGP t+ 5+ X R- tv- b++ DI+ D > G e++ h---- r+++ y++++ > ------END GEEK CODE BLOCK------ > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9:29:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zagnut.hotpop.com (zagnut.hotpop.com [204.57.55.32]) by hub.freebsd.org (Postfix) with ESMTP id D3D5115230 for ; Mon, 4 Oct 1999 09:29:51 -0700 (PDT) (envelope-from ert@hotpop.com) Received: from superonline (unknown [212.252.148.100]) by zagnut.hotpop.com (Postfix) with SMTP id 094BD639D3; Mon, 04 Oct 1999 12:29:35 -0400 (EDT) Message-ID: <007401bf0e85$48dc4e60$14000080@com> From: "Ertan Kucukoglu" To: "J McKitrick" Cc: "FreeBSD" References: Subject: Re: color ls command Date: Mon, 4 Oct 1999 19:26:40 +0300 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > IS this available for FreeBSD? > > jcm > Hello, Try ls -G. -- Ertan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9:45:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 3BAFE15149 for ; Mon, 4 Oct 1999 09:45:24 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YBEp-000H3v-00; Mon, 4 Oct 1999 17:45:23 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id RAA10250 for ; Mon, 4 Oct 1999 17:45:23 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 17:45:23 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: saving space on laptop HD... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I was just checking my free disk space, and i see that my /usr slice is 49% full. And i don't really ave that much software installed. I have a 2 gig partition and used the standard setup for mount points. That means that out of 1.87 gig, i only have about half left. Now maybe i have all i need, but i may need to install star office or something else large like that. Is there a way t whittle some usage away in this directory? The only think i was thinking was deleteing unwated ports, but i don't want to do something i cannot reverse later. Is there a better way? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9:54:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [194.242.128.25]) by hub.freebsd.org (Postfix) with ESMTP id C97AC15149 for ; Mon, 4 Oct 1999 09:54:12 -0700 (PDT) (envelope-from joe@florence.pavilion.net) Received: (from joe@localhost) by florence.pavilion.net (8.9.3/8.8.8) id RAA19152; Mon, 4 Oct 1999 17:54:03 +0100 (BST) (envelope-from joe) Date: Mon, 4 Oct 1999 17:54:01 +0100 From: Josef Karthauser To: Scott Mitchell Cc: freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? Message-ID: <19991004175400.C94096@florence.pavilion.net> References: <19991004164348.B360@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991004164348.B360@lungfish.freeserve.co.uk> X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, 24 The Old Steine, Brighton, BN1 1EL, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Buy one with postscript and a jet direct engine if possible. You'll be able to speak directly to it on your ethernet then :). If it doesn't come with postscript then Ghostscript can do PS -> PJL, and I do that on my one laserjet 4L at home. If it doesn't had a jetdirect you can always plug it into the freebsd box's printer port :) Joe On Mon, Oct 04, 1999 at 04:43:48PM +0100, Scott Mitchell wrote: > Having given in to my SO's nagging and decided to buy a new printer, my > next task is to make sure it works with our favourite OS before handing > over the cash... The printer in question will probably be from HP simply > because I've never owned/used one that gave me any trouble, whereas the > same cannot be said for certain others :-( Anyway, looking through the > specs for the current crop of Deskjets, many of them apparently use > something called 'Printing Performance Architecture' -- these also seem to > be the models that don't even offer Mac support, so I assume the 'Printing > Performance Architecture' is some kind of poxy WinPrinter thing that is > best avoided. The rest of the range talks PCL Level 3 which I believe is > fine for tools such as GhostScript et. al. > > Any confirmation that these are valid assumptions would be appreciated. > Please cc: to me as I'm not subscribed to -questions these days. > > Many TIA, > > Scott > > -- > =========================================================================== > Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just > Cambridge, England | 0x54B171B9 | like a dried up piece of roast goat" > s.mitchell@computer.org | 0xAA775B8B | -- J. S. Bach. > > > ------ FreeBSD UK User's Group - Mailing List ------ > http://listserver.uk.freebsd.org/mailman/listinfo/freebsd-users -- Josef Karthauser FreeBSD: How many times have you booted today? Technical Manager Viagra for your server (http://www.uk.freebsd.org) Pavilion Internet plc. [joe@pavilion.net, joe@uk.freebsd.org, joe@tao.org.uk] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 9:56:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from imo22.mx.aol.com (imo22.mx.aol.com [198.81.17.66]) by hub.freebsd.org (Postfix) with ESMTP id 5F7FC1534C for ; Mon, 4 Oct 1999 09:56:34 -0700 (PDT) (envelope-from Wktinteman@aol.com) Received: from Wktinteman@aol.com by imo22.mx.aol.com (mail_out_v22.4.) id nQYWa19901 (3868) for ; Mon, 4 Oct 1999 12:56:21 -0400 (EDT) From: Wktinteman@aol.com Message-ID: <21fead9f.252a3634@aol.com> Date: Mon, 4 Oct 1999 12:56:20 EDT Subject: Installation problems with FreeBSD Toolkit CD set of May 1999 To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: AOL 4.0.i for Windows 95 sub 41 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Some days ago I bought your above mentioned Toolkit set on 6 CDs. CD no. 1 contains at least 2 releases of FreeBSD : 3.1-199903327-STABLE ( which I can't install as I have a Tekram 390F SCSI controller >-(( ) and 2.2-19990328-STABLE which is 2.2.8. When I boot with floppies I can go ahead till I want to install the selected parts of the distribution from CDROM. Then I get an error message which tells that 3.1-199903327-STABLE is the current version and that I have the wrong floppies or what else. The CD is mounted on /dist. I am told to go to the option menu and make appropriate changes. There I find 2.2-19990328-STABLE which is correct/what I want to do. I do not dare to change this ( or should I ? ). I found a file named CDROM on the CD where is a line setting cd-version equal to 3.1-199903327-STABLE. Is there any way to circumvent this error/message ? Let me add that I could install a 2.5.1 system an try to upgrade from there to 3.1-199903327-STABLE - but i don't know how and whether this makes any sense. By the way I browsed through /www/Handbook and found many 0K-files ( especially on Linux-emulation to run the ADABAS D 11.0 database ) Please don't offer to send the CDs back as I'm situated in Germany. Best regards, W. Tintemann Kastanienweg 5 D-69221 Dossenheim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10: 4:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from copland.udel.edu (copland.udel.edu [128.175.13.92]) by hub.freebsd.org (Postfix) with ESMTP id 1EF06153D1 for ; Mon, 4 Oct 1999 10:04:23 -0700 (PDT) (envelope-from papalia@UDel.Edu) Received: from morgaine.avalon.com (host75-157.student.udel.edu [128.175.75.157]) by copland.udel.edu (8.9.3/8.9.3) with SMTP id NAA07710; Mon, 4 Oct 1999 13:00:47 -0400 (EDT) Message-Id: <4.1.19991004125319.009628d0@unix01.voicenet.com> X-Sender: papalia@mail.udel.edu X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Mon, 04 Oct 1999 12:58:11 -0400 To: J McKitrick , freebsd-questions@FreeBSD.ORG From: John Subject: Re: saving space on laptop HD... In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Not sure if you already tried this or not, but something that helped me drop off a good amount of unneeded files was to cd /usr and then "make clean". Found out thru the list too that when building ports, it's a lot more effective to "make install clean" or "make install && make clean". That way you never forget to clean up the ./work directories. Hope that helps you out. --john At 05:45 PM 10/4/99 +0100, J McKitrick wrote: >I was just checking my free disk space, and i see that my /usr slice is >49% full. And i don't really ave that much software installed. I have a >2 gig partition and used the standard setup for mount points. That means >that out of 1.87 gig, i only have about half left. Now maybe i have all i >need, but i may need to install star office or something else large like >that. Is there a way t whittle some usage away in this directory? The >only think i was thinking was deleteing unwated ports, but i don't want to >do something i cannot reverse later. Is there a better way? > > >-jm > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10: 6:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id A226E154A1 for ; Mon, 4 Oct 1999 10:06:26 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id MAA00312; Mon, 4 Oct 1999 12:57:24 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Mon, 4 Oct 1999 12:57:23 -0400 (EDT) From: Alex V P To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem installing PHP + MySQL In-Reply-To: <3.0.6.32.19991004020841.008a0b60@mail.9netave.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG pico is in the ports under mail, comes together with pine. have fun alex On Mon, 4 Oct 1999 chris@tourneyland.com wrote: > >I don't know if my approach is right , but this is what I did. > >install mysql and start server and follow the attachement file ;-). > >in any case, next time cc: mailing list because tomorrow someone else > might need > >help on the same subject ;-). let me know if it works ;-). > > Success! PHP recognizes MySQL. Yee haw!!!!!! > > I'm not 100% satisfied with the way things are, mostly because the source > install of apache created a completely different directory structure and > naming scheme than the ports install, and I think I liked the ports install > better. For example, the ports install calls the actual binary 'apache' > (and the config file 'apache.conf') instead of 'httpd' (and 'httpd.conf'), > presumably acknowledging that there are more web servers out there than > apache. I liked this better. Also, the config file from the ports install > has more stuff in it. Also, somehow durin my BSD reinstall, I lost pico ... > and it's not in the ports collection! > > I guess my point it, I'm gonna maybe try a few more combinations, and maybe > learn *why* your approach works better, and maybe even streamline it a bit > (if possible). When I do that I'll cc the list, which was an excellent > suggestion by you. > > Thanks so much Alex! You saved the day. May you receive a nice dose of > Mailing List Karma (or at least a lovely fruit basket)! > > - Chris > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10: 8: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 3EB9F15474 for ; Mon, 4 Oct 1999 10:08:00 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YBaQ-0001N1-00; Mon, 04 Oct 1999 19:07:42 +0200 From: Sheldon Hearn To: John Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: saving space on laptop HD... In-reply-to: Your message of "Mon, 04 Oct 1999 12:58:11 -0400." <4.1.19991004125319.009628d0@unix01.voicenet.com> Date: Mon, 04 Oct 1999 19:07:42 +0200 Message-ID: <5270.939056862@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 04 Oct 1999 12:58:11 -0400, John wrote: > Not sure if you already tried this or not, but something that helped me > drop off a good amount of unneeded files was to cd /usr and then "make > clean". I think John meant "cd /usr/ports". :-) If you've ever done a ``make world'', the same might apply to /usr/src. Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:10: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fedde.littleton.co.us (fedde.littleton.co.us [216.17.174.44]) by hub.freebsd.org (Postfix) with ESMTP id 9FF52154DB for ; Mon, 4 Oct 1999 10:09:53 -0700 (PDT) (envelope-from cfedde@fedde.littleton.co.us) Received: from fedde.littleton.co.us (localhost.fedde.littleton.co.us [127.0.0.1]) by fedde.littleton.co.us (8.9.3/8.9.3) with ESMTP id LAA24783; Mon, 4 Oct 1999 11:08:34 -0600 (MDT) Message-Id: <199910041708.LAA24783@fedde.littleton.co.us> To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG From: Chris Fedde Subject: Re: saving space on laptop HD... In-reply-to: Your message of "Mon, 04 Oct 1999 17:45:23 BST." Date: Mon, 04 Oct 1999 11:08:34 -0600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG J McKitrick writes: +--------------- | I was just checking my free disk space, and i see that my /usr slice is | 49% full. And i don't really ave that much software installed. I have a | 2 gig partition and used the standard setup for mount points. That means | that out of 1.87 gig, i only have about half left. Now maybe i have all i | need, but i may need to install star office or something else large like | that. Is there a way t whittle some usage away in this directory? The | only think i was thinking was deleteing unwated ports, but i don't want to | do something i cannot reverse later. Is there a better way? | | -jm +--------------- You can drop the work subdirectories in /usr/ports. they are not used after the make install succeeds. And they will be re-build if something need them. On my box /usr/ports and /usr/src are symlinks to amd mounted NFS volumes on my desk top. When I'm on the road these are unavailable but that is not usually a problem. My next step is to figure out how to do this all with CODA. chris __ Chris Fedde 303 773 9134 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:13: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gfc-mad-proxy.gflesch.com (gfc-mad-proxy.gflesch.com [208.212.82.194]) by hub.freebsd.org (Postfix) with ESMTP id 4D12F153F1 for ; Mon, 4 Oct 1999 10:13:03 -0700 (PDT) (envelope-from kwills@gflesch.com) Received: from gfc-mad-mail.gflesch.com (gfc-mad-mail.gflesch.int [10.1.1.25]) by gfc-mad-proxy.gflesch.com (8.9.2/8.9.1) with ESMTP id MAA47280; Mon, 4 Oct 1999 12:03:31 -0500 (CDT) (envelope-from kwills@gflesch.com) Received: by gfc-mad-mail.gflesch.int with Internet Mail Service (5.5.2448.0) id ; Mon, 4 Oct 1999 12:11:07 -0500 Message-ID: <058BE165CBA8D111A82E0008C79F9E35024844@gfc-mad-dc.gflesch.int> From: "Wills, Ken" To: Sheldon Hearn , John Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: RE: saving space on laptop HD... Date: Mon, 4 Oct 1999 12:11:11 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Sheldon Hearn > Sent: Monday, October 04, 1999 12:08 PM > To: John > Cc: J McKitrick; freebsd-questions@FreeBSD.ORG > Subject: Re: saving space on laptop HD... > > I think John meant "cd /usr/ports". :-) > > If you've ever done a ``make world'', the same might apply to > /usr/src. Also take a look in /usr/ports/distfiles for old tarballs that you don't need anymore. Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:15:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from copland.udel.edu (copland.udel.edu [128.175.13.92]) by hub.freebsd.org (Postfix) with ESMTP id 70FC814BFD for ; Mon, 4 Oct 1999 10:15:41 -0700 (PDT) (envelope-from papalia@UDel.Edu) Received: from morgaine.avalon.com (host75-157.student.udel.edu [128.175.75.157]) by copland.udel.edu (8.9.3/8.9.3) with SMTP id NAA29458; Mon, 4 Oct 1999 13:12:03 -0400 (EDT) Message-Id: <4.1.19991004130848.0095e4b0@unix01.voicenet.com> X-Sender: papalia@mail.udel.edu X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Mon, 04 Oct 1999 13:09:29 -0400 To: Sheldon Hearn From: John Subject: Re: saving space on laptop HD... Cc: J McKitrick , freebsd-questions@FreeBSD.ORG In-Reply-To: <5270.939056862@axl.noc.iafrica.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >> Not sure if you already tried this or not, but something that helped me >> drop off a good amount of unneeded files was to cd /usr and then "make >> clean". > >I think John meant "cd /usr/ports". :-) > >If you've ever done a ``make world'', the same might apply to /usr/src. Actually, both. The reason cd /usr works on a make clean i guess is cuz I've rebuilt the world about 6 or 8 times in the past 2 months.... what can I say... I must be a masochist... :) --John To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:15:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 3814814BFD for ; Mon, 4 Oct 1999 10:15:50 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YBi8-0001RO-00; Mon, 04 Oct 1999 19:15:40 +0200 From: Sheldon Hearn To: John Cc: freebsd-questions@FreeBSD.ORG Subject: Re: saving space on laptop HD... In-reply-to: Your message of "Mon, 04 Oct 1999 13:09:29 -0400." <4.1.19991004130848.0095e4b0@unix01.voicenet.com> Date: Mon, 04 Oct 1999 19:15:40 +0200 Message-ID: <5541.939057340@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 04 Oct 1999 13:09:29 -0400, John wrote: > Actually, both. The reason cd /usr works on a make clean i guess is cuz > I've rebuilt the world about 6 or 8 times in the past 2 months.... what can > I say... I must be a masochist... :) If something interesting happens when you cd /usr and make clean, you've done something odd to your system. /usr isn't usually populated with a Makefile. Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:18:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from copland.udel.edu (copland.udel.edu [128.175.13.92]) by hub.freebsd.org (Postfix) with ESMTP id C89D2154A7 for ; Mon, 4 Oct 1999 10:18:47 -0700 (PDT) (envelope-from papalia@UDel.Edu) Received: from morgaine.avalon.com (host75-157.student.udel.edu [128.175.75.157]) by copland.udel.edu (8.9.3/8.9.3) with SMTP id NAA13478; Mon, 4 Oct 1999 13:18:50 -0400 (EDT) Message-Id: <4.1.19991004131550.0094ab20@unix01.voicenet.com> X-Sender: papalia@mail.udel.edu X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Mon, 04 Oct 1999 13:16:20 -0400 To: Sheldon Hearn From: John Subject: Re: saving space on laptop HD... Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <5541.939057340@axl.noc.iafrica.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >> Actually, both. The reason cd /usr works on a make clean i guess is cuz >> I've rebuilt the world about 6 or 8 times in the past 2 months.... what can >> I say... I must be a masochist... :) > >If something interesting happens when you cd /usr and make clean, you've >done something odd to your system. /usr isn't usually populated with a >Makefile. Oops..... make that /usr/src..... that's what I get for working from memory :) Sorry about that!!! --John To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:26:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id C49DF154C3 for ; Mon, 4 Oct 1999 10:26:06 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id NAA03610; Mon, 4 Oct 1999 13:24:38 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Mon, 4 Oct 1999 13:24:37 -0400 (EDT) From: Brett Taylor To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: color ls command In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Mon, 4 Oct 1999, J McKitrick wrote: > IS this available for FreeBSD? peloton: {2} cd /usr/ports/ peloton: {3} make search key=colorls Port: colorls-2.2.7 Path: /usr/ports/misc/colorls Info: An ls that can use color to display file attributes Maint: asami@FreeBSD.org Index: misc B-deps: R-deps: Brett ***************************************************** Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:33:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id B97C614CA3 for ; Mon, 4 Oct 1999 10:33:52 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA06587; Mon, 4 Oct 1999 10:52:24 -0700 (PDT) Date: Mon, 4 Oct 1999 10:52:24 -0700 (PDT) From: Alfred Perlstein To: "Per D. Jensen" Cc: questions@FreeBSD.ORG Subject: Re: Very Newbie Q In-Reply-To: <57F1FE754246D211A98700805FB79145F658B4@aarhus> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Per D. Jensen wrote: > Hi all! > > I've just subscribed to the FreeBSD mailingslist and my first question is: > > Is it feasible to install FreeBSD via a 56K modem? How many Megs do I > have to download to get a system running? Lets say without X for starters; > just a mininal BSD UNIX system. I've done this before, it's not _too_ bad, just when doing the install pick the 'minimal package' to install, once you have that installed you can add more packages later by running /stand/sysinstall. Good luck, -Alfred > > JFYI: I'm not new to UNIX, as I've been using Linux for a year or so at home > and uses AIX and Solaris (onb a user level) at work. > > Thanks! > > -- > Per Dalum Jensen - 5506 > "The real University is a state of Mind" > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:36:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from nohow.demon.co.uk (nohow.demon.co.uk [212.228.18.189]) by hub.freebsd.org (Postfix) with ESMTP id C5F7E14D9E for ; Mon, 4 Oct 1999 10:36:06 -0700 (PDT) (envelope-from noway@nohow.demon.co.uk) Received: from localhost (noway@localhost) by nohow.demon.co.uk (8.9.3/8.9.3) with ESMTP id SAA01030; Mon, 4 Oct 1999 18:35:11 +0100 (BST) (envelope-from noway@nohow.demon.co.uk) Date: Mon, 4 Oct 1999 18:35:10 +0100 (BST) From: Jose Marques To: Scott Mitchell Cc: freebsd-questions@freebsd.org, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? In-Reply-To: <19991004164348.B360@lungfish.freeserve.co.uk> Message-ID: X-No-Archive: yes MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Scott Mitchell wrote: > Any confirmation that these are valid assumptions would be appreciated. > Please cc: to me as I'm not subscribed to -questions these days. Check to see if the printer supports DOS - if it does then it should work with FreeBSD (the print/apsfilter port will help if the printer doesn't support postscript). I use an HP LaserJet 2100M myself. -- Jose Marques To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 10:46: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sasknow.com (h139-142-245-96.ss.FiberONE.NET [139.142.245.96]) by hub.freebsd.org (Postfix) with ESMTP id 8FA2F14BF5 for ; Mon, 4 Oct 1999 10:46:00 -0700 (PDT) (envelope-from freebsd@sasknow.com) Received: from sasknow.com (ntstn [10.0.0.2]) by sasknow.com (8.9.3/8.9.3) with ESMTP id LAA09680; Mon, 4 Oct 1999 11:45:55 -0600 (CST) (envelope-from freebsd@sasknow.com) Message-ID: <37F8E80E.BDF497B2@sasknow.com> Date: Mon, 04 Oct 1999 11:46:54 -0600 From: "Ryan Thompson [FreeBSD]" X-Mailer: Mozilla 4.7 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: trouble@hackfurby.com Cc: freebsd-questions@freebsd.org Subject: Re: ~/bin, ~/etc for chroot'd users References: <37F840FA.5DB1D3A7@hackfurby.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG TrouBle wrote: > > ummmm are you chrooting every user and creating them their own bin/etc > dirs ??? i think i might have a sweet solution for you! > Great! Would you care to let the list in on this sweet solution of yours? :-b - Ryan > Ryan Thompson wrote: > > > > Hi everybody; > > > > I'm just wondering what the best practice is for the content in the bin/ > > and etc/ directories in home directories of users for which chroot is run. > > (Both through ftpd, and just regular login shells). Users come and go on > > my system with some frequency, and I have a fair number of them. What is > > the best way to maintain the content in the etc/ directories of users for > > which chroot is run? (In particular, the pwd.db and groups files, as well > > as *motd (which change from time to time)). > > > > Is there a standardized script that I can use with pwd_mkdb to auto > > install these files into all users' home directories? Or, am I on my own > > to hack something together to suit my tastes? > > > > Thanks for any input! > > > > - Ryan > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11: 2:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id 5DE8F1553C for ; Mon, 4 Oct 1999 11:02:27 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id WAA12348; Mon, 4 Oct 1999 22:54:30 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id XAA00793; Mon, 4 Oct 1999 23:15:05 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id XAA00851; Mon, 4 Oct 1999 23:10:53 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Mon, 4 Oct 1999 23:10:50 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Kent Stewart Cc: Jonathan Chen , Richard Morte , freebsd-questions@FreeBSD.ORG Subject: Re: Printing FROM FreeBsd to Windows In-Reply-To: <37F7CF71.F24A5EFB@3-cities.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Sun, 3 Oct 1999, Kent Stewart wrote: > > Have you ever tried adding the Unix services for NT so that you don't > have to use Samba. I have always thought that netbeui was the dark ^^^^^^^ If you want to print "From FreeBSD to Windoze", make sure you have no NetBEUI installed. Microsoft Network uses NetBIOS which is high level protocol and it's not the same as NetBEUI. NetBEUI is transport protocol (aka Plug-n-Play protocol, it has NO tunable parameters (such as IP address)). Microsoft Network can use NetBIOS on top of TCP/IP (ports 137,138,139). MAKE sure, you have NO NetBEUI installed. > side of windows and I don't understand people using that when they can > download NFS and LPD for NT. If your systems are Win 9x based it is a > different matter. Regards, Ilia Chipitsine -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/jfnORxlWKN2EXhAQH7FAMA5F6QmHaixiYGxCcCFB10TzGUBPs8F1Yr dG4pr8x8Iigp+WeKju9J/dRCP4Xk4jHJ2TcRCG1T3oDiSw2nVuHdydn2FgeQVgqv EpUmFF1RxxrsciNX3xHz07YShgXl3IDn =wH7O -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11: 4:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gfc-mad-proxy.gflesch.com (gfc-mad-proxy.gflesch.com [208.212.82.194]) by hub.freebsd.org (Postfix) with ESMTP id B8D5A15567 for ; Mon, 4 Oct 1999 11:04:11 -0700 (PDT) (envelope-from kwills@gflesch.com) Received: from gfc-mad-mail.gflesch.com (gfc-mad-mail.gflesch.int [10.1.1.25]) by gfc-mad-proxy.gflesch.com (8.9.2/8.9.1) with ESMTP id MAA48616; Mon, 4 Oct 1999 12:56:01 -0500 (CDT) (envelope-from kwills@gflesch.com) Received: by gfc-mad-mail.gflesch.int with Internet Mail Service (5.5.2448.0) id ; Mon, 4 Oct 1999 13:03:37 -0500 Message-ID: <058BE165CBA8D111A82E0008C79F9E35024845@gfc-mad-dc.gflesch.int> From: "Wills, Ken" To: Alejandro Ramirez , wwoods@cybcon.com, questions@FreeBSD.ORG Subject: RE: Weird network problem..... Date: Mon, 4 Oct 1999 13:03:43 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Alejandro > Ramirez > Sent: Monday, October 04, 1999 11:19 AM > To: wwoods@cybcon.com; questions@FreeBSD.ORG > Subject: RE: Weird network problem..... > > > reboot system #2 (The Alpha), it does NOT reconnect and I > cant ping system > #1 > > untill I reboot system #1.... > > Make sure both machines are ifconfig'd to use 10baseT/UTP and not autoselect. Some of those cards (de) will switch to another media type if the line goes down. Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11: 4:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id 044E315587 for ; Mon, 4 Oct 1999 11:04:22 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id WAA12343; Mon, 4 Oct 1999 22:54:24 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id XAA00782; Mon, 4 Oct 1999 23:05:06 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id WAA00764; Mon, 4 Oct 1999 22:59:03 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Mon, 4 Oct 1999 22:59:01 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Kent Stewart Cc: Marc Schneiders , Oleg Ogurok , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: <37F7C1F8.4A3BDD1F@3-cities.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Sun, 3 Oct 1999, Kent Stewart wrote: > > > > Anyway, there are 386 PC's which simply can't store more RAM or which > > have 4 * 1 MB and would need 4 * 4 MB, costing $ 50 (in my country). It > > would be nice if these old PC's were usable, esp. for people to try > > FreeBSD. You cannot, of course, sacrifice anything useful for that reason. > > It would be nice though, if possible. > > The problem is the response of such a system. They could think FreeBSD > is terrible and it is really their lack of RAM. If you advertise such > a system, you also have to warn about the possible lack of > performance. I have a spare system, which is exactly Intel 386DX-33 (overclocked to 40MHz) with 4Mb of RAM. I'd happy to built a system which will work 24-hours only as E-mail/new/FIDO gateway. Perfomance _is_ acceptable. I have a 28.8K modem for dialing out. My experience proves that 386DX-40 can handle 4 x 115200 NUL-modems + 10Mb Ethernet (well, it was Linux RH-5.0 boxen running as IPX <-> IP <-> IPX gateway). I think that my 386 boxen will stay without any use ... Anybody knows, is it possible to install NetBSD/OpenBSD on 4Mb of RAM ?! I sort of dissapointed ... I thought that microkernel concept (isn't it the same as "possibility to load almost any driver on demand" ?) doesn't require much memory. Anyway, thanks to all your responses, You did a great job working on FreeBSD project. > > Kent Regards, Ilia Chipitsine -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/jc1+RxlWKN2EXhAQFgdgL+KfKzZi9wYHAX/X6BTsUL6pbnUfdX+H3i KmxZ+fvGYWkFofl+0Npvf30+BG3z/fUq63qtmZwrJNBNrPvVNrcpZJrL6z7W5DV3 1XWLqlfuNPI5aMI1984CgmDIegPDnI38 =2LWz -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11: 5:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 3A33A1560B for ; Mon, 4 Oct 1999 11:05:01 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YCTs-0006x5-00; Mon, 4 Oct 1999 19:05:00 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id TAA11071; Mon, 4 Oct 1999 19:04:59 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 19:04:59 +0100 (BST) From: J McKitrick To: Chris Fedde Cc: freebsd-questions@freebsd.org Subject: Re: saving space on laptop HD... In-Reply-To: <199910041708.LAA24783@fedde.littleton.co.us> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Of course, what i need to remember is that i already HAVE a lot of tools installed, and on a single user workstation FreeBSD system, 1 gig can go a long way ! ;-) -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11: 9:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cx559415-b.ftwal1.fl.home.com (cx559415-b.ftwal1.fl.home.com [24.6.55.158]) by hub.freebsd.org (Postfix) with ESMTP id A814B1552A for ; Mon, 4 Oct 1999 11:09:03 -0700 (PDT) (envelope-from mark@cx559415-b.ftwal1.fl.home.com) Received: from camelot (camelot.cmr.net [10.1.1.2]) by cx559415-b.ftwal1.fl.home.com (8.9.3/8.9.3) with SMTP id NAA09045 for ; Mon, 4 Oct 1999 13:57:46 -0500 (CDT) (envelope-from mark@cx559415-b.ftwal1.fl.home.com) Reply-To: From: "Mark Einreinhof" To: "Freebsd-Questions" Subject: colorls question Date: Mon, 4 Oct 1999 13:08:23 -0500 Message-ID: <000001bf0e93$7328d360$0201010a@cmr.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have colorls installed. I would like to just type "ls" or "dir" to get the equivalent of typing "colorls -G", or if I type "dir -al" I get "colorls -Gal" equivalent results. ********************************************** The box said "requires Win95 or better"... So I installed it on FreeBSD;-) 'Anonymous' ********************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:14:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from exch002.co.westchester.ny.us (exch002.co.westchester.ny.us [163.151.33.25]) by hub.freebsd.org (Postfix) with ESMTP id 8806114BF5 for ; Mon, 4 Oct 1999 11:14:41 -0700 (PDT) (envelope-from ppd2@co.westchester.ny.us) Received: by exch002.co.westchester.ny.us with Internet Mail Service (5.5.2448.0) id ; Mon, 4 Oct 1999 14:11:50 -0400 Message-ID: <17B91896EB94D211A8930090271EB8D7065FF5@exch002.co.westchester.ny.us> From: "Dongre, Prashant" To: "Per D. Jensen" Cc: questions@FreeBSD.ORG Subject: RE: Very Newbie Q Date: Mon, 4 Oct 1999 14:11:49 -0400 X-Mailer: Internet Mail Service (5.5.2448.0) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Per D. Jensen wrote: > Hi all! > > I've just subscribed to the FreeBSD mailingslist and my first question is: > > Is it feasible to install FreeBSD via a 56K modem? How many Megs do I > have to download to get a system running? Lets say without X for starters; > just a mininal BSD UNIX system. > > JFYI: I'm not new to UNIX, as I've been using Linux for a year or so at home > and uses AIX and Solaris (onb a user level) at work. > > Thanks! > > -- > Per Dalum Jensen - 5506 > "The real University is a state of Mind" Yes it works, I have had dialed and left it to install with X and minimal config. Next day I downloaded source and etc. Prashant To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:18:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dmog10.bell.ca (dmog10.bell.ca [198.235.69.18]) by hub.freebsd.org (Postfix) with ESMTP id 682A9151AB for ; Mon, 4 Oct 1999 11:18:29 -0700 (PDT) (envelope-from ijbrown@on.bell.ca) Received: from on.bell.ca ([142.182.248.8]) by dmog10.bell.ca with ESMTP id OAA11506 for ; Mon, 4 Oct 1999 14:18:27 -0400 (EDT) Received: from on.bell.ca (dm2ck7.ON.Bell.CA [142.182.51.233]) by on.bell.ca with ESMTP id OAA02042 for ; Mon, 4 Oct 1999 14:18:15 -0400 (EDT) Message-ID: <37F8EEB7.F1684F6F@on.bell.ca> Date: Mon, 04 Oct 1999 14:15:20 -0400 From: "Ian J. Brown" Organization: Bell Nexxia X-Mailer: Mozilla 4.5 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: Kernel Re-Build Failure (IPFilter) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I'm trying to to complie a new Kernel to include support for IPFilter but everytime I try it fails on the following error: cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitialized -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I/usr/include -DKERNEL -DVM_STACK -include opt_global.h -elf ../../netinet/ip_fil.c ../../netinet/ip_fil.c:27: sys/osreldate.h: No such file or directory *** Error code 1 Any ideas what I'm doing wrong?? Here's a copy of my custom kernel configuration: dm2cki# cat IAN # # IAN -- My configuration File # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: IAN,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ machine "i386" cpu "I586_CPU" cpu "I686_CPU" ident IAN maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options IPFILTER options IPFILTER_LOG options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 #controller pnp0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # #device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # #device ax0 # ASIX AX88140A #device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II #device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F #device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory and message queues. # options SYSVSHM options SYSVMSG options SYSVSEM # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter Thanks, IJ ======================================================================== Ian J. Brown CCIE #3372 Consultant - Bell Nexxia, Engineering and Design Toronto, Ontario (416)215-2793 ijbrown@on.bell.ca {fdNvDBZJaLfzk} ======================================================================== "Don't take life too serious...you won't get out alive!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:22:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta4.rcsntx.swbell.net (mta4.rcsntx.swbell.net [151.164.30.28]) by hub.freebsd.org (Postfix) with ESMTP id E2F5F14EFC for ; Mon, 4 Oct 1999 11:22:50 -0700 (PDT) (envelope-from chris@tourneyland.com) Received: from momma ([216.62.177.1]) by mta4.rcsntx.swbell.net (Sun Internet Mail Server sims.3.5.1999.09.16.21.57.p8) with SMTP id <0FJ3009T1CE0YZ@mta4.rcsntx.swbell.net> for freebsd-questions@FreeBSD.ORG; Mon, 4 Oct 1999 13:22:49 -0500 (CDT) Date: Mon, 04 Oct 1999 13:21:56 -0500 From: chris@tourneyland.com Subject: Re: 3.3-Release - problem with PATH? In-reply-to: <19991004163708.O63946@daemon.ninth-circle.org> X-Sender: pop992333@mail.9netave.net To: freebsd-questions@FreeBSD.ORG Message-id: <3.0.6.32.19991004132156.008e3850@mail.9netave.net> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Content-type: text/plain; charset="us-ascii" References: <37F7CCFF.D2B7DC70@3-cities.com> <3.0.6.32.19991003122429.008dea80@mail.9netave.net> <37F7CCFF.D2B7DC70@3-cities.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I guess I should have been more clear - the problem isn't that I can't run programs in the current directory, it's that I can't run programs on the path. It seems like the problem is that if I install a program on the path, I can't run it until I logout and log back in. It's as if all the programs on the path are stored in some sort of database that the shell is consulting, and new installs don't get committed to this db until I log out. That would be kind of silly, so I'll bet it's something else, but at any rate that's what it's acting like. Thanks though, Chris At 04:37 PM 10/4/99 +0200, you wrote: >On [19991003 23:46], Kent Stewart (kstewart@3-cities.com) wrote: >>chris@tourneyland.com wrote: >>> >>> I just upgraded from 3.2 Release to 3.3 Release. No problems, except it >>> seems that now my PATH variable is being ignored. My PATH is just fine, >>> except trying to execute anything on the path (e.g. bash) gives me 'command >>> not found'. Using the full path name works fine. >>> >>It is the kind of response you get when "." isn't in your path. I >>personally don't have dot in my path and I have to run via ./program. > >>From a security perspective that's the best thing to do. > >Using a . in your PATH makes you way less careful about running unknown >programs. > >So I always recommend not putting a . in one's PATH. Seems most Linux >people do indeed put the . in there. *sigh* > >-- >Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl >The BSD Programmer's Documentation Project >Network/Security Specialist BSD: Technical excellence at its best >Whispering winds in moonlit wood, a totem oak once golden stood... > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:33: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from akira.techzone.cx (edtn006337.hs.telusplanet.net [161.184.136.241]) by hub.freebsd.org (Postfix) with ESMTP id D45321553F for ; Mon, 4 Oct 1999 11:32:59 -0700 (PDT) (envelope-from rbi@techzone.cx) Received: from localhost (rbi@localhost) by akira.techzone.cx (8.9.3/8.9.3) with ESMTP id MAA13525; Mon, 4 Oct 1999 12:32:43 -0600 (MDT) (envelope-from rbi@techzone.cx) Date: Mon, 4 Oct 1999 12:32:42 -0600 (MDT) From: Rbi To: big-sky@altavista.net Cc: Freebsd-Questions Subject: Re: colorls question In-Reply-To: <000001bf0e93$7328d360$0201010a@cmr.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Mark, I ran in to the same problem. Here is what I did : - Renamed the original "ls" to "ls-org". Then renamed colorls to "ls". I then created a shell alias for "ls" that excutes the switches you might want.( example - alias ls="ls -GAFT" ) I don't know how safe this is but it's been workin for me for a while. If anybody know of a reason I shouldn't do this let me know ! I guess you could just create an shell alias for "ls" that uses colorls and it's switches. ( example - alias ls="colorls -GAFT) Good luck.... ******************************** rbi@techzone.cx http://www.freebsd.org The Power to Serve. ******************************** On Mon, 4 Oct 1999, Mark Einreinhof wrote: > I have colorls installed. I would like to just type "ls" or "dir" to get the > equivalent of typing "colorls -G", or if I type "dir -al" I get > "colorls -Gal" equivalent results. > > ********************************************** > The box said "requires Win95 or better"... > So I installed it on FreeBSD;-) > 'Anonymous' > ********************************************** > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:40:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.primenet.com (smtp04.primenet.com [206.165.6.134]) by hub.freebsd.org (Postfix) with ESMTP id 10CA9154F1 for ; Mon, 4 Oct 1999 11:40:05 -0700 (PDT) (envelope-from godfreja@primenet.com) Received: (from daemon@localhost) by smtp04.primenet.com (8.9.3/8.9.3) id LAA08753; Mon, 4 Oct 1999 11:39:56 -0700 (MST) Received: from usr03.primenet.com(206.165.6.203) via SMTP by smtp04.primenet.com, id smtpdAAAwpaiVq; Mon Oct 4 11:39:35 1999 Date: Mon, 4 Oct 1999 13:39:36 -0500 (CDT) From: Jason Godfrey To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3-Release - problem with PATH? In-Reply-To: <3.0.6.32.19991004132156.008e3850@mail.9netave.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Are you using csh (or one of it's offspring)? They scan your PATH and keep a list of available porgrams when you log in. If you add a program it won't show up untill a new scan is done. (In your case by loggin back in.) To force a rescan issue the command rehash And it should work. Other shells may be the same way, but I do not know. On Mon, 4 Oct 1999 chris@tourneyland.com wrote: > I guess I should have been more clear - the problem isn't that I can't run > programs in the current directory, it's that I can't run programs on the path. > > It seems like the problem is that if I install a program on the path, I > can't run it until I logout and log back in. It's as if all the programs on > the path are stored in some sort of database that the shell is consulting, > and new installs don't get committed to this db until I log out. That would > be kind of silly, so I'll bet it's something else, but at any rate that's > what it's acting like. > > Thanks though, > Chris > > At 04:37 PM 10/4/99 +0200, you wrote: > >On [19991003 23:46], Kent Stewart (kstewart@3-cities.com) wrote: > >>chris@tourneyland.com wrote: > >>> > >>> I just upgraded from 3.2 Release to 3.3 Release. No problems, except it > >>> seems that now my PATH variable is being ignored. My PATH is just fine, > >>> except trying to execute anything on the path (e.g. bash) gives me > 'command > >>> not found'. Using the full path name works fine. > >>> > >>It is the kind of response you get when "." isn't in your path. I > >>personally don't have dot in my path and I have to run via ./program. > > > >>From a security perspective that's the best thing to do. > > > >Using a . in your PATH makes you way less careful about running unknown > >programs. > > > >So I always recommend not putting a . in one's PATH. Seems most Linux > >people do indeed put the . in there. *sigh* > > > >-- > >Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl > >The BSD Programmer's Documentation Project > >Network/Security Specialist BSD: Technical excellence at its best > >Whispering winds in moonlit wood, a totem oak once golden stood... > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:43:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 14CF2154BF for ; Mon, 4 Oct 1999 11:43:43 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 5231 invoked from network); 4 Oct 1999 18:43:41 -0000 Received: from userbr18.uk.uudial.com (HELO marder-1.) (62.188.146.211) by smtp.dial.pipex.com with SMTP; 4 Oct 1999 18:43:41 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id TAA00727; Mon, 4 Oct 1999 19:43:36 +0100 (BST) (envelope-from mark) Date: Mon, 4 Oct 1999 19:43:35 +0100 From: Mark Ovens To: chris@tourneyland.com Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-Release - problem with PATH? Message-ID: <19991004194335.A316@marder-1> References: <37F7CCFF.D2B7DC70@3-cities.com> <3.0.6.32.19991003122429.008dea80@mail.9netave.net> <37F7CCFF.D2B7DC70@3-cities.com> <19991004163708.O63946@daemon.ninth-circle.org> <3.0.6.32.19991004132156.008e3850@mail.9netave.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <3.0.6.32.19991004132156.008e3850@mail.9netave.net> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, Oct 04, 1999 at 01:21:56PM -0500, chris@tourneyland.com wrote: > I guess I should have been more clear - the problem isn't that I can't run > programs in the current directory, it's that I can't run programs on the path. > > It seems like the problem is that if I install a program on the path, I > can't run it until I logout and log back in. It's as if all the programs on > the path are stored in some sort of database that the shell is consulting, > and new installs don't get committed to this db until I log out. That would > be kind of silly, so I'll bet it's something else, but at any rate that's > what it's acting like. > You need to rebuild the hash table if you want to your newly installed program in a currently running shell. If your running csh(1) (and maybe other shells as well, I'm not sure) try typing ``rehash'' at the command prompt, then your program name. > Thanks though, > Chris > > At 04:37 PM 10/4/99 +0200, you wrote: > >On [19991003 23:46], Kent Stewart (kstewart@3-cities.com) wrote: > >>chris@tourneyland.com wrote: > >>> > >>> I just upgraded from 3.2 Release to 3.3 Release. No problems, except it > >>> seems that now my PATH variable is being ignored. My PATH is just fine, > >>> except trying to execute anything on the path (e.g. bash) gives me > 'command > >>> not found'. Using the full path name works fine. > >>> > >>It is the kind of response you get when "." isn't in your path. I > >>personally don't have dot in my path and I have to run via ./program. > > > >>From a security perspective that's the best thing to do. > > > >Using a . in your PATH makes you way less careful about running unknown > >programs. > > > >So I always recommend not putting a . in one's PATH. Seems most Linux > >people do indeed put the . in there. *sigh* > > > >-- > >Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl > >The BSD Programmer's Documentation Project > >Network/Security Specialist BSD: Technical excellence at its best > >Whispering winds in moonlit wood, a totem oak once golden stood... > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:47:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from syru205-140.syr.edu (syru205-140.syr.edu [128.230.205.140]) by hub.freebsd.org (Postfix) with ESMTP id 30E24154F9 for ; Mon, 4 Oct 1999 11:47:38 -0700 (PDT) (envelope-from rhavyn@syru205-140.syr.edu) Received: (from rhavyn@localhost) by syru205-140.syr.edu (8.9.3/8.9.3) id OAA10278; Mon, 4 Oct 1999 14:44:18 -0400 Date: Mon, 4 Oct 1999 14:44:18 -0400 From: Chris Conrad To: Tony Cc: freebsd-questions@FreeBSD.org Subject: Re: GNOME: Does anyone use it? Message-ID: <19991004144418.A10036@syru205-140.syr.edu> References: <99100408410801.37693@fdho-w5.fdnet.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="mP3DRpeJDSE+ciuQ" X-Mailer: Mutt 1.0pre2i In-Reply-To: <99100408410801.37693@fdho-w5.fdnet.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --mP3DRpeJDSE+ciuQ Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable On Mon, Oct 04, 1999 at 08:32:00AM -0500, Tony wrote: > I see many screenshots from the Linux community where people use this glo= rified > toolbar but from my experience, it's most reliable feature is creating .c= ore > files. >=20 > I've compiled and recompiled this port from the ground up several > different times over the past 9 months and I never can seem to find the > functionality of it. (recompiling the latest port dependancies, reinsta= lling > etc.) >=20 > I load up a window-manager, start an xterm and type "panel" at which poin= t I > get the main GNOME toolbar. If I try to configure it, it core dumps, if = I do > most anything it core dumps. It never wants to switch away from enlighte= nment > being the default manager etc. >=20 > My question is this: Are any people in the FreeBSD community using the GN= OME > port happily? Did I skip a fundamental /home/userdir setup script? =20 >=20 > It's not important that I get it working, I just like to know why things = aren't > working as they should. >=20 > Tony I've used and tested the GNOME from about version 0.30, and yes it does have some problems. Unfortunately, however, most of the major work on the GNOME occurs on Linux. I have a Redhat 6.1 box, and on that machine, I have never had the GNOME crash on me. I don't think I recal even having a GNOME app crash on me. On FreeBSD however, the GNOME is just miserable. I think the best thing to do in this case is to whip out your editor of choice, load up gdb and start working thru all the core files and see if we can't get the GNOME to as usable a state on FreeBSD as it is on Linux. Chris --mP3DRpeJDSE+ciuQ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.0 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE3+PWCpolY3ACeQwwRAcWqAJsH09YDdKRZvdvme2GxmHffvBWZiwCgo0Xg NNx7vKLyn91jUdN/1kjM31A= =frbl -----END PGP SIGNATURE----- --mP3DRpeJDSE+ciuQ-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:50: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from console.prisa.com (gatekeeper.prisa.com [204.94.67.66]) by hub.freebsd.org (Postfix) with SMTP id D80E81550A for ; Mon, 4 Oct 1999 11:49:45 -0700 (PDT) (envelope-from nschein@prisa.com) From: "Nathaniel Schein" To: "Freebsd Questions" Subject: rpc.yppasswdd Date: Mon, 4 Oct 1999 11:50:02 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have nis_yppasswdd_enable="YES" in the 'rc.conf' of the nis master and when I reboot the server the following error message appears: Doing additional network setup: named portmap ypserv rpc.yppasswddrpc.yppasswdd: can't get name of NIS master server for domain prisa.com . Starting final network daemons: mountd nfsd rpc.statd nfsiod amd. Has anyone ever encountered this error and if so what was done to fix it? Nathaniel Schein System Administrator mailto:nschein@prisa.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 11:50:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 8F303154E2 for ; Mon, 4 Oct 1999 11:50:01 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YDBR-000J6R-00; Mon, 4 Oct 1999 19:50:01 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id TAA11467; Mon, 4 Oct 1999 19:50:00 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Mon, 4 Oct 1999 19:50:00 +0100 (BST) From: J McKitrick To: big-sky@altavista.net Cc: Freebsd-Questions Subject: Re: colorls question In-Reply-To: <000001bf0e93$7328d360$0201010a@cmr.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Try editing your .profile or whatever your startup script is: i use bash, so mine says: alias ls="ls -g" -jm >I have colorls installed. I would like to just type "ls" or "dir" to get the >equivalent of typing "colorls -G", or if I type "dir -al" I get >"colorls -Gal" equivalent results. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:12:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.wxs.nl (smtp01.wxs.nl [195.121.6.61]) by hub.freebsd.org (Postfix) with ESMTP id 3D3A5150D0 for ; Mon, 4 Oct 1999 12:12:05 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.199.38]) by smtp01.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA4E52; Mon, 4 Oct 1999 21:12:03 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id VAA96281; Mon, 4 Oct 1999 21:10:55 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 21:10:55 +0200 From: Jeroen Ruigrok/Asmodai To: Rbi Cc: big-sky@altavista.net, Freebsd-Questions Subject: Re: colorls question Message-ID: <19991004211055.C96050@daemon.ninth-circle.org> References: <000001bf0e93$7328d360$0201010a@cmr.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 20:49], Rbi (rbi@techzone.cx) wrote: >I guess you could just create an shell alias for "ls" that uses colorls >and it's switches. ( example - alias ls="colorls -GAFT) And which is preferred since you then know that you haven't messed with the system's standard command which might be needed by other programs with any particular flags. Also, what also works is putting ~/bin as the first path statement in your PATH and cp colorls to ~/bin/ls and when you type ls it will us the first ls it can find, which is based in ~/bin HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Sometimes the blind see more than those who see... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:18:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from console.prisa.com (gatekeeper.prisa.com [204.94.67.66]) by hub.freebsd.org (Postfix) with SMTP id 9EF4D150D0 for ; Mon, 4 Oct 1999 12:18:36 -0700 (PDT) (envelope-from nschein@prisa.com) From: "Nathaniel Schein" To: "Freebsd Questions" Subject: Upgrade Date: Sat, 4 Sep 1999 12:18:52 -0700 Message-ID: <8117aa1277b47179918b05627b26035237f8fda4@(null)> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Recently I tried to upgrade 3.1 to 3.3. I did this by downloading the 3.3 source and doing a make world. The kernel was deleted and on reboot I specified boot kernel.generic. I next went to compile a kernel, which I have done many times. After a make install, I rebooted and encounted the message fatal trap rebooting in 9, 8, 7 .... After this I tried to boot to kernel.generic and the OS said kernel module already loaded. What happened? Is this just a basically bad way to upgrade, and is there a better way to upgrade? Also, is there another way to boot to a different kernel without introducing another file system. Nathaniel Schein System Administrator mailto:nschein@prisa.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:22:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from diarmadhi.mushhaven.net (cm-24-142-61-124.cableco-op.ispchannel.com [24.142.61.124]) by hub.freebsd.org (Postfix) with ESMTP id 51251150D0 for ; Mon, 4 Oct 1999 12:22:14 -0700 (PDT) (envelope-from mistwolf@diarmadhi.mushhaven.net) Received: (from mistwolf@localhost) by diarmadhi.mushhaven.net (8.9.3/8.9.3) id MAA83359 for freebsd-questions@freebsd.org; Mon, 4 Oct 1999 12:22:40 -0700 (PDT) (envelope-from mistwolf) Date: Mon, 4 Oct 1999 12:22:40 -0700 From: Jamie Norwood To: freebsd-questions@freebsd.org Subject: Question on upgrading machine Message-ID: <19991004122240.A83307@mushhaven.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am considering moving a machine I have from 3 small drives (2 2 G drives, I 4g drive) to 1 18G Cheetah. The question I have is, could I safely install and configure it and get it all running happily and such in a seperate machine from my running server, then just move the SCSI host adapter and the drive into the main server? Is this a major nono, or is it safe? Should I do a make world to make sure it is fully right for that hardware? Thanks for the help! Jamie To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:24:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from compass.OregonVOS.net (compass.oregonvos.net [159.121.170.2]) by hub.freebsd.org (Postfix) with ESMTP id 47E2E15554 for ; Mon, 4 Oct 1999 12:23:29 -0700 (PDT) (envelope-from th@huppi.com) Received: from sis.huppih.com (ppp5-ast.orednet.org [159.121.170.196]) by compass.OregonVOS.net (8.9.1/8.9.1) with ESMTP id MAA22483; Mon, 4 Oct 1999 12:21:01 -0700 (PDT) Received: from localhost (th@localhost) by sis.huppih.com (8.8.8/8.8.8) with ESMTP id MAA05315; Mon, 4 Oct 1999 12:36:46 -0700 (PDT) (envelope-from th@huppi.com) X-Authentication-Warning: sis.huppih.com: th owned process doing -bs Date: Mon, 4 Oct 1999 12:36:46 -0700 (PDT) From: Tom Huppi X-Sender: th@sis.huppih.com Reply-To: Tom Huppi To: Jeroen Ruigrok/Asmodai Cc: freebsd-questions@FreeBSD.ORG Subject: Re: (probably) dumb question about ports collection In-Reply-To: <19991004144639.T63946@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Jeroen Ruigrok/Asmodai wrote: > On [19991004 09:45], Tom Huppi (th@huppi.com) wrote: > > >There is also a "rehash" command which is, supposedly effective > >with csh. I have yet to correlate running it with solving any of > >the particular problems that I have come up against. > > rehash: > > rehash Cause the internal hash table of the contents of the directories > in the path variable to be recomputed. This is needed if new commands > are added to directories in the path while you are logged in. This > should only be necessary if you add commands to one of your own > directories, or if a systems programmer changes the contents of a system > directory. > > HTH, It does, though I had read that somewhere previously. Actually what is helping (me) more is that I am begining to understand the mechanism by which new processes come into existance, and how they gain the information they use to execute. I use the term "begining" lightly :) Thanks -Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:27: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id 0F00514F5F for ; Mon, 4 Oct 1999 12:26:19 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id PAA11017; Mon, 4 Oct 1999 15:25:49 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Mon, 4 Oct 1999 15:25:49 -0400 (EDT) From: Brett Taylor To: Chris Conrad Cc: Tony , freebsd-questions@FreeBSD.ORG Subject: Re: GNOME: Does anyone use it? In-Reply-To: <19991004144418.A10036@syru205-140.syr.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Mon, 4 Oct 1999, Chris Conrad wrote: > Unfortunately, however, most of the major work on the GNOME occurs on > Linux. I have a Redhat 6.1 box, and on that machine, I have never had > the GNOME crash on me. I don't think I recal even having a GNOME app > crash on me. On FreeBSD however, the GNOME is just miserable. This is completely contrary to what I've heard - that Gnome is unstable even on Linux. It may be _more_ stable on Linux (Red Hat in particular), but I haven't heard glowing reviews of its stability anywhere. Brett ***************************************************** Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:32:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id EB4F114DAC for ; Mon, 4 Oct 1999 12:32:08 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from localhost (doug@localhost) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id MAA34620; Mon, 4 Oct 1999 12:31:53 -0700 (PDT) (envelope-from Doug@gorean.org) Date: Mon, 4 Oct 1999 12:31:53 -0700 (PDT) From: Doug X-Sender: doug@dt011n66.san.rr.com To: Christoph Kukulies Cc: questions@freebsd.org Subject: Re: syslogd unknown priority name "" In-Reply-To: <199910040940.LAA39225@gil.physik.rwth-aachen.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Christoph Kukulies wrote: > > 3.2: > > I'm continously getting > > syslogd: unknown priority name "" > syslogd: unknown priority name "" > > in my console log. Check for spaces in your /etc/syslog.conf file. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:32:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from imsp075.netvigator.com (imsp075.netvigator.com [208.139.127.58]) by hub.freebsd.org (Postfix) with ESMTP id 96F5D15540 for ; Mon, 4 Oct 1999 12:32:07 -0700 (PDT) (envelope-from webmaster@hkprod.com.hk) Received: from hkprod ([202.82.164.69]) by imsp075.netvigator.com (8.8.8/8.8.8) with SMTP id XAA08302; Mon, 4 Oct 1999 23:38:48 +0800 (HKT) Message-ID: <011201bf0e81$f18ec960$45a452ca@hkprod.GLCO> Reply-To: "gold001" From: "gold001" To: Subject: GLOBAL TRADE DIRECTORY Date: Mon, 4 Oct 1999 23:35:49 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_010F_01BF0EC4.FFB20960" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_010F_01BF0EC4.FFB20960 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: quoted-printable * ONE OF THE WORLD'S LARGEST DIRECTORY OF PRODUCTS & SERVICES =20 * 955.000 COMPANIES LISTED =20 * FREE REGISTRATION =20 http://www.hkprod.com.hk =20 http://business.netvigator.com/mp/gtd ------=_NextPart_000_010F_01BF0EC4.FFB20960 Content-Type: text/html; charset="big5" Content-Transfer-Encoding: quoted-printable
* ONE OF = THE WORLD'S=20 LARGEST DIRECTORY OF PRODUCTS & SERVICES
 
* 955.000 = COMPANIES=20 LISTED
 
* FREE=20 REGISTRATION
 
 
------=_NextPart_000_010F_01BF0EC4.FFB20960-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:46: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from majordomo2.umd.edu (majordomo2.umd.edu [128.8.10.7]) by hub.freebsd.org (Postfix) with ESMTP id EE37414EDD for ; Mon, 4 Oct 1999 12:45:56 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac5.wam.umd.edu (root@rac5.wam.umd.edu [128.8.10.145]) by majordomo2.umd.edu (8.9.3/8.9.3) with ESMTP id PAA26547; Mon, 4 Oct 1999 15:45:43 -0400 (EDT) Received: from rac5.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id PAA14714; Mon, 4 Oct 1999 15:45:47 -0400 (EDT) Received: from localhost (culverk@localhost) by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA14706; Mon, 4 Oct 1999 15:45:44 -0400 (EDT) X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs Date: Mon, 4 Oct 1999 15:45:44 -0400 (EDT) From: Kenneth Wayne Culver To: Ian Diddams Cc: "freebsd-questions@freebsd.org" Subject: Re: More sound blaster 16 In-Reply-To: <37F8B436.F76DF38B@freenet.uk.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > I've a SB16 that works perfectly fine with Win98. > > However, under FBSD 3.2, it makes not a joty of sound, and the only > clues I have are the KDE (as my windowmanager) midi-player complaining > of "ERROR - Can't open Output Device". > > kernel config looks fine - > > controller snd0 > device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 > device opl0 at isa? port 0x388 conflicts > device pca0 at isa? port IO_TIMER1 tty > > Actually no it doesn't, get rid of the last line. > > dmesg output is fine - > > Oct 4 14:52:51 saul /kernel: sb0 at 0x220 irq 5 drq 1 on isa > Oct 4 14:52:51 saul /kernel: snd0: > Oct 4 14:52:51 saul /kernel: sbxvi0 at drq 5 on isa > Oct 4 14:52:51 saul /kernel: snd0: > Oct 4 14:52:51 saul /kernel: sbmidi0 at 0x330 on isa > Oct 4 14:52:51 saul /kernel: snd0: > Oct 4 14:52:51 saul /kernel: opl0 at 0x388 on isa > Oct 4 14:52:51 saul /kernel: snd0: > > > Any further ideas anybody? > > HAve you done a MAKEDEV snd0 in /dev? do this: cd /dev sh MAKEDEV snd0 and then try sound again. > > -- > Didds > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:47:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from po4.wam.umd.edu (po4.wam.umd.edu [128.8.10.166]) by hub.freebsd.org (Postfix) with ESMTP id 6353115547 for ; Mon, 4 Oct 1999 12:46:59 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac5.wam.umd.edu (root@rac5.wam.umd.edu [128.8.10.145]) by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA25013; Mon, 4 Oct 1999 15:46:58 -0400 (EDT) Received: from rac5.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id PAA15018; Mon, 4 Oct 1999 15:46:51 -0400 (EDT) Received: from localhost (culverk@localhost) by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id PAA15010; Mon, 4 Oct 1999 15:46:51 -0400 (EDT) X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs Date: Mon, 4 Oct 1999 15:46:51 -0400 (EDT) From: Kenneth Wayne Culver To: Jeroen Ruigrok/Asmodai Cc: "Erik S. Carlsten" , freebsd-questions@FreeBSD.ORG Subject: Re: Diamond Monster Sound MX300 In-Reply-To: <19991004154620.D63946@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I would be glad to help test the Aureal Vortex 1 chip, the Diamond Monstor sound has the Aureal Vortex II chip, or the 8830, while the vortex 1 has the 8820. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Mon, 4 Oct 1999, Jeroen Ruigrok/Asmodai wrote: > On [19991004 09:45], Erik S. Carlsten (ecarlste@cs.montana.edu) wrote: > >Is it possible to configure a Kernel that can handle a Diamond Monster Sound > >MX300 or will I have to buy a new ISA sound card to get it to work. If the > >Monster will not work, what is the best card that FreeBSD's Kernel can > >handle? > > Find out what chipsets are in use on that board, mail any > results/findings back to us or try to find technical documentation for > your card and kindly ask Cameron Grant if you could > help him into getting this card supported within FreeBSD. Note that this > will probably require that you run CURRENT to test his changes. > > If it's a PCI card be sure to do a pciconf -l as root. > > And with technical docs I mean those docs which actually detail the > chips and registers and whatnot. > > HTH, > > -- > Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl > The BSD Programmer's Documentation Project > Network/Security Specialist BSD: Technical excellence at its best > Any road leads to the end of the world. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 12:51:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gfc-mad-proxy.gflesch.com (gfc-mad-proxy.gflesch.com [208.212.82.194]) by hub.freebsd.org (Postfix) with ESMTP id 1677114EFC for ; Mon, 4 Oct 1999 12:51:03 -0700 (PDT) (envelope-from kwills@gflesch.com) Received: from gfc-mad-mail.gflesch.com (gfc-mad-mail.gflesch.int [10.1.1.25]) by gfc-mad-proxy.gflesch.com (8.9.2/8.9.1) with ESMTP id OAA51378; Mon, 4 Oct 1999 14:43:02 -0500 (CDT) (envelope-from kwills@gflesch.com) Received: by gfc-mad-mail.gflesch.int with Internet Mail Service (5.5.2448.0) id ; Mon, 4 Oct 1999 14:50:40 -0500 Message-ID: <058BE165CBA8D111A82E0008C79F9E35024846@gfc-mad-dc.gflesch.int> From: "Wills, Ken" To: wwoods@cybcon.com Cc: questions@freebsd.org Subject: RE: Weird network problem..... Date: Mon, 4 Oct 1999 14:50:43 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="windows-1252" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > From: wwoods@cybcon.com [mailto:wwoods@cybcon.com] > Sent: Monday, October 04, 1999 1:15 PM > To: kwills@gflesch.com > Subject: RE: Weird network problem..... > > > How do I do that? > > On Mon, 04 October 1999, "Wills, Ken" wrote: > > > > > > > > > Make sure both machines are ifconfig'd to use 10baseT/UTP and > > not autoselect. Some of those cards (de) will switch to > another media > > type if the line goes down. > > by hand: ifconfig de0 -media 10BaseT/UTP or add the -media part it to the ifconfig_de0 in /etc/rc.conf. ifconfig de0 will show you the supported media types. Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13: 1:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dmog10.bell.ca (dmog10.bell.ca [198.235.69.18]) by hub.freebsd.org (Postfix) with ESMTP id EA2DF15209 for ; Mon, 4 Oct 1999 13:01:04 -0700 (PDT) (envelope-from ijbrown@on.bell.ca) Received: from on.bell.ca ([142.182.248.8]) by dmog10.bell.ca with ESMTP id QAA09926 for ; Mon, 4 Oct 1999 16:00:54 -0400 (EDT) Received: from on.bell.ca (dm2ck7.ON.Bell.CA [142.182.51.233]) by on.bell.ca with ESMTP id QAA08796 for ; Mon, 4 Oct 1999 16:00:43 -0400 (EDT) Message-ID: <37F906BC.8F0769F4@on.bell.ca> Date: Mon, 04 Oct 1999 15:57:48 -0400 From: "Ian J. Brown" Organization: Bell Nexxia X-Mailer: Mozilla 4.5 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: IPFilter Support?? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Does FreeBSD still support IP Filter? I can't find any information on the FreeBSD web site on how to load IP Filter (except for the kernel options to load IPFILTER). I notice it's been removed from the ports/packages area and I have a real need to run it (I certainly don't want to switch to Linux at this point). I've even gone to to the IPFilter main site (which states that FreeBSD has IPfilter built in!?!) and downloaded the original version, but everytime I try to modify my Kernel to include "options IPFILTER" it crashes and burns... I'm running 3.2-Stable and I'm out of answers. Does anyone have any experience with FreeBSD 3.2 and IPFilter that can offer some suggestions? Thanks, IJ ======================================================================== Ian J. Brown CCIE #3372 Consultant - Bell Nexxia, Engineering and Design Toronto, Ontario (416)215-2793 ijbrown@on.bell.ca {fdNvDBZJaLfzk} ======================================================================== "Don't take life too serious...you won't get out alive!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13: 3:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from syru205-140.syr.edu (syru205-140.syr.edu [128.230.205.140]) by hub.freebsd.org (Postfix) with ESMTP id B9C7215209 for ; Mon, 4 Oct 1999 13:03:15 -0700 (PDT) (envelope-from rhavyn@syru205-140.syr.edu) Received: (from rhavyn@localhost) by syru205-140.syr.edu (8.9.3/8.9.3) id QAA10492 for freebsd-questions@freebsd.org; Mon, 4 Oct 1999 16:00:04 -0400 Date: Mon, 4 Oct 1999 16:00:04 -0400 From: Chris Conrad To: freebsd-questions@freebsd.org Subject: Re: GNOME: Does anyone use it? Message-ID: <19991004160004.A10465@syru205-140.syr.edu> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="7JfCtLOvnd9MIVvH" X-Mailer: Mutt 1.0pre2i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --7JfCtLOvnd9MIVvH Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Hello, On Mon, Oct 04, 1999 at 03:25:49PM -0400, Brett Taylor wrote: > Hi, >=20 > On Mon, 4 Oct 1999, Chris Conrad wrote: >=20 > > Unfortunately, however, most of the major work on the GNOME occurs on > > Linux. I have a Redhat 6.1 box, and on that machine, I have never had > > the GNOME crash on me. I don't think I recal even having a GNOME app > > crash on me. On FreeBSD however, the GNOME is just miserable. >=20 > This is completely contrary to what I've heard - that Gnome is unstable > even on Linux. It may be _more_ stable on Linux (Red Hat in particular), > but I haven't heard glowing reviews of its stability anywhere. >=20 > Brett Again, this is from my own personal experience. I have tried the Gnome with Debian, SuSE, Redhat, and Mandrake. The only distribution that gave me any trouble was SuSE 6.1 and that was because it had an old version of the Gnome on it. Redhat, Debian and Mandrake have all worked flawlessly, particularly if you keep up with the patches. I have had alot of success with Gnome core 1.07 and Gnome libs 1.0.10. If anyone wants, I can get into some of the details of why the Gnome can be unstable, and how to fix some of it problems. Also AFAIK, version 1.0.50 will fix alot of the instability seen previously as well as allow for the framwork of 2.0. Again, if anyone would like some help, I'd be happy to provide what I can, and maybe point you in the right direction, please email me. Chris --7JfCtLOvnd9MIVvH Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.0 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE3+QdEpolY3ACeQwwRAQokAJwM1Vg7A2BLSeQm3jZ5z7MBnWfo8QCfX5rS wR0wHWe01CiDrYxgIxtMZsI= =DO9K -----END PGP SIGNATURE----- --7JfCtLOvnd9MIVvH-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:30:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id A9AAD14ED2 for ; Mon, 4 Oct 1999 13:30:26 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11YEkb-00077D-00; Mon, 4 Oct 1999 13:30:25 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id NAA20012; Mon, 4 Oct 1999 13:30:20 -0700 Date: Mon, 4 Oct 1999 13:30:20 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: GNOME: Does anyone use it? To: tbrock@mail.phoenix.net Cc: freebsd-questions@freebsd.org In-Reply-To: <99100408410801.37693@fdho-w5.fdnet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 4-Oct-99 at 06:41, Tony (tbrock@mail.phoenix.net) wrote: > I see many screenshots from the Linux community where people use this > glorified toolbar but from my experience, it's most reliable feature is > creating .core files. > > ... > > My question is this: Are any people in the FreeBSD community using the > GNOME port happily? Did I skip a fundamental /home/userdir setup script? > > > It's not important that I get it working, I just like to know why things > aren't working as they should. I've been using it for a while, and the basic functionality has been pretty stable. Some of the programs core dump on launch from the menu; but the basic panel doesn't crash on me. What I have noticed though is that it seems to be -very- sensitive about exactly which versions of the various support libraries are in use when you build it. When I've updated to new GNOME ports, I've found it best to track down all of the dependancy trees and update -everything- that has a newer version, or is dependant on something that has a newer version. And the only safe way I've found to do that is to uninstall the whole pile (and, of course, everything else that depends on any of the uninstalled packages); and then build it back from the ground up. I do this one port at a time instead of letting make handle the dependancies. (This is a big enough PITA that I don't upgrade that often. My last update was 9 July. I'll be trying the current versions in a few days when I upgrade the OS to 3.3.) Oh, and I'm also using the Gtk themes with it; which probably doesn't add to the stability... -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:39: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pau-amma.whistle.com (pau-amma.whistle.com [207.76.205.64]) by hub.freebsd.org (Postfix) with ESMTP id B6BBE1555D for ; Mon, 4 Oct 1999 13:38:42 -0700 (PDT) (envelope-from dhw@whistle.com) Received: (from dhw@localhost) by pau-amma.whistle.com (8.9.2/8.9.2) id NAA71045; Mon, 4 Oct 1999 13:38:04 -0700 (PDT) Date: Mon, 4 Oct 1999 13:38:04 -0700 (PDT) From: David Wolfskill Message-Id: <199910042038.NAA71045@pau-amma.whistle.com> To: chconrad@syr.edu Subject: Re: rc.local and comments Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <19991004160952.B10465@syru205-140.syr.edu> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >Date: Mon, 4 Oct 1999 16:09:52 -0400 >From: Chris Conrad >... >I have been using The Complete FreeBSD as my main guide to getting >things working (as well as a library of O'Reilly books for the >networking stuff). However, I see the file rc.local mentioned several >times in The Complete FreeBSD as a way to set up local services like >xdm. Usually it looks like this ># Put your local stuff here > >Unfortunately, that file doesn't appear to be on my system, and I have >no idea what is supposed to be above that line. Can anyone help me >out? If you poke around sufficiently in the freebsd-questions, -hackers, and -stable (maybe more) archives from the transition from FreeBSD 3.0-RELEASE to 3.1-R, you'll find that the way the "rc" customization was done has changed (though in a way that is compatible with the old style, generally). The file that "unlocks the secrets" is /etc/defaults/rc.conf -- but /etc/rc is still a shell script, and if you study it hard enough, you'll see that it refers to the defaults/rc.conf file. And you can still create an /etc/rc.local file; it's just not there (as you noted) by default, even as a placeholder that says # Put your local stuff here. The result of "man rc" should also be useful. I'll redirect the list address to -questions [though I have some misgivings about posting to a list I don't have time to read], because that is probably a better forum than -newbies for the topic at hand. Cheers, david -- David Wolfskill dhw@whistle.com UNIX System Administrator voice: (650) 577-7158 pager: (888) 347-0197 FAX: (650) 372-5915 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:41:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from breton.uol.com.br (breton.uol.com.br [200.230.198.74]) by hub.freebsd.org (Postfix) with ESMTP id 19E4A14EFC for ; Mon, 4 Oct 1999 13:41:52 -0700 (PDT) (envelope-from julianherrera@uol.com.br) Received: from etherial (200-191-20-57-as.acessonet.com.br [200.191.20.57]) by breton.uol.com.br (8.9.1/8.9.1) with SMTP id SAA24522 for ; Mon, 4 Oct 1999 18:41:30 -0200 (BRST) Message-ID: <012701bf0eb1$08838320$3914bfc8@etherial> From: "Julian Diego Herrera Braga" To: Subject: What about port redirection with ip aliasing ? Date: Mon, 4 Oct 1999 18:38:47 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello... One day my computer was without available ISA slots. I installed FreeBSD but the damned Winmodem doesn't work, so I had a idea to resurrect the other pentium 100 computer to use its free slots to install an old 14kbps modem. FreeBSD was also loaded in this computer as a gateway to the other computer without modem and the internet by ip aliasing (ppp -alias). Since the gateway computer doesn't have better space (170mb) and power to install some other programs, I would like to use it only for a gateway. My problems appeared when I tried to connect to the client computer from internet. Such connection always finished on the gateway computer. Finally, what I want to know is how can I get the gateway ports from telnetd, ftpd, httpd etc. redirected to the respective client ports. Basically, is something like to make the gateway computer invisible to the outside computers, so any connection addressed to its IP will finish into the client computer. Is this possible ? How ? Thank you for the attention. Regards, Julian Herrera mailto:julianherrera@uol.com.br To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:42:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from breton.uol.com.br (breton.uol.com.br [200.230.198.74]) by hub.freebsd.org (Postfix) with ESMTP id 2EA0014EFC for ; Mon, 4 Oct 1999 13:42:22 -0700 (PDT) (envelope-from julianherrera@uol.com.br) Received: from etherial (200-191-20-57-as.acessonet.com.br [200.191.20.57]) by breton.uol.com.br (8.9.1/8.9.1) with SMTP id SAA25242 for ; Mon, 4 Oct 1999 18:41:53 -0200 (BRST) Message-ID: <012a01bf0eb1$157a4c80$3914bfc8@etherial> From: "Julian Diego Herrera Braga" To: Subject: What about port redirection with ip aliasing ? Date: Mon, 4 Oct 1999 18:40:16 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello... One day my computer was without available ISA slots. I installed FreeBSD but the damned Winmodem doesn't work, so I had a idea to resurrect the other pentium 100 computer to use its free slots to install an old 14kbps modem. FreeBSD was also loaded in this computer as a gateway to the other computer without modem and the internet by ip aliasing (ppp -alias). Since the gateway computer doesn't have better space (170mb) and power to install some other programs, I would like to use it only for a gateway. My problems appeared when I tried to connect to the client computer from internet. Such connection always finished on the gateway computer. Finally, what I want to know is how can I get the gateway ports from telnetd, ftpd, httpd etc. redirected to the respective client ports. Basically, is something like to make the gateway computer invisible to the outside computers, so any connection addressed to its IP will finish into the client computer. Is this possible ? How ? Thank you for the attention. Regards, Julian Herrera mailto:julianherrera@uol.com.br To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:45:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id 3891215587 for ; Mon, 4 Oct 1999 13:44:11 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.199.38]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA5089; Mon, 4 Oct 1999 22:44:10 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id WAA96370; Mon, 4 Oct 1999 22:30:33 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 22:30:32 +0200 From: Jeroen Ruigrok/Asmodai To: Robert Blayzor Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-STABLE buildworld Message-ID: <19991004223032.E96050@daemon.ninth-circle.org> References: <199910041331.JAA20354@nimbus.superior.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <199910041331.JAA20354@nimbus.superior.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 16:00], Robert Blayzor (robert@superior.net) wrote: >make: don't know how to make crypt-md5.c. Stop Ruslan Ermilov reminded me of this by means of his commit. Try using secure-stable-supfile instead of stable-supfile. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best He who can, does. He who cannot, teaches. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:45:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from agora.neteze.com (agora.neteze.com [208.201.249.4]) by hub.freebsd.org (Postfix) with ESMTP id 367D41528C for ; Mon, 4 Oct 1999 13:45:26 -0700 (PDT) (envelope-from kc@neteze.com) Received: from admin1 ([208.201.249.51]) by agora.neteze.com (Post.Office MTA v3.5.3 release 223 ID# 0-62409U9000L900S0V35) with SMTP id com; Mon, 4 Oct 1999 13:49:39 -0700 Message-ID: <02d101bf0ea9$bde11550$33f9c9d0@neteze.com> From: "Kelsey Cummings" To: "Kenneth Wayne Culver" , "Ian Diddams" Cc: "freebsd-questions@freebsd.org" References: Subject: Re: More sound blaster 16 Date: Mon, 4 Oct 1999 13:47:58 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I had similar problems and decieded that it would be better to just buy OSS for freeBSD. Its great to see a company providing commercial products for FreeBSD, we should put our money where our mouths are and buy them so they and others continue to produce them. :) OSS works very well. ----------------------------------------------------------------- Kelsey Cummings System Administrator NetEase, Inc. kc@neteze.com ----------------------------------------------------------------- ----- Original Message ----- From: Kenneth Wayne Culver To: Ian Diddams Cc: freebsd-questions@freebsd.org Sent: Monday, October 04, 1999 12:45 PM Subject: Re: More sound blaster 16 > > > I've a SB16 that works perfectly fine with Win98. > > > > However, under FBSD 3.2, it makes not a joty of sound, and the only > > clues I have are the KDE (as my windowmanager) midi-player complaining > > of "ERROR - Can't open Output Device". > > > > kernel config looks fine - > > > > controller snd0 > > device sb0 at isa? port 0x220 irq 5 drq 1 vector sbintr > > device sbxvi0 at isa? drq 5 > > device sbmidi0 at isa? port 0x330 > > device opl0 at isa? port 0x388 conflicts > > device pca0 at isa? port IO_TIMER1 tty > > > > > > Actually no it doesn't, get rid of the last line. > > > > > dmesg output is fine - > > > > Oct 4 14:52:51 saul /kernel: sb0 at 0x220 irq 5 drq 1 on isa > > Oct 4 14:52:51 saul /kernel: snd0: > > Oct 4 14:52:51 saul /kernel: sbxvi0 at drq 5 on isa > > Oct 4 14:52:51 saul /kernel: snd0: > > Oct 4 14:52:51 saul /kernel: sbmidi0 at 0x330 on isa > > Oct 4 14:52:51 saul /kernel: snd0: > > Oct 4 14:52:51 saul /kernel: opl0 at 0x388 on isa > > Oct 4 14:52:51 saul /kernel: snd0: > > > > > > Any further ideas anybody? > > > > > HAve you done a MAKEDEV snd0 in /dev? do this: > > cd /dev > sh MAKEDEV snd0 > > and then try sound again. > > > > > -- > > Didds > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:45:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.HiWAAY.net (fly.HiWAAY.net [208.147.154.56]) by hub.freebsd.org (Postfix) with ESMTP id E4A361528C; Mon, 4 Oct 1999 13:45:51 -0700 (PDT) (envelope-from kris@airnet.net) Received: from airnet.net (tc14-216-180-35-108.dialup.HiWAAY.net [216.180.35.108] (may be forged)) by mail.HiWAAY.net (8.9.1a/8.9.0) with ESMTP id PAA15338; Mon, 4 Oct 1999 15:45:11 -0500 (CDT) Message-ID: <37F911D6.6CA5BCA4@airnet.net> Date: Mon, 04 Oct 1999 15:45:10 -0500 From: Kris Kirby Organization: Non Illegitemus Carborundum. X-Mailer: Mozilla 4.08 [en] (X11; U; FreeBSD 3.2-RELEASE i386) MIME-Version: 1.0 To: Leif Neland Cc: hackers@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Fetch/wget/ftp: How to do a recursive ftp-get? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Why is this cross-posted? Leif Neland wrote: > > But which tool can do a command-line, recursive ftp-get? wget can't, > because it does not create subdirs below the one specified, i.e. if I do > a wget -r ftp://webmaster:password@webserver.my.dom/htdocs/tree, it will > create the dir webserver.my.dom/htdocs/tree, but not any subdomains to > that. > > Leif wget -r -m --follow-ftp -T timeout_seconds -c "URL_HERE" I know as I do. -- Kris Kirby ------------------------------------------- TGIFreeBSD... 'Nuff said. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:54:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f173.law4.hotmail.com [216.33.149.173]) by hub.freebsd.org (Postfix) with SMTP id E874014D73 for ; Mon, 4 Oct 1999 13:54:50 -0700 (PDT) (envelope-from ohahx@hotmail.com) Received: (qmail 99116 invoked by uid 0); 4 Oct 1999 20:54:50 -0000 Message-ID: <19991004205450.99115.qmail@hotmail.com> Received: from 195.163.225.129 by www.hotmail.com with HTTP; Mon, 04 Oct 1999 13:54:49 PDT X-Originating-IP: [195.163.225.129] From: "Stefan Boy" To: freebsd-questions@FreeBSD.ORG Subject: Cant see mousepointer in Xwindows Date: Mon, 04 Oct 1999 13:54:49 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Just installed FreeBSD. One problem thou, i cant see the mouse pointer in Xwindows, when i click the mouse button i only get a box with lines in it, and it moves around when i move the mouse... Whats wrong ? The screen seem to flicker alittle when i use 1240*768, but not when i use 800*600 how come ? Thanks. ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:56:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cobalt.novagate.net (cobalt.novagate.net [205.138.138.17]) by hub.freebsd.org (Postfix) with ESMTP id BB9AC14A2D for ; Mon, 4 Oct 1999 13:56:51 -0700 (PDT) (envelope-from xlogan@novagate.net) Received: from cobalt (IDENT:xlogan@cobalt [205.138.138.17]) by cobalt.novagate.net (8.9.2/8.8.7) with SMTP id RAA19824 for ; Mon, 4 Oct 1999 17:06:20 -0400 (EDT) Date: Mon, 4 Oct 1999 17:06:20 -0400 (EDT) From: x@asdf.com X-Sender: xlogan@cobalt.novagate.net To: freebsd-questions@FreeBSD.ORG Subject: recursive cat weirdness Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! A co-worker found something interesting today by accident. He tried it on a FreeBSD 1.2.6 machine, and i just tried it on my 3.3 machine. You make two files that can have as many lines as you want. Just one line of garbage will do. Then you cat file1 file2 > file2 it just hangs and starts eating CPU. Then after you Ctrl C out and check, the file2 has gotten huge (well, at least if you let it run long enough). I tried this on a version of Linux and it wouldn't let me by saying something like "output file is input file". I guess this is not a big deal but if someone wanted to be a jerk they could just make two little files and eat up your disk space and CPU until you noticed it running. -Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 13:58: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-11.mail.nl.demon.net [194.159.73.21]) by hub.freebsd.org (Postfix) with ESMTP id 5DE8A14CDE for ; Mon, 4 Oct 1999 13:57:58 -0700 (PDT) (envelope-from marc@oldserver.demon.nl) Received: from [212.238.105.241] (helo=mistress) by post.mail.nl.demon.net with esmtp (Exim 2.12 #1) id 11YFCR-0003Q5-00; Mon, 4 Oct 1999 20:59:11 +0000 Date: Mon, 4 Oct 1999 22:57:26 +0200 (CEST) From: Marc Schneiders To: Ilia Chipitsine Cc: Kent Stewart , Oleg Ogurok , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Ilia Chipitsine wrote: > -----BEGIN PGP SIGNED MESSAGE----- > > On Sun, 3 Oct 1999, Kent Stewart wrote: > > > > > > > Anyway, there are 386 PC's which simply can't store more RAM or which > > > have 4 * 1 MB and would need 4 * 4 MB, costing $ 50 (in my country). It > > > would be nice if these old PC's were usable, esp. for people to try > > > FreeBSD. You cannot, of course, sacrifice anything useful for that reason. > > > It would be nice though, if possible. > > > > The problem is the response of such a system. They could think FreeBSD > > is terrible and it is really their lack of RAM. If you advertise such > > a system, you also have to warn about the possible lack of > > performance. > > I have a spare system, which is exactly Intel 386DX-33 (overclocked to > 40MHz) with 4Mb of RAM. I'd happy to built a system which will work > 24-hours only as E-mail/new/FIDO gateway. Perfomance _is_ acceptable. I > have a 28.8K modem for dialing out. My experience proves that 386DX-40 > can handle 4 x 115200 NUL-modems + 10Mb Ethernet (well, it was Linux > RH-5.0 boxen running as IPX <-> IP <-> IPX gateway). > > I think that my 386 boxen will stay without any use ... > Anybody knows, is it possible to install NetBSD/OpenBSD on 4Mb of RAM ?! > [...] It isn't possible :-( Our only relief is 2.1.7.1. That works and installs ok on 4 MB. Marc -- Marc Schneiders marc@venster.nl marc@oldserver.demon.nl To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:10:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 7A02A14CD0 for ; Mon, 4 Oct 1999 14:09:01 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 402 invoked from network); 4 Oct 1999 19:40:56 -0000 Received: from unknown (HELO tim) (192.168.1.5) by cache.ima-info.ro with SMTP; 4 Oct 1999 19:40:56 -0000 From: "Ion Mihai Tetcu" To: questions@freebsd.org Date: Mon, 4 Oct 1999 23:38:59 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: FreeBSD-Server, Win98-Client Reply-To: itetcu@go.ro Cc: "Michael Akers" X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991004211021.7A02A14CD0@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi everyone, I am supposed to set up a little network with a FreeBSD on the server and 5 win98 clients plus some Compaq laptops. I ask you for any advice that you can give me, since I don`t have much experience with FreeBSD on a net and especially a mixt one. The machines are: Server: Case: Midi Tower Case CLIO-I M-200A, TUV, 230W, ATX MB: Dual PII - ATX-P640D-A5, 440BX, 1 ISA, 5 PCI, 1 AGP, Teckram SCSI Adaptor: PCI Ultra Wide controler Teckram DC-390U/F Net card: 3 COM Fast EtherLink XL PCI 10/100 Mb Base Tx Processor: Intel PII 350 MHz, 512 L2 cache Ram: 64 Mb DIMM, 168pins, SDRAM, EEPROM, 100 MHz FDD: 33.5``, 1.44 Mb Samsung HDD: 9.1 Gb Fujitsu MAB3091SP Ultra Wide SCSI-3 CD-ReWritable Drive: 4X/2X/6X Yamaha CRW4261t Video Card: SVGA Card SIS 6215, PCI, 2Mb, 64 bit Monitor: SVGA color Goldstar 57m, 15``, 0.28, LR NI 1280X1024, DD, MM Keyboard: AT, US Layout, Win95 keys, 104 keys Mouse: 3 buttons Printers: HP DeskJet 1120C, HP 6L Xerox5815 Clients: Case: Midi Tower Case CLIO-I M-200A, TUV, 230W, ATX MB: PII ATX-P6B40-A4X, 440BX, 3 ISA, 4 PCI, 1 AGP, 4 Slots X 186, 100 Mhz, Teckram Net card: 3 COM Fast EtherLink XL PCI 10/100 Mb Base Tx NIC 3C90B-Tx Processor: Intel PII 350 MHz, 512 L2 cache Ram: 32 Mb DIMM, 168pins, SDRAM, EEPROM, 100 MHz FDD: 33.5``, 1.44 Mb Samsung HDD: 4.3 Gb Western Digital Caviar AC-24300, 3.5``, Ultra-DMA CD-ROM Drive: 32X Samsung CD-ROM SCR-3232 Video Card: SVGA Card Trident AGP, 4Mb SGRAM Monitor: SVGA color Goldstar 57m, 15``, 0.28, LR NI 1280X1024, DD, MM Keyboard: PS2 Samsung SEM-DC8L/W95, 104 KEYS, US Layout Mouse: 3 buttons Questions: 1. Is all the hardware supported ? Do i have to rebuild the kernel for 2 processors (and how) ? 2. Can you point me to some good (for a beginner) Samba resources? 3. We will have a dial-up connection to the ISP, and I want the server to be able to dial when someone on the win98 boxes want to connect. 4. Depends on the user of the win98 boxes, the connection will/won`t be done or it will be done between, let`s say 23h and 7 h . 5. The server will check the ISP for new mail every 2 h. 6. How can i record the IP addresses that the users acces from the win98 boxes ? We want to see if he`s gest playing around on the net or he is also doing some work. 7. Tell me about your favorite (free) HTML editor under FreeBSD. Untill now I`ve worked with Netscape, HomeSite, HotMetalPro and Notepad for the web design and i would like to swich under FreeBSD for the web design work. Merci for the answers, wish you the best, Ionut Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:12:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 3EE2B14A1A for ; Mon, 4 Oct 1999 14:12:09 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.197.102]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB2344; Mon, 4 Oct 1999 23:12:08 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id XAA96757; Mon, 4 Oct 1999 23:00:31 +0200 (CEST) (envelope-from asmodai) Date: Mon, 4 Oct 1999 23:00:31 +0200 From: Jeroen Ruigrok/Asmodai To: Kenneth Wayne Culver Cc: "Erik S. Carlsten" , freebsd-questions@FreeBSD.ORG Subject: Re: Diamond Monster Sound MX300 Message-ID: <19991004230031.F96050@daemon.ninth-circle.org> References: <19991004154620.D63946@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 22:44], Kenneth Wayne Culver (culverk@wam.umd.edu) wrote: >I would be glad to help test the Aureal Vortex 1 chip, the Diamond Monstor >sound has the Aureal Vortex II chip, or the 8830, while the vortex 1 has >the 8820. CURRENT has support for the 8820. So if it still needs testing you will have to move to CURRENT. And I don't know if you want nor if it would be desirable to do so. CURRENT _is_ developer's material and you should know how to get things done somewhat more individual. HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best What's in a name? That which we call a rose by any other name would smell as sweet. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:17:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from broccoli.graphics.cornell.edu (broccoli.graphics.cornell.edu [128.84.247.53]) by hub.freebsd.org (Postfix) with ESMTP id 024A815159 for ; Mon, 4 Oct 1999 14:16:58 -0700 (PDT) (envelope-from mkc@Graphics.Cornell.EDU) Received: from graphics.cornell.edu (localhost.graphics.cornell.edu) by broccoli.graphics.cornell.edu with ESMTP (1.37.109.16/16.2) id AA080751651; Mon, 4 Oct 1999 17:14:12 -0400 Message-Id: <199910042114.AA080751651@broccoli.graphics.cornell.edu> X-Mailer: exmh version 2.0zeta 7/24/97 To: "Nathaniel Schein" Cc: "Freebsd Questions" Subject: Re: rpc.yppasswdd In-Reply-To: Your message of "Mon, 04 Oct 1999 11:50:02 PDT." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 17:14:11 -0400 From: Mitch Collinsworth Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >I have nis_yppasswdd_enable="YES" in the 'rc.conf' of the nis master and >when I reboot the server the following error message appears: > >Doing additional network setup: named portmap ypserv >rpc.yppasswddrpc.yppasswdd: > can't get name of NIS master server for domain prisa.com It sounds like something is wrong with your master.passwd map. Does it already exist or are you just getting started and haven't created it yet? The reason I ask is because the name of the master for each map is encoded in the map itself. If the program can't find the master's name it would seem like you need to rebuild the maps and push the new copies to all slave servers. -Mitch To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:21:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from plains.NoDak.edu (plains.NoDak.edu [134.129.111.64]) by hub.freebsd.org (Postfix) with ESMTP id 6CDEF1550C for ; Mon, 4 Oct 1999 14:21:48 -0700 (PDT) (envelope-from tinguely@plains.NoDak.edu) Received: (from tinguely@localhost) by plains.NoDak.edu (8.9.3/8.9.3) id QAA09151; Mon, 4 Oct 1999 16:21:47 -0500 (CDT) Date: Mon, 4 Oct 1999 16:21:47 -0500 (CDT) From: Mark Tinguely Message-Id: <199910042121.QAA09151@plains.NoDak.edu> To: freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org, s.mitchell@computer.org Subject: Re: HP printers & FreeBSD? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Anyway, looking through the > specs for the current crop of Deskjets, many of them apparently use > something called 'Printing Performance Architecture' -- these also seem to > be the models that don't even offer Mac support, so I assume the 'Printing > Performance Architecture' is some kind of poxy WinPrinter thing that is > best avoided. All is not lost, Tim Norman has reverse engineered the PPA instructions, and has written a program that supposedly gives Unix support the these printers. For program and download information, see: http://www.rpi.edu/~normat/technical/ppa/ --mark. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:25:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.wolves.k12.mo.us (mail.wolves.k12.mo.us [207.160.214.1]) by hub.freebsd.org (Postfix) with ESMTP id C70E3152B8 for ; Mon, 4 Oct 1999 14:24:24 -0700 (PDT) (envelope-from cdillon@wolves.k12.mo.us) Received: from mail.wolves.k12.mo.us (cdillon@mail.wolves.k12.mo.us [207.160.214.1]) by mail.wolves.k12.mo.us (8.9.3/8.9.2) with ESMTP id QAA32836; Mon, 4 Oct 1999 16:24:17 -0500 (CDT) (envelope-from cdillon@wolves.k12.mo.us) Date: Mon, 4 Oct 1999 16:24:17 -0500 (CDT) From: Chris Dillon To: Scott Mitchell Cc: freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? In-Reply-To: <19991004164348.B360@lungfish.freeserve.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Scott Mitchell wrote: > Having given in to my SO's nagging and decided to buy a new printer, my > next task is to make sure it works with our favourite OS before handing > over the cash... The printer in question will probably be from HP simply > because I've never owned/used one that gave me any trouble, whereas the > same cannot be said for certain others :-( Anyway, looking through the > specs for the current crop of Deskjets, many of them apparently use > something called 'Printing Performance Architecture' -- these also seem to > be the models that don't even offer Mac support, so I assume the 'Printing > Performance Architecture' is some kind of poxy WinPrinter thing that is > best avoided. The rest of the range talks PCL Level 3 which I believe is > fine for tools such as GhostScript et. al. > > Any confirmation that these are valid assumptions would be appreciated. > Please cc: to me as I'm not subscribed to -questions these days. From my own experience, your assumptions are definately valid. I've never figured out HP's screwy model numbering system, but at one time I thought that anything with an odd second number was not a WinPrinter. However, a few even-numbered printers are not WinPrinters, so that blew that idea out the window. I'm not entirely sure why they think they need to have 200 different models of printers to choose from, either, with seemingly no differences between one model and the next. Enough ranting... I have an 870Cse at home, and it works wonderfully. Here at work, I have an 895Cse sitting in the corner attached to a JetDirect box, and it basically just has better output than my 870 and is a tad speedier. Just about anything in the 8xx series of printers should work nicely and have great print output. Some of the lower series printers still do speak PCL, but their print output and speed isn't nearly as good. You'd better check HP's website and look at the specs of the printer you want to make real it at least speaks PCL. Anything that only speaks "Printing Performance Architecture" is definately a lowly WinPrinter. We got stuck with a couple of those and didn't realize it until we couldn't print from one of our old DOS apps that only speaks PCL. -- Chris Dillon - cdillon@wolves.k12.mo.us - cdillon@inter-linc.net FreeBSD: The fastest and most stable server OS on the planet. For Intel x86 and Alpha architectures (SPARC under development). ( http://www.freebsd.org ) "One should admire Windows users. It takes a great deal of courage to trust Windows with your data." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:26:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from viper.lovett.com (viper.lovett.com [216.60.121.173]) by hub.freebsd.org (Postfix) with ESMTP id 8B25E1549B for ; Mon, 4 Oct 1999 14:26:30 -0700 (PDT) (envelope-from ade@lovett.com) Received: from ade by viper.lovett.com with local (Exim 3.03 #1) id 11YFcc-000HUD-00; Mon, 04 Oct 1999 16:26:14 -0500 Date: Mon, 4 Oct 1999 16:26:14 -0500 From: Ade Lovett To: patl@phoenix.volant.org Cc: freebsd-questions@freebsd.org Subject: Re: GNOME: Does anyone use it? Message-ID: <19991004162614.H65863@lovett.com> References: <99100408410801.37693@fdho-w5.fdnet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, Oct 04, 1999 at 01:30:20PM -0700, patl@phoenix.volant.org wrote: > > [snip] > > I do this one port at a time instead of > letting make handle the dependancies. (This is a big enough PITA > that I don't upgrade that often. My last update was 9 July. I'll > be trying the current versions in a few days when I upgrade the OS > to 3.3.) I'd suggest that you hold off doing an update for a short while. The GNOME folks are almost ready to release a 1.0.50 version (initially scheduled for end of September), and a number of us are working on the necessary port updates (by my reckoning there are no less than 23 ports that have to be updated). This particular GNOME update is going to be even more messy (if that were possible :) than the last few, since glib/gtk+ have to be updated to 1.2.5 for gnome-core (and ports that depend on it) to work. Which means an awful lot of package deleting and recompiling/adding. Regarding stability, I've found FreeBSD GNOME to be about the same as running under Linux (RedHat 5.2) -- during the bigger updates, I tend to run two systems side by side (admittedly as virtual hosts under VMWare/NT). Of course, as with everything, if people don't know about the problems, then it becomes that much more difficult to fix them, either with GNOME itself, or the FreeBSD ports thereof. Things are compounded for non-Linux people by GNOME's horribly (in some places) Linux-centric nature (take a peek at the size of some of the patches in /usr/ports to see what I mean). We try extremely hard not to introduce any further problems in the porting process, but GNOME is absolutely huge, and RealJobs[tm] tend to get in the way. -aDe -- Ade Lovett, Austin, TX. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 14:47:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id EFC3615043 for ; Mon, 4 Oct 1999 14:46:48 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 11652 invoked from network); 4 Oct 1999 20:47:49 -0000 Received: from unknown (HELO tim) (192.168.1.3) by cache.ima-info.ro with SMTP; 4 Oct 1999 20:47:49 -0000 From: "Ion Mihai Tetcu" To: freebsd-questions@FreeBSD.ORG Date: Tue, 5 Oct 1999 00:45:33 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: [Q] FreeBSD&Mac Reply-To: itetcu@go.ro X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991004214656.EFC3615043@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Is there any way to cp files from/to a Mac floppy ? If not how can it be done under DOS ? Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 15:53:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id 8789114FB7 for ; Mon, 4 Oct 1999 15:53:21 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11YGys-0000Zm-00; Mon, 4 Oct 1999 15:53:18 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id PAA20054; Mon, 4 Oct 1999 15:53:10 -0700 Date: Mon, 4 Oct 1999 15:53:10 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: GNOME: Does anyone use it? To: Ade Lovett Cc: freebsd-questions@freebsd.org In-Reply-To: <19991004162614.H65863@lovett.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 4-Oct-99 at 14:26, Ade Lovett (ade@lovett.com) wrote: > On Mon, Oct 04, 1999 at 01:30:20PM -0700, patl@phoenix.volant.org wrote: > > > > [snip] > > > > I do this one port at a time instead of > > letting make handle the dependancies. (This is a big enough PITA > > that I don't upgrade that often. My last update was 9 July. I'll > > be trying the current versions in a few days when I upgrade the OS > > to 3.3.) > > I'd suggest that you hold off doing an update for a short while. > > The GNOME folks are almost ready to release a 1.0.50 version (initially > scheduled for end of September), and a number of us are working on the > necessary port updates (by my reckoning there are no less than 23 ports > that have to be updated). I saw some notes about that in the -ports list. I've been kind of hoping that the ports updates would be committed before I'm ready to do the 3.3 install. I just sort of forgot about that detail until after I'd sent my previous message. > This particular GNOME update is going to be even more messy (if that > were possible :) than the last few, since glib/gtk+ have to be updated > to 1.2.5 for gnome-core (and ports that depend on it) to work. > > Which means an awful lot of package deleting and recompiling/adding. The last time I did a GNOME update, I had to delete it down to that level. It is a -huge- pain, primarily because it basicly drags me down to the ASCII console level during the delete and rebuild. Life would be so much easier if FreeBSD could properly handle updating installed packages. (The biggest problem is that you can't safely delete the old package because it won't recognize which files shouldn't be deleted because they are still in use by the new version.) > Regarding stability, I've found FreeBSD GNOME to be about the same > as running under Linux (RedHat 5.2) -- during the bigger updates, I > tend to run two systems side by side (admittedly as virtual hosts > under VMWare/NT). VMWare sounds interesting; but even that isn't enough to get me to run NT. What I'd really like to see would be an Open Source system that is conceptually closer to the old IBM VM/370 design. It could use drivers and much of the kernel from *BSD, Linux, or whatever. But instead of running on top of another OS, it should be the kernel; and it should -not- support running programs directly, only virtual machines. Add a mechanism to allow VM-aware OSes to communicate with the VM and delegate certain operations (e.g. paging) to it, and you've got an ideal system for multi-os or multiple virtual host operations. But I digress... > Of course, as with everything, if people don't know about the problems, > then it becomes that much more difficult to fix them, either with > GNOME itself, or the FreeBSD ports thereof. I confess to not submitting bug reports for the few problems that I've had. My only defense is that I haven't had the cycles to track them down to the point where I would have sufficient details to be useful. > Things are compounded for non-Linux people by GNOME's horribly > (in some places) Linux-centric nature (take a peek at the size of > some of the patches in /usr/ports to see what I mean). Yes, I know. I find it particularly irritating since traditionally portability has been a high-order bit for GNU projects. But in the last few years there seems to be a growing body of engineers that equate GNU with Linux; because Linux is so dependant on GNU tools. They just haven't recognized that 'A implies B' does not mean that 'B implies A'. How open are they to rolling portability patches back into the master source? > We try extremely hard not to introduce any further problems in the > porting process, but GNOME is absolutely huge, and RealJobs[tm] tend > to get in the way. Tell me about it. Keeping income flowing and still maintaining something resembling a Life has been keeping me from contributing the way I'd like to. -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:33:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f91.law3.hotmail.com [209.185.241.91]) by hub.freebsd.org (Postfix) with SMTP id B2E1514C81 for ; Mon, 4 Oct 1999 16:33:00 -0700 (PDT) (envelope-from dacster69@hotmail.com) Received: (qmail 13776 invoked by uid 0); 4 Oct 1999 23:32:59 -0000 Message-ID: <19991004233259.13775.qmail@hotmail.com> Received: from 203.29.147.98 by www.hotmail.com with HTTP; Mon, 04 Oct 1999 16:32:55 PDT X-Originating-IP: [203.29.147.98] From: "David Cook" To: freebsd-questions@freebsd.org Subject: Multiple Default Routes !!! Date: Tue, 05 Oct 1999 09:32:55 EST Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm really hoping that some kind soul will have a look at this problem for me ... I've posted this twice now with absolutely ** zero ** response. Anyway ... third time lucky ... I'm having a problem with the route command in FreeBSD 3.1: I have multiple branches connected to our Head Office via TCP/IP using the private IP Class C ranges 192.168.X. as follows: IP Range: Branch: Router: 192.168.1 Head Office 192.168.1.15 192.168.2 Branch2 192.168.2.15 . . 192.168.26 Branch26 192.168.26.15 I have added a freeBSD box to Branch26 to act as a file & print server to Windows clients via Samba. It was originally set up with a default route of 192.168.26.15 which is the router that connects the branch to Head Office. So far so good ... I can telnet into this machine from any other subnet including my home subnet of 192.168.77, which connects to Head Office via ppp. I now need to use the freebsd box to provide internet access to Branch26 only (other branches will gain access to the 'net via Head Office ... don't ask, it's political) which means I need a *static* non-default route for 192.168.0.0 via the 192.168.26.15 router, and a default route for all other traffic via the dynamic PPP link on the freebsd box. I am having trouble with the static route, even before trying to set up ppp. Here's what I tried ... bash-2.02# uname -a FreeBSD b26bsd.ahca.com.au 3.1-RELEASE FreeBSD 3.1-RELEASE #0: Mon Feb 15 11:08: 08 GMT 1999 jkh@usw3.freebsd.org:/usr/src/sys/compile/GENERIC i386 bash-2.02# netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.26.15 UGSc 3 1 ed1 127.0.0.1 127.0.0.1 UH 0 2 lo0 192.168.26 link#1 UC 0 0 ed1 192.168.26.15 0:90:27:72:a4:ba UHLW 3 0 ed1 1177 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 bash-2.02# route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 1 add net 192.168: gateway 192.168.26.15 bash-2.02# netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.26.15 UGSc 1 0 ed1 => default 192.168.26.15 UGSc 3 1 ed1 127.0.0.1 127.0.0.1 UH 0 2 lo0 192.168.26 link#1 UC 0 0 ed1 192.168.26.15 0:90:27:72:a4:ba UHLW 4 0 ed1 1058 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 I get *two* default routes!!! I cannot seem to delete the original without a "route flush", which kills my telnet session from home, and leaves no default route at all. (I telnet into the router at Branch26, and then from the router to the freebsd box to fix the routing table, if you are wondering) I've tried a number of other combinations, with and without the -netmask parameter, all with the dual default result. I have done this before with both SCO OpenServer & Linux, so I believe my theory is correct ... obviously I am missing something simple. TIA David Cook Information Services Manager Latrobe Health Services 32 McDonald Street Morwell Victoria 3840 Australia email:dacster69@hotmail.com ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:35: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp10.atl.mindspring.net (smtp10.atl.mindspring.net [207.69.200.246]) by hub.freebsd.org (Postfix) with ESMTP id 48DDA14C81 for ; Mon, 4 Oct 1999 16:34:57 -0700 (PDT) (envelope-from stech4@mindspring.com) Received: from t6r1h9 (user-38ldj41.dialup.mindspring.com [209.86.204.129]) by smtp10.atl.mindspring.net (8.8.5/8.8.5) with SMTP id TAA01693 for ; Mon, 4 Oct 1999 19:34:55 -0400 (EDT) From: stech4@mindspring.com Message-ID: <000801bf0ec0$b06e6dc0$81cc56d1@t6r1h9> To: Subject: e-mail server Date: Mon, 4 Oct 1999 16:32:12 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01BF0E86.02B6BC80" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01BF0E86.02B6BC80 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable What e-mail servers does freeBSD has and which one is good? thanks a lot Travis ------=_NextPart_000_0005_01BF0E86.02B6BC80 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
What e-mail servers does freeBSD has and which one = is=20 good?
 
thanks a lot
Travis
------=_NextPart_000_0005_01BF0E86.02B6BC80-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:39: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp11.bellglobal.com (smtp11.bellglobal.com [204.101.251.53]) by hub.freebsd.org (Postfix) with ESMTP id 2F48B15161 for ; Mon, 4 Oct 1999 16:38:56 -0700 (PDT) (envelope-from willwong@anime.ca) Received: from mail.anime.ca (HSE-TOR-ppp25616.sympatico.ca [209.226.82.113]) by smtp11.bellglobal.com (8.8.5/8.8.5) with ESMTP id TAA08664 for ; Mon, 4 Oct 1999 19:42:40 -0400 (EDT) Received: from localhost (willwong@localhost) by mail.anime.ca (8.9.3/8.9.3) with ESMTP id TAA12429 for ; Mon, 4 Oct 1999 19:38:53 -0400 (EDT) (envelope-from willwong@anime.ca) Date: Mon, 4 Oct 1999 19:38:53 -0400 (EDT) From: William Wong To: freebsd-questions@freebsd.org Subject: encryption method on master.passwd Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hey, How do I know which type of encryption my system is using. I just installed a 3.3R System and it looks like the length of the password field for one of my users is shorter than on my old 3.2R system. On the 3.2 system I did not install the DES distribution while on the 3.3 system I did. If I am using a different method than my 3.2 system, which one is more secure? - Will To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:43:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freeside.fc.net (freeside.fc.net [207.170.70.2]) by hub.freebsd.org (Postfix) with ESMTP id A524E14F5F for ; Mon, 4 Oct 1999 16:42:35 -0700 (PDT) (envelope-from jdunham@freeside.fc.net) Received: (from jdunham@localhost) by freeside.fc.net (8.9.3/8.8.8) id SAA64758; Mon, 4 Oct 1999 18:42:11 -0500 (CDT) From: Jerry Dunham Message-Id: <199910042342.SAA64758@freeside.fc.net> Subject: VMWare and friends (was: Re: GNOME: Does anyone use it?) In-Reply-To: from "patl@phoenix.volant.org" at "Oct 4, 1999 03:53:10 pm" To: patl@phoenix.volant.org Date: Mon, 4 Oct 1999 18:42:11 -0500 (CDT) Cc: ade@lovett.com (Ade Lovett), freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG patl@phoenix.volant.org babbled: > Date: Mon, 4 Oct 1999 15:53:10 -0700 (PDT) > To: Ade Lovett > On 4-Oct-99 at 14:26, Ade Lovett (ade@lovett.com) wrote: > > > Regarding stability, I've found FreeBSD GNOME to be about the same > > as running under Linux (RedHat 5.2) -- during the bigger updates, I > > tend to run two systems side by side (admittedly as virtual hosts > > under VMWare/NT). > > VMWare sounds interesting; but even that isn't enough to get me to > run NT. What I'd really like to see would be an Open Source system > that is conceptually closer to the old IBM VM/370 design. It could > use drivers and much of the kernel from *BSD, Linux, or whatever. > But instead of running on top of another OS, it should be the kernel; > and it should -not- support running programs directly, only virtual > machines. Add a mechanism to allow VM-aware OSes to communicate > with the VM and delegate certain operations (e.g. paging) to it, > and you've got an ideal system for multi-os or multiple virtual host > operations. But I digress... But it's a digression I LIKE. Are you and I the only ones on this list who salivate at such thoughts? I WANT a system like that! -- Jerry Dunham FreeBSD Atarian ordinaire jdunham@fc.net (512)335-0674 (H) jdunham@avalanche.us.dell.com (512)728-4026 (O) E Pluribus Unix To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:44:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-56.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.56]) by hub.freebsd.org (Postfix) with ESMTP id 934C414DAA for ; Mon, 4 Oct 1999 16:44:26 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id AAA00870; Tue, 5 Oct 1999 00:16:07 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA01059; Mon, 4 Oct 1999 18:23:24 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041723.SAA01059@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: "J. Ryan Peters" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Multilink PPP Problem In-reply-to: Your message of "Thu, 30 Sep 1999 00:48:13 PDT." <4.2.0.58.19990930003918.00981f00@mail.asis.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 18:23:24 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > --=====================_3093506==_.ALT > Content-Type: text/plain; charset="us-ascii"; format=flowed > > Hi I'm running 3.2-Stable and I have my machine setup as a dial-on demand > router for PPP. It works fine with one link (asis). When I try to do > multilink (asismlppp) both links are brought up but it doesn't seem to add > the routes properly. Can someone send me a working ppp.conf w/multilink or > take a look at mine and see if you can tell me where I am going wrong? Thanks. > > ppp.conf: > > default: > set log Phase Chat LCP IPCP CCP tun command > set device /dev/cuaa1 > set speed 115200 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK > ATE1Q0s32=2 OK \\dATDT\\T TIMEOUT 40 CONNECT" > > asismlppp: > set login > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > set default HISADDR > set authname username > set authkey password > set mrru 1500 > set enddisc label > > > enable lqr > accept lqr > > clone 1,2 > link deflink remove > link 1,2 set mode ddial > link 1 set phone "6590155" > link 2 set phone "6590155" > link 1 set device /dev/cuaa1 > link 2 set device /dev/cuaa0 > link 1 set speed 115200 > link 2 set speed 115200 > > asis: > set phone 9432004|9431830|9433847|9431831 > set login > set authname username > set authkey password > set timeout 900 > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 > add default HISADDR > set server 6670 foobar > set log local LCP IPCP CCP > > -Ryan > --=====================_3093506==_.ALT > Content-Type: text/html; charset="us-ascii" > > [.....] Please don't post stuff in html :-/ Your config looks fine. How about posting a log with ``set log phase command lcp ipcp'' ? -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:45:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-56.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.56]) by hub.freebsd.org (Postfix) with ESMTP id 7458914DAA for ; Mon, 4 Oct 1999 16:44:26 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id AAA03748; Tue, 5 Oct 1999 00:18:38 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA01080; Mon, 4 Oct 1999 18:26:54 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041726.SAA01080@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Michael Kennett Cc: jcm@dogma.freebsd-uk.eu.org (J McKitrick), freebsd-questions@FreeBSD.ORG Subject: Re: ailing ppp connection....(still feeling like idiot ;-) In-reply-to: Your message of "Thu, 30 Sep 1999 20:13:10 +0800." <199909301213.UAA01311@laurasia.com.au> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 18:26:54 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG [.....] > $ route add default 10.65.44.64 [.....] This can also be done from within ppp using the (indented) line add default HISADDR This has the advantage of being able to set the route despite varying peer IP numbers. -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:47:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-56.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.56]) by hub.freebsd.org (Postfix) with ESMTP id 0E2DB15517 for ; Mon, 4 Oct 1999 16:47:03 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id AAA05733; Tue, 5 Oct 1999 00:22:24 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA00515; Mon, 4 Oct 1999 18:03:56 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041703.SAA00515@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Scott Mitchell Cc: freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? In-reply-to: Your message of "Mon, 04 Oct 1999 16:43:48 BST." <19991004164348.B360@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 18:03:56 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Having given in to my SO's nagging and decided to buy a new printer, my > next task is to make sure it works with our favourite OS before handing > over the cash... The printer in question will probably be from HP simply > because I've never owned/used one that gave me any trouble, whereas the > same cannot be said for certain others :-( Anyway, looking through the > specs for the current crop of Deskjets, many of them apparently use > something called 'Printing Performance Architecture' -- these also seem to > be the models that don't even offer Mac support, so I assume the 'Printing > Performance Architecture' is some kind of poxy WinPrinter thing that is > best avoided. The rest of the range talks PCL Level 3 which I believe is > fine for tools such as GhostScript et. al. > > Any confirmation that these are valid assumptions would be appreciated. > Please cc: to me as I'm not subscribed to -questions these days. FWIW, I agree with your philosophy. I can't claim to know anything about ``PPA'', but in my book, PostScript = best, pcl = good, anything else = bad :*I > Many TIA, > > Scott > > -- > =========================================================================== > Scott Mitchell | PGP Key ID |"If I can't have my coffee, I'm just > Cambridge, England | 0x54B171B9 | like a dried up piece of roast goat" > s.mitchell@computer.org | 0xAA775B8B | -- J. S. Bach. -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:47:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-56.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.56]) by hub.freebsd.org (Postfix) with ESMTP id DD4EA1554E for ; Mon, 4 Oct 1999 16:47:03 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id XAA02756; Mon, 4 Oct 1999 23:21:22 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA01115; Mon, 4 Oct 1999 18:34:03 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041734.SAA01115@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: DNS/ISP problem In-reply-to: Your message of "Fri, 01 Oct 1999 14:15:49 BST." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 18:34:03 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > OK, at least i am connected to ONE ISP (dad's ;-)... but it's > long-distance. I'm using it because it works with the scripts i have set > up. My ISP uses a different kind of authentication. AFter connecting with > ppp, i hit return and login manually. What do i do after that to start > things? Usually i just wait, but the connection doesn't work after than. > Hostname reoslution. I think it's the nameservers. I've heard some ISP's > don't let you leech off their nameservers if you didn't dial in to them. > Is there an easy way to switch between nameservers for different ISP's? > I remember seeing something about delete ALL, enable dns, stuff like that. > Am i on the right track? Yes, add ``enable dns'' to your ppp.conf file. You could also ``set log +ipcp'' (or ``set log local +ipcp'' for output to the ppp prompt) to ensure that the peer is agreeing to tell you the DNS IP numbers. If they don't, you'll need to add a command to ppp.linkup that modifies /etc/resolv.conf for you. > jcm -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:50: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-56.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.56]) by hub.freebsd.org (Postfix) with ESMTP id D990F15145 for ; Mon, 4 Oct 1999 16:47:03 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id XAA06219; Mon, 4 Oct 1999 23:26:25 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA01032; Mon, 4 Oct 1999 18:19:00 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041719.SAA01032@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Mark Hartley Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FW: PPP & security In-reply-to: Your message of "Wed, 29 Sep 1999 16:32:56 PDT." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 04 Oct 1999 18:18:57 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > I've followed the list for a few months (& searched through the mailing list > archive) and really couldn't find anything that answered my question, so here I > go: > > I've got a home network (FreeBSD, Win95, Mac: with hubs, cat5, etc.) that > currently connecting to the Internet via a FreeBSD 2.2.8-RELEASE machine (using > ppp -auto -alias ISP), and everything is working great. I stay connected for > 8-10 hours at a time (I work from home). > > My question is mostly related to the security of my network. I want to know if > the FreeBSD machine is providing adequate security for me. I've disabled > services I do not use on the machine. I'm going to be putting 3.2 STABLE on the > gateway machine next week. Should I worry about setting up IPFW & NATD? (is > this even possible with ppp?) > > Are there other things I should be doing? I realize on a dialup I'm kind of > like a moving target, but I stay on long enough that I want to make sure I'm > being careful. natd is exactly the same as the -alias flag to ppp, so you don't need both. WRT the firewall side of things you have three choices. You can use ipfw for the greatest flexibility, you can use the ``set filter'' commands within ppp for a similar sort of thing or you can use ``alias deny_incoming yes'' to simply deny incoming connections. > Thanks in advance. > > Mark. -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 16:50: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-56.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.56]) by hub.freebsd.org (Postfix) with ESMTP id 3A14C14DAA for ; Mon, 4 Oct 1999 16:47:03 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id XAA03178; Mon, 4 Oct 1999 23:23:54 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA01146; Mon, 4 Oct 1999 18:39:13 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910041739.SAA01146@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: gjukema@silk.net Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ppp gateway not passing "connected" to windows client In-reply-to: Your message of "Fri, 01 Oct 1999 17:30:11 PDT." <3.0.5.32.19991001173011.007cf9c0@silk.net> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Date: Mon, 04 Oct 1999 18:39:13 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Hi, > = > I've setup many ppp gateways in the past and for the first time I'm rea= lly > stumped. "ppp -auto -alias goonline" auto dials, and logs in fine; fro= m > the FreeBSD gateway I can browse, ping whatever and things are swell, e= ven > when initiating the connection from the windows browser. = > = > The problem is that the windows browser does not get notified that we h= ave > a connection, so it times-out; but here's the kicker; this only occurs = with > this particular ISP. With the same configuration, different ISP, usern= ame, > and password; things are perfect. Of course, clicking on the IE refresh= or > home or whatever, and it knows the connection is there - I've also trie= d > this with Netscape, and am experiencing the same results. Its definatel= y > somewhere during, or shortly after, ppp authentication. > = > The only difference in the log file between the ISP that works, and the= one > that doesn't are as follows: > = > ISP (sympatico) doesn't work: > ... > PAP_ACK (Selection: ^M ) > ... > = > ISP does work: > ... > PAP_ACK () > ... > = > Thanks in advance for any direction on this one, the configure and log > files follow. > = > Geoff Jukema > = > # PPP Configuration File > # > # $Id: ppp.conf.sample,v 1.5.2.12 1997/09/10 01:00:27 brian Exp $ > # > = > # Default setup. Always executed when PPP is invoked. > # > default: > set device /dev/cuaa1 > set speed 115200 > deny lqr > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK= > \\dATDT\\T TIMEOUT 40 CONNECT" > = > # > goonline: > set phone 9,14166811638 > set authname b1vcnl89 > set authkey mypassword > set timeout 300 > set openmode active > accept pap > set ifaddr 127.1.1.1/0 127.2.2.2/0 255.255.255.0 > add 0 0 127.2.2.2 Change this to ``add default HISADDR''. > # end of PPP Configuration File > = > **LOG START** > Oct 1 15:47:53 gecco ppp[1427]: Phase: PPP Started. = > Oct 1 15:47:58 gecco ppp[1427]: Phase: Phone: 9,14166811638 = > Oct 1 15:48:20 gecco ppp[1427]: Phase: *Connected! = > Oct 1 15:48:26 gecco ppp[1427]: Phase: NewPhase: Authenticate = > Oct 1 15:48:26 gecco ppp[1427]: Phase: his =3D c023, mine =3D 0 = [.....] Too old ! If you get a more recent version of ppp your problems will = go away. Your version of ppp doesn't support ``enable iface-alias''. = A more recent version will do this automatically. There's stuff in the FAQ about this. You can get the latest version of ppp via http://www.Awfulhak.org/ppp.html -- = Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 17:22:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ws74.webct.com (ws74.webct.com [209.87.17.104]) by hub.freebsd.org (Postfix) with ESMTP id 2054314BFD for ; Mon, 4 Oct 1999 17:22:30 -0700 (PDT) (envelope-from dfoo@ca.webct.com) Received: from ca.webct.com (localhost [127.0.0.1]) by ws74.webct.com (8.9.3/8.9.3) with ESMTP id RAA01444 for ; Mon, 4 Oct 1999 17:22:29 -0700 (PDT) (envelope-from dfoo@ca.webct.com) Message-ID: <37F944C5.42AFD597@ca.webct.com> Date: Mon, 04 Oct 1999 17:22:29 -0700 From: Darren Foo Reply-To: dfoo@ca.webct.com Organization: ULT Canada X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 3.2-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Reading MS Word files Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Are there any programs available for Windows that would serve as a X-server? I want to read MS Word and Office documents but MS support under unix has been lacking. I'm aware of the Netcenter Wincenter and Citrix Metaframe solution but that costs megabucks. Does anyone know of any alternatives? -- Darren Foo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 17:35:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 4795F151AB for ; Mon, 4 Oct 1999 17:35:22 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YIZd-000N4P-00; Tue, 5 Oct 1999 01:35:21 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id BAA14238 for ; Tue, 5 Oct 1999 01:35:20 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 01:35:20 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: i need a good advocacy list Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm looking for a good list where people discuss the pros/cons (preferably more pros ;-) of FreeBSD over Linux. I really like FreeBSD so far, and i'd like to know if there are any issues i am unaware of that could become important. I want to stay with FreeBSD if possible, but i want to be prepared to pay the price, if necessary. ANy thoughts on this? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 17:42:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from helios.kos.net (helios.kos.net [199.246.3.132]) by hub.freebsd.org (Postfix) with SMTP id 47DC615214 for ; Mon, 4 Oct 1999 17:41:37 -0700 (PDT) (envelope-from jennings@post.kosone.com) Received: (qmail 3390 invoked from network); 5 Oct 1999 00:45:16 -0000 Received: from mbv6-pl-ri41.kos.net (HELO oscar) (206.186.127.98) by helios.kos.net with SMTP; 5 Oct 1999 00:45:16 -0000 Message-Id: <4.2.0.58.19991004202356.00975b80@post.kosone.com> X-Sender: jennings@post.kosone.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Mon, 04 Oct 1999 20:42:25 -0400 To: freebsd-questions@FreeBSD.ORG From: Mike Jennings Subject: adaptec Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I just finally received the "FreeBSD Handbook" all 1500 + pages. Not cheap either, in Canada we are paying over $100.00 dollars for this book. It comes with 4 cd's containing FreeBSD 3.1 version. The installation went great, installed the complete version onto a P233, 2.5 Gb EIDE HD, S3 video card and last but not least is the Adaptec 1520 connecting a HP 2Gb 35470A DAT tape backup. My question, read the book and followed the Kernel howto section. Adjusted the GENERIC file and added the aic0 controller subsection. When it comes to "make depend" it fails looking for the aic0.h file . It could not find the files or directories associated with this card? I did install everything (programs) and for the sources I included: a. headers b. kernel source c. base Did I miss anything? I require the DAT drive to work, I got tired of replacing everything so hence I found and bought it. It does work under Linux and NT so I know it is operational. Please tell me I goofed on the software source install or something . I don't relish wasting over $100.00 CDN on software which I cannot use? Thanks Mike Jennings To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 18:11:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id B4EAD14D66 for ; Mon, 4 Oct 1999 18:11:28 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11YJ8Z-0001l0-00; Mon, 4 Oct 1999 18:11:27 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id SAA20105; Mon, 4 Oct 1999 18:11:24 -0700 Date: Mon, 4 Oct 1999 18:11:24 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: VMWare and friends (was: Re: GNOME: Does anyone use it?) To: Jerry Dunham Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <199910042342.SAA64758@freeside.fc.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 4-Oct-99 at 16:42, Jerry Dunham (jdunham@fc.net) wrote: > patl@phoenix.volant.org babbled: > > VMWare sounds interesting; but even that isn't enough to get me to > > run NT. What I'd really like to see would be an Open Source system > > that is conceptually closer to the old IBM VM/370 design. It could > > use drivers and much of the kernel from *BSD, Linux, or whatever. > > But instead of running on top of another OS, it should be the kernel; > > and it should -not- support running programs directly, only virtual > > machines. Add a mechanism to allow VM-aware OSes to communicate > > with the VM and delegate certain operations (e.g. paging) to it, > > and you've got an ideal system for multi-os or multiple virtual host > > operations. But I digress... > > But it's a digression I LIKE. Are you and I the only ones on this list > who salivate at such thoughts? I WANT a system like that! The depressing thing for me is that I worked on a system like that 25 years ago. And that's not the only area where computer science appears to have stood still or gone backwards during that time. (Just try to find a decent macro processor.) At the popularity of Java, Perl, et. al, seem to finally be breaking the industry free of C's stranglehold; so there is some hope that language development can get back on track. -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 18:12:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rdc3.on.home.com (ha2.rdc3.on.home.com [24.2.9.69]) by hub.freebsd.org (Postfix) with ESMTP id C967D14D66 for ; Mon, 4 Oct 1999 18:12:27 -0700 (PDT) (envelope-from marko@vidvox.com) Received: from cr90237a ([24.112.202.234]) by mail.rdc3.on.home.com (InterMail v4.01.01.02 201-229-111-106) with SMTP id <19991005011109.DQSW15230.mail.rdc3.on.home.com@cr90237a> for ; Mon, 4 Oct 1999 18:11:09 -0700 Message-ID: <02ed01bf0ee8$401235c0$eaca7018@cambr1.on.wave.home.com> Reply-To: "Marko Vidberg" From: "Marko Vidberg" To: Subject: Trying to install php... problems Date: Mon, 4 Oct 1999 21:14:53 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am trying to install php2 (yes, the old version) onto a new Freebsd release and am having some compilation problems. I am getting the error: db.c: In function "ListSupportDBs" db.c: 55: 'gdbm_version' undeclared *** Error code 1 Now, my question is... what is gdbm and what should I do to resolve this problem? Thanks for any help. Marko marko@vidvox.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 19:22:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from vitoria.ddsecurity.com.br (vitoria.ddsecurity.com.br [200.18.130.93]) by hub.freebsd.org (Postfix) with SMTP id E22EC15063 for ; Mon, 4 Oct 1999 19:22:07 -0700 (PDT) (envelope-from grios@ddsecurity.com.br) Received: (qmail 33772 invoked from network); 5 Oct 1999 02:22:05 -0000 Received: from unknown (HELO ddsecurity.com.br) (200.236.148.103) by vitoria.ddsecurity.com.br with SMTP; 5 Oct 1999 02:22:05 -0000 Message-ID: <37F96E9D.A7BE7FD2@ddsecurity.com.br> Date: Tue, 05 Oct 1999 00:21:01 -0300 From: Gustavo V G C Rios X-Mailer: Mozilla 4.51 [en] (X11; I; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: (no subject) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Does anybody know if ssh-1.2.7 (in ports collections) has already had its security bugs fixed ? -- "Security is not a state, but a process." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 19:46: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from po3.wam.umd.edu (po3.wam.umd.edu [128.8.10.165]) by hub.freebsd.org (Postfix) with ESMTP id A5411151E4 for ; Mon, 4 Oct 1999 19:45:52 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac9.wam.umd.edu (root@rac9.wam.umd.edu [128.8.10.149]) by po3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id WAA20290; Mon, 4 Oct 1999 22:45:41 -0400 (EDT) Received: from rac9.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac9.wam.umd.edu (8.9.3/8.9.3) with SMTP id WAA23513; Mon, 4 Oct 1999 22:45:46 -0400 (EDT) Received: from localhost (culverk@localhost) by rac9.wam.umd.edu (8.9.3/8.9.3) with ESMTP id WAA23503; Mon, 4 Oct 1999 22:45:45 -0400 (EDT) X-Authentication-Warning: rac9.wam.umd.edu: culverk owned process doing -bs Date: Mon, 4 Oct 1999 22:45:44 -0400 (EDT) From: Kenneth Wayne Culver To: Jeroen Ruigrok/Asmodai Cc: "Erik S. Carlsten" , freebsd-questions@FreeBSD.ORG Subject: Re: Diamond Monster Sound MX300 In-Reply-To: <19991004230031.F96050@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Yes I know this, I'm running -CURRENT right now, and have been for about a year and a half now. The 8820 (Aureal Vortex) driver isn't done yet. Cameron grant told me. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Mon, 4 Oct 1999, Jeroen Ruigrok/Asmodai wrote: > On [19991004 22:44], Kenneth Wayne Culver (culverk@wam.umd.edu) wrote: > >I would be glad to help test the Aureal Vortex 1 chip, the Diamond Monstor > >sound has the Aureal Vortex II chip, or the 8830, while the vortex 1 has > >the 8820. > > CURRENT has support for the 8820. > > So if it still needs testing you will have to move to CURRENT. And I > don't know if you want nor if it would be desirable to do so. > > CURRENT _is_ developer's material and you should know how to get things > done somewhat more individual. > > HTH, > > -- > Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl > The BSD Programmer's Documentation Project > Network/Security Specialist BSD: Technical excellence at its best > What's in a name? That which we call a rose by any other name would > smell as sweet. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 20: 3:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 2EA8514D11 for ; Mon, 4 Oct 1999 20:03:24 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YKst-000PhE-00; Tue, 5 Oct 1999 04:03:23 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id EAA15493 for ; Tue, 5 Oct 1999 04:03:23 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 04:03:22 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: MS compatible editor? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Besides staroffice, are there any FreeBSD editors/WP's that can save in .doc format? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 20: 4:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 5F99414C0C for ; Mon, 4 Oct 1999 20:04:37 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YKu1-000NaN-00; Tue, 5 Oct 1999 04:04:33 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id EAA15497 for ; Tue, 5 Oct 1999 04:04:33 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 04:04:33 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: cleannup for boot screen Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG When my system starts up , the pccard is delayed, so often as i am logging in, the pccard daemon reports the pcmcia card. Is there any way i can prevent this? It's only for aesthetic purposes, but it still bugs me. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 20:41:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 8E653151C8 for ; Mon, 4 Oct 1999 20:41:34 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id XAA11119; Mon, 4 Oct 1999 23:44:33 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910050344.XAA11119@cc942873-a.ewndsr1.nj.home.com> Subject: Re: Multiple Default Routes !!! In-Reply-To: <19991004233259.13775.qmail@hotmail.com> from David Cook at "Oct 5, 1999 09:32:55 am" To: dacster69@hotmail.com (David Cook) Date: Mon, 4 Oct 1999 23:44:32 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG David Cook wrote, > I'm really hoping that some kind soul will have a look at this > problem for me ... I've posted this twice now with absolutely > ** zero ** response. I'd demand my money back. > Anyway ... third time lucky ... Maybe. Dunno if you'll like my answer. [snip] > bash-2.02# route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 1 > add net 192.168: gateway 192.168.26.15 ^ What's this? Try losing that '1' on the end there. > bash-2.02# netstat -rn > Routing tables > > Internet: > Destination Gateway Flags Refs Use Netif > Expire > default 192.168.26.15 UGSc 1 0 ed1 => > default 192.168.26.15 UGSc 3 1 ed1 > 127.0.0.1 127.0.0.1 UH 0 2 lo0 > 192.168.26 link#1 UC 0 0 ed1 > 192.168.26.15 0:90:27:72:a4:ba UHLW 4 0 ed1 1058 > 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 Not sure why it does this though. > I get *two* default routes!!! I cannot seem to delete the original > without a "route flush", which kills my telnet session from home, and > leaves no default route at all. I'd tell you to do, # route flush; route add default All in one command line to prevent the loss of the connection, but in this case it would not work. The 'route flush' hangs when I try it (but when interuptted, the default routes are both gone). -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 20:42:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id BB49014E0C for ; Mon, 4 Oct 1999 20:42:11 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id WAA77926; Mon, 4 Oct 1999 22:42:10 -0500 (CDT) (envelope-from dan) Date: Mon, 4 Oct 1999 22:42:10 -0500 From: Dan Nelson To: David Cook Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Multiple Default Routes !!! Message-ID: <19991004224209.A77700@dan.emsphone.com> References: <19991004233259.13775.qmail@hotmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991004233259.13775.qmail@hotmail.com> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 05), David Cook said: > 192.168.26.15 0:90:27:72:a4:ba UHLW 3 0 ed1 1177 > 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 > > bash-2.02# route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 1 > add net 192.168: gateway 192.168.26.15 Try removing the trailing "1" from your command; the syntax according to the manpage is: route [-n] command [-net | -host] destination gateway I tried your command with the "1" and it ended up being an undeletable default route like you said. Without the "1", it was added correctly: 192.168/16 192.168.26.15 UGSc 0 0 ep0 I guess you've found a bug in the route documentation. I checked the code, and there is a third optional argument to "route add" which sets the netmask, overriding the -netmask switch. The netmask of 1 must have confused route enough to insert a bad entry into the routing table. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:17: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (law2-f108.hotmail.com [216.32.181.108]) by hub.freebsd.org (Postfix) with SMTP id 0D60414BEA for ; Mon, 4 Oct 1999 21:17:05 -0700 (PDT) (envelope-from parishw@hotmail.com) Received: (qmail 78789 invoked by uid 0); 5 Oct 1999 04:17:05 -0000 Message-ID: <19991005041705.78788.qmail@hotmail.com> Received: from 203.96.111.195 by www.hotmail.com with HTTP; Mon, 04 Oct 1999 21:17:04 PDT X-Originating-IP: [203.96.111.195] From: "Wesley Parish" To: questions@freebsd.org Subject: BSD OSI protocol stack Date: Tue, 05 Oct 1999 17:17:04 NZDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi. I'm afraid this mightn't be considered a bona fide FreeBSD (only) question ( more of a generic *BSD question ), but I'm interested in porting some TCP\IP stuff to OSI, eg, fsp, fping, etc, for a private project I'm fooling around with. I don't have any OSI documentation, and the fourth ed of Stalling's Data and Computer Communications is decidedly sparse. I like Marshall Rose's stuff - I've got his Simple Book - but his OSI book, the Open Book is probably out of print. For TCP\IP, I'm using Stevens' TCP\IP Illustrated, and it fits the bill. I just need OSI information. Do you know who could help? Wesley Parish ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:18:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from justice.zips.net (justice.zips.net [207.234.219.219]) by hub.freebsd.org (Postfix) with ESMTP id B838714BEA for ; Mon, 4 Oct 1999 21:18:17 -0700 (PDT) (envelope-from zips@zips.net) Received: from localhost (zips@localhost) by justice.zips.net (8.9.3/8.9.3) with ESMTP id AAA07000; Tue, 5 Oct 1999 00:22:58 -0400 (EDT) (envelope-from zips@zips.net) Date: Tue, 5 Oct 1999 00:22:58 -0400 (EDT) From: Hector Colmenares To: cjclark@home.com Cc: David Cook , freebsd-questions@FreeBSD.ORG Subject: Re: Multiple Default Routes !!! In-Reply-To: <199910050344.XAA11119@cc942873-a.ewndsr1.nj.home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG You might want to try it like This. bash-2.02# route add -net 192.168 -netmask 255.255.0.0 bash-2.02# route -n add default 192.168.26.15 On Mon, 4 Oct 1999, Crist J. Clark wrote: > David Cook wrote, > > I'm really hoping that some kind soul will have a look at this > > problem for me ... I've posted this twice now with absolutely > > ** zero ** response. > > I'd demand my money back. > > > Anyway ... third time lucky ... > > Maybe. Dunno if you'll like my answer. > > [snip] > > > bash-2.02# route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 1 > > add net 192.168: gateway 192.168.26.15 > ^ > What's this? > Try losing that '1' on the end there. > > > bash-2.02# netstat -rn > > Routing tables > > > > Internet: > > Destination Gateway Flags Refs Use Netif > > Expire > > default 192.168.26.15 UGSc 1 0 ed1 => > > default 192.168.26.15 UGSc 3 1 ed1 > > 127.0.0.1 127.0.0.1 UH 0 2 lo0 > > 192.168.26 link#1 UC 0 0 ed1 > > 192.168.26.15 0:90:27:72:a4:ba UHLW 4 0 ed1 1058 > > 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 > > Not sure why it does this though. > > > I get *two* default routes!!! I cannot seem to delete the original > > without a "route flush", which kills my telnet session from home, and > > leaves no default route at all. > > I'd tell you to do, > > # route flush; route add default > > All in one command line to prevent the loss of the connection, but in > this case it would not work. The 'route flush' hangs when I try it > (but when interuptted, the default routes are both gone). > -- > Crist J. Clark cjclark@home.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:22:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id A3A74150A9 for ; Mon, 4 Oct 1999 21:22:26 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id AAA11214 for freebsd-questions@FreeBSD.ORG; Tue, 5 Oct 1999 00:25:26 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910050425.AAA11214@cc942873-a.ewndsr1.nj.home.com> Subject: Vinum Used as Swap To: bdsq@cc942873-a.ewndsr1.nj.home.com, grog@lemis.com Date: Tue, 5 Oct 1999 00:23:23 -0400 (EDT) Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a general question about vinum... I was not sure to direct it to freebsd-questions or straight to grog@lemis.com, so I sent it to both. I have set up some old SCSI disks as a striped volume. The disks were not exactly the same size but one was _almost_ exactly twice the size of the other, # disklabel da1 [snip] 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 2054864 0 unused 0 0 # (Cyl. 0 - 1003*) h: 2054864 0 vinum # (Cyl. 0 - 1003*) # disklabel da2 [snip] 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 4165272 0 unused 0 0 # (Cyl. 0 - 2033*) g: 2082636 0 vinum # (Cyl. 0 - 1016*) h: 2082636 2082636 vinum # (Cyl. 1016*- 2033*) In order to go striped, I had to make all of the subdisks the same size, which leaves a couple of 10's of MB's unusable on the stripped plex. Now, I'm not losing sleep over these extra few MB being idle, but I have two ideas on how to use them since they are there. Define the two left over pieces of da2g and da2h as an additional plex and, 1) Add it as a second concat/striped plex to my big striped volume, or 2) Use it as an extra piece of swap (right now all swap is living on IDE drives). If I chose this options is it better to, i) Define a vinum volume with the plex and use it as swap? (Does vinum do swap well[0]? ii) Should I have thought of this before and cut a da2b partition to use the space. I've read the docs at the website and the manpages and have it up and working, but I have not developed a real feel for vinum yet. Thanks to Greg for the contribution to FreeBSD and thanks to anyone with answers or opinions on how I should or should have set this up. Oh, and I believe it is customary to include your vinum config file in a vinum mail (even if the config does seem to be working ;), drive scsi1 device /dev/da1h drive scsi2 device /dev/da2g drive scsi3 device /dev/da2h volume scsivol plex org striped 512k sd length 1003m drive scsi1 sd length 1003m drive scsi2 sd length 1003m drive scsi3 [0] I only found one off-hand mention about using vinum for swap anywhere in the docs, vinum(8), "setupstate When creating a multi-plex volume,... ...when using a volume for a file system or a swap partition,..." I personally believe some mention of the efficacy of vinum as swap, or lack of it, should be included. That's not to say I might not have somehow missed it, in which case a pointer would be appreciated. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:28:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.knu.ac.kr (unix.kyungpook.ac.kr [155.230.124.116]) by hub.freebsd.org (Postfix) with ESMTP id 5970E14D57 for ; Mon, 4 Oct 1999 21:28:16 -0700 (PDT) (envelope-from hdcho@unix.knu.ac.kr) Received: (from hdcho@localhost) by unix.knu.ac.kr (8.9.3/8.9.3) id NAA31995 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 13:26:56 +0900 (KST) (envelope-from hdcho) Date: Tue, 5 Oct 1999 13:26:56 +0900 (KST) From: Huidae Cho Message-Id: <199910050426.NAA31995@unix.knu.ac.kr> To: freebsd-questions@freebsd.org Subject: CRASH, CRASH AND CRASH Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Crashes of my systems: 1) Pentium 133MHz with 64MB, LAN: 0 time since 1999/08/17 2) Pentium MMX 200MHz with 32MB, LAN: > 10 times since 1999/08/20 3) Pentium MMX 200MHz with 64MB, PPP: 5 times since 1999/08/17 What I was doing when crash: 1) Everything what I want w/o crash 2) Netscape on X-Window: many times Busy swapping on X-Window w/o netscape: 3 times Idle time on console: 1 time 3) Netscape on X-Window with PPP: 3 times Netscape on X-Window w/o PPP: 1 time Trying PPP on console: 1 time When X-Window crashed, I couldn't switch to any consoles. Perfect CRASH and hard reboot. --- Meanwhile, Linux always gave me a clue of crash(some panic messages). And everytime X-Window crashed, I came back to console. --- Some people says that this is an APM problem. However I disabled APM features of BIOS. Others say netscape problem. No body says PPP problem. I'm writing lame english :). --- I want to use FreeBSD, however FreeBSD crashes more than Linux does. Please help me. Regards, Huidae Cho To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:41:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from majordomo2.umd.edu (majordomo2.umd.edu [128.8.10.7]) by hub.freebsd.org (Postfix) with ESMTP id E67AA150A9 for ; Mon, 4 Oct 1999 21:41:37 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac2.wam.umd.edu (root@rac2.wam.umd.edu [128.8.10.142]) by majordomo2.umd.edu (8.9.3/8.9.3) with ESMTP id AAA17247; Tue, 5 Oct 1999 00:41:24 -0400 (EDT) Received: from rac2.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac2.wam.umd.edu (8.9.3/8.9.3) with SMTP id AAA04332; Tue, 5 Oct 1999 00:41:27 -0400 (EDT) Received: from localhost (culverk@localhost) by rac2.wam.umd.edu (8.9.3/8.9.3) with ESMTP id AAA04328; Tue, 5 Oct 1999 00:41:27 -0400 (EDT) X-Authentication-Warning: rac2.wam.umd.edu: culverk owned process doing -bs Date: Tue, 5 Oct 1999 00:41:27 -0400 (EDT) From: Kenneth Wayne Culver To: Huidae Cho Cc: freebsd-questions@FreeBSD.ORG Subject: Re: CRASH, CRASH AND CRASH In-Reply-To: <199910050426.NAA31995@unix.knu.ac.kr> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG you failed to mention what version of FreeBSD you are using. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Tue, 5 Oct 1999, Huidae Cho wrote: > Crashes of my systems: > > 1) Pentium 133MHz with 64MB, LAN: 0 time since 1999/08/17 > 2) Pentium MMX 200MHz with 32MB, LAN: > 10 times since 1999/08/20 > 3) Pentium MMX 200MHz with 64MB, PPP: 5 times since 1999/08/17 > > > What I was doing when crash: > > 1) Everything what I want w/o crash > 2) Netscape on X-Window: many times > Busy swapping on X-Window w/o netscape: 3 times > Idle time on console: 1 time > 3) Netscape on X-Window with PPP: 3 times > Netscape on X-Window w/o PPP: 1 time > Trying PPP on console: 1 time > > > When X-Window crashed, I couldn't switch to any consoles. Perfect CRASH and > hard reboot. > > --- > > Meanwhile, Linux always gave me a clue of crash(some panic messages). > And everytime X-Window crashed, I came back to console. > > --- > > Some people says that this is an APM problem. However I disabled APM features of > BIOS. > Others say netscape problem. > No body says PPP problem. > > I'm writing lame english :). > > --- > > I want to use FreeBSD, however FreeBSD crashes more than Linux does. > Please help me. > > Regards, > Huidae Cho > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:44:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ima.freek.org (adsl-63-193-239-83.dsl.snfc21.pacbell.net [63.193.239.83]) by hub.freebsd.org (Postfix) with ESMTP id E5FDD151B7 for ; Mon, 4 Oct 1999 21:43:39 -0700 (PDT) (envelope-from kevin@ima.freek.org) Received: from localhost (kevin@localhost) by ima.freek.org (8.9.3/8.9.2) with ESMTP id IAA02283 for ; Mon, 4 Oct 1999 08:32:58 -0700 (PDT) (envelope-from kevin@ima.freek.org) Date: Mon, 4 Oct 1999 08:32:57 -0700 (PDT) From: Kevin To: freebsd-questions@freebsd.org Subject: Contour Mouse support? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Has anyone ever got a "Contour Mouse" to work? (doesn't have a brand name, unless that is it). It is a ps/2 style mouse, and I tried to enable that on a 2.2.8 box...but it didn't want to work. TIA kevin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:50:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.knu.ac.kr (unix.kyungpook.ac.kr [155.230.124.116]) by hub.freebsd.org (Postfix) with ESMTP id 85DE414F3D for ; Mon, 4 Oct 1999 21:48:28 -0700 (PDT) (envelope-from hdcho@unix.knu.ac.kr) Received: (from hdcho@localhost) by unix.knu.ac.kr (8.9.3/8.9.3) id NAA32137; Tue, 5 Oct 1999 13:46:57 +0900 (KST) (envelope-from hdcho) Date: Tue, 5 Oct 1999 13:46:57 +0900 (KST) From: Huidae Cho Message-Id: <199910050446.NAA32137@unix.knu.ac.kr> To: culverk@wam.umd.edu, hdcho@unix.knu.ac.kr Subject: Re: CRASH, CRASH AND CRASH Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Until 3.3R released, I used 3.2-19990815-STABLE. And now I use 3.3R With 3.3R i experienced about 3 times crash. > From culverk@wam.umd.edu Tue Oct 5 13:40:17 1999 > Date: Tue, 5 Oct 1999 00:41:27 -0400 (EDT) > From: Kenneth Wayne Culver > To: Huidae Cho > cc: freebsd-questions@FreeBSD.ORG > Subject: Re: CRASH, CRASH AND CRASH > > you failed to mention what version of FreeBSD you are using. > > > ================================================================= > | Kenneth Culver | FreeBSD: The best OS around. | > | Unix Systems Administrator | ICQ #: 24767726 | > | and student at The | AIM: AgRSkaterq | > | The University of Maryland, | Website: (Under Construction) | > | College Park. | http://www.wam.umd.edu/~culverk/| > ================================================================= > > On Tue, 5 Oct 1999, Huidae Cho wrote: > > > Crashes of my systems: > > > > 1) Pentium 133MHz with 64MB, LAN: 0 time since 1999/08/17 > > 2) Pentium MMX 200MHz with 32MB, LAN: > 10 times since 1999/08/20 > > 3) Pentium MMX 200MHz with 64MB, PPP: 5 times since 1999/08/17 > > > > > > What I was doing when crash: > > > > 1) Everything what I want w/o crash > > 2) Netscape on X-Window: many times > > Busy swapping on X-Window w/o netscape: 3 times > > Idle time on console: 1 time > > 3) Netscape on X-Window with PPP: 3 times > > Netscape on X-Window w/o PPP: 1 time > > Trying PPP on console: 1 time > > > > > > When X-Window crashed, I couldn't switch to any consoles. Perfect CRASH and > > hard reboot. > > > > --- > > > > Meanwhile, Linux always gave me a clue of crash(some panic messages). > > And everytime X-Window crashed, I came back to console. > > > > --- > > > > Some people says that this is an APM problem. However I disabled APM features of > > BIOS. > > Others say netscape problem. > > No body says PPP problem. > > > > I'm writing lame english :). > > > > --- > > > > I want to use FreeBSD, however FreeBSD crashes more than Linux does. > > Please help me. > > > > Regards, > > Huidae Cho > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:51:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id BD0FD15205 for ; Mon, 4 Oct 1999 21:49:33 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YMXc-0000XP-00; Tue, 5 Oct 1999 05:49:32 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id FAA16183 for ; Tue, 5 Oct 1999 05:49:32 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 05:49:31 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: ISP connections problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm having a problem with both of my ISP's. One is PAP, one is not, one is local, one is not. But both seem to cut out after about ten minutes. ANy idea why? I don't rememeber this happening with windows. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 21:54:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.portal2.com (ns1.portal2.com [203.85.226.193]) by hub.freebsd.org (Postfix) with SMTP id 3C3351532C for ; Mon, 4 Oct 1999 21:53:54 -0700 (PDT) (envelope-from yusufg@yusufg.portal2.com) Received: (qmail 36588 invoked from network); 5 Oct 1999 04:52:42 -0000 Received: from yusufg.portal2.com (qmailr@203.85.226.249) by ns1.portal2.com with SMTP; 5 Oct 1999 04:52:42 -0000 Received: (qmail 11295 invoked by uid 500); 5 Oct 1999 04:53:50 -0000 Date: 5 Oct 1999 04:53:50 -0000 Message-ID: <19991005045350.11294.qmail@yusufg.portal2.com> From: Yusuf Goolamabbas To: freebsd-questions@freebsd.org, freebsd-net@freebsd.org Subject: Trying to achieve zen with natd Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have a FreeBSD 3.3-stable box with 2 NIC cards each bound to static IP's and different ISP WAN interfaces (fxp0 and fxp1) fxp0 is connected to a /25 network fxp1 is connected to a /26 network Default router is fxp1 I would like to configure this box to act as a NATD box. Set the right kernel config and recompile the kernel /etc/rc.conf gateway_enable="YES" firewall_enable="YES" firewall_type="open" natd_enable = "YES" natd_interface = "fxp1" #Assuming this will take the public interface natd_flags = "-u" I did the following in /etc/rc.local ifconfig fxp1 alias 192.168.0.1 netmask 255.255.255.0 Setup a Windows box with IP 192.168.0.2 and gateway 192.168.0.1 I can ping the gateway box, however I can't seem to get out to either the /25 network or the /26 network What am I missing ?? Thanks, Yusuf -- Yusuf Goolamabbas yusufg@outblaze.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 22: 1:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gull.prod.itd.earthlink.net (gull.prod.itd.earthlink.net [207.217.121.85]) by hub.freebsd.org (Postfix) with ESMTP id ADBCA151EC for ; Mon, 4 Oct 1999 22:01:50 -0700 (PDT) (envelope-from imsleepy@earthlink.net) Received: from dialup-209.244.74.106.LosAngeles1.Level3.net (dialup-209.244.74.106.LosAngeles1.Level3.net [209.244.74.106]) by gull.prod.itd.earthlink.net (8.9.3/8.9.3) with ESMTP id WAA11606 for ; Mon, 4 Oct 1999 22:01:49 -0700 (PDT) Date: Mon, 4 Oct 1999 22:01:47 -0700 (PDT) From: imsleepy X-Sender: imsleepy@muffin.fshcrkr.com To: freebsd-questions@freebsd.org Subject: pine error - pine starts readonly Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG [Mailbox is open by another process, access is readonly] i get the above whenever i start pine as any use other than root, but i know i dont have any other processes of pine running. even after i reboot, login, and type 'pine' it starts up with [Mailbox is open by another process, access is readonly] any ideas? -scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 22: 9:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mark.iacan.org (mark.iacan.org [208.1.106.133]) by hub.freebsd.org (Postfix) with ESMTP id C46F0151EC for ; Mon, 4 Oct 1999 22:09:25 -0700 (PDT) (envelope-from kgun@mark.iacan.org) Received: (from kgun@localhost) by mark.iacan.org (8.9.3/8.9.3) id XAA09554; Mon, 4 Oct 1999 23:09:16 -0600 (MDT) (envelope-from kgun) Date: Mon, 4 Oct 1999 23:09:16 -0600 From: "K. Gunderson" To: Scott Mitchell Cc: freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? Message-ID: <19991004230916.A9527@mark.iacan.org> References: <19991004164348.B360@lungfish.freeserve.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: <19991004164348.B360@lungfish.freeserve.co.uk>; from Scott Mitchell on Mon, Oct 04, 1999 at 04:43:48PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, Oct 04, 1999 at 04:43:48PM +0100, Scott Mitchell wrote: > Having given in to my SO's nagging and decided to buy a new printer, my > next task is to make sure it works with our favourite OS before handing > over the cash... The printer in question will probably be from HP simply > because I've never owned/used one that gave me any trouble, whereas the > same cannot be said for certain others :-( Anyway, looking through the > specs for the current crop of Deskjets, many of them apparently use > something called 'Printing Performance Architecture' -- these also seem to > be the models that don't even offer Mac support, so I assume the 'Printing > Performance Architecture' is some kind of poxy WinPrinter thing that is > best avoided. The rest of the range talks PCL Level 3 which I believe is > fine for tools such as GhostScript et. al. > > Any confirmation that these are valid assumptions would be appreciated. > Please cc: to me as I'm not subscribed to -questions these days. I have a Deskjet 660c that I bought several years back for a Windoze box and based upon my experience with both it and HP, I will never buy another HP product as long as I live. First off, the drivers for this puppy have always been sketchy and HP was slow to offer a working WIn95 solution resulting in frequent PITA's. There were also a couple warranty issues that HP refused to honor. The printer came with a 3 year warranty. I called HP to get it sent in for service and they refered me to some outfit in San Diego, despite the fact that I can walk to their Boise offices from here in 5 minutes. The San Diego outfit gave me the run around, and after a bunch more effort with HP phone menus, I was told to take it to the local CompUSA. So I drive it down there and they inform me that the unit only has a 1 year warranty, despite me showing them the side of the box where it clearly denoted 3. The CompUSA manager calls HP to verify, and is informed that the unit only has a 1 year warranty. Go figure. By this time I had no desire to spend a few more hours trying to get a live human at HP and gave up. So hey, screw me once shame on you, but screw me twice shame on me. My advice to anyone who asks is to stay away from HP since once they get your money in hand it's the last service you'll ever get out of them. -- Ciao--Ken http://www.y2know.org/safari Failure is not an option, it comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 22:16:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gull.prod.itd.earthlink.net (gull.prod.itd.earthlink.net [207.217.121.85]) by hub.freebsd.org (Postfix) with ESMTP id BCBFF15205 for ; Mon, 4 Oct 1999 22:16:11 -0700 (PDT) (envelope-from imsleepy@earthlink.net) Received: from dialup-209.244.74.106.LosAngeles1.Level3.net (dialup-209.244.74.106.LosAngeles1.Level3.net [209.244.74.106]) by gull.prod.itd.earthlink.net (8.9.3/8.9.3) with ESMTP id WAA01505 for ; Mon, 4 Oct 1999 22:16:09 -0700 (PDT) Date: Mon, 4 Oct 1999 22:16:08 -0700 (PDT) From: imsleepy X-Sender: imsleepy@muffin.fshcrkr.com To: freebsd-questions@freebsd.org Subject: Re: pine error - pine starts readonly In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, imsleepy wrote: > [Mailbox is open by another process, access is readonly] > > i get the above whenever i start pine as any use other than root, but i > know i dont have any other processes of pine running. even after i > reboot, login, and type 'pine' it starts up with > [Mailbox is open by another process, access is readonly] > > any ideas? > > -scott > heh, i figured out what it was. / was fulling up a lot for me because /tmp kept getting big, so i changed /tmp to a symlink to /var/tmp, and i guess it got root permissions, so pine couldn't use it or something. for the time being i did 'chmod a+rw /tmp' and 'chmod a+rw /var/tmp'. is that correct? im not really fond of having some gapeing hole in on my computer because of me not setting the attributes correctly. also, what permissions should /var have? thanks and sorry -scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 22:22:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from borg-cube.com (226-193.adsl2.avtel.net [207.71.226.193]) by hub.freebsd.org (Postfix) with ESMTP id 9CC401512D; Mon, 4 Oct 1999 22:22:44 -0700 (PDT) (envelope-from dburr@pobox.com) Received: from 60-Hz.Powered-By.AC (dburr@60-Hz.Powered-By.AC [207.71.226.193]) by 60-Hz.Powered-By.AC (8.9.3/8.9.3) with ESMTP id WAA92762; Mon, 4 Oct 1999 22:21:21 -0700 (PDT) (envelope-from dburr@pobox.com) Date: Mon, 4 Oct 1999 22:21:21 -0700 (PDT) From: Donald Burr To: FreeBSD Hardware , FreeBSD Mobile , FreeBSD Questions Subject: Is VIA VT83C469 PCMCIA controller supported? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Please, apologies if you have seen this before. I have been having problems with my domain and e-mail. Those of you who may have tried to send me e-mail may have encountered errors, for now please use my mail forwarder for replies, this should work. Thanks. -- Donald Burr Please use to reply, I am having problems with my domain. ---------- Forwarded message ---------- Date: Sun, 3 Oct 1999 15:30:55 -0700 (PDT) From: Donald Burr To: FreeBSD Hardware , FreeBSD Mobile Subject: Is VIA VT83C469 PCMCIA controller supported? I just picked up a PCMCIA-to-ISA connectivity kit (a card that lets me plug PCMCIA cards into my desktop computer). It uses the VIA VT83C469 PCMCIA controller. Is this chipset supported by the PCMCIA drivers in 3.3-STABLE and/or PAO? (I'd rather not have to move to PAO, though) Thanks! (ps: please CC: your replies to me in e-mail, if possible) -- Donald Burr *NEW!* FreeBSD Dev. | FreeBSD: The WWW: http://www.Powered-By.AC/ *NEW!* ICQ #16997506 | Power to Address: P.O. Box 91212, Santa Barbara, CA 93190-1212 | Serve! http:// Phone: (805) 957-9666 FAX: (800) 492-5954 | www.freebsd.org/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 22:37:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from plan9.greycat.com (plan9.greycat.com [207.173.133.6]) by hub.freebsd.org (Postfix) with ESMTP id A09BF151E6 for ; Mon, 4 Oct 1999 22:36:46 -0700 (PDT) (envelope-from dann@greycat.com) Received: from greycat.com (bigphred.greycat.com [207.173.133.2]) by plan9.greycat.com (8.8.8/8.8.8) with ESMTP id WAA00774 for ; Mon, 4 Oct 1999 22:37:04 -0700 (PDT) Message-ID: <37F98E77.D1B8376@greycat.com> Date: Mon, 04 Oct 1999 22:36:55 -0700 From: Dann Lunsford Organization: You're kidding, right? X-Mailer: Mozilla 4.5 [en] (X11; U; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: FreeBSD on Toshiba laptop Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Last week, I bought a Toshiba 2595XDVD laptop and, since my house and cubicle are Microsoft-free zones, installed FreeBSD 3.3 on it. This has been my second experience with a FreeBSD laptop. Except for some nits, it's gone well. I need help with those nits. First, this thing has built in sound devices, based on the ESS ES1978 chipset, claims SB Pro compatibility, etc. The only noise I can get out of it is the BEEP when I try to backspace too far. Both the Voxware SB drivers and Luigi Rizzo's pcm driver simply say "pcm0 not found" or "sb0 not found". I've scoured the man pages, etc., ad nauseum. I am obviously missing something. What, I don't know. Anyone gotten sound to work on a similar (or identical) laptop? Second, the builtin modem; I've got it set at default locations in the BIOS (com2, 0x2f8, irq 3) but all I get at boot is "sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: not found" The device sio1 line in my config is the standard one. I'm not sure what the message about probed irqs really means, but I suspect the builtin device is a WinModem. Can't get anything from Toshiba yet. In any case, what does that message mean? The good news is that most things work with this machine. Got X up and running at 1024x768x64k, looks great. Machine is nice and fast, has some really neat features. But I would *really* appreciate some help with these two areas. Thanks in advance. Dann Lunsford To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 23: 7:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta4.rcsntx.swbell.net (mta4.rcsntx.swbell.net [151.164.30.28]) by hub.freebsd.org (Postfix) with ESMTP id 0EEE3154B4 for ; Mon, 4 Oct 1999 23:07:14 -0700 (PDT) (envelope-from chris@tourneyland.com) Received: from momma ([216.62.177.1]) by mta4.rcsntx.swbell.net (Sun Internet Mail Server sims.3.5.1999.09.16.21.57.p8) with SMTP id <0FJ4000LY900D0@mta4.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 01:07:13 -0500 (CDT) Date: Tue, 05 Oct 1999 01:06:21 -0500 From: chris@tourneyland.com Subject: Re: 3.3-Release - problem with PATH? In-reply-to: <01bf0efe$79f14400$0000e9c1@serv2.binep.ac.ru> X-Sender: pop992333@mail.9netave.net To: freebsd-questions@freebsd.org Message-id: <3.0.6.32.19991005010621.008fb560@mail.9netave.net> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Content-type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks to everyone who told me about the wonderful rehash command. I firmly believe it will completely change my life. I wonder why more make programs don't have it as part of their rigamarole? Maybe it takes a while. Oh well. Thanks again all! Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 23: 9:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bsd4us.org (cn386092-a.newcas1.de.home.com [24.40.46.90]) by hub.freebsd.org (Postfix) with ESMTP id 480C415277 for ; Mon, 4 Oct 1999 23:08:50 -0700 (PDT) (envelope-from lgriffin@naviant.com) Received: from plato (IDENT:root@cn386092-a.newcas1.de.home.com [24.40.46.90]) by bsd4us.org (8.9.3/8.9.3) with SMTP id CAA01148 for ; Tue, 5 Oct 1999 02:08:49 -0400 (EDT) From: "Lyndon Griffin" To: Subject: newsyslog Date: Mon, 4 Oct 1999 23:12:06 -0700 Message-ID: <001901bf0ef8$8cf30bc0$7894a8c0@naviant.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG What is the recommended way to control when newsyslog rotates files? = What I mean by this is I would like to rotate a particular log weekly, = which is no problem - I figured that much out, but I want the rotation = to occur at 7pm, for example. If it matters, the machine is configured for the timezone I am in... = this is a 3.3-RELEASE box. Thanks, <:)=A0 Lyndon Griffin Systems Engineer |||=A0 Naviant=A0 ||| ******************************************** 100 buckets of bits on the bus=A0 100 buckets of bits Take one down, short it to ground FF buckets of bits on the bus=A0=A0 FF buckets of bits on the bus=A0=A0 FF buckets of bits Take one down, short it to ground FE buckets of bits on the bus...=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 23:25:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from moon.mteege.de (ppps-nb03.MVnet.de [194.25.108.153]) by hub.freebsd.org (Postfix) with ESMTP id 36697152B7 for ; Mon, 4 Oct 1999 23:24:56 -0700 (PDT) (envelope-from matthias@mteege.de) Received: (from matthias@localhost) by moon.mteege.de (8.8.8/8.8.8) id IAA27085; Tue, 5 Oct 1999 08:14:36 +0200 (MET DST) (envelope-from matthias) Date: Tue, 5 Oct 1999 08:14:36 +0200 From: Matthias Teege To: Ion Mihai Tetcu Cc: freebsd-questions@FreeBSD.ORG Subject: Re: [Q] FreeBSD&Mac Message-ID: <19991005081436.A27006@moon.mteege.de> References: <19991004214656.EFC3615043@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991004214656.EFC3615043@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 12:45:33AM +0200, Ion Mihai Tetcu wrote: > Hi, > > Is there any way to cp files from/to a Mac floppy ? > If not how can it be done under DOS ? cd /usr/ports/emulators/macutils make install Matthias -- Matthias Teege -- matthias@mteege.de -- http://emugs.de make world not war PGP-Key auf Anfrage To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 23:27: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta4.rcsntx.swbell.net (mta4.rcsntx.swbell.net [151.164.30.28]) by hub.freebsd.org (Postfix) with ESMTP id 5ED5F151CC for ; Mon, 4 Oct 1999 23:25:40 -0700 (PDT) (envelope-from chris@tourneyland.com) Received: from momma ([216.62.177.1]) by mta4.rcsntx.swbell.net (Sun Internet Mail Server sims.3.5.1999.09.16.21.57.p8) with SMTP id <0FJ4006J79URHO@mta4.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 01:25:39 -0500 (CDT) Date: Tue, 05 Oct 1999 01:24:47 -0500 From: chris@tourneyland.com Subject: MySQL layout question X-Sender: pop992333@mail.9netave.net To: freebsd-questions@freebsd.org Message-id: <3.0.6.32.19991005012447.008fd400@mail.9netave.net> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Content-type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm on the MySQL site reading about their layout. To my surprise, the layouts form a binary install and a source install are quite different. At first I thought this was silly and a clearly terrible idea, but then I figured I ought to leave room for the fact that I'm new to FreeBSD, Unix, and installing-from-source, and maybe there's lots I don't know. Can anyone tell me why MySQL would have done this? I figure their reason is probably interesting and enlightening (at least to a newguy like me). Thanks, Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 23:31:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dart.sr.se (dart.SR.SE [193.12.91.98]) by hub.freebsd.org (Postfix) with ESMTP id D24CF1534F for ; Mon, 4 Oct 1999 23:30:06 -0700 (PDT) (envelope-from gunnar@pluto.sr.se) Received: from honken.sr.se ([134.25.128.27]) by dart.sr.se (8.9.3/8.9.3) with ESMTP id IAA07890; Tue, 5 Oct 1999 08:30:02 +0200 (MET DST) Received: from pluto.sr.se (pluto.SR.SE [134.25.193.91]) by honken.sr.se (8.7.5/8.7.3) with ESMTP id IAA22245; Tue, 5 Oct 1999 08:30:01 +0200 (MET DST) Received: (from gunnar@localhost) by pluto.sr.se (8.9.3/8.9.3) id IAA57865; Tue, 5 Oct 1999 08:30:01 +0200 (CEST) (envelope-from gunnar) Date: Tue, 5 Oct 1999 08:30:01 +0200 From: Gunnar Flygt To: Ade Lovett Cc: FreeBSD Questions Subject: Re: GNOME: Does anyone use it? Message-ID: <19991005083001.A57727@sr.se> Reply-To: Gunnar Flygt References: <99100408410801.37693@fdho-w5.fdnet.com> <19991004162614.H65863@lovett.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991004162614.H65863@lovett.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, Oct 04, 1999 at 04:26:14PM -0500, Ade Lovett wrote: > On Mon, Oct 04, 1999 at 01:30:20PM -0700, patl@phoenix.volant.org wrote: > > > > [snip] > > > > I do this one port at a time instead of > > letting make handle the dependancies. (This is a big enough PITA > > that I don't upgrade that often. My last update was 9 July. I'll > > be trying the current versions in a few days when I upgrade the OS > > to 3.3.) > > I'd suggest that you hold off doing an update for a short while. > > The GNOME folks are almost ready to release a 1.0.50 version (initially > scheduled for end of September), and a number of us are working on the > necessary port updates (by my reckoning there are no less than 23 ports > that have to be updated). > > This particular GNOME update is going to be even more messy (if that > were possible :) than the last few, since glib/gtk+ have to be updated > to 1.2.5 for gnome-core (and ports that depend on it) to work. > > Which means an awful lot of package deleting and recompiling/adding. It would be of very much help, if all this "package deleting and recompiling/adding" was commented in some kind of README in the base GNOME ports directorys. I've given up on trying to keep the thing going. > > Regarding stability, I've found FreeBSD GNOME to be about the same > as running under Linux (RedHat 5.2) -- during the bigger updates, I > tend to run two systems side by side (admittedly as virtual hosts > under VMWare/NT). > > Of course, as with everything, if people don't know about the problems, > then it becomes that much more difficult to fix them, either with > GNOME itself, or the FreeBSD ports thereof. > > Things are compounded for non-Linux people by GNOME's horribly > (in some places) Linux-centric nature (take a peek at the size of > some of the patches in /usr/ports to see what I mean). > > We try extremely hard not to introduce any further problems in the > porting process, but GNOME is absolutely huge, and RealJobs[tm] tend > to get in the way. > > -aDe > > -- > Ade Lovett, Austin, TX. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- __o regards, Gunnar ---_ \<,_ email: flygt@sr.se ---- (_)/ (_) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Mon Oct 4 23:40:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from wank.necropolis.org (wank.westin16.flyingcroc.net [207.246.128.93]) by hub.freebsd.org (Postfix) with ESMTP id 758CE15002 for ; Mon, 4 Oct 1999 23:40:44 -0700 (PDT) (envelope-from todd@flyingcroc.net) Received: from localhost (todd@localhost) by wank.necropolis.org (8.9.3/8.9.3) with ESMTP id XAA68266; Mon, 4 Oct 1999 23:47:42 -0700 (PDT) (envelope-from todd@flyingcroc.net) X-Authentication-Warning: wank.necropolis.org: todd owned process doing -bs Date: Mon, 4 Oct 1999 23:47:42 -0700 (PDT) From: Todd Backman X-Sender: todd@wank.necropolis.org To: imsleepy Cc: freebsd-questions@FreeBSD.ORG Subject: Re: pine error - pine starts readonly In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Just for giggles do a 'ps' after you log in to see if by any chance pine is being envoked upon startup... also check for lockfiles. - Todd On Mon, 4 Oct 1999, imsleepy wrote: > [Mailbox is open by another process, access is readonly] > > i get the above whenever i start pine as any use other than root, but i > know i dont have any other processes of pine running. even after i > reboot, login, and type 'pine' it starts up with > [Mailbox is open by another process, access is readonly] > > any ideas? > > -scott > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 0:13: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailmtx.acnet.net (mailmtx.acnet.net [170.76.16.130]) by hub.freebsd.org (Postfix) with ESMTP id 1581C1507B for ; Tue, 5 Oct 1999 00:12:57 -0700 (PDT) (envelope-from juanluis@acnet.net) Received: from yojan.acnet.net ([167.114.50.156]) by mailmtx.acnet.net (Post.Office MTA v3.5.3 release 223 ID# 0-52476U50000L50000S0V35) with SMTP id net for ; Tue, 5 Oct 1999 02:12:50 -0500 Message-Id: <3.0.5.32.19991005010421.007bde00@acnet.net> X-Sender: juanluis@acnet.net X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.5 (32) Date: Tue, 05 Oct 1999 01:04:21 -0500 To: freebsd-questions@FreeBSD.ORG From: Juan Luis montes Ruiz Subject: no se como suscribirme a la lista de correo Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hola he tratado de suscribirme a la lista de correo perono he podido. porfavor digame quee s lo que devo de poner en el correo para que me suscriba siempre me manda este error: >>>> subscribe **** subscribe: unknown list ''. >>>> Atte. **** Command 'atte.' not recognized. >>>> Juan Luis Montes **** Command 'juan' not recognized. >>>> Nodo Tapachula **** Command 'nodo' not recognized. **** Help for Majordomo@es.freebsd.org: This help message is being sent to you from the Majordomo mailing list management system at Majordomo@es.freebsd.org. This is version 1.94.4 of Majordomo. If you're familiar with mail servers, an advanced user's summary of Majordomo's commands appears at the end of this message. Majordomo is an automated system which allows users to subscribe and unsubscribe to mailing lists, and to retrieve files from list archives. You can interact with the Majordomo software by sending it commands in the body of mail messages addressed to "Majordomo@es.freebsd.org". Please do not put your commands on the subject line; Majordomo does not process commands in the subject line. You may put multiple Majordomo commands in the same mail message. Put each command on a line by itself. Atte. Juan Luis Montes Nodo Tapachula To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 0:26:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.knu.ac.kr (unix.kyungpook.ac.kr [155.230.124.116]) by hub.freebsd.org (Postfix) with ESMTP id 6DC8215599 for ; Tue, 5 Oct 1999 00:26:22 -0700 (PDT) (envelope-from hdcho@unix.knu.ac.kr) Received: (from hdcho@localhost) by unix.knu.ac.kr (8.9.3/8.9.3) id QAA32902; Tue, 5 Oct 1999 16:24:56 +0900 (KST) (envelope-from hdcho) Date: Tue, 5 Oct 1999 16:24:56 +0900 (KST) From: Huidae Cho Message-Id: <199910050724.QAA32902@unix.knu.ac.kr> To: dann@greycat.com, questions@FreeBSD.ORG Subject: Re: FreeBSD on Toshiba laptop In-Reply-To: <37F98E77.D1B8376@greycat.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG SB Pro compat. mode with ESS works well for me. edit /sys/i386/isa/sound/local.h search '#define CONFIG_SBPRO' and copy it outside of #if NSBXVI ... #endif. I experienced 'NOTE! SB Pro support required with your soundcard!' message w/o edit this. and not pcm driver. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 0:45:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f74.law3.hotmail.com [209.185.241.74]) by hub.freebsd.org (Postfix) with SMTP id AF22C1512D for ; Tue, 5 Oct 1999 00:45:41 -0700 (PDT) (envelope-from dacster69@hotmail.com) Received: (qmail 34011 invoked by uid 0); 5 Oct 1999 07:45:41 -0000 Message-ID: <19991005074541.34010.qmail@hotmail.com> Received: from 203.29.147.98 by www.hotmail.com with HTTP; Tue, 05 Oct 1999 00:45:40 PDT X-Originating-IP: [203.29.147.98] From: "David Cook" To: cjclark@home.com Cc: freebsd-questions@freebsd.org Subject: Re: Multiple Default Routes !!! Date: Tue, 05 Oct 1999 17:45:40 EST Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > >I'd demand my money back. > I have ... but it met with the same reaction! > What's this? Supposedly a metric number for the route command >Try losing that '1' on the end there. Which freebsd's route obviously doesn't need! Yet another case of RFTM, I guess. Mind you, there is altogether too much FM to R. Thanks Christ, that was the problem. Much oblidged. David ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 0:47:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f195.law3.hotmail.com [209.185.241.195]) by hub.freebsd.org (Postfix) with SMTP id 84DBF14BF1 for ; Tue, 5 Oct 1999 00:47:38 -0700 (PDT) (envelope-from dacster69@hotmail.com) Received: (qmail 34311 invoked by uid 0); 5 Oct 1999 07:47:37 -0000 Message-ID: <19991005074737.34310.qmail@hotmail.com> Received: from 203.29.147.98 by www.hotmail.com with HTTP; Tue, 05 Oct 1999 00:47:36 PDT X-Originating-IP: [203.29.147.98] From: "David Cook" To: dnelson@emsphone.com Cc: freebsd-questions@freebsd.org Subject: Re: Multiple Default Routes !!! Date: Tue, 05 Oct 1999 17:47:36 EST Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >I tried your command with the "1" and it ended up being an undeletable >default route like you said. Without the "1", it was added correctly: > >192.168/16 192.168.26.15 UGSc 0 0 ep0 > Yep, that was the problem. >I guess you've found a bug in the route documentation. I checked the >code, and there is a third optional argument to "route add" which sets >the netmask, overriding the -netmask switch. The netmask of 1 must >have confused route enough to insert a bad entry into the routing >table. Or a bug in my brain's firmware ... Thanks Dan. David ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 0:51:47 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f25.law3.hotmail.com [209.185.241.25]) by hub.freebsd.org (Postfix) with SMTP id AA49615550 for ; Tue, 5 Oct 1999 00:51:44 -0700 (PDT) (envelope-from dacster69@hotmail.com) Received: (qmail 52748 invoked by uid 0); 5 Oct 1999 07:51:44 -0000 Message-ID: <19991005075144.52747.qmail@hotmail.com> Received: from 203.29.147.98 by www.hotmail.com with HTTP; Tue, 05 Oct 1999 00:51:43 PDT X-Originating-IP: [203.29.147.98] From: "David Cook" To: zips@zips.net Cc: freebsd-questions@freebsd.org Subject: Re: Multiple Default Routes !!! Date: Tue, 05 Oct 1999 17:51:43 EST Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > You might want to try it like This. > > bash-2.02# route add -net 192.168 -netmask 255.255.0.0 > bash-2.02# route -n add default 192.168.26.15 > Not exactly ... the default route is going to be the dynamic IP address assigned by the ISP. The 192.168.0.0's are for internal routing only. Losing the 1 from the end was the answer. T'was a false metric number not required by bsd's route command. (NT & Linux use it tho) Thanks for your help. David ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 1: 9:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pcpsj.pfcs.com (harlan.clark.net [168.143.10.179]) by hub.freebsd.org (Postfix) with ESMTP id 55A05155A3 for ; Tue, 5 Oct 1999 01:08:47 -0700 (PDT) (envelope-from Harlan.Stenn@pfcs.com) Received: from mumps.pfcs.com [192.52.69.11] (HELO mumps.pfcs.com) by pcpsj.pfcs.com (8.9.3/8.9.3) via ESMTP id for ; Tue, 5 Oct 1999 04:08:46 -0400 (EDT) Received: from brown.pfcs.com [192.52.69.44] (HELO brown.pfcs.com) by mumps.pfcs.com (8.8.8/8.8.8) via ESMTP id for ; Tue, 5 Oct 1999 01:01:36 -0700 (PDT) Received: from localhost.pfcs.com [127.0.0.1] (HELO brown.pfcs.com) by brown.pfcs.com (8.8.8/8.8.8) via ESMTP id for ; Tue, 5 Oct 1999 04:06:00 -0400 (EDT) To: questions@freebsd.org Subject: Differential SCSI controller? X-Face: "csXK}xnnsH\h_ce`T#|pM]tG,6Xu.{3Rb\]&XJgVyTS'w{E+|-(}n:c(Cc* $cbtusxDP6T)Hr'k&zrwq0.3&~bAI~YJco[r.mE+K|(q]F=ZNXug:s6tyOk{VTqARy0#axm6BWti9C d User-Agent: EMH/1.10.0 SEMI/1.13.3 (Komaiko) FLIM/1.12.7 (=?ISO-8859-1?Q?Y?= =?ISO-8859-1?Q?=1B=2ED=8E=FEzaki?=) XEmacs/21.1 (20 Minutes to Nikko) (i386-unknown-freebsd2.2.8) MIME-Version: 1.0 (generated by SEMI 1.13.3 - "Komaiko") Content-Type: text/plain; charset=US-ASCII Date: Tue, 05 Oct 1999 04:06:00 -0400 Message-ID: <15064.939110760@brown.pfcs.com> From: Harlan Stenn Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I know somebody who has an old(er) 8mm differential (narrow) tape drive (8505) they'd like to use for backups on a FreeBSD machine. Anybody have any recommendations on which SCSI controller they should use? H To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 1:10:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.SAIOS.COM (mail.SAIOS.COM [216.25.35.16]) by hub.freebsd.org (Postfix) with ESMTP id 8B72C155A1 for ; Tue, 5 Oct 1999 01:10:46 -0700 (PDT) (envelope-from cbri@saios.com) Received: from saios.com [206.48.227.133] by mail.SAIOS.COM with ESMTP (SMTPD32-5.05) id A27AF23027E; Tue, 05 Oct 1999 04:10:34 -0400 Message-ID: <37F9B358.6E90EE3F@saios.com> Date: Tue, 05 Oct 1999 10:14:16 +0200 From: Cyril Brion X-Mailer: Mozilla 4.07 [en] (WinNT; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: mount msdos help Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I wanted to mount my msdos partition on /tmp. But every time I want to do this, I have the message: /dev/wd0c: incorrect argument and: bad signature, bad bpb or something like this. What does mean these please? (Before that I mounted the partition without any problem, but I don't remember on which device) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 1:16:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bsd4us.org (cn386092-a.newcas1.de.home.com [24.40.46.90]) by hub.freebsd.org (Postfix) with ESMTP id 624DD14CB6 for ; Tue, 5 Oct 1999 01:16:19 -0700 (PDT) (envelope-from lgriffin@naviant.com) Received: from plato (IDENT:root@cn386092-a.newcas1.de.home.com [24.40.46.90]) by bsd4us.org (8.9.3/8.9.3) with SMTP id EAA03897 for ; Tue, 5 Oct 1999 04:16:18 -0400 (EDT) From: "Lyndon Griffin" To: Subject: newsyslog question Date: Tue, 5 Oct 1999 01:19:36 -0700 Message-ID: <002601bf0f0a$5c3d6400$7894a8c0@naviant.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG What is the recommended way to control when newsyslog rotates files? = What I mean by this is I would like to rotate a particular log weekly, = which is no problem - I figured that much out, but I want the rotation = to occur at 7pm, for example. If it matters, the machine is configured for the timezone I am in... = this is a 3.3-RELEASE box. Thanks, <:)=A0 Lyndon Griffin Systems Engineer |||=A0 Naviant=A0 ||| ******************************************** 100 buckets of bits on the bus=A0 100 buckets of bits Take one down, short it to ground FF buckets of bits on the bus=A0=A0 FF buckets of bits on the bus=A0=A0 FF buckets of bits Take one down, short it to ground FE buckets of bits on the bus...=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 1:34:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from compass.OregonVOS.net (compass.oregonvos.net [159.121.170.2]) by hub.freebsd.org (Postfix) with ESMTP id E3CE715565 for ; Tue, 5 Oct 1999 01:34:23 -0700 (PDT) (envelope-from th@huppi.com) Received: from sis.huppih.com (ppp1-ast.orednet.org [159.121.170.200]) by compass.OregonVOS.net (8.9.1/8.9.1) with ESMTP id BAA04581; Tue, 5 Oct 1999 01:31:58 -0700 (PDT) Received: from localhost (th@localhost) by sis.huppih.com (8.8.8/8.8.8) with ESMTP id BAA06447; Tue, 5 Oct 1999 01:48:10 -0700 (PDT) (envelope-from th@huppi.com) X-Authentication-Warning: sis.huppih.com: th owned process doing -bs Date: Tue, 5 Oct 1999 01:48:10 -0700 (PDT) From: Tom Huppi X-Sender: th@sis.huppih.com Reply-To: Tom Huppi To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3-Release - problem with PATH? In-Reply-To: <3.0.6.32.19991005010621.008fb560@mail.9netave.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999 chris@tourneyland.com wrote: > Thanks to everyone who told me about the wonderful rehash command. I firmly > believe it will completely change my life. Maybe, but I have seen it described in association with csh. bash, being backward compatible with bourne shell may not even require such acrobatics? OTOH, hashing the available executable list was presumably done in csh for efficiency and performance so the bash designers may have followed suit? man bash would tell I suppose. > I wonder why more make programs > don't have it as part of their rigamarole? Could a make script induce the shell which started it (it's parent process?) to rehash? Even if it could, it would be undesirable if make was started from a sh I would think. Anyway, I'm pretty sure that if you started a new shell in another xterm after make (or more precisely, make install), it would preform a hash as part of it's startup and therefore have access to the newly created executable. This could produce the potential for confusion if one was not vaugly cognisant of the nuances of process creation and shell design. > Maybe it takes a while. Oh well. Sorry to spam the list (again)... I'm just kind of in awe at the briliance of the designers of Unix right now! -Tom To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 2: 6:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from school.cs.indiana.edu (school.cs.indiana.edu [129.79.252.113]) by hub.freebsd.org (Postfix) with ESMTP id CD28214FE1; Tue, 5 Oct 1999 02:06:44 -0700 (PDT) (envelope-from jiachen@cs.indiana.edu) Received: from localhost (jiachen@localhost) by school.cs.indiana.edu (8.9.3/8.9.3/IUCS_2.28) with ESMTP id EAA13236; Tue, 5 Oct 1999 04:04:43 -0500 (EST) X-Authentication-Warning: school.cs.indiana.edu: jiachen owned process doing -bs Date: Tue, 5 Oct 1999 04:04:42 -0500 (EST) From: Jia-Huang Chen To: freebsd-newbies@FreeBSD.ORG Cc: freebsd-questions@FreeBSD.ORG Subject: FTP daemon error messages when use login In-Reply-To: <3.0.6.32.19991005010621.008fb560@mail.9netave.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I installed 4.0 current and use the default FTP server (Version 6.00LS). Every time when user try to connect to the box, it always shows the following similar messages in both root console and /var/log/messages: Oct 5 01:55:32 class ftpd[321]: no modules loaded for `ftpd' service Oct 5 01:55:32 class ftpd[321]: no modules loaded for `ftpd' service Oct 5 01:55:32 class ftpd[321]: no modules loaded for `ftpd' service Oct 5 01:55:32 class ftpd[321]: auth_pam: Permission denied Oct 5 01:55:32 class ftpd[321]: auth_pam: Permission denied Oct 5 01:55:32 class ftpd[321]: auth_pam: Permission denied What's wrong and could I avoid it ? thanks a bunch, Jia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 2:16:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id DC844155CC for ; Tue, 5 Oct 1999 02:15:29 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YQgj-00035j-00; Tue, 05 Oct 1999 11:15:13 +0200 From: Sheldon Hearn To: "Nathaniel Schein" Cc: "Freebsd Questions" Subject: Re: Upgrade In-reply-to: Your message of "Sat, 04 Sep 1999 12:18:52 MST." <8117aa1277b47179918b05627b26035237f8fda4@(null)> Date: Tue, 05 Oct 1999 11:15:13 +0200 Message-ID: <11886.939114913@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 04 Sep 1999 12:18:52 MST, "Nathaniel Schein" wrote: > After a make install, I rebooted and encounted the message > fatal trap rebooting in 9, 8, 7 .... Next time, provide the exact error message. :-) > After this I tried to boot to kernel.generic and the OS said kernel > module already loaded. What happened? unload kernel load kernel.GENERIC Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 2:20:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 55A0115076 for ; Tue, 5 Oct 1999 02:20:36 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YQlk-00038d-00; Tue, 05 Oct 1999 11:20:24 +0200 From: Sheldon Hearn To: big-sky@altavista.net Cc: "Freebsd-Questions" Subject: Re: colorls question In-reply-to: Your message of "Mon, 04 Oct 1999 13:08:23 EST." <000001bf0e93$7328d360$0201010a@cmr.net> Date: Tue, 05 Oct 1999 11:20:24 +0200 Message-ID: <12066.939115224@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 04 Oct 1999 13:08:23 EST, "Mark Einreinhof" wrote: > I have colorls installed. I would like to just type "ls" or "dir" to get the > equivalent of typing "colorls -G", or if I type "dir -al" I get > "colorls -Gal" equivalent results. I see you've had one reply to your question already, but it offers poor advice as far as clean system administration is concerned. The "pure" way to do this is to simply add the following line to your .profile: alias ls='colorls -G' It's best to leave your base system stuff alone. Also, it's not good practice to force one user's preference down the throats of the others. Even if you're the only user on your box, it's still a bad habit to get into. :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 2:54: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from internal.mail.demon.net (internal.mail.demon.net [193.195.224.3]) by hub.freebsd.org (Postfix) with ESMTP id 5C14B14CF8 for ; Tue, 5 Oct 1999 02:53:57 -0700 (PDT) (envelope-from fanf@demon.net) Received: from fanf.eng.demon.net (fanf.eng.demon.net [195.11.55.89]) by internal.mail.demon.net with ESMTP id KAA13340; Tue, 5 Oct 1999 10:53:51 +0100 (BST) Received: from fanf by fanf.eng.demon.net with local (Exim 3.03 #2) id 11YRHd-000ItM-00 for freebsd-questions@freebsd.org; Tue, 05 Oct 1999 10:53:21 +0100 From: Tony Finch To: freebsd-questions@freebsd.org Subject: execve and #! arguments Message-Id: Date: Tue, 05 Oct 1999 10:53:21 +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The manual page says: An interpreter file begins with a line of the form: #! interpreter [arg] When an interpreter file is execve'd, the system actually execve's the specified interpreter. If the optional arg is specified, it becomes the first argument to the interpreter, and the name of the originally execve'd file becomes the second argument; otherwise, the name of the originally execve'd file becomes the first argument. The original argu- ments are shifted over to become the subsequent arguments. The zeroth argument, normally the name of the execve'd file, is left unchanged. but FreeBSD allows more than one arg on the #! line, and as far as I can tell has done since before version 2.0. Other systems, including NetBSD, Linux, Solaris, Irix, 386BSD, and 4.3BSD-Reno, implement what the manual page says -- only one argument is passed from the #! line to the interpreter. Why the difference? Tony. -- f.a.n.finch dot@dotat.at fanf@demon.net Apache Software Foundation Member To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 3: 0:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailb.telia.com (mailb.telia.com [194.22.194.6]) by hub.freebsd.org (Postfix) with ESMTP id 075E014D4F for ; Tue, 5 Oct 1999 03:00:42 -0700 (PDT) (envelope-from fredrik.carlen@telia.com) Received: from d1o29.telia.com (root@d1o29.telia.com [194.236.214.241]) by mailb.telia.com (8.9.3/8.9.3) with ESMTP id MAA24392; Tue, 5 Oct 1999 12:00:29 +0200 (CEST) Received: from orcslayer.leonis.net (t1o29p40.telia.com [194.236.214.40]) by d1o29.telia.com (8.8.8/8.8.8) with SMTP id MAA26703; Tue, 5 Oct 1999 12:00:26 +0200 (CEST) From: Fredrik Carlen Reply-To: fredrik.carlen@telia.com To: Alex V P , Michael Kennett Subject: Re: How do I reinstall the Boot Manager? Date: Tue, 5 Oct 1999 12:01:35 +0200 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain Cc: fredrik.carlen@telia.com, freebsd-questions@FreeBSD.ORG References: MIME-Version: 1.0 Message-Id: <99100512021200.00281@orcslayer.leonis.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 04 Oct 1999, Alex V P wrote: > also , you can use read this: > http://www.freebsd.org/FAQ/install.html#AEN484 > alex Thanks, now I _really_ feel stupid! /Fredrik > On Mon, 4 Oct 1999, Michael Kennett wrote: > > > Hi Fredrik, > > > > The 'disklabel' command in *BSD can be used to install bootblocks onto the > > drive. Have a look at the man page. You might to boot FreeBSD from the > > floppy drive -- download a rescue disk from ftp..freebsd.org. > > > > Mike Kennett > > (mike@laurasia.com.au) > > > > > Howdy, pardners! > > > The issue here is really a well-known fact: Windows 95 is a pain in the > > > derriere to work with. Having said that, I will proceed to explain the problem > > > at hand: Windows 95 overwrote my Boot Manager yesterday, when I installed it on > > > my first Microsoft-partition. How do I reinstall the Boot Manager? > > > /Fredrik > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 3: 1:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailg.telia.com (mailg.telia.com [194.22.194.26]) by hub.freebsd.org (Postfix) with ESMTP id 9386114D4F for ; Tue, 5 Oct 1999 03:01:16 -0700 (PDT) (envelope-from fredrik.carlen@telia.com) Received: from orcslayer.leonis.net (t1o29p40.telia.com [194.236.214.40]) by mailg.telia.com (8.9.3/8.9.3) with SMTP id MAA25485 for ; Tue, 5 Oct 1999 12:01:12 +0200 (CEST) From: Fredrik Carlen Reply-To: fredrik.carlen@telia.com To: freebsd-questions@freebsd.org Subject: Re: How do I reinstall the Boot Manager? Date: Tue, 5 Oct 1999 12:02:26 +0200 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain References: MIME-Version: 1.0 Message-Id: <99100512025501.00281@orcslayer.leonis.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 04 Oct 1999, you wrote: > also , you can use read this: > http://www.freebsd.org/FAQ/install.html#AEN484 > alex > On Mon, 4 Oct 1999, Michael Kennett wrote: > > > Hi Fredrik, > > > > The 'disklabel' command in *BSD can be used to install bootblocks onto the > > drive. Have a look at the man page. You might to boot FreeBSD from the > > floppy drive -- download a rescue disk from ftp..freebsd.org. > > > > Mike Kennett > > (mike@laurasia.com.au) > > > > > Howdy, pardners! > > > The issue here is really a well-known fact: Windows 95 is a pain in the > > > derriere to work with. Having said that, I will proceed to explain the problem > > > at hand: Windows 95 overwrote my Boot Manager yesterday, when I installed it on > > > my first Microsoft-partition. How do I reinstall the Boot Manager? > > > /Fredrik > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 3:32:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from news-ma.rhein-neckar.de (news-ma.rhein-neckar.de [193.197.90.3]) by hub.freebsd.org (Postfix) with ESMTP id 7686215582 for ; Tue, 5 Oct 1999 03:31:42 -0700 (PDT) (envelope-from daemon@bigeye.rhein-neckar.de) Received: from bigeye.rhein-neckar.de (uucp@localhost) by news-ma.rhein-neckar.de (8.8.8/8.8.8) with bsmtp id MAA03250 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 12:31:25 +0200 (CEST) (envelope-from daemon@bigeye.rhein-neckar.de) Received: (from daemon@localhost) by bigeye.rhein-neckar.de (8.9.3/8.9.3) id LAA57177 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 11:08:24 +0200 (CEST) (envelope-from daemon) From: naddy@mips.rhein-neckar.de (Christian Weisgerber) Subject: Re: rc.local and comments Date: 5 Oct 1999 11:08:23 +0200 Message-ID: <7tcf67$1nqd$1@bigeye.rhein-neckar.de> References: <19991004160952.B10465@syru205-140.syr.edu> <199910042038.NAA71045@pau-amma.whistle.com> To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG David Wolfskill wrote: > >From: Chris Conrad > > > ># Put your local stuff here > > Actually, /usr/local/etc/rc.d might be a better place. To just start up , add an executable shell script called daemon.sh along the lines of #!/bin/sh [ -x /usr/local/sbin/daemon ] && /usr/local/sbin/daemon && echo -n ' daemon' -- Christian "naddy" Weisgerber naddy@mips.rhein-neckar.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 3:32:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from news-ma.rhein-neckar.de (news-ma.rhein-neckar.de [193.197.90.3]) by hub.freebsd.org (Postfix) with ESMTP id 44EA5155A1 for ; Tue, 5 Oct 1999 03:32:27 -0700 (PDT) (envelope-from daemon@bigeye.rhein-neckar.de) Received: from bigeye.rhein-neckar.de (uucp@localhost) by news-ma.rhein-neckar.de (8.8.8/8.8.8) with bsmtp id MAA03261 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 12:32:26 +0200 (CEST) (envelope-from daemon@bigeye.rhein-neckar.de) Received: (from daemon@localhost) by bigeye.rhein-neckar.de (8.9.3/8.9.3) id LAA57457 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 11:11:18 +0200 (CEST) (envelope-from daemon) From: naddy@mips.rhein-neckar.de (Christian Weisgerber) Subject: Re: recursive cat weirdness Date: 5 Oct 1999 11:11:17 +0200 Message-ID: <7tcfbl$1o39$1@bigeye.rhein-neckar.de> References: To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG wrote: > cat file1 file2 > file2 cat /dev/zero > file > I guess this is not a big deal but if someone wanted to be a jerk they > could just make two little files and eat up your disk space and CPU until > you noticed it running. You mean, they could just eat up their disk quota. -- Christian "naddy" Weisgerber naddy@mips.rhein-neckar.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 3:59:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from atlrel2.hp.com (atlrel2.hp.com [156.153.255.202]) by hub.freebsd.org (Postfix) with ESMTP id BC544155AC for ; Tue, 5 Oct 1999 03:57:50 -0700 (PDT) (envelope-from steveroo@mothra.bri.hp.com) Received: from mothra.bri.hp.com (steveroo@mothra.bri.hp.com [15.144.1.185]) by atlrel2.hp.com (8.8.6 (PHNE_17135)/8.8.5tis) with ESMTP id GAA10119; Tue, 5 Oct 1999 06:56:29 -0400 (EDT) Received: from localhost (steveroo@localhost) by mothra.bri.hp.com with ESMTP (8.8.6 (PHNE_17135)/8.7.1) id LAA21646; Tue, 5 Oct 1999 11:56:03 +0100 (BST) Date: Tue, 5 Oct 1999 11:56:03 +0100 (BST) From: Stephen Roome To: Kenneth Wayne Culver Cc: questions@freebsd.org Subject: Re: 3.2REL, 34Gb IDE + AMD K7 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Kenneth Wayne Culver wrote: > Well, with your setup with the cyls and heads and all, you have to make > sure that your custom kernel thinks you are using LBA, Generic actually > doesn't use any flags at all, what I would suggest doing (if you havn't > already) is taking all flags off the wdc0 and wdc1 devices, and step by > step adding each one in until you get a problem; then you will be able to > pinpoint the problem if it is with the flags. This is what I suspect, but > I can't be sure as the biggest drive I have is 8.4 GB. I set the flags for GENERIC in the startup userconfig to 0xb0ffb0ff, the flags have the desired affect so that LBA, DMA etc are recognized at startup. FreeBSD only seems to have a problem once it is actually using beyond 32Gb of the disk. (if I boot from GENERIC or CD.) i.e. as soon as I'm using the last partition on the disk if it is ufs. (dos partitions at the end don't matter, and windows98 is okay because I'm using the drivers supplied with the motherboard - although I'm not too sure I trust it all.) My thinking is that, and I could be (probably am) wrong : All the ide stuff needs to be fixed up so that cylinders aren't stored as an unsigned short, and basically ata4 support is included. [see /sys/i386/isa/wdreg.h] That's probably quite a bit of work though, but I really don't know... If anyone knows how difficult this is, or if anyone is working on it, then I'd be interested in hearing about it. Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 3:59:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mx.obninsk.com (mx.obninsk.com [195.90.137.3]) by hub.freebsd.org (Postfix) with ESMTP id 55D78155BB for ; Tue, 5 Oct 1999 03:59:13 -0700 (PDT) (envelope-from kostia@obninsk.com) Received: from kostya ([195.96.181.21]) by mx.obninsk.com (Netscape Messaging Server 3.5) with SMTP id 311 for ; Tue, 5 Oct 1999 15:03:42 +0400 Message-ID: <000801bf0f20$7f37d9c0$0a0a0a0a@kostya> From: kostia@obninsk.com To: Subject: Date: Tue, 5 Oct 1999 14:57:59 +0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01BF0F42.04236570" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2417.2000 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01BF0F42.04236570 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable I have computer on which there is Freebsd it works as router How can I prorate Internet traffic between several users ? e-mail: kostia@obninsk.com e-mail: kostya@obninsk.net icq 17067364 Programing | Linux Admin | Unix Admin =20 www.obninsk.net ------=_NextPart_000_0005_01BF0F42.04236570 Content-Type: text/html; charset="koi8-r" Content-Transfer-Encoding: quoted-printable
I have computer on which there is = Freebsd  it works as router
How can I prorate Internet = traffic between=20 several users ?
 
e-mail: kostia@obninsk.com
e-mail: kostya@obninsk.net
 
 icq 17067364
Programing = | Linux=20 Admin | Unix Admin =20
           &nb= sp;    =20 www.obninsk.net
------=_NextPart_000_0005_01BF0F42.04236570-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 4: 4:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pmc.ru (pmcserv.pmc.ru [195.19.14.3]) by hub.freebsd.org (Postfix) with ESMTP id A8F3A14FC3 for ; Tue, 5 Oct 1999 04:04:22 -0700 (PDT) (envelope-from vsg@pmc.ru) Received: from sv.pmc.ru (sv.pmc.ru [195.19.15.202]) by pmc.ru (8.9.3/8.9.3) with ESMTP id PAA19800 for ; Tue, 5 Oct 1999 15:02:51 +0400 (MSD) Received: from vsg (vsg.sv.pmc.ru [195.19.15.22]) by sv.pmc.ru (8.9.3/8.9.3) with SMTP id PAA21033 for ; Tue, 5 Oct 1999 15:02:49 +0400 (MSD) Message-ID: <000d01bf0f21$6b685400$160f13c3@vsg.sv.pmc.ru> From: "Vladimir Gordyunin" To: Subject: Syskonnect FDDI adapter Date: Tue, 5 Oct 1999 15:04:36 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1251" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi ! Does FreeBSD support SysKonnect FDDI EISA adapter ? TIA ---------------------------------------------------------------------------- - Vladimir Gordyunin vsg@pmc.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 4:25:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from tatooine.loxinfo.co.th (tatooine.loxinfo.co.th [203.146.61.203]) by hub.freebsd.org (Postfix) with ESMTP id DA4D715002 for ; Tue, 5 Oct 1999 04:25:22 -0700 (PDT) (envelope-from Note@tatooine.loxinfo.co.th) Received: from tatooine [203.146.61.203] by tatooine.loxinfo.co.th [127.0.0.1] with SMTP (MDaemon.v2.8.5.0.R) for ; Tue, 05 Oct 1999 18:22:14 +0700 Message-ID: <004301bf0f23$e01c8260$cb3d92cb@tatooine.loxinfo.co.th> From: "Note" To: Subject: Internal PnP modem Date: Tue, 5 Oct 1999 18:22:07 +0700 MIME-Version: 1.0 Content-Type: text/plain; charset="windows-874" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.31 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.31 X-MDaemon-Deliver-To: freebsd-questions@freebsd.org X-Return-Path: Note@tatooine.loxinfo.co.th Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have an Internal Modem Supra Express 336 SPi. Can I use it with FreeBSD. If so, how to? Thanks. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 4:40:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.netcologne.de (mail2.netcologne.de [194.8.194.103]) by hub.freebsd.org (Postfix) with ESMTP id 6114114C29 for ; Tue, 5 Oct 1999 04:40:38 -0700 (PDT) (envelope-from dr@domix.de) Received: from lamest.domix.de (dial12-158.netcologne.de [194.8.196.158]) by mail2.netcologne.de (8.9.3/8.9.3) with ESMTP id NAA21678 for ; Tue, 5 Oct 1999 13:40:35 +0200 (MET DST) Received: from domix.de (speed.localnet.lan [192.168.1.2]) by lamest.domix.de (8.9.3/8.9.3) with ESMTP id NAA60274 for ; Tue, 5 Oct 1999 13:32:02 +0200 (CEST) (envelope-from dr@domix.de) Received: (from dr@localhost) by domix.de (8.9.3/8.9.3) id NAA02098 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 13:39:01 +0200 (CEST) (envelope-from dr) Date: Tue, 5 Oct 1999 13:39:01 +0200 From: Dominik Rothert To: freebsd-questions@freebsd.org Subject: Re: sniffit Message-ID: <19991005133901.A2082@speed.localnet.lan> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i X-Encryption: PGP/GnuPG key available X-URL: http://www.domix.de X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jeroen Ruigrok/Asmodai wrote: > >When I do force sniffit to use ed0, it always give me a core dump. > >But when I force to use xl0 in same PC , output is okay. > >Buggy on ed0 ? > And probably solved in 3.x or CURRENT. Oct 5 13:29:45 lamest /kernel: pid 60262 (sniffit), uid 0: exited on signal 11 (core dumped) <3> root@lamest:~ # uname -r 3.2-RELEASE Are you sure about that? Best wishes, Domi "gotta read sniffit's source" nik. -- /* Dominik Rothert | Cologne BSD-Usergroup | Dr. LANG Internet Consulting * * dr@domix.de | dr@cbug.de | dr@lang-consulting.de * * www.domix.de | www.cbug.de | www.lang-consulting.de */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 4:47:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from silver.komanda.com.ua (silver.komanda.com.ua [212.68.162.138]) by hub.freebsd.org (Postfix) with ESMTP id 5FC6C1562D for ; Tue, 5 Oct 1999 04:46:45 -0700 (PDT) (envelope-from sysop@komanda.com.ua) Received: from silver.komanda.com.ua (silver.komanda.com.ua [212.68.162.138]) by silver.komanda.com.ua (8.8.8/8.8.8) with SMTP id OAA22241 for ; Tue, 5 Oct 1999 14:46:29 +0300 (EEST) (envelope-from sysop@komanda.com.ua) Date: Tue, 5 Oct 1999 14:46:29 +0300 (EEST) From: Alex Bulygin To: freebsd-questions@FREEBSD.ORG Subject: How to check CD image? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi folks! In the man page for Cdrecord there are some lines about how to check CD image on Solaris and Linux. However no any hints about FreeBSD. Or I misunderstand something? CD writer Yamaha4416CW, FreeBSD 3.3.2-stable, cdrecord and mkisofs from packages. Thanks for any idea. TIA, Alex. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:12:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id CFB0B155A8 for ; Tue, 5 Oct 1999 05:12:23 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.141]) by smtp05.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAB126; Tue, 5 Oct 1999 14:12:17 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA99316; Tue, 5 Oct 1999 14:10:49 +0200 (CEST) (envelope-from asmodai) Date: Tue, 5 Oct 1999 14:10:49 +0200 From: Jeroen Ruigrok/Asmodai To: Doug Cc: Christoph Kukulies , questions@freebsd.org Subject: Re: syslogd unknown priority name "" Message-ID: <19991005141049.I98066@daemon.ninth-circle.org> References: <199910040940.LAA39225@gil.physik.rwth-aachen.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991004 22:44], Doug (Doug@gorean.org) wrote: > Check for spaces in your /etc/syslog.conf file. > >Good luck, Duh. The obvious I forgot to mention. Thanks for pointing it out as well Doug. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best We must all hang together, else we shall all hang separately. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:12:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id 64FA3155B2 for ; Tue, 5 Oct 1999 05:12:38 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.141]) by smtp05.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC126; Tue, 5 Oct 1999 14:12:30 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA99309; Tue, 5 Oct 1999 14:09:07 +0200 (CEST) (envelope-from asmodai) Date: Tue, 5 Oct 1999 14:09:06 +0200 From: Jeroen Ruigrok/Asmodai To: Kenneth Wayne Culver Cc: "Erik S. Carlsten" , freebsd-questions@FreeBSD.ORG Subject: Re: Diamond Monster Sound MX300 Message-ID: <19991005140906.H98066@daemon.ninth-circle.org> References: <19991004230031.F96050@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991005 12:13], Kenneth Wayne Culver (culverk@wam.umd.edu) wrote: >Yes I know this, I'm running -CURRENT right now, and have been for about a >year and a half now. The 8820 (Aureal Vortex) driver isn't done yet. >Cameron grant told me. Ahh, ok. Could be =) I just looked at /usr/src/sys/dev/pcm/pci/aureal.* =) -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best From Nothing comes only Nothing... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:14:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from butler-se.pnu.com (butler-se.pnu.com [193.235.229.100]) by hub.freebsd.org (Postfix) with ESMTP id EEBDF14EDC for ; Tue, 5 Oct 1999 05:13:29 -0700 (PDT) (envelope-from Jerker.jorbrand@eu.pnu.com) Received: from inet-1.pnu.com (inet-1.pnu.com [192.36.176.26]) by butler-se.pnu.com (8.8.8+Sun/8.8.8) with ESMTP id OAA20023 for ; Tue, 5 Oct 1999 14:13:21 +0200 (MET DST) Received: from itat002031 by inet-1.pnu.com (8.8.8/1.1.22.3/29Jun99-0950AM) id OAA0000025318; Tue, 5 Oct 1999 14:13:19 +0200 (MET DST) Message-ID: <000701bf0f2a$f254f3c0$6053640a@itat002031.sesto.eu.pnu.com> From: "Jerker" To: Subject: Manual Date: Tue, 5 Oct 1999 14:12:45 +0200 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0004_01BF0F3B.B1ED28A0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0004_01BF0F3B.B1ED28A0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable HI! I have a little question concerning the manual that is online, Is it = possible for me to download the whole manual in a single .html or .pdf = file,,, or something... P.S. Please reply to Mailto:Jerker.jorbrand@connecta.se Greatings=20 // Jerker ------=_NextPart_000_0004_01BF0F3B.B1ED28A0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
HI!
 
I have a little question concerning = the manual=20 that is online, Is it possible for me to download the whole manual in a = single=20 .html or .pdf file,,,    or something...
 
P.S. Please reply to Mailto:Jerker.jorbrand@connec= ta.se
 
Greatings
//   = Jerker
------=_NextPart_000_0004_01BF0F3B.B1ED28A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:14:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from golf.dax.net (golf.dax.net [193.216.69.103]) by hub.freebsd.org (Postfix) with ESMTP id 255CC15578 for ; Tue, 5 Oct 1999 05:14:17 -0700 (PDT) (envelope-from RoHaN-1@treider.no) Received: from treider.no ([193.217.61.254]) by golf.dax.net (8.9.3/8.9.3) with ESMTP id OAA27425 for ; Tue, 5 Oct 1999 14:15:02 +0200 (MET DST) Received: from OTTO/SpoolDir by treider.no (Mercury 1.44); 5 Oct 99 14:13:47 +0100 Received: from SpoolDir by OTTO (Mercury 1.44); 5 Oct 99 14:13:26 +0100 From: "Hansen Roy-Kristian Tingvoll" To: freebsd-questions@FreeBSD.ORG Date: Tue, 5 Oct 1999 14:13:24 +0100 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: About Riva TNT2 X-mailer: Pegasus Mail for Windows (v2.54) Message-ID: <60B6971643@treider.no> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Where can I get some driverse to my Creative TNT2 Ultra graficgard?? Greatings From Roy Norway To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:21: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id A2038155C2 for ; Tue, 5 Oct 1999 05:20:45 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.141]) by smtp05.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAAC22; Tue, 5 Oct 1999 14:20:17 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA99355; Tue, 5 Oct 1999 14:18:51 +0200 (CEST) (envelope-from asmodai) Date: Tue, 5 Oct 1999 14:18:51 +0200 From: Jeroen Ruigrok/Asmodai To: Cyril Brion Cc: freebsd-questions@FreeBSD.ORG Subject: Re: mount msdos help Message-ID: <19991005141851.K98066@daemon.ninth-circle.org> References: <37F9B358.6E90EE3F@saios.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37F9B358.6E90EE3F@saios.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991005 12:13], Cyril Brion (cbri@saios.com) wrote: >I wanted to mount my msdos partition on /tmp. >But every time I want to do this, I have the message: >/dev/wd0c: incorrect argument >and: >bad signature, bad bpb or something like this. >What does mean these please? >(Before that I mounted the partition without any problem, but I don't >remember on which device) I you already have /tmp as part of your basesystem you cannot mount on top of it. Instead try to mount it to /mnt As an aside, if you could mount the MSDOS disk over /tmp it will be fun to see the chaos which would start as soon as applications wanted to use /tmp. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best I believe because it is Impossible... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:21: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id DB1E8155C3 for ; Tue, 5 Oct 1999 05:20:45 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.141]) by smtp05.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AABC22; Tue, 5 Oct 1999 14:20:25 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA99362; Tue, 5 Oct 1999 14:20:37 +0200 (CEST) (envelope-from asmodai) Date: Tue, 5 Oct 1999 14:20:37 +0200 From: Jeroen Ruigrok/Asmodai To: Juan Luis montes Ruiz Cc: freebsd-questions@FreeBSD.ORG Subject: Re: no se como suscribirme a la lista de correo Message-ID: <19991005142037.L98066@daemon.ninth-circle.org> References: <3.0.5.32.19991005010421.007bde00@acnet.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <3.0.5.32.19991005010421.007bde00@acnet.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991005 12:13], Juan Luis montes Ruiz (juanluis@acnet.net) wrote: > > >Hola Hola! > >he tratado de suscribirme a la lista de correo perono he podido. >porfavor digame quee s lo que devo de poner en el correo para que me suscriba > >siempre me manda este error: > > > >>>>> subscribe >**** subscribe: unknown list ''. >>>>> Atte. >**** Command 'atte.' not recognized. >>>>> Juan Luis Montes >**** Command 'juan' not recognized. >>>>> Nodo Tapachula >**** Command 'nodo' not recognized. >**** Help for Majordomo@es.freebsd.org: For freebsd-questions try: To: majordomo@freebsd.org Subject: subscribe freebsd-questions end -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Veni, Vidi, Vici. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:21:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 085A7155E0 for ; Tue, 5 Oct 1999 05:20:55 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YTaA-0006Ny-00; Tue, 5 Oct 1999 13:20:38 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id NAA19396 for ; Tue, 5 Oct 1999 13:20:38 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 13:20:38 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: ppp permissions Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG What permissions do i need to set to allow any user to connect with ppp? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:21:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp05.wxs.nl (smtp05.wxs.nl [195.121.6.57]) by hub.freebsd.org (Postfix) with ESMTP id 11368155E4 for ; Tue, 5 Oct 1999 05:21:03 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.141]) by smtp05.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AACC22; Tue, 5 Oct 1999 14:20:36 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id OAA99351; Tue, 5 Oct 1999 14:16:57 +0200 (CEST) (envelope-from asmodai) Date: Tue, 5 Oct 1999 14:16:57 +0200 From: Jeroen Ruigrok/Asmodai To: Wesley Parish Cc: questions@freebsd.org Subject: Re: BSD OSI protocol stack Message-ID: <19991005141657.J98066@daemon.ninth-circle.org> References: <19991005041705.78788.qmail@hotmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991005041705.78788.qmail@hotmail.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991005 12:13], Wesley Parish (parishw@hotmail.com) wrote: >I'm afraid this mightn't be considered a bona fide FreeBSD (only) question ( >more of a generic *BSD question ), but I'm interested in porting some TCP\IP >stuff to OSI, eg, fsp, fping, etc, for a private project I'm fooling around >with. I don't have any OSI documentation, and the fourth ed of Stalling's >Data and Computer Communications is decidedly sparse. I like Marshall >Rose's stuff - I've got his Simple Book - but his OSI book, the Open Book is >probably out of print. Doesn't matter. I am still wanting to revive netiso. =) >For TCP\IP, I'm using Stevens' TCP\IP Illustrated, and it fits the bill. I >just need OSI information. Do you know who could help? ISO has it all. I still need to purchase the information myself. www.iso.ch IIRC. Only place you could try to look is: OpenBSD: /usr/src/sys/netiso NetBSD: /usr/src/sys/netiso FreeBSD: /usr/src/sys/netiso [prolly in the Attic] HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best In every colour there's the Light... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:30: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id DF964155C9 for ; Tue, 5 Oct 1999 05:29:48 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id IAA02458; Tue, 5 Oct 1999 08:20:40 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Tue, 5 Oct 1999 08:20:40 -0400 (EDT) From: Alex V P To: Cyril Brion Cc: freebsd-questions@FreeBSD.ORG Subject: Re: mount msdos help In-Reply-To: <37F9B358.6E90EE3F@saios.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG syntax: mount -t msdos /dev/slice_name /tmp/mnt_point whould do the job. Can you be more specific about eror message? alex On Tue, 5 Oct 1999, Cyril Brion wrote: > I wanted to mount my msdos partition on /tmp. > But every time I want to do this, I have the message: > /dev/wd0c: incorrect argument > and: > bad signature, bad bpb or something like this. > What does mean these please? > (Before that I mounted the partition without any problem, but I don't > remember on which device) > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:35:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id CC08014BEA for ; Tue, 5 Oct 1999 05:35:35 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id IAA02467; Tue, 5 Oct 1999 08:25:11 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Tue, 5 Oct 1999 08:25:10 -0400 (EDT) From: Alex V P To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connections problems In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG i used to work for an ISP and most of the dialups were disconnected for idle time after 15m. my solution was something like: ping -i 60 xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the router of the isp. it was working 99% of the time.In most cases that was happening in the places where dialups were going on ASCEND MAX routers. maybe this will help alex On Tue, 5 Oct 1999, J McKitrick wrote: > I'm having a problem with both of my ISP's. One is PAP, one is not, one > is local, one is not. But both seem to cut out after about ten minutes. > ANy idea why? I don't rememeber this happening with windows. > > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 5:59:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id B278715015 for ; Tue, 5 Oct 1999 05:59:14 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YUBS-000Ilx-00; Tue, 5 Oct 1999 13:59:10 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id NAA19655; Tue, 5 Oct 1999 13:59:06 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 13:59:06 +0100 (BST) From: J McKitrick To: Alex V P Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connections problems In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I remember seeing Ascend on the login screen. But i am never idle. I am always using the connection, so i don't see why it cuts off. And this never happens in windows. -jm On Tue, 5 Oct 1999, Alex V P wrote: >i used to work for an ISP and most of the dialups were disconnected for >idle time after 15m. my solution was something like: >ping -i 60 xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the router of the isp. >it was working 99% of the time.In most cases that was happening in the places >where dialups were going on ASCEND MAX routers. >maybe this will help >alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 6: 0:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailhub.psn.ie (mailhub.psn.ie [194.106.150.254]) by hub.freebsd.org (Postfix) with ESMTP id 0C6C114F74 for ; Tue, 5 Oct 1999 06:00:05 -0700 (PDT) (envelope-from cillian@mailhub.psn.ie) Received: from cillian (helo=localhost) by mailhub.psn.ie with local-esmtp (Exim 2.12 #3) id 11YTi9-000G01-00 for questions@freebsd.org; Tue, 5 Oct 1999 13:28:53 +0100 Date: Tue, 5 Oct 1999 13:28:53 +0100 (IST) From: Cillian Sharkey To: questions@freebsd.org Subject: SquidGuard on FreeBSD ? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Has anyone got squidguard-1.1.0 to compile on FreeBSD ? ( Unfortunately, it's not in the ports collection ) Basically it refuses to see the berkeley DB libs/include files even when I force it to look in the right place when running the configure script : ./configure --with-db=/usr/local --with-db-lib=/usr/lib \ --with-db-inc=/usr/local/include I installed db-2.7.5 from the ports collecton, the squidguard program requires version 2.X it says in the docs. and the db-2.7.5 installs everthing in the above mentioned dirs.. Thanks in advance, Cillian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 6:17:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from po3.wam.umd.edu (po3.wam.umd.edu [128.8.10.165]) by hub.freebsd.org (Postfix) with ESMTP id 1C97615211 for ; Tue, 5 Oct 1999 06:17:34 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac4.wam.umd.edu (root@rac4.wam.umd.edu [128.8.10.144]) by po3.wam.umd.edu (8.9.3/8.9.3) with ESMTP id JAA13487; Tue, 5 Oct 1999 09:16:36 -0400 (EDT) Received: from rac4.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac4.wam.umd.edu (8.9.3/8.9.3) with SMTP id JAA10582; Tue, 5 Oct 1999 09:16:40 -0400 (EDT) Received: from localhost (culverk@localhost) by rac4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id JAA10578; Tue, 5 Oct 1999 09:16:40 -0400 (EDT) X-Authentication-Warning: rac4.wam.umd.edu: culverk owned process doing -bs Date: Tue, 5 Oct 1999 09:16:40 -0400 (EDT) From: Kenneth Wayne Culver To: Stephen Roome Cc: questions@freebsd.org Subject: Re: 3.2REL, 34Gb IDE + AMD K7 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I might suggest using FreeBSD 4.0-CURRENT if that's not a production Box. It has a new ATA driver that might work. you may want to repost the original message and ask if there are known problems, I would've thought that if you got BIOS to use it properly, FreeBSD would've gotten it to work too. This is a dmesg output for my computer to show you what the ata driver detects as: ata-pci0: at device 7.1 on pci0 ata-pci0: Busmastering DMA supported ata0 at 0x01f0 irq 14 on ata-pci0 ata1 at 0x0170 irq 15 on ata-pci0 ad0: ATA-4 disk at ata0 as master ad0: 8063MB (16514064 sectors), 16383 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 0 depth queue, UDMA33 Creating DISK ad0 Creating DISK wd0 ad1: ATA-3 disk at ata0 as slave ad1: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 0 depth queue, UDMA33 Creating DISK ad1 Creating DISK wd1 ad2: ATA-3 disk at ata1 as master ad2: 6187MB (12672450 sectors), 13410 cyls, 15 heads, 63 S/T, 512 B/S ad2: 16 secs/int, 0 depth queue, UDMA33 Creating DISK ad2 Creating DISK wd2 acd0: CDROM drive at ata1 as slave , 128KB buffer, PIO acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data/audio disc loaded, unlocked That's the full output from a dmesg. If you think this driver would help you, go ahead and upgrade to -CURRENT, but be careful, this driver is beta. I'm also not sure that the wdc driver knows about your harddrive controller, I don't think anyone has done anything for the chip that AMD supplies with the K7 yet. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Tue, 5 Oct 1999, Stephen Roome wrote: > On Mon, 4 Oct 1999, Kenneth Wayne Culver wrote: > > Well, with your setup with the cyls and heads and all, you have to make > > sure that your custom kernel thinks you are using LBA, Generic actually > > doesn't use any flags at all, what I would suggest doing (if you havn't > > already) is taking all flags off the wdc0 and wdc1 devices, and step by > > step adding each one in until you get a problem; then you will be able to > > pinpoint the problem if it is with the flags. This is what I suspect, but > > I can't be sure as the biggest drive I have is 8.4 GB. > > > I set the flags for GENERIC in the startup userconfig to 0xb0ffb0ff, the flags > have the desired affect so that LBA, DMA etc are recognized at startup. > > FreeBSD only seems to have a problem once it is actually using beyond 32Gb of > the disk. (if I boot from GENERIC or CD.) i.e. as soon as I'm using the last > partition on the disk if it is ufs. (dos partitions at the end don't matter, > and windows98 is okay because I'm using the drivers supplied with the > motherboard - although I'm not too sure I trust it all.) > > My thinking is that, and I could be (probably am) wrong : > > All the ide stuff needs to be fixed up so that cylinders aren't stored as an > unsigned short, and basically ata4 support is included. > [see /sys/i386/isa/wdreg.h] > > That's probably quite a bit of work though, but I really don't know... > > If anyone knows how difficult this is, or if anyone is working on it, then > I'd be interested in hearing about it. > > Steve > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 6:28:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from atlrel2.hp.com (atlrel2.hp.com [156.153.255.202]) by hub.freebsd.org (Postfix) with ESMTP id C2C7815775 for ; Tue, 5 Oct 1999 06:28:41 -0700 (PDT) (envelope-from steveroo@mothra.bri.hp.com) Received: from mothra.bri.hp.com (steveroo@mothra.bri.hp.com [15.144.1.185]) by atlrel2.hp.com (8.8.6 (PHNE_17135)/8.8.5tis) with ESMTP id JAA22976; Tue, 5 Oct 1999 09:27:45 -0400 (EDT) Received: from localhost (steveroo@localhost) by mothra.bri.hp.com with ESMTP (8.8.6 (PHNE_17135)/8.7.1) id OAA22845; Tue, 5 Oct 1999 14:27:15 +0100 (BST) Date: Tue, 5 Oct 1999 14:27:15 +0100 (BST) From: Stephen Roome To: Kenneth Wayne Culver Cc: questions@freebsd.org Subject: Re: 3.2REL, 34Gb IDE + AMD K7 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Kenneth Wayne Culver wrote: > I might suggest using FreeBSD 4.0-CURRENT if that's not a production Box. > It has a new ATA driver that might work. you may want to repost the > original message and ask if there are known problems, I would've thought > that if you got BIOS to use it properly, FreeBSD would've gotten it to > work too. This is a dmesg output for my computer to show you what the ata > driver detects as: I think this is what I'll do, need to get hold of a snapshot cd ideally though because I've only got a cruddy modem, and even cvsup will take a while. > That's the full output from a dmesg. Looks similar to mine, I'm just suffering somewhere in one of the translation stages I beleive. > If you think this driver would help you, go ahead and upgrade to -CURRENT, > but be careful, this driver is beta. I'm also not sure that the wdc driver > knows about your harddrive controller, I don't think anyone has done > anything for the chip that AMD supplies with the K7 yet. If this looks good (I'll check out the cvs repos.) then I'll cvsup 3.3 and try mangling the new driver back in that at some point, for the meantime I think I'm going to stick with only the first 32GB available to FreeBSD. (even if that's not really the problem, it's when I try to use >32GB under FreeBSD that things go nasty.) As far as specific K7 support in FreeBSD, it works fine, a make world taking 47 minutes with a GENERIC kernel. (3.2 with -O -pipe). Don't know if I should expect more or less though.. (not really bothered, it's quick enough!) I might put a couple of lines into sys/i386/i386/identcpu, so that it's at least detected properly, and maybe see if I can check that cacheing etc. is being done properly, but I think that the K7 really needs to be treated more differently than a PPro (standard 686 class) to utilise it's features properly. Thanks for all your help and advice, Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 6:33:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id 31BDD15773 for ; Tue, 5 Oct 1999 06:33:23 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id JAA15998; Tue, 5 Oct 1999 09:32:12 -0400 (EDT) (envelope-from mwlucas) Message-Id: <199910051332.JAA15998@blackhelicopters.org> Subject: Re: Manual In-Reply-To: <000701bf0f2a$f254f3c0$6053640a@itat002031.sesto.eu.pnu.com> from Jerker at "Oct 5, 1999 2:12:45 pm" To: Jerker.jorbrand@eu.pnu.com (Jerker) Date: Tue, 5 Oct 1999 09:32:12 -0400 (EDT) Cc: freebsd-questions@freebsd.org, Jerker.jorbrand@connecta.se From: mwlucas@gltg.com X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, Take a look at ftp://ftp.freebsd.org/pub/FreeBSD/docs/ . From there, you can choose your format. ==ml > HI! > > I have a little question concerning the manual that is online, Is it possible for me to download the whole manual in a single .html or .pdf file,,, or something... > > P.S. Please reply to Mailto:Jerker.jorbrand@connecta.se > > Greatings > // Jerker To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 7: 1:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id 17C2615643 for ; Tue, 5 Oct 1999 07:01:12 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id JAA16088; Tue, 5 Oct 1999 09:59:50 -0400 (EDT) (envelope-from mwlucas) Message-Id: <199910051359.JAA16088@blackhelicopters.org> Subject: Re: ppp permissions In-Reply-To: from J McKitrick at "Oct 5, 1999 1:20:38 pm" To: jcm@dogma.freebsd-uk.eu.org (J McKitrick) Date: Tue, 5 Oct 1999 09:59:50 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG From: mwlucas@gltg.com X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Incoming or outgoing? > What permissions do i need to set to allow any user to connect with ppp? > > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 7:33:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 9296914D58 for ; Tue, 5 Oct 1999 07:33:02 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YVe3-00099M-00; Tue, 5 Oct 1999 15:32:47 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id PAA20582; Tue, 5 Oct 1999 15:32:46 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 15:32:46 +0100 (BST) From: J McKitrick To: mwlucas@gltg.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ppp permissions In-Reply-To: <199910051359.JAA16088@blackhelicopters.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Outgoing ppp -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 7:54:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from wop21.wop.wtb.tue.nl (wop21.wop.wtb.tue.nl [131.155.56.216]) by hub.freebsd.org (Postfix) with ESMTP id AB8CA14FC3 for ; Tue, 5 Oct 1999 07:54:10 -0700 (PDT) (envelope-from karelj@wop21.wop.wtb.tue.nl) Received: (from karelj@localhost) by wop21.wop.wtb.tue.nl (8.9.3/8.9.3) id QAA08116 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 16:52:32 +0200 (CEST) (envelope-from karelj) Date: Tue, 5 Oct 1999 16:52:32 +0200 From: Karel Joop Bosschaart To: freebsd-questions@freebsd.org Subject: Re: CRASH, CRASH AND CRASH Message-ID: <19991005165231.A7939@wop21.wop.wtb.tue.nl> Reply-To: K.J.Bosschaart@wtb.tue.nl References: <199910050426.NAA31995@unix.knu.ac.kr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <199910050426.NAA31995@unix.knu.ac.kr> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 01:26:56PM +0900, Huidae Cho wrote: > > When X-Window crashed, I couldn't switch to any consoles. Perfect CRASH and > hard reboot. > > I want to use FreeBSD, however FreeBSD crashes more than Linux does. > Please help me. Did you try to telnet to the machine? In the past I experienced a lot of X crashes where I couldn't get to the console, but a telnet from another machine always worked (so *X* crashed, not FreeBSD). Kill X and restart X. In some cases however the consoles disappeared which could only be reset by rebooting (a *soft* reboot). Of course, if your machine isn't connected to another one, it is effectively a crash :-(. Regards, Karel. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 7:54:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from blackhelicopters.org (geburah.blackhelicopters.org [209.69.178.18]) by hub.freebsd.org (Postfix) with ESMTP id C27F914DB4 for ; Tue, 5 Oct 1999 07:54:54 -0700 (PDT) (envelope-from mwlucas@blackhelicopters.org) Received: (from mwlucas@localhost) by blackhelicopters.org (8.9.3/8.9.3) id KAA16379; Tue, 5 Oct 1999 10:52:13 -0400 (EDT) (envelope-from mwlucas) Message-Id: <199910051452.KAA16379@blackhelicopters.org> Subject: Re: ppp permissions In-Reply-To: from J McKitrick at "Oct 5, 1999 3:32:46 pm" To: jcm@dogma.freebsd-uk.eu.org (J McKitrick) Date: Tue, 5 Oct 1999 10:52:13 -0400 (EDT) Cc: mwlucas@gltg.com, freebsd-questions@FreeBSD.ORG From: mwlucas@gltg.com X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG You're better off using userland ppp with the -auto switch. If you want to allow your users to dial out on command, look at /usr/share/example/ppp/ppp.conf.sample. You don't want to use permissions to accomplish this; consider the "allow " keyword instead. ==ml > Outgoing ppp > > -jm > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 7:57: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.inter.net.il (parker.inter.net.il [192.116.192.53]) by hub.freebsd.org (Postfix) with ESMTP id 11B7914C0F for ; Tue, 5 Oct 1999 07:56:57 -0700 (PDT) (envelope-from lhyenson@inter.net.il) Received: from inter.net.il ([192.117.143.163]) by mail.inter.net.il (8.9.3/8.8.6/PA) with ESMTP id QAA17867 for ; Tue, 5 Oct 1999 16:32:29 +0200 (IST) Message-ID: <37FA0A4A.C00384B2@inter.net.il> Date: Tue, 05 Oct 1999 16:25:16 +0200 From: Henson Family X-Mailer: Mozilla 4.5 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: randomly change splash screen Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi there, I finally decided to have the splash screen on startup. worked fine and i even added vesa to the kernel for the 640x400 to be possible. also worked fine. (liked the starwars splash screens). anyway, i wanted to 'randomly change splash screen' so i thought it should be relatively easy. all i need to do is write a script that on shutdown copies a randomly selected bitmap(or pcx) file and copy to boot/splash.bmp . it's so simple i'm sure some have you have already done such a thing. unfortunately i have absolutely no knowledge of scripting so i decided to write this so you could assist me or just send me the ready script if you have it. Thanks a bunch, Alon P.S. - i am not subscribed to questions so please remember to reply to my e-mail address as well. P.S.S - as i was going through the example pictures to choose the splash screen from, i noticed that many of them have the text freebsd 3.1 . obviouslyseriously outdated. someone with gimp should add 3.3. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8: 5: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from defiant.quansoo.com (defiant.quansoo.com [63.66.225.90]) by hub.freebsd.org (Postfix) with ESMTP id EE34414D67 for ; Tue, 5 Oct 1999 08:05:00 -0700 (PDT) (envelope-from cgriffiths@quansoo.com) Received: from localhost (cgriffiths@localhost) by defiant.quansoo.com (8.9.3/8.9.3) with ESMTP id LAA02427; Tue, 5 Oct 1999 11:04:43 -0400 (EDT) (envelope-from cgriffiths@quansoo.com) X-Authentication-Warning: defiant.quansoo.com: cgriffiths owned process doing -bs Date: Tue, 5 Oct 1999 11:04:42 -0400 (EDT) From: "Christopher T. Griffiths" To: Darren Foo Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Reading MS Word files In-Reply-To: <37F944C5.42AFD597@ca.webct.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Try setting up VNC. It was developed by ATT labs. Similar to pcanywhere but much better and it runs on Unix. The linux version will run under emulation and you can control your WinX desktop with it. Here is the url: http://www.uk.research.att.com/vnc/ Chris On Mon, 4 Oct 1999, Darren Foo wrote: > Are there any programs available for Windows that would serve as a > X-server? I want to read MS Word and Office documents but MS support > under unix has been lacking. I'm aware of the Netcenter Wincenter and > Citrix Metaframe solution but that costs megabucks. Does anyone know of > any alternatives? > > > -- > Darren Foo > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Christopher T. Griffiths Senior Network/Systems Administrator Quansoo Group Inc. cgriffiths@quansoo.com Phone: (302) 777-4141 Fax: (302) 777-4142 Mobile: (302) 521-3436 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8: 9: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.wolves.k12.mo.us (mail.wolves.k12.mo.us [207.160.214.1]) by hub.freebsd.org (Postfix) with ESMTP id 6CB2415663 for ; Tue, 5 Oct 1999 08:09:04 -0700 (PDT) (envelope-from cdillon@wolves.k12.mo.us) Received: from mail.wolves.k12.mo.us (cdillon@mail.wolves.k12.mo.us [207.160.214.1]) by mail.wolves.k12.mo.us (8.9.3/8.9.2) with ESMTP id KAA37891; Tue, 5 Oct 1999 10:07:21 -0500 (CDT) (envelope-from cdillon@wolves.k12.mo.us) Date: Tue, 5 Oct 1999 10:07:21 -0500 (CDT) From: Chris Dillon To: Yusuf Goolamabbas Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Trying to achieve zen with natd In-Reply-To: <19991005045350.11294.qmail@yusufg.portal2.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The freebsd-net mailing list has been trimmed, since it probably isn't wholly appropriate to this question: On 5 Oct 1999, Yusuf Goolamabbas wrote: > Hi, I have a FreeBSD 3.3-stable box with 2 NIC cards each bound to > static IP's and different ISP WAN interfaces (fxp0 and fxp1) > fxp0 is connected to a /25 network > fxp1 is connected to a /26 network > > Default router is fxp1 That doesn't really make any sense... Is fxp1 attached to your private network, or the public network? > I would like to configure this box to act as a NATD box. Set the right > kernel config and recompile the kernel > > /etc/rc.conf > > gateway_enable="YES" > firewall_enable="YES" > firewall_type="open" > natd_enable = "YES" > natd_interface = "fxp1" #Assuming this will take the public interface > natd_flags = "-u" The natd_interface does indeed take the public interface, but that isn't what you seem to be indicating below.... > I did the following in /etc/rc.local > > ifconfig fxp1 alias 192.168.0.1 netmask 255.255.255.0 You don't need to, and probably shouldn't, do this in /etc/rc.local. Add a line like this to /etc/rc.conf: ifconfig_fxp1_alias0="inet 192.168.0.1 netmask 255.255.255.0" > Setup a Windows box with IP 192.168.0.2 and gateway 192.168.0.1 > I can ping the gateway box, however I can't seem to get out to either > the /25 network or the /26 network This would seem to indicate fxp1 is your private interface, not the public interface. If so, change natd_interface to fxp0 (assuming it is your public interface). You appear to have everything else correct. If you are attempting to put the machines to be NATted (is that a new verb?) on the public network but part of an unregistered subnet, that is possible, but you would need to specify natd_interface="the.public.ip.address" instead of the interface name. > What am I missing ?? > > Thanks, Yusuf > > -- > Yusuf Goolamabbas > yusufg@outblaze.com -- Chris Dillon - cdillon@wolves.k12.mo.us - cdillon@inter-linc.net FreeBSD: The fastest and most stable server OS on the planet. For Intel x86 and Alpha architectures (SPARC under development). ( http://www.freebsd.org ) "One should admire Windows users. It takes a great deal of courage to trust Windows with your data." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:12: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 013B615216 for ; Tue, 5 Oct 1999 08:12:03 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id LAA02768; Tue, 5 Oct 1999 11:01:45 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Tue, 5 Oct 1999 11:01:45 -0400 (EDT) From: Alex V P To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connections problems In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG i said that not because i didn't believed you, but because I was dealing with ascends for a while. I spend hours on the phone with their tech support ( calls like that cost) and change their firmware couple of times. after all, my opinion is if nobody can explain something, somethings fishy about that. according to me, you have 2 choices: 1' go back to windows, adn enjoy in life till dooms day. 2' go to 1 in most cases, if I were you, a would've call my ISP, jump on sysadmins ass ( like they were jumping on mine) until you find a solution. but before you do that , i hope u have enough knowledge so you can back up your words so you won't be one among the others ( u know, my mouse won't work, how can I print from IE5.x2345 or how to save file). i guess I hate winblows and anything when someone is comparing us ( unix) with them. i'm using Freebsd box with the firewall ( 10 computers in the lan at home) via dialup online, because I don't need fast connection from home. I stay up for days ( dedicated connections 24/7) without loosing my link. When I use windows, it cuts me off, every 15 minutes. Can u explain this? alex p.s. my english is bad, i know, no ned to remind me ;-) On Tue, 5 Oct 1999, J McKitrick wrote: > I remember seeing Ascend on the login screen. But i am never idle. I am > always using the connection, so i don't see why it cuts off. And this > never happens in windows. > > -jm > > On Tue, 5 Oct 1999, Alex V P wrote: > > >i used to work for an ISP and most of the dialups were disconnected for > >idle time after 15m. my solution was something like: > >ping -i 60 xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the router of the isp. > >it was working 99% of the time.In most cases that was happening in the places > >where dialups were going on ASCEND MAX routers. > >maybe this will help > >alex > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:16:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from nimitz.ca.sandia.gov (nimitz.ca.sandia.gov [146.246.243.56]) by hub.freebsd.org (Postfix) with ESMTP id 1D95E155E4 for ; Tue, 5 Oct 1999 08:16:05 -0700 (PDT) (envelope-from bmah@nimitz.ca.sandia.gov) Received: (from bmah@localhost) by nimitz.ca.sandia.gov (8.9.3/8.9.3) id IAA18979; Tue, 5 Oct 1999 08:13:32 -0700 (PDT) Message-Id: <199910051513.IAA18979@nimitz.ca.sandia.gov> X-Mailer: exmh version 2.1.0 09/18/1999 To: "Christopher T. Griffiths" Cc: Darren Foo , freebsd-questions@FreeBSD.ORG Subject: Re: Reading MS Word files In-Reply-To: Your message of "Tue, 05 Oct 1999 11:04:42 EDT." From: bmah@CA.Sandia.GOV (Bruce A. Mah) Reply-To: bmah@CA.Sandia.GOV X-Face: g~c`.{#4q0"(V*b#g[i~rXgm*w;:nMfz%_RZLma)UgGN&=j`5vXoU^@n5v4:OO)c["!w)nD/!!~e4Sj7LiT'6*wZ83454H""lb{CC%T37O!!'S$S&D}sem7I[A 2V%N&+ X-Url: http://www.ca.sandia.gov/~bmah/ Mime-Version: 1.0 Content-Type: multipart/signed; boundary="==_Exmh_216585304P"; micalg=pgp-sha1; protocol="application/pgp-signature" Content-Transfer-Encoding: 7bit Date: Tue, 05 Oct 1999 08:13:32 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --==_Exmh_216585304P Content-Type: text/plain; charset=us-ascii If memory serves me right, "Christopher T. Griffiths" wrote: > Try setting up VNC. It was developed by ATT labs. Similar to pcanywhere > but much better and it runs on Unix. > > The linux version will run under emulation and you can control your WinX > desktop with it. Ummm, actually vnc runs quite well as a native FreeBSD application, without Linux emulation. It's part of the ports collection, in: /usr/ports/net/vnc Cheers, Bruce. --==_Exmh_216585304P Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 5.0i for non-commercial use MessageID: BviwNqxarxg9x4Fd0hioP5pR/CeFTdnn iQA/AwUBN/oVnNjKMXFboFLDEQLWnACgrPP9ufRu9MbJQjMawTZHfkM93TAAoMH0 C/ONm+K52HHAWKP5MtyQ+GSb =E34/ -----END PGP SIGNATURE----- --==_Exmh_216585304P-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:17:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id F2CD515634 for ; Tue, 5 Oct 1999 08:17:31 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id LAA16566; Tue, 5 Oct 1999 11:17:25 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Tue, 5 Oct 1999 11:17:25 -0400 (EDT) From: Brett Taylor To: imsleepy Cc: freebsd-questions@FreeBSD.ORG Subject: Re: pine error - pine starts readonly In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Mon, 4 Oct 1999, imsleepy wrote: > [Mailbox is open by another process, access is readonly] > > i get the above whenever i start pine as any use other than root, but > i know i dont have any other processes of pine running. This is, as I recall, a FAQ. Go check the pine FAQ (not sure of the webpage, but I think pine will take you there or at list it in one of the menu options' pages). I had this happening a long time ago and can't remember what the fix was, but I know I fixed it. :-) You can also probably search the freebsd-questions list. Brett ***************************************************** Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:18:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from viper.lovett.com (viper.lovett.com [216.60.121.173]) by hub.freebsd.org (Postfix) with ESMTP id 912B615611 for ; Tue, 5 Oct 1999 08:18:22 -0700 (PDT) (envelope-from ade@lovett.com) Received: from ade by viper.lovett.com with local (Exim 3.03 #1) id 11YWLv-000IIU-00; Tue, 05 Oct 1999 10:18:07 -0500 Date: Tue, 5 Oct 1999 10:18:07 -0500 From: Ade Lovett To: Gunnar Flygt Cc: FreeBSD Questions Subject: Re: GNOME: Does anyone use it? Message-ID: <19991005101807.R65863@remarq.com> References: <99100408410801.37693@fdho-w5.fdnet.com> <19991004162614.H65863@lovett.com> <19991005083001.A57727@sr.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991005083001.A57727@sr.se> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 08:30:01AM +0200, Gunnar Flygt wrote: > On Mon, Oct 04, 1999 at 04:26:14PM -0500, Ade Lovett wrote: > > > > This particular GNOME update is going to be even more messy (if that > > were possible :) than the last few, since glib/gtk+ have to be updated > > to 1.2.5 for gnome-core (and ports that depend on it) to work. > > > > Which means an awful lot of package deleting and recompiling/adding. > > It would be of very much help, if all this "package deleting and > recompiling/adding" was commented in some kind of README in the base > GNOME ports directorys. I've given up on trying to keep the thing going. Unfortunately, this varies for each update. It does highlight an intrinsic weakness in the ports/packages system with regards to dependency versioning; no-one as yet has come up with a suitably solid design to do this, particularly taking into account the differences between building-from-source and simply installing binary packages. All of the packaging systems out there (*BSD, RedHat, SuSE, Debian, Solaris, Irix, and others) have their own benefits and problems. Good suggestions (with patches! :) would be highly welcomed over on -ports For something as wide-ranging as a brand-new packaging subsystem, much thought is going to have to be expended before anything actually gets implemented (ie: it's not going to happen any time real soon now, as far as I can see). For now, probably the easiest approach for the huge metaports would be to use the devel/portcheckout port as a guide. * grab an up-to-date /usr/ports/INDEX file * install devel/portcheckout * type 'portcheckout gnome', save the output somewhere * manually go through each line of the output, checking your installed versions against the ones mentioned, updating as appropriate I _know_ this is still somewhat messy, and it doesn't give all the information, but it's a start, and far better than: rm -rf /var/db/pkg/* /usr/local/* /usr/X11R6/* and rebuilding everything from scratch. Regards, -aDe -- Ade Lovett, Austin, TX. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:32:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.wolves.k12.mo.us (mail.wolves.k12.mo.us [207.160.214.1]) by hub.freebsd.org (Postfix) with ESMTP id 9197E14EBD for ; Tue, 5 Oct 1999 08:32:10 -0700 (PDT) (envelope-from cdillon@wolves.k12.mo.us) Received: from mail.wolves.k12.mo.us (cdillon@mail.wolves.k12.mo.us [207.160.214.1]) by mail.wolves.k12.mo.us (8.9.3/8.9.2) with ESMTP id KAA38126; Tue, 5 Oct 1999 10:31:13 -0500 (CDT) (envelope-from cdillon@wolves.k12.mo.us) Date: Tue, 5 Oct 1999 10:31:13 -0500 (CDT) From: Chris Dillon To: "K. Gunderson" Cc: Scott Mitchell , freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? In-Reply-To: <19991004230916.A9527@mark.iacan.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, K. Gunderson wrote: > On Mon, Oct 04, 1999 at 04:43:48PM +0100, Scott Mitchell wrote: > > Having given in to my SO's nagging and decided to buy a new printer, my > > next task is to make sure it works with our favourite OS before handing > > over the cash... The printer in question will probably be from HP simply > > because I've never owned/used one that gave me any trouble, whereas the > > same cannot be said for certain others :-( Anyway, looking through the > > specs for the current crop of Deskjets, many of them apparently use > > something called 'Printing Performance Architecture' -- these also seem to > > be the models that don't even offer Mac support, so I assume the 'Printing > > Performance Architecture' is some kind of poxy WinPrinter thing that is > > best avoided. The rest of the range talks PCL Level 3 which I believe is > > fine for tools such as GhostScript et. al. > > > > Any confirmation that these are valid assumptions would be appreciated. > > Please cc: to me as I'm not subscribed to -questions these days. > > I have a Deskjet 660c that I bought several years back for a Windoze box > and based upon my experience with both it and HP, I will never buy another HP > product as long as I live. > > First off, the drivers for this puppy have > always been sketchy and HP was slow to offer a working WIn95 solution > resulting in frequent PITA's. There were also a couple warranty issues > that HP refused to honor. The printer came with a 3 year warranty. I > called HP to get it sent in for service and they refered me to some > outfit in San Diego, despite the fact that I can walk to their Boise > offices from here in 5 minutes. The San Diego outfit gave me the run > around, and after a bunch more effort with HP phone menus, I was told to > take it to the local CompUSA. So I drive it down there and they inform > me that the unit only has a 1 year warranty, despite me showing them the > side of the box where it clearly denoted 3. The CompUSA manager > calls HP to verify, and is informed that the unit only has a 1 year > warranty. Go figure. By this time I had no desire to spend a few more > hours trying to get a live human at HP and gave up. > > So hey, screw me once shame on you, but screw me twice shame on me. My > advice to anyone who asks is to stay away from HP since once they get > your money in hand it's the last service you'll ever get out of them. My experience, though not with their printer support division, is exactly the opposite. I bought a new HP ProCurve 4000M switch (which I am quite impressed with, by the way) that had a capacitor on the backplane blow up after a couple days of use. The unit still worked, but regardless I was going to have them replace it. I called the support number, was referred to one other number, and the people there were the best support crew I've ever talked to in a long time, and they were NICE. They offered no questions asked to send me a replacement unit (but requiring a CC or PO for collateral, of course, since I was getting the replacement before I shipped back the old unit). I got it the next day(!), and they even included an airbill in the box with the replacement so I didn't have to pay shipping to send the other one back. Now THAT is service. And for the price I paid for the switch, far below what anyone else is selling switches for that have these features, I'm entirely surprised I managed to get that kind of service. In comparison, I can pay outrageously inflated prices for other products, and have to wait on hold on a phone for an hour and get transferred 10 times to talk to some flippant tech support person that I'd like to reach across the phone and strangle. If it makes you feel any better, though, I've never been thoroughly impressed with HP's lower-end printers, either. But their mid- to high-end printers have never disappointed me. And if the box really did mention a 3-year warranty, but they claim it only has 1-year regardless of what the box said, just scream bloody legal action and I'm sure they'll instantly be much nicer and gladly send you a new printer. > -- > Ciao--Ken > http://www.y2know.org/safari > > Failure is not an option, it comes bundled with your Microsoft product. -- Chris Dillon - cdillon@wolves.k12.mo.us - cdillon@inter-linc.net FreeBSD: The fastest and most stable server OS on the planet. For Intel x86 and Alpha architectures (SPARC under development). ( http://www.freebsd.org ) "One should admire Windows users. It takes a great deal of courage to trust Windows with your data." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:32:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 6A29E14D10 for ; Tue, 5 Oct 1999 08:32:18 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YWYr-0004tz-00; Tue, 05 Oct 1999 17:31:29 +0200 From: Sheldon Hearn To: "Ian J. Brown" Cc: questions@FreeBSD.ORG Subject: Re: IPFilter Support?? In-reply-to: Your message of "Mon, 04 Oct 1999 15:57:48 -0400." <37F906BC.8F0769F4@on.bell.ca> Date: Tue, 05 Oct 1999 17:31:29 +0200 Message-ID: <18846.939137489@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 04 Oct 1999 15:57:48 -0400, "Ian J. Brown" wrote: > I've even gone to to the IPFilter main site (which states that FreeBSD > has IPfilter built in!?!) and downloaded the original version, but > everytime I try to modify my Kernel to include "options IPFILTER" it > crashes and burns... I'm running 3.2-Stable and I'm out of answers. You need to tell us what "it" and "crashes and burns" mean in "it crashes and burns". This probably entails cut'n'pasting (or copying out by hand if you're unlucky) the error messages you get and what you did to make the errors happen (exact commands). Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:34:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from donhm.calcasieu.com (tcnet04-14.austin.texas.net [209.99.40.203]) by hub.freebsd.org (Postfix) with ESMTP id 4739715024 for ; Tue, 5 Oct 1999 08:34:40 -0700 (PDT) (envelope-from dread@texas.net) Received: from donhm.calcasieu.com (localhost [127.0.0.1]) by donhm.calcasieu.com (8.9.3/8.9.3) with ESMTP id KAA22588; Tue, 5 Oct 1999 10:35:51 -0500 (CDT) (envelope-from dread@texas.net) Message-ID: X-Mailer: XFMail 1.3.1 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <002601bf0f0a$5c3d6400$7894a8c0@naviant.com> Date: Tue, 05 Oct 1999 10:35:50 -0500 (CDT) From: Don Read To: Lyndon Griffin Subject: RE: newsyslog question Cc: freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 05-Oct-99 Lyndon Griffin wrote: > What is the recommended way to control when newsyslog rotates files? What I > mean by this is I would like to rotate a particular log weekly, which is no > problem - I figured that much out, but I want the rotation to occur at 7pm, > for example. > > If it matters, the machine is configured for the timezone I am in... this is > a 3.3-RELEASE box. > I use different conf files for weekly and monthly rotations and in the /etc/crontab: 10 0 * * 0 root /usr/sbin/newsyslog -f /etc/newsyslog.w.conf 20 0 1 * * root /usr/sbin/newsyslog -f /etc/newsyslog.m.conf Regards, --- Don Read dread@calcasieu.com EDP Manager dread@texas.net Calcasieu Lumber Co. Austin TX -- the Y2K bug is not a problem. W2K however ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 8:55:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from merlin.rtpnc.epa.gov (merlin.rtpnc.epa.gov [134.67.208.148]) by hub.freebsd.org (Postfix) with ESMTP id C285C14FAD for ; Tue, 5 Oct 1999 08:55:18 -0700 (PDT) (envelope-from Jenkins.Mike@epamail.epa.gov) Received: from myrtle.rtpnc.epa.gov by epamail.epa.gov (PMDF V5.1-12 #26439) with ESMTP id <0FJ4007EVXMN17@epamail.epa.gov> for questions@freebsd.org; Tue, 5 Oct 1999 10:59:30 -0400 (EDT) Received: from EPAHUB2.RTP.EPA.GOV by epamail.epa.gov (PMDF V5.1-12 #26438) with SMTP id <0FJ4008R4XNC4U@epamail.epa.gov> for questions@freebsd.org; Tue, 05 Oct 1999 10:59:37 -0400 (EDT) Received: by EPAHUB2.RTP.EPA.GOV(Lotus SMTP MTA v4.6.3 hotfix 1 (767.1 12-15-1998)) id 85256801.0051E70D ; Tue, 05 Oct 1999 10:54:35 -0400 Date: Tue, 05 Oct 1999 09:59:33 -0500 From: Jenkins.Mike@epamail.epa.gov Subject: ipfw and ports > 1023? To: questions@freebsd.org Message-id: <85256801.0051E276.00@EPAHUB2.RTP.EPA.GOV> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline X-Lotus-FromDomain: EPA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG How do you say "ports > 1023" in ipfw? I see the port-port syntax but that is for a limited range of ports. Thanks, Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9: 0:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 45790150B0 for ; Tue, 5 Oct 1999 09:00:39 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id KAA89149; Tue, 5 Oct 1999 10:58:27 -0500 (CDT) (envelope-from dan) Date: Tue, 5 Oct 1999 10:58:27 -0500 From: Dan Nelson To: Jenkins.Mike@epamail.epa.gov Cc: questions@FreeBSD.ORG Subject: Re: ipfw and ports > 1023? Message-ID: <19991005105827.B88301@dan.emsphone.com> References: <85256801.0051E276.00@EPAHUB2.RTP.EPA.GOV> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <85256801.0051E276.00@EPAHUB2.RTP.EPA.GOV> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 05), Jenkins.Mike@epamail.epa.gov said: > > > How do you say "ports > 1023" in ipfw? > I see the port-port syntax but that is for a limited range of ports. port 1024-65535 -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9: 0:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id 8360614FAD for ; Tue, 5 Oct 1999 09:00:35 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id UAA11899; Tue, 5 Oct 1999 20:54:20 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id VAA01003; Tue, 5 Oct 1999 21:39:19 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id IAA00376; Tue, 5 Oct 1999 08:06:11 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Tue, 5 Oct 1999 08:06:08 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Marc Schneiders Cc: Kent Stewart , Oleg Ogurok , Greg Lehey , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Mon, 4 Oct 1999, Marc Schneiders wrote: > > I have a spare system, which is exactly Intel 386DX-33 (overclocked to > > 40MHz) with 4Mb of RAM. I'd happy to built a system which will work > > 24-hours only as E-mail/new/FIDO gateway. Perfomance _is_ acceptable. I > > have a 28.8K modem for dialing out. My experience proves that 386DX-40 > > can handle 4 x 115200 NUL-modems + 10Mb Ethernet (well, it was Linux > > RH-5.0 boxen running as IPX <-> IP <-> IPX gateway). > > > > I think that my 386 boxen will stay without any use ... > > Anybody knows, is it possible to install NetBSD/OpenBSD on 4Mb of RAM ?! > > > [...] > > It isn't possible :-( Our only relief is 2.1.7.1. That works and installs > ok on 4 MB. so, 2.1.7.1 is the greatest one. where can I download it ? if it is not supported anymore, why ? > > Marc > -- > Marc Schneiders > > marc@venster.nl > marc@oldserver.demon.nl > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/ldEuRxlWKN2EXhAQGk9AL/XLjl4wfz0L7qzSb4IGtmXWxm5uePPr/b 1/Wbo3lRK5Tv4ruEgv569Hcb8qjQ3IltEvW/9COq6EDKmi1jo0+rV76SUWa1uz45 GxX6Qk2QtFfWzVqafb/Oou/gVa3VSQUi =Ut5i -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9: 4:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id 2B6A5156ED for ; Tue, 5 Oct 1999 09:03:07 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id TAA63578; Tue, 5 Oct 1999 19:01:27 +0300 (EEST) (envelope-from ru) Date: Tue, 5 Oct 1999 19:01:27 +0300 From: Ruslan Ermilov To: Jenkins.Mike@epamail.epa.gov Cc: questions@FreeBSD.ORG Subject: Re: ipfw and ports > 1023? Message-ID: <19991005190127.D8085@relay.ucb.crimea.ua> Mail-Followup-To: Jenkins.Mike@epamail.epa.gov, questions@FreeBSD.ORG References: <85256801.0051E276.00@EPAHUB2.RTP.EPA.GOV> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <85256801.0051E276.00@EPAHUB2.RTP.EPA.GOV>; from Jenkins.Mike@epamail.epa.gov on Tue, Oct 05, 1999 at 09:59:33AM -0500 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 09:59:33AM -0500, Jenkins.Mike@epamail.epa.gov wrote: > > > How do you say "ports > 1023" in ipfw? > I see the port-port syntax but that is for a limited range of ports. > ipfw(8) manpage, in particular, says: : With the TCP and UDP protocols, optional ports may be specified as: : : {port|port-port}[,port[,...]] : : Service names (from /etc/services) may be used instead of numeric port : values. A range may only be specified as the first value, and the length ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ : of the port list is limited to IP_FW_MAX_PORTS (as defined in : /usr/src/sys/netinet/ip_fw.h) ports. A `\' can be used to escape the `-' : character in a service name: So, we say "1024-". Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9: 8:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Mail.austin.rr.com (sm2.texas.rr.com [24.93.35.55]) by hub.freebsd.org (Postfix) with ESMTP id 43CBD152FA for ; Tue, 5 Oct 1999 09:08:46 -0700 (PDT) (envelope-from rluedtke@freewwweb.com) Received: from [24.28.89.178] ([24.28.89.178]) by Mail.austin.rr.com with Microsoft SMTPSVC(5.5.1875.185.18); Tue, 5 Oct 1999 11:01:57 -0500 X-Mailer: Microsoft Outlook Express Macintosh Edition - 4.5 (0410) Date: Tue, 05 Oct 1999 11:08:07 -0500 Subject: install over networked computers From: "Robert M. Luedtke" To: freeBSD-questions@freebsd.org Mime-version: 1.0 X-Priority: 3 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Message-ID: <0720357011605a9SM2@Mail.austin.rr.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a FreeBSD 2.2.8 system running on a Pentium II Compaq Presario with a DVD-ROM drive. I have an old AST machine (Pentium 100MHz) without a CD-ROM drive. They both have ethernet cards. I can network them together and pinging shows that they are communicating with each other. I looked in the installation FAQs looking for a way to install FreeBSD on the AST machine over this intranet using the DVD-ROM drive of the Compaq for the installation CD. I couldn't find anything. This is probably well covered somewhere in the docs and I'm just over looking it. Any help, suggestions, guidance, etc. would we very appreciated. Robert To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9: 9: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from templar.fgi.net (templar.fgi.net [209.248.1.40]) by hub.freebsd.org (Postfix) with ESMTP id 46F4B15601 for ; Tue, 5 Oct 1999 09:08:59 -0700 (PDT) (envelope-from darnold@fgi.net) Received: from darnold.fgi.net (MaxTNT1-174.spfld.fgi.net [204.212.198.174]) by templar.fgi.net (8.9.0/8.9.1) with SMTP id LAA26685; Tue, 5 Oct 1999 11:08:38 -0500 (CDT) From: Dick Arnold To: "Ian J. Brown" Subject: Re: IPFilter Support?? Date: Tue, 5 Oct 1999 11:05:49 -0500 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain Cc: questions@FreeBSD.ORG References: <18846.939137489@axl.noc.iafrica.com> In-Reply-To: <18846.939137489@axl.noc.iafrica.com> MIME-Version: 1.0 Message-Id: <99100511080800.00294@darnold.fgi.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 05 Oct 1999, Sheldon Hearn wrote: > On Mon, 04 Oct 1999 15:57:48 -0400, "Ian J. Brown" wrote: > > > I've even gone to to the IPFilter main site (which states that FreeBSD > > has IPfilter built in!?!) and downloaded the original version, but > > everytime I try to modify my Kernel to include "options IPFILTER" it > > crashes and burns... I'm running 3.2-Stable and I'm out of answers. > > You need to tell us what "it" and "crashes and burns" mean in "it > crashes and burns". This probably entails cut'n'pasting (or copying out > by hand if you're unlucky) the error messages you get and what you did > to make the errors happen (exact commands). > > Ciao, > Sheldon. > Are the /usr/src/contrib/ipfilter sources installed on your machine? Dick A. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9: 9:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mark.iacan.org (mark.iacan.org [208.1.106.133]) by hub.freebsd.org (Postfix) with ESMTP id 5111A1508A for ; Tue, 5 Oct 1999 09:09:24 -0700 (PDT) (envelope-from kgun@mark.iacan.org) Received: (from kgun@localhost) by mark.iacan.org (8.9.3/8.9.3) id KAA10581; Tue, 5 Oct 1999 10:09:07 -0600 (MDT) (envelope-from kgun) Date: Tue, 5 Oct 1999 10:09:07 -0600 From: "K. Gunderson" To: Chris Dillon Cc: "K. Gunderson" , Scott Mitchell , freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? Message-ID: <19991005100907.A10533@mark.iacan.org> References: <19991004230916.A9527@mark.iacan.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: ; from Chris Dillon on Tue, Oct 05, 1999 at 10:31:13AM -0500 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > If it makes you feel any better, though, I've never been thoroughly > impressed with HP's lower-end printers, either. But their mid- to > high-end printers have never disappointed me. And if the box really > did mention a 3-year warranty, but they claim it only has 1-year > regardless of what the box said, just scream bloody legal action and > I'm sure they'll instantly be much nicer and gladly send you a new > printer. I don't want to beat this to death here, but only wish to mention that at the time I purchased this pinter it was HP's top end color inkjet and set me back $550. I'm glad you had better luck than I, but suggest your experience may be atypical. Just ask anyone who has had the unfortunate experience of owning a Pavillion and tried to get tech support for the LT Winmodems. Took them about 4-5 mos. to get drivers that would work with ISP's using USR/3Com products. For a while there the unofficial HP position was to switch to an ISP that used Rockwell chipsets. -- Ciao--Ken http://www.y2know.org/safari Failure is not an option, it comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:10:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id 7C71F1508A for ; Tue, 5 Oct 1999 09:10:18 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id JAA73635; Tue, 5 Oct 1999 09:09:45 -0700 (PDT) Message-ID: <37FA22C4.8CBE8C33@owp.csus.edu> Date: Tue, 05 Oct 1999 16:09:40 +0000 From: Joseph Scott X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: Marko Vidberg Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Trying to install php... problems References: <02ed01bf0ee8$401235c0$eaca7018@cambr1.on.wave.home.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Marko Vidberg wrote: > > I am trying to install php2 (yes, the old version) onto a new Freebsd > release and am having some compilation problems. > > I am getting the error: > > db.c: In function "ListSupportDBs" > db.c: 55: 'gdbm_version' undeclared > *** Error code 1 > > Now, my question is... what is gdbm and what should I do to resolve this > problem? > Thanks for any help. From the description in the ports collection : GNU `dbm' is a library of functions implementing a hashed database on a disk file. The software was written by Philip A. Nelson. You can install it from the ports collection ( cd /usr/ports/databases/gdbm; make install ). -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:27:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id B696015602 for ; Tue, 5 Oct 1999 09:27:26 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YXPg-0007og-00; Tue, 5 Oct 1999 17:26:04 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id RAA21984 for ; Tue, 5 Oct 1999 17:26:03 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 17:26:03 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: ISP connections dropped Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Just an update on my problem: tech support for my ISP told me to disable X2 on my modem. I finally founf out how to do that, but i still keep getting disconnected. Any ideas? This doesn't happen with windows and it didn't happen with linux... And the windows modem options did not disable X2 either. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:29:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [194.242.128.25]) by hub.freebsd.org (Postfix) with ESMTP id BCABF14DB7 for ; Tue, 5 Oct 1999 09:29:32 -0700 (PDT) (envelope-from joe@florence.pavilion.net) Received: (from joe@localhost) by florence.pavilion.net (8.9.3/8.8.8) id RAA30119; Tue, 5 Oct 1999 17:29:07 +0100 (BST) (envelope-from joe) Date: Tue, 5 Oct 1999 17:29:07 +0100 From: Josef Karthauser To: "K. Gunderson" Cc: Chris Dillon , Scott Mitchell , freebsd-questions@FreeBSD.ORG, freebsd-users@uk.freebsd.org Subject: Re: HP printers & FreeBSD? Message-ID: <19991005172906.A24928@florence.pavilion.net> References: <19991004230916.A9527@mark.iacan.org> <19991005100907.A10533@mark.iacan.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991005100907.A10533@mark.iacan.org> X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, 24 The Old Steine, Brighton, BN1 1EL, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 10:09:07AM -0600, K. Gunderson wrote: > > I'm glad you had better luck than I, but suggest > your experience may be atypical. Just ask anyone who has had the > unfortunate experience of owning a Pavillion and tried to get tech ^^^^^^^^^ That's Pavillion the HP computer, not Pavilion the ISP :) Joe -- Josef Karthauser FreeBSD: How many times have you booted today? Technical Manager Viagra for your server (http://www.uk.freebsd.org) Pavilion Internet plc. [joe@pavilion.net, joe@uk.freebsd.org, joe@tao.org.uk] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:42:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from orion.ac.hmc.edu (Orion.AC.HMC.Edu [134.173.32.20]) by hub.freebsd.org (Postfix) with ESMTP id 7D43D14EC8 for ; Tue, 5 Oct 1999 09:42:44 -0700 (PDT) (envelope-from brooks@one-eyed-alien.net) Received: from localhost (brdavis@localhost) by orion.ac.hmc.edu (8.8.8/8.8.8) with ESMTP id JAA11762; Tue, 5 Oct 1999 09:41:03 -0700 (PDT) X-Authentication-Warning: orion.ac.hmc.edu: brdavis owned process doing -bs Date: Tue, 5 Oct 1999 09:41:03 -0700 (PDT) From: Brooks Davis X-Sender: brdavis@orion.ac.hmc.edu To: stech4@mindspring.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: e-mail server In-Reply-To: <000801bf0ec0$b06e6dc0$81cc56d1@t6r1h9> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999 stech4@mindspring.com wrote: > What e-mail servers does freeBSD has and which one is good? Sendmail comes installed and is the mail transport agent (MTA) which handles more of the Internet's mail. The ports collection also includes qmail, postfix, and exim among others. The qmail program is popular because it was written from the ground up with security in mind. Postfix is newer and has similar design goals to qmail except that it was designed with the idea of looking like sendmail from a user perspective. Posifix is used to power the FreeBSD.org mail server. I don't really know anything about exim, but some people swear by it. -- Brooks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:49:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail3.cadvision.com (mail3.cadvision.com [207.228.64.48]) by hub.freebsd.org (Postfix) with ESMTP id 385EA14DCF for ; Tue, 5 Oct 1999 09:49:33 -0700 (PDT) (envelope-from dkwiebe@mail.cadvision.com) Received: from mail.cadvision.com (ppp5.heartland.ab.ca [207.107.228.133]) by mail3.cadvision.com (8.9.3/8.9.1/CW) with ESMTP id KAA31470; Tue, 5 Oct 1999 10:46:02 -0600 Message-ID: <37FA2CAD.1FE3184E@mail.cadvision.com> Date: Tue, 05 Oct 1999 10:51:57 -0600 From: Darren WIebe Reply-To: dkwiebe@hagenhomes.com Organization: Hagen Homes Ltd. X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 3.3-RC i386) X-Accept-Language: en MIME-Version: 1.0 To: itetcu@go.ro Cc: questions@FreeBSD.ORG Subject: Re: FreeBSD-Server, Win98-Client References: <19991004211021.7A02A14CD0@hub.freebsd.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Questions: > 1. Is all the hardware supported ? Do i have to rebuild the kernel for > processors (and how) ? I'm afraid I don't know... > 2. Can you point me to some good (for a beginner) Samba > resources? Have you looked at www.samba.org?? > 3. We will have a dial-up connection to the ISP, and I want the > server to be able to dial when someone on the win98 boxes want to > connect. ppp -alias -demand isp, will work for that, look in the handbook. > 4. Depends on the user of the win98 boxes, the connection > will/won`t be done or it will be done between, let`s say 23h and 7 h . ?? > 5. The server will check the ISP for new mail every 2 h. /usr/ports/fetchmail - I use this, it works very well. > 6. How can i record the IP addresses that the users acces from the > win98 boxes ? We want to see if he`s gest playing around on the > net or he is also doing some work. > 7. Tell me about your favorite (free) HTML editor under FreeBSD. > Untill now I`ve worked with Netscape, HomeSite, HotMetalPro and > Notepad for the web design and i would like to swich under > FreeBSD for the web design work. Netscape runs under FreeBSD with linux compatability installed. > > Merci for the answers, wish you the best, > Ionut > > Ion Mihai Tetcu > itetcu@go.ro Hope this helps Darren Wiebe dkwiebe@hagenhomes.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:56:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id D8EFE152E7 for ; Tue, 5 Oct 1999 09:56:27 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id VAA13288; Tue, 5 Oct 1999 21:54:10 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id WAA01114; Tue, 5 Oct 1999 22:03:56 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id VAA02094; Tue, 5 Oct 1999 21:50:05 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Tue, 5 Oct 1999 21:50:02 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: kostia@obninsk.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: your mail In-Reply-To: <000801bf0f20$7f37d9c0$0a0a0a0a@kostya> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Tue, 5 Oct 1999 kostia@obninsk.com wrote: > I have computer on which there is Freebsd it works as router > How can I prorate Internet traffic between several users ? maybe the latest squid ? or SOCKS ? > > e-mail: kostia@obninsk.com > e-mail: kostya@obninsk.net > > icq 17067364 > Programing | Linux Admin | Unix Admin > www.obninsk.net > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/oeLORxlWKN2EXhAQFXmQMA3BuZ2NfmaDpy2SPK7plwFWWqCZsZR5yP AI1MwaK5by40Njw6ZTZ4xiDIRLFXd9ScE4GEtReVXjnbF4J10h8DaDuZpAs11l8s q7zRi55ZA8/MU1OpcavAqLQmlIr83JkW =nTMM -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 9:57:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id E965E155DC for ; Tue, 5 Oct 1999 09:57:07 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id VAA13287; Tue, 5 Oct 1999 21:54:10 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id WAA01110; Tue, 5 Oct 1999 22:03:56 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id VAA02083; Tue, 5 Oct 1999 21:46:20 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Tue, 5 Oct 1999 21:46:16 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Alex Bulygin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How to check CD image? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Tue, 5 Oct 1999, Alex Bulygin wrote: > > Hi folks! > > In the man page for Cdrecord there are some lines about how to check > CD image on Solaris and Linux. However no any hints > about FreeBSD. Or I misunderstand something? There are number of ways to do it. Here's the simpliest one (from my point of view) .... 1. I suppose that you have "super.iso" as an image. 2. # vnconfig /dev/vn0c super.iso 3. wait ! you must have vn - pseudo device compiled into your kernel. (vn device allows you to turn regular files into special block device files, similar to "-o" option of Linux-mount) 4. make sure you have /dev/vn0c, if not .. # cd /dev # ./MAKEDEV vn0c 5. choose some spare folder (say /mnt1) and mount your image there: # mount -t cd9660 /dev/vn0c /mnt1 6. now you have that image (super.iso) mounted at /mnt1 7. build checksums for CD-image: # cd /mnt1 # find ./ -name "*" -exec md5 '{}' ';' >> /home//cd-image.md5 8. build checksums for original CD (say, it's mounted at /cdrom) # cd /cdrom # find ./ -name "*" -exec md5 '{}' ';' >> /home//cd.md5 9. finally !!! # cd /home/ # diff cd-image.md5 cd.md5 10. that's it > > CD writer Yamaha4416CW, FreeBSD 3.3.2-stable, cdrecord and mkisofs from > packages. > > Thanks for any idea. > > TIA, Alex. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Regards, Ilia Chipitsine -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/odS+RxlWKN2EXhAQH+bgMAuHIummXjXGhaeVTwUKOKSHxhmnTLGrg+ rde4Hz5XS4CfrSWUDKxoJ3r8J/vuf/mMrpytkvOy0Ge0987Vjsf+My43Q53xTkLe FRD4KYqy9l14cjK0AAUdljllgfBCYWbs =PD4x -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10: 6:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from j51.com (j51.com [209.94.121.51]) by hub.freebsd.org (Postfix) with ESMTP id EFAF414C29 for ; Tue, 5 Oct 1999 10:06:00 -0700 (PDT) (envelope-from drew@j51.com) Received: (from drew@localhost) by j51.com (8.8.8/8.8.5) id NAA28277 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 13:03:32 -0400 (EDT) From: Drew C Morone Message-Id: <199910051703.NAA28277@j51.com> Subject: syslogd questions To: freebsd-questions@freebsd.org Date: Tue, 5 Oct 1999 13:03:32 -0400 (EDT) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG What can I do to get ipfw from logging to /var/log/messages? I have added !ipfw *.* /var/log/ipfw but now it logs to both files. Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:10:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 8ACD515655 for ; Tue, 5 Oct 1999 10:10:12 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA18496; Tue, 5 Oct 1999 10:28:13 -0700 (PDT) Date: Tue, 5 Oct 1999 10:28:12 -0700 (PDT) From: Alfred Perlstein To: David Cook Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Multiple Default Routes !!! In-Reply-To: <19991004233259.13775.qmail@hotmail.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, David Cook wrote: > I'm really hoping that some kind soul will have a look at this > problem for me ... I've posted this twice now with absolutely > ** zero ** response. > > Anyway ... third time lucky ... removing the '1' from the end of your route add command makes it look like it works. route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 _not_ route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 1 I assume the '1' is from your sysV experiance meaning metric, that's not how BSD does it afaik. -Alfred > > > I'm having a problem with the route command in FreeBSD 3.1: > > I have multiple branches connected to our Head Office via TCP/IP using the > private IP Class C ranges 192.168.X. as follows: > > IP Range: Branch: Router: > > 192.168.1 Head Office 192.168.1.15 > 192.168.2 Branch2 192.168.2.15 > . > . > 192.168.26 Branch26 192.168.26.15 > > I have added a freeBSD box to Branch26 to act as a file & print server to > Windows clients via Samba. It was originally set up with a default route > of 192.168.26.15 which is the router that connects the branch to Head > Office. > > So far so good ... I can telnet into this machine from any other subnet > including my home subnet of 192.168.77, which connects to Head Office > via ppp. > > I now need to use the freebsd box to provide internet access to Branch26 > only > (other branches will gain access to the 'net via Head Office ... don't ask, > it's political) which means I need a *static* non-default route for > 192.168.0.0 via the 192.168.26.15 router, and a default route for all other > traffic via the dynamic PPP link on the freebsd box. I am having trouble > with the static route, even before trying to set up ppp. > > Here's what I tried ... > > > bash-2.02# uname -a > FreeBSD b26bsd.ahca.com.au 3.1-RELEASE FreeBSD 3.1-RELEASE #0: Mon Feb 15 > 11:08: > 08 GMT 1999 jkh@usw3.freebsd.org:/usr/src/sys/compile/GENERIC i386 > > bash-2.02# netstat -rn > Routing tables > > Internet: > Destination Gateway Flags Refs Use Netif > Expire > default 192.168.26.15 UGSc 3 1 ed1 > 127.0.0.1 127.0.0.1 UH 0 2 lo0 > 192.168.26 link#1 UC 0 0 ed1 > 192.168.26.15 0:90:27:72:a4:ba UHLW 3 0 ed1 1177 > 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 > > bash-2.02# route add -net 192.168 -netmask 255.255.0.0 192.168.26.15 1 > add net 192.168: gateway 192.168.26.15 > > bash-2.02# netstat -rn > Routing tables > > Internet: > Destination Gateway Flags Refs Use Netif > Expire > default 192.168.26.15 UGSc 1 0 ed1 => > default 192.168.26.15 UGSc 3 1 ed1 > 127.0.0.1 127.0.0.1 UH 0 2 lo0 > 192.168.26 link#1 UC 0 0 ed1 > 192.168.26.15 0:90:27:72:a4:ba UHLW 4 0 ed1 1058 > 192.168.26.255 ff:ff:ff:ff:ff:ff UHLWb 3 293 ed1 > > > I get *two* default routes!!! I cannot seem to delete the original > without a "route flush", which kills my telnet session from home, and > leaves no default route at all. > > (I telnet into the router at Branch26, and then from the router > to the freebsd box to fix the routing table, if you are wondering) > > I've tried a number of other combinations, with and without the -netmask > parameter, all with the dual default result. I have done this before with > both SCO OpenServer & Linux, so I believe my theory is correct ... obviously > I am missing something simple. > > > TIA > > > David Cook > Information Services Manager > Latrobe Health Services > 32 McDonald Street > Morwell Victoria 3840 > Australia > email:dacster69@hotmail.com > > > ______________________________________________________ > Get Your Private, Free Email at http://www.hotmail.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:16:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id EF8DA150EA for ; Tue, 5 Oct 1999 10:16:55 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA18615; Tue, 5 Oct 1999 10:34:31 -0700 (PDT) Date: Tue, 5 Oct 1999 10:34:31 -0700 (PDT) From: Alfred Perlstein To: "Robert M. Luedtke" Cc: freeBSD-questions@FreeBSD.ORG Subject: Re: install over networked computers In-Reply-To: <0720357011605a9SM2@Mail.austin.rr.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Robert M. Luedtke wrote: > I have a FreeBSD 2.2.8 system running on a Pentium II Compaq Presario with a > DVD-ROM drive. I have an old AST machine (Pentium 100MHz) without a CD-ROM > drive. They both have ethernet cards. I can network them together and > pinging shows that they are communicating with each other. I looked in the > installation FAQs looking for a way to install FreeBSD on the AST machine > over this intranet using the DVD-ROM drive of the Compaq for the > installation CD. I couldn't find anything. This is probably well covered > somewhere in the docs and I'm just over looking it. Any help, suggestions, > guidance, etc. would we very appreciated. Export the cdrom via NFS and install over nfs, or provide ftp access to the mounted cdrom and do an ftp instal via specific URL. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:19:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 35F8B155EF for ; Tue, 5 Oct 1999 10:19:11 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA18717; Tue, 5 Oct 1999 10:37:13 -0700 (PDT) Date: Tue, 5 Oct 1999 10:37:13 -0700 (PDT) From: Alfred Perlstein To: stech4@mindspring.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: e-mail server In-Reply-To: <000801bf0ec0$b06e6dc0$81cc56d1@t6r1h9> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999 stech4@mindspring.com wrote: > What e-mail servers does freeBSD has and which one is good? FreeBSD comes bundled with 'sendmail' (www.sendmail.org) it's pretty useful and flexible, however the ports collection (http://www.freebsd.org/ports) contains at least 3 other email servers. I'm not sure exactly which to recommend, I find sendmail to be quite flexible, but I'll be checking out postfix after it's gotten more time in the hot seat. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:24:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 9B3CF15606 for ; Tue, 5 Oct 1999 10:24:28 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA18832; Tue, 5 Oct 1999 10:42:10 -0700 (PDT) Date: Tue, 5 Oct 1999 10:42:10 -0700 (PDT) From: Alfred Perlstein To: x@asdf.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: recursive cat weirdness In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999 x@asdf.com wrote: > Hello! > > A co-worker found something interesting today by accident. He tried it on > a FreeBSD 1.2.6 machine, and i just tried it on my 3.3 machine. > > You make two files that can have as many lines as you want. Just one line > of garbage will do. Then you > > cat file1 file2 > file2 > > it just hangs and starts eating CPU. Then after you Ctrl C out and check, > the file2 has gotten huge (well, at least if you let it run long enough). Yup, this is standard unix behavior, another fun gotcha is this: Using 'cat' on the script output file while in the middle of creating that script, yes I saw a student sit slack jawed in the lab as his terminal's screen scrolled on endlessly. me: "What did you do?" student: "Nothing" "Oh really..." (reaches for cluebat) *wham* "Ow, whatcha do that for?" "do what?" > I tried this on a version of Linux and it wouldn't let me by saying > something like "output file is input file". That's pretty odd, I'd like to know where that error checking was hacked in. > I guess this is not a big deal but if someone wanted to be a jerk they > could just make two little files and eat up your disk space and CPU until > you noticed it running. Yup, and then you can delete thier account unless they provide for a good reason for doing so. (hint: quotas) -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:24:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 4086015606 for ; Tue, 5 Oct 1999 10:24:34 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA18839; Tue, 5 Oct 1999 10:42:40 -0700 (PDT) Date: Tue, 5 Oct 1999 10:42:40 -0700 (PDT) From: Alfred Perlstein To: kostia@obninsk.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: your mail In-Reply-To: <000801bf0f20$7f37d9c0$0a0a0a0a@kostya> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999 kostia@obninsk.com wrote: > I have computer on which there is Freebsd it works as router > How can I prorate Internet traffic between several users ? Turn on routing. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:35: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id 13FA91562C for ; Tue, 5 Oct 1999 10:34:08 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id NAA17557; Tue, 5 Oct 1999 13:31:20 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Tue, 5 Oct 1999 13:31:20 -0400 (EDT) From: Brett Taylor To: dkwiebe@hagenhomes.com Cc: itetcu@go.ro, questions@FreeBSD.ORG Subject: Re: FreeBSD-Server, Win98-Client In-Reply-To: <37FA2CAD.1FE3184E@mail.cadvision.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Tue, 5 Oct 1999, Darren WIebe wrote: > > 7. Tell me about your favorite (free) HTML editor under FreeBSD. > > Untill now I`ve worked with Netscape, HomeSite, HotMetalPro and > > Notepad for the web design and i would like to swich under > > FreeBSD for the web design work. > > Netscape runs under FreeBSD with linux compatability installed. Netscape runs natively too - look in the ports collection; 4.7 just got committed. In terms of other HTML editors there are a number out there - you can try asWedit (in ports - www/aswedit), ashe (also in ports), Coffee (not in the ports at present) and lots of others. Of course vi always works. :-) Brett ***************************************************** Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:35:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from eachan.tir.com (eachan.tir.com [216.40.128.71]) by hub.freebsd.org (Postfix) with ESMTP id CEEDC15634 for ; Tue, 5 Oct 1999 10:34:16 -0700 (PDT) (envelope-from username@tir.com) Received: from jason (port11.mico07.tir.com [216.40.137.58]) by eachan.tir.com (8.9.1/8.9.1) with SMTP id NAA25753 for ; Tue, 5 Oct 1999 13:32:24 -0400 (EDT) Message-ID: <002b01bf0f57$93ce3780$040aa8c0@jason> From: "Jason" To: Subject: Zip Drive(s) Date: Tue, 5 Oct 1999 13:32:20 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have STFW and after following the information found still have not resolved my problem. I have an internal 100 MB IDE Iomega zip drive. I have a zip disk in the drive when FreeBSD boots but I still can't seem to be able to mount the drive. Here is what the /var/run/dmesg.boot file says: wdc1: unit 1 atapi , removable, intr, inordis wfd0: medium type unknown (nodisk) wfd0: buggy Zip drive, 64-block transfer limit set Also, the zip drive works fine in Windows 98. Thanks in advance... -Jason To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:46:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bsd01.community.net.uk (bsd01.community.net.uk [195.72.164.132]) by hub.freebsd.org (Postfix) with ESMTP id 69FA215649 for ; Tue, 5 Oct 1999 10:46:10 -0700 (PDT) (envelope-from rpb@community.net.uk) Received: from rpb (delta.office.community.net.uk [195.72.161.144]) by bsd01.community.net.uk (8.9.3/8.9.3) with SMTP id SAA02658; Tue, 5 Oct 1999 18:46:08 +0100 (BST) From: "Ray Bellis" To: Cc: Subject: Crashes with WANic 405 and FreeBSD 3.3 Date: Tue, 5 Oct 1999 18:46:08 +0100 Message-ID: <000001bf0f59$8168d3a0$90a148c3@office.community.net.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've been trying to upgrade a system with a WANic 405 card to FreeBSD 3.3-RELEASE and whenever the sr0 device is ifconfig'ed up the system completely freezes a couple of seconds later. The sr(4) driver seems almost untouched compared to the 2.2.8-stable version, could there be a major bug in sppp(4) or similar that's causing this? regards, Ray. -- Ray Bellis, MA(Oxon) - Technical Director - community internet plc Windsor House, 12 High Street, Kidlington, Oxford, OX5 2PJ tel: +44 1865 856000 email: ray.bellis@community.net.uk fax: +44 1865 856001 web: http://www.community.net.uk/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 10:57:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 91746151FA for ; Tue, 5 Oct 1999 10:57:10 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YYpT-0005dn-00; Tue, 05 Oct 1999 19:56:47 +0200 From: Sheldon Hearn To: "Lyndon Griffin" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: newsyslog question In-reply-to: Your message of "Tue, 05 Oct 1999 01:19:36 MST." <002601bf0f0a$5c3d6400$7894a8c0@naviant.com> Date: Tue, 05 Oct 1999 19:56:47 +0200 Message-ID: <21686.939146207@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 05 Oct 1999 01:19:36 MST, "Lyndon Griffin" wrote: > What is the recommended way to control when newsyslog rotates files? = > What I mean by this is I would like to rotate a particular log weekly, = > which is no problem - I figured that much out, but I want the rotation = > to occur at 7pm, for example. Hi Lyndon, Here's how the newsyslog(8) manpage describes the when field in newsyslog.conf: when The when field can consist of an interval, a specific time, or both. If the when field is an asterisk (`*') log rotation will depend only on the contents of the size field. Otherwise, the when field consists of an optional interval in hours, optionally followed by an `@'-sign and a time in a restricted ISO 8601 for- mat. If a time is specified, the log file will only be trimmed if newsyslog is run within one hour of the specified time. If an interval is specified, the log file will be trimmed if that many hours have passed since the last rotation. When both a time and an interval are specified, both conditions must be satisfied for the rotation to take place. The manpage then goes on to descibe the time format. Hope that helps. :-) Later, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:10: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from inethost.cairn.org (inethost.cairn.org [165.254.126.3]) by hub.freebsd.org (Postfix) with ESMTP id 92C1414D1C for ; Tue, 5 Oct 1999 11:10:02 -0700 (PDT) (envelope-from drew@j51.com) Received: from drew (drew.cairn.org [165.254.126.15]) by inethost.cairn.org (8.8.8/8.8.8) with SMTP id OAA27968 for ; Tue, 5 Oct 1999 14:09:39 -0400 (EDT) Message-Id: <2.2.32.19991005181224.00fae5a0@inethost.cairn.org> X-Sender: tdrew@inethost.cairn.org X-Mailer: Windows Eudora Pro Version 2.2 (32) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Tue, 05 Oct 1999 14:12:24 -0400 To: freebsd-questions@freebsd.org From: Drew Morone Subject: compiling apache-ssl on 3.3 Release Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm trying to compile the apache-ssl port and get the following error: cc -c -I../../os/unix -I../../include -I/usr/local/include -funsigned-char -DTARGET=\"httpsd\" -DAPACHE_SSL -O -pipe -I/usr/local/include/openssl `../../apaci` apache_ssl.c apache_ssl.c: In function `GetPrivateKey': apache_ssl.c:1162: too few arguments to function `PEM_read_RSAPrivateKey' apache_ssl.c: In function `GetCertificateAndKey': apache_ssl.c:1268: too few arguments to function `PEM_read_X509' *** Error code 1 Stop. *** Error code 1 Any clues why? Drew To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:16:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zibbi.mikom.csir.co.za (zibbi.mikom.csir.co.za [146.64.24.58]) by hub.freebsd.org (Postfix) with ESMTP id 169421504A for ; Tue, 5 Oct 1999 11:16:48 -0700 (PDT) (envelope-from jhay@zibbi.mikom.csir.co.za) Received: (from jhay@localhost) by zibbi.mikom.csir.co.za (8.9.3/8.9.3) id UAA92587; Tue, 5 Oct 1999 20:16:19 +0200 (SAT) (envelope-from jhay) From: John Hay Message-Id: <199910051816.UAA92587@zibbi.mikom.csir.co.za> Subject: Re: Crashes with WANic 405 and FreeBSD 3.3 In-Reply-To: <000001bf0f59$8168d3a0$90a148c3@office.community.net.uk> from Ray Bellis at "Oct 5, 1999 06:46:08 pm" To: rpb@community.net.uk (Ray Bellis) Date: Tue, 5 Oct 1999 20:16:19 +0200 (SAT) Cc: freebsd-questions@freebsd.org X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > I've been trying to upgrade a system with a WANic 405 card to FreeBSD > 3.3-RELEASE and whenever the sr0 device is ifconfig'ed up the system > completely freezes a couple of seconds later. > > The sr(4) driver seems almost untouched compared to the 2.2.8-stable > version, could there be a major bug in sppp(4) or similar that's causing > this? I don't know of any problems with the sr(4) driver. Sppp(4) has been rewritten between FreeBSD 2.x and 3.x, mainly to make it usable for the isdn folks too. In the process the leased line stuff lost out a little. :-( At the moment I'm busy looking at it. It is ok once the link is up, but there is a few problems with it still. The one is if the link is put into loopback. It looks like it go into transmit frenzy, which might be what you are seeing. The other problem is when the link is down long enough for sppp to timeout, then it won't bring ppp up again if the link is restored. An ifconfig sr0 down; ifconfig sr0 up normally fix this. Do you see any error or other related messages on the console? Is it totally dead? Can you still ping it over the ethernet? Assuming you have an ethernet connection too. John -- John Hay -- John.Hay@mikom.csir.co.za To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:20:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from orion.ac.hmc.edu (Orion.AC.HMC.Edu [134.173.32.20]) by hub.freebsd.org (Postfix) with ESMTP id 647C51504A for ; Tue, 5 Oct 1999 11:20:26 -0700 (PDT) (envelope-from brooks@one-eyed-alien.net) Received: from localhost (brdavis@localhost) by orion.ac.hmc.edu (8.8.8/8.8.8) with ESMTP id LAA01357; Tue, 5 Oct 1999 11:17:45 -0700 (PDT) X-Authentication-Warning: orion.ac.hmc.edu: brdavis owned process doing -bs Date: Tue, 5 Oct 1999 11:17:44 -0700 (PDT) From: Brooks Davis X-Sender: brdavis@orion.ac.hmc.edu To: Alex Bulygin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: How to check CD image? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Alex Bulygin wrote: > In the man page for Cdrecord there are some lines about how to check > CD image on Solaris and Linux. However no any hints > about FreeBSD. Or I misunderstand something? You want to use the vn device. See "man vnconfig" and "man vn". -- Brooks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:27:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from orion.ac.hmc.edu (Orion.AC.HMC.Edu [134.173.32.20]) by hub.freebsd.org (Postfix) with ESMTP id 949C714D4B for ; Tue, 5 Oct 1999 11:27:31 -0700 (PDT) (envelope-from brooks@one-eyed-alien.net) Received: from localhost (brdavis@localhost) by orion.ac.hmc.edu (8.8.8/8.8.8) with ESMTP id LAA06025; Tue, 5 Oct 1999 11:27:14 -0700 (PDT) X-Authentication-Warning: orion.ac.hmc.edu: brdavis owned process doing -bs Date: Tue, 5 Oct 1999 11:27:14 -0700 (PDT) From: Brooks Davis X-Sender: brdavis@orion.ac.hmc.edu To: Mike Jennings Cc: freebsd-questions@FreeBSD.ORG Subject: Re: adaptec In-Reply-To: <4.2.0.58.19991004202356.00975b80@post.kosone.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Mike Jennings wrote: > My question, read the book and followed the Kernel howto section. Adjusted > the GENERIC file and added the > aic0 controller subsection. > When it comes to "make depend" it fails looking for the aic0.h file . It > could not find the files or directories associated with this card? I did > install everything (programs) and for the sources I included: > a. headers > b. kernel source > c. base > > Did I miss anything? Yup, the #!CAM# comment in LINT was supposed to tell you that the aic driver is no supported under CAM (the new SCSI sybsystem). Admittidly it isn't very clear and in recent versions is has actually been removed from LINT to avoid further confusion. If you must have aic support you have to run 2.x. -- Brooks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:33:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from arutam.inch.com (ns.inch.com [207.240.140.101]) by hub.freebsd.org (Postfix) with ESMTP id 2C61315623 for ; Tue, 5 Oct 1999 11:33:27 -0700 (PDT) (envelope-from gener@ouryearbook.com) Received: from proxyplus.universe (TC1-dial-60-215.oldslip.inch.com [207.240.215.60]) by arutam.inch.com (8.9.3/8.9.3/UTIL-INCH-2.0.0) with SMTP id OAA24052 for ; Tue, 5 Oct 1999 14:31:51 -0400 (EDT) Received: from 3.105.117.10 by Proxy+; Tue, 05 Oct 1999 18:31:00 GMT From: "Gene Raytsin" To: Subject: PHP & Oracle Date: Tue, 5 Oct 1999 14:32:07 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi! Was anyone able to make php with oracle support? Regards, Gene To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:33:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bsd01.community.net.uk (bsd01.community.net.uk [195.72.164.132]) by hub.freebsd.org (Postfix) with ESMTP id DEC121531D for ; Tue, 5 Oct 1999 11:33:46 -0700 (PDT) (envelope-from rpb@community.net.uk) Received: from rpb2 (rpb2.community.net.uk [195.72.164.126]) by bsd01.community.net.uk (8.9.3/8.9.3) with SMTP id TAA06139; Tue, 5 Oct 1999 19:32:58 +0100 (BST) From: "Ray Bellis" To: "John Hay" Cc: Subject: RE: Crashes with WANic 405 and FreeBSD 3.3 Date: Tue, 5 Oct 1999 19:30:38 +0100 Message-ID: <000001bf0f5f$b87be3e0$7ea448c3@community.net.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 In-Reply-To: <199910051816.UAA92587@zibbi.mikom.csir.co.za> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > I've been trying to upgrade a system with a WANic 405 card to FreeBSD > > 3.3-RELEASE and whenever the sr0 device is ifconfig'ed up the system > > completely freezes a couple of seconds later. > > > > The sr(4) driver seems almost untouched compared to the 2.2.8-stable > > version, could there be a major bug in sppp(4) or similar that's causing > > this? > > I don't know of any problems with the sr(4) driver. Sppp(4) has been > rewritten between FreeBSD 2.x and 3.x, mainly to make it usable for > the isdn folks too. In the process the leased line stuff lost out a > little. :-( At the moment I'm busy looking at it. It is ok once the > link is up, but there is a few problems with it still. > > The one is if the link is put into loopback. It looks like it go into > transmit frenzy, which might be what you are seeing. > > The other problem is when the link is down long enough for sppp to > timeout, then it won't bring ppp up again if the link is restored. > An ifconfig sr0 down; ifconfig sr0 up normally fix this. > > Do you see any error or other related messages on the console? Is > it totally dead? Can you still ping it over the ethernet? Assuming > you have an ethernet connection too. The console remains active for about two seconds, and then freezes completely without any error messages being generated. Hardware reset is the only way out. I haven't checked whether the ethernet connection still responds, but I'm not optimistic. I'll try that out in the morning. This happened both with a Cisco 2501 back-to-back with the card and with the card completely disconnected from anything else. I guess as it's not an instantaneous crash that sppp(4) is most likely to blaim, maybe the -debug flag to ifconfig might actually show some PPP state transitions before the crash happens. I'll give that a try in the morning as well. regards, Ray. -- Ray Bellis, MA(Oxon) - Technical Director - community internet plc Windsor House, 12 High Street, Kidlington, Oxford, OX5 2PJ tel: +44 1865 856000 email: ray.bellis@community.net.uk fax: +44 1865 856001 web: http://www.community.net.uk/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:46:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dmog10.bell.ca (dmog10.bell.ca [198.235.69.18]) by hub.freebsd.org (Postfix) with ESMTP id CCC72155F4 for ; Tue, 5 Oct 1999 11:46:04 -0700 (PDT) (envelope-from ijbrown@on.bell.ca) Received: from on.bell.ca ([142.182.248.8]) by dmog10.bell.ca with ESMTP id OAA12994 for ; Tue, 5 Oct 1999 14:44:29 -0400 (EDT) Received: from on.bell.ca (dm2ck7.ON.Bell.CA [142.182.51.233]) by on.bell.ca with ESMTP id OAA06085 for ; Tue, 5 Oct 1999 14:44:25 -0400 (EDT) Message-ID: <37FA4659.F1E94CE7@on.bell.ca> Date: Tue, 05 Oct 1999 14:41:29 -0400 From: "Ian J. Brown" Organization: Bell Nexxia X-Mailer: Mozilla 4.5 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: questions@freebsd.org Subject: PPP over Ethernet Driver Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG My ISP just converted over to running PPP over Ethernet on my ADSL line and I've lost my connection to the Internet since my FreeBSD machine doesn't appear to have a driver that supports "PPP over Ethernet". Does FreeBSD have a driver that supports "PPP over Ethernet" yet? I've managed to locate drivers for Linux and Win NT, 9? etc. but none for FreeBSD as of yet. I really don't want to run a MS "operating system" if I don't have to. Any ideas? I heard that RedBack is a major user of PPP over Ethernet but I'm not sure whether or not PPP over Ethernet is a standard or not... (If it's a proprietary solution then I understand why not drivers are available yet) Thanks, IJ ======================================================================== Ian J. Brown CCIE #3372 Consultant - Bell Nexxia, Engineering and Design Toronto, Ontario (416)215-2793 ijbrown@on.bell.ca {fdNvDBZJaLfzk} ======================================================================== "Don't take life too serious...you won't get out alive!" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:53:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mercury.jorsm.com (mercury.jorsm.com [207.112.128.9]) by hub.freebsd.org (Postfix) with ESMTP id 8943D15634 for ; Tue, 5 Oct 1999 11:52:40 -0700 (PDT) (envelope-from timh@jorsm.com) Received: from jorsm.com (saturn.jorsm.com [207.112.128.41]) by mercury.jorsm.com (8.8.7/8.8.7) with ESMTP id NAA02530 for ; Tue, 5 Oct 1999 13:52:23 -0500 (CDT) Message-ID: <37FA48E6.C2B3DA6C@jorsm.com> Date: Tue, 05 Oct 1999 13:52:22 -0500 From: Tim Huffman X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Preparing to install, AGP support?? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am preparing to install FreeBSD version 3.3 release. I have a question before I get into this, though. I was looking at the supported configurations in the manual, and saw nothing about my video card. Could anyone tell me if it is supported?? I have an ATI Rage Pro on an 2X AGP bus. Any help would be greatly appreciated, as I'm itching to install this! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 11:55:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mercury.jorsm.com (mercury.jorsm.com [207.112.128.9]) by hub.freebsd.org (Postfix) with ESMTP id 89DF21561D for ; Tue, 5 Oct 1999 11:55:11 -0700 (PDT) (envelope-from timh@jorsm.com) Received: from jorsm.com (saturn.jorsm.com [207.112.128.41]) by mercury.jorsm.com (8.8.7/8.8.7) with ESMTP id NAA02833 for ; Tue, 5 Oct 1999 13:55:08 -0500 (CDT) Message-ID: <37FA498B.9961B7EB@jorsm.com> Date: Tue, 05 Oct 1999 13:55:07 -0500 From: Tim Huffman X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: (no subject) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG subscribe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12: 7:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 05D6F14FA6 for ; Tue, 5 Oct 1999 12:07:41 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 13895 invoked from network); 5 Oct 1999 19:07:40 -0000 Received: from userat31.uk.uudial.com (HELO marder-1.) (62.188.137.134) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 19:07:40 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA01020; Tue, 5 Oct 1999 20:07:32 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 20:07:31 +0100 From: Mark Ovens To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: MS compatible editor? Message-ID: <19991005200731.B315@marder-1> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 04:03:22AM +0100, J McKitrick wrote: > Besides staroffice, are there any FreeBSD editors/WP's that can save in > .doc > format? > WordPerect 8 for Linux. > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:10: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 8EB9C150FC for ; Tue, 5 Oct 1999 12:10:01 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 14196 invoked from network); 5 Oct 1999 19:09:59 -0000 Received: from userat31.uk.uudial.com (HELO marder-1.) (62.188.137.134) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 19:09:59 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA01034; Tue, 5 Oct 1999 20:09:51 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 20:09:50 +0100 From: Mark Ovens To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: ISP connections problems Message-ID: <19991005200950.C315@marder-1> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 05:49:31AM +0100, J McKitrick wrote: > I'm having a problem with both of my ISP's. One is PAP, one is not, one > is local, one is not. But both seem to cut out after about ten minutes. 10 minutes of idle time? What is ``timeout'' set to in your /etc/ppp/ppp.conf? The default is 300 (5 minutes) > ANy idea why? I don't rememeber this happening with windows. > > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:14:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 5253814DAB for ; Tue, 5 Oct 1999 12:14:42 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 14499 invoked from network); 5 Oct 1999 19:12:14 -0000 Received: from userat31.uk.uudial.com (HELO marder-1.) (62.188.137.134) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 19:12:14 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA01057; Tue, 5 Oct 1999 20:12:07 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 20:12:06 +0100 From: Mark Ovens To: chris@tourneyland.com Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-Release - problem with PATH? Message-ID: <19991005201206.D315@marder-1> References: <01bf0efe$79f14400$0000e9c1@serv2.binep.ac.ru> <3.0.6.32.19991005010621.008fb560@mail.9netave.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <3.0.6.32.19991005010621.008fb560@mail.9netave.net> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 01:06:21AM -0500, chris@tourneyland.com wrote: > Thanks to everyone who told me about the wonderful rehash command. I firmly > believe it will completely change my life. I wonder why more make programs > don't have it as part of their rigamarole? Maybe it takes a while. Oh well. > I just wonder why ``make install'' doesn't run rehash as the last thing it does (after testing the shell it's running in, if it only applies to csh(1)) > Thanks again all! > Chris > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:15:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id A238314DAB for ; Tue, 5 Oct 1999 12:15:10 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id OAA96924; Tue, 5 Oct 1999 14:14:03 -0500 (CDT) (envelope-from dan) Date: Tue, 5 Oct 1999 14:14:03 -0500 From: Dan Nelson To: Gene Raytsin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: PHP & Oracle Message-ID: <19991005141403.A96740@dan.emsphone.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 05), Gene Raytsin said: > Hi! > Was anyone able to make php with oracle support? Not until Oracle releases FreeBSD native client libraries. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:17:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gaia.engr.latech.edu (gaia.engr.LaTech.edu [138.47.18.49]) by hub.freebsd.org (Postfix) with ESMTP id B9DEE14DAB for ; Tue, 5 Oct 1999 12:17:26 -0700 (PDT) (envelope-from lyl001@coes.latech.edu) Received: from thal-s-pewter (dialup-63.remote.LaTech.edu [138.47.16.63]) by gaia.engr.latech.edu (8.9.1/8.9.1) with SMTP id OAA23024 for ; Tue, 5 Oct 1999 14:17:24 -0500 (CDT) Message-Id: <3.0.6.32.19991005141652.0079ab60@coes.latech.edu> X-Sender: lyl001@coes.latech.edu X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Tue, 05 Oct 1999 14:16:52 -0500 To: freebsd-questions@FreeBSD.ORG From: Mary Lee Subject: 2nd lan card Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Salutatins... i was woundering if there was a sigte, or a tutorial that could help figure out how to hook up 2 lan cards to my puter... I have an isa 486 dx2 66 20 meg ram dell/intel motherboard i have a lantastic jumpered lan card using i/o 300, irq 10, port 0xd000 as ed0 (this lan card is fine ) the problem is this new Allied Telesyn AT2000 PnP i thought i could just put in... ed1 i/o 300, irq 15, port 0xd800, but it didn't reckognise it... i red their manual, and it wanted me to run some dos program to set the settings... I thought PnP would roll over to the next avalible settings... I am so lost with PnP, coule you point me in the rt direction ??? ps i only have irq 11,12,13,14,15 open... :) thank you Stephen... ( using a friend's puter lyl001 = mary ) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:21: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 92E1C14E5C for ; Tue, 5 Oct 1999 12:20:57 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 8485 invoked from network); 5 Oct 1999 19:18:28 -0000 Received: from userat31.uk.uudial.com (HELO marder-1.) (62.188.137.134) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 19:18:28 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA01079; Tue, 5 Oct 1999 20:18:20 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 20:18:20 +0100 From: Mark Ovens To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: ppp permissions Message-ID: <19991005201819.E315@marder-1> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 01:20:38PM +0100, J McKitrick wrote: > What permissions do i need to set to allow any user to connect with ppp? > Add: allow user to /etc/ppp/ppp.conf and make sure those users are members of the network group. > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:25:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rdc2.on.home.com (ha1.rdc2.on.home.com [24.9.0.15]) by hub.freebsd.org (Postfix) with ESMTP id E26CE14E5C for ; Tue, 5 Oct 1999 12:25:48 -0700 (PDT) (envelope-from street@iname.com) Received: from mired.eh.local ([24.64.136.188]) by mail.rdc2.on.home.com (InterMail v4.01.01.07 201-229-111-110) with ESMTP id <19991005192451.FULY5795.mail.rdc2.on.home.com@mired.eh.local>; Tue, 5 Oct 1999 12:24:51 -0700 Received: (from kws@localhost) by mired.eh.local (8.9.3/8.9.3) id NAA38226; Tue, 5 Oct 1999 13:45:31 -0400 (EDT) (envelope-from kws) To: Ruslan Ermilov Cc: Jenkins.Mike@epamail.epa.gov, questions@FreeBSD.ORG Subject: Re: ipfw and ports > 1023? References: <85256801.0051E276.00@EPAHUB2.RTP.EPA.GOV> <19991005190127.D8085@relay.ucb.crimea.ua> From: Kevin Street Date: 05 Oct 1999 13:45:30 -0400 In-Reply-To: Ruslan Ermilov's message of "Tue, 5 Oct 1999 19:01:27 +0300" Message-ID: <874sg51z2d.fsf@mired.eh.local> Lines: 38 X-Mailer: Gnus v5.6.45/XEmacs 21.1 - "20 Minutes to Nikko" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ruslan Ermilov writes: > On Tue, Oct 05, 1999 at 09:59:33AM -0500, Jenkins.Mike@epamail.epa.gov wrote: > > How do you say "ports > 1023" in ipfw? > > I see the port-port syntax but that is for a limited range of ports. > > > ipfw(8) manpage, in particular, says: > > : With the TCP and UDP protocols, optional ports may be specified as: > : > : {port|port-port}[,port[,...]] > : > : Service names (from /etc/services) may be used instead of numeric port > : values. A range may only be specified as the first value, and the length > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > : of the port list is limited to IP_FW_MAX_PORTS (as defined in > : /usr/src/sys/netinet/ip_fw.h) ports. A `\' can be used to escape the `-' > : character in a service name: > > So, we say "1024-". Well, yes that works, but that is not what the description you quoted means. "A range may only be specified as the first value" means "if you specify a range it must be the first value in the list". So you can not do: ipfw add 1 deny udp from any 300,1024-1500 to any but you can do: ipfw add 1 deny udp from any 1024-1500,300 to any You can not have multiple ranges in the same ipfw statement either. The "1024-" notation works (at least in current) but is undocumented. The syntax should really be: {port|port-port|port-}[,port[,...]] -- Kevin Street street@iname.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:28:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.skynetweb.com (mail.hecenter.com [208.231.1.17]) by hub.freebsd.org (Postfix) with ESMTP id E75A115611 for ; Tue, 5 Oct 1999 12:28:11 -0700 (PDT) (envelope-from pryker@skynetweb.com) Received: from skynetweb.com [208.231.1.80] by mail.skynetweb.com with ESMTP (SMTPD32-5.04) id A2EC1780114; Tue, 05 Oct 1999 15:35:08 EDT Message-ID: <37FA070D.6906F504@skynetweb.com> Date: Tue, 05 Oct 1999 15:11:25 +0100 From: Phillip Ryker Reply-To: pryker@skynetweb.com Organization: SkyNetWEB Ltd. X-Mailer: Mozilla 4.51 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Upgrading from 2.2.8 -STABLE to 3.3 -STABLE Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is there a tutorial available on the process of upgrading from 2.2.8 to the latest 3.3 branch?? If so could someone please kindly send me the URL? Thanks -- -------------------------------------------------------------------- Phillip Ryker pryker@skynetweb.com President SkyNetWEB Ltd Phone: 410-563-6384 Ext 12 1301 S. Baylis St. Fax: 410-563-5457 Baltimore Md. 21224 -------------------------------------------------------------------- Dedicated servers, co-location and web hosting services... -------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:43: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mb07.swip.net (mb07.swip.net [193.12.122.211]) by hub.freebsd.org (Postfix) with ESMTP id ABC3E15651 for ; Tue, 5 Oct 1999 12:41:11 -0700 (PDT) (envelope-from juha.korkiakangas@swipnet.se) Received: from d212-151-232-110.swipnet.se (d212-151-232-110.swipnet.se [212.151.232.110]) by mb07.swip.net (8.8.8/8.8.8) with ESMTP id VAA21696 for ; Tue, 5 Oct 1999 21:39:46 +0200 (MET DST) Date: Tue, 5 Oct 1999 21:40:20 +0200 (CEST) From: juha.korkiakangas@swipnet.se X-Sender: juha@localhost.localdomain Reply-To: juha.korkiakangas@swipnet.se To: freebsd-questions@freebsd.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG unsubscribe freebsd-questions To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:48:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 62FE915603 for ; Tue, 5 Oct 1999 12:48:11 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 18931 invoked from network); 5 Oct 1999 19:48:10 -0000 Received: from userbq99.uk.uudial.com (HELO marder-1.) (62.188.146.193) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 19:48:10 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA01181 for questions@freebsd.org; Tue, 5 Oct 1999 20:37:28 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 20:37:28 +0100 From: Mark Ovens To: questions@freebsd.org Subject: WP8 won't open files on FAT partitions Message-ID: <19991005203728.F315@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've discovered a problem with Wordperfect 8. It gives the error "An error occurred opening the file" when trying to open a file (text, RTF, Word 2/95/97) residing on a FAT partition. If I copy the same file to a UFS (or NTFS for that matter) partition it opens it fine. My FAT partition is owned by the user trying to open the file and all the files have 777 perms. Has anyone else seen this problem and, if so, do you know haw to fix it? -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:56: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sabre.dhs.org (rocky.ee.cua.edu [136.242.140.6]) by hub.freebsd.org (Postfix) with ESMTP id 5EFF21560D for ; Tue, 5 Oct 1999 12:55:54 -0700 (PDT) (envelope-from sabre@sabre.dhs.org) Received: from localhost (sabre@localhost) by sabre.dhs.org (8.9.3/8.9.3) with ESMTP id OAA01820 for ; Tue, 5 Oct 1999 14:10:37 GMT (envelope-from sabre@sabre.dhs.org) Date: Tue, 5 Oct 1999 14:10:37 +0000 (GMT) From: Sabre To: freebsd-questions@FreeBSD.ORG Subject: Logging activity on a FreeBSD router/firewall... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hey all, what programs are available on FBSD that will log what web sites that my users go to? These users are not local on the machine, they are on Win machines accessing the internet through a FBSD router/gateway/firewall Any help is appriciated! Sabre To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 12:57:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from morphy.ssi.net (morphy.ssi.net [209.251.96.2]) by hub.freebsd.org (Postfix) with ESMTP id D1E2215603 for ; Tue, 5 Oct 1999 12:57:46 -0700 (PDT) (envelope-from billm@flink.com) Received: from admin (n253.dial.flink.com [209.251.97.253]) by morphy.ssi.net (8.8.8/8.8.8/Debian/GNU) with SMTP id OAA25800 for ; Tue, 5 Oct 1999 14:57:44 -0500 Reply-To: From: "Bill McMilleon" To: Subject: Bridging ethernet over serial devices: possible? How? Date: Tue, 5 Oct 1999 14:57:41 -0500 Message-ID: <000101bf0f6b$e26f8560$6401a8c0@mchome> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 In-Reply-To: <000001bf0f5f$b87be3e0$7ea448c3@community.net.uk> Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have two external modems and would like to do a LAN to LAN connection that bridges ethernet frames (I need IP and IPX on both ends and it needs to look like one big LAN, read: no NAT). Can anyone point me in the direction I need to go to get this working under FreeBSD (3.2 or 3.3)? I've seen a Bridging-HOWTO for Linux that discusses the program BRCFG in applications for NIC-to-NIC bridging, but I don't see anything about NIC-to-serial device bridging. One other thing: does the linux program brcfg work under FreeBSD's linux emulation? TIA, Bill McMilleon billmc@internetaddress.nospam.com Alltel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13: 1:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bingnet2.cc.binghamton.edu (bingnet2.cc.binghamton.edu [128.226.1.18]) by hub.freebsd.org (Postfix) with ESMTP id E7637155E4 for ; Tue, 5 Oct 1999 13:00:50 -0700 (PDT) (envelope-from zzhang@cs.binghamton.edu) Received: from sol.cs.binghamton.edu (cs1-gw.cs.binghamton.edu [128.226.171.72]) by bingnet2.cc.binghamton.edu (8.9.3/8.9.3) with SMTP id PAA00717; Tue, 5 Oct 1999 15:59:08 -0400 (EDT) Date: Tue, 5 Oct 1999 15:44:39 -0400 (EDT) From: Zhihui Zhang To: Alfred Perlstein Cc: "Robert M. Luedtke" , freeBSD-questions@FreeBSD.ORG Subject: Re: install over networked computers In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Alfred Perlstein wrote: > > On Tue, 5 Oct 1999, Robert M. Luedtke wrote: > > > I have a FreeBSD 2.2.8 system running on a Pentium II Compaq Presario with a > > DVD-ROM drive. I have an old AST machine (Pentium 100MHz) without a CD-ROM > > drive. They both have ethernet cards. I can network them together and > > pinging shows that they are communicating with each other. I looked in the > > installation FAQs looking for a way to install FreeBSD on the AST machine > > over this intranet using the DVD-ROM drive of the Compaq for the > > installation CD. I couldn't find anything. This is probably well covered > > somewhere in the docs and I'm just over looking it. Any help, suggestions, > > guidance, etc. would we very appreciated. > > Export the cdrom via NFS and install over nfs, or provide > ftp access to the mounted cdrom and do an ftp instal via specific > URL. Is it possible to install from a cdrom image by using vnconfig, mount_cd9660 and then NFS export it? I tried this today and failed. -Zhihui To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13: 3: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 5365B1561D for ; Tue, 5 Oct 1999 13:02:33 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id NAA22164; Tue, 5 Oct 1999 13:19:42 -0700 (PDT) Date: Tue, 5 Oct 1999 13:19:42 -0700 (PDT) From: Alfred Perlstein To: Zhihui Zhang Cc: "Robert M. Luedtke" , freeBSD-questions@FreeBSD.ORG Subject: Re: install over networked computers In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Zhihui Zhang wrote: > > On Tue, 5 Oct 1999, Alfred Perlstein wrote: > > > > > On Tue, 5 Oct 1999, Robert M. Luedtke wrote: > > > > > I have a FreeBSD 2.2.8 system running on a Pentium II Compaq Presario with a > > > DVD-ROM drive. I have an old AST machine (Pentium 100MHz) without a CD-ROM > > > drive. They both have ethernet cards. I can network them together and > > > pinging shows that they are communicating with each other. I looked in the > > > installation FAQs looking for a way to install FreeBSD on the AST machine > > > over this intranet using the DVD-ROM drive of the Compaq for the > > > installation CD. I couldn't find anything. This is probably well covered > > > somewhere in the docs and I'm just over looking it. Any help, suggestions, > > > guidance, etc. would we very appreciated. > > > > Export the cdrom via NFS and install over nfs, or provide > > ftp access to the mounted cdrom and do an ftp instal via specific > > URL. > > Is it possible to install from a cdrom image by using vnconfig, > mount_cd9660 and then NFS export it? I tried this today and failed. I don't see why not, perhaps you can explain where it failed? -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13: 9: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bingnet2.cc.binghamton.edu (bingnet2.cc.binghamton.edu [128.226.1.18]) by hub.freebsd.org (Postfix) with ESMTP id 696BF15616 for ; Tue, 5 Oct 1999 13:09:01 -0700 (PDT) (envelope-from zzhang@cs.binghamton.edu) Received: from sol.cs.binghamton.edu (cs1-gw.cs.binghamton.edu [128.226.171.72]) by bingnet2.cc.binghamton.edu (8.9.3/8.9.3) with SMTP id QAA05162; Tue, 5 Oct 1999 16:08:04 -0400 (EDT) Date: Tue, 5 Oct 1999 15:53:35 -0400 (EDT) From: Zhihui Zhang To: Jeroen Ruigrok/Asmodai Cc: Doug , freebsd-questions@FreeBSD.ORG Subject: Re: Install FreeBSD from another machine In-Reply-To: <19991003235431.E35757@daemon.ninth-circle.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 3 Oct 1999, Jeroen Ruigrok/Asmodai wrote: > On [19991003 22:31], Zhihui Zhang (zzhang@cs.binghamton.edu) wrote: > > >I installed FreeBSD from CD-ROM and via FTP sites many times. But > >installing from a NFS server or another filesystem is not well documented. > >So please give me a little more information. > > Simplest installs I did: > > insert CD in host. Mount CD-ROM. Insert bootdisks into the other hosts, > configure everything. Configure network. Set installation media to use > ftp and then specify an URL which is the address or ip-address of your > host with the CD-ROM mounted. Log in as an user cd simply install from: > > ftp://host/../../../cdrom or something along those lines depending on > set-up. > > Of course, you could also just change /etc/export, NFS mount the cd-rom > driver and use the NFS install option. > Thanks for your reply. Today, I tried the following: (1) Download CD image into /usr/cd_image/3.3-install.cd0 (2) vnconfig /dev/vn0 /usr/cd_image/3.3-install.cd0 (3) mount -t cd9660 /dev/vn0 /mnt Can I use /mnt to replace the normal /cdrom which corresponds to the actual CD-ROM not just a CD image? If so, there is no need to use a CD-ROM as long as I keep the image on the hard disk. -Zhihui To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:11:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id A47F8150D4 for ; Tue, 5 Oct 1999 13:11:55 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11Yavo-0003ne-00; Tue, 5 Oct 1999 13:11:28 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id NAA21110; Tue, 5 Oct 1999 13:11:19 -0700 Date: Tue, 5 Oct 1999 13:11:19 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: WP8 won't open files on FAT partitions To: Mark Ovens Cc: questions@freebsd.org In-Reply-To: <19991005203728.F315@marder-1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 5-Oct-99 at 13:04, Mark Ovens (mark@ukug.uk.freebsd.org) wrote: > I've discovered a problem with Wordperfect 8. It gives the error > "An error occurred opening the file" when trying to open a file > (text, RTF, Word 2/95/97) residing on a FAT partition. > > If I copy the same file to a UFS (or NTFS for that matter) partition > it opens it fine. > > My FAT partition is owned by the user trying to open the file and > all the files have 777 perms. > > Has anyone else seen this problem and, if so, do you know haw to > fix it? This is kind of a tenuous connection, so it may not apply; but some Linux users on the StarOffice lists had a problem with files on FAT partitions which were mounted on directories with upper-case letters in the path. (In one case he was mounting it on '/C' Changing that to '/c' fixed it.) Since WP8 is a Linux app, it is possible that the root of the problem is in the Linux libraries, and would be inherited by FreeBSD's Linux mode. -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:13:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from merlin.rtpnc.epa.gov (merlin.rtpnc.epa.gov [134.67.208.148]) by hub.freebsd.org (Postfix) with ESMTP id EDEF61510B for ; Tue, 5 Oct 1999 13:13:44 -0700 (PDT) (envelope-from Jenkins.Mike@epamail.epa.gov) Received: from myrtle.rtpnc.epa.gov by epamail.epa.gov (PMDF V5.1-12 #26439) with ESMTP id <0FJ5007PV9WPM0@epamail.epa.gov> for questions@freebsd.org; Tue, 5 Oct 1999 15:24:38 -0400 (EDT) Received: from EPAHUB2.RTP.EPA.GOV by epamail.epa.gov (PMDF V5.1-12 #26438) with SMTP id <0FJ5007ZB938DR@epamail.epa.gov> for questions@freebsd.org; Tue, 05 Oct 1999 15:07:17 -0400 (EDT) Received: by EPAHUB2.RTP.EPA.GOV(Lotus SMTP MTA v4.6.3 hotfix 1 (767.1 12-15-1998)) id 85256801.00688541 ; Tue, 05 Oct 1999 15:01:38 -0400 Date: Tue, 05 Oct 1999 14:06:10 -0500 From: Jenkins.Mike@epamail.epa.gov Subject: Re: ipfw and ports > 1023? To: dnelson@emsphone.com, ru@ucb.crimea.ua Cc: questions@freebsd.org Message-id: <85256801.006877BD.00@EPAHUB2.RTP.EPA.GOV> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline X-Lotus-FromDomain: EPA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I wrote: >> How do you say "ports > 1023" in ipfw? >> I see the port-port syntax but that is for a limited range of ports. Dan Nelson replied: >port 1024-65535 Ruslan Ermilov replied with ipfw(8) and: >So, we say "1024-". My second sentence in the original post hinted about this but ... In the ipfw(8) manual page it says: "A range may only be specified as the first value, and the length of the port list is limited to IP_FW_MAX_PORTS (as defined in /usr/src/sys/netinet/ip_fw.h) ports." IP_FW_MAX_PORTS is 10 so the maximum number of ports listed is 10. So 20-29 would be ok (and so would 20-24,50,60,70,80,90) but 1024-65535 is NOT ok and probably results in 1024-1033. I think the intent is to allow a small number of ports on a single rule rather than having multiple rules. Eg: allow tcp from any to any 25,80,79 allow tcp from any to any 25 allow tcp from any to any 80 allow tcp from any to any 79 Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:23:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id BA2C414E1F for ; Tue, 5 Oct 1999 13:23:04 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 23362 invoked from network); 5 Oct 1999 20:23:02 -0000 Received: from useraj03.uk.uudial.com (HELO marder-1.) (62.188.133.132) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 20:23:02 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id VAA01478; Tue, 5 Oct 1999 21:22:55 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 21:22:55 +0100 From: Mark Ovens To: patl@phoenix.volant.org Cc: questions@freebsd.org Subject: Re: WP8 won't open files on FAT partitions Message-ID: <19991005212255.G315@marder-1> References: <19991005203728.F315@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 01:11:19PM -0700, patl@phoenix.volant.org wrote: > On 5-Oct-99 at 13:04, Mark Ovens (mark@ukug.uk.freebsd.org) wrote: > > I've discovered a problem with Wordperfect 8. It gives the error > > "An error occurred opening the file" when trying to open a file > > (text, RTF, Word 2/95/97) residing on a FAT partition. > > > > If I copy the same file to a UFS (or NTFS for that matter) partition > > it opens it fine. > > > > My FAT partition is owned by the user trying to open the file and > > all the files have 777 perms. > > > > Has anyone else seen this problem and, if so, do you know haw to > > fix it? > > This is kind of a tenuous connection, so it may not apply; but > some Linux users on the StarOffice lists had a problem with files > on FAT partitions which were mounted on directories with upper-case > letters in the path. (In one case he was mounting it on '/C' > Changing that to '/c' fixed it.) > > Since WP8 is a Linux app, it is possible that the root of the > problem is in the Linux libraries, and would be inherited by > FreeBSD's Linux mode. > Virtual Beer for you, my friend. That was exactly it :) I had the FAT mounted on /drvC, changed it to /drvc and it works perfectly (Wordperfectly?). Curiously it didn't work by doing ``ln -s /drvC /drvc'' and then using /drvc in WP's File Open dialogue so it must be the actual mountpoint. Thanks. > > > -Pat -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:27:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id CE7A314D2F for ; Tue, 5 Oct 1999 13:27:09 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id NAA74407; Tue, 5 Oct 1999 13:25:20 -0700 (PDT) Message-ID: <37FA5EAA.7087E5F5@owp.csus.edu> Date: Tue, 05 Oct 1999 20:25:14 +0000 From: Joseph Scott X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: Gene Raytsin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: PHP & Oracle References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Gene Raytsin wrote: > > Hi! > Was anyone able to make php with oracle support? > > Regards, > Gene I know that I tried for awhile and it just didn't happen. My guess would be that you might be able to do it if you did the whole thing using the new linux compat stuff, running a linux shell and the whole 9 nine yards. I don't know that it will work as I've never tried it. I'm not sure it's desirable even if it does work. I'm so not happy with Oracle at this point that all of my effort has gone entirely towards PHP & MySQL. Thus far I've got everything I need, and the price is much less :-) -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:29:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scientia.demon.co.uk (scientia.demon.co.uk [212.228.14.13]) by hub.freebsd.org (Postfix) with ESMTP id C6B05156A3 for ; Tue, 5 Oct 1999 13:28:51 -0700 (PDT) (envelope-from ben@scientia.demon.co.uk) Received: from strontium.scientia.demon.co.uk ([192.168.0.4] ident=exim) by scientia.demon.co.uk with esmtp (Exim 3.032 #1) id 11YZJ8-0004VU-00; Tue, 05 Oct 1999 19:27:26 +0100 Received: (from ben) by strontium.scientia.demon.co.uk (Exim 3.032 #1) id 11YZJ8-0000FY-00; Tue, 05 Oct 1999 19:27:26 +0100 Date: Tue, 5 Oct 1999 19:27:26 +0100 From: Ben Smithurst To: imsleepy Cc: freebsd-questions@freebsd.org Subject: Re: pine error - pine starts readonly Message-ID: <19991005192726.D460@strontium.scientia.demon.co.uk> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG imsleepy wrote: > /tmp kept getting big, so i changed /tmp to a symlink to /var/tmp, and i > guess it got root permissions, so pine couldn't use it or something. for > the time being i did 'chmod a+rw /tmp' and 'chmod a+rw /var/tmp'. is that > correct? im not really fond of having some gapeing hole in on my computer > because of me not setting the attributes correctly. also, what > permissions should /var have? thanks and sorry /tmp, /var/tmp, /usr/tmp, and any other system-wide temporary directories should be mode 1777. /var itself should be 755. Note if /tmp is a symlink its permissions are irrelevant, it's the target's permissions which count. -- Ben Smithurst | PGP: 0x99392F7D ben@scientia.demon.co.uk | key available from keyservers and | ben+pgp@scientia.demon.co.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:30: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scientia.demon.co.uk (scientia.demon.co.uk [212.228.14.13]) by hub.freebsd.org (Postfix) with ESMTP id 381AF1566E for ; Tue, 5 Oct 1999 13:28:51 -0700 (PDT) (envelope-from ben@scientia.demon.co.uk) Received: from strontium.scientia.demon.co.uk ([192.168.0.4] ident=exim) by scientia.demon.co.uk with esmtp (Exim 3.032 #1) id 11YZ6v-0004VC-00; Tue, 05 Oct 1999 19:14:49 +0100 Received: (from ben) by strontium.scientia.demon.co.uk (Exim 3.032 #1) id 11YZ6v-0000F5-00; Tue, 05 Oct 1999 19:14:49 +0100 Date: Tue, 5 Oct 1999 19:14:49 +0100 From: Ben Smithurst To: Brett Taylor Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: color ls command Message-ID: <19991005191449.C460@strontium.scientia.demon.co.uk> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Brett Taylor wrote: > Port: colorls-2.2.7 > Path: /usr/ports/misc/colorls There's misc/gnuls too, apparently that's the one from Linux so might be more familiar to some (colorls might be almost identical, I haven't actually tried either). -- Ben Smithurst | PGP: 0x99392F7D ben@scientia.demon.co.uk | key available from keyservers and | ben+pgp@scientia.demon.co.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:30: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scientia.demon.co.uk (scientia.demon.co.uk [212.228.14.13]) by hub.freebsd.org (Postfix) with ESMTP id F0E9E15674 for ; Tue, 5 Oct 1999 13:28:51 -0700 (PDT) (envelope-from ben@scientia.demon.co.uk) Received: from strontium.scientia.demon.co.uk ([192.168.0.4] ident=exim) by scientia.demon.co.uk with esmtp (Exim 3.032 #1) id 11YZ5l-0004VA-00; Tue, 05 Oct 1999 19:13:37 +0100 Received: (from ben) by strontium.scientia.demon.co.uk (Exim 3.032 #1) id 11YZ5l-0000Es-00; Tue, 05 Oct 1999 19:13:37 +0100 Date: Tue, 5 Oct 1999 19:13:37 +0100 From: Ben Smithurst To: Ertan Kucukoglu Cc: J McKitrick , FreeBSD Subject: Re: color ls command Message-ID: <19991005191337.B460@strontium.scientia.demon.co.uk> References: <007401bf0e85$48dc4e60$14000080@com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: <007401bf0e85$48dc4e60$14000080@com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ertan Kucukoglu wrote: >> IS this available for FreeBSD? > > Try ls -G. Uh, try to give answers which work. ls -G is an unknown option in FreeBSD's ls(1). As someone else said, there is a port for colour ls, though why you would want it I don't know. -- Ben Smithurst | PGP: 0x99392F7D ben@scientia.demon.co.uk | key available from keyservers and | ben+pgp@scientia.demon.co.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:39: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bingnet2.cc.binghamton.edu (bingnet2.cc.binghamton.edu [128.226.1.18]) by hub.freebsd.org (Postfix) with ESMTP id 3197B1567F for ; Tue, 5 Oct 1999 13:37:02 -0700 (PDT) (envelope-from zzhang@cs.binghamton.edu) Received: from sol.cs.binghamton.edu (cs1-gw.cs.binghamton.edu [128.226.171.72]) by bingnet2.cc.binghamton.edu (8.9.3/8.9.3) with SMTP id QAA19204; Tue, 5 Oct 1999 16:36:59 -0400 (EDT) Date: Tue, 5 Oct 1999 16:22:29 -0400 (EDT) From: Zhihui Zhang To: Alfred Perlstein Cc: "Robert M. Luedtke" , freeBSD-questions@FreeBSD.ORG Subject: Re: install over networked computers In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Alfred Perlstein wrote: > > On Tue, 5 Oct 1999, Zhihui Zhang wrote: > > > > > On Tue, 5 Oct 1999, Alfred Perlstein wrote: > > > > > > > > On Tue, 5 Oct 1999, Robert M. Luedtke wrote: > > > > > > > I have a FreeBSD 2.2.8 system running on a Pentium II Compaq Presario with a > > > > DVD-ROM drive. I have an old AST machine (Pentium 100MHz) without a CD-ROM > > > > drive. They both have ethernet cards. I can network them together and > > > > pinging shows that they are communicating with each other. I looked in the > > > > installation FAQs looking for a way to install FreeBSD on the AST machine > > > > over this intranet using the DVD-ROM drive of the Compaq for the > > > > installation CD. I couldn't find anything. This is probably well covered > > > > somewhere in the docs and I'm just over looking it. Any help, suggestions, > > > > guidance, etc. would we very appreciated. > > > > > > Export the cdrom via NFS and install over nfs, or provide > > > ftp access to the mounted cdrom and do an ftp instal via specific > > > URL. > > > > Is it possible to install from a cdrom image by using vnconfig, > > mount_cd9660 and then NFS export it? I tried this today and failed. > > I don't see why not, perhaps you can explain where it failed? I made a mistake in my posting. I am sorry. I actually tried to install from a filesystem /mnt into another partition on the same machine: # vnconfig /dev/vn0c /usr/cd_image/3.3-install.cd0 # mount -t cd9660 /dev/vn0c /mnt # /stand/sysinstall (I did not try to NFS export /mnt because on my client I get NFS Portmap not registered error). Inside /stand/sysinstall, I choose another partition. Everything looks OK except that when I tries to boot from that partition, I got "invalid partition". It seems to me that if you want to do a fresh installation or overwrite everything, you should always boot from boot floppies or CD-ROM instead of using /stand/sysinstall directly. -Zhihui To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:53:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rdc1.va.home.com (ha1.rdc1.va.home.com [24.2.32.66]) by hub.freebsd.org (Postfix) with ESMTP id 54FEC14ECA for ; Tue, 5 Oct 1999 13:53:34 -0700 (PDT) (envelope-from cusolito@home.com) Received: from cx747502e ([24.6.177.214]) by mail.rdc1.va.home.com (InterMail v4.01.01.00 201-229-111) with SMTP id <19991005205333.CEQN1253.mail.rdc1.va.home.com@cx747502e> for ; Tue, 5 Oct 1999 13:53:33 -0700 Reply-To: From: "Mathew J. Cusolito" To: Subject: CD Installation Problems Date: Tue, 5 Oct 1999 16:58:31 -0400 Message-ID: <000101bf0f74$615a6400$d6b10618@vbch1.va.home.com> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0002_01BF0F52.DA48C400" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 X-MS-TNEF-Correlator: 000000000AE3CF70A1D9D21197C1706F4DC1FDF7E4922000 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0002_01BF0F52.DA48C400 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit I am having trouble getting the CD drives to work. I have two CD drives (a memorex- CDRW 4420, and a 24x from HI-Val [though I am not actually sure of who manufactured it) working from a sound card/controller based on the OPTi931 chipset. The memorex is set as the master, and the other as the slave. To acess them with MS DOS, I use the following: config sys device=a:\OPTi931\CDSETUP.SYS /T:I /P:36e,168 /I:a DEVICE=a:\HIMEM.SYS DEVICE=a:\EMM386.EXE NOEMS X=A000-B0FF I=B100-B7FF X=B800-C7FF I=C800-EFFF X=F000-F7FF H=64 A=7 D=32 BUFFERS=43,0 lastdrive=l FILES=60 DOS=UMB, high FCBS=16,0 device=a:\cdromdrv\atapicd.sys /d:cd003 and autoexec bat: SET SOUND16=a:\OPTi931 a:\CDROMDRV\MSCDEX /V /D:CD003 /M:10 a:\OPTi931\sndtune If you could be of any assistance in making this work for my FreeBSD installation, I would be most appreciative. thanks in advance Mat Cusolito cusolito@home.com ------=_NextPart_000_0002_01BF0F52.DA48C400 Content-Type: application/ms-tnef; name="winmail.dat" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="winmail.dat" eJ8+Ih8UAQaQCAAEAAAAAAABAAEAAQeQBgAIAAAA5AQAAAAAAADoAAEIgAcAGAAAAElQTS5NaWNy b3NvZnQgTWFpbC5Ob3RlADEIAQ2ABAACAAAAAgACAAEGgAMADgAAAM8HCgAFABAAOgAAAAIAMQEB A5AGACQIAAAnAAAACwACAAEAAAALACMAAAAAAAMAJgAAAAAACwApAAAAAAADADYAAAAAAB4AcAAB AAAAGQAAAENEIEluc3RhbGxhdGlvbiBQcm9ibGVtcwAAAAACAXEAAQAAABYAAAABvw90W9J82w9Z e0QR05fCAOCYBYDdAAACAR0MAQAAABcAAABTTVRQOkNVU09MSVRPQEhPTUUuQ09NAAALAAEOAAAA AEAABg4APKlOdA+/AQIBCg4BAAAAGAAAAAAAAAAK489wodnSEZfBcG9Nwf33woAAAAsAHw4BAAAA AwAGEFpPGIkDAAcQ5AIAAB4ACBABAAAAZQAAAElBTUhBVklOR1RST1VCTEVHRVRUSU5HVEhFQ0RE UklWRVNUT1dPUktJSEFWRVRXT0NERFJJVkVTKEFNRU1PUkVYLUNEUlc0NDIwLEFOREEyNFhGUk9N SEktVkFMVEhPVUdISUEAAAAAAgEJEAEAAACfAwAAmwMAAMwEAABMWkZ1L6Y9nwMACgByY3BnMTI1 FjIA+Atgbg4QMDMznQH3IAKkA+MCAGNoCsDgc2V0MCAHEwKDAFBfAvIQ2QhVB7ICgH0KgXVGYwBQ CwN1bG4CIGWBC6YgSSBhbSARAKJ2C4BnIHQDYHUCYKhlIGcRQHQWQ2gW4FBDRCBkBRB2B5F0iG8g dwWway4gFbEbFhEW4HQYkBe5KGEgJweABGAJcHgtF7FSVyggNDQB0CwV0G5kQRXQIDI0eCADUiCQ SEktVgdAIFsXgHkIYGdoFbQU8AVAANB0wnUHQGx5IHMIcBbgPG9mGIAdQBpwAHB1ZsMeMglxIGl0 KRiDFkJbHGMaYHMIYBvRYwsRL58FoAIwA2AegBOBYmERMCcb4AIgF3NPUAdgOTO6MSHQaAUgETEY 0VQXkf8ahSBABCARMRXQGEEk4iLw/nQEkBukF4IeABeQBcAmBf5zC2AYICSiGHAA0AeQJhOPFfAD 8BeABdJET1MboL0VwHURMBdzAhAegG8D8H0PIDoKogqECoAh0AIgZvJpFmBzeRDAK8kSARfgpmUW MCkAPWEroFwjtQMusBfAU0VUVVAuRFNZBfAvVDoVwC8AUDozNmUsMTZiODAQSTphK7gb4ERgRVZJ Q0UugxywTTxFTS/SK7QyKTMATTNAODYuRVhFB7BPQzMABfBYPUEwNbAtkEIwRkYVsD1CD0BNNdE3 NhE1gEI4NcFDazbCNkBDNzJFNhA24kaFNbJGNsJIPTY0EXBkPTcqED0zDlArw0ICVTYQRVJTPTQz viwBQCvDC2AmkBfzPQlQoSvDRklMRTrQNjsl4SohPVVNQhugJEAdcHk8RUNCOtAw4DsWLiljVxfw A3AX8HYusGEBkHCZDeBkLizxMBBkOkBQvTWwMzFpArIryhvDdRhg9xrQBZAi0XQrq0KVJBAvgeEG AE9VTkQw4C6LK8PTLpIbEU9NGyBWLrAF4JcXwDTgMBBWMBBEOhfAc0IBMBBNOg9AR7gu13NfG9Ae UBURQk8KgEkfIHnvCGAscRTQG+BiHvMAcB6g/yLwAJAmkABwKQAgQAOgAMC/IMMXgCWRGJIrAQXA bR6g/kYJ0T7QF9ALgE8BHoBA8P5pAiAqUhiQTeUEYCaQFdD0cHAJcGMHMBcwKHEruhsXgABwawQg T3FhZHb7TyIrtE1A8BMgKpAG8CBQam8rumNW1UAdQAeALi0FoG0rtBQBAFmwAAMAEBAAAAAAAwAR EAAAAAALAAGACCAGAAAAAADAAAAAAAAARgAAAAADhQAAAAAAAAMAA4AIIAYAAAAAAMAAAAAAAABG AAAAABCFAAAAAAAAAwAHgAggBgAAAAAAwAAAAAAAAEYAAAAAUoUAADwYAAAeAAiACCAGAAAAAADA AAAAAAAARgAAAABUhQAAAQAAAAQAAAA4LjUACwAMgAggBgAAAAAAwAAAAAAAAEYAAAAABoUAAAAA AAADAA2ACCAGAAAAAADAAAAAAAAARgAAAAABhQAAAAAAAAsAFoAIIAYAAAAAAMAAAAAAAABGAAAA AA6FAAAAAAAAAwAXgAggBgAAAAAAwAAAAAAAAEYAAAAAEYUAAAAAAAADABmACCAGAAAAAADAAAAA AAAARgAAAAAYhQAAAAAAAB4AKIAIIAYAAAAAAMAAAAAAAABGAAAAADaFAAABAAAAAQAAAAAAAAAe ACmACCAGAAAAAADAAAAAAAAARgAAAAA3hQAAAQAAAAEAAAAAAAAAHgAqgAggBgAAAAAAwAAAAAAA AEYAAAAAOIUAAAEAAAABAAAAAAAAAAsAMoAIIAYAAAAAAMAAAAAAAABGAAAAAIKFAAABAAAACwA0 gAsgBgAAAAAAwAAAAAAAAEYAAAAAAIgAAAAAAAALADaACyAGAAAAAADAAAAAAAAARgAAAAAFiAAA AAAAAAIB+A8BAAAAEAAAAArjz3Ch2dIRl8Fwb03B/fcCAfoPAQAAABAAAAAK489wodnSEZfBcG9N wf33AgH7DwEAAABzAAAAAAAAADihuxAF5RAaobsIACsqVsIAAFBTVFBSWC5ETEwAAAAAAAAAAE5J VEH5v7gBAKoAN9luAAAAQzpcV0lORE9XU1xBcHBsaWNhdGlvbiBEYXRhXE1pY3Jvc29mdFxPdXRs b29rXG91dGxvb2sucHN0AAADAP4PBQAAAAMADTT9NwAAAgF/AAEAAAAxAAAAMDAwMDAwMDAwQUUz Q0Y3MEExRDlEMjExOTdDMTcwNkY0REMxRkRGN0U0OTIyMDAwAAAAABni ------=_NextPart_000_0002_01BF0F52.DA48C400-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 13:59:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 11C7C150A5 for ; Tue, 5 Oct 1999 13:59:28 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id QAA03477; Tue, 5 Oct 1999 16:50:22 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Tue, 5 Oct 1999 16:50:22 -0400 (EDT) From: Alex V P To: Tim Huffman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Preparing to install, AGP support?? In-Reply-To: <37FA48E6.C2B3DA6C@jorsm.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The only thing is to install mach64 drivers for X. i hope this will help ;-) i have rage pro and it's working fine ;-) alex On Tue, 5 Oct 1999, Tim Huffman wrote: > Hi, I am preparing to install FreeBSD version 3.3 release. I have a > question before I get into this, though. I was looking at the supported > configurations in the manual, and saw nothing about my video card. Could > anyone tell me if it is supported?? > I have an ATI Rage Pro on an 2X AGP bus. > Any help would be greatly appreciated, as I'm itching to install this! > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14: 9: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from wally.bellnetworks.net (www.bellnetworks.net [216.214.153.70]) by hub.freebsd.org (Postfix) with ESMTP id EEB2715654 for ; Tue, 5 Oct 1999 14:07:03 -0700 (PDT) (envelope-from jerry@wally.bellnetworks.net) Received: from localhost (jerry@localhost) by wally.bellnetworks.net (8.9.3/8.9.3) with ESMTP id RAA61544; Tue, 5 Oct 1999 17:06:26 -0400 (EDT) (envelope-from jerry@wally.bellnetworks.net) Date: Tue, 5 Oct 1999 17:06:26 -0400 (EDT) From: Jerry Bell To: Sabre Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Logging activity on a FreeBSD router/firewall... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Probably the best way is to install Squid (from the ports directory) and use the ACL's in Squid to limit which sites the users can go to. Once you have squid set up, configure IPFW to forward outbound port 80 connections back through Squid. (see http://www.bellnetworks.net/cs/showrec.php3?story_id=3 for an example of the IPFW configuration) Jerry On Tue, 5 Oct 1999, Sabre wrote: > Hey all, what programs are available on FBSD that will log what web sites > that my users go to? These users are not local on the machine, they are > on Win machines accessing the internet through a FBSD > router/gateway/firewall Any help is appriciated! > Sabre > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:10: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mc-qout4.whowhere.com (mc-qout4.whowhere.com [209.185.123.18]) by hub.freebsd.org (Postfix) with SMTP id 2308C15663 for ; Tue, 5 Oct 1999 14:09:27 -0700 (PDT) (envelope-from ifsmgr@my-deja.com) Received: from Unknown/Local ([?.?.?.?]) by my-deja.com; Tue Oct 5 14:07:30 1999 To: freebsd-questions@freebsd.org Date: Tue, 05 Oct 1999 14:07:30 -0700 From: " " Message-ID: Mime-Version: 1.0 Cc: X-Sent-Mail: off Reply-To: X-Mailer: MailCity Service Subject: Problem unsubscribing from mailing list X-Sender-Ip: 38.229.41.155 Organization: My Deja Email (http://www.my-deja.com:80) Content-Type: text/plain; charset=us-ascii Content-Length: 496 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I subscribed to some FreeBSD mailing lists a long time ago. Since then, changes were made to the FreeBSD lists mailing system, such that it doesn't accept mail from sites that do not do the reverse name lookup properly. Because of this I'm not able to control subscriptions through majordomo. What should I do? (No, I do not control our site DNS configuration.) Thank you, Stan --== Sent via Deja.com http://www.deja.com/ ==-- Share what you know. Learn what you don't. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:13:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id DC07615651 for ; Tue, 5 Oct 1999 14:13:34 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id OAA23858; Tue, 5 Oct 1999 14:32:20 -0700 (PDT) Date: Tue, 5 Oct 1999 14:32:20 -0700 (PDT) From: Alfred Perlstein To: Zhihui Zhang Cc: "Robert M. Luedtke" , freeBSD-questions@FreeBSD.ORG Subject: Re: install over networked computers In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Zhihui Zhang wrote: > > On Tue, 5 Oct 1999, Alfred Perlstein wrote: > > > > > On Tue, 5 Oct 1999, Zhihui Zhang wrote: > > > > > > > > On Tue, 5 Oct 1999, Alfred Perlstein wrote: > > > > > > > Export the cdrom via NFS and install over nfs, or provide > > > > ftp access to the mounted cdrom and do an ftp instal via specific > > > > URL. > > > > > > Is it possible to install from a cdrom image by using vnconfig, > > > mount_cd9660 and then NFS export it? I tried this today and failed. > > > > I don't see why not, perhaps you can explain where it failed? > > I made a mistake in my posting. I am sorry. I actually tried to install > from a filesystem /mnt into another partition on the same machine: > > # vnconfig /dev/vn0c /usr/cd_image/3.3-install.cd0 > # mount -t cd9660 /dev/vn0c /mnt > # /stand/sysinstall > > (I did not try to NFS export /mnt because on my client I get NFS Portmap > not registered error). you want to make sure you are running 'portmap' and 'mountd' in that order for NFS exports to work. > Inside /stand/sysinstall, I choose another partition. Everything looks OK > except that when I tries to boot from that partition, I got "invalid > partition". > > It seems to me that if you want to do a fresh installation or overwrite > everything, you should always boot from boot floppies or CD-ROM instead of > using /stand/sysinstall directly. Yah, I've found the binary install to be a bit difficult versus the makeworld or reinstall options. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:18:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from diarmadhi.mushhaven.net (cm-24-142-61-124.cableco-op.ispchannel.com [24.142.61.124]) by hub.freebsd.org (Postfix) with ESMTP id F367915651 for ; Tue, 5 Oct 1999 14:18:15 -0700 (PDT) (envelope-from mistwolf@diarmadhi.mushhaven.net) Received: (from mistwolf@localhost) by diarmadhi.mushhaven.net (8.9.3/8.9.3) id OAA92860 for freebsd-questions@freebsd.org; Tue, 5 Oct 1999 14:16:14 -0700 (PDT) (envelope-from mistwolf) Date: Tue, 5 Oct 1999 14:16:14 -0700 From: Jamie Norwood To: freebsd-questions@freebsd.org Subject: Tracking down causes of crashes Message-ID: <19991005141614.A92820@mushhaven.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG All, I am running (From uname -a): FreeBSD diarmadhi.mushhaven.net 3.2-STABLE FreeBSD 3.2-STABLE #2: Sun Aug 8 12:09:11 GMT 1999 root@:/usr/src/sys/compile/DIARMADHI i386 Now, I am running an Abit dual socket 370 mainboard with 2 Celeron 500 CPU's. All work fine under low load, but should I raise the load (Say by running Seti@Home, within 2 hours it just freezes up. Now, what I want to know is is there a web page or tutorial somewhere on debugging things like this? What can I look for to see what is causing it? Running either proc alone on the board with a non-SMP mainboard works fine, so it would seem to be something related to SMP... Help? Jamie To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:19:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sabre.dhs.org (rocky.ee.cua.edu [136.242.140.6]) by hub.freebsd.org (Postfix) with ESMTP id 2C3B915654 for ; Tue, 5 Oct 1999 14:19:18 -0700 (PDT) (envelope-from sabre@sabre.dhs.org) Received: from localhost (sabre@localhost) by sabre.dhs.org (8.9.3/8.9.3) with ESMTP id PAA02418; Tue, 5 Oct 1999 15:35:23 GMT (envelope-from sabre@sabre.dhs.org) Date: Tue, 5 Oct 1999 15:35:23 +0000 (GMT) From: Sabre To: Jerry Bell Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Logging activity on a FreeBSD router/firewall... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks ALOT for the link, it was a great one! I'm going to start implementing this stuff right now :) Sabre To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:25: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from almazs.pacex.net (almazs.pacex.net [204.1.219.156]) by hub.freebsd.org (Postfix) with ESMTP id 1EB9A14E32 for ; Tue, 5 Oct 1999 14:24:43 -0700 (PDT) (envelope-from danielb@almazs.pacex.net) Received: from localhost (danielb@localhost) by almazs.pacex.net (8.9.2/8.9.3) with SMTP id OAA00781 for ; Tue, 5 Oct 1999 14:23:44 -0700 (PDT) Date: Tue, 5 Oct 1999 14:23:44 -0700 (PDT) From: daniel B To: freebsd-questions@freebsd.org Subject: Upgraded to 3.3-STABLE fontpage passwd don't work Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi; I just upgraded my web server to 3.3-RELEASE and now all frontpage admin passwords don't work; I had everything running OK with 2.2.8-STABLE; i AM RUNNING APACHE 1.3.6 AND FRONTPAGE 2000 exts. Thanks Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:25:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 6220215664 for ; Tue, 5 Oct 1999 14:25:29 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id QAA99801; Tue, 5 Oct 1999 16:15:23 -0500 (CDT) (envelope-from dan) Date: Tue, 5 Oct 1999 16:15:22 -0500 From: Dan Nelson To: Jenkins.Mike@epamail.epa.gov Cc: ru@ucb.crimea.ua, questions@FreeBSD.ORG Subject: Re: ipfw and ports > 1023? Message-ID: <19991005161522.A99545@dan.emsphone.com> References: <85256801.006877BD.00@EPAHUB2.RTP.EPA.GOV> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <85256801.006877BD.00@EPAHUB2.RTP.EPA.GOV> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 05), Jenkins.Mike@epamail.epa.gov said: > >> How do you say "ports > 1023" in ipfw? I see the port-port syntax > >> but that is for a limited range of ports. > > Dan Nelson replied: > >port 1024-65535 > > Ruslan Ermilov replied with ipfw(8) and: > >So, we say "1024-". > > My second sentence in the original post hinted about this but ... In > the ipfw(8) manual page it says: > > "A range may only be specified as the first value, and the length > of the port list is limited to IP_FW_MAX_PORTS (as defined in > /usr/src/sys/netinet/ip_fw.h) ports." > > IP_FW_MAX_PORTS is 10 so the maximum number of ports listed is 10. So > 20-29 would be ok (and so would 20-24,50,60,70,80,90) but 1024-65535 > is NOT ok and probably results in 1024-1033. I think the intent is > to allow a small number of ports on a single rule rather than having > multiple rules. Eg: The ports are stored internally as an array of 10 numbers; if the IP_FW_F_SRNG flag is set for the rule, the first two ports in the array are interpreted as a range. So you can have a range and it can be as wide as you like, but it must be specified first in the port list, and you can only have one range per rule. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:25:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id EBDAF1567D for ; Tue, 5 Oct 1999 14:25:38 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id QAA99801; Tue, 5 Oct 1999 16:15:23 -0500 (CDT) (envelope-from dan) Date: Tue, 5 Oct 1999 16:15:22 -0500 From: Dan Nelson To: Jenkins.Mike@epamail.epa.gov Cc: ru@ucb.crimea.ua, questions@FreeBSD.ORG Subject: Re: ipfw and ports > 1023? Message-ID: <19991005161522.A99545@dan.emsphone.com> References: <85256801.006877BD.00@EPAHUB2.RTP.EPA.GOV> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <85256801.006877BD.00@EPAHUB2.RTP.EPA.GOV> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 05), Jenkins.Mike@epamail.epa.gov said: > >> How do you say "ports > 1023" in ipfw? I see the port-port syntax > >> but that is for a limited range of ports. > > Dan Nelson replied: > >port 1024-65535 > > Ruslan Ermilov replied with ipfw(8) and: > >So, we say "1024-". > > My second sentence in the original post hinted about this but ... In > the ipfw(8) manual page it says: > > "A range may only be specified as the first value, and the length > of the port list is limited to IP_FW_MAX_PORTS (as defined in > /usr/src/sys/netinet/ip_fw.h) ports." > > IP_FW_MAX_PORTS is 10 so the maximum number of ports listed is 10. So > 20-29 would be ok (and so would 20-24,50,60,70,80,90) but 1024-65535 > is NOT ok and probably results in 1024-1033. I think the intent is > to allow a small number of ports on a single rule rather than having > multiple rules. Eg: The ports are stored internally as an array of 10 numbers; if the IP_FW_F_SRNG flag is set for the rule, the first two ports in the array are interpreted as a range. So you can have a range and it can be as wide as you like, but it must be specified first in the port list, and you can only have one range per rule. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:39:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp04.wxs.nl (smtp04.wxs.nl [195.121.6.59]) by hub.freebsd.org (Postfix) with ESMTP id CC98E14C82 for ; Tue, 5 Oct 1999 14:39:47 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.239]) by smtp04.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAC5A99; Tue, 5 Oct 1999 23:39:45 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id XAA08826; Tue, 5 Oct 1999 23:34:01 +0200 (CEST) (envelope-from asmodai) Date: Tue, 5 Oct 1999 23:34:01 +0200 From: Jeroen Ruigrok/Asmodai To: Zhihui Zhang Cc: Doug , freebsd-questions@FreeBSD.ORG Subject: Re: Install FreeBSD from another machine Message-ID: <19991005233401.B8199@daemon.ninth-circle.org> References: <19991003235431.E35757@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991005 23:27], Zhihui Zhang (zzhang@cs.binghamton.edu) wrote: > >(1) Download CD image into /usr/cd_image/3.3-install.cd0 > >(2) vnconfig /dev/vn0 /usr/cd_image/3.3-install.cd0 > >(3) mount -t cd9660 /dev/vn0 /mnt > >Can I use /mnt to replace the normal /cdrom which corresponds to the >actual CD-ROM not just a CD image? If so, there is no need to use a CD-ROM >as long as I keep the image on the hard disk. For all I know: yes. You could also of course mkdir /install And mount it on there, thus freeing /mnt again. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Money is like an arm or a leg - Use it, or lose it. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:47:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 651CE14E77 for ; Tue, 5 Oct 1999 14:47:05 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 28515 invoked from network); 5 Oct 1999 21:47:03 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.119.230) by cask.force9.net with SMTP; 5 Oct 1999 21:47:03 -0000 Message-ID: <37FA71C4.941239AF@sinclairassoc.force9.co.uk> Date: Tue, 05 Oct 1999 22:46:44 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: Jeroen Ruigrok/Asmodai Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: NSLINT and DNS configuration References: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> <19991004000040.F35757@daemon.ninth-circle.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jeroen, Many thanks for your reply. Yes DNS was not properly configured. I had used the outline from Chapter 4 in the DNS/BIND book and made a couple of errors. However, my final configuration differs from yours in that I already had a zone for 0.0.127.in-addr.arpa which referenced the file db127.0.0 db.127.0.0 contained: @ IN SOA sparky.at.home. root.sparky.at.home. ( ) IN NS sparky.at.home 1 In PTR localhost. ^ I also ran h2n which also gave 'localhost.' for the pointer, so I assumed this was correct. ^ (However h2n can only pick up what's in the /etc/hosts file, so this must have been wrong as well.)  I changed it to localhost (ie, 'localhost.at.home.') and nslint no longer reported any errors. Your solution interests me. If I had created an additional master zone for 1.0.0.127.in-addr.arpa it would presumably have overlapped the existing zone for 0.0.127.etc.etc and created a duplicate. I don't know if this would still have been OK, but it's the first time I've seen an example of a zone created specifically for a single address; ie, 1.0.0.127 as opposed to 0.0.127. Is this common? Jeroen Ruigrok/Asmodai wrote: > > On [19991003 14:41], Richard Morte (ric@sinclairassoc.force9.co.uk) wrote: > >Has anyone used nslint to check the dns configuration? I just used it > >and it reports the following: > > > > missing address A localhost. -> 127.0.0.1 > > missing pointer PTR localhost.at.home -> 127.0.0.1 > > 127.0.0.1 in use by localhost.at.home & localhost. > > Had this before. Definately a configuration error. > > named.conf: > > zone "1.0.0.127.IN-ADDR.ARPA" { > type master; > file "db.127.0.0.1"; > }; > > db.127.0.0.1: > > 1 IN PTR localhost.blah.org. ^^^^^^^^^^ (see my comments, above) > > db.blah.org: > > localhost IN A 127.0.0.1 ^^^^^^^^^ I also got confused here. I think I was trying to force DNS to be able to answer a query on 'localhost' as well as 'localhost.at.home', so I had two entries, one for each. I think this explains the final '127.0.0.1 in use by localhost.at.home & localhost.' message reported by nslint. > > [blah.org is fictional and only used for the example] > > >I have checked the configuration and localhost does seem to be clearly > >mapped to 127.0.0.1 and vice-versa. This seems to be confirmed by the > >final line of nslint's output. > > > >Are these "errors" due to nslint's inability to find it's way through > >the config files ( I shouldn't trust nslint's output) or has it found > >something I should investigate further (nslint is good and I've clearly > >got it wrong)? > > nslint is 99% of the time correct. Remember, computer lexers and parsers > interpret configurations aimed for computers better than humans ;) Yes, ah, yes. So many hours trying to do it manually, so little progress... Jeroen, I'm shortly to set up Apache for a local intranet using named virtual hosts. (Did it once before for FreeBSD 3.0, but never needed to use DNS). I can foresee a problem round the corner... The intranet will use the pn0 interface which is already (physically) mapped to the IP address 192.168.120.1. I can do an ifconfig to create an alias on this address, say 192.168.120.100 for Apache's use. From the perspective of DNS, will this simple be a case of adding the appropriate A and PTR records or is there something else I ought to be thinking about? By all means change the thread if you want. Many thanks, once again. Ric > > HTH, > > -- > Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl > The BSD Programmer's Documentation Project > Network/Security Specialist BSD: Technical excellence at its best > Fame is the perfume of heroic deeds. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 14:52: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fwnau040.usco.com (fwnau040.usco.com [207.92.15.79]) by hub.freebsd.org (Postfix) with ESMTP id 7B9E214CFB for ; Tue, 5 Oct 1999 14:51:50 -0700 (PDT) (envelope-from bLiotta@USCO.com) Received: from ntnau210.usco.com (ntnau210.usco.com [172.16.66.43]) by fwnau040.usco.com (8.9.1/8.8.5) with ESMTP id RAA06393 for ; Tue, 5 Oct 1999 17:51:17 -0400 (EDT) Received: by ntnau210.usco.com with Internet Mail Service (5.0.1458.49) id <4JJD4FW7>; Tue, 5 Oct 1999 17:51:15 -0400 Message-ID: From: "Liotta, Bob" To: "'questions@freebsd.org'" Subject: Staroffice Date: Tue, 5 Oct 1999 17:51:13 -0400 X-Priority: 3 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.0.1458.49) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Good afternoon, Has anyone successfully installed Sun's Staroffice(Linux Version) on FreeBSD 3.2 If you have, could you drop me some hints? I am getting stuck on setup. Lib problems. I think I installed all of the Linux stuff. Other linux stuff works. Any help would be appreciated. Thanks. Bob To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15: 0: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id C5664152EB for ; Tue, 5 Oct 1999 14:59:56 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from localhost (doug@localhost) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id OAA46058; Tue, 5 Oct 1999 14:58:23 -0700 (PDT) (envelope-from Doug@gorean.org) Date: Tue, 5 Oct 1999 14:58:23 -0700 (PDT) From: Doug X-Sender: doug@dt011n66.san.rr.com To: Mark Ovens Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-Release - problem with PATH? In-Reply-To: <19991005201206.D315@marder-1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Mark Ovens wrote: > I just wonder why ``make install'' doesn't run rehash as the last > thing it does Because we want to encourage people to use real shells instead? Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15: 5:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from logisticsoftware.co.nz (logisticsoftware.co.nz [202.37.163.1]) by hub.freebsd.org (Postfix) with ESMTP id 6FC4A15344 for ; Tue, 5 Oct 1999 15:04:30 -0700 (PDT) (envelope-from jonc@logisticsoftware.co.nz) Received: (from jonc@localhost) by logisticsoftware.co.nz (8.9.3/8.9.3) id KAA08740; Wed, 6 Oct 1999 10:59:40 +1300 (NZDT) Date: Wed, 6 Oct 1999 10:59:40 +1300 (NZDT) From: Jonathan Chen To: Mark Ovens Cc: chris@tourneyland.com, freebsd-questions@FreeBSD.ORG Subject: Re: 3.3-Release - problem with PATH? In-Reply-To: <19991005201206.D315@marder-1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Mark Ovens wrote: > I just wonder why ``make install'' doesn't run rehash as the last > thing it does (after testing the shell it's running in, if it only > applies to csh(1)) That's 'cos it would run in a sub-process, whereas "rehash" is internal to the shell's process. ie child wouldn't affect the calling process. Jonathan Chen ------------------------------------------------------------------------ Do not take life too seriously. You will never get out of it alive. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15: 5:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 0E8711566E for ; Tue, 5 Oct 1999 15:05:01 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 6547 invoked from network); 5 Oct 1999 22:03:47 -0000 Received: from userac03.uk.uudial.com (HELO marder-1.) (62.188.130.201) by smtp.dial.pipex.com with SMTP; 5 Oct 1999 22:03:47 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id XAA04110; Tue, 5 Oct 1999 23:03:44 +0100 (BST) (envelope-from mark) Date: Tue, 5 Oct 1999 23:03:44 +0100 From: Mark Ovens To: Doug Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-Release - problem with PATH? Message-ID: <19991005230343.A3982@marder-1> References: <19991005201206.D315@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 02:58:23PM -0700, Doug wrote: > On Tue, 5 Oct 1999, Mark Ovens wrote: > > > I just wonder why ``make install'' doesn't run rehash as the last > > thing it does > > > Because we want to encourage people to use real shells instead? > > Now don't start *that* again ;-) > Doug > -- > "Stop it, I'm gettin' misty." > > - Mel Gibson as Porter, "Payback" > -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15: 9:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rdc2.on.home.com (ha1.rdc2.on.home.com [24.9.0.15]) by hub.freebsd.org (Postfix) with ESMTP id EF45A1566E for ; Tue, 5 Oct 1999 15:07:39 -0700 (PDT) (envelope-from street@iname.com) Received: from mired.eh.local ([24.64.136.188]) by mail.rdc2.on.home.com (InterMail v4.01.01.07 201-229-111-110) with ESMTP id <19991005220738.IJTA5795.mail.rdc2.on.home.com@mired.eh.local>; Tue, 5 Oct 1999 15:07:38 -0700 Received: (from kws@localhost) by mired.eh.local (8.9.3/8.9.3) id SAA40666; Tue, 5 Oct 1999 18:07:37 -0400 (EDT) (envelope-from kws) To: Jenkins.Mike@epamail.epa.gov Cc: dnelson@emsphone.com, ru@ucb.crimea.ua, questions@FreeBSD.ORG Subject: Re: ipfw and ports > 1023? References: <85256801.006877BD.00@EPAHUB2.RTP.EPA.GOV> From: Kevin Street Date: 05 Oct 1999 18:07:37 -0400 In-Reply-To: Jenkins.Mike@epamail.epa.gov's message of "Tue, 05 Oct 1999 14:06:10 -0500" Message-ID: <871zb91mxi.fsf@mired.eh.local> Lines: 25 X-Mailer: Gnus v5.6.45/XEmacs 21.1 - "20 Minutes to Nikko" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jenkins.Mike@epamail.epa.gov writes: > My second sentence in the original post hinted about this but ... > In the ipfw(8) manual page it says: > > "A range may only be specified as the first value, and the length > of the port list is limited to IP_FW_MAX_PORTS (as defined > in /usr/src/sys/netinet/ip_fw.h) ports." > > IP_FW_MAX_PORTS is 10 so the maximum number of ports listed is 10. > So 20-29 would be ok (and so would 20-24,50,60,70,80,90) but 1024-65535 > is NOT ok and probably results in 1024-1033. Did you try it? It does not do this. 1024-65535 works. IP_FW_MAX_PORTS only affects the number of things you can specify on the ipfw command line, not the size of the range. >I think the intent is to allow a small number > of ports on a single rule rather than having multiple rules. Eg: right -- Kevin Street street@iname.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:13:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 0E5E5151DA for ; Tue, 5 Oct 1999 15:13:08 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from localhost (doug@localhost) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id PAA46082; Tue, 5 Oct 1999 15:11:15 -0700 (PDT) (envelope-from Doug@gorean.org) Date: Tue, 5 Oct 1999 15:11:14 -0700 (PDT) From: Doug X-Sender: doug@dt011n66.san.rr.com To: Phillip Ryker Cc: freebsd-questions@freebsd.org Subject: Re: Upgrading from 2.2.8 -STABLE to 3.3 -STABLE In-Reply-To: <37FA070D.6906F504@skynetweb.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Phillip Ryker wrote: > Is there a tutorial available on the process of upgrading from 2.2.8 to > the latest 3.3 branch?? If so could someone please kindly send me the > URL? http://freebsd.simplenet.com/make-upgrade.html Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:21:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.multinet-media.com (ns1.multinet-media.com [207.18.212.40]) by hub.freebsd.org (Postfix) with ESMTP id AA94015649 for ; Tue, 5 Oct 1999 15:21:49 -0700 (PDT) (envelope-from drew@multinet-media.com) Received: from multinet-media.com (231door249.door.net [208.234.231.249]) by ns1.multinet-media.com (8.8.8/8.8.8) with ESMTP id WAA03363; Tue, 5 Oct 1999 22:15:48 -0500 (CDT) (envelope-from drew@multinet-media.com) Message-ID: <37FA2339.B85F37D@multinet-media.com> Date: Tue, 05 Oct 1999 17:11:37 +0100 From: Drew Wiggins Organization: MultiNetMedia X-Mailer: Mozilla 4.61 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: Juan Luis montes Ruiz Cc: freebsd-questions@FreeBSD.ORG Subject: Re: no se como suscribirme a la lista de correo References: <3.0.5.32.19991005010421.007bde00@acnet.net> Content-Type: multipart/mixed; boundary="------------6478DB33C19AD8DDFC8E8A7D" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. --------------6478DB33C19AD8DDFC8E8A7D Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bueno, Deja el subjeto vacio. Ponga la nombre de la lista que quieres siguiendo la palabara 'subscribe.' subscribe freebsd-questions -o- subscribe freebsd-hackers Si quisieras usar otra email para recibir mensajes...la incluya al fin. subscribe freebsd-questions juanluis@acnet.net -dw Juan Luis montes Ruiz wrote: > Hola > > he tratado de suscribirme a la lista de correo perono he podido. > porfavor digame quee s lo que devo de poner en el correo para que me suscriba > > siempre me manda este error: > > >>>> subscribe > **** subscribe: unknown list ''. > >>>> Atte. > **** Command 'atte.' not recognized. > >>>> Juan Luis Montes > **** Command 'juan' not recognized. > >>>> Nodo Tapachula > **** Command 'nodo' not recognized. > **** Help for Majordomo@es.freebsd.org: > > This help message is being sent to you from the Majordomo mailing list > management system at Majordomo@es.freebsd.org. > > This is version 1.94.4 of Majordomo. > > If you're familiar with mail servers, an advanced user's summary of > Majordomo's commands appears at the end of this message. > > Majordomo is an automated system which allows users to subscribe > and unsubscribe to mailing lists, and to retrieve files from list > archives. > > You can interact with the Majordomo software by sending it commands > in the body of mail messages addressed to "Majordomo@es.freebsd.org". > Please do not put your commands on the subject line; Majordomo does > not process commands in the subject line. > > You may put multiple Majordomo commands in the same mail message. > Put each command on a line by itself. > > Atte. > Juan Luis Montes > Nodo Tapachula > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message --------------6478DB33C19AD8DDFC8E8A7D Content-Type: text/x-vcard; charset=us-ascii; name="drew.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Drew Wiggins Content-Disposition: attachment; filename="drew.vcf" begin:vcard n:Wiggins;John tel;cell:(806) 786-2764 tel;fax:(806) 472-0858 tel;home:(806) 786-2764 tel;work:(806) 791-9993 x-mozilla-html:TRUE url:http://www.MultiNet-Media.com/ org:MultiNetMedia;Operations version:2.1 email;internet:drew@multinet-media.com title:IT Director adr;quoted-printable:;;1316 27th Street=0D=0A;Lubbock;TX ;79405;USA x-mozilla-cpt:;15408 fn:Drew Wiggins end:vcard --------------6478DB33C19AD8DDFC8E8A7D-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:25:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 640141530F for ; Tue, 5 Oct 1999 15:25:21 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 322 invoked from network); 5 Oct 1999 22:22:44 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.123.74) by cask.force9.net with SMTP; 5 Oct 1999 22:22:44 -0000 Message-ID: <37FA7A44.9290918B@sinclairassoc.force9.co.uk> Date: Tue, 05 Oct 1999 23:23:00 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: Brian Somers Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: ppp -auto is trigger-happy References: <199910041526.QAA02841@hak.lan.Awfulhak.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Brian Somers wrote: > > > On Wed, Sep 29, 1999 at 09:25:48AM +1200, Jonathan Chen wrote: > > > On Tue, 28 Sep 1999, Richard Morte wrote: > > > > > > > Hi, > > > > > > > > Can anyone help explain why ppp in -auto -alias mode dials out as soon > > > > as I click in the location field in Netscape? Do I need to set up IP > > > > filtering? Without some sort of filtering or additional configuration I > > > > don't seem to be able to browse documents on the local machine without > > > > accessing the modem. > > > > > > Netscape does a DNS lookup the very first chance it gets. This will > > > cause a dialout, unless you've blocked DNS from activating a callout. > > > > > I'm having the same problems. In fact, even starting the enlightenment config program causes ppp -auto to dial up. Same thing when sending mail from within mutt. Even though I have told sendmail to queue messages (sendmail -0 DeliveryMode=d -O HoldExpensive). Actually what it does is dial up, then stick them in the queue without delivering them. I assume that these are also caused because of DNS lookups. > > > > > > So anyway, I'd really like to be disable DNS lookups from causing ppp -auto to dial. How can I do this? I assume that I want to re-enable DNS in ppp.linkup. > > > > Thanks a ton, > > Tiller > > You may want to stick your hostname in /etc/hosts - blocking DNS is > probably the wrong way to go as it'll make on-demand dialing > practically useless. > > Look into ``ndc'' to find out what's being looked up and put this > stuff in /etc/hosts if you can :-) > -- > Brian > > Don't _EVER_ lose your sense of humour ! > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Brian, Thanks for your reply. I'm not at all familiar with ndc's output so I guess you are referring to the stuff output by dumpdb - only there's so much of it. However, I've been running named with the -d1 flag and this seems to pick up all the requests in named.run. When Netscape was first installed, it reported that it couldn't find the host for 'home. netscape.com' (or something like this). I assume Netscape is configured to 'phone home, if only for the Netscape server to set a cookie... I cannot detect any current dns lookups for netscape.com. However, the following lookups are made when Netscape starts up now (output from named.run): news.force9.net usenet.force9.net usenet.plus.net.uk mail.force9.net relay.force9.net These are all for Messenger. They are produced as soon as the browser alone starts up (without even starting Mesenger). Since my ISP provides server-assigned addresses I am not sure I can put any of this stuff in /etc/hosts because the IP addresses change with each new connection. What do you suggest/ many Thanks, Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:26:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (Postfix) with ESMTP id AF8EC156B2 for ; Tue, 5 Oct 1999 15:26:22 -0700 (PDT) (envelope-from ChrisMic@clientlogic.com) Received: by site0s1 with Internet Mail Service (5.5.2448.0) id <4CMXCDAZ>; Tue, 5 Oct 1999 18:25:52 -0400 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CCB@site2s1> From: Christopher Michaels To: 'Note' Cc: "FreeBSD Questions (E-mail)" Subject: RE: Internal PnP modem Date: Tue, 5 Oct 1999 18:28:55 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG yes. you would need to configure it with the userconfig (boot -c on startup). Take a look through the mailing list archives for detailed information, that has been covered before. -Chris p.s. please don't send HTML e-mails to the list. > -----Original Message----- > From: Note [SMTP:note@tatooine.loxinfo.co.th] > Sent: Tuesday, October 05, 1999 7:22 AM > To: freebsd-questions@freebsd.org > Subject: Internal PnP modem > > I have an Internal Modem Supra Express 336 SPi. Can I use it with FreeBSD. > If so, how to? Thanks. > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:26:47 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id E2786156B8 for ; Tue, 5 Oct 1999 15:26:29 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11Yd2S-000HDm-00; Tue, 5 Oct 1999 23:26:28 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id XAA25480 for ; Tue, 5 Oct 1999 23:26:28 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Tue, 5 Oct 1999 23:26:28 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: AbiWord font problem Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The readme says to add the font path in my XF86Config. But when i do that, X won't load. It says it can't find the Unix font path. I double checked my typing, and it is correct. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:30:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (Postfix) with ESMTP id E992E153E8 for ; Tue, 5 Oct 1999 15:30:44 -0700 (PDT) (envelope-from ChrisMic@clientlogic.com) Received: by site0s1 with Internet Mail Service (5.5.2448.0) id <4CMXCDC1>; Tue, 5 Oct 1999 18:29:07 -0400 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CCC@site2s1> From: Christopher Michaels To: "'tbrock@mail.phoenix.net'" Cc: "FreeBSD Questions (E-mail)" Subject: RE: KDE themes Date: Tue, 5 Oct 1999 18:32:09 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Tony, I don't know exactly how much it would help you in this situation, but pkg_version is a useful utility when it works. I have several ports (such as bash and XFree) where it never knows what version is installed. But it does appear to be 90% accurate. -Chris P.S. What's the difference between 'make install' and 'make reinstall' > -----Original Message----- > From: Tony [SMTP:tbrock@mail.phoenix.net] > Sent: Monday, October 04, 1999 9:21 AM > To: ChrisMic@clientlogic.com; freebsd-questions@freebsd.org > Subject: RE: KDE themes > > On Thu, 30 Sep 1999, you wrote: > > Folks, > > Every seems to be sidestepping the solution. Install KDE 1.1.2, which > is in > > the current ports collection and that does have the theme manager. > > > > -Chris > > I'd like to add a little insight on installing the 1.1.2 port. This > actually > applies to ALL ports if you maintain an older system. > I've found that you can avoid many headaches if you reinstall every port > dependancy when dealing with window managers. It seems to me that we need > better version control in the dependancy tree. Just because a > /var/db/pkg/portname says it is installed doesn't necessarily mean the > correct > version is really there. Find the dependent libraries and api's in > /usr/ports > (graphics and x11), make deinstall and make reinstall those suckers if you > have > any problems. I even went so far as to reinstall dependencies of those > such as > libtool and gettext just to get a few of these libraries to compile > correctly. > This is on a cvsup'ed 3.3-R/ports machine and I've seen problems like this > for a long time. > If there is some utility to help avoid these situations I've not yet run > across > it. > > Tony > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:39:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from inet03.citec.qld.gov.au (inet03.citec.qld.gov.au [203.5.10.10]) by hub.freebsd.org (Postfix) with ESMTP id 4655D15689 for ; Tue, 5 Oct 1999 15:39:05 -0700 (PDT) (envelope-from sgcccdc@citec.qld.gov.au) Received: by inet03.citec.qld.gov.au; id IAA04616; Wed, 6 Oct 1999 08:38:35 +1000 (EST) Received: from guru.citec.qld.gov.au( 147.132.20.47) by inet03.citec.qld.gov.au via smap (V2.0) id xma004388; Wed, 6 Oct 99 08:38:21 +1000 Received: from localhost (sgcccdc@localhost) by guru.citec.qld.gov.au (8.8.5/8.8.5) with SMTP id IAA16766 for ; Wed, 6 Oct 1999 08:38:23 +1000 X-Authentication-Warning: guru.citec.qld.gov.au: sgcccdc owned process doing -bs Date: Wed, 6 Oct 1999 08:38:23 +1000 (EST) From: Colin Campbell To: freebsd-questions@freebsd.org Subject: freebsd v bsdi v linux Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Had an interesting installtion problem that has just been solved. Machine is a PIII 450 with 512MB (4x128)RAM. During installation of 3.2 from the WC CD I'd get a wite failure or a panic of the machine or both. With 3.3 using NFS I just got a machine panic. These always happened during the bin dist unpacking. I tried RedHat 6.0 and the system panicked half way through the installation. The machine came with BSDI 3.1 on it. When I booted it for the first time I noticed that the system was reporting only 128MB RAM. Just BSDI weirdness I thought. Despite the repeated FreeBSD and Linux failures I was always able to install BSDI, but the system always reported 128MB RAM. Nothing dawned on me from this. Anyway, I started pulling DIMMs from the box. With only slot 1 occupied FreeBSD installed no problems. I pulled that DIMM and put two others in. No problems. Added the first one to give 384MB, no problems. Put the untested DIMM in and the machine wouldn't even boot! Hmm bad memory! To test a theory I then installed BSDI 3.1 again. Interestingly it now reported 384MB RAM. This now leads me to my question: What is BSDI doing that made it recognise the bad memory in slot 2, and hence only work with the first 128MB, that Linux and more importantly FreeBSD are NOT doing? Anyone think it's a useful enough feature to be added to the system? It measn that if you think you have xMB and the OS comes up with yMB you might have a problem. Colin -- Colin Campbell Unix Support/Postmaster/Hostmaster CITEC +61 7 3227 7112 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:50:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 8CCDD15689 for ; Tue, 5 Oct 1999 15:50:11 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from localhost (doug@localhost) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id PAA46604; Tue, 5 Oct 1999 15:47:12 -0700 (PDT) (envelope-from Doug@gorean.org) Date: Tue, 5 Oct 1999 15:47:12 -0700 (PDT) From: Doug X-Sender: doug@dt011n66.san.rr.com To: Drew C Morone Cc: freebsd-questions@freebsd.org Subject: Re: syslogd questions In-Reply-To: <199910051703.NAA28277@j51.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Drew C Morone wrote: > What can I do to get ipfw from logging to /var/log/messages? > I have added > !ipfw > *.* /var/log/ipfw > > but now it logs to both files. Have you tried what the syslog.conf man page talks about inre the .none facility? Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:51:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from implode.root.com (root.com [209.102.106.178]) by hub.freebsd.org (Postfix) with ESMTP id 518E815698 for ; Tue, 5 Oct 1999 15:51:15 -0700 (PDT) (envelope-from dg@implode.root.com) Received: from implode.root.com (localhost [127.0.0.1]) by implode.root.com (8.8.8/8.8.5) with ESMTP id PAA00656; Tue, 5 Oct 1999 15:51:49 -0700 (PDT) Message-Id: <199910052251.PAA00656@implode.root.com> To: Colin Campbell Cc: freebsd-questions@FreeBSD.ORG Subject: Re: freebsd v bsdi v linux In-reply-to: Your message of "Wed, 06 Oct 1999 08:38:23 +1000." From: David Greenman Reply-To: dg@root.com Date: Tue, 05 Oct 1999 15:51:49 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >Had an interesting installtion problem that has just been solved. > >Machine is a PIII 450 with 512MB (4x128)RAM. During installation of 3.2 >from the WC CD I'd get a wite failure or a panic of the machine or both. >With 3.3 using NFS I just got a machine panic. These always happened >during the bin dist unpacking. > >I tried RedHat 6.0 and the system panicked half way through the >installation. > >The machine came with BSDI 3.1 on it. When I booted it for the first time >I noticed that the system was reporting only 128MB RAM. Just BSDI >weirdness I thought. Despite the repeated FreeBSD and Linux failures I was >always able to install BSDI, but the system always reported 128MB RAM. >Nothing dawned on me from this. > >Anyway, I started pulling DIMMs from the box. With only slot 1 occupied >FreeBSD installed no problems. I pulled that DIMM and put two others in. >No problems. Added the first one to give 384MB, no problems. Put the >untested DIMM in and the machine wouldn't even boot! Hmm bad memory! > >To test a theory I then installed BSDI 3.1 again. Interestingly it now >reported 384MB RAM. This now leads me to my question: > >What is BSDI doing that made it recognise the bad memory in slot 2, and >hence only work with the first 128MB, that Linux and more importantly >FreeBSD are NOT doing? Anyone think it's a useful enough feature to be >added to the system? It measn that if you think you have xMB and the OS >comes up with yMB you might have a problem. FreeBSD does do a simple validation of memory during the bootup and has caught problems in the past like you've described. BSDI is apparantly just using a pattern that tickles your memory problem where FreeBSD's does not. -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project - http://www.freebsd.org Creator of high-performance Internet servers - http://www.terasolutions.com Pave the road of life with opportunities. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 15:58:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from condor.mccue.com (condor.mccue.com [204.30.211.3]) by hub.freebsd.org (Postfix) with ESMTP id 60CB9156B6 for ; Tue, 5 Oct 1999 15:58:04 -0700 (PDT) (envelope-from dougf@mccue.com) Received: from mccue.com (mccue229.mccue.com [204.30.211.229]) by condor.mccue.com (8.8.8/8.8.8) with ESMTP id PAA12692 for ; Tue, 5 Oct 1999 15:56:07 -0700 (PDT) Message-ID: <37FA827C.56699E7A@mccue.com> Date: Tue, 05 Oct 1999 15:58:04 -0700 From: Douglas Flock Organization: McCue Systems Inc. X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: SU command Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Folks, I am getting an error using the SU command: Oct 2 06:08:38 myname SU: BAD SU dougf to root on /dev/ttyE0 I have user as member of group Wheel, as required. What am I missing? Is something corrupted? E-mail: dougf@mccue.com Thanks, Doug To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 16:11: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id C5CE8156CD for ; Tue, 5 Oct 1999 16:10:25 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id IAA66321; Wed, 6 Oct 1999 08:39:20 +0930 (CST) Date: Wed, 6 Oct 1999 08:39:20 +0930 From: Greg Lehey To: Ilia Chipitsine Cc: Marc Schneiders , Kent Stewart , Oleg Ogurok , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release Message-ID: <19991006083920.I40186@freebie.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: ; from Ilia Chipitsine on Tue, Oct 05, 1999 at 08:06:08AM +0600 WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tuesday, 5 October 1999 at 8:06:08 +0600, Ilia Chipitsine wrote: > -----BEGIN PGP SIGNED MESSAGE----- > > On Mon, 4 Oct 1999, Marc Schneiders wrote: > >>> I have a spare system, which is exactly Intel 386DX-33 (overclocked to >>> 40MHz) with 4Mb of RAM. I'd happy to built a system which will work >>> 24-hours only as E-mail/new/FIDO gateway. Perfomance _is_ acceptable. I >>> have a 28.8K modem for dialing out. My experience proves that 386DX-40 >>> can handle 4 x 115200 NUL-modems + 10Mb Ethernet (well, it was Linux >>> RH-5.0 boxen running as IPX <-> IP <-> IPX gateway). >>> >>> I think that my 386 boxen will stay without any use ... >>> Anybody knows, is it possible to install NetBSD/OpenBSD on 4Mb of RAM ?! >>> >> [...] >> >> It isn't possible :-( Our only relief is 2.1.7.1. That works and installs >> ok on 4 MB. > > so, 2.1.7.1 is the greatest one. where can I download it ? I don't think you can. > if it is not supported anymore, why ? Because it's obsolete. If you *really* need to do this, rather than running PicoBSD, for example, you can always get it from the repository. Greg -- See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 16:28:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id DF7C3156AB for ; Tue, 5 Oct 1999 16:28:12 -0700 (PDT) (envelope-from marc@oldserver.demon.nl) Received: from [212.238.105.241] (helo=propro) by post.mail.nl.demon.net with esmtp (Exim 2.02 #1) id 11Ydwt-0003rn-00; Tue, 5 Oct 1999 23:24:48 +0000 Date: Wed, 6 Oct 1999 01:24:47 +0200 (CEST) From: Marc Schneiders To: Ilia Chipitsine Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Ilia Chipitsine wrote: > On Mon, 4 Oct 1999, Marc Schneiders wrote: > > > > I have a spare system, which is exactly Intel 386DX-33 (overclocked to > > > 40MHz) with 4Mb of RAM. I'd happy to built a system which will work > > > 24-hours only as E-mail/new/FIDO gateway. Perfomance _is_ acceptable. I > > > have a 28.8K modem for dialing out. My experience proves that 386DX-40 > > > can handle 4 x 115200 NUL-modems + 10Mb Ethernet (well, it was Linux > > > RH-5.0 boxen running as IPX <-> IP <-> IPX gateway). > > > > > > I think that my 386 boxen will stay without any use ... > > > Anybody knows, is it possible to install NetBSD/OpenBSD on 4Mb of RAM ?! > > > > > [...] > > > > It isn't possible :-( Our only relief is 2.1.7.1. That works and installs > > ok on 4 MB. > > so, 2.1.7.1 is the greatest one. where can I download it ? > if it is not supported anymore, why ? > I got it from the German mirror a few months ago. Including packages! Supported? I suppose we may ask about it here. -- Marc Schneiders || || marc@venster.nl || Null message body; marc@oldserver.demon.nl || hope that's ok To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 16:28:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rknebel.uplink.net (rknebel.uplink.net [209.173.88.243]) by hub.freebsd.org (Postfix) with ESMTP id 435021569E for ; Tue, 5 Oct 1999 16:28:23 -0700 (PDT) (envelope-from rknebel@uplink.net) Received: from rknebel.uplink.net (rknebel [209.173.88.243]) by rknebel.uplink.net (8.9.3/8.9.3) with SMTP id TAA04157 for ; Tue, 5 Oct 1999 19:24:57 -0400 (EDT) (envelope-from rknebel@uplink.net) From: Rick Knebel Reply-To: rknebel@uplink.net To: questions@freebsd.org Subject: hpfs file system Date: Tue, 5 Oct 1999 19:23:41 -0400 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100519245700.03245@rknebel.uplink.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have a zip disk formatted in the hpfs file system from OS2 Warp. Is there a way to access this under linux? Thanks Rick -- Rick Knebel rknebel@uplink.net http://rknebel.uplink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 16:53:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20]) by hub.freebsd.org (Postfix) with ESMTP id E68FE156B7 for ; Tue, 5 Oct 1999 16:52:33 -0700 (PDT) (envelope-from marc@oldserver.demon.nl) Received: from [212.238.105.241] (helo=propro) by post.mail.nl.demon.net with esmtp (Exim 2.02 #1) id 11YeLe-00044P-00; Tue, 5 Oct 1999 23:50:22 +0000 Date: Wed, 6 Oct 1999 01:50:21 +0200 (CEST) From: Marc Schneiders To: Greg Lehey Cc: Ilia Chipitsine , Kent Stewart , Oleg Ogurok , Kenneth Wayne Culver , freebsd-questions@freebsd.org Subject: Re: FreeBSD 4.0 release In-Reply-To: <19991006083920.I40186@freebie.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Greg Lehey wrote: > On Tuesday, 5 October 1999 at 8:06:08 +0600, Ilia Chipitsine wrote: > > -----BEGIN PGP SIGNED MESSAGE----- > > > > On Mon, 4 Oct 1999, Marc Schneiders wrote: > > > >>> I have a spare system, which is exactly Intel 386DX-33 (overclocked to > >>> 40MHz) with 4Mb of RAM. I'd happy to built a system which will work > >>> 24-hours only as E-mail/new/FIDO gateway. Perfomance _is_ acceptable. I > >>> have a 28.8K modem for dialing out. My experience proves that 386DX-40 > >>> can handle 4 x 115200 NUL-modems + 10Mb Ethernet (well, it was Linux > >>> RH-5.0 boxen running as IPX <-> IP <-> IPX gateway). > >>> > >>> I think that my 386 boxen will stay without any use ... > >>> Anybody knows, is it possible to install NetBSD/OpenBSD on 4Mb of RAM ?! > >>> > >> [...] > >> > >> It isn't possible :-( Our only relief is 2.1.7.1. That works and installs > >> ok on 4 MB. > > > > so, 2.1.7.1 is the greatest one. where can I download it ? > > I don't think you can. > > > if it is not supported anymore, why ? > > Because it's obsolete. > > If you *really* need to do this, rather than running PicoBSD, for > example, you can always get it from the repository. > > Greg > -- > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > The point was to run with less than 8 MB. Pico needs 8. 2.1.7.1 *is* available at: ftp.de.freebsd.org in /pub/FreeBSD/2.1.7.1-RELEASE Marc -- Marc Schneiders || || marc@venster.nl || Null message body; marc@oldserver.demon.nl || hope that's ok To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 16:55: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.unacom.com (www.lockes.net [206.113.48.50]) by hub.freebsd.org (Postfix) with SMTP id 7073E156B7 for ; Tue, 5 Oct 1999 16:54:56 -0700 (PDT) (envelope-from geniusj@phoenix.unacom.com) Received: (qmail 30441 invoked by uid 1016); 5 Oct 1999 23:54:52 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 5 Oct 1999 23:54:52 -0000 Date: Tue, 5 Oct 1999 19:54:52 -0400 (EDT) From: - To: questions@freebsd.org Subject: 4.0-CURRENT installation problems Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm only having this problem with 4.0-CURRENT fetched from ftp://current.freebsd.org .. When booting on the bootdisk, after detecting ed0 (my ethernet card), it tries to detect it plug and play also.. it detects it as unknown0, and then freezes up.. How would I get rid of pnp in that kernel from userconfig or something? I need it to boot :) Thanks! Jason DiCioccio To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 17: 1: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from jumping-spider.aracnet.com (jumping-spider.aracnet.com [205.159.88.14]) by hub.freebsd.org (Postfix) with ESMTP id 9D9FF14BE7 for ; Tue, 5 Oct 1999 17:00:51 -0700 (PDT) (envelope-from lcline@aracnet.com) Received: from aracnet.com (alexandria.cust.aracnet.com [216.99.207.17]) by jumping-spider.aracnet.com (8.9.3/8.9.3) with ESMTP id QAA20299; Tue, 5 Oct 1999 16:58:03 -0700 Message-ID: <37FA923B.A5254694@aracnet.com> Date: Tue, 05 Oct 1999 17:05:15 -0700 From: Larry Cline X-Mailer: Mozilla 4.7 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: Kevin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Contour Mouse support? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Kevin wrote: > > Has anyone ever got a "Contour Mouse" to work? (doesn't have a brand name, > unless that is it). > > It is a ps/2 style mouse, and I tried to enable that on a 2.2.8 box...but > it didn't want to work. > > TIA > kevin > I am using one on 3.2. Make sure you have the switch on the bottom set to 'PC' Larry To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 17: 8: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from csimo02.mx.cs.com (csimo02.mx.cs.com [205.188.156.53]) by hub.freebsd.org (Postfix) with ESMTP id BE7C0150B7 for ; Tue, 5 Oct 1999 17:07:56 -0700 (PDT) (envelope-from AKAPromo@cs.com) Received: from AKAPromo@cs.com by csimo02.mx.cs.com (mail_out_v22.4.) id zOALa03043 (4546) for ; Tue, 5 Oct 1999 20:00:34 -0400 (EDT) From: AKAPromo@cs.com Message-ID: Date: Tue, 5 Oct 1999 20:00:33 EDT Subject: Carve Some eXtreme Awareness This Winter (6) To: AKAPromo@cs.com MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: CompuServe 2000 32-bit sub 65 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This winter, AKA Promo, in association with Markethink Consulting and Vertek Snowboard Manufacturing will offer executives, small businesses, and large corporations an opportunity to sublimate their company's logos on to high end snowboards at below factory wholesale and hundreds below retail. Some examples - http://www.vertekmfg.com/winter99.html Whether they are for personal use, holiday gifts, corporate merchandise, advertising, or winter promotional incentives, these dual purpose advertising mediums are unbeatable. The hour glass is counting down the days until Christmas. Last count - 80 days! If you would like more information, a quote, or if you hope to order for delivery this season, there is no time to spare Your Colors, Your Logo, Your URL, Your Corporate Identity. - CALL DIRECT OR EMAIL TODAY! AKA Promo akapromo@cs.com Markethink http://www.markethink.com info@markethink.com Vertek Mfg http://www.vertekmfg.com info@vertekmfg.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 17:16:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mc-qout4.whowhere.com (mc-qout4.whowhere.com [209.185.123.18]) by hub.freebsd.org (Postfix) with SMTP id 057B714A0D for ; Tue, 5 Oct 1999 17:16:07 -0700 (PDT) (envelope-from uvatha@my-deja.com) Received: from Unknown/Local ([?.?.?.?]) by my-deja.com; Tue Oct 5 17:15:55 1999 To: freebsd-questions@freebsd.org Date: Tue, 05 Oct 1999 17:15:55 -0700 From: "+ +" Message-ID: Mime-Version: 1.0 Cc: X-Sent-Mail: on Reply-To: X-Mailer: MailCity Service Subject: port forwarding, again X-Sender-Ip: 24.5.247.19 Organization: My Deja Email (http://www.my-deja.com:80) Content-Type: text/plain; charset=us-ascii Content-Length: 1713 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all, I posted this question last week in the form of "Can I do port forwarding with 2.2.7?" I'm going to post again in the form of, "Can I do it at all?", because I'm against a brick wall here. (No one replied to my post; I'm hoping I didn't phrase the question right.) All I need to do is forward TCP packets that arrive at my firewall (running FreeBSD 2.2.7) on a certain port (let's say 4000) to the same port on a machine on my local network. It seems that I should be able to do this by adding a single ipfw rule to my rc.firewall. However, the ipfw man page is cryptic and offers no examples for my situation. Nor do any of the archives for this list seem to tackle this exact problem. I *really* need to get this running, hopefully soon, and with a minimum of fuss. My order of fallbacks, then, will be: 1) Learn how to do it with 2.2.7 and ipfw. I was hoping this would be easy. 2) Learn that I need a newer version of FreeBSD and do some sort of painful upgrade. (The machine is not really in any shape to do a "make world", unfortunately, and it does not have a CD-ROM drive anymore.) 3) Learn that I cannot do it with FreeBSD. Wipe the hard drive, install Linux, and do it with ipchains. I'd rather not do this. 4) Tell my employer that this task is impossible and that we might as well forget the whole thing. :) At the very least, can someone tell me a commercial support firm that I could call and at least pay $50 to get a "no, you can't do that" or "yeah, you can do that" response? I would appreciate any input greatly. Thanks! --== Sent via Deja.com http://www.deja.com/ ==-- Share what you know. Learn what you don't. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 17:47:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ems.guangzhou.gd.cn (ems.guangzhou.gd.cn [202.96.128.70]) by hub.freebsd.org (Postfix) with ESMTP id 04BD114E36 for ; Tue, 5 Oct 1999 17:46:44 -0700 (PDT) (envelope-from liang@ems.guangzhou.gd.cn) Received: from localhost (liang@localhost) by ems.guangzhou.gd.cn (8.8.8+Sun/8.9.1) with ESMTP id IAA01647 for ; Wed, 6 Oct 1999 08:48:05 +0800 (CST) Date: Wed, 6 Oct 1999 08:48:04 +0800 (CST) From: To: freebsd-questions@FreeBSD.ORG Subject: Does 3.3-release support CallBack? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Could you please tell me if 3.3-release supports Callback when connecting to internet using a modam? And, When I install 3.3-release, I want to use Callback too, is it supported too? Sincerely, liang To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 18:27: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 73A0814E26 for ; Tue, 5 Oct 1999 18:27:03 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id VAA13971; Tue, 5 Oct 1999 21:30:02 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910060130.VAA13971@cc942873-a.ewndsr1.nj.home.com> Subject: Re: port forwarding, again In-Reply-To: from + + at "Oct 5, 1999 05:15:55 pm" To: uvatha@my-Deja.com (+ +) Date: Tue, 5 Oct 1999 21:30:02 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG + + wrote, > Hi all, > > I posted this question last week in the form of "Can > I do port forwarding with 2.2.7?" Yes, but not with ipfw(8) alone. > I'm going to post > again in the form of, "Can I do it at all?", because > I'm against a brick wall here. (No one replied to my post; I'm hoping I didn't phrase the question right.) Dunno. What often happens is no one has an exact answer, so they leave it for someone who does. No one seemed to offer one, so I'll offer what little info I have. > All I need to do is forward TCP packets that arrive at > my firewall (running FreeBSD 2.2.7) on a certain port > (let's say 4000) to the same port on a machine on my > local network. It seems that I should be able to do this by adding a single ipfw rule to my rc.firewall. Not in 2.2.x you can't (if my 2.2.8-STABLE system docs are correct). However, is there a reason you can't poke a hole in the firewall at 4000 to let packets pass? That can get the same job done. > However, the ipfw man page is cryptic and offers no > examples for my situation. Nor do any of the archives > for this list seem to tackle this exact problem. People do ask this a lot. The proper tool for doing this is natd(8). Think about it, network address translation is really what you are trying to do here. You want a machine behind the firewall/natd box to have its address translated. You would use a "divert" rule in ipfw(8) to pass traffic of interest to natd(8) which then can then forward the packets as you want. > I *really* need to get this running, hopefully soon, > and with a minimum of fuss. My order of fallbacks, > then, will be: > > 1) Learn how to do it with 2.2.7 and ipfw. I was hoping this would be easy. Just need to figure out the ipfw(8)-natd(8) combo to do it. > 2) Learn that I need a newer version of FreeBSD and > do some sort of painful upgrade. (The machine is not > really in any shape to do a "make world", > unfortunately, and it does not have a CD-ROM drive > anymore.) FreeBSD 3.x has a "fwd" action in ipfw(8). However, unless the host receiving the packet is pretty smart, this probably will not work the way you would want. The "fwd" rule _does not alter the packet_ it forwards; it does not do NATd. The "fwd" mechanism is aimed more towards proxying applications running on localhost. > 3) Learn that I cannot do it with FreeBSD. Wipe the > hard drive, install Linux, and do it with ipchains. > I'd rather not do this. If you know how to do it and are confortable with ipchains... I may incur the wrath of some on the list, but if it must get done, get it done however you know how. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:35: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 182B614E2B for ; Tue, 5 Oct 1999 19:34:59 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id TAA48148; Tue, 5 Oct 1999 19:34:53 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37FAB54D.D137A92A@gorean.org> Date: Tue, 05 Oct 1999 19:34:53 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: daniel B Cc: freebsd-questions@freebsd.org Subject: Re: Upgraded to 3.3-STABLE fontpage passwd don't work References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG daniel B wrote: > > Hi; > > I just upgraded my web server to 3.3-RELEASE and now all > frontpage admin passwords don't work; I had everything running OK > with 2.2.8-STABLE; i AM RUNNING APACHE 1.3.6 AND FRONTPAGE 2000 exts. You probably neglected to install DES when you upgraded. FP requires it. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:44:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mc-qout4.whowhere.com (mc-qout4.whowhere.com [209.185.123.18]) by hub.freebsd.org (Postfix) with SMTP id 8770814D2E for ; Tue, 5 Oct 1999 19:44:25 -0700 (PDT) (envelope-from uvatha@my-deja.com) Received: from Unknown/Local ([?.?.?.?]) by my-deja.com; Tue Oct 5 19:42:42 1999 To: freebsd-questions@freebsd.org Date: Tue, 05 Oct 1999 19:42:42 -0700 From: "+ +" Message-ID: Mime-Version: 1.0 Cc: cjc@cc942873-a.ewndsr1.nj.home.com X-Sent-Mail: on Reply-To: X-Mailer: MailCity Service Subject: Re: port forwarding, again X-Sender-Ip: 24.4.254.72 Organization: My Deja Email (http://www.my-deja.com:80) Content-Type: text/plain; charset=us-ascii Content-Length: 2160 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I said: > All I need to do is forward TCP packets that arriveat > my firewall (running FreeBSD 2.2.7) on a certain port > (let's say 4000) to the same port on a machine on my > local network. It seems that I should be able to do > this by adding a single ipfw rule to my rc.firewall. Crist said: > Not in 2.2.x you can't (if my 2.2.8-STABLE system > docs are correct). However, is there a reason you > can't poke a hole in the firewall at 4000 to let > packets pass? It's a masqueraded network, so the internal addresses (10.x.x.x) are not accessable to the outside world, firewall or not. Crist also said: > People do ask this a lot. The proper tool for doing > this is natd(8). Think about it, network address > translation is really what you are trying to do here. > You want a machine behind the firewall/natd > box to have its address translated. You would use a > "divert" rule in ipfw(8) to pass traffic of interest > to natd(8) which then can then Ah-HA! That is indeed a very good pointer. From the natd man page: -redirect_port linkspec Redirect incoming connections arriving to given port to another host and port. Linkspec is of the form proto targetIP:targetPORT [aliasIP:]aliasPORT [re- moteIP[:remotePORT]] where proto is either tcp or udp, targetIP is the desired target IP number, targetPORT is the desired target PORT number, aliasPORT is the requested PORT number and aliasIP is the aliasing address. RemoteIP and remotePORT can be used to specify the connection more accurately if necessary. For example, the argument tcp inside1:telnet 6666 means that tcp packets destined for port 6666 on this machine will be sent to the telnet port on the inside1 machine. Sounds like just what I wanted. However, executing: killall natd natd -u -m -n fxp0 -redirect_port tcp 10.0.0.6:4000 4000 Did not seem to have the desired effect. (No errors were reported, it just doesn't seem to be doing the port forward.) Any more thoughts? --== Sent via Deja.com http://www.deja.com/ ==-- Share what you know. Learn what you don't. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:45:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id EF664156D2 for ; Tue, 5 Oct 1999 19:44:53 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id MAA79201 for questions@FreeBSD.org; Wed, 6 Oct 1999 12:14:37 +0930 (CST) Received: from admiral.psrw.com (admiral.psrw.com [199.99.166.5]) by freebie.lemis.com (8.9.3/8.9.0) with ESMTP id EAA65164 for ; Wed, 6 Oct 1999 04:33:29 +0930 (CST) Received: from borg.psrw.com (IDENT:root@borg [10.1.1.58]) by admiral.psrw.com (8.9.1a/8.9.1) with ESMTP id PAA21733 for ; Tue, 5 Oct 1999 15:03:24 -0400 (EDT) Received: from psrw.com (IDENT:dhobbs@borg.psrw.com [10.1.1.58]) by psrw.com (8.9.3/8.9.3) with ESMTP id PAA03707 for ; Tue, 5 Oct 1999 15:03:19 -0400 Message-ID: <37FA4B77.9FD12112@psrw.com> Date: Tue, 05 Oct 1999 15:03:19 -0400 From: DHobbs Organization: PSRW X-Mailer: Mozilla 4.61 [en] (X11; U; Linux 2.2.5-15 i686) X-Accept-Language: en MIME-Version: 1.0 To: Greg Lehey Subject: Re: Minimum RAM required for FreeBSD References: <37F8EDDB.B8FBE3A4@psrw.com> <19991005082252.T40186@freebie.lemis.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Greg Lehey wrote: > Given what you've done, I'd suspect the CD-ROM drive. You should also > follow up to FreeBSD-questions; you can't rely on me to answer in a > timely fashion. I had two boxes exactly alike so I yanked the 8 meg out of the one and made one box 16 meg. Install went smoothly. I'm not on the questions mailing list and I have to play with this box before I get to have more, so I'll leave it in your best judgement to tell about this >8 meg minimum and I'll post it to a few BSD newsgroups. Thanks for your time. Dan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:45:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from culverk.student.umd.edu (culverk.student.umd.edu [129.2.196.87]) by hub.freebsd.org (Postfix) with ESMTP id E106A14F47 for ; Tue, 5 Oct 1999 19:44:49 -0700 (PDT) (envelope-from culverk@culverk.student.umd.edu) Received: from localhost (culverk@localhost) by culverk.student.umd.edu (8.9.3/8.9.3) with ESMTP id WAA00408 for ; Tue, 5 Oct 1999 22:43:12 -0400 (EDT) (envelope-from culverk@culverk.student.umd.edu) Date: Tue, 5 Oct 1999 22:43:12 -0400 (EDT) From: Kenneth Culver To: freebsd-questions@freebsd.org Subject: nmap Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I was just wondering, it seems that (at least nmap thinks so) that freebsd's security is not as good as linux. here is an nmap output from a linux box on the local LAN (using nmap -sF -O hostname): Starting nmap V. 2.3BETA6 by Fyodor (fyodor@dhp.com, www.insecure.org/nmap/) Interesting ports on luda.student.umd.edu (129.2.196.98): Port State Protocol Service 21 open tcp ftp 22 open tcp ssh 23 open tcp telnet 25 open tcp smtp 53 open tcp domain 79 open tcp finger 80 open tcp http 98 open tcp linuxconf 111 open tcp sunrpc 113 open tcp auth 119 open tcp nntp 139 open tcp netbios-ssn 513 open tcp login 514 open tcp shell 515 open tcp printer 602 open tcp unknown 623 open tcp unknown 628 open tcp qmqp 633 open tcp unknown 1024 open tcp unknown 1178 open tcp skkserv 6000 open tcp X11 TCP Sequence Prediction: Class=random positive increments Difficulty=1865858 (Good luck!) Remote operating system guess: Linux 2.1.122 - 2.2.12 Nmap run completed -- 1 IP address (1 host up) scanned in 38 seconds And this is my computer: Starting nmap V. 2.3BETA6 by Fyodor (fyodor@dhp.com, www.insecure.org/nmap/) Interesting ports on culverk.student.umd.edu (129.2.196.87): Port State Protocol Service 21 open tcp ftp 22 open tcp ssh 23 open tcp telnet 25 open tcp smtp 53 open tcp domain 79 open tcp finger 139 open tcp netbios-ssn 515 open tcp printer 1024 open tcp unknown 6000 open tcp X11 TCP Sequence Prediction: Class=random positive increments Difficulty=31411 (Worthy challenge) Remote operating system guess: FreeBSD 2.2.1 - 3.2 Nmap run completed -- 1 IP address (1 host up) scanned in 3 seconds anyone know? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:47:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hawk.prod.itd.earthlink.net (hawk.prod.itd.earthlink.net [207.217.120.22]) by hub.freebsd.org (Postfix) with ESMTP id 81AE0156D0 for ; Tue, 5 Oct 1999 19:46:25 -0700 (PDT) (envelope-from wasprouse@earthlink.net) Received: from grazzt (1Cust165.tnt4.gulfport.ms.da.uu.net [63.25.191.165]) by hawk.prod.itd.earthlink.net (8.9.3/8.9.3) with SMTP id TAA29443 for ; Tue, 5 Oct 1999 19:46:10 -0700 (PDT) Received: by localhost with Microsoft MAPI; Tue, 5 Oct 1999 21:45:42 -0500 Message-ID: <01BF0F7A.F91FC9A0.wasprouse@earthlink.net> From: Wayne Sprouse To: "'freebsd-questions@freebsd.org'" Subject: Unable to Boot! Date: Tue, 5 Oct 1999 21:45:23 -0500 X-Mailer: Microsoft Internet E-mail/MAPI - 8.0.0.4211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG To Whom It May Concern: I am having problems getting FreeBSD 3.2 to boot. I am able to install it just fine but when I try to boot to FreeBSD it will not go. I get to the Boot Manager and it gives me the options of: F1 - DOS and F5 - Disk 1. I press F5 and the boot manager comes up again. So I press F5 again and the boot manager comes up a third time. When I press F5 a third time an error comes up saying "Invalid System Disk. Please insert a system disk and press any key to continue." At this point the only option that I have is to cold boot my machine. If at anytime during the boot manager options I press F1 it boots up into Win98. I have tried multiple times to get this to work and can not. What am I doing wrong? Any help would be most appreciated. My system Configuration consists of the following: 1) AMD Athlon 500MHz CPU 2) MSI 6167 Motherboard (EV6 200MHz bus) 3) Adaptec AHA-2940UW 4) Three Quantum UW SCSI HD 5) Plextor UltraPlex Ultra-SCSI CD-ROM 6) Diamond SpeedStar A50 display 7) STB BlackMagic3D Voodoo2 8) SoundBlaster Live! Value 9) 128 MB PC-100 memory 10) 3Com Etherlink III Bus-Master NIC 11) Zoom 56Kflex Modem I hope this helps. Sincerely, Wayne Sprouse To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:47:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id D34A6156DF for ; Tue, 5 Oct 1999 19:47:32 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id TAA48152; Tue, 5 Oct 1999 19:47:26 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37FAB83D.711376F3@gorean.org> Date: Tue, 05 Oct 1999 19:47:25 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: rknebel@uplink.net Cc: questions@freebsd.org Subject: Re: hpfs file system References: <99100519245700.03245@rknebel.uplink.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Rick Knebel wrote: > > Hi, > I have a zip disk formatted in the hpfs file system from OS2 Warp. > Is there a way to access this under linux? You should try asking on a linux list. :) There actually is a way to get read only access to hpfs file systems in freebsd, but I don't remember the name of the program. The mail archives should have it. Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:51:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mc-qout4.whowhere.com (mc-qout4.whowhere.com [209.185.123.18]) by hub.freebsd.org (Postfix) with SMTP id D940314E81 for ; Tue, 5 Oct 1999 19:51:25 -0700 (PDT) (envelope-from uvatha@my-deja.com) Received: from Unknown/Local ([?.?.?.?]) by my-deja.com; Tue Oct 5 19:49:18 1999 To: freebsd-questions@freebsd.org Date: Tue, 05 Oct 1999 19:49:18 -0700 From: "+ +" Message-ID: Mime-Version: 1.0 Cc: cjc@cc942873-a.ewndsr1.nj.home.com X-Sent-Mail: off Reply-To: X-Mailer: MailCity Service Subject: Re: port forwarding, again X-Sender-Ip: 24.4.254.72 Organization: My Deja Email (http://www.my-deja.com:80) Content-Type: text/plain; charset=us-ascii Content-Length: 429 Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I just realized: it does work! I was testing it from my internal network, which was not coming in via fxp0 (the ethernet connection to the outside world). I telneted to an external machine and tried it, and volia! I knew it was an easy solution, I just didn't know the right program :) Thanks much for your help, Crist. --== Sent via Deja.com http://www.deja.com/ ==-- Share what you know. Learn what you don't. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:51:47 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id 9309B14E81 for ; Tue, 5 Oct 1999 19:51:42 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from gorean.org (master [10.0.0.2]) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id TAA48157; Tue, 5 Oct 1999 19:50:30 -0700 (PDT) (envelope-from Doug@gorean.org) Message-ID: <37FAB8F6.E0592E90@gorean.org> Date: Tue, 05 Oct 1999 19:50:30 -0700 From: Doug Organization: Triborough Bridge & Tunnel Authority X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 4.0-CURRENT-0927 i386) X-Accept-Language: en MIME-Version: 1.0 To: - Cc: questions@freebsd.org Subject: Re: 4.0-CURRENT installation problems References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG - wrote: > > I'm only having this problem with 4.0-CURRENT fetched from > ftp://current.freebsd.org .. First question, why are you trying to run -current? Second question, do you qualify to run -current based on the requirements listed in the various sections that discuss this topic on our web page? Third question, after you've read all of the above and figure out which list is the proper one to send this question to, what snap date of -current are you talking about? Good luck, Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 19:56:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id A63FB14D0D for ; Tue, 5 Oct 1999 19:56:31 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id MAA79248; Wed, 6 Oct 1999 12:24:49 +0930 (CST) Date: Wed, 6 Oct 1999 12:24:49 +0930 From: Greg Lehey To: Barrett Richardson Cc: FreeBSD-questions@FreeBSD.ORG Subject: Re: vinum failure simulation not working Message-ID: <19991006122449.E78191@freebie.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Saturday, 2 October 1999 at 15:18:12 -0400, Barrett Richardson wrote: > > I am running 3.3-RELEASE and have two 18GB drives that I want to mirror. > > I've set them up like this. > > --- /etc/vinum.rc --- > drive d1 device /dev/da1e > drive d2 device /dev/da2e > volume mirror > plex org concat > sd length 17516m drive d1 > plex org concat > sd length 17516m drive d2 > --- end --- > > > I do these steps: > > libra# vinum create -f /etc/vinum.rc > > libra# vinum init mirror.p0 > libra# vinum init mirror.p1 > > Then wait till that finishes, and put these two lines in my rc.conf > start_vinum="YES" > vinum_drives="da1 da2" > and then reboot. > > I notice that mirror.p1 is faulty and mirror.p1.s0 is reviving Correct. From the man page: volume name [options] Define a volume with name name. Options are: [snip] setupstate When creating a multi-plex volume, assume that the contents of all the plexes are consistent. This is normally not the case, and correctly you should use the init command to first bring them to a consistent state. In the case of striped and concatenated plexes, however, it does not normally cause problems to leave them inconsistent: when using a volume for a file system or a swap partition, the previous con- tents of the disks are not of interest, so they may be ignored. If you want to take this risk, use this keyword. It will only apply to the plexes defined immediately after the volume in the configuration file. If you add plexes to a volume at a later time, you must integrate them. but > there is no activity on either drive, so I do this: > > libra# vinum start mirror.p1 > > The drives start humming and after a while mirror.p1 is up. Good. > Next, I build a filesystem on /dev/vinum/rmirror: > > libra# newfs -v /dev/vinum/rmirror > > and mount it > > libra# mount /dev/vinum/mirror /mnt > > and copy some files to it > > libra# cd /usr;find src/sys -print | cpio -pdm /mnt > > Then I stop mirror.p1 > > libra# vinum stop mirror.p1 > > and commence to copy some more files > > libra# cd /usr;find src.old -print | cpio -pdm /mnt > > All the copied files are ok, and 'vinum l' shows > mirror.p1.s0 to be obsolete. That seems reasonable. You should have seen some console messages stating the fact. > I then unmount the filesystem, uncomment the lines out of > rc.conf that start vinum, and reboot. Once it comes > back up I have no vinum process running. OK. > Here's what I do. I disklabel da2 and change slice e back to 4.2BSD > and build a filesystem on /dev/rda2s1e, copy some files to it ... > I then unmount it, disklabel da2 and change slice e back to vinum, > edit my rc.conf to launch vinum again, and reboot. > > Once it comes back up, a 'vinum l' show mirror.p1 as faulty, and > mirror.p1.s0 as crashed. So I do this > > libra# vinum start mirror.p1 > > And mirror.p1.s0 changes to 'reviving', the drives are busy, > all is good. > > I'm feeling brave, so I mount the filesystem > > libra# mount /dev/vinum/mirror /mnt > > While it is reviving and have a look at /mnt > > libra# ls -l /mnt > > and see my directories > > total 2 > drwxr-xr-x 3 root wheel 512 Oct 2 14:31 src > drwxr-xr-x 3 root wheel 512 Oct 2 14:33 src.old > > I keep doing 'ls -l' and after a while, src.old disappears. > Then it reappears. It disappears again a while later. > The files in src do the same. They keep appearing and > disappearing, but the directory src is always there, > just sometimes empty. The files in src.old which I > copied after I downed mirror.p1 have never been visible. > > I've run this test several times with similar results > and haven't yet been able to rebuild the mirror. > > Any hints or tips? Well, you've certainly done a lot of things. At the moment I'm checking the revive code, and it looks as if there are some bogons in there. I'd recommend rebuilding offline until you hear otherwise. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 20: 3:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from tigger.nu.org (whiz4.zip.com.au [61.8.19.180]) by hub.freebsd.org (Postfix) with ESMTP id 7663214E9B for ; Tue, 5 Oct 1999 20:03:38 -0700 (PDT) (envelope-from vance@nu.org) Received: by tigger.nu.org (Postfix, from userid 1000) id 7269016F9; Wed, 6 Oct 1999 13:03:36 +1000 (EST) Date: Wed, 6 Oct 1999 13:03:36 +1000 From: Christopher Vance To: ipfilter@cairo.anu.edu.au, freebsd-questions@freebsd.org Subject: FreeBSD ipfw vs. ipfilter Message-ID: <19991006130336.E87124@nu.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG ipfw is part of FreeBSD by default. ipf[ilter] is available for FreeBSD and a number of other OSs. I use FreeBSD at home, have used it at work, but also co-administer a Solaris 2.7 SPARC on a different continent. Both machines need to be isolated to some extent from their ISP, because I don't trust them (or their ISPs) to know what they're doing. Currently I'm using ipf (for the last six months?) on FreeBSD because I wanted to check it out before installing it on the Solaris machine, since I have no console access to recover from any medium-to-big blunder. Previously I used ipfw for over a year. I wonder if either list could give me some objective recommendations for the future. (I trust that invective has no place here...) -- Christopher Vance To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 20: 6:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from culverk.student.umd.edu (culverk.student.umd.edu [129.2.196.87]) by hub.freebsd.org (Postfix) with ESMTP id 6B4031557D for ; Tue, 5 Oct 1999 20:06:35 -0700 (PDT) (envelope-from culverk@culverk.student.umd.edu) Received: from localhost (culverk@localhost) by culverk.student.umd.edu (8.9.3/8.9.3) with ESMTP id XAA00523 for ; Tue, 5 Oct 1999 23:03:59 -0400 (EDT) (envelope-from culverk@culverk.student.umd.edu) Date: Tue, 5 Oct 1999 23:03:59 -0400 (EDT) From: Kenneth Culver To: freebsd-questions@freebsd.org Subject: nmap Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Even worse, I'm running FreeBSD 4.0-CURRENT with a kernel that is 10 minutes old, and it's saying I have FreeBSD 3.2, my friend who has FreeBSD 3.3 is getting a os version of 4.0 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 20:27:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.portal2.com (ns1.portal2.com [203.85.226.193]) by hub.freebsd.org (Postfix) with SMTP id 87139150E1 for ; Tue, 5 Oct 1999 20:27:48 -0700 (PDT) (envelope-from yusufg@outblaze.com) Received: (qmail 52369 invoked from network); 6 Oct 1999 03:26:39 -0000 Received: from yusufg.portal2.com (qmailr@203.85.226.249) by ns1.portal2.com with SMTP; 6 Oct 1999 03:26:39 -0000 Received: (qmail 3567 invoked by uid 500); 6 Oct 1999 03:27:44 -0000 Date: Wed, 6 Oct 1999 11:27:44 +0800 From: Yusuf Goolamabbas To: Chris Dillon Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Trying to achieve zen with natd Message-ID: <19991006112744.A3111@outblaze.com> References: <19991005045350.11294.qmail@yusufg.portal2.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > That doesn't really make any sense... Is fxp1 attached to your > private network, or the public network? Both, some machines on that network have valid routable address and some machines have non routable addresses. Therefore I have aliased a 192.168 on this interface What I would like is packets coming via this aliased interface get NAT'ted to the public interface which is also bound to the same card This card is connected to a switch which connects via a router to the WAN interface This machine also has a second NIC which connects to a different switch and then on via a router to a different WAN interface The current function of this box is to act as router to get to/fro from machines in the different ISP segments without the packets leaving the premises and going through the IX. This works very well. Now, I would also like it to be a NAT box From what I read of NAT, it usually requires 2 NIC's, one to the internal (192.168) network and the other NIC to the external one. What I need to do is to make this work with one NIC bound to 2 different IP addresses. Is this possible ? > > > I would like to configure this box to act as a NATD box. Set the right > > kernel config and recompile the kernel > > > > /etc/rc.conf > > > > gateway_enable="YES" > > firewall_enable="YES" > > firewall_type="open" > > natd_enable = "YES" > > natd_interface = "fxp1" #Assuming this will take the public interface > > natd_flags = "-u" > > The natd_interface does indeed take the public interface, but that > isn't what you seem to be indicating below.... > > > I did the following in /etc/rc.local > > > > ifconfig fxp1 alias 192.168.0.1 netmask 255.255.255.0 > > You don't need to, and probably shouldn't, do this in /etc/rc.local. > Add a line like this to /etc/rc.conf: > > ifconfig_fxp1_alias0="inet 192.168.0.1 netmask 255.255.255.0" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 20:29:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from school.cs.indiana.edu (school.cs.indiana.edu [129.79.252.113]) by hub.freebsd.org (Postfix) with ESMTP id 8139715199 for ; Tue, 5 Oct 1999 20:29:12 -0700 (PDT) (envelope-from jiachen@cs.indiana.edu) Received: from localhost (jiachen@localhost) by school.cs.indiana.edu (8.9.3/8.9.3/IUCS_2.28) with ESMTP id WAA02576 for ; Tue, 5 Oct 1999 22:29:11 -0500 (EST) X-Authentication-Warning: school.cs.indiana.edu: jiachen owned process doing -bs Date: Tue, 5 Oct 1999 22:29:11 -0500 (EST) From: Jia-Huang Chen To: freebsd-questions@FreeBSD.ORG Subject: FTP daemon error messages when login In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I'm running 4.0 current and using the default FTP server (Version 6.00LS). Every time when I try ftp to the freebsd 4.0 box, the box always shows the following similar messages in both root console and /var/log/messages: Oct 5 01:55:32 class ftpd[796]: no modules loaded for `ftpd' service Oct 5 01:55:32 class ftpd[796]: no modules loaded for `ftpd' service Oct 5 01:55:32 class ftpd[796]: no modules loaded for `ftpd' service Oct 5 01:55:32 class ftpd[796]: auth_pam: Permission denied Oct 5 01:55:32 class ftpd[796]: auth_pam: Permission denied Oct 5 01:55:32 class ftpd[796]: auth_pam: Permission denied What's wrong and could I avoid it ? Anyone could give me some hints about how to set up my ftp service correctly ? thanks alot, Jia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 20:52:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id ED58014CE6; Tue, 5 Oct 1999 20:52:19 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id NAA79744; Wed, 6 Oct 1999 13:21:57 +0930 (CST) Date: Wed, 6 Oct 1999 13:21:56 +0930 From: Greg Lehey To: Jia-Huang Chen Cc: FreeBSD current users Subject: Re: FTP daemon error messages when login Message-ID: <19991006132156.J78191@freebie.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG [moving from -questions to -current] On Tuesday, 5 October 1999 at 22:29:11 -0500, Jia-Huang Chen wrote: > Hi, > I'm running 4.0 current and using the default FTP server (Version 6.00LS). > Every time when I try ftp to the freebsd 4.0 box, the box always shows the > following similar messages in both root console and /var/log/messages: > > Oct 5 01:55:32 class ftpd[796]: no modules loaded for `ftpd' service > Oct 5 01:55:32 class ftpd[796]: no modules loaded for `ftpd' service > Oct 5 01:55:32 class ftpd[796]: no modules loaded for `ftpd' service > Oct 5 01:55:32 class ftpd[796]: auth_pam: Permission denied > Oct 5 01:55:32 class ftpd[796]: auth_pam: Permission denied > Oct 5 01:55:32 class ftpd[796]: auth_pam: Permission denied > > What's wrong and could I avoid it ? Well, for a start, either don't run -CURRENT, or send your messages to FreeBSD-current mailing list. > Anyone could give me some hints about how to set up my ftp service > correctly ? thanks alot, This looks like a recently introduced bogon. I'm seeing it too. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 20:53:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 9B7D514C28 for ; Tue, 5 Oct 1999 20:53:44 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id XAA14252; Tue, 5 Oct 1999 23:55:58 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910060355.XAA14252@cc942873-a.ewndsr1.nj.home.com> Subject: Re: Unable to Boot! In-Reply-To: <01BF0F7A.F91FC9A0.wasprouse@earthlink.net> from Wayne Sprouse at "Oct 5, 1999 09:45:23 pm" To: wasprouse@earthlink.net (Wayne Sprouse) Date: Tue, 5 Oct 1999 23:55:58 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG ('freebsd-questions@freebsd.org') Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Wayne Sprouse wrote, > To Whom It May Concern: > > I am having problems getting FreeBSD 3.2 to boot. I am able to > install it just fine but when I try to boot to FreeBSD it will not go. I > get to the Boot Manager and it gives me the options of: F1 - DOS and F5 - > Disk 1. I press F5 and the boot manager comes up again. So I press F5 again > and the boot manager comes up a third time. When I press F5 a third time an > error comes up saying "Invalid System Disk. Please insert a system disk and > press any key to continue." At this point the only option that I have is to > cold boot my machine. If at anytime during the boot manager options I press > F1 it boots up into Win98. I have tried multiple times to get this to work > and can not. What am I doing wrong? Any help would be most appreciated. My > system Configuration consists of the following: [snip] > 3) Adaptec AHA-2940UW > 4) Three Quantum UW SCSI HD > 5) Plextor UltraPlex Ultra-SCSI CD-ROM You have left out some important info: - On which drive did you put FreeBSD? - How is the drive sliced (MS-DOS partitioned)? - How is the FreeBSD slice partitioned? - Where/How did you add the boot code? The BootEasy does seem to be OK, but for some reason, it does not see the FreeBSD slice. Where is the slice and what BIOS do you have? -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:18:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id D89091533D for ; Tue, 5 Oct 1999 21:18:05 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YiVu-000KXv-00; Wed, 6 Oct 1999 05:17:14 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id FAA28228 for ; Wed, 6 Oct 1999 05:17:13 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 05:17:13 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: AbiWord Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Well, i figured out the font problem. But has anyone had any other problems with AbiWord? Every time i hit SPACE, the last menu i accessed drops down. And there was a core dump when i exited. Has anyone seen this? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:33:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lab321.ru (l321.omsk.ru [195.161.22.245]) by hub.freebsd.org (Postfix) with ESMTP id BF4C6156D9 for ; Tue, 5 Oct 1999 21:32:51 -0700 (PDT) (envelope-from kev@lab321.ru) Received: from ns.lab321.ru (kev@ns.lab321.ru [195.161.22.161]) by lab321.ru (8.9.3/8.9.3) with ESMTP id LAA17690 for ; Wed, 6 Oct 1999 11:31:11 +0700 (OSS) Date: Wed, 6 Oct 1999 11:31:10 +0700 (OSS) From: Eugeny Kuzakov To: questions@freebsd.org Subject: FreeBSD & UDI Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hi*& will FreeBSD join to UDI team? more info about UDI: http://www.projectudi.com -- Best wishes, Eugeny Kuzakov Laboratory 321 ( Omsk, Russia ) kev@lab321.ru ICQ#: 5885106 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:36:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lab321.ru (l321.omsk.ru [195.161.22.245]) by hub.freebsd.org (Postfix) with ESMTP id 2E511156F8 for ; Tue, 5 Oct 1999 21:34:58 -0700 (PDT) (envelope-from kev@lab321.ru) Received: from ns.lab321.ru (kev@ns.lab321.ru [195.161.22.161]) by lab321.ru (8.9.3/8.9.3) with ESMTP id LAA17984 for ; Wed, 6 Oct 1999 11:32:11 +0700 (OSS) Date: Wed, 6 Oct 1999 11:32:11 +0700 (OSS) From: Eugeny Kuzakov To: questions@freebsd.org Subject: Re: FreeBSD & UDI In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Eugeny Kuzakov wrote: > more info about UDI: http://www.projectudi.com ops... http://www.projectudi.org -- Best wishes, Eugeny Kuzakov Laboratory 321 ( Omsk, Russia ) kev@lab321.ru ICQ#: 5885106 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:38:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from jade.cynikal.net (cynikal.net [205.189.73.189]) by hub.freebsd.org (Postfix) with ESMTP id 6E22A14F2C for ; Tue, 5 Oct 1999 21:38:25 -0700 (PDT) (envelope-from defiance@jade.cynikal.net) Received: by jade.cynikal.net (Postfix, from userid 1006) id C0175319B; Wed, 6 Oct 1999 00:43:23 +0000 (GMT) Received: from localhost (localhost [127.0.0.1]) by jade.cynikal.net (Postfix) with ESMTP id 647EB319A for ; Wed, 6 Oct 1999 00:43:23 +0000 (GMT) Date: Wed, 6 Oct 1999 00:43:23 +0000 (GMT) From: Kevin Libutsi To: freebsd-questions@freebsd.org Subject: i would like to get a book about free bsd? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG i would like to get a book containg EVERYTING about FreeBSD. I saw it in a store but told me to e-mail you people to find out if you would sell it. It is a book containing commands and step-by-step instructions on how to use it. Can you please tell me where to get it. Thank You To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:54: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-94.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.94]) by hub.freebsd.org (Postfix) with ESMTP id BE96A15702 for ; Tue, 5 Oct 1999 21:52:54 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id TAA01142; Tue, 5 Oct 1999 19:12:32 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA00876; Tue, 5 Oct 1999 18:28:27 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910051728.SAA00876@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Tony Finch Cc: freebsd-questions@freebsd.org Subject: Re: execve and #! arguments In-reply-to: Your message of "Tue, 05 Oct 1999 10:53:21 BST." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Tue, 05 Oct 1999 18:28:20 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > The manual page says: > > An interpreter file begins with a line of the form: > > #! interpreter [arg] > > When an interpreter file is execve'd, the system actually execve's the > specified interpreter. If the optional arg is specified, it becomes the > first argument to the interpreter, and the name of the originally > execve'd file becomes the second argument; otherwise, the name of the > originally execve'd file becomes the first argument. The original argu- > ments are shifted over to become the subsequent arguments. The zeroth > argument, normally the name of the execve'd file, is left unchanged. > > but FreeBSD allows more than one arg on the #! line, and as far as I > can tell has done since before version 2.0. Other systems, including > NetBSD, Linux, Solaris, Irix, 386BSD, and 4.3BSD-Reno, implement what > the manual page says -- only one argument is passed from the #! line > to the interpreter. > > Why the difference? 'cos FreeBSD's better :-) > Tony. > -- > f.a.n.finch dot@dotat.at fanf@demon.net > Apache Software Foundation Member -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:54: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-94.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.94]) by hub.freebsd.org (Postfix) with ESMTP id AA6011570B for ; Tue, 5 Oct 1999 21:53:21 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id FAA00343; Wed, 6 Oct 1999 05:21:43 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id FAA04816; Wed, 6 Oct 1999 05:22:26 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910060422.FAA04816@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Richard Morte Cc: Brian Somers , "freebsd-questions@FreeBSD.ORG" Subject: Re: ppp -auto is trigger-happy In-reply-to: Your message of "Tue, 05 Oct 1999 23:23:00 BST." <37FA7A44.9290918B@sinclairassoc.force9.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 06 Oct 1999 05:22:26 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Brian Somers wrote: > > > > > On Wed, Sep 29, 1999 at 09:25:48AM +1200, Jonathan Chen wrote: > > > > On Tue, 28 Sep 1999, Richard Morte wrote: > > > > > > > > > Hi, > > > > > > > > > > Can anyone help explain why ppp in -auto -alias mode dials out as soon > > > > > as I click in the location field in Netscape? Do I need to set up IP > > > > > filtering? Without some sort of filtering or additional configuration I > > > > > don't seem to be able to browse documents on the local machine without > > > > > accessing the modem. > > > > > > > > Netscape does a DNS lookup the very first chance it gets. This will > > > > cause a dialout, unless you've blocked DNS from activating a callout. > > > > > > > I'm having the same problems. In fact, even starting the enlightenment config program causes ppp -auto to dial up. Same thing when sending mail from within mutt. Even though I have told sendmail to queue messages (sendmail -0 DeliveryMode=d -O HoldExpensive). Actually what it does is dial up, then stick them in the queue without delivering them. I assume that these are also caused because of DNS lookups. > > > > > > > > > So anyway, I'd really like to be disable DNS lookups from causing ppp -auto to dial. How can I do this? I assume that I want to re-enable DNS in ppp.linkup. > > > > > > Thanks a ton, > > > Tiller > > > > You may want to stick your hostname in /etc/hosts - blocking DNS is > > probably the wrong way to go as it'll make on-demand dialing > > practically useless. > > > > Look into ``ndc'' to find out what's being looked up and put this > > stuff in /etc/hosts if you can :-) > > -- > > Brian > > > > Don't _EVER_ lose your sense of humour ! > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > Brian, > > Thanks for your reply. I'm not at all familiar with ndc's output so I > guess you are referring to the stuff output by dumpdb - only there's so > much of it. However, I've been running named with the -d1 flag and this > seems to pick up all the requests in named.run. This sounds like the best option :-) > When Netscape was first installed, it reported that it couldn't find the > host for 'home. netscape.com' (or something like this). I assume > Netscape is configured to 'phone home, if only for the Netscape server > to set a cookie... I believe this is just the default home page. > I cannot detect any current dns lookups for netscape.com. However, the > following lookups are made when Netscape starts up now (output from > named.run): > > news.force9.net > usenet.force9.net > usenet.plus.net.uk > mail.force9.net > relay.force9.net > > These are all for Messenger. They are produced as soon as the browser > alone starts up (without even starting Mesenger). Since my ISP provides > server-assigned addresses I am not sure I can put any of this stuff in > /etc/hosts because the IP addresses change with each new connection. > > What do you suggest/ Hmm, maybe you need to run your own local mail relay and news server... > many Thanks, > > Ric -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 21:54:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id 94E97156FE for ; Tue, 5 Oct 1999 21:54:00 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id JAA16204; Wed, 6 Oct 1999 09:38:45 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id HAA01908; Wed, 6 Oct 1999 07:57:21 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id HAA00522; Wed, 6 Oct 1999 07:56:30 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Wed, 6 Oct 1999 07:56:25 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Greg Lehey Cc: Marc Schneiders , Kent Stewart , Oleg Ogurok , Kenneth Wayne Culver , freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 4.0 release In-Reply-To: <19991006083920.I40186@freebie.lemis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- On Wed, 6 Oct 1999, Greg Lehey wrote: > >> [...] > >> > >> It isn't possible :-( Our only relief is 2.1.7.1. That works and installs > >> ok on 4 MB. > > > > so, 2.1.7.1 is the greatest one. where can I download it ? > > I don't think you can. > > > if it is not supported anymore, why ? > > Because it's obsolete. > > If you *really* need to do this, rather than running PicoBSD, for > example, you can always get it from the repository. if I got it right, PicoBSD is just patch against FreeBSD, so it won't run on 4Mb either. > > Greg > -- > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/qsTeRxlWKN2EXhAQHlAgL8CVQcCE2Ia/MEn1sGcXBLeWJLVwk2RYkd tjyzwWp//lkpms3lhzrfbZXUvJGRFCU6lsq1vF5b4X9CGdzc5RrwSoRR4+6V/Ael Bc7GFcL9QgDkG9PqtQ3kWxj9QjMhl96a =C+q7 -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 22:23:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from internet.oit.edu (internet.OIT.EDU [140.211.135.12]) by hub.freebsd.org (Postfix) with ESMTP id BDF1314F1B for ; Tue, 5 Oct 1999 22:23:26 -0700 (PDT) (envelope-from berntj@oit.edu) Received: from dagryph (reshall-138-194.oit.edu [140.211.138.194]) by internet.oit.edu (8.9.1/8.9.3) with SMTP id WAA30216 for ; Tue, 5 Oct 1999 22:23:23 -0700 (PDT) From: "Jeffrey Bernt" To: Subject: Sniffer info... Date: Tue, 5 Oct 1999 22:23:32 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello. Quick question. I run a few computers on a network at college, and was wondering if there is any way to protect against a password sniffer? I ran the sniff program in the ports collection and was surprised what information I could collect =) What are my options to protect myself as well as the data I send and recieve? Any clues to this puzzle would be awesome. Thanks. Jeff Bernt berntj@oit.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Tue Oct 5 23:45:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zagnut.hotpop.com (zagnut.hotpop.com [204.57.55.32]) by hub.freebsd.org (Postfix) with ESMTP id BCA9914E77 for ; Tue, 5 Oct 1999 23:45:24 -0700 (PDT) (envelope-from ert@hotpop.com) Received: from superonline (unknown [212.252.145.65]) by zagnut.hotpop.com (Postfix) with SMTP id 2B373639E3; Wed, 06 Oct 1999 02:45:12 -0400 (EDT) Message-ID: <00f601bf0fc5$eeeac340$14000080@com> From: "Ertan Kucukoglu" To: Cc: "FreeBSD" References: <000801bf0f20$7f37d9c0$0a0a0a0a@kostya> Subject: Re: Internet resource sharing (was: (no subject)) Date: Wed, 6 Oct 1999 09:16:39 +0300 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG 70849 ----- Original Message ----- From: To: Sent: Tuesday, October 05, 1999 1:57 PM I have computer on which there is Freebsd it works as router How can I prorate Internet traffic between several users ? e-mail: kostia@obninsk.com e-mail: kostya@obninsk.net icq 17067364 Programing | Linux Admin | Unix Admin www.obninsk.net ----- Hello, Please, use simpe text in your messages not rich text format. Most of the people do not use graphic based mail programs such as Microsoft Outlook Express 5.0 :) I suggest you to use a proxy server. They reduce the bandwith usage well about 35%. I am using squid proxy server. It's just fine for me although my connection is dial-up ppp. You can find it in ports collection. The main site is http://squid.nlanr.net/Squid/. Also you can share your resources per user (or group) base. You may also use GATEWAY option in FreeBSD. This also shares internet resources. But I have little informatin about it so ask to the one who can reply your questions. Regards, Ertan Kucukoglu ert@hotpop.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0: 3:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Michelle.esfm.ipn.mx (Michelle.esfm.ipn.mx [148.204.104.23]) by hub.freebsd.org (Postfix) with ESMTP id A64D814BC6 for ; Wed, 6 Oct 1999 00:03:38 -0700 (PDT) (envelope-from mrspock@esfm.ipn.mx) Received: from localhost (mrspock@localhost) by Michelle.esfm.ipn.mx (8.9.3/8.9.1) with ESMTP id CAA19325 for ; Wed, 6 Oct 1999 02:03:29 -0500 (CDT) (envelope-from mrspock@esfm.ipn.mx) X-Authentication-Warning: Michelle.esfm.ipn.mx: mrspock owned process doing -bs Date: Wed, 6 Oct 1999 02:03:29 -0500 (CDT) From: Eduardo Viruena Silva To: freebsd-questions@freebsd.org Subject: tclmidi drivers Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello there! Has anybody installed successfully midi drivers for TCL Midi ? Have they been included in the new FreeBSD-3.3 kernel? - ______ _ * / /###\ / \ __ /\ /\ * / ./#### \ * \__|_/ | | / \/ \ | b#####| * _ | __ | | __ = .. \____ \ \_\#####/ / \| / \ | | /\_\/ = \_| * \___\###/ * \_/\_/\__/\__\/_/\__/ = \______/ _ | | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:19: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netgates.co.uk (macmail.netgates.co.uk [194.105.64.74]) by hub.freebsd.org (Postfix) with ESMTP id C959714C1F for ; Wed, 6 Oct 1999 00:18:53 -0700 (PDT) (envelope-from didds@freenet.uk.com) Received: from freenet.uk.com ([194.105.64.191]) by netgates.co.uk (8.7.5/8.x.x) with ESMTP id IAA00615 for ; Wed, 6 Oct 1999 08:18:48 +0100 (BST) Message-ID: <37FAE9CC.E1C4A2F4@freenet.uk.com> Date: Wed, 06 Oct 1999 07:18:52 +0100 From: Ian Diddams X-Mailer: Mozilla 4.61 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 Cc: "freebsd-questions@freebsd.org" Subject: Re: More sound blaster 16 References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Kenneth Wayne Culver wrote: > HAve you done a MAKEDEV snd0 in /dev? do this: natch. No sound still though. Didds To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:20: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Michelle.esfm.ipn.mx (Michelle.esfm.ipn.mx [148.204.104.23]) by hub.freebsd.org (Postfix) with ESMTP id 4635914C1F for ; Wed, 6 Oct 1999 00:19:48 -0700 (PDT) (envelope-from mrspock@esfm.ipn.mx) Received: from localhost (mrspock@localhost) by Michelle.esfm.ipn.mx (8.9.3/8.9.1) with ESMTP id CAA19347 for ; Wed, 6 Oct 1999 02:21:02 -0500 (CDT) (envelope-from mrspock@esfm.ipn.mx) X-Authentication-Warning: Michelle.esfm.ipn.mx: mrspock owned process doing -bs Date: Wed, 6 Oct 1999 02:21:02 -0500 (CDT) From: Eduardo Viruena Silva To: freebsd-questions@freebsd.org Subject: ioctl must not be used in kernel... then what??!!! Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, while compiling midi drivers for tclmidi, I had to compile the whole kernel according to README.freebsd in source files for tclmidi-3.1. when I tried to buid the new kernel, I received this message: "Don't #include ioctl.h in the kernel. Include xxxio.h instead" WHERE MAY I FIND xxxio.h ???? is "xxxio.h" some kind of abreviation for some other files with sufix: io.h ?? thank you in advance. - ______ _ * / /###\ / \ __ /\ /\ * / ./#### \ * \__|_/ | | / \/ \ | b#####| * _ | __ | | __ = .. \____ \ \_\#####/ / \| / \ | | /\_\/ = \_| * \___\###/ * \_/\_/\__/\__\/_/\__/ = \______/ _ | | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:32:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from storm.FreeBSD.org.uk (storm.freebsd.org.uk [194.242.128.198]) by hub.freebsd.org (Postfix) with ESMTP id 4215014C49 for ; Wed, 6 Oct 1999 00:32:51 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@localhost [127.0.0.1]) by storm.FreeBSD.org.uk (8.9.3/8.9.3) with ESMTP id IAA36391; Wed, 6 Oct 1999 08:32:50 +0100 (BST) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id IAA14843; Wed, 6 Oct 1999 08:33:35 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910060733.IAA14843@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Doug Cc: Drew C Morone , freebsd-questions@FreeBSD.ORG Subject: Re: syslogd questions In-reply-to: Your message of "Tue, 05 Oct 1999 15:47:12 PDT." Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 06 Oct 1999 08:33:34 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > On Tue, 5 Oct 1999, Drew C Morone wrote: > > > What can I do to get ipfw from logging to /var/log/messages? > > I have added > > !ipfw > > *.* /var/log/ipfw > > > > but now it logs to both files. > > Have you tried what the syslog.conf man page talks about inre the > .none facility? That doesn't help here - I think what we really want in syslog.conf is the ability to specify !prog.level as an alternative to facility.level. Then we could say something like !prog.none. Maybe ``!'' isn't a good character here... It's meant to indicate that a program follows, and not as a logical NOT. > Doug > -- > "Stop it, I'm gettin' misty." > > - Mel Gibson as Porter, "Payback" -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:42:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netvisor.hu (mmtp89.mit.bme.hu [152.66.81.169]) by hub.freebsd.org (Postfix) with ESMTP id 9191A14CB5 for ; Wed, 6 Oct 1999 00:42:21 -0700 (PDT) (envelope-from szoli@netvisor.hu) Received: from localhost (szoli@localhost) by netvisor.hu (8.8.7/8.8.7) with ESMTP id JAA15890 for ; Wed, 6 Oct 1999 09:42:34 +0200 Date: Wed, 6 Oct 1999 09:42:17 +0200 (CEST) From: Sebestyen Zoltan X-Sender: szoli@linux.intranet.netvisor.hu To: FreeBSD questions mailinglist Subject: Question: what is /dev/rda0a? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, =20 If just found the description of how to boot a BSD from NT in the FAQ. It requires of copying the first [boot] sector of BSD native partition into a file: dd if=3D/dev/rda0a of=3D/tmp/bootsect.bsd bs=3D512 count=3D1 I don't have no rda0a device configured.. I'd like to know from which device shall I copy the boot sector. My root partition resides on /dev/wd0s2a. Is that device I shall copy the bootsector from? =09Thanks ---------------------------------------------------------------------------= ----- Sebesty=E9n Zolt=E1n =09There was a time when all on my = mind=20 =09=09=09=09=09was love. MAKE INSTALL NOT WAR=09=09=09Now I find that most of the time =09=09=09=09=09love's not enough in itself. =20 The box said: "Windows 95, Windows NT 4 OR BETTER", so I installed FreeBSD= =2E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:42:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailgw02.execpc.com (mailgw02.execpc.com [169.207.3.78]) by hub.freebsd.org (Postfix) with ESMTP id 6EB7014CB5 for ; Wed, 6 Oct 1999 00:42:40 -0700 (PDT) (envelope-from huppe@execpc.com) Received: from execpc.com (jaresh-2-104.mdm.mdx.execpc.com [169.207.193.232]) by mailgw02.execpc.com (8.9.1) id CAA31084; Wed, 6 Oct 1999 02:41:43 -0500 Message-ID: <37FAFD5D.A208592C@execpc.com> Date: Wed, 06 Oct 1999 02:42:21 -0500 From: Len Huppe X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Kevin Libutsi Cc: freebsd-questions@freebsd.org Subject: Re: i would like to get a book about free bsd? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG There is exactly one book on the subject and it's called The Complete FreeBSD. It was authored by Greg Lehey, and he did a great job. You can order a copy at http://www.freebsdmall.com/books. This book is a must have for anyone that's serious about using FreeBSD. There is also the FreeBSD Power Pak which you you can order at http://www.freebsdmall.com/software. Last but not least, there is this mailing list. I have three months worth of messages stored on my system that I search through when I have questions. There are a multitude of answers in there. Welcome to FreeBSD Len Huppe Kevin Libutsi wrote: > i would like to get a book containg EVERYTING about FreeBSD. > I saw it in a store but told me to e-mail you people to find out if you > would sell it. It is a book containing commands and step-by-step > instructions on how to use it. Can you please tell me where to get it. > > Thank You > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:44:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from school.cs.indiana.edu (school.cs.indiana.edu [129.79.252.113]) by hub.freebsd.org (Postfix) with ESMTP id C03DB14CB9 for ; Wed, 6 Oct 1999 00:44:32 -0700 (PDT) (envelope-from jiachen@cs.indiana.edu) Received: from localhost (jiachen@localhost) by school.cs.indiana.edu (8.9.3/8.9.3/IUCS_2.28) with ESMTP id CAA05818 for ; Wed, 6 Oct 1999 02:44:31 -0500 (EST) X-Authentication-Warning: school.cs.indiana.edu: jiachen owned process doing -bs Date: Wed, 6 Oct 1999 02:44:31 -0500 (EST) From: Jia-Huang Chen To: freebsd-questions@FreeBSD.ORG Subject: Problem with Mergemaster Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG When I try to run mergemaster v1.36, it comes with these: but I do have the directory, /usr/src/etc/ Any help ? Thanks, Jia ------------------------------------------------------------------------ [root@nugget:/tmp] # ./mergemaster *** Your PAGER environment variable specifies 'more', but I cannot execute it. In general it is good practice to specify the full path for environment variables like PAGER and EDITOR. Meanwhile, what would you like to do? Use 'e' to exit mergemaster and fix your PAGER variable Use 'm' to use plain old 'more' as your PAGER for this run Default is to use plain old 'more' What should I do? [Use 'more'] *** The directory specified for the temporary root environment, /var/tmp/temproot, exists. This can be a security risk if untrusted users have access to the system. Use 'd' to delete the old /var/tmp/temproot and continue Use 't' to select a new temporary root directory Use 'e' to exit mergemaster Default is to use /var/tmp/temproot as is How should I deal with this? [Use the existing /var/tmp/temproot] *** Leaving /var/tmp/temproot intact *** Creating the temporary root environment in /var/tmp/temproot *** /var/tmp/temproot ready for use *** Creating and populating directory structure in /var/tmp/temproot make: don't know how to make distrib-dirs. Stop *** FATAL ERROR: Cannot 'cd' to /usr/src/etc and install files to the temproot environment [root@nugget:/tmp] # ------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:50:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from we-24-130-42-154.we.mediaone.net (we-24-130-42-154.we.mediaone.net [24.130.42.154]) by hub.freebsd.org (Postfix) with ESMTP id 6F63B14CB9 for ; Wed, 6 Oct 1999 00:50:29 -0700 (PDT) (envelope-from obrien@leonardo.net) Received: from mobrien.ni.net (localhost [127.0.0.1]) by we-24-130-42-154.we.mediaone.net (8.9.2/8.9.2) with ESMTP id AAA00425 for ; Wed, 6 Oct 1999 00:50:44 -0700 (PDT) (envelope-from obrien@leonardo.net) Message-Id: <199910060750.AAA00425@we-24-130-42-154.we.mediaone.net> To: freebsd-questions@freebsd.org Subject: Netscape vs. Slashdot vs. FreeBSD Date: Wed, 06 Oct 1999 00:50:44 -0700 From: "Mike O'Brien" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ok, this may sound off-the-wall, but lately, Netscape 4.07 and the new Netscape 4.7 both dump core very quickly as soon as they try to do anything on Slashdot...but only on FreeBSD (3.1 at the moment). Netscape on Windows (yurgh) works fine, Netscape on Solaris works fine. Is anyone else seeing this? Mike O'Brien obrien@leonardo.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:52: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id D6A9414D3A for ; Wed, 6 Oct 1999 00:51:59 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id BAA08652; Wed, 6 Oct 1999 01:10:49 -0700 (PDT) Date: Wed, 6 Oct 1999 01:10:48 -0700 (PDT) From: Alfred Perlstein To: Jamie Norwood Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tracking down causes of crashes In-Reply-To: <19991005141614.A92820@mushhaven.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Jamie Norwood wrote: > > All, > > I am running (From uname -a): > > FreeBSD diarmadhi.mushhaven.net 3.2-STABLE FreeBSD 3.2-STABLE #2: Sun Aug > 8 12:09:11 GMT 1999 root@:/usr/src/sys/compile/DIARMADHI i386 > > Now, I am running an Abit dual socket 370 mainboard with 2 Celeron 500 > CPU's. All work fine under low load, but should I raise the load (Say > by running Seti@Home, within 2 hours it just freezes up. Are you over clocking these celerons? -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 0:58:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id D13BA14D72 for ; Wed, 6 Oct 1999 00:58:17 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id BAA08772; Wed, 6 Oct 1999 01:17:07 -0700 (PDT) Date: Wed, 6 Oct 1999 01:17:07 -0700 (PDT) From: Alfred Perlstein To: "Ian J. Brown" Cc: questions@FreeBSD.ORG Subject: Re: PPP over Ethernet Driver In-Reply-To: <37FA4659.F1E94CE7@on.bell.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Ian J. Brown wrote: > My ISP just converted over to running PPP over Ethernet on my ADSL line > and I've lost my connection to the Internet since my FreeBSD machine > doesn't appear to have a driver that supports "PPP over Ethernet". > > Does FreeBSD have a driver that supports "PPP over Ethernet" yet? Unfortunately not yet, but there is active work in progress by some very skilled individuals. You can probably expect something real soon now. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 1: 0:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 333EB15019 for ; Wed, 6 Oct 1999 00:59:25 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id BAA08777; Wed, 6 Oct 1999 01:18:13 -0700 (PDT) Date: Wed, 6 Oct 1999 01:18:13 -0700 (PDT) From: Alfred Perlstein To: Jeffrey Bernt Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Sniffer info... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Jeffrey Bernt wrote: > Hello. > Quick question. I run a few computers on a network at college, and was > wondering if there is any way to protect against a password sniffer? I ran > the sniff program in the ports collection and was surprised what information > I could collect =) What are my options to protect myself as well as the data > I send and recieve? > Any clues to this puzzle would be awesome. check out /usr/ports/security, in particular ssh, secure shell, it allows encrypted log on without your password being sent over in plain-text. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 1: 6:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id D8CC014DC6 for ; Wed, 6 Oct 1999 01:06:32 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id RAA82161; Wed, 6 Oct 1999 17:35:40 +0930 (CST) Date: Wed, 6 Oct 1999 17:35:40 +0930 From: Greg Lehey To: "Mike O'Brien" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Netscape vs. Slashdot vs. FreeBSD Message-ID: <19991006173540.N78191@freebie.lemis.com> References: <199910060750.AAA00425@we-24-130-42-154.we.mediaone.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <199910060750.AAA00425@we-24-130-42-154.we.mediaone.net> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wednesday, 6 October 1999 at 0:50:44 -0700, Mike O'Brien wrote: > Ok, this may sound off-the-wall, but lately, Netscape 4.07 > and the new Netscape 4.7 both dump core very quickly as soon as > they try to do anything on Slashdot...but only on FreeBSD (3.1 at > the moment). Netscape on Windows (yurgh) works fine, Netscape on > Solaris works fine. > > Is anyone else seeing this? I've seen a lot of cases of Netscrape dying, but I can read this one fine. This is 4.61. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 1:43:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.ihug.com.au (smtp2.ihug.com.au [203.109.250.51]) by hub.freebsd.org (Postfix) with ESMTP id EFFAA14CEF for ; Wed, 6 Oct 1999 01:43:38 -0700 (PDT) (envelope-from alanr@tig.com.au) Received: from tig.com.au (p2-max27.syd.ihug.com.au [206.17.109.194]) by smtp2.ihug.com.au (8.9.3/8.9.3) with ESMTP id SAA12517 for ; Wed, 6 Oct 1999 18:43:32 +1000 Message-ID: <37FB0BA5.DA5CCA5C@tig.com.au> Date: Wed, 06 Oct 1999 18:43:17 +1000 From: alanr X-Mailer: Mozilla 4.61 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Borland Builder Survey References: <37FA498B.9961B7EB@jorsm.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Since someone asked about alternatives to gnu c compiler a few weeks back, have folk completed the Borland C++ survey over at the borland site? I submitted the link to the daemonnews daily news site, but not everyone might have seen it. While it's probly aimed at the linux folk, you can actually indicate which o/s you plan to develop on some of the questions - if enough folk say they want to develop on FreeBSD - who knows.... I'm assuming here too that a native version would allow compilation of the kernel etc. Alan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 1:55:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail0.u-aizu.ac.jp (mail0.u-aizu.ac.jp [163.143.1.43]) by hub.freebsd.org (Postfix) with ESMTP id EA24B14D9C for ; Wed, 6 Oct 1999 01:55:22 -0700 (PDT) (envelope-from sarikaya@u-aizu.ac.jp) Received: from pross114.u-aizu.ac.jp (pross114 [163.143.180.102]) by mail0.u-aizu.ac.jp (8.9.3+3.1W/3.7Winternet-gw) with ESMTP id RAA21799; Wed, 6 Oct 1999 17:55:19 +0900 (JST) Received: from u-aizu.ac.jp (localhost [127.0.0.1]) by pross114.u-aizu.ac.jp (8.9.3+3.1W/3.7Wistcmx+kanji) with ESMTP id RAA07023; Wed, 6 Oct 1999 17:55:19 +0900 (JST) Message-ID: <37FB0E76.8F45ADDD@u-aizu.ac.jp> Date: Wed, 06 Oct 1999 17:55:19 +0900 From: Behcet Sarikaya Organization: University of Aizu X-Mailer: Mozilla 4.61 [en] (X11; I; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: luigi@iet.unipi.it, freebsd-questions@FreeBSD.org Subject: Sound Card pcm driver config problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am using the pcm driver to configure my Crystal CS4237 card. I can not play CD. I did /dev/MAKEDEV snd2 When I do cat monkey.au >/dev/audio I got it played two times and then sometimes it stops with this message: timeout flushing dbuf_out, chan 1 cnt 0xffeb8e48 flags 0x000002c1 Applications like rat recognize CS4237 but no sound. Thanks for your help in advance, / Behcet Sarikaya Kernel configuration file: controller pnp0 device pcm1 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr dmesg output: FreeBSD 3.2-RELEASE #19: Wed Oct 6 16:23:21 JST 1999 sarikaya@dellcom5.u-aizu.ac.jp:/usr/project/V6/sys/compile/DELLCOM5 FreeBSD Kernel Configuration Utility - Version 1.2 Type "help" for help or "visual" to go to the visual configuration interface (requires MGA/VGA display or serial terminal capable of displaying ANSI graphics). config> pnp 1 0 os enable port0 0x534 port2 0x220 irq0 5 drq0 1 drq1 3 config> quit Probing for PnP devices: CSN 1 Vendor ID: CSCd937 [0x37d9630e] Serial 0xffffffff Comp ID: @@@0000 [0x0000 0000] mss_attach 2 at 0x530 irq 5 dma 1:3 flags 0x13 pcm2 (CS423x/Yamaha/AD1816 sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 fl ags 0x13 on isa pnpinfo command output:Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CSCd937 (0x37d9630e), Serial Number 0xffffffff PnP Version 1.0, Vendor Version 1 Device Description: AW35/Pro (Resource R2.2-D7) Logical Device ID: CSC0000 0x0000630e #0 Device Description: WSS/SB TAG Start DF Good Configuration DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Type A DMA: channel(s) 0 3 8-bit, not a bus master, count by byte, , Type A IRQ: 5 - only one type (true/edge) I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10 [16-bit addr] Acceptable Configuration DMA: channel(s) 1 3 8-bit, not a bus master, count by byte, , Type A DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type A IRQ: 5 7 9 11 12 15 - only one type (true/edge) I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Type A IRQ: 5 7 9 11 12 15 - only one type (true/edge) I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4 [16-bit addr] I/O Range 0x388 .. 0x3f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CSC0001 0x0100630e #1 Device Description: GAME TAG Start DF Good Configuration I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8 [16-bit addr] TAG Start DF Acceptable Configuration I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8 [16-bit addr] TAG End DF Logical Device ID: CSC0010 0x1000630e #2 Device Description: CTRL I/O Range 0x120 .. 0xff8, alignment 0x8, len 0x8 [16-bit addr] Logical Device ID: CSC0003 0x0300630e #3 Device Description: MPU TAG Start DF Good Configuration IRQ: 9 - only one type (true/edge) I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 9 11 12 15 - only one type (true/edge) I/O Range 0x330 .. 0x360, alignment 0x8, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration I/O Range 0x330 .. 0x3e0, alignment 0x8, len 0x2 [16-bit addr] TAG End DF End Tag Successfully got 46 resources, 4 logical fdevs -- card select # 0x0001 CSN CSCd937 (0x37d9630e), Serial Number 0xffffffff Logical device #0 IO: 0x0534 0x0000 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 3 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 Logical device #2 IO: 0x0120 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0338 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 11 0 DMA 4 4 IO range check 0x00 activate 0x01 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2: 6:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dante.high5.net (dante.high5.net [194.134.79.4]) by hub.freebsd.org (Postfix) with ESMTP id 24CE414C31; Wed, 6 Oct 1999 02:04:43 -0700 (PDT) (envelope-from mischa@dante.high5.net) Received: (from mischa@localhost) by dante.high5.net (8.9.3/8.9.2) id LAA68976; Wed, 6 Oct 1999 11:04:42 +0200 (CEST) (envelope-from mischa) Date: Wed, 6 Oct 1999 11:04:42 +0200 From: Mischa To: freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: pidentd not working on 3.3-STABLE Message-ID: <19991006110442.M63758@high5.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi All, Since a couple of days I have upgraded my 3.2-RELEASE machine to 3.3-STABLE and now pidentd is no longer working. As in it does get started but for some reason it doesn't give back an ident. I got all the STABLE sources, ran make buildworld and make installworld. Recompiled my kernel and rebooted. The /etc/inetd.conf is still the same (uncommented the standard line for identd). After that I have reinstalled pidentd, made sure that all the includes where working (reinstalled them, just to be sure). Added -l -d to identd in the inetd.conf (didn't produce antything in the syslog). Made a trace with ktrace which didn't do anything wierd. Did a telnet to port 113 and and tried to get user info from there, but the standard response was NO-USER. Is anybody experiencing the same problems, or did I miss something completly obvious? Thanx! Mischa PS: I also have a 3.2-STABLE machine running pidentd without any problems. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:15:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from shell.arpa-canada.net (shell.arpa-canada.net [209.104.122.2]) by hub.freebsd.org (Postfix) with ESMTP id 363FC14C31 for ; Wed, 6 Oct 1999 02:15:08 -0700 (PDT) (envelope-from matt@BabCom.ORG) Received: by shell.arpa-canada.net (Postfix, from userid 1001) id E4562B885; Wed, 6 Oct 1999 05:14:07 -0400 (EDT) Received: from localhost (localhost [127.0.0.1]) by shell.arpa-canada.net (Postfix) with ESMTP id DE1D9B; Wed, 6 Oct 1999 05:14:07 -0400 (EDT) Date: Wed, 6 Oct 1999 05:14:07 -0400 (EDT) From: matt X-Sender: matt@shell.arpa-canada.net To: Mischa Cc: freebsd-questions@freebsd.org Subject: Re: pidentd not working on 3.3-STABLE In-Reply-To: <19991006110442.M63758@high5.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I'm not sure what to tell you exactly, I need more information on your setup. I can verify however that pidentd works absolutely fine on my 3.3-STABLE machines, which were upgraded without a hitch to 3.2-STABLE. I doubt that it is a freebsd bug in either, but one never knows. Could you perhaps e-mail me privately with your inetd.conf file and any other information, I would be better equipped to help you. Thanks. // Matt On Wed, 6 Oct 1999, Mischa wrote: : Hi All, : : Since a couple of days I have upgraded my 3.2-RELEASE machine to 3.3-STABLE : and now pidentd is no longer working. As in it does get started but for some : reason it doesn't give back an ident. : : I got all the STABLE sources, ran make buildworld and make installworld. : Recompiled my kernel and rebooted. The /etc/inetd.conf is still the same : (uncommented the standard line for identd). : : After that I have reinstalled pidentd, made sure that all the includes where : working (reinstalled them, just to be sure). Added -l -d to identd in the : inetd.conf (didn't produce antything in the syslog). Made a trace with : ktrace which didn't do anything wierd. : : Did a telnet to port 113 and and tried to get user info from there, but the : standard response was NO-USER. : : Is anybody experiencing the same problems, or did I miss something completly : obvious? : : Thanx! : : Mischa : : PS: I also have a 3.2-STABLE machine running pidentd without any problems. : : : To Unsubscribe: send mail to majordomo@FreeBSD.org : with "unsubscribe freebsd-stable" in the body of the message : -- "You know, I used to think it was awful that life was so unfair. Then I thought, wouldn't it be much worse if life were fair, and all the terrible things that happen to us come because we actually deserve them? So, now I take great comfort in the general hostility and unfairness of the universe." - Marcus Cole, Babylon 5 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:16:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id 5505214C31 for ; Wed, 6 Oct 1999 02:16:49 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.253]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA69AF; Wed, 6 Oct 1999 11:15:43 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id LAA10859; Wed, 6 Oct 1999 11:16:26 +0200 (CEST) (envelope-from asmodai) Date: Wed, 6 Oct 1999 11:16:26 +0200 From: Jeroen Ruigrok/Asmodai To: Richard Morte Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: NSLINT and DNS configuration Message-ID: <19991006111626.G8987@daemon.ninth-circle.org> References: <37F74CBD.FE1EE27D@sinclairassoc.force9.co.uk> <19991004000040.F35757@daemon.ninth-circle.org> <37FA71C4.941239AF@sinclairassoc.force9.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37FA71C4.941239AF@sinclairassoc.force9.co.uk> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991005 23:56], Richard Morte (ric@sinclairassoc.force9.co.uk) wrote: >Jeroen, > >Many thanks for your reply. Yes DNS was not properly configured. I had >used the outline from Chapter 4 in the DNS/BIND book and made a couple >of errors. However, my final configuration differs from yours in that I >already had a zone for 0.0.127.in-addr.arpa which referenced the file >db127.0.0 > >db.127.0.0 contained: >@ IN SOA sparky.at.home. root.sparky.at.home. ( > ) > IN NS sparky.at.home > >1 In PTR localhost. > ^ >I changed it to localhost (ie, 'localhost.at.home.') and nslint no >longer reported any errors. Your solution interests me. If I had created >an additional master zone for 1.0.0.127.in-addr.arpa it would presumably >have overlapped the existing zone for 0.0.127.etc.etc and created a >duplicate. I don't know if this would still have been OK, but it's the >first time I've seen an example of a zone created specifically for a >single address; ie, 1.0.0.127 as opposed to 0.0.127. Is this common? Well, the db.127.0.0.1 I had I changed back to db.127.0.0 as well as 0.0.127.in-addr.arpa. I read some more again on the localhost since that evaded me since I first started to use DNS servers. If you have DNS & BIND, read pg. 67, the loopback address [3rd edition] In short is says: db.127.0.0: 0.0.127.in-addr.arpa IN NS host.domain.tld. 0.0.127.in-addr.arpa IN NS anotherhost.domain.tld. 1.0.0.127.in-addr.arpa IN PTR localhost. HTH, it helped me ;) -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Imitation is the sincerest of flattery. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:17:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from wop21.wop.wtb.tue.nl (wop21.wop.wtb.tue.nl [131.155.56.216]) by hub.freebsd.org (Postfix) with ESMTP id 45C8A14D1F for ; Wed, 6 Oct 1999 02:17:18 -0700 (PDT) (envelope-from karelj@wop21.wop.wtb.tue.nl) Received: (from karelj@localhost) by wop21.wop.wtb.tue.nl (8.9.3/8.9.3) id LAA13854; Wed, 6 Oct 1999 11:18:15 +0200 (CEST) (envelope-from karelj) Date: Wed, 6 Oct 1999 11:18:15 +0200 From: Karel Joop Bosschaart To: "Liotta, Bob" , freebsd-questions@freebsd.org Subject: Re: Staroffice Message-ID: <19991006111815.B13537@wop21.wop.wtb.tue.nl> Reply-To: K.J.Bosschaart@wtb.tue.nl References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, Oct 05, 1999 at 05:51:13PM -0400, Liotta, Bob wrote: > Good afternoon, > > Has anyone successfully installed Sun's Staroffice(Linux Version) on > FreeBSD 3.2 > If you have, could you drop me some hints? > > I am getting stuck on setup. Lib problems. I think I installed all of > the Linux stuff. > Other linux stuff works. > > Any help would be appreciated. http://www.serv.net/~mcglk/staroffice-install.html might help you. Good luck, Karel. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:33:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from labinfo.iet.unipi.it (labinfo.iet.unipi.it [131.114.9.5]) by hub.freebsd.org (Postfix) with SMTP id EBD2114CB3 for ; Wed, 6 Oct 1999 02:33:02 -0700 (PDT) (envelope-from luigi@labinfo.iet.unipi.it) Received: from localhost (luigi@localhost) by labinfo.iet.unipi.it (8.6.5/8.6.5) id LAA12703; Wed, 6 Oct 1999 11:35:36 +0100 From: Luigi Rizzo Message-Id: <199910061035.LAA12703@labinfo.iet.unipi.it> Subject: Re: Sound Card pcm driver config problem To: sarikaya@u-aizu.ac.jp (Behcet Sarikaya) Date: Wed, 6 Oct 1999 11:35:36 +0100 (MET) Cc: luigi@iet.unipi.it, freebsd-questions@FreeBSD.org In-Reply-To: <37FB0E76.8F45ADDD@u-aizu.ac.jp> from "Behcet Sarikaya" at Oct 6, 99 05:55:00 pm X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 5014 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "sounds" as a dma problem. I would check your system to make sure that other peripherals (e.g. the parallel port) are not using DRQ1, and also the bios setting to make sure that DRQ1 and 3 are assigned to the PnP card(s). cheers luigi interrupt line, and also "> > I am using the pcm driver to configure my Crystal CS4237 card. I can not > play CD. > I did > /dev/MAKEDEV snd2 > When I do > cat monkey.au >/dev/audio > I got it played two times and then sometimes it stops with this message: > > timeout flushing dbuf_out, chan 1 cnt 0xffeb8e48 flags 0x000002c1 > Applications like rat recognize CS4237 but no sound. > Thanks for your help in advance, > > / Behcet Sarikaya > > Kernel configuration file: > > controller pnp0 > > device pcm1 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr > > dmesg output: > > FreeBSD 3.2-RELEASE #19: Wed Oct 6 16:23:21 JST 1999 > sarikaya@dellcom5.u-aizu.ac.jp:/usr/project/V6/sys/compile/DELLCOM5 > > FreeBSD Kernel Configuration Utility - Version 1.2 > Type "help" for help or "visual" to go to the visual > configuration interface (requires MGA/VGA display or > serial terminal capable of displaying ANSI graphics). > config> pnp 1 0 os enable port0 0x534 port2 0x220 irq0 5 drq0 1 drq1 3 > config> quit > Probing for PnP devices: > CSN 1 Vendor ID: CSCd937 [0x37d9630e] Serial 0xffffffff Comp ID: @@@0000 [0x0000 > 0000] > mss_attach 2 at 0x530 irq 5 dma 1:3 flags 0x13 > pcm2 (CS423x/Yamaha/AD1816 sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 fl > ags 0x13 on isa > > pnpinfo command output:Checking for Plug-n-Play devices... > > Card assigned CSN #1 > Vendor ID CSCd937 (0x37d9630e), Serial Number 0xffffffff > PnP Version 1.0, Vendor Version 1 > Device Description: AW35/Pro (Resource R2.2-D7) > > Logical Device ID: CSC0000 0x0000630e #0 > Device Description: WSS/SB > TAG Start DF > Good Configuration > DMA: channel(s) 1 > 8-bit, not a bus master, count by byte, , Type A > DMA: channel(s) 0 3 > 8-bit, not a bus master, count by byte, , Type A > IRQ: 5 - only one type (true/edge) > I/O Range 0x534 .. 0x534, alignment 0x4, len 0x4 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8 > [16-bit addr] > I/O Range 0x220 .. 0x220, alignment 0x20, len 0x10 > [16-bit addr] > Acceptable Configuration > DMA: channel(s) 1 3 > 8-bit, not a bus master, count by byte, , Type A > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Type A > IRQ: 5 7 9 11 12 15 - only one type (true/edge) > I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x8, len 0x8 > [16-bit addr] > I/O Range 0x220 .. 0x260, alignment 0x20, len 0x10 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Type A > IRQ: 5 7 9 11 12 15 - only one type (true/edge) > I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4 > [16-bit addr] > I/O Range 0x388 .. 0x3f8, alignment 0x8, len 0x8 > [16-bit addr] > I/O Range 0x220 .. 0x300, alignment 0x20, len 0x10 > [16-bit addr] > TAG End DF > > Logical Device ID: CSC0001 0x0100630e #1 > Device Description: GAME > TAG Start DF > Good Configuration > I/O Range 0x200 .. 0x200, alignment 0x8, len 0x8 > [16-bit addr] > TAG Start DF > Acceptable Configuration > I/O Range 0x208 .. 0x208, alignment 0x8, len 0x8 > [16-bit addr] > TAG End DF > > Logical Device ID: CSC0010 0x1000630e #2 > Device Description: CTRL > I/O Range 0x120 .. 0xff8, alignment 0x8, len 0x8 > [16-bit addr] > > Logical Device ID: CSC0003 0x0300630e #3 > Device Description: MPU > TAG Start DF > Good Configuration IRQ: 9 - only one type (true/edge) > I/O Range 0x330 .. 0x330, alignment 0x8, len 0x2 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 9 11 12 15 - only one type (true/edge) > I/O Range 0x330 .. 0x360, alignment 0x8, len 0x2 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > I/O Range 0x330 .. 0x3e0, alignment 0x8, len 0x2 > [16-bit addr] > TAG End DF > End Tag > > Successfully got 46 resources, 4 logical fdevs > -- card select # 0x0001 > > CSN CSCd937 (0x37d9630e), Serial Number 0xffffffff > > Logical device #0 > IO: 0x0534 0x0000 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 5 0 > DMA 1 3 > IO range check 0x00 activate 0x01 > > Logical device #1 > IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x00 > > Logical device #2 > IO: 0x0120 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > Logical device #3 > IO: 0x0338 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 11 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:45:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 4BAED150AF for ; Wed, 6 Oct 1999 02:45:22 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YncL-0007NP-00; Wed, 06 Oct 1999 11:44:13 +0200 From: Sheldon Hearn To: liang@ems.guangzhou.gd.cn Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Does 3.3-release support CallBack? In-reply-to: Your message of "Wed, 06 Oct 1999 08:48:04 +0800." Date: Wed, 06 Oct 1999 11:44:13 +0200 Message-ID: <28358.939203053@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 08:48:04 +0800, liang@ems.guangzhou.gd.cn wrote: > Could you please tell me if 3.3-release supports Callback when connecting > to internet using a modam? This is what the ppp(8) manpage says: Supports client callback. ppp can use either the standard LCP callback protocol or the Microsoft CallBack Control Protocol (ftp://ftp.mi- crosoft.com/developr/rfc/cbcp.txt). So the answer to your first questions is yes. > And, When I install 3.3-release, I want to use Callback too, is it > supported too? Out of the box, I doubt that you'll be able to _install_ using ppp callback. Once you've got FreeBSD installed, the story changes. :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:50: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id C2C2F14A0A for ; Wed, 6 Oct 1999 02:50:01 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YnfY-0007OE-00; Wed, 06 Oct 1999 11:47:32 +0200 From: Sheldon Hearn To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: AbiWord In-reply-to: Your message of "Wed, 06 Oct 1999 05:17:13 +0100." Date: Wed, 06 Oct 1999 11:47:32 +0200 Message-ID: <28409.939203252@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 05:17:13 +0100, J McKitrick wrote: > Well, i figured out the font problem. But has anyone had any other > problems with AbiWord? Every time i hit SPACE, the last menu i accessed > drops down. And there was a core dump when i exited. Has anyone seen > this? The pkg/DESCR files of many ports offer a URL for the package's home page. Abiword is one of these ports. Its pkg/DESCR contains the following home page: http://www.abisource.com/ That page has an FAQ link and their Products link provides information about mailing lists. Good luck! Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:50:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feldspato.ist.utl.pt (feldspato.ist.utl.pt [193.136.143.16]) by hub.freebsd.org (Postfix) with ESMTP id D0C1A14A0A for ; Wed, 6 Oct 1999 02:50:20 -0700 (PDT) (envelope-from wlan@feldspato.ist.utl.pt) Received: from localhost (wlan@localhost) by feldspato.ist.utl.pt (8.9.1/8.9.1) with ESMTP id KAA01579; Wed, 6 Oct 1999 10:48:31 +0100 Date: Wed, 6 Oct 1999 10:48:31 +0100 (WEST) From: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" To: freebsd-questions@FreeBSD.ORG Subject: Inactive memory Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello all Is there a way to turn inactive memory into free memory in freeBSD 3.2. ? I have 512MB of RAM but a significant part (300MB) is only reported as free for a few hours after a reboot, then it becomes "inactive". I think that's why we have a slow system, specially with regard to Pine that takes for ever to close/open a large mailbox, because it spends a lot of time allocating memory (during that time the systems becomes very slow)... Here's the first lines of 'top': last pid: 50917; load averages: 0.03, 0.03, 0.00 up 1+21:35:32 10:46:50 94 processes: 1 running, 93 sleeping CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle Mem: 32M Active, 419M Inact, 26M Wired, 14M Cache, 8265K Buf, 11M Free Swap: 964M Total, 964M Free Any suggestions, hints ? Thanks, Joao Pagaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:51:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netgates.co.uk (macmail.netgates.co.uk [194.105.64.74]) by hub.freebsd.org (Postfix) with ESMTP id 58FDC14A0A for ; Wed, 6 Oct 1999 02:51:23 -0700 (PDT) (envelope-from didds@freenet.uk.com) Received: from freenet.uk.com (saul.netgates.co.uk [194.105.64.199]) by netgates.co.uk (8.7.5/8.x.x) with ESMTP id KAA04554 for ; Wed, 6 Oct 1999 10:51:19 +0100 (BST) Message-ID: <37FB1B9A.9528C984@freenet.uk.com> Date: Wed, 06 Oct 1999 10:51:22 +0100 From: Ian Diddams X-Mailer: Mozilla 4.51 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Reading MS Word files References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Darren Foo wrote: > > > Are there any programs available for Windows that would serve as a > > X-server? I want to read MS Word and Office documents but MS support > > under unix has been lacking. I might be missing Darren's point here but doesn't Star Office support MS format files ie can read Word, Excell etc files? And allegedly has better filters than MS for such stuff? -- Didds To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:54:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 228FE14C4B for ; Wed, 6 Oct 1999 02:54:39 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11Ynlv-0007Rc-00; Wed, 06 Oct 1999 11:54:07 +0200 From: Sheldon Hearn To: Sebestyen Zoltan Cc: FreeBSD questions mailinglist Subject: Re: Question: what is /dev/rda0a? In-reply-to: Your message of "Wed, 06 Oct 1999 09:42:17 +0200." Date: Wed, 06 Oct 1999 11:54:07 +0200 Message-ID: <28619.939203647@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 09:42:17 +0200, Sebestyen Zoltan wrote: > I don't have no rda0a device configured.. I'd like to know from which > device shall I copy the boot sector. My root partition resides on > /dev/wd0s2a. Is that device I shall copy the bootsector from? Almost. :-) the "r" means raw, so you probably want: /dev/rwd0s2a Cia, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 2:58:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 0EA4814C4B for ; Wed, 6 Oct 1999 02:58:15 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11Ynne-0007SF-00; Wed, 06 Oct 1999 11:55:54 +0200 From: Sheldon Hearn To: Jia-Huang Chen Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem with Mergemaster In-reply-to: Your message of "Wed, 06 Oct 1999 02:44:31 EST." Date: Wed, 06 Oct 1999 11:55:54 +0200 Message-ID: <28658.939203754@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 02:44:31 EST, Jia-Huang Chen wrote: > *** The directory specified for the temporary root environment, > /var/tmp/temproot, exists. This can be a security risk if untrusted > users have access to the system. > > Use 'd' to delete the old /var/tmp/temproot and continue > Use 't' to select a new temporary root directory > Use 'e' to exit mergemaster If I were you, I'd choose 'd' here. > *** FATAL ERROR: Cannot 'cd' to /usr/src/etc and install files to the > temproot environment If choosing 'd' to delete /var/tmp/temproot doesn't help, check the permissions on your /usr/src/etc and /var/tmp directories. Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 3: 1:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 920E114F8E for ; Wed, 6 Oct 1999 03:01:24 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11YnsG-0007TM-00; Wed, 06 Oct 1999 12:00:40 +0200 From: Sheldon Hearn To: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Inactive memory In-reply-to: Your message of "Wed, 06 Oct 1999 10:48:31 +0100." Date: Wed, 06 Oct 1999 12:00:40 +0200 Message-ID: <28727.939204040@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 10:48:31 +0100, "TFC WLAN 97/98 - IST - ext.2269 (8418269)" wrote: > I have 512MB of RAM but a significant part (300MB) is only > reported as free for a few hours after a reboot, > then it becomes "inactive". That's a good thing. Inactive pages are those which back objects that used to be referenced by some program but have since been "freed" up. Instead of being marked "free", they're marked "inactive". This is part of the VM system's caching technique. If some process now requires a new reference to those pages, they may not need to be filled from disk. > I think that's why we have a slow system, specially with regard > to Pine that takes for ever to close/open a large mailbox, because it > spends a lot of time allocating memory (during that time the systems > becomes very slow)... No, this isn't why you have a slow system. Pine just sucks at handling large mailboxes. :-) Later, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 3:11:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from implode.root.com (root.com [209.102.106.178]) by hub.freebsd.org (Postfix) with ESMTP id 05EBA14CEF for ; Wed, 6 Oct 1999 03:11:51 -0700 (PDT) (envelope-from dg@implode.root.com) Received: from implode.root.com (localhost [127.0.0.1]) by implode.root.com (8.8.8/8.8.5) with ESMTP id DAA01900; Wed, 6 Oct 1999 03:06:41 -0700 (PDT) Message-Id: <199910061006.DAA01900@implode.root.com> To: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Inactive memory In-reply-to: Your message of "Wed, 06 Oct 1999 10:48:31 BST." From: David Greenman Reply-To: dg@root.com Date: Wed, 06 Oct 1999 03:06:41 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >Is there a way to turn inactive memory into free memory in >freeBSD 3.2. ? > >I have 512MB of RAM but a significant part (300MB) is only >reported as free for a few hours after a reboot, >then it becomes "inactive". > >I think that's why we have a slow system, specially with regard >to Pine that takes for ever to close/open a large mailbox, because it >spends a lot of time allocating memory (during that time the systems >becomes very slow)... > >Here's the first lines of 'top': > >last pid: 50917; load averages: 0.03, 0.03, 0.00 up 1+21:35:32 >10:46:50 >94 processes: 1 running, 93 sleeping >CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% >idle >Mem: 32M Active, 419M Inact, 26M Wired, 14M Cache, 8265K Buf, 11M Free >Swap: 964M Total, 964M Free > > >Any suggestions, hints ? Your system would be a lot slower without inactive memory. Basically what that stat is telling you is that the system was able to use a large amount of otherwise free memory for file caching, speeding up your applications significantly. FreeBSD always tries to retain data that is useful; free pages are just dead, useless pages that contain no useful data. The process of moving pages from the various queues (inactive, cache, etc) to 'free' is very fast and in most cases has almost zero overhead. In short, if your system is slow when running 'pine', then it is for some other reason. -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project - http://www.freebsd.org Creator of high-performance Internet servers - http://www.terasolutions.com Pave the road of life with opportunities. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 3:18:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.mcafee.ru (ns.mcafee.ru [195.91.163.136]) by hub.freebsd.org (Postfix) with ESMTP id E789914E2F for ; Wed, 6 Oct 1999 03:18:37 -0700 (PDT) (envelope-from ilya@ns.mcafee.ru) Received: from trojan.intranet (trojan.intranet [10.0.1.100]) by ns.mcafee.ru (8.9.3/8.9.3) with ESMTP id OAA13425 for ; Wed, 6 Oct 1999 14:18:35 +0400 (MSD) (envelope-from ilya@ns.mcafee.ru) Date: Wed, 6 Oct 1999 14:18:33 +0400 (MSD) From: Ilya Pekshev X-Sender: ilya@trojan.intranet To: freebsd-questions@freebsd.org Subject: traceroute and firewall Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, can you please explain me how do I configure my firewall and natd to translate domain and ip names correctly when running traceroute from behind a firewall. Now I'm getting my firewall name for all hops instead of proper router's names. Thanks, -- Ilya Pekshev Mailto:ilya@associates.ru Associates.RU Ltd. http://www.associates.ru Moscow, Russian Federation Tel: +7 095 202 0607 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 3:28:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail0.u-aizu.ac.jp (mail0.u-aizu.ac.jp [163.143.1.43]) by hub.freebsd.org (Postfix) with ESMTP id 9C17714CD5 for ; Wed, 6 Oct 1999 03:28:30 -0700 (PDT) (envelope-from sarikaya@u-aizu.ac.jp) Received: from pross114.u-aizu.ac.jp (pross114 [163.143.180.102]) by mail0.u-aizu.ac.jp (8.9.3+3.1W/3.7Winternet-gw) with ESMTP id TAA23701; Wed, 6 Oct 1999 19:28:27 +0900 (JST) Received: from u-aizu.ac.jp (localhost [127.0.0.1]) by pross114.u-aizu.ac.jp (8.9.3+3.1W/3.7Wistcmx+kanji) with ESMTP id TAA07107; Wed, 6 Oct 1999 19:28:27 +0900 (JST) Message-ID: <37FB2449.377989C2@u-aizu.ac.jp> Date: Wed, 06 Oct 1999 19:28:26 +0900 From: Behcet Sarikaya Organization: University of Aizu X-Mailer: Mozilla 4.61 [en] (X11; I; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Luigi Rizzo Cc: luigi@iet.unipi.it, freebsd-questions@FreeBSD.org Subject: Re: Sound Card pcm driver config problem References: <199910061035.LAA12703@labinfo.iet.unipi.it> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks, but still can not get it. Using BIOS I disabled the parallel port. I disabled the onboard sound support. I have a quite old Dell Optiplex GMTX whose BIOS does not understand pnp, no way of knowing about drq settings using BIOS, so I set up pnp parameters using boot -c (my previous mail has the setup line I entered). Here is my kernel config file: machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident DELLCOM maxusers 32 options MROUTING options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options "INET6" #IPv6 #options RADISH #not yet #options IPSEC #IP security #options IPSEC_ESP #IP security (crypto; define w/ IPSEC) #options IPSEC_DEBUG #debug for IP security #options NATM #native mode ATM options MAPPED_ADDR_ENABLED options ALTQ #alternate queueing options CBQ #class based queueing options WFQ #weighted fair queueing #options FIFOQ #fifo queueing options RED #random early detection options CBQ_RED #red for cbq #options RIO #twin red for diffserv (needs RED) #options CBQ_RIO #rio for cbq (needs CBQ, RIO, CBQ_RED) #options LOCALQ #local use options ALTQ_ACCOUNT #altq accounting #options ALTQ_ECN #ecn extention to tcp # you might want to set kernel timer to 1kHz if you use CBQ with 100baseT options HZ=1000 options DIFF_SERV options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 #device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device mx0 # Macronix 98713/98715/98725 (``PMAC'') device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 device tl0 # Texas Instruments ThunderLAN device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? device wl0 at isa? port 0x390 net irq 10 vector wlintr pseudo-device loop pseudo-device ether #pseudo-device sl 1 # INET6 unsupported due to no multicast support #pseudo-device ppp 1 # INET6 unsupported due to no multicast support pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip options SYSVSHM options SYSVMSG options SYSVSEM pseudo-device gif 4 pseudo-device dummy 1 device pcm1 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr -------------------------------------------------- Any clues? -- Behcet Sarikaya Computer Communications Lab. The University of Aizu Tsuruga, Ikki-machi, Aizu-wakamatsu City Fukushima, 965-8580 Japan Tel. +81-242-37-2559 Fax. +81-242-37-2742 Home page: http://www.u-aizu.ac.jp/~sarikaya/ email: sarikaya@u-aizu.ac.jp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 3:47:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from labinfo.iet.unipi.it (labinfo.iet.unipi.it [131.114.9.5]) by hub.freebsd.org (Postfix) with SMTP id DDA3014D49 for ; Wed, 6 Oct 1999 03:47:13 -0700 (PDT) (envelope-from luigi@labinfo.iet.unipi.it) Received: from localhost (luigi@localhost) by labinfo.iet.unipi.it (8.6.5/8.6.5) id MAA12931; Wed, 6 Oct 1999 12:50:13 +0100 From: Luigi Rizzo Message-Id: <199910061150.MAA12931@labinfo.iet.unipi.it> Subject: Re: Sound Card pcm driver config problem To: sarikaya@u-aizu.ac.jp (Behcet Sarikaya) Date: Wed, 6 Oct 1999 12:50:13 +0100 (MET) Cc: luigi@iet.unipi.it, freebsd-questions@FreeBSD.org In-Reply-To: <37FB2449.377989C2@u-aizu.ac.jp> from "Behcet Sarikaya" at Oct 6, 99 07:28:07 pm X-Mailer: ELM [version 2.4 PL23] Content-Type: text Content-Length: 604 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Thanks, but still can not get it. > Using BIOS I disabled the parallel port. I disabled the onboard sound > support. I have a quite old Dell Optiplex GMTX whose BIOS does not > understand pnp, no way of knowing about drq settings using BIOS, so I > set up pnp parameters using boot -c (my previous mail has the setup line > I entered). > Here is my kernel config file: too full of stuff! Another thing to check is whether something else is using IRQ5 (irrespective of what the config file says -- those are just hints to the kernel) thus preventing the driver to get the "right" interrupt. luigi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 3:58: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.SAIOS.COM (mail.SAIOS.COM [216.25.35.16]) by hub.freebsd.org (Postfix) with ESMTP id 8F3DB14D49 for ; Wed, 6 Oct 1999 03:57:58 -0700 (PDT) (envelope-from cbri@saios.com) Received: from saios.com [206.48.227.105] by mail.SAIOS.COM with ESMTP (SMTPD32-5.05) id AAED12B3022C; Wed, 06 Oct 1999 06:56:45 -0400 Message-ID: <37FB2BCC.797FA76B@saios.com> Date: Wed, 06 Oct 1999 13:00:28 +0200 From: Cyril Brion X-Mailer: Mozilla 4.07 [en] (WinNT; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: hi bsd'staff Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG here it is my lan config: ntserver4, cisco router, some ntws4, and i would to connect some bsd stations. on my actual bsd (laptop), the 3com 3c509D is correctly detected. i ifconfig it with an ip address A. i add route default to the cisco router. i ping successfully the local ip on the laptop (ping A), but any of the station on the lan. what's happen ? do i forgot something? thanks for the help To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 4: 8:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bla.high5.net (bla.high5.net [194.109.18.218]) by hub.freebsd.org (Postfix) with ESMTP id EB6D0150B8 for ; Wed, 6 Oct 1999 04:08:20 -0700 (PDT) (envelope-from mischa@bla.high5.net) Received: (from mischa@localhost) by bla.high5.net (8.9.3/8.9.3) id NAA00444 for freebsd-questions@freebsd.org; Wed, 6 Oct 1999 13:08:14 +0200 (CEST) (envelope-from mischa) Date: Wed, 6 Oct 1999 13:08:14 +0200 From: Mischa To: freebsd-questions@freebsd.org Subject: more info on pidentd not working on 3.3-STABLE Message-ID: <19991006130814.A423@high5.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I made a new trace and now I did get some usefull information: This is a snippet: "<30>Sep 30 18:45:08 identd[287]: from: 194.109.6.67 ( bilbo.xs4all.nl ) \ for: 1026, 6667" 287 identd RET sendto 87/0x57 287 identd CALL gettimeofday(0xbfbfcb54,0) 287 identd RET gettimeofday 0 287 identd CALL getpid 287 identd RET getpid 287/0x11f 287 identd CALL sendto(0x4,0xbfbfcfb8,0x42,0,0,0) 287 identd GIO fd 4 wrote 66 bytes "<31>Sep 30 18:45:08 identd[287]: After fscanf(), before k_open()" 287 identd RET sendto 66/0x42 287 identd CALL gettimeofday(0xbfbfcb54,0) 287 identd RET gettimeofday 0 287 identd CALL getpid 287 identd RET getpid 287/0x11f 287 identd CALL sendto(0x4,0xbfbfcfb8,0x44,0,0,0) 287 identd GIO fd 4 wrote 68 bytes "<31>Sep 30 18:45:08 identd[287]: After k_open(), before k_getuid()" 287 identd RET sendto 68/0x44 287 identd CALL __sysctl(0xbfbfd6e0,0x2,0xbfbfd6ec,0xbfbfd6e8,0x804c61f,0x14) 287 identd RET __sysctl 0 287 identd CALL __sysctl(0xbfbfd6ec,0x4,0xbfbfd74c,0xbfbfd748,0xbfbfd798,0x20) 287 identd RET __sysctl -1 errno 1 Operation not permitted 287 identd RET gettimeofday 0 287 identd CALL getpid 287 identd RET getpid 287/0x11f 287 identd CALL sendto(0x4,0xbfbfcfb0,0x40,0,0,0) 287 identd GIO fd 4 wrote 64 bytes "<30>Sep 30 18:45:08 identd[287]: Returned: 1026 , 6667 : NO-USER" 287 identd RET sendto 64/0x40 287 identd CALL fstat(0x1,0xbfbfd45c) 287 identd RET fstat 0 287 identd CALL break(0x8060000) 287 identd RET break 0 287 identd CALL write(0x1,0x805b000,0x1f) 287 identd GIO fd 1 wrote 31 bytes "1026 , 6667 : ERROR : NO-USER\r " 287 identd RET write 31/0x1f 287 identd CALL exit(0) Does this make sense? Thanx! Mischa To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 4:25:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from tatooine.loxinfo.co.th (tatooine.loxinfo.co.th [203.146.61.203]) by hub.freebsd.org (Postfix) with ESMTP id 8FA8D14D88 for ; Wed, 6 Oct 1999 04:25:26 -0700 (PDT) (envelope-from nb@tande.com) Received: from tatooine [203.146.61.203] by tatooine.loxinfo.co.th [127.0.0.1] with SMTP (MDaemon.v2.8.5.0.R) for ; Wed, 06 Oct 1999 18:24:14 +0700 Message-ID: <000c01bf0fed$51ff12c0$cb3d92cb@tatooine.loxinfo.co.th> From: "nb" To: Subject: silo overflows Date: Wed, 6 Oct 1999 18:24:07 +0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.31 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.31 X-MDaemon-Deliver-To: freebsd-questions@freebsd.org X-Return-Path: nb@tande.com Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG My computer running BSD 3.1 (Yes, I know it's not FreeBSD. And I don't like it. But, however, It's my job.). I got this message in syslog. Oct 2 09:57:34 myhost kernel: com0: 1569 silo overflows, 0 lost transmit interrupts Oct 2 13:16:19 myhost kernel: com0: 1322 silo overflows, 0 lost transmit interrupts Oct 2 23:53:02 myhost kernel: com0: 4049 silo overflows, 0 lost transmit interrupts Oct 4 05:38:03 myhost kernel: com0: 1098 silo overflows, 0 lost transmit interrupts Oct 4 08:52:08 myhost kernel: com0: 178 silo overflows, 0 lost transmit interrupts Oct 4 10:08:13 myhost kernel: com0: 208 silo overflows, 0 lost transmit interrupts Someone told me that UART 16550 chip can solve this problem. But my computer is already have it as dmesg shown. com0 at isa0 iobase 0x3f8 irq 4: buffered (16550AF) com1 at isa0 iobase 0x2f8 irq 3: buffered (16550AF) What's wrong about it? Please help me. Very thanks for your advise. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 4:25:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from barrow.uwaterloo.ca (barrow.uwaterloo.ca [129.97.140.32]) by hub.freebsd.org (Postfix) with ESMTP id A7A81150F5 for ; Wed, 6 Oct 1999 04:25:36 -0700 (PDT) (envelope-from acheng@barrow.uwaterloo.ca) Received: from localhost (acheng@localhost) by barrow.uwaterloo.ca (8.8.8/8.8.8) with SMTP id HAA31890 for ; Wed, 6 Oct 1999 07:25:27 -0400 (EDT) Date: Wed, 6 Oct 1999 07:25:26 -0400 (EDT) From: Ada To: freebsd-questions@FreeBSD.ORG Subject: Possible to use plugins under the native FreeBSD netscape with XSwallow Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I have just install rvplayer 5.0 (just upgrade to version 3.3). I was able to play already download .rm file but was unable to play streaming audio directly from Netscape. After searching through the mailing list archives, I learned that I need to use the Linux version of Netscape in order for the plugins to work. However, I came upon one message (Title: linux_emu & netscape plug-ins, author robert@namodn.com) that one can use plugins under the native FreeBSD version via Xswallow. Is there any disadvantages on doing this? Or should I just use linux version of netscape. Many thanks in advance. Ada To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 4:41: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feldspato.ist.utl.pt (feldspato.ist.utl.pt [193.136.143.16]) by hub.freebsd.org (Postfix) with ESMTP id 7FD2D14EB9 for ; Wed, 6 Oct 1999 04:40:43 -0700 (PDT) (envelope-from wlan@feldspato.ist.utl.pt) Received: from localhost (wlan@localhost) by feldspato.ist.utl.pt (8.9.1/8.9.1) with ESMTP id MAA01757; Wed, 6 Oct 1999 12:39:06 +0100 Date: Wed, 6 Oct 1999 12:39:06 +0100 (WEST) From: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" To: David Greenman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Inactive memory In-Reply-To: <199910061006.DAA01900@implode.root.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks for the replies. I did manage to correlate 'slow system' to 'pine getblk' even when there's almost no CPU use... Sometimes it takes more than 10 seconds for Pine to open/close a big mailbox (more than 1000 messages), and during that time the systems respondes slowly... thanks, Joao Pagaime On Wed, 6 Oct 1999, David Greenman wrote: > >Is there a way to turn inactive memory into free memory in > >freeBSD 3.2. ? > > > >I have 512MB of RAM but a significant part (300MB) is only > >reported as free for a few hours after a reboot, > >then it becomes "inactive". > > > >I think that's why we have a slow system, specially with regard > >to Pine that takes for ever to close/open a large mailbox, because it > >spends a lot of time allocating memory (during that time the systems > >becomes very slow)... > > > >Here's the first lines of 'top': > > > >last pid: 50917; load averages: 0.03, 0.03, 0.00 up 1+21:35:32 > >10:46:50 > >94 processes: 1 running, 93 sleeping > >CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% > >idle > >Mem: 32M Active, 419M Inact, 26M Wired, 14M Cache, 8265K Buf, 11M Free > >Swap: 964M Total, 964M Free > > > > > >Any suggestions, hints ? > > Your system would be a lot slower without inactive memory. Basically what > that stat is telling you is that the system was able to use a large amount of > otherwise free memory for file caching, speeding up your applications > significantly. FreeBSD always tries to retain data that is useful; free pages > are just dead, useless pages that contain no useful data. The process of > moving pages from the various queues (inactive, cache, etc) to 'free' is > very fast and in most cases has almost zero overhead. In short, if your > system is slow when running 'pine', then it is for some other reason. > > -DG > > David Greenman > Co-founder/Principal Architect, The FreeBSD Project - http://www.freebsd.org > Creator of high-performance Internet servers - http://www.terasolutions.com > Pave the road of life with opportunities. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 4:47:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bastille.netquick.net (bastille.netquick.net [216.48.32.159]) by hub.freebsd.org (Postfix) with ESMTP id 046C0150DC for ; Wed, 6 Oct 1999 04:47:20 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from localhost.netquick.net ([127.0.0.1] helo=hackfurby.com) by bastille.netquick.net with esmtp (Exim 3.03 #1) id 11Yppd-0000EA-00; Wed, 06 Oct 1999 07:06:05 -0500 Message-ID: <37FB3B2D.E884C420@hackfurby.com> Date: Wed, 06 Oct 1999 07:06:05 -0500 From: TrouBle Reply-To: trouble@netquick.net X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Cyril Brion Cc: freebsd-questions@FreeBSD.org Subject: Re: hi bsd'staff References: <37FB2BCC.797FA76B@saios.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG make sure your subnet mask is 255.255.255.255 on all bsd systems Cyril Brion wrote: > > here it is my lan config: > ntserver4, cisco router, some ntws4, and i would to connect some bsd > stations. > on my actual bsd (laptop), the 3com 3c509D is correctly detected. i > ifconfig it with an ip address A. i add route default to the cisco > router. i ping successfully the local ip on the laptop (ping A), but any > > of the station on the lan. > what's happen ? > do i forgot something? > thanks for the help > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 5:31: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailhub2.mediaone.com (host-251-67.mediaone.com [169.152.251.67]) by hub.freebsd.org (Postfix) with ESMTP id 009FC15229 for ; Wed, 6 Oct 1999 05:30:43 -0700 (PDT) (envelope-from CYahrling@MediaOne.com) Received: from wsimc02.mediaone.com (wsimc02.mediaone.com [169.152.100.191]) by mailhub2.mediaone.com (8.9.3/8.9.3) with SMTP id IAA15108 for ; Wed, 6 Oct 1999 08:30:23 -0400 (EDT) Received: from 169.152.100.30 by wsimc02.mediaone.com with ESMTP ( WorldSecure Server SMTP Relay(WSS) v4.0.1); Wed, 06 Oct 99 08:27:38 -0400 X-Server-Uuid: cda7734f-06b2-11d3-bc59-00805fbb2b22 Received: by exchimc01.mediaone.com with Internet Mail Service ( 5.5.2448.0) id ; Wed, 6 Oct 1999 08:30:08 -0400 Message-ID: <5B6BBEB325D8D2118F7E0008C7CF74ED012456EE@neexch02.mediaone.com> From: "Yahrling, Charles" To: "'freebsd-questions@FreeBSD.ORG'" Subject: fonts for Nestcape Navigator 4.5 Date: Wed, 6 Oct 1999 08:30:04 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) X-WSS-ID: 1BE59FB0151977-01-01 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Just setup 2.2.8 but need Netscape 4.5 or later to browse a network management app (CiscoWorks2000 - Resource Manager Essentials) Netscape 3.0x works for web but when I install 4.5 from the ports 4.5 complains that it can't find any recognizable fonts. Then 3.0x is also broken with same error. I guess I need some fonts but I installed all the available US fonts via the X-User profile when choosing distributions on initial install. What do I need to do? TIA chuck To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 5:56:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from carpa.artmicro.com.br (a00126.impsat.com.br [200.196.79.126]) by hub.freebsd.org (Postfix) with ESMTP id 6C66C15242 for ; Wed, 6 Oct 1999 05:55:13 -0700 (PDT) (envelope-from mosman@artmicro.com.br) Received: from carpa ([200.196.79.113]) by carpa.artmicro.com.br (8.9.3/8.8.7) with SMTP id GAA02199 for ; Wed, 6 Oct 1999 06:10:07 -0300 Message-ID: <006801bf1003$839cc960$714fc4c8@artmicro.com.br> From: "Andrei de Oliveira Moman" To: Subject: t-shits Date: Wed, 6 Oct 1999 11:03:04 -0300 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0065_01BF0FEA.5CEF1700" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0065_01BF0FEA.5CEF1700 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I want to know if may I make some t-shits with freebsd logo.. []'s ------=_NextPart_000_0065_01BF0FEA.5CEF1700 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi, I want to know if may I make some t-shits with = freebsd=20 logo..
 
[]'s
------=_NextPart_000_0065_01BF0FEA.5CEF1700-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 5:59:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.x-atom.ru (ns.X-Atom.ru [145.249.0.20]) by hub.freebsd.org (Postfix) with ESMTP id 56C4314C4B for ; Wed, 6 Oct 1999 05:58:32 -0700 (PDT) (envelope-from aleks@ai.ru) Received: from ai.ru (root@mail.X-Atom.ru [145.249.0.13]) by ns.x-atom.ru (8.9.0/8.9.0) with ESMTP id QAA03961 for ; Wed, 6 Oct 1999 16:49:53 +0400 (MSK/MSD) Received: from bauron (space.ai.ru [145.249.16.70]) by ai.ru (8.8.5/8.8.5) with SMTP id UAA08950 for ; Wed, 6 Oct 1999 20:23:39 +0400 (MSK/MSD) Message-ID: <000701bf0ffa$bedc1c00$0200a8c0@bauron.ai.ru> From: "Aleks" To: Subject: Question about FreeBSD and Linux include files... Date: Wed, 6 Oct 1999 17:00:04 +0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0004_01BF101C.3C841100" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0004_01BF101C.3C841100 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable Hi! I have following question: What FreeBSD include files corresponds to "netinet/ip_tcp", = "netinet/ip_udp", "netinet/protocols.h" (Linux include files)? Thanks in advance. Aleksandr Piskarev. ------=_NextPart_000_0004_01BF101C.3C841100 Content-Type: text/html; charset="koi8-r" Content-Transfer-Encoding: quoted-printable
    Hi!
 
I have following question:
What FreeBSD include files corresponds to=20 "netinet/ip_tcp", "netinet/ip_udp",=20 "netinet/protocols.h" (Linux include = files)?
Thanks in advance.
 
Aleksandr=20 Piskarev.
------=_NextPart_000_0004_01BF101C.3C841100-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:12:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 0CB82151EE for ; Wed, 6 Oct 1999 06:12:22 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YqrA-000Ltd-00; Wed, 6 Oct 1999 14:11:44 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA33191 for ; Wed, 6 Oct 1999 14:11:44 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 14:11:44 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: 250 meg ZIP plus drive - parallel port version Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've seen plenty on the 100 meg and the scsi versions, but has anyone successfully used the new 250 meg parallel port zip drive with freebsd? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:23:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from merlin.rtpnc.epa.gov (merlin.rtpnc.epa.gov [134.67.208.148]) by hub.freebsd.org (Postfix) with ESMTP id C5FC5156ED for ; Wed, 6 Oct 1999 06:23:39 -0700 (PDT) (envelope-from Jenkins.Mike@epamail.epa.gov) Received: from myrtle.rtpnc.epa.gov by epamail.epa.gov (PMDF V5.1-12 #26439) with ESMTP id <0FJ600ELEMPBQ3@epamail.epa.gov> for questions@freebsd.org; Wed, 6 Oct 1999 08:58:57 -0400 (EDT) Received: from EPAHUB2.RTP.EPA.GOV by epamail.epa.gov (PMDF V5.1-12 #26438) with SMTP id <0FJ600BS0MOSZC@epamail.epa.gov> for questions@freebsd.org; Wed, 06 Oct 1999 08:58:05 -0400 (EDT) Received: by EPAHUB2.RTP.EPA.GOV(Lotus SMTP MTA v4.6.3 hotfix 1 (767.1 12-15-1998)) id 85256802.0046C6D5 ; Wed, 06 Oct 1999 08:53:04 -0400 Date: Wed, 06 Oct 1999 07:58:07 -0500 From: Jenkins.Mike@epamail.epa.gov Subject: Re: ipfw and ports > 1023? To: dnelson@emsphone.com Cc: questions@freebsd.org Message-id: <85256802.0046C3A7.00@EPAHUB2.RTP.EPA.GOV> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline X-Lotus-FromDomain: EPA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >The ports are stored internally as an array of 10 numbers; if the >IP_FW_F_SRNG flag is set for the rule, the first two ports in the array >are interpreted as a range. > >So you can have a range and it can be as wide as you like, but it must >be specified first in the port list, and you can only have one range >per rule. Ahh. Much clearer now. I can have "1024-65535,3,4,5,6,7,8,9,10" which is 2 numbers of a range and 8 individual numbers. Thanks, Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:39:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id E39DE15165 for ; Wed, 6 Oct 1999 06:38:46 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YrH5-00028y-00; Wed, 6 Oct 1999 14:38:31 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA33429 for ; Wed, 6 Oct 1999 14:38:30 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 14:38:30 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: ISP connection problems... Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Well, i tried changing the timeout to zero, and i thought that helped, but i am still getting dropped. I tried a variety of modem commands suggested by the ISP to restore factory settings, turn off X2, V90, and various sundry features. What happens is this: first, a Netscape page request seems to take longer than usual... as if the site does not exist. However, at this point, ping is still finding a route to my gateway. Then, netscape reports a few minutes later than it cannot locate the site. At this point, ping fails and netstat -rn reports that the default routes have all been dropped, leaving only loopback. All of this happens even when i am actively using the net, so i don't think it is the timeout. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:50:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 7FFDE1507F for ; Wed, 6 Oct 1999 06:50:33 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id JAA01769; Wed, 6 Oct 1999 09:39:19 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Wed, 6 Oct 1999 09:39:19 -0400 (EDT) From: Alex V P To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG can u ask your isp what kind of router they have, firmvare version, what kind of link do you have, make of your modem? alex On Wed, 6 Oct 1999, J McKitrick wrote: > Well, i tried changing the timeout to zero, and i thought that helped, but > i am still getting dropped. I tried a variety of modem commands suggested > by the ISP to restore factory settings, turn off X2, V90, and various > sundry features. What happens is this: first, a Netscape page request > seems to take longer than usual... as if the site does not exist. > However, at this point, ping is still finding a route to my gateway. > Then, netscape reports a few minutes later than it cannot locate the site. > At this point, ping fails and netstat -rn reports that the default routes > have all been dropped, leaving only loopback. All of this happens even > when i am actively using the net, so i don't think it is the timeout. > > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:53:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 9FF1915130 for ; Wed, 6 Oct 1999 06:52:44 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YrUV-0002LJ-00; Wed, 6 Oct 1999 14:52:23 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA33536; Wed, 6 Oct 1999 14:52:23 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 14:52:23 +0100 (BST) From: J McKitrick To: Alex V P Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG All i know so far is it is an Ascend router. I log in manually. But this also happens with a different account with pap login. I'm not sure what router they use. I'm using a laptop with a 3com noteworthy modem, and running 3.2. Does all that stuff about the firmware make that much of a difference? Shouldn't it be a problem on my end? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:54:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feldspato.ist.utl.pt (feldspato.ist.utl.pt [193.136.143.16]) by hub.freebsd.org (Postfix) with ESMTP id 64BAB15130 for ; Wed, 6 Oct 1999 06:53:18 -0700 (PDT) (envelope-from wlan@feldspato.ist.utl.pt) Received: from localhost (wlan@localhost) by feldspato.ist.utl.pt (8.9.1/8.9.1) with ESMTP id OAA01966 for ; Wed, 6 Oct 1999 14:51:54 +0100 Date: Wed, 6 Oct 1999 14:51:54 +0100 (WEST) From: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" To: freebsd-questions@FreeBSD.ORG Subject: Front page server extensions In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi Does anybody have Frontpage server extensions working for Apache/FreeBSD ? If so, where can I get them ? Thanks, Joao To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 6:56: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 2647E15130 for ; Wed, 6 Oct 1999 06:55:45 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11YrWJ-000Oqk-00; Wed, 6 Oct 1999 14:54:15 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA33546 for ; Wed, 6 Oct 1999 14:54:15 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 14:54:15 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: is this just a rumor about kernel installs? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG *Somewhere* i thought i saw someone say that the a new FreeBSD kernel can be installed without rebooting. This isn't really possible, is it? Could the person have meant compile, not install? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7: 4: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mailhost.criterion.canon.co.uk (mailhost.criterion.canon.co.uk [194.223.249.254]) by hub.freebsd.org (Postfix) with ESMTP id 10A3214D37 for ; Wed, 6 Oct 1999 07:03:49 -0700 (PDT) (envelope-from adamn@csl.com) Received: from csl.com (hermes.criterion.canon.co.uk [194.223.249.13]) by mailhost.criterion.canon.co.uk (8.8.8/8.7.3) with ESMTP id OAA19155; Wed, 6 Oct 1999 14:52:38 +0100 (BST) Message-ID: <37FB5695.6E5FD70C@csl.com> Date: Wed, 06 Oct 1999 15:03:01 +0100 From: Adam Nealis Organization: Criterion Software, Ltd. X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.0.34 i686) X-Accept-Language: en MIME-Version: 1.0 To: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Front page server extensions References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "TFC WLAN 97/98 - IST - ext.2269 (8418269)" wrote: > > Hi > > Does anybody have Frontpage server extensions working for > Apache/FreeBSD ? > > If so, where can I get them ? /usr/ports/www/{apache_fp-1.3.4,apache_fp-1.2.6} To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7: 5:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 8F58615229 for ; Wed, 6 Oct 1999 07:05:10 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id JAA01806; Wed, 6 Oct 1999 09:54:50 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Wed, 6 Oct 1999 09:54:50 -0400 (EDT) From: Alex V P To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG nope :( ascend routers are good but when they made jump to V90 they screw a lot :(. people with x2 modems ( most usr modems etc) cannot stay online for long. flex modems are in much better shape with ascend. i was surprised when I saw people with 33.6 modems to stay online and have a better perfomance then 56k. alex On Wed, 6 Oct 1999, J McKitrick wrote: > All i know so far is it is an Ascend router. I log in manually. But this > also happens with a different account with pap login. I'm not sure what > router they use. I'm using a laptop with a 3com noteworthy modem, and > running 3.2. > Does all that stuff about the firmware make that much of a difference? > Shouldn't it be a problem on my end? > -jm > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7: 9:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw-ra06.raytheon.com (fw-ra06.RAYTHEON.COM [192.27.4.6]) by hub.freebsd.org (Postfix) with ESMTP id 9EE00150DF for ; Wed, 6 Oct 1999 07:09:15 -0700 (PDT) (envelope-from hcwillenbring@west.rsc.raytheon.com) Received: from raygate.rsc.raytheon.com ([147.16.5.21]) by fw-ra06.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA18464; Wed, 6 Oct 1999 07:08:45 -0700 (PDT) Received: from redwood.rsc.raytheon.com (redwood.RSC.RAYTHEON.COM [155.157.138.42]) by raygate.rsc.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA07659; Wed, 6 Oct 1999 07:08:49 -0700 (PDT) Received: from west.rsc.raytheon.com ([155.157.76.39]) by redwood.rsc.raytheon.com (8.9.1a/8.9.1) with ESMTP id IAA21897; Wed, 6 Oct 1999 08:08:48 -0600 (MDT) Message-ID: <37FB57DE.CDDB7172@west.rsc.raytheon.com> Date: Wed, 06 Oct 1999 08:08:32 -0600 From: Hank Willenbring Organization: Raytheon Systems Company - Denver Operations X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Install FreeBSD 3.2 wipes out Win95 boot mgr (bug??) :| Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG To: freebsd-questions@FreeBSD.org Problem Summary: Help with recovering Win95 boot manager after installing FreeBSD 3.2 using CD-ROM System Specs: CPU: PII 233MHz RAM: 32 MB Hard Drives: 2 GB Maxtor IDE (primary master) 12 GB Maxtor IDE (primary slave) CD-ROM: 32x NEC Floppy Drive: 1.44 MB Co-Share OS: Windows95 (This has been installed on the first disk) BIOS: Phoenix 4.0 (allowed me to install FreeBSD 3.2 from CD-ROM). Installation Medium: CD-ROM FreeBSD 3.2 from Walnut Creek << cool install program >> Problem Description: The original system configuration has the 2GB Maxtor IDE hard drive with Windows95 installed. I bought another hard drive (12 GB - lots of room to play!!) with the intention of installing FreeBSD 3.2 on the primary slave IDE hard drive and use BootEasy to toggle between the two operating systems. When installing FreeBSD, I used the "novice" installation procedure (as suggested in the manual). There is a menu for configuring the hard disk drives. The menu selection looked something like: [ ] wd0 // <- 2 GB hard drive [ ] wd1 // <- 12 GB hard drive I selected "wd0" (so that the system would at least recognize the drive there - as the book suggested), and immediately selected "Q" (quit) since I did _not_ want (or need) any disk partitions from this drive. I was then prompted for what boot manager I wanted to use, from which I selected "[*] None" because I did not want the existing boot manager changed. The menu selections eventually went back to configuring the second hard drive (12 GB), and this time I selected "A" for using all of the drive and I also selected "no" to the "dangerously dedicated" menu since, in the "Disk Drive" chapter, it suggested doing this if the disk is to be entirely dedicated to FreeBSD. I selected "BootMgr" to be installed in the MBR for this disk (my BIOS allows alot of flexibility in booting from different computer medium in any order; hard drives (in any order), CD-ROM, floppy disks - nice! :) I then went through the rest of the standard installation and everything seemed to install ok. After the installation was complete, I changed the boot sequence to boot from the original 2 GB hard drive (expecting that Window95 would be booting) only to find out that an error was posted stating "Operating System Not Found" (?????) :( I booted from a Windows95 floppy disk to trouble shoot. The 2 GB disk is fine (all data is still there) except that the MBR is wiped-out [this would appear to me to be a bug since I specified "[*] None" for the MBR]. Is there a way that I can recover the MBR so that I can bring Windows95 back up?? I looked at the "disklabel" utility and it is not obvious that it will work for Windows95. If you have any suggestions, you can save me alot of pain of re-installing Win95 (not to mention my wife will be _much_ happier if she can get back to using her Win95 applications soon!!). New to the FreeBSD community but a long time Unix hacker. Thanks, Hank. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:10:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw-ra06.raytheon.com (fw-ra06.RAYTHEON.COM [192.27.4.6]) by hub.freebsd.org (Postfix) with ESMTP id 8EA6F155BD for ; Wed, 6 Oct 1999 07:10:07 -0700 (PDT) (envelope-from hcwillenbring@west.rsc.raytheon.com) Received: from raygate.rsc.raytheon.com ([147.16.5.21]) by fw-ra06.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA18552; Wed, 6 Oct 1999 07:09:57 -0700 (PDT) Received: from redwood.rsc.raytheon.com (redwood.RSC.RAYTHEON.COM [155.157.138.42]) by raygate.rsc.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA07722; Wed, 6 Oct 1999 07:10:04 -0700 (PDT) Received: from west.rsc.raytheon.com ([155.157.76.39]) by redwood.rsc.raytheon.com (8.9.1a/8.9.1) with ESMTP id IAA21916; Wed, 6 Oct 1999 08:10:03 -0600 (MDT) Message-ID: <37FB582C.1A9944B5@west.rsc.raytheon.com> Date: Wed, 06 Oct 1999 08:09:48 -0600 From: Hank Willenbring Organization: Raytheon Systems Company - Denver Operations X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Install FreeBSD 3.2 wipes out Win95 boot mgr (bug??) :| Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG To: freebsd-questions@FreeBSD.org Problem Summary: Help with recovering Win95 boot manager after installing FreeBSD 3.2 using CD-ROM System Specs: CPU: PII 233MHz RAM: 32 MB Hard Drives: 2 GB Maxtor IDE (primary master) 12 GB Maxtor IDE (primary slave) CD-ROM: 32x NEC Floppy Drive: 1.44 MB Co-Share OS: Windows95 (This has been installed on the first disk) BIOS: Phoenix 4.0 (allowed me to install FreeBSD 3.2 from CD-ROM). Installation Medium: CD-ROM FreeBSD 3.2 from Walnut Creek << cool install program >> Problem Description: The original system configuration has the 2GB Maxtor IDE hard drive with Windows95 installed. I bought another hard drive (12 GB - lots of room to play!!) with the intention of installing FreeBSD 3.2 on the primary slave IDE hard drive and use BootEasy to toggle between the two operating systems. When installing FreeBSD, I used the "novice" installation procedure (as suggested in the manual). There is a menu for configuring the hard disk drives. The menu selection looked something like: [ ] wd0 // <- 2 GB hard drive [ ] wd1 // <- 12 GB hard drive I selected "wd0" (so that the system would at least recognize the drive there - as the book suggested), and immediately selected "Q" (quit) since I did _not_ want (or need) any disk partitions from this drive. I was then prompted for what boot manager I wanted to use, from which I selected "[*] None" because I did not want the existing boot manager changed. The menu selections eventually went back to configuring the second hard drive (12 GB), and this time I selected "A" for using all of the drive and I also selected "no" to the "dangerously dedicated" menu since, in the "Disk Drive" chapter, it suggested doing this if the disk is to be entirely dedicated to FreeBSD. I selected "BootMgr" to be installed in the MBR for this disk (my BIOS allows alot of flexibility in booting from different computer medium in any order; hard drives (in any order), CD-ROM, floppy disks - nice! :) I then went through the rest of the standard installation and everything seemed to install ok. After the installation was complete, I changed the boot sequence to boot from the original 2 GB hard drive (expecting that Window95 would be booting) only to find out that an error was posted stating "Operating System Not Found" (?????) :( I booted from a Windows95 floppy disk to trouble shoot. The 2 GB disk is fine (all data is still there) except that the MBR is wiped-out [this would appear to me to be a bug since I specified "[*] None" for the MBR]. Is there a way that I can recover the MBR so that I can bring Windows95 back up?? I looked at the "disklabel" utility and it is not obvious that it will work for Windows95. If you have any suggestions, you can save me alot of pain of re-installing Win95 (not to mention my wife will be _much_ happier if she can get back to using her Win95 applications soon!!). New to the FreeBSD community but a long time Unix hacker. Thanks, Hank. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:11:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id D0AE415603 for ; Wed, 6 Oct 1999 07:10:49 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YrmI-0000Xc-00; Wed, 6 Oct 1999 15:10:46 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id PAA33710; Wed, 6 Oct 1999 15:10:46 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 15:10:46 +0100 (BST) From: J McKitrick To: Alex V P Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG So, is there some setting i can use that may fix this? And why don't i ge kicked of off windows? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:17:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 674EA15242 for ; Wed, 6 Oct 1999 07:17:01 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id KAA01849; Wed, 6 Oct 1999 10:07:18 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Wed, 6 Oct 1999 10:07:18 -0400 (EDT) From: Alex V P To: Hank Willenbring Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Install FreeBSD 3.2 wipes out Win95 boot mgr (bug??) :| In-Reply-To: <37FB582C.1A9944B5@west.rsc.raytheon.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG from dos command line: fdisk /mbr will reconstruct your mbr record. alex On Wed, 6 Oct 1999, Hank Willenbring wrote: > > To: freebsd-questions@FreeBSD.org > > Problem Summary: > Help with recovering Win95 boot manager after installing FreeBSD > 3.2 using CD-ROM > > System Specs: > > CPU: PII 233MHz > RAM: 32 MB > Hard Drives: 2 GB Maxtor IDE (primary master) > 12 GB Maxtor IDE (primary slave) > CD-ROM: 32x NEC > Floppy Drive: 1.44 MB > Co-Share OS: Windows95 (This has been installed on the first disk) > BIOS: Phoenix 4.0 (allowed me to install FreeBSD 3.2 from > CD-ROM). > > Installation Medium: CD-ROM FreeBSD 3.2 from Walnut Creek > << cool install program >> > > Problem Description: > > The original system configuration has the 2GB Maxtor IDE hard drive with > Windows95 installed. I bought another hard drive (12 GB - lots of room > to play!!) with the intention of installing FreeBSD 3.2 on the primary > slave IDE hard drive and use BootEasy to toggle between the two > operating systems. When installing FreeBSD, I used the "novice" > installation procedure (as suggested in the manual). There is a menu > for configuring the hard disk drives. The menu selection looked > something like: > > [ ] wd0 // <- 2 GB hard drive > [ ] wd1 // <- 12 GB hard drive > > I selected "wd0" (so that the system would at least recognize the drive > there - as the book suggested), and immediately selected "Q" (quit) > since I did _not_ want (or need) any disk partitions from this drive. I > was then prompted for what boot manager I wanted to use, from which I > selected "[*] None" because I did not want the existing boot manager > changed. The menu selections eventually went back to configuring the > second hard drive (12 GB), and this time I selected "A" for using all of > the drive and I also selected "no" to the "dangerously dedicated" menu > since, in the "Disk Drive" chapter, it suggested doing this if the disk > is to be entirely dedicated to FreeBSD. I selected "BootMgr" to be > installed in the MBR for this disk (my BIOS allows alot of flexibility > in booting from different computer medium in any order; hard drives (in > any order), CD-ROM, floppy > disks - nice! :) > > I then went through the rest of the standard installation and everything > seemed to install ok. After the installation was complete, I changed > the boot sequence to boot from the original 2 GB hard drive (expecting > that Window95 would be booting) only to find out that an error was > posted stating "Operating System Not Found" (?????) :( > > I booted from a Windows95 floppy disk to trouble shoot. The 2 GB disk > is fine (all data is still there) except that the MBR is wiped-out [this > would appear to me to be a bug since I specified "[*] None" for the > MBR]. > > Is there a way that I can recover the MBR so that I can bring Windows95 > back up?? I looked at the "disklabel" utility and it is not obvious > that it will work for Windows95. If you have any suggestions, you can > save me alot of pain of re-installing Win95 (not to mention my wife will > be _much_ happier if she can get back to using her Win95 applications > soon!!). > > New to the FreeBSD community but a long time Unix hacker. > > Thanks, Hank. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:19:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw-ra06.raytheon.com (fw-ra06.RAYTHEON.COM [192.27.4.6]) by hub.freebsd.org (Postfix) with ESMTP id 39A4B14F17 for ; Wed, 6 Oct 1999 07:19:44 -0700 (PDT) (envelope-from hcwillenbring@west.rsc.raytheon.com) Received: from raygate.rsc.raytheon.com ([147.16.5.21]) by fw-ra06.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA19258; Wed, 6 Oct 1999 07:19:33 -0700 (PDT) Received: from redwood.rsc.raytheon.com (redwood.RSC.RAYTHEON.COM [155.157.138.42]) by raygate.rsc.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA08339; Wed, 6 Oct 1999 07:19:39 -0700 (PDT) Received: from west.rsc.raytheon.com ([155.157.76.39]) by redwood.rsc.raytheon.com (8.9.1a/8.9.1) with ESMTP id IAA22052; Wed, 6 Oct 1999 08:19:38 -0600 (MDT) Message-ID: <37FB5A6B.4FCDA805@west.rsc.raytheon.com> Date: Wed, 06 Oct 1999 08:19:24 -0600 From: Hank Willenbring Organization: Raytheon Systems Company - Denver Operations X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Install FreeBSD 3.2 wipes out Win95 boot mgr (bug??) :| Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG To: freebsd-questions@FreeBSD.org Problem Summary: Help with recovering Win95 boot manager after installing FreeBSD 3.2 using CD-ROM System Specs: CPU: PII 233MHz RAM: 32 MB Hard Drives: 2 GB Maxtor IDE (primary master) 12 GB Maxtor IDE (primary slave) CD-ROM: 32x NEC Floppy Drive: 1.44 MB Co-Share OS: Windows95 (This has been installed on the first disk) BIOS: Phoenix 4.0 (allowed me to install FreeBSD 3.2 from CD-ROM). Installation Medium: CD-ROM FreeBSD 3.2 from Walnut Creek << cool install program >> Problem Description: The original system configuration has the 2GB Maxtor IDE hard drive with Windows95 installed. I bought another hard drive (12 GB - lots of room to play!!) with the intention of installing FreeBSD 3.2 on the primary slave IDE hard drive and use BootEasy to toggle between the two operating systems. When installing FreeBSD, I used the "novice" installation procedure (as suggested in the manual). There is a menu for configuring the hard disk drives. The menu selection looked something like: [ ] wd0 // <- 2 GB hard drive [ ] wd1 // <- 12 GB hard drive I selected "wd0" (so that the system would at least recognize the drive there - as the book suggested), and immediately selected "Q" (quit) since I did _not_ want (or need) any disk partitions from this drive. I was then prompted for what boot manager I wanted to use, from which I selected "[*] None" because I did not want the existing boot manager changed. The menu selections eventually went back to configuring the second hard drive (12 GB), and this time I selected "A" for using all of the drive and I also selected "no" to the "dangerously dedicated" menu since, in the "Disk Drive" chapter, it suggested doing this if the disk is to be entirely dedicated to FreeBSD. I selected "BootMgr" to be installed in the MBR for this disk (my BIOS allows alot of flexibility in booting from different computer medium in any order; hard drives (in any order), CD-ROM, floppy disks - nice! :) I then went through the rest of the standard installation and everything seemed to install ok. After the installation was complete, I changed the boot sequence to boot from the original 2 GB hard drive (expecting that Window95 would be booting) only to find out that an error was posted stating "Operating System Not Found" (?????) :( I booted from a Windows95 floppy disk to trouble shoot. The 2 GB disk is fine (all data is still there) except that the MBR is wiped-out [this would appear to me to be a bug since I specified "[*] None" for the MBR]. Is there a way that I can recover the MBR so that I can bring Windows95 back up?? I looked at the "disklabel" utility and it is not obvious that it will work for Windows95. If you have any suggestions, you can save me alot of pain of re-installing Win95 (not to mention my wife will be _much_ happier if she can get back to using her Win95 applications soon!!). New to the FreeBSD community but a long time Unix hacker. Thanks, Hank. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:28: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 1EC3015197 for ; Wed, 6 Oct 1999 07:27:47 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id JAA20573; Wed, 6 Oct 1999 09:27:29 -0500 (CDT) (envelope-from dan) Date: Wed, 6 Oct 1999 09:27:28 -0500 From: Dan Nelson To: Aleks Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Question about FreeBSD and Linux include files... Message-ID: <19991006092728.A20328@dan.emsphone.com> References: <000701bf0ffa$bedc1c00$0200a8c0@bauron.ai.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <000701bf0ffa$bedc1c00$0200a8c0@bauron.ai.ru> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 06), Aleks said: > I have following question: > > What FreeBSD include files corresponds to "netinet/ip_tcp", > "netinet/ip_udp", "netinet/protocols.h" (Linux include files)? You should be using netinet/tcp.h, netinet/udp.h, and the getprotobyname() function, all of which exist on Linux as well. I don't know why people try and use system-specific include files when the portable versions are right there. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:31: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from trill.hh.se (trill.hh.se [194.47.5.10]) by hub.freebsd.org (Postfix) with ESMTP id B09661512F for ; Wed, 6 Oct 1999 07:30:43 -0700 (PDT) (envelope-from u98jobj@stud.hh.se) Received: from gs177 (klart@gs177.gsten.hh.se [194.47.16.177]) by trill.hh.se (8.9.3/8.9.3) with SMTP id QAA06797; Wed, 6 Oct 1999 16:27:56 +0200 (MET DST) Message-ID: <001701bf1007$789af560$b1102fc2@gsten.hh.se> From: =?iso-8859-1?B?Sm9lbCBCavZyaw==?= To: "Hank Willenbring" , References: <37FB57DE.CDDB7172@west.rsc.raytheon.com> Subject: SV: Install FreeBSD 3.2 wipes out Win95 boot mgr (bug??) :| Date: Wed, 6 Oct 1999 16:31:22 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG =20 > Is there a way that I can recover the MBR so that I can bring = Windows95 > back up?? I looked at the "disklabel" utility and it is not obvious > that it will work for Windows95. If you have any suggestions, you can > save me alot of pain of re-installing Win95 (not to mention my wife = will > be _much_ happier if she can get back to using her Win95 applications > soon!!). >=20 > New to the FreeBSD community but a long time Unix hacker. >=20 > Thanks, Hank. boot with your win95 disk and enter the following at the prompt: fdisk /mbr You should now be able to boot to win95. You will however not have the option to boot in to FreeBSD. There is a bootmanager in the tools directory called osbsbeta.exe that = you can install from windows that will work on multiple IDE disks and = worked very well for me. Do not forget to backup your MBR, it is still = in beta. Joel To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:36:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id B60F215197 for ; Wed, 6 Oct 1999 07:36:09 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id KAA01878; Wed, 6 Oct 1999 10:25:48 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Wed, 6 Oct 1999 10:25:48 -0400 (EDT) From: Alex V P To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG well, without seeing what's on the router as info and your computer :( my tip will be to start pinging every 60 seconds your router and use ppp -ddial option. one more thing ( hard to explain again ;-) is that you might have problems with the speed. i don't know if they have a profile on the router for you or not, or they do radius verification or not :( but in any case there's a log file and you can ask them to monitor the connection ( yours) and after you lost the link, they'll have in the log file error code ;-) after that is simple. according to the error code they should give you an explaination what's cause the disconecction. I hope this will help. alex On Wed, 6 Oct 1999, J McKitrick wrote: > So, is there some setting i can use that may fix this? And why don't i ge > kicked of off windows? > > -jm > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 7:54:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw-ra06.raytheon.com (fw-ra06.RAYTHEON.COM [192.27.4.6]) by hub.freebsd.org (Postfix) with ESMTP id 84B9C152AD for ; Wed, 6 Oct 1999 07:54:08 -0700 (PDT) (envelope-from hcwillenbring@west.raytheon.com) Received: from raygate.rsc.raytheon.com ([147.16.5.21]) by fw-ra06.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA25106 for ; Wed, 6 Oct 1999 07:53:32 -0700 (PDT) Received: from redwood.rsc.raytheon.com (redwood.RSC.RAYTHEON.COM [155.157.138.42]) by raygate.rsc.raytheon.com (8.9.1/8.9.1) with ESMTP id HAA11300; Wed, 6 Oct 1999 07:53:40 -0700 (PDT) Received: from west.raytheon.com ([155.157.75.204]) by redwood.rsc.raytheon.com (8.9.1a/8.9.1) with ESMTP id IAA22590; Wed, 6 Oct 1999 08:53:39 -0600 (MDT) Message-ID: <37FB6264.CE67F936@west.raytheon.com> Date: Wed, 06 Oct 1999 07:53:24 -0700 From: Richard Broome Organization: Raytheon Systems Company - Denver Operations X-Mailer: Mozilla 4.61 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.org Subject: Install FreeBSD 3.2 [bug?? :| ] wipes out Win95 boot mgr Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG To: freebsd-questions@FreeBSD.org THIS MESSAGE MAY BE A REPEAT OF AN EARLIER MESSAGE SENT. HOWEVER, THE WRONG RETURN E-MAIL ADDRESS WAS GIVEN. PLEASE SEND RESPONSE TO hcwillenbring@west.raytheon.com THANKS (and I apologize for the inconvenience). Problem Summary: Help with recovering Win95 boot manager after installing FreeBSD 3.2 using CD-ROM System Specs: CPU: PII 233MHz RAM: 32 MB Hard Drives: 2 GB Maxtor IDE (primary master) 12 GB Maxtor IDE (primary slave) CD-ROM: 32x NEC Floppy Drive: 1.44 MB Co-Share OS: Windows95 (This has been installed on the first disk) BIOS: Phoneix 4.0 (allowed me to install FreeBSD 3.2 from CD-ROM). Installation Medium: CD-ROM FreeBSD 3.2 from Walnut Creek << cool install program >> Problem Description: The original system configuration has the 2GB Maxtor IDE hard drive with Windows95 installed. I bought another hard drive (12 GB - lots of room to play!!) with the intention of installing FreeBSD 3.2 on the primary slave IDE hard drive and use BootEasy to toggle between the two operating systems. When installing FreeBSD, I used the "novice" installation procedure (as suggested in the manual). There is a menu for configuring the hard disk drives. The menu selection looked something like: [ ] wd0 // <- 2 GB hard drive [ ] wd1 // <- 12 GB hard drive I selected "wd0" (so that the system would at least recognize the drive there - as the book suggested), and immediately selected "Q" (quit) since I did _not_ want (or need) any disk partitions from this drive. I was then prompted for what boot manager I wanted to use, from which I selected "[*] None" because I did not want the existing boot manager changed. The menu selections eventually went back to configuring the second hard drive (12 GB), and this time I selected "A" for using all of the drive and I also selected "no" to the "dangerously dedicated" menu since, in the "Disk Drive" chapter, it suggested doing this if the disk is to be entirely dedicated to FreeBSD. I selected "BootMgr" to be installed in the MBR for this disk (my BIOS allows alot of flexibility in booting from different computer medium in any order; hard drives (in any order), CD-ROM, floppy disks - nice! :) I then went through the rest of the standard installation and everything seemed to install ok. After the installation was complete, I changed the boot sequence to boot from the original 2 GB hard drive (expecting that Window95 would be booting) only to find out that an error was posted stating "Operating System Not Found" (?????) :( I booted from a Windows95 floppy disk to trouble shoot. The 2 GB disk is fine (all data is still there) except that the MBR is wiped-out [this would appear to me to be a bug since I specified "[*] None" for the MBR]. Is there a way that I can recover the MBR so that I can bring Windows95 back up?? I looked at the "disklabel" utility and it is not obvious that it will work for Windows95 (obviously will fix any FreeBSD problems). If you have any suggestions, you can save me alot of pain of re-installing Win95 (not to mention my wife will be _much_ happier if she can get back to using her Win95 applications soon!!). New to the FreeBSD community but a long time Unix hacker. Thanks, Hank. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8: 0: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.wolves.k12.mo.us (mail.wolves.k12.mo.us [207.160.214.1]) by hub.freebsd.org (Postfix) with ESMTP id 4684414CD3 for ; Wed, 6 Oct 1999 07:59:52 -0700 (PDT) (envelope-from cdillon@wolves.k12.mo.us) Received: from mail.wolves.k12.mo.us (cdillon@mail.wolves.k12.mo.us [207.160.214.1]) by mail.wolves.k12.mo.us (8.9.3/8.9.2) with ESMTP id JAA46234; Wed, 6 Oct 1999 09:59:06 -0500 (CDT) (envelope-from cdillon@wolves.k12.mo.us) Date: Wed, 6 Oct 1999 09:59:06 -0500 (CDT) From: Chris Dillon To: Yusuf Goolamabbas Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Trying to achieve zen with natd In-Reply-To: <19991006112744.A3111@outblaze.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Yusuf Goolamabbas wrote: > > That doesn't really make any sense... Is fxp1 attached to your > > private network, or the public network? > > Both, some machines on that network have valid routable address and some > machines have non routable addresses. Therefore I have aliased a 192.168 > on this interface > > What I would like is packets coming via this aliased interface get > NAT'ted to the public interface which is also bound to the same card > This card is connected to a switch which connects via a router to the > WAN interface Aah, now that makes sense. Someone asked me how to do this just the other day. :-) Put the IP address of the alias you assigned to fxp1 in natd_interface="" in /etc/rc.conf instead of the interface name. -- Chris Dillon - cdillon@wolves.k12.mo.us - cdillon@inter-linc.net FreeBSD: The fastest and most stable server OS on the planet. For Intel x86 and Alpha architectures (SPARC under development). ( http://www.freebsd.org ) "One should admire Windows users. It takes a great deal of courage to trust Windows with your data." To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8: 8:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id A166B153B8 for ; Wed, 6 Oct 1999 08:07:43 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id IAA16951; Wed, 6 Oct 1999 08:25:42 -0700 (PDT) Date: Wed, 6 Oct 1999 08:25:42 -0700 (PDT) From: Alfred Perlstein To: trouble@netquick.net Cc: Cyril Brion , freebsd-questions@FreeBSD.ORG Subject: Re: hi bsd'staff In-Reply-To: <37FB3B2D.E884C420@hackfurby.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, TrouBle wrote: > make sure your subnet mask is 255.255.255.255 on all bsd systems This is totally incorrect, check you cabling and other settings. -Alfred > > Cyril Brion wrote: > > > > here it is my lan config: > > ntserver4, cisco router, some ntws4, and i would to connect some bsd > > stations. > > on my actual bsd (laptop), the 3com 3c509D is correctly detected. i > > ifconfig it with an ip address A. i add route default to the cisco > > router. i ping successfully the local ip on the laptop (ping A), but any > > > > of the station on the lan. > > what's happen ? > > do i forgot something? > > thanks for the help > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:19: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 7613C1522D for ; Wed, 6 Oct 1999 08:18:54 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11YsqC-0005g4-00; Wed, 6 Oct 1999 16:18:52 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id QAA34267; Wed, 6 Oct 1999 16:18:52 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Wed, 6 Oct 1999 16:18:52 +0100 (BST) From: J McKitrick To: Alex V P Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Alex, thanks a lot for the help. That info on the logfile will hopefully be helpful. If i can get them to look it up, that is. As far as pinging, i have that set up all the time. As soon as i connect, i start pinging ever 20-30 seconds. Like i said, the problems begin before the ping sessions fails, an i cannot tell how to track it down. IS it difficult getting a big ISP to check my log? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:26:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 62B0B1522D for ; Wed, 6 Oct 1999 08:26:54 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id LAA01959; Wed, 6 Oct 1999 11:16:33 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Wed, 6 Oct 1999 11:16:33 -0400 (EDT) From: Alex V P To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ISP connection problems... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG i hope it's not ;-). if worse come to worse, change the ISP ;-). knowing the cause of disconnection will help but not solve the problem. In any case, you're one step closer to the solution. have fun ;-)_ alex On Wed, 6 Oct 1999, J McKitrick wrote: > Alex, > thanks a lot for the help. That info on the logfile will hopefully be > helpful. If i can get them to look it up, that is. As far as pinging, i > have that set up all the time. As soon as i connect, i start pinging ever > 20-30 seconds. Like i said, the problems begin before the ping sessions > fails, an i cannot tell how to track it down. IS it difficult getting a > big ISP to check my log? > > -jm > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:32:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rmx04.globecomm.net (rmx04.iname.net [206.253.130.33]) by hub.freebsd.org (Postfix) with ESMTP id 7253B1504F for ; Wed, 6 Oct 1999 08:32:32 -0700 (PDT) (envelope-from pons@post.com) Received: from web03_mc.mail.com by rmx04.globecomm.net (8.9.1/8.8.0) with SMTP id LAA05002 ; Wed, 6 Oct 1999 11:31:06 -0400 (EDT) Message-ID: <390319205.939223866025.JavaMail.root@web03_mc.mail.com> Date: Wed, 6 Oct 1999 11:31:06 -0400 (EDT) From: Fadi Sodah To: Questions@FreeBSD.org Subject: Webmailserver Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Mailer: mail.com X-Originating-IP: 212.38.131.194 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi I would like to build a web mail server such as hotmail.com or mail.com .. etc. What are the requirments to do this task? Thanks. pons __________________________________________________ FREE Email for ALL! Sign up at http://www.mail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:32:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 1F2C81522D for ; Wed, 6 Oct 1999 08:32:29 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id LAA01975 for ; Wed, 6 Oct 1999 11:21:50 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Wed, 6 Oct 1999 11:21:50 -0400 (EDT) From: Alex V P To: freebsd-questions@FreeBSD.ORG Subject: UML In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hi all ;-) is there any tool for UML on FreeBSD? ( like rational rose for win nt) TIA alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:33:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from merlin.rtpnc.epa.gov (merlin.rtpnc.epa.gov [134.67.208.148]) by hub.freebsd.org (Postfix) with ESMTP id 12DC615491 for ; Wed, 6 Oct 1999 08:33:00 -0700 (PDT) (envelope-from Jenkins.Mike@epamail.epa.gov) Received: from myrtle.rtpnc.epa.gov by epamail.epa.gov (PMDF V5.1-12 #26439) with ESMTP id <0FJ600FCIS5K5X@epamail.epa.gov> for questions@freebsd.org; Wed, 6 Oct 1999 11:07:07 -0400 (EDT) Received: from EPAHUB2.RTP.EPA.GOV by epamail.epa.gov (PMDF V5.1-12 #26438) with SMTP id <0FJ600GZYPQMND@epamail.epa.gov> for questions@freebsd.org; Wed, 06 Oct 1999 10:04:02 -0400 (EDT) Received: by EPAHUB2.RTP.EPA.GOV(Lotus SMTP MTA v4.6.3 hotfix 1 (767.1 12-15-1998)) id 85256802.004CCE49 ; Wed, 06 Oct 1999 09:58:55 -0400 Date: Wed, 06 Oct 1999 09:04:04 -0500 From: Jenkins.Mike@epamail.epa.gov Subject: Re: port forwarding, again To: uvatha@my-Deja.com Cc: cjc@cc942873-a.ewndsr1.nj.home.com, questions@freebsd.org Message-id: <85256802.004CCD8D.00@EPAHUB2.RTP.EPA.GOV> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline X-Lotus-FromDomain: EPA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG The -redirect_port switch of natd(8) will do the trick. Another option is plugdaemon at http://www.taronga.com/. And previously people have mentioned using netcat (nc) in an inetd entry (see freebsd-isp archives). Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:33:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from merlin.rtpnc.epa.gov (merlin.rtpnc.epa.gov [134.67.208.148]) by hub.freebsd.org (Postfix) with ESMTP id A14B7155B3 for ; Wed, 6 Oct 1999 08:33:00 -0700 (PDT) (envelope-from Jenkins.Mike@epamail.epa.gov) Received: from myrtle.rtpnc.epa.gov by epamail.epa.gov (PMDF V5.1-12 #26439) with ESMTP id <0FJ600FCIS5K5X@epamail.epa.gov> for questions@freebsd.org; Wed, 6 Oct 1999 11:07:04 -0400 (EDT) Received: from EPAHUB2.RTP.EPA.GOV by epamail.epa.gov (PMDF V5.1-12 #26438) with SMTP id <0FJ600GDNS3RND@epamail.epa.gov> for questions@freebsd.org; Wed, 06 Oct 1999 10:55:04 -0400 (EDT) Received: by EPAHUB2.RTP.EPA.GOV(Lotus SMTP MTA v4.6.3 hotfix 1 (767.1 12-15-1998)) id 85256802.00517D7F ; Wed, 06 Oct 1999 10:50:05 -0400 Date: Wed, 06 Oct 1999 09:55:10 -0500 From: Jenkins.Mike@epamail.epa.gov Subject: Re: syslogd questions To: drew@j51.com Cc: questions@freebsd.org Message-id: <85256802.00517AF1.00@EPAHUB2.RTP.EPA.GOV> MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-disposition: inline X-Lotus-FromDomain: EPA Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >What can I do to get ipfw from logging to /var/log/messages? >I have added >!ipfw >*.* /var/log/ipfw > >but now it logs to both files. ipfw uses the kern facility so you could change kern.debug to kern.none on the /var/log/messages line (and maybe /dev/console line) in syslog.conf. Of course, you probably do want to see the other kernel messages so maybe a new line in syslog.conf that sends kern messages to a filter: kern.debug |exec /usr/local/sbin/filter-out-ipfw-messages Mike To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:46:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.binep.ac.ru (ns.binep.ac.ru [193.233.37.5]) by hub.freebsd.org (Postfix) with ESMTP id A4CCA154E0 for ; Wed, 6 Oct 1999 08:44:40 -0700 (PDT) (envelope-from goshik@binep.ac.ru) Received: from serv2.binep.ac.ru (serv2 [193.233.44.77]) by ns.binep.ac.ru (8.9.2/8.8.8) with SMTP id SAA19783 for ; Wed, 6 Oct 1999 18:34:27 +0400 (MSD) (envelope-from goshik@binep.ac.ru) Reply-To: "Igor B. Bykhalo" From: "Igor B. Bykhalo" To: "-questions@FreeBSD" Subject: make -j while building and installing world Date: Wed, 6 Oct 1999 18:31:51 +0300 Message-ID: <01bf100f$e90a8d80$0000e9c1@serv2.binep.ac.ru> MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.0913.2206 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.0913.2200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Can -j N option for make be used when building and installing world on the uniprocessor machine? If yes, for what processor (486, 586, etc.) it makes sence to use it, and with what N? Regards, Goshik _____________________________________________________ Windows 2001: "Sorry, pal, i just can't do this" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:48:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from diarmadhi.mushhaven.net (cm-24-142-61-124.cableco-op.ispchannel.com [24.142.61.124]) by hub.freebsd.org (Postfix) with ESMTP id 63DC7155BD for ; Wed, 6 Oct 1999 08:47:57 -0700 (PDT) (envelope-from mistwolf@diarmadhi.mushhaven.net) Received: (from mistwolf@localhost) by diarmadhi.mushhaven.net (8.9.3/8.9.3) id IAA99645; Wed, 6 Oct 1999 08:48:30 -0700 (PDT) (envelope-from mistwolf) Date: Wed, 6 Oct 1999 08:48:30 -0700 From: Jamie Norwood To: Alfred Perlstein Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Tracking down causes of crashes Message-ID: <19991006084830.A99602@mushhaven.net> References: <19991005141614.A92820@mushhaven.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: ; from Alfred Perlstein on Wed, Oct 06, 1999 at 01:10:48AM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 01:10:48AM -0700, Alfred Perlstein wrote: > > On Tue, 5 Oct 1999, Jamie Norwood wrote: > > > > > All, > > > > I am running (From uname -a): > > > > FreeBSD diarmadhi.mushhaven.net 3.2-STABLE FreeBSD 3.2-STABLE #2: Sun Aug > > 8 12:09:11 GMT 1999 root@:/usr/src/sys/compile/DIARMADHI i386 > > > > Now, I am running an Abit dual socket 370 mainboard with 2 Celeron 500 > > CPU's. All work fine under low load, but should I raise the load (Say > > by running Seti@Home, within 2 hours it just freezes up. > > Are you over clocking these celerons? > > -Alfred Nope. I've never seen the big deal on overclocking, and I can't imagine pushing these things from 500 to anything else. I'd think it was the memory, since I am not sure of it's quality, but Seti@Home isn't a big memory app, it pounds the CPU. Jamie > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 8:59: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from super-g.com (super-g.com [207.240.140.161]) by hub.freebsd.org (Postfix) with ESMTP id 758DA156E6; Wed, 6 Oct 1999 08:58:48 -0700 (PDT) (envelope-from spork@super-g.com) Received: by super-g.com (Postfix, from userid 1000) id 0B137B91C; Wed, 6 Oct 1999 11:57:57 -0400 (EDT) Received: from localhost (localhost [127.0.0.1]) by super-g.com (Postfix) with SMTP id EF02EB91B; Wed, 6 Oct 1999 11:57:56 -0400 (EDT) Date: Wed, 6 Oct 1999 11:57:56 -0400 (EDT) From: spork X-Sender: spork@super-g.inch.com To: Mike Tancsa Cc: Stuart Henderson , scsi@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: External RAID boxes (was Re: AHC errors. Bad disk or bad firmware, or bug in driver ?) In-Reply-To: <3.0.5.32.19990809164854.01c08750@staff.sentex.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 9 Aug 1999, Mike Tancsa wrote: > What I am not clear on from glancing at the mylex site is that they seem to > be cards only and cards with boxes ? Am I right in thinking that you > supply the case ? From the .pdf file Yes, and beyond that there is a model that is simply a "card" for OEM people putting together their own box. We've been buying the one that is in a 5 1/4" full-height drive format. Their webpages generally suck and are out of date. You probably want the DAC-960-SXI-H. > Do you save substantially 'putting it together' yourself ? Probably. We've been putting these inside a few machines (not an external box) for folks who wanted a "RAID solution". It's fast, very fast. Makes the DPT look like a real crawl. We're basically using it more for protection than anything else, but we didn't want to end up with something slower than straight drives off a UW controller. > What sort of price have people paid (in USD), and who is generally a good > outlet to buy from ? I think we paid about $2450 for the SXI-H w/32MB cache. You can probably do better elsewhere, check buy.com or Ingram (if you are or are friendly with a reseller). So an example array came out like so: $2450 SXI-H $1680 6*9GB IBM 34560's $4130 Add a box and you're ready to go... Charles > Thanks for any input anyone can provide on this topic. > > ---Mike > ------------------------------------------------------------------------ > Mike Tancsa, tel 01.519.651.3400 > Network Administrator, mike@sentex.net > Sentex Communications www.sentex.net > Cambridge, Ontario Canada > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 9:15:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta2.rcsntx.swbell.net (mta2.rcsntx.swbell.net [151.164.30.26]) by hub.freebsd.org (Postfix) with ESMTP id AC63D14CB6 for ; Wed, 6 Oct 1999 09:15:34 -0700 (PDT) (envelope-from chris@tourneyland.com) Received: from momma ([216.62.177.1]) by mta2.rcsntx.swbell.net (Sun Internet Mail Server sims.3.5.1999.09.16.21.57.p8) with SMTP id <0FJ6000TLVTR4L@mta2.rcsntx.swbell.net> for freebsd-questions@freebsd.org; Wed, 6 Oct 1999 11:15:28 -0500 (CDT) Date: Wed, 06 Oct 1999 11:14:41 -0500 From: chris@tourneyland.com Subject: Re: 3.3-Release - problem with PATH? In-reply-to: X-Sender: pop992333@mail.9netave.net To: freebsd-questions@freebsd.org Message-id: <3.0.6.32.19991006111441.00872620@mail.9netave.net> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Content-type: text/plain; charset="us-ascii" References: <19991005201206.D315@marder-1> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 02:58 PM 10/5/99 -0700, you wrote: >On Tue, 5 Oct 1999, Mark Ovens wrote: > >> I just wonder why ``make install'' doesn't run rehash as the last >> thing it does > > > Because we want to encourage people to use real shells instead? > I'm not sure what the point is of answering perfectly good questions in obnoxious, non-enlightening ways. I'm *really* not sure why you'd post such answers to the list, unless it's a typical mailing list/USENET "Look how smart I am!" pathetic plea for attention. If you absolutely can't restrain yourself from such, please keep it off the list. - Chris "The nice thing about USENET is for every a**hole who thinks he's pretty smart, there are 5 normal people who are ten times smarter." - Unknown To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 9:17: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id 907E314CB6 for ; Wed, 6 Oct 1999 09:17:01 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id JAA77899; Wed, 6 Oct 1999 09:17:01 -0700 (PDT) Message-ID: <37FB75F9.77DE1C10@owp.csus.edu> Date: Wed, 06 Oct 1999 16:16:57 +0000 From: Joseph Scott X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: + + Cc: freebsd-questions@FreeBSD.ORG Subject: Re: port forwarding, again References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG + + wrote: > > Hi all, > > I posted this question last week in the form of "Can > I do port forwarding with 2.2.7?" I'm going to post > again in the form of, "Can I do it at all?", because > I'm against a brick wall here. (No one replied to my post; I'm hoping I didn't phrase the question right.) > > All I need to do is forward TCP packets that arrive at > my firewall (running FreeBSD 2.2.7) on a certain port > (let's say 4000) to the same port on a machine on my > local network. It seems that I should be able to do this by adding a single ipfw rule to my rc.firewall. > However, the ipfw man page is cryptic and offers no > examples for my situation. Nor do any of the archives > for this list seem to tackle this exact problem. I'm not positive that this will address your problem, but they may be work a look : bounce-1.0 in the ports collection, from the description there : A little program to bounce tcp connections to another machine/port. By default it listens on port 1523. fwtk-2.1 in the ports collection also has tools for creating firewalls, and I think a method for port fowarding is in there also. I think there may be some license restrictions on it's use. I've never actually used either of these so I can't say if they will do the trick or not. I think there are more than a handle full of programs out there similar to the bounce program listed above. In the past I've successfully used nat to forward requests to other machines, usually on the same port, but that shouldn't make a difference. -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 9:20:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f154.law3.hotmail.com [209.185.241.154]) by hub.freebsd.org (Postfix) with SMTP id 2BF9C14CB6 for ; Wed, 6 Oct 1999 09:20:26 -0700 (PDT) (envelope-from myfreebsd@hotmail.com) Received: (qmail 87439 invoked by uid 0); 6 Oct 1999 16:18:13 -0000 Message-ID: <19991006161813.87438.qmail@hotmail.com> Received: from 216.72.30.233 by www.hotmail.com with HTTP; Wed, 06 Oct 1999 09:18:12 PDT X-Originating-IP: [216.72.30.233] From: "Juan Kuuse" To: freebsd-multimedia@freebsd.org, freebsd-questions@freebsd.org, luigi@labinfo.iet.unipi.it Subject: Sound problem - CMI8330 PnP Date: Wed, 06 Oct 1999 16:18:12 GMT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm running 3.0-RELEASE I have an on-motherboard CMI8330 PnP-enabled sound card. If I disable PnP from BIOS, CMI8330 it is detected at: pcm0 at 0x530 irq 5 drq 1 flags 0x9115 on isa mss_attach 0 at 0x530 irq 5 dma 1:5 flags 0x9115 The problem is that if I disable PnP from BIOS, then my NIC isn't detected any longer. (With PnP enabled from BIOS, NE2000 it is detected at: ed0 at 0xef80 irq 11 ) But I can't get them working at the same time. At the boot -c prompt, I tried pnp 1 0 os disable pnp 1 1 os enable irq 5 port0 0x220 drq0 1 drq1 5 with no result. I tried to change the port address to 0x530, with no result. Then I tried to disable PnP from BIOS, and tried pnp 2 0 os enable port0 0xef80 irq0 11 mem0 0xd800 with no success. (Another question: where is this info stored? My kernel.config file is empty. Now I got three "pnp lines" in my configuration. How do I remove them?) Anyone's got suggestions? I really have tried different configurations, and I have read about the info, but I need an expert to help me! (See details about pnpinfo etc. below.) Please send me a copy to kuuse@quik.guate.com , as I'm not on the list. (Yes, I'm using hotmail, but my ISP:s DNS configuration isn't what freebsd.org want it to be. :( All my mails are filtered out.) Thanks in advance. /Juan Kuuse kuuse@quik.guate.com Details (all with PnP BIOS enabled, and CMI8330 not working): >From pnpinfo: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CMI0001 (0x0100a90d), Serial Number 0x01000100 PnP Version 1.0, Vendor Version 0 Device Description: CMI8330. Audio Adapter Logical Device ID: @@@0001 0x01000000 #0 TAG Start DF Good Configuration I/O Range 0x530 .. 0x530, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x8 [16-bit addr] IRQ: 11 - only one type (true/edge) DMA: channel(s) 0 8-bit, not a bus master, count by byte, , Compatibility mode In my kernel config file I put: controller pnp0 device pcm0 at isa? port? tty irq 5 drq 1 flags 0x15 vector pcmintr I config, make depend, make, make install, and reboot. I have tried with cd /dev ./MAKEDEV snd0 and with cd /dev ./MAKEDEV snd1 Anyhow, dmesg gives: pcm0 not found sndstat gives: su-2.02# cat /dev/sndstat cat: /dev/sndstat: Device not configured ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 9:21: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from enginepower.com (server.enginepower.com [207.250.93.2]) by hub.freebsd.org (Postfix) with ESMTP id 180FC14CA0 for ; Wed, 6 Oct 1999 09:20:57 -0700 (PDT) (envelope-from jhays@enginepower.com) Received: from ns2.inc.net.enginepower.com ([172.16.0.88]) by enginepower.com (8.8.5/8.8.5) with SMTP id JAA18232 for ; Wed, 6 Oct 1999 09:58:24 GMT Received: by ns2.inc.net.enginepower.com with Microsoft Mail id <01BF0FEC.4B3F4780@ns2.inc.net.enginepower.com>; Wed, 6 Oct 1999 11:16:53 -0500 Message-ID: <01BF0FEC.4B3F4780@ns2.inc.net.enginepower.com> From: EPI To: "'freebsd-questions@freebsd.org'" Subject: Date: Wed, 6 Oct 1999 11:16:52 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I'm currently using release 2.2.2 of your Free BSD software. I'm = geting the following error mesages. unable to open temporary = maildrop'/var/mail/.nkroll.pop:.Permission denied. server popper err = system error can't open temporary file do you own it? This error above ocurrs when I'm trying to loggin using outlook 98. I = have used telnet and connected successfully using the same login name = and password. nkroll (login name) and sandra ( password ). Thank you in = advance for any help you can provide.=20 John Hays Enginepower Inc.=20 1-800-242-2289 jhays@enginepower.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 9:35:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from newt.wiznet.ca (newt.wiznet.ca [216.13.71.13]) by hub.freebsd.org (Postfix) with ESMTP id 49AE2156EC for ; Wed, 6 Oct 1999 09:35:26 -0700 (PDT) (envelope-from scopplestone@wiznet.ca) Received: from ntwkstn (shaun.wiznet.ca [209.82.57.21]) by newt.wiznet.ca (8.8.7/8.8.8) with SMTP id MAA09370 for ; Wed, 6 Oct 1999 12:35:18 -0400 (EDT) (envelope-from scopplestone@wiznet.ca) From: "Shaun" To: Subject: NATD question Date: Wed, 6 Oct 1999 12:37:57 -0400 Message-ID: <000c01bf1019$258fc870$153952d1@ntwkstn.wiznet.ca> MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 In-Reply-To: <01bf100f$e90a8d80$0000e9c1@serv2.binep.ac.ru> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Question.... I am trying to use NATD to route a subnet of 8 IP addresses using redirect_address. It works going in but when coming out NATD uses port translation on the IP address assigned to the NAT box. For example: The NAT box has a IP address of (say) 192.168.0.10 outside interface, inside interface 10.1.1.1 a subnet of 192.168.200.216 -> 223 is routed to the above ip address by static routes I have created a natd.conf file containing all the direct translations using redirect_address. I can telnet into say 192.168.200.217 and get redirected correctly to 10.1.1.217, but when 10.1.1.217 telnets out, its address is shown as 192.168.0.10 instead of 192.168.200.217. Which tells me that port translation is working instead of nat. Does NATD work with subnets or only full /24's? I currently have this working on another NAT box using a class C. Regards, Shaun To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 9:54:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from misha.cisco.com (misha.cisco.com [171.69.206.50]) by hub.freebsd.org (Postfix) with ESMTP id 0D94814DFF for ; Wed, 6 Oct 1999 09:54:06 -0700 (PDT) (envelope-from mi@misha.cisco.com) Received: (from mi@localhost) by misha.cisco.com (8.9.3/8.9.1) id MAA30610 for questions@freebsd.org; Wed, 6 Oct 1999 12:52:21 -0400 (EDT) (envelope-from mi) Message-Id: <199910061652.MAA30610@misha.cisco.com> Subject: bsd.*.mk and custom install destinations To: questions@freebsd.org Date: Wed, 6 Oct 1999 12:52:21 -0400 (EDT) Reply-To: mi@aldan.algebra.com From: Mikhail Teterin X-Mailer: ELM [version 2.4ME+ PL60 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! Is there a good reason, the bsd.prog.mk and bsd.lib.mk (possibly others) can only install under ${DESTDIR}/usr? I'm using them to build my own software, which I wish to install into /usr/local, for obvious reasons. But so far, it seems I must write my own install target for that. Thanks, -mi To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10: 3:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from s8-37-26.student.washington.edu (S8-37-26.student.washington.edu [128.208.37.26]) by hub.freebsd.org (Postfix) with ESMTP id 5B8F514DFF for ; Wed, 6 Oct 1999 10:03:11 -0700 (PDT) (envelope-from jcwells@u.washington.edu) Received: from localhost (jcw@localhost) by s8-37-26.student.washington.edu (8.9.3/8.9.3) with ESMTP id WAA75991; Wed, 6 Oct 1999 22:01:12 GMT (envelope-from jcwells@u.washington.edu) X-Authentication-Warning: s8-37-26.student.washington.edu: jcw owned process doing -bs Date: Wed, 6 Oct 1999 22:01:12 +0000 (GMT) From: "Jason C. Wells" X-Sender: jcw@s8-37-26.student.washington.edu Reply-To: "Jason C. Wells" To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: is this just a rumor about kernel installs? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, J McKitrick wrote: >*Somewhere* i thought i saw someone say that the a new FreeBSD kernel can >be installed without rebooting. This isn't really possible, is it? Could >the person have meant compile, not install? The kernel _IS_ installed before you reboot while the machine is running. This does not mean the kernel is loaded into memory though. It just sits there on the disc until root reboots. Read the handbook on building kernels. The last step is 'make install'. Thank You, | http://students.washington.edu/jcwells Jason Wells | "Those who would trade freedom for security deserve neither | freedom nor security." - Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10: 4:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from s8-37-26.student.washington.edu (S8-37-26.student.washington.edu [128.208.37.26]) by hub.freebsd.org (Postfix) with ESMTP id 4B4D815708 for ; Wed, 6 Oct 1999 10:04:10 -0700 (PDT) (envelope-from jcwells@u.washington.edu) Received: from localhost (jcw@localhost) by s8-37-26.student.washington.edu (8.9.3/8.9.3) with ESMTP id WAA76004; Wed, 6 Oct 1999 22:04:53 GMT (envelope-from jcwells@u.washington.edu) X-Authentication-Warning: s8-37-26.student.washington.edu: jcw owned process doing -bs Date: Wed, 6 Oct 1999 22:04:53 +0000 (GMT) From: "Jason C. Wells" X-Sender: jcw@s8-37-26.student.washington.edu Reply-To: "Jason C. Wells" To: Douglas Flock Cc: freebsd-questions@FreeBSD.ORG Subject: Re: SU command In-Reply-To: <37FA827C.56699E7A@mccue.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Douglas Flock wrote: >Folks, > >I am getting an error using the SU command: > > Oct 2 06:08:38 myname SU: BAD SU >dougf to root on /dev/ttyE0 > >I have user as member of group Wheel, as required. > >What am I missing? Is something corrupted? Da you have the correct user in group wheel? Do you have the right syntax in /etc/groups? You said group Wheel. Did you mean group wheel? IIRC, if you have group wheel problem su will say something like "not a member of group wheel" Thank You, | http://students.washington.edu/jcwells Jason Wells | "Those who would trade freedom for security deserve neither | freedom nor security." - Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10: 5:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from athena.connectalk.com (athena.connectalk.com [204.19.165.44]) by hub.freebsd.org (Postfix) with ESMTP id 79669156E7 for ; Wed, 6 Oct 1999 10:05:21 -0700 (PDT) (envelope-from madamus@connectalk.com) Received: from connectalk.com ([204.19.165.67]) by athena.connectalk.com (Netscape Messaging Server 3.6) with ESMTP id AAAB31; Wed, 6 Oct 1999 13:03:07 -0400 Message-ID: <37FB8111.B5C331B1@connectalk.com> Date: Wed, 06 Oct 1999 13:04:18 -0400 From: Michel Adamus Organization: ConnecTalk X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: EPI Cc: freebsd-questions@freebsd.org Subject: Mail problem (was ) References: <01BF0FEC.4B3F4780@ns2.inc.net.enginepower.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG EPI wrote: > > Hello, I'm currently using release 2.2.2 of your Free BSD software. I'm geting the following error mesages. unable to open temporary maildrop'/var/mail/.nkroll.pop:.Permission denied. server popper err system error can't open temporary file do you own it? > as root type: # chown nkroll /var/mail/.nkroll.pop This will change the ownership back to user nkroll > This error above ocurrs when I'm trying to loggin using outlook 98. I have used telnet and connected successfully using the same login name and password. nkroll (login name) and sandra ( password ). Thank you in advance for any help you can provide. Now it's a good time to change your password. -A. -- - Throw me a bone here someone... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:19:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from granite.sentex.net (granite.sentex.ca [199.212.134.1]) by hub.freebsd.org (Postfix) with ESMTP id ECEF71574C for ; Wed, 6 Oct 1999 10:18:20 -0700 (PDT) (envelope-from mike@sentex.net) Received: from simoeon (simeon.sentex.ca [209.112.4.47]) by granite.sentex.net (8.8.8/8.6.9) with SMTP id NAA05867 for ; Wed, 6 Oct 1999 13:17:05 -0400 (EDT) Message-Id: <3.0.5.32.19991006131601.019cca20@staff.sentex.ca> X-Sender: mdtpop@staff.sentex.ca X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.5 (32) Date: Wed, 06 Oct 1999 13:16:01 -0400 To: questions@freebsd.org From: Mike Tancsa Subject: login.access and sshd Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is there any way to get sshd honour login.access ? Or at least control who is and is not allowed to login on a per user or group basis ? ---Mike ------------------------------------------------------------------------ Mike Tancsa, tel 01.519.651.3400 Network Administrator, mike@sentex.net Sentex Communications www.sentex.net Cambridge, Ontario Canada To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:24: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id C46EC15729 for ; Wed, 6 Oct 1999 10:23:52 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id NAA05640; Wed, 6 Oct 1999 13:21:57 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Wed, 6 Oct 1999 13:21:56 -0400 (EDT) From: Brett Taylor To: "Mike O'Brien" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Netscape vs. Slashdot vs. FreeBSD In-Reply-To: <199910060750.AAA00425@we-24-130-42-154.we.mediaone.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, > Ok, this may sound off-the-wall, but lately, Netscape 4.07 > and the new Netscape 4.7 both dump core very quickly as soon as > they try to do anything on Slashdot...but only on FreeBSD (3.1 at > the moment). Netscape on Windows (yurgh) works fine, Netscape on > Solaris works fine. > Is anyone else seeing this? Both 4.61 and 4.7 are dumping core on me about 2/3 - 3/4 of the time I try to submit a story (that's the only time I see it happening w/any regularity). Someone else noted that they could crash it by opening up 2 Netscape windows and send both of them to Slashdot. Something seems to have changed on /. recently to cause this as I hadn't had any problems w/ 4.61 there until lately. Brett ***************************************************** Dr. Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * Dept. of Mathematics and Statistics * Walker 234 (540) 831-5410 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:24:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 52E3E15743 for ; Wed, 6 Oct 1999 10:24:07 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id KAA19858; Wed, 6 Oct 1999 10:41:50 -0700 (PDT) Date: Wed, 6 Oct 1999 10:41:50 -0700 (PDT) From: Alfred Perlstein To: Shaun Cc: freebsd-questions@FreeBSD.ORG Subject: Re: NATD question In-Reply-To: <000c01bf1019$258fc870$153952d1@ntwkstn.wiznet.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Shaun wrote: > Question.... > > I am trying to use NATD to route a subnet of 8 IP addresses using > redirect_address. It works going in but when coming out NATD uses port > translation on the IP address assigned to the NAT box. > > For example: > > The NAT box has a IP address of (say) 192.168.0.10 outside interface, > inside interface 10.1.1.1 > a subnet of 192.168.200.216 -> 223 is routed to the above ip address by > static routes > > I have created a natd.conf file containing all the direct translations > using redirect_address. > I can telnet into say 192.168.200.217 and get redirected correctly to > 10.1.1.217, but when 10.1.1.217 telnets out, its address is shown as > 192.168.0.10 instead of 192.168.200.217. Which tells me that port > translation is working instead of nat. > > Does NATD work with subnets or only full /24's? I currently have this > working on another NAT box using a class C. I'm unsure what you mean, you're giving examples with reserved IP blocks but yet I get the impression that you want these IPs to be able to get past natd unmolested, (that you really are not using reserved IPs) I think the simplest way to accomplish this would be to add the -unregistered_only flag to natd, or insert an ipfw rule before your divert rule giving free access to machines coming from your internal interface. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:25:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dentistry.mc.ntu.edu.tw (dent1.mc.ntu.edu.tw [140.112.135.1]) by hub.freebsd.org (Postfix) with ESMTP id D61F014C2F for ; Wed, 6 Oct 1999 10:25:41 -0700 (PDT) (envelope-from rich@dentistry.mc.ntu.edu.tw) Received: from rich (h7.s145.ts30.hinet.net [163.30.145.7]) by dentistry.mc.ntu.edu.tw (8.8.5/8.8.2) with SMTP id BAA07217 for ; Thu, 7 Oct 1999 01:25:42 +0800 (CST) Message-ID: <000801bf1020$14cc6280$07911ea3@rich> From: "rich" To: Subject: Trident Cyber9525DVD PCI/AGP? Date: Thu, 7 Oct 1999 01:27:31 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01BF1063.200EA2A0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01BF1063.200EA2A0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: quoted-printable Does the FreeBSD support this VGA card now? How can I setup my x-windows using this card? thanks a lot! ------=_NextPart_000_0005_01BF1063.200EA2A0 Content-Type: text/html; charset="big5" Content-Transfer-Encoding: quoted-printable
Does the FreeBSD support this VGA card = now?
How can I setup my x-windows using this = card?
thanks a lot!
------=_NextPart_000_0005_01BF1063.200EA2A0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:47:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 2538D15741 for ; Wed, 6 Oct 1999 10:47:22 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 27777 invoked from network); 6 Oct 1999 17:46:45 -0000 Received: from userbq85.uk.uudial.com (HELO marder-1.) (62.188.146.179) by smtp.dial.pipex.com with SMTP; 6 Oct 1999 17:46:45 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id SAA01344; Wed, 6 Oct 1999 18:46:36 +0100 (BST) (envelope-from mark) Date: Wed, 6 Oct 1999 18:46:35 +0100 From: Mark Ovens To: "Jason C. Wells" Cc: Douglas Flock , freebsd-questions@freebsd.org Subject: Re: SU command Message-ID: <19991006184635.D373@marder-1> References: <37FA827C.56699E7A@mccue.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 10:04:53PM +0000, Jason C. Wells wrote: > On Tue, 5 Oct 1999, Douglas Flock wrote: > > >Folks, > > > >I am getting an error using the SU command: > > > > Oct 2 06:08:38 myname SU: BAD SU > >dougf to root on /dev/ttyE0 > > > >I have user as member of group Wheel, as required. > > > >What am I missing? Is something corrupted? > > Da you have the correct user in group wheel? Do you have the right syntax > in /etc/groups? > > You said group Wheel. Did you mean group wheel? > You get that error when you get the password wrong. > IIRC, if you have group wheel problem su will say something like "not a > member of group wheel" > > Thank You, | http://students.washington.edu/jcwells > Jason Wells | "Those who would trade freedom for security deserve neither > | freedom nor security." - Benjamin Franklin > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:48:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bingnet2.cc.binghamton.edu (bingnet2.cc.binghamton.edu [128.226.1.18]) by hub.freebsd.org (Postfix) with ESMTP id 7582915742 for ; Wed, 6 Oct 1999 10:48:01 -0700 (PDT) (envelope-from zzhang@cs.binghamton.edu) Received: from sol.cs.binghamton.edu (cs1-gw.cs.binghamton.edu [128.226.171.72]) by bingnet2.cc.binghamton.edu (8.9.3/8.9.3) with SMTP id NAA12192; Wed, 6 Oct 1999 13:47:59 -0400 (EDT) Date: Wed, 6 Oct 1999 13:33:27 -0400 (EDT) From: Zhihui Zhang Reply-To: Zhihui Zhang To: Alfred Perlstein , Jeroen Ruigrok/Asmodai Cc: freeBSD-questions@FreeBSD.ORG Subject: A successful installation with CD image In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG If you do not have a real CD-ROM around, you can still install FreeBSD with a CD-ROM image downloaded from www.freebsd.org. In the following example, I use the FreeBSD 3.3-Release CD-ROM image downloaded from ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/3.3-install.cd0. You also need a machine running FreeBSD to follow the following steps: Step 1: Download boot floppies kern.flp and mfsroot.flp. They are needed to boot the machine on which I am going to install FreeBSD. Step 2: On the machine already running FreeBSD: # vnconfig /dev/vn0c /usr/cd_image/3.3-install.cd0 # mount -t cd9660 /dev/vn0c /install Note the kernel must be configured to support VN device. Now you can proceed with either Step 3 or Step 4. Step 3: FTP installation: On the machine to be installed, boot from kern.flp and mfsroot.flp. Choose FTP install method with a URL as: fpt://xxx.xxx.xxx.xxx/install Before this use Option on the Installation Media menu to set FTP username as zzhang, password as 12345678. On the machine that is already running FreeBSD, you must create a username zzhang with password as 12345678 and do the following in advance: > mkdir install > cd install > ln -s /install 3.3-RELEASE The FTP istallation is faster than the NFS installation described in Step 4. Step 4: NFS installation: Add the following line to /etc/exports: /install -alldirs xxx.xxx.xxx.xxx If so, when you mount the CD-ROM image, it will be exported automatically (you can umount and mount it again to achieve the same effect). On the machine to be installed, choose NFS media: xxx.xxx.xxx.xxx:/install And you can install FreeBSD over NFS. -Zhihui To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:49:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from newt.wiznet.ca (newt.wiznet.ca [216.13.71.13]) by hub.freebsd.org (Postfix) with ESMTP id 222B31572E for ; Wed, 6 Oct 1999 10:49:31 -0700 (PDT) (envelope-from scopplestone@wiznet.ca) Received: from ntwkstn (shaun.wiznet.ca [209.82.57.21]) by newt.wiznet.ca (8.8.7/8.8.8) with SMTP id NAA11234; Wed, 6 Oct 1999 13:49:15 -0400 (EDT) (envelope-from scopplestone@wiznet.ca) From: "Shaun" To: "Alfred Perlstein" Cc: , Subject: RE: NATD question Date: Wed, 6 Oct 1999 13:51:56 -0400 Message-ID: <000d01bf1023$7b3c1c60$153952d1@ntwkstn.wiznet.ca> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am using registered IP addresses, (just left them and used RFC for sake of privacy) The situation is real IP's on the outside interface, private on the inside interface. Routing the subnet of real addresses to the NAT box and have a subnet of private computers. Hope this clarifies it. Thanks Shaun > -----Original Message----- > From: Alfred Perlstein [mailto:bright@wintelcom.net] > Sent: Wednesday, October 06, 1999 1:42 PM > To: Shaun > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: NATD question > > > > On Wed, 6 Oct 1999, Shaun wrote: > > > Question.... > > > > I am trying to use NATD to route a subnet of 8 IP addresses using > > redirect_address. It works going in but when coming out NATD uses port > > translation on the IP address assigned to the NAT box. > > > > For example: > > > > The NAT box has a IP address of (say) 192.168.0.10 outside > interface, > > inside interface 10.1.1.1 > > a subnet of 192.168.200.216 -> 223 is routed to the above > ip address by > > static routes > > > > I have created a natd.conf file containing all the direct > translations > > using redirect_address. > > I can telnet into say 192.168.200.217 and get redirected correctly to > > 10.1.1.217, but when 10.1.1.217 telnets out, its address is shown as > > 192.168.0.10 instead of 192.168.200.217. Which tells me that port > > translation is working instead of nat. > > > > Does NATD work with subnets or only full /24's? I > currently have this > > working on another NAT box using a class C. > > I'm unsure what you mean, you're giving examples with reserved IP > blocks but yet I get the impression that you want these IPs to be > able to get past natd unmolested, (that you really are not using > reserved IPs) I think the simplest way to accomplish this would be > to add the -unregistered_only flag to natd, or insert an ipfw rule > before your divert rule giving free access to machines coming from > your internal interface. > > -Alfred > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 10:54:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 130AD1573A for ; Wed, 6 Oct 1999 10:54:02 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 28156 invoked from network); 6 Oct 1999 17:45:03 -0000 Received: from userbq85.uk.uudial.com (HELO marder-1.) (62.188.146.179) by smtp.dial.pipex.com with SMTP; 6 Oct 1999 17:45:03 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id SAA01323; Wed, 6 Oct 1999 18:44:53 +0100 (BST) (envelope-from mark) Date: Wed, 6 Oct 1999 18:44:53 +0100 From: Mark Ovens To: chris@tourneyland.com Cc: freebsd-questions@freebsd.org Subject: Re: 3.3-Release - problem with PATH? Message-ID: <19991006184453.C373@marder-1> References: <19991005201206.D315@marder-1> <3.0.6.32.19991006111441.00872620@mail.9netave.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <3.0.6.32.19991006111441.00872620@mail.9netave.net> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 11:14:41AM -0500, chris@tourneyland.com wrote: > At 02:58 PM 10/5/99 -0700, you wrote: > >On Tue, 5 Oct 1999, Mark Ovens wrote: > > > >> I just wonder why ``make install'' doesn't run rehash as the last > >> thing it does > > > > > > Because we want to encourage people to use real shells instead? > > > > I'm not sure what the point is of answering perfectly good questions in > obnoxious, non-enlightening ways. I'm *really* not sure why you'd post such > answers to the list, unless it's a typical mailing list/USENET "Look how > smart I am!" pathetic plea for attention. > > If you absolutely can't restrain yourself from such, please keep it off the > list. > Hmm, a slight over-reaction there methinks. As the "target" of that remark I should say that I took it as humour and the resulting private banter that ensued confirmed it was meant that way: > > Now don't start *that* again ;-) I couldn't resist just _one_ little one.... > - Chris > > "The nice thing about USENET is for every a**hole who > thinks he's pretty smart, there are 5 normal people > who are ten times smarter." > - Unknown > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11: 4:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sstar.com (sstar.com [209.102.160.1]) by hub.freebsd.org (Postfix) with ESMTP id ED86214CD3 for ; Wed, 6 Oct 1999 11:04:25 -0700 (PDT) (envelope-from king@sstar.com) Received: from JKING ([134.132.79.233]) by sstar.com with ESMTP (IPAD 2.5r/64) id 1844800; Wed, 06 Oct 1999 13:04:22 -0500 Message-Id: <4.2.0.58.19991006122121.00a62740@mail.sstar.com> X-Sender: king@mail.sstar.com X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Wed, 06 Oct 1999 13:04:23 -0500 To: questions@freebsd.org From: Jim King Subject: Apache, Frontpage, and mail config Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've got the apache13-fp port installed and running. All is working EXCEPT the FP Extensions form mailer doesn't do anything. I found some information in the FP Extensions docs that say that you need to modify a config file to tell FP where the SMTP server or local mailer program is. I modified we80.cnf in the Frontpage directory according to the docs, but still get the same results - nothing happens. Any ideas? Anybody have a sample config file? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:17:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from we-24-130-42-154.we.mediaone.net (we-24-130-42-154.we.mediaone.net [24.130.42.154]) by hub.freebsd.org (Postfix) with ESMTP id 53CE6150F9 for ; Wed, 6 Oct 1999 11:17:36 -0700 (PDT) (envelope-from obrien@leonardo.net) Received: from mobrien.ni.net (localhost [127.0.0.1]) by we-24-130-42-154.we.mediaone.net (8.9.2/8.9.2) with ESMTP id LAA00481; Wed, 6 Oct 1999 11:18:53 -0700 (PDT) (envelope-from obrien@leonardo.net) Message-Id: <199910061818.LAA00481@we-24-130-42-154.we.mediaone.net> To: Brett Taylor Cc: freebsd-questions@freebsd.org Subject: Re: Netscape vs. Slashdot vs. FreeBSD In-reply-to: Your message of "Wed, 06 Oct 1999 13:21:56 EDT." Date: Wed, 06 Oct 1999 11:18:35 -0700 From: "Mike O'Brien" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Something seems to have changed on /. recently to cause this as I hadn't > had any problems w/ 4.61 there until lately. I sent Rob Malda a note about this. Let's see if he has anything to say. (Assuming he does reply, given his copious spare time.) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:19: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from school.cs.indiana.edu (school.cs.indiana.edu [129.79.252.113]) by hub.freebsd.org (Postfix) with ESMTP id C805015158 for ; Wed, 6 Oct 1999 11:17:54 -0700 (PDT) (envelope-from jiachen@cs.indiana.edu) Received: from localhost (jiachen@localhost) by school.cs.indiana.edu (8.9.3/8.9.3/IUCS_2.28) with ESMTP id NAA06591; Wed, 6 Oct 1999 13:16:47 -0500 (EST) X-Authentication-Warning: school.cs.indiana.edu: jiachen owned process doing -bs Date: Wed, 6 Oct 1999 13:16:47 -0500 (EST) From: Jia-Huang Chen To: Sheldon Hearn Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem with Mergemaster In-Reply-To: <28658.939203754@axl.noc.iafrica.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > On Wed, 06 Oct 1999 02:44:31 EST, Jia-Huang Chen wrote: > > > *** The directory specified for the temporary root environment, > > /var/tmp/temproot, exists. This can be a security risk if untrusted > > users have access to the system. > > > > Use 'd' to delete the old /var/tmp/temproot and continue > > Use 't' to select a new temporary root directory > > Use 'e' to exit mergemaster > > If I were you, I'd choose 'd' here. > > > *** FATAL ERROR: Cannot 'cd' to /usr/src/etc and install files to the > > temproot environment > > If choosing 'd' to delete /var/tmp/temproot doesn't help, check the > permissions on your /usr/src/etc and /var/tmp directories. I tried and unfortunately it still doesn's work. They are the permissions of my directories. Anything wrong ? Thanks, Jia ---------------------------------------------------------- [root@russell-paul:/var/tmp] # ls -la total 8 drwxrwxrwt 4 root wheel 512 Oct 6 12:50 . drwxr-xr-x 18 root wheel 512 Oct 4 18:25 .. drwxr-xr-x 2 root wheel 512 Oct 6 12:50 temproot drwxrwxrwt 2 root wheel 512 Sep 28 23:09 vi.recover [root@nugget:/usr/src] # ls -la total 8 drwxr-xr-x 4 root wheel 512 Oct 6 01:36 . drwxr-xr-x 15 root wheel 512 Oct 5 00:04 .. drwxr-xr-x 2 root wheel 512 Oct 6 01:36 etc drwxr-xr-x 39 root wheel 1024 Oct 4 18:25 sys ---------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:22:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id 264BC1575E for ; Wed, 6 Oct 1999 11:21:26 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id VAA12744; Wed, 6 Oct 1999 21:17:38 +0300 (EEST) (envelope-from ru) Date: Wed, 6 Oct 1999 21:17:38 +0300 From: Ruslan Ermilov To: Shaun Cc: freebsd-questions@FreeBSD.ORG Subject: Re: NATD question Message-ID: <19991006211738.B8944@relay.ucb.crimea.ua> Mail-Followup-To: Shaun , freebsd-questions@FreeBSD.ORG References: <01bf100f$e90a8d80$0000e9c1@serv2.binep.ac.ru> <000c01bf1019$258fc870$153952d1@ntwkstn.wiznet.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <000c01bf1019$258fc870$153952d1@ntwkstn.wiznet.ca>; from Shaun on Wed, Oct 06, 1999 at 12:37:57PM -0400 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 12:37:57PM -0400, Shaun wrote: > Question.... > > I am trying to use NATD to route a subnet of 8 IP addresses using > redirect_address. It works going in but when coming out NATD uses port > translation on the IP address assigned to the NAT box. > What version do you use? I have fixed this right after 3.3-RELEASE. (in src/lib/libalias/alias_db.c, revision 1.10.2.3) RCS file: /usr/FreeBSD-CVS/src/lib/libalias/alias_db.c,v Working file: alias_db.c head: 1.20 branch: locks: strict access list: keyword substitution: kv total revisions: 28; selected revisions: 3 description: ---------------------------- revision 1.10.2.3 date: 1999/09/22 14:15:15; author: ru; state: Exp; lines: +32 -9 MFC: (revs 1.16 - 1.19) - sys/errno.h -> errno.h - make partial links work for outgoing packets Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:31:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from behemoth.lehub.com (behemoth.lehub.com [209.24.238.69]) by hub.freebsd.org (Postfix) with ESMTP id 805891576E for ; Wed, 6 Oct 1999 11:30:45 -0700 (PDT) (envelope-from shibumi@lehub.com) Received: from miranda.lehub.com (miranda.lehub.com [209.24.238.77]) by behemoth.lehub.com (8.9.3/8.9.3) with ESMTP id LAA17613; Wed, 6 Oct 1999 11:31:25 -0700 (PDT) (envelope-from shibumi@lehub.com) Received: from localhost (localhost [127.0.0.1]) by miranda.lehub.com (8.9.3/8.9.3) with ESMTP id LAA11587; Wed, 6 Oct 1999 11:29:39 -0700 (PDT) (envelope-from shibumi@lehub.com) Message-Id: <199910061829.LAA11587@miranda.lehub.com> X-Mailer: exmh version 2.1.0 04/14/1999 To: Greg Lehey Cc: "Mike O'Brien" , freebsd-questions@FreeBSD.ORG Subject: Re: Netscape vs. Slashdot vs. FreeBSD In-reply-to: Your message of "Wed, 06 Oct 1999 17:35:40 +0930." <19991006173540.N78191@freebie.lemis.com> Reply-To: shibumi@redcart.com X-Disclaimer: Unless otherwise noted below, this is not a policy statement X-Url: http://www.shockwave.org/~shibumi Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Wed, 06 Oct 1999 11:29:39 -0700 From: "Kenton A. Hoover" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've run into the same thing. It doesn't always happen. It appears to be X related. I often have a simular problem with pages using Java applets blowing up Netscape as well. Versions 4.5 on. I haven't checked bugzilla. On Wed, 06 Oct 1999 17:35:40 +0930, Sendmail channeled Greg Lehey saying: > On Wednesday, 6 October 1999 at 0:50:44 -0700, Mike O'Brien wrote: > > Ok, this may sound off-the-wall, but lately, Netscape 4.07 > > and the new Netscape 4.7 both dump core very quickly as soon as > > they try to do anything on Slashdot...but only on FreeBSD (3.1 at > > the moment). Netscape on Windows (yurgh) works fine, Netscape on > > Solaris works fine. > > > > Is anyone else seeing this? > > I've seen a lot of cases of Netscrape dying, but I can read this one > fine. This is 4.61. > > Greg > -- > When replying to this message, please copy the original recipients. > For more information, see http://www.lemis.com/questions.html > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > | Kenton A. Hoover | shibumi@marchordie.org | | Private Citizen | | | San Francisco, California | | |===================== http://www.shockwave.org/~shibumi ====================| | An intelligent man is sometimes forced to be drunk to spend | | time with fools. -- For Whom the Bell Tolls | | Ernest Hemingway | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:39:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from voyager.fisicc-ufm.edu (ip-198-202.guate.net [209.198.197.202]) by hub.freebsd.org (Postfix) with ESMTP id 791B115751 for ; Wed, 6 Oct 1999 11:36:19 -0700 (PDT) (envelope-from obonilla@voyager.fisicc-ufm.edu) Received: (from obonilla@localhost) by voyager.fisicc-ufm.edu (8.9.3/8.9.3) id MAA65762; Wed, 6 Oct 1999 12:27:35 -0600 (CST) (envelope-from obonilla) Date: Wed, 6 Oct 1999 12:27:34 -0600 From: Oscar Bonilla To: Andrei de Oliveira Moman Cc: freebsd-questions@FreeBSD.ORG Subject: Re: t-shits Message-ID: <19991006122734.A65735@fisicc-ufm.edu> References: <006801bf1003$839cc960$714fc4c8@artmicro.com.br> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre1i In-Reply-To: <006801bf1003$839cc960$714fc4c8@artmicro.com.br> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 11:03:04AM -0300, Andrei de Oliveira Moman wrote: > Hi, I want to know if may I make some t-shits with freebsd logo.. > > []'s try www.freebsdmall.com they are under promotional stuff regards, -Oscar -- For PGP Public Key: finger obonilla@fisicc-ufm.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:41:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from almazs.pacex.net (almazs.pacex.net [204.1.219.156]) by hub.freebsd.org (Postfix) with ESMTP id 809AB1574A for ; Wed, 6 Oct 1999 11:41:07 -0700 (PDT) (envelope-from danielb@almazs.pacex.net) Received: from localhost (danielb@localhost) by almazs.pacex.net (8.9.2/8.9.3) with SMTP id LAA03869; Wed, 6 Oct 1999 11:40:46 -0700 (PDT) Date: Wed, 6 Oct 1999 11:40:46 -0700 (PDT) From: daniel B To: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Front page server extensions In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Checkout www.freebsdzine.com Dan On Wed, 6 Oct 1999, TFC WLAN 97/98 - IST - ext.2269 (8418269) wrote: > > Hi > > Does anybody have Frontpage server extensions working for > Apache/FreeBSD ? > > If so, where can I get them ? > > Thanks, > Joao > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 11:50:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from resnet.uoregon.edu (resnet.uoregon.edu [128.223.144.32]) by hub.freebsd.org (Postfix) with ESMTP id 9DE4314C36 for ; Wed, 6 Oct 1999 11:50:22 -0700 (PDT) (envelope-from dwhite@resnet.uoregon.edu) Received: from localhost (dwhite@localhost) by resnet.uoregon.edu (8.9.3/8.9.3) with ESMTP id LAA20676; Wed, 6 Oct 1999 11:48:47 -0700 (PDT) (envelope-from dwhite@resnet.uoregon.edu) Date: Wed, 6 Oct 1999 11:48:46 -0700 (PDT) From: Doug White To: Kenneth Culver Cc: freebsd-questions@FreeBSD.ORG Subject: Re: nmap In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Kenneth Culver wrote: > I was just wondering, it seems that (at least nmap thinks so) that > freebsd's security is not as good as linux. here is an nmap output from a > linux box on the local LAN (using nmap -sF -O hostname): Based on the number of ports located, I would give the opposite analysis. If you're using this metric: > TCP Sequence Prediction: Class=random positive increments > Difficulty=1865858 (Good luck!) Versus: > TCP Sequence Prediction: Class=random positive increments > Difficulty=31411 (Worthy challenge) It's entirely bogus. Differences in the random numbers generated affect the difficulty greatly. The algorithm used is more interesting. Try running this against an OpenBSD box. > Remote operating system guess: Linux 2.1.122 - 2.2.12 These strings are hardcoded into the app, so no wonder it doesn't differentiate between 3.X and 4.X boxen; they should come up with the same identity anyway. Lesson: Don't depend on the output of one simple app for an entire security analysis. It's only one tool. Doug White | FreeBSD: The Power to Serve dwhite@resnet.uoregon.edu | www.FreeBSD.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 12: 9:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cepheus.azstarnet.com (cepheus.azstarnet.com [169.197.56.195]) by hub.freebsd.org (Postfix) with ESMTP id 702E3150FB for ; Wed, 6 Oct 1999 12:08:54 -0700 (PDT) (envelope-from sbcorey@treefort.org) Received: from dialup16ip081 (dialup16ip081.tus.azstarnet.com [169.197.37.209]) by cepheus.azstarnet.com (8.9.3+blt.Beta0/8.9.3) with SMTP id MAA23346; Wed, 6 Oct 1999 12:08:38 -0700 (MST) X-Sent-via: StarNet http://www.azstarnet.com/ From: Scott Corey Reply-To: sbcorey@treefort.org To: Douglas Flock , freebsd-questions@FreeBSD.ORG Subject: Re: SU command Date: Wed, 6 Oct 1999 12:18:41 -0700 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain References: <37FA827C.56699E7A@mccue.com> MIME-Version: 1.0 Message-Id: <99100612192300.56931@dialup16ip081> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 05 Oct 1999, Douglas Flock wrote: > Folks, > > I am getting an error using the SU command: > > Oct 2 06:08:38 myname SU: BAD SU > dougf to root on /dev/ttyE0 > > I have user as member of group Wheel, as required. > > What am I missing? Is something corrupted? > > E-mail: dougf@mccue.com > > > Thanks, > Doug > > Did you type "su" or "SU"? ain't teknolergy wunnerful? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 12:23:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from jade.cynikal.net (cynikal.net [205.189.73.189]) by hub.freebsd.org (Postfix) with ESMTP id 18D2D15330 for ; Wed, 6 Oct 1999 12:23:10 -0700 (PDT) (envelope-from defiance@jade.cynikal.net) Received: by jade.cynikal.net (Postfix, from userid 1006) id E47C8319B; Wed, 6 Oct 1999 15:29:02 +0000 (GMT) Received: from localhost (localhost [127.0.0.1]) by jade.cynikal.net (Postfix) with ESMTP id BBCA2319A; Wed, 6 Oct 1999 15:29:02 +0000 (GMT) Date: Wed, 6 Oct 1999 15:29:02 +0000 (GMT) From: Kevin Libutsi To: Len Huppe Cc: freebsd-questions@freebsd.org Subject: Re: i would like to get a book about free bsd? In-Reply-To: <37FAFD5D.A208592C@execpc.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thank you for replying me about "The complete FreeBSD" but i've tried to find it around the net but everwhere i go it says that they do not have it or they have to order it and its discontinued. Are you sure that wwww.freebsdmail.com will have it. If they do thanks, and i will order it right away. Thanks Len To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 12:31:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from guard.polynet.lviv.ua (Guard.PolyNet.Lviv.UA [209.58.62.194]) by hub.freebsd.org (Postfix) with SMTP id D0C88153B6 for ; Wed, 6 Oct 1999 12:30:55 -0700 (PDT) (envelope-from ts@postoffice.polynet.lviv.ua) Received: (qmail 68575 invoked from network); 6 Oct 1999 10:22:51 -0000 Received: from unknown (HELO postoffice.polynet.lviv.ua) (unknown) by unknown with SMTP; 6 Oct 1999 10:22:51 -0000 Received: (qmail 92910 invoked by uid 1000); 6 Oct 1999 10:22:50 -0000 Date: 6 Oct 1999 13:22:50 +0300 Date: Wed, 6 Oct 1999 13:22:50 +0300 (EEST) From: Yaroslav Terletsky X-Sender: ts@NetSurfer.lp.lviv.ua To: FreeBSD Questions Mailing List Subject: Re: Multiple Default Routes !!! Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, If you already have one default route (which is 0.0.0.0/0.0.0.0) and will add another, for example 0.0.0.0/255.0.0.0 you'll see them together in the routing table: $ route add -net 0.0.0.0 -netmask 255.0.0.0 194.44.139.65 $ netstat -rn Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 194.44.139.65 UGSc 0 0 ep0 => default 209.58.62.193 UGSc 27 886299 ep0 I don't know the sense of it and which one will be preferred but it is "AS IS" and I wonder it violates something. The other question is how to use it? Any thoughts? == Yaroslav To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 12:38:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from orion.ac.hmc.edu (Orion.AC.HMC.Edu [134.173.32.20]) by hub.freebsd.org (Postfix) with ESMTP id B7FE91575D for ; Wed, 6 Oct 1999 12:37:31 -0700 (PDT) (envelope-from brooks@one-eyed-alien.net) Received: from localhost (brdavis@localhost) by orion.ac.hmc.edu (8.8.8/8.8.8) with ESMTP id MAA02275; Wed, 6 Oct 1999 12:36:39 -0700 (PDT) X-Authentication-Warning: orion.ac.hmc.edu: brdavis owned process doing -bs Date: Wed, 6 Oct 1999 12:36:39 -0700 (PDT) From: Brooks Davis X-Sender: brdavis@orion.ac.hmc.edu To: Bill McMilleon Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Bridging ethernet over serial devices: possible? How? In-Reply-To: <000101bf0f6b$e26f8560$6401a8c0@mchome> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 5 Oct 1999, Bill McMilleon wrote: > I have two external modems and would like to do a > LAN to LAN connection that bridges ethernet frames > (I need IP and IPX on both ends and it needs to look like > one big LAN, read: no NAT). Can anyone point me in the > direction I need to go to get this working under > FreeBSD (3.2 or 3.3)? I've seen a Bridging-HOWTO for > Linux that discusses the program BRCFG in applications for > NIC-to-NIC bridging, but I don't see anything about > NIC-to-serial device bridging. NIC-to-NIC bridging is available in -stable and -current as a kernel option. I don't think there is currently any support for NIC-serial-NIC bridging, but it wouldn't be hard to write. I wrote a simple NIC-NIC bridge in a couple of hours using bpf for network reading and writing (unfortunatly, I can't give you the code because it's my companies and I specificaly designed it to do evil things to the packets crossing the bridge to demonstrate security problems in certain protocols.) To do it over serial, you would just have to write a bit more code that passed bridged packets and bridge table updates across the serial line. There might also be a cool way to do it all with netgraph and some modifications to the current bridge code, but I don't know enough about either system to comment. > One other thing: does the linux program brcfg work under > FreeBSD's linux emulation? I don't think so. -- Brooks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 13: 3:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mug.adhesivemedia.com (mug.adhesivemedia.com [207.202.159.73]) by hub.freebsd.org (Postfix) with ESMTP id E9CFC15259; Wed, 6 Oct 1999 13:03:36 -0700 (PDT) (envelope-from philip@adhesivemedia.com) Received: from localhost (philip@localhost) by mug.adhesivemedia.com (8.9.3/8.9.3) with ESMTP id NAA04412; Wed, 6 Oct 1999 13:04:09 -0700 (PDT) (envelope-from philip@adhesivemedia.com) Date: Wed, 6 Oct 1999 13:04:09 -0700 (PDT) From: Philip Hallstrom To: freebsd-hardware@freebsd.org, freebsd-questions@freebsd.org Subject: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello - I'm looking at getting a tape drive and from all my searching and reading it seems like DAT/DDS is the way to go. I'm looking at the 4/8GB SCSI drives. basoncomputer.com has the following drives: 8.0GB Conner CTD8000 SCSI DAT $329 8.0GB Hewlett Packerd C1533A SCSI DAT $319 8.0GB Seagate STD28000N SCSI DAT $395 8.0GB Sony STD5000 SCSI DAT $319 Here's what I think I know about these drives: Conner - Not a thing. Can't find any info on it on the net, nor any good/bad posts in these mailing lists. HP - Nothing on their site other than it's discontinued, and several people mentioning they've had problems. Seagate - Sounds like a good drive, several good posts about it. Sony - Nothing on their site, some posts saying it's great, other's saying it sucks. Which drive should I get? I don't mind spending the money for the Seagate, but if I don't have to, why should I? Thanks! Please reply via email as I'm not subscribe to the lists yet. -philip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 13:16:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from news.rdc1.tn.home.com (ha2.rdc1.tn.home.com [24.2.7.67]) by hub.freebsd.org (Postfix) with ESMTP id 5A17014D94 for ; Wed, 6 Oct 1999 13:15:28 -0700 (PDT) (envelope-from williamsl@home.com) Received: from RELIABLE ([24.4.115.31]) by news.rdc1.tn.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991006201528.IJRT13734.news.rdc1.tn.home.com@RELIABLE> for ; Wed, 6 Oct 1999 13:15:28 -0700 Date: Wed, 6 Oct 1999 16:15:27 -0400 From: Ben Williams X-Mailer: The Bat! (v1.34a) UNREG / CD5BF9353B3B7091 X-Priority: 3 (Normal) Message-ID: <8677.991006@home.com> To: FreeBSD questions Subject: IMAP -> POP3 gateway? Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG FreeBSD, Does anyone know how I could go about setting up an IMAP server (uw-imap "IMAP4rev1 v12.250" from ports) to talk to a pop3 server? The reason I want to do this is the company I am working for has a custom smtp/pop3 server which holds all of its messages internally and the application I am trying to put together for them already has IMAP support built into to, but putting the IMAP server on the system results in empty mailboxes because the custom smtp/pop3 is holding all the messages in non-standard ways and places. Any ideas and all help appreciated. -- Ben To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 13:23:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bureau6.utcc.utoronto.ca (bureau6.utcc.utoronto.ca [128.100.132.16]) by hub.freebsd.org (Postfix) with ESMTP id 5E3871532E for ; Wed, 6 Oct 1999 13:23:21 -0700 (PDT) (envelope-from pc.mackenzie@utoronto.ca) Received: from [207.245.11.22] ([207.245.11.22] EHLO paul ident: NO-IDENT-SERVICE [port 1621]) by bureau6.utcc.utoronto.ca with ESMTP id <464629-2123>; Wed, 6 Oct 1999 16:23:11 -0400 Message-Id: <4.2.0.58.19991006161435.00a79bc0@mail.elehost.com> X-Sender: pc.mackenzie@mailbox21.utcc.utoronto.ca X-Mailer: QUALCOMM Windows Eudora Pro Version 4.2.0.58 Date: Wed, 06 Oct 1999 16:23:27 -0400 To: freebsd-questions@FreeBSD.ORG From: Paul MacKenzie Subject: FTPD Chrrot Problem in Make for FreeBSD 3.3 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, When I try and compile the FTPD with FTPD_INTERNAL_LS turned on I get the following annoying error, /usr/src/libexec/ make Runs through a few parts of the make process, and then spits out this error: Make: don't know how to make ls.c. Stop I am trying to make the system work with chroot directories, Any help would be much appreciated Thanks Paul To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 13:29:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dt011n66.san.rr.com (dt011n66.san.rr.com [204.210.13.102]) by hub.freebsd.org (Postfix) with ESMTP id D19741506F for ; Wed, 6 Oct 1999 13:29:11 -0700 (PDT) (envelope-from Doug@gorean.org) Received: from localhost (doug@localhost) by dt011n66.san.rr.com (8.9.3/8.8.8) with ESMTP id NAA56123; Wed, 6 Oct 1999 13:29:09 -0700 (PDT) (envelope-from Doug@gorean.org) Date: Wed, 6 Oct 1999 13:29:09 -0700 (PDT) From: Doug X-Sender: doug@dt011n66.san.rr.com To: Jia-Huang Chen Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Problem with Mergemaster In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Since mergemaster is a port and not part of the base system, problems with it should be sent to me directly so we don't bother all the nice people. :) On Wed, 6 Oct 1999, Jia-Huang Chen wrote: > When I try to run mergemaster v1.36, it comes with these: > but I do have the directory, /usr/src/etc/ > Any help ? Thanks, > *** Creating the temporary root environment in /var/tmp/temproot > *** /var/tmp/temproot ready for use > *** Creating and populating directory structure in /var/tmp/temproot > > make: don't know how to make distrib-dirs. Stop > > *** FATAL ERROR: Cannot 'cd' to /usr/src/etc and install files to the > temproot environment This indicates to me that something is missing from your stuff in /usr/src/etc, which almost certainly is an up to date Makefile. How did you install the sources? What does 'ls /usr/src/etc/Makefile' say? Doug -- "Stop it, I'm gettin' misty." - Mel Gibson as Porter, "Payback" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 13:29:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 355FC1506F; Wed, 6 Oct 1999 13:29:52 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from feral.com (mjacob@feral.com [192.67.166.1]) by feral.com (8.8.7/8.8.7) with ESMTP id NAA01675; Wed, 6 Oct 1999 13:29:39 -0700 Date: Wed, 6 Oct 1999 13:29:39 -0700 (PWT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Philip Hallstrom Cc: freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Hello - > I'm looking at getting a tape drive and from all my searching and > reading it seems like DAT/DDS is the way to go. I'm looking at the 4/8GB > SCSI drives. basoncomputer.com has the following drives: > > > 8.0GB Conner CTD8000 SCSI DAT $329 > 8.0GB Hewlett Packerd C1533A SCSI DAT $319 > 8.0GB Seagate STD28000N SCSI DAT $395 > 8.0GB Sony STD5000 SCSI DAT $319 > > Here's what I think I know about these drives: > > Conner - Not a thing. Can't find any info on it on the net, nor any > good/bad posts in these mailing lists. Was Archive, then was bought by Conner. Killed and bought by Seagate. > > HP - Nothing on their site other than it's discontinued, and several > people mentioning they've had problems. > > Seagate - Sounds like a good drive, several good posts about it. > > Sony - Nothing on their site, some posts saying it's great, other's > saying it sucks. > > > Which drive should I get? I don't mind spending the money for the > Seagate, but if I don't have to, why should I? I have to say I've been disappointed by low end DATs. If you can, go to www.corpsys.com and get the older Archive DDS2 4 slot changer- it's only 500$. Otherwise, I say spend more money and get an HP DDS3 drive. I have to say that the TR4/TR5 clones that HP seems to be building seem pretty good. Media is expensive though. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 13:44: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id 858E6151E0 for ; Wed, 6 Oct 1999 13:43:58 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id NAA78694; Wed, 6 Oct 1999 13:43:53 -0700 (PDT) Message-ID: <37FBB487.6AC8B32F@owp.csus.edu> Date: Wed, 06 Oct 1999 20:43:51 +0000 From: Joseph Scott Organization: Water Programs - CSU Sacramento X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: Mike Tancsa Cc: questions@FreeBSD.ORG Subject: Re: login.access and sshd References: <3.0.5.32.19991006131601.019cca20@staff.sentex.ca> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Mike Tancsa wrote: > > Is there any way to get sshd honour login.access ? Or at least control who > is and is not allowed to login on a per user or group basis ? From man sshd, under the CONFIGURATION FILE section : AllowGroups This keyword can be followed by any number of group name patterns, separated by spaces. If specified, login is allowed only if users primary group name matches one of the patterns. '*' and '?' can be used as wildcards in the patterns. By default, logins as all users are allowed. Note that the all other login authentication steps must still be sucessfully completed. AllowGroups and DenyGroups are additional restrictions. .... AllowUsers This keyword can be followed by any number of user name patterns or user@host patterns, separated by spaces. Host name may be either the dns name or the ip address. If specified, login is allowed only as users whose name matches one of the patterns. '*' and '?' can be used as wildcards in the patterns. By default, logins as all users are allowed. Note that the all other login authentication steps must still be sucessfully completed. AllowUsers and DenyUsers are additional restrictions. This should do what you are asking, however I could see having sshd respect login.access make sense, that way you only have configure access control in place. -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14: 3: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sr2.viacom.com (sr2.viacom.com [166.77.235.171]) by hub.freebsd.org (Postfix) with ESMTP id A604A1576B for ; Wed, 6 Oct 1999 14:03:00 -0700 (PDT) (envelope-from Adrian.Henke@vh1.com) Received: from secureny2.secure.viacom.com (fire-smtp-dmz.viacom.com [166.77.235.210]) by sr2.viacom.com (8.9.1a/8.9.1) with ESMTP id RAA06706 for ; Wed, 6 Oct 1999 17:01:32 -0400 (EDT) Received: by SECURENY2 with Internet Mail Service (5.5.2650.10) id <42D6Q47G>; Wed, 6 Oct 1999 17:02:54 -0400 Message-ID: <17021EFBA34CD211BC6400A0C9C749059C23B5@vh1ny2.viacom.com> From: "Henke, Adrian" To: "'freebsd-questions@FreeBSD.ORG'" Subject: regarding execution paths Date: Wed, 6 Oct 1999 17:11:31 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.10) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi - I'm a complete FreeBSD newbie. I have successfully installed the OS (from the Power Pack CD) and configured an X Server. My question is as follows: how exactly do I setup and run the Gnome file manager? That is, I can get Enlightenment up, but I can't get any directory icons, i.e., a file manager, up on the screen. It appears that this may be an execution path issue. I have read the handbook, as well as The Complete FreeBSD book included with the CD and innumerable web-based tutorials, but I have been unable to find any explicit or unambiguous directions regarding this. Do I simply need to copy the entire gnome directory (with subdirectories) into my /usr directory, or am I overlooking something? Also, do I need to make any of the files therein executable? Lastly, what's the best method of configuring the xinitrc file for this setup? The gnome directory currently exists on my root filesystem, untouched after installation. I would have liked to try kde, but apparently the kdelibs1.0 file is required and doesn't seem to appear on the first CD-Rom. If anyone can help me in any way regarding this, I would really appreciate it! Sincere thanks, Adrian Henke To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14: 6:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from granite.sentex.net (granite.sentex.ca [199.212.134.1]) by hub.freebsd.org (Postfix) with ESMTP id 35A00152A1 for ; Wed, 6 Oct 1999 14:06:26 -0700 (PDT) (envelope-from mike@sentex.net) Received: from simoeon (simeon.sentex.ca [209.112.4.47]) by granite.sentex.net (8.8.8/8.6.9) with SMTP id RAA15669; Wed, 6 Oct 1999 17:06:22 -0400 (EDT) Message-Id: <3.0.5.32.19991006170517.01561660@staff.sentex.ca> X-Sender: mdtpop@staff.sentex.ca X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.5 (32) Date: Wed, 06 Oct 1999 17:05:17 -0400 To: Joseph Scott From: Mike Tancsa Subject: Re: login.access and sshd Cc: questions@FreeBSD.ORG In-Reply-To: <37FBB487.6AC8B32F@owp.csus.edu> References: <3.0.5.32.19991006131601.019cca20@staff.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 08:43 PM 10/6/99 +0000, Joseph Scott wrote: > >Mike Tancsa wrote: >> >> Is there any way to get sshd honour login.access ? Or at least control who >> is and is not allowed to login on a per user or group basis ? > >>From man sshd, under the CONFIGURATION FILE section : > > AllowGroups >This should do what you are asking, however I could see having sshd >respect login.access make sense, that way you only have configure access >control in place. > Thanks. On the box I was working on, it had ssh2 installed as well as the old one, but I neglected to look at the man pages for sshd1 to see those options. When logging in via ssh1, it does honour the AllowUsers and Denyusers setup I have installed. But if the client is using V2, it does not seem to honour that setting ? I have them in both config files. ---Mike ------------------------------------------------------------------------ Mike Tancsa, tel 01.519.651.3400 Network Administrator, mike@sentex.net Sentex Communications www.sentex.net Cambridge, Ontario Canada To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:17:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id 3BAA915164 for ; Wed, 6 Oct 1999 14:17:40 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id OAA78794; Wed, 6 Oct 1999 14:15:46 -0700 (PDT) Message-ID: <37FBBBFE.277B4C73@owp.csus.edu> Date: Wed, 06 Oct 1999 21:15:42 +0000 From: Joseph Scott Organization: Water Programs - CSU Sacramento X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: Mike Tancsa Cc: questions@FreeBSD.ORG Subject: Re: login.access and sshd References: <3.0.5.32.19991006131601.019cca20@staff.sentex.ca> <3.0.5.32.19991006170517.01561660@staff.sentex.ca> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Mike Tancsa wrote: > > Thanks. On the box I was working on, it had ssh2 installed as well as the > old one, but I neglected to look at the man pages for sshd1 to see those > options. > When logging in via ssh1, it does honour the AllowUsers and Denyusers setup > I have installed. But if the client is using V2, it does not seem to > honour that setting ? I have them in both config files. > > ---Mike This may sound a little backwards, but it may solve you problem, only use sshd1. I believe what will happen then is ssh1 clients will connect fine and ssh2 clients will fall back to ssh1 protocols. I'm not for sure about that, but I seem to remember that being the case. -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:19: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id 2A8E915164 for ; Wed, 6 Oct 1999 14:18:57 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11YyRt-0001Lh-00; Wed, 6 Oct 1999 14:18:09 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id OAA22267; Wed, 6 Oct 1999 14:18:05 -0700 Date: Wed, 6 Oct 1999 14:18:04 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: IMAP -> POP3 gateway? To: Ben Williams Cc: FreeBSD questions In-Reply-To: <8677.991006@home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 6-Oct-99 at 13:27, Ben Williams (williamsl@home.com) wrote: > FreeBSD, > > Does anyone know how I could go about setting up an IMAP server > (uw-imap "IMAP4rev1 v12.250" from ports) to talk to a pop3 server? The > reason I want to do this is the company I am working for has a custom > smtp/pop3 server which holds all of its messages internally and the > application I am trying to put together for them already has IMAP > support built into to, but putting the IMAP server on the system > results in empty mailboxes because the custom smtp/pop3 is holding all > the messages in non-standard ways and places. > > Any ideas and all help appreciated. The Cyrus IMAP server comes with a POP daemon that translates the POP requests into IMAP. That's the exact opposite of what you want; but it still might provide a framework. (I'm assuming that it is extremely unlikely that you could convince them to switch to a standard IMAP server with POP access; even one like Cyrus that keeps all the mail in a private area and forces access via IMAP/POP.) -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:21:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from imo26.mx.aol.com (imo26.mx.aol.com [198.81.17.70]) by hub.freebsd.org (Postfix) with ESMTP id F23A514CB8 for ; Wed, 6 Oct 1999 14:21:23 -0700 (PDT) (envelope-from Quill235@aol.com) Received: from Quill235@aol.com by imo26.mx.aol.com (mail_out_v23.6.) id nXPLa23737 (4511) for ; Wed, 6 Oct 1999 17:21:20 -0400 (EDT) From: Quill235@aol.com Message-ID: <0.c1cabe60.252d1750@aol.com> Date: Wed, 6 Oct 1999 17:21:20 EDT Subject: Free... To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Windows AOL sub 41 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is FreeBSD totally free? Not like DRDOS (formerly OpenDOS) where they trick you into thinking its free then it turns out its an evaluation... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:26:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from imo18.mx.aol.com (imo18.mx.aol.com [198.81.17.8]) by hub.freebsd.org (Postfix) with ESMTP id 924D914EA4 for ; Wed, 6 Oct 1999 14:26:02 -0700 (PDT) (envelope-from Quill235@aol.com) Received: from Quill235@aol.com by imo18.mx.aol.com (mail_out_v23.6.) id nXLBa22485 (4511) for ; Wed, 6 Oct 1999 17:23:54 -0400 (EDT) From: Quill235@aol.com Message-ID: <0.c0e2aa61.252d17e9@aol.com> Date: Wed, 6 Oct 1999 17:23:53 EDT Subject: again... To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Windows AOL sub 41 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Sorry to bother you AGAIN but I forgot one more question...can you use any UNIX Programs on FreeBSD? (e.g. perl) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:33:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id BB4D515488 for ; Wed, 6 Oct 1999 14:33:03 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 23803 invoked from network); 6 Oct 1999 20:53:18 -0000 Received: from userbg42.uk.uudial.com (HELO marder-1.) (62.188.142.162) by smtp.dial.pipex.com with SMTP; 6 Oct 1999 20:53:18 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id VAA11876; Wed, 6 Oct 1999 21:52:38 +0100 (BST) (envelope-from mark) Date: Wed, 6 Oct 1999 21:52:38 +0100 From: Mark Ovens To: questions@freebsd.org, ports@freebsd.org Subject: Build of linux_base-5.2 port fails Message-ID: <19991006215238.A400@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Having received my StarOffice CD from Sun :) I set about following the instructions at http://www.serv.net/~mcglk/staroffice-install.html which said to install the linux_base port. After ~2 hours of d/ling it bombed out during the build: gmake[1]: Leaving directory `/usr/ports/misc/rpm/work/rpm-2.5.5/popt' gmake[1]: Entering directory `/usr/ports/misc/rpm/work/rpm-2.5.5/misc' cc -I/usr/ports/misc/rpm/work/rpm-2.5.5 -I/usr/ports/misc/rpm/work/rpm-2.5.5 -O -pipe -I/usr/local/include -DHAVE_CONFIG_H -I/usr/ports/misc/rpm/work/rpm-2.5.5/lib -I/usr/ports/misc/rpm/work/rpm-2.5.5/misc -c getm ntent.c -o getmntent.o getmntent.c: In function `getmntent': getmntent.c:26: variable `item' has initializer but incomplete type getmntent.c:26: warning: excess elements in struct initializer after `item' getmntent.c:26: storage size of `item' isn't known gmake[1]: *** [getmntent.o] Error 1 gmake[1]: Leaving directory `/usr/ports/misc/rpm/work/rpm-2.5.5/misc' gmake: *** [make-subdirs] Error 1 *** Error code 2 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. *** Error code 1 Stop. What is causing this? I could fix it myself, but it's a port (last cvsup'd yesterday) so it should work. Also, it d/l rpm-2.2.5 twice: >> rpm-2.5.5-5.2.i386.rpm doesn't seem to exist on this system. >> Attempting to fetch from ftp://ftp.cdrom.com/pub/linux/redhat/old-releases/redhat-5.2/i386/RedHat/RPMS/. Receiving rpm-2.5.5-5.2.i386.rpm (427487 bytes): 100% 427487 bytes transferred in 267.0 seconds (1.56 Kbytes/s) and then again when doing ``make install'': marder-1# make install ===> Installing for linux_base-5.2 ===> linux_base-5.2 depends on executable: rpm - not found ===> Verifying install for rpm in /usr/ports/misc/rpm >> rpm-2.5.5.tar.gz doesn't seem to exist on this system. >> Attempting to fetch from ftp://ftp.rpm.org/pub/rpm/dist/rpm-2.5.x/. Receiving rpm-2.5.5.tar.gz (763155 bytes): 100% 763155 bytes transferred in 144.0 seconds (5.18 Kbytes/s) ===> Extracting for rpm-2.5.5 >> Checksum OK for rpm-2.5.5.tar.gz. 2 different versions of gdbm (1.7.3-17 & 1.8.0) were d/l'ed. Is the port broken, or is something screwed on my system? ``uname -a'' output: FreeBSD marder-1 3.3-STABLE FreeBSD 3.3-STABLE #1: Wed Oct 6 20:02:26 BST 1999 mark@marder-1:/usr/src/sys/compile/MARDER-1 i386 TIA. -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:45: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from implode.root.com (root.com [209.102.106.178]) by hub.freebsd.org (Postfix) with ESMTP id 98F5414EF9 for ; Wed, 6 Oct 1999 14:44:58 -0700 (PDT) (envelope-from dg@implode.root.com) Received: from implode.root.com (localhost [127.0.0.1]) by implode.root.com (8.8.8/8.8.5) with ESMTP id OAA03328; Wed, 6 Oct 1999 14:45:23 -0700 (PDT) Message-Id: <199910062145.OAA03328@implode.root.com> To: Quill235@aol.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Free... In-reply-to: Your message of "Wed, 06 Oct 1999 17:21:20 EDT." <0.c1cabe60.252d1750@aol.com> From: David Greenman Reply-To: dg@root.com Date: Wed, 06 Oct 1999 14:45:23 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >Is FreeBSD totally free? Not like DRDOS (formerly OpenDOS) where they trick >you into thinking its free then it turns out its an evaluation... Yes. You can download it for free from the Internet at ftp.freebsd.org or you can buy it on CDROM for $39.95 from http://www.cdrom.com. -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project - http://www.freebsd.org Creator of high-performance Internet servers - http://www.terasolutions.com Pave the road of life with opportunities. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:47:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from implode.root.com (root.com [209.102.106.178]) by hub.freebsd.org (Postfix) with ESMTP id 93DA214C28 for ; Wed, 6 Oct 1999 14:47:26 -0700 (PDT) (envelope-from dg@implode.root.com) Received: from implode.root.com (localhost [127.0.0.1]) by implode.root.com (8.8.8/8.8.5) with ESMTP id OAA03364; Wed, 6 Oct 1999 14:46:47 -0700 (PDT) Message-Id: <199910062146.OAA03364@implode.root.com> To: Quill235@aol.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: again... In-reply-to: Your message of "Wed, 06 Oct 1999 17:23:53 EDT." <0.c0e2aa61.252d17e9@aol.com> From: David Greenman Reply-To: dg@root.com Date: Wed, 06 Oct 1999 14:46:47 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >Sorry to bother you AGAIN but I forgot one more question...can you use any >UNIX Programs on FreeBSD? (e.g. perl) Yes, FreeBSD comes with perl and lots of other stuff. Check out http://www.freebsd.org. -DG David Greenman Co-founder/Principal Architect, The FreeBSD Project - http://www.freebsd.org Creator of high-performance Internet servers - http://www.terasolutions.com Pave the road of life with opportunities. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 14:48:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.webct.com (mail.webct.com [209.87.17.10]) by hub.freebsd.org (Postfix) with ESMTP id 4AB09156FB for ; Wed, 6 Oct 1999 14:48:11 -0700 (PDT) (envelope-from dfoo@ca.webct.com) Received: from ca.webct.com (ws74.webct.com [209.87.17.104]) by mail.webct.com (8.9.3/8.9.3) with ESMTP id OAA87347 for ; Wed, 6 Oct 1999 14:47:20 -0700 (PDT) Message-ID: <37FBC368.C1542B03@ca.webct.com> Date: Wed, 06 Oct 1999 14:47:20 -0700 From: Darren Foo Reply-To: dfoo@webct.com Organization: ULT Canada X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: HP Laserjet 1100 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I can't seem to get my Laserjet 1100 to print. The first time I tried lptest > /dev/lpt0 it just have me a single line. Not like the stairstep example in the handbook, just one single line. I added the filter listed in the handbook and now I get no text at all. The printer uses PCL 5e. I saw a port for converting DVI files to PCL... what is that for? -- Darren Foo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15: 6:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.kar.net (mail.kar.net [195.178.131.134]) by hub.freebsd.org (Postfix) with ESMTP id 4866C15773 for ; Wed, 6 Oct 1999 15:05:50 -0700 (PDT) (envelope-from kushn@mail.kar.net) Received: from 186.dialup.kar.net (186.dialup.kar.net [195.178.130.186]) by mail.kar.net (8.9.3/8.9.3) with ESMTP id AAA28836 for ; Thu, 7 Oct 1999 00:58:55 +0300 (EET DST) Date: Thu, 7 Oct 1999 01:00:57 +0300 (EEST) From: Vladimir Kushnir X-Sender: volodya@kushnir.kiev.ua To: freebsd-questions@FreeBSD.ORG Subject: XKB settings for Russian keyboard wuth XFree86 3.3.5? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, Does anybody set these with 3.3.5 (I mean, _not_ through Xmodmap)? If so, would you please post them? For some reason, my old 3.3.3.1 settings (and those in Handbook) doesn't work anymore, particularly - CapsLock doesn't switch groups. Has something changed there? Thanks in advance, Vladimir ===========================|======================= Vladimir Kushnir | kushn@mail.kar.net, | Powered by FreeBSD kushnir@ap3.bitp.kiev.ua | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15: 6:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mug.adhesivemedia.com (mug.adhesivemedia.com [207.202.159.73]) by hub.freebsd.org (Postfix) with ESMTP id 750AB15776; Wed, 6 Oct 1999 15:06:07 -0700 (PDT) (envelope-from philip@adhesivemedia.com) Received: from localhost (philip@localhost) by mug.adhesivemedia.com (8.9.3/8.9.3) with ESMTP id PAA04893; Wed, 6 Oct 1999 15:07:13 -0700 (PDT) (envelope-from philip@adhesivemedia.com) Date: Wed, 6 Oct 1999 15:07:13 -0700 (PDT) From: Philip Hallstrom To: Matthew Jacob Cc: freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG [which dds drive to get snipped] > I have to say I've been disappointed by low end DATs. If you can, go to > www.corpsys.com and get the older Archive DDS2 4 slot changer- it's only > 500$. Otherwise, I say spend more money and get an HP DDS3 drive. > > I have to say that the TR4/TR5 clones that HP seems to be building seem > pretty good. Media is expensive though. Are they decent drives? I didn't include them in my list due to the number of posts in these mailing lists complaining about them. The drive itself seems a lot cheaper. Media seems to be about $30... so if you don't need many tapes is that a good way to go? -philip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15:35:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.Stanford.EDU (smtp2.Stanford.EDU [171.64.14.23]) by hub.freebsd.org (Postfix) with ESMTP id 12D1E15787 for ; Wed, 6 Oct 1999 15:35:36 -0700 (PDT) (envelope-from cscox@jps.net) Received: from WuKong (wukong.Stanford.EDU [171.66.40.72]) by smtp2.Stanford.EDU (8.9.3/8.9.3/L) with SMTP id PAA10087 for ; Wed, 6 Oct 1999 15:34:59 -0700 (PDT) Message-ID: <000801bf104b$07388740$482842ab@Stanford.EDU> From: "Charles Cox" To: Subject: Can't find localhost Date: Wed, 6 Oct 1999 15:34:57 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01BF1010.58543CE0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0005_01BF1010.58543CE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hell(o) everyone, I have just installed freebsd 3.3 on my Pentium class system. I am = still using the generic kernal, although the rebuild is on its way... I = have a newly supported (thanks guys) 3c905c-TX NIC. All of the networking seems to be working fine, with the exception = of one thing, and that it I cannot ping myself. I get an ARPresolve = failure. I was thinking that there was a DNS problem, since I am using = an external server, but that wasn't it. I checked ifconfig -a, and = found that my 3c905c is working in half-duplex mode. Could this be the = problem? Thanks in advance. Chuck ------=_NextPart_000_0005_01BF1010.58543CE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hell(o) everyone,
    I have just = installed freebsd=20 3.3 on my Pentium class system.  I am still using the generic = kernal,=20 although the rebuild is on its way...  I have a newly supported = (thanks=20 guys) 3c905c-TX NIC.
    All of the = networking seems to=20 be working fine, with the exception of one thing, and that it I cannot = ping=20 myself.  I get an ARPresolve failure.  I was thinking that = there was a=20 DNS problem, since I am using an external server, but that wasn't = it.  I=20 checked ifconfig -a, and found that my 3c905c is working in half-duplex=20 mode.  Could this be the problem?
 
Thanks in advance.
Chuck
 
------=_NextPart_000_0005_01BF1010.58543CE0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15:37: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from indyweb.cgocable.ca (indyweb.cgocable.ca [205.151.69.200]) by hub.freebsd.org (Postfix) with ESMTP id 58D801505D for ; Wed, 6 Oct 1999 15:36:03 -0700 (PDT) (envelope-from foub@globetrotter.net) Received: from windows.cgocable.ca (141-154.ri.cgocable.ca [24.226.141.154]) by indyweb.cgocable.ca (8.9.3/8.9.3) with SMTP id SAA7026920 for ; Wed, 6 Oct 1999 18:35:50 -0400 (EDT) Message-ID: <000501bf104b$240719e0$0201a8c0@cgocable.ca> From: "Guillaume Paquet" To: Subject: patch Date: Wed, 6 Oct 1999 18:35:49 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is there a patch for the RAID controllers " Mylex" ? I have FreeBSD 3.3-RELEASE... If yes, how do I apply it? Guillaume Paquet foub@globetrotter.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15:46:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 4FC3F1578A for ; Wed, 6 Oct 1999 15:45:02 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 40259 invoked by uid 1001); 6 Oct 1999 22:43:23 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 6 Oct 1999 22:43:23 -0000 Date: Wed, 6 Oct 1999 18:43:22 -0400 (EDT) From: Jaime Kikpole To: freebsd-questions@freebsd.org Subject: Booting from RAID5 array? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is it possible to boot FreeBSD (3.3-Release) from a RAID-5 array? Specifically, I'm trying to get this to work on a Netfinity 5000, a DPT SmartCache IV, and 4 SCSI hot-swapable drives in the Netfinity's bays. I've unplugged the SCSI cables from the Netfinity's mother board and plugged them into the DPT card. Then I used the DPT configuration software (I had to run it from a MS-DOS boot floppy... bleh) to make a single array that contained all four disks. The FreeBSD 3.3 boot floppies recognised this array as da0, which it claimed was 26000+ MB large. Since its made from four 9.1GB drives, I thought that that number sounded right. The boot floppies claimed to install FreeBSD 3.3 off of the FTP site (although it complained that there was no distribution named "local" to install....) and everything looked OK as far as I could tell. But when I reboot, it can't find a bootable disk. As for my experience, I've never worked with SCSI before except for external devices on Macintosh computers. Its entirely possible that I did something dumb, so feel free to grasp at straws if you have any ideas for me to try! :) Also, I've never worked with RAID before. So if there's some special "blessing" that I have to do on the drive or if FreeBSD just can't boot from a RAID array, please let me know. BTW, the only suggestion (so far) that made some level of sense was to switch to Linux. Is this really going to be necessary? Between my FreeBSD experience and Linux's "patch of the hour" approach, I'd rather not do that. Thanks in advance! Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15:48:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 25F311577E for ; Wed, 6 Oct 1999 15:48:39 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 10002 invoked from network); 6 Oct 1999 22:48:36 -0000 Received: from userbr37.uk.uudial.com (HELO marder-1.) (62.188.146.230) by smtp.dial.pipex.com with SMTP; 6 Oct 1999 22:48:36 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id XAA12136; Wed, 6 Oct 1999 23:48:30 +0100 (BST) (envelope-from mark) Date: Wed, 6 Oct 1999 23:48:30 +0100 From: Mark Ovens To: Doug Flock Cc: questions@freebsd.org Subject: Re: SU command Message-ID: <19991006234830.C400@marder-1> References: <01BF1004.91E96950.dougf@mccue.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <01BF1004.91E96950.dougf@mccue.com> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 02:10:39PM -0700, Doug Flock wrote: > Mark, > > I have group "wheel"; small "w". > > I entered password correctly. > > Only error is one I outlined. > OK. su normally prints the message you see to the console (/dev/ttyv0) and also prints another message (such as "Sorry") at the prompt you tried to su from. Did you see anything else? Checking the source you should be seeing one of: Sorry Sorry - account expired These are the only 2 associated with the "BAD SU" error, and both are password related. > Doug > > -----Original Message----- > From: Mark Ovens [SMTP:mark@dogma.freebsd-uk.eu.org] > Sent: Wednesday, October 06, 1999 10:47 AM > To: Jason C. Wells > Cc: Douglas Flock; freebsd-questions@freebsd.org > Subject: Re: SU command > > On Wed, Oct 06, 1999 at 10:04:53PM +0000, Jason C. Wells wrote: > > On Tue, 5 Oct 1999, Douglas Flock wrote: > > > > >Folks, > > > > > >I am getting an error using the SU command: > > > > > > Oct 2 06:08:38 myname SU: BAD SU > > >dougf to root on /dev/ttyE0 > > > > > >I have user as member of group Wheel, as required. > > > > > >What am I missing? Is something corrupted? > > > > Da you have the correct user in group wheel? Do you have the right syntax > > in /etc/groups? > > > > You said group Wheel. Did you mean group wheel? > > > > You get that error when you get the password wrong. > > > IIRC, if you have group wheel problem su will say something like "not a > > member of group wheel" > > > > Thank You, | http://students.washington.edu/jcwells > > Jason Wells | "Those who would trade freedom for security deserve neither > > | freedom nor security." - Benjamin Franklin > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > -- > STATE-OF-THE-ART: Any computer you can't afford. > OBSOLETE: Any computer you own. > ________________________________________________________________ > FreeBSD - The Power To Serve http://www.freebsd.org > My Webpage http://ukug.uk.freebsd.org/~mark/ > mailto:mark@ukug.uk.freebsd.org http://www.radan.com > -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15:53:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns2.healtheon.com (ns2.healtheon.com [207.12.181.125]) by hub.freebsd.org (Postfix) with ESMTP id 17EDF151D8 for ; Wed, 6 Oct 1999 15:53:49 -0700 (PDT) (envelope-from minhh@healtheon.com) Received: from hscape.healtheon.com ([208.25.212.6]) by ns2.healtheon.com (8.9.3/8.9.3) with ESMTP id QAA10985 for ; Wed, 6 Oct 1999 16:11:45 -0700 Received: from helios.sf.healtheon.com (helios.sf.healtheon.com [10.190.1.5]) by hscape.healtheon.com (8.9.1/8.9.1) with ESMTP id PAA11492 for ; Wed, 6 Oct 1999 15:53:40 -0700 (PDT) Received: from healtheon.com ([10.190.1.130]) by helios.sf.healtheon.com (8.9.1/8.9.1) with ESMTP id PAA10358 for ; Wed, 6 Oct 1999 15:53:39 -0700 (PDT) Message-ID: <37FBD2EA.E3F2A7BD@healtheon.com> Date: Wed, 06 Oct 1999 15:53:30 -0700 From: Minh Huynh X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: zh-TW,en,zh,zh-CN MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: can't change password Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am running FreeBSD version 3.1 and am having trouble changing password. This is what I got when trying to change password: passwd: /etc/master.passwd: corrupted entry passwd: /etc/master.passwd: unchanged Please let me how I can fix this problem. Thanks, Minh To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 15:57: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f325.hotmail.com [207.82.251.213]) by hub.freebsd.org (Postfix) with SMTP id 511051578A for ; Wed, 6 Oct 1999 15:56:13 -0700 (PDT) (envelope-from tool_sucks@hotmail.com) Received: (qmail 56459 invoked by uid 0); 6 Oct 1999 22:56:12 -0000 Message-ID: <19991006225612.56458.qmail@hotmail.com> Received: from 24.113.31.229 by www.hotmail.com with HTTP; Wed, 06 Oct 1999 15:56:11 PDT X-Originating-IP: [24.113.31.229] From: "Ralph Wiggum" To: questions@freebsd.org Subject: amount of space for a FreeBSD 3.2 installation Date: Wed, 06 Oct 1999 15:56:11 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ok..just got a quick question here. How much space will I need for a full FreeBSD 3.2 install? I have the 4 CD set. Please respond ASAP Thanks ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16: 0:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id E02FF1578E for ; Wed, 6 Oct 1999 16:00:41 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.251]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id RAA88246; Wed, 6 Oct 1999 17:58:38 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <001a01bf104e$54c2a880$fba3f9cf@megared.net.mx> Reply-To: "Alejandro Ramirez" From: "Alejandro Ramirez" To: "Charles Cox" , References: <000801bf104b$07388740$482842ab@Stanford.EDU> Subject: RE: Can't find localhost Date: Wed, 6 Oct 1999 17:58:40 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0016_01BF1024.6BA97D00" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0016_01BF1024.6BA97D00 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, Check out the 3.3 Release-Errata page: http://www.freebsd.org/releases/3.3R/errata.html Ales ----- Original Message ----- From: Charles Cox To: freebsd-questions@FreeBSD.ORG Sent: Wednesday, October 06, 1999 5:34 PM Subject: Can't find localhost Hell(o) everyone, I have just installed freebsd 3.3 on my Pentium class system. I am still using the generic kernal, although the rebuild is on its way... I have a newly supported (thanks guys) 3c905c-TX NIC. All of the networking seems to be working fine, with the exception of one thing, and that it I cannot ping myself. I get an ARPresolve failure. I was thinking that there was a DNS problem, since I am using an external server, but that wasn't it. I checked ifconfig -a, and found that my 3c905c is working in half-duplex mode. Could this be the problem? Thanks in advance. Chuck ------=_NextPart_000_0016_01BF1024.6BA97D00 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi,
 
Check out the 3.3 Release-Errata = page:
 
http://www.free= bsd.org/releases/3.3R/errata.html
 
Ales
 
----- Original Message -----
From:=20 Charles Cox =
To: freebsd-questions@FreeBSD.ORG =
Sent: Wednesday, October 06, = 1999 5:34=20 PM
Subject: Can't find = localhost

Hell(o) everyone,
    I have just = installed freebsd=20 3.3 on my Pentium class system.  I am still using the generic = kernal,=20 although the rebuild is on its way...  I have a newly supported = (thanks=20 guys) 3c905c-TX NIC.
    All of the = networking seems to=20 be working fine, with the exception of one thing, and that it I cannot = ping=20 myself.  I get an ARPresolve failure.  I was thinking that = there was=20 a DNS problem, since I am using an external server, but that wasn't = it. =20 I checked ifconfig -a, and found that my 3c905c is working in = half-duplex=20 mode.  Could this be the problem?
 
Thanks in advance.
Chuck
 
------=_NextPart_000_0016_01BF1024.6BA97D00-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16: 1: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from wank.necropolis.org (wank.westin16.flyingcroc.net [207.246.128.93]) by hub.freebsd.org (Postfix) with ESMTP id 12D6215798 for ; Wed, 6 Oct 1999 16:00:41 -0700 (PDT) (envelope-from todd@flyingcroc.net) Received: from localhost (todd@localhost) by wank.necropolis.org (8.9.3/8.9.3) with ESMTP id QAA85177; Wed, 6 Oct 1999 16:06:28 -0700 (PDT) (envelope-from todd@flyingcroc.net) X-Authentication-Warning: wank.necropolis.org: todd owned process doing -bs Date: Wed, 6 Oct 1999 16:06:28 -0700 (PDT) From: Todd Backman X-Sender: todd@wank.necropolis.org To: Charles Cox Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Can't find localhost In-Reply-To: <000801bf104b$07388740$482842ab@Stanford.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Have you removed: network_interfaces="lo0" ifconfig_lo0="inet 127.0.0.1" from /etc/rc.conf or /etc/defaults/rc.conf? - Todd On Wed, 6 Oct 1999, Charles Cox wrote: > Hell(o) everyone, > I have just installed freebsd 3.3 on my Pentium class system. I am still using the generic kernal, although the rebuild is on its way... I have a newly supported (thanks guys) 3c905c-TX NIC. > All of the networking seems to be working fine, with the exception of one thing, and that it I cannot ping myself. I get an ARPresolve failure. I was thinking that there was a DNS problem, since I am using an external server, but that wasn't it. I checked ifconfig -a, and found that my 3c905c is working in half-duplex mode. Could this be the problem? > > Thanks in advance. > Chuck > > ========================================================================= Todd Backman "there are two major products Network Systems Admin that came out of berkeley Flying Crocodile, Inc. lsd and unix. Seattle, WA we don't believe this to be "chaos is a good teacher..." a coincidence." j.s.anderson ========================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16: 1:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from alastair.tir.com (alastair.tir.com [216.40.128.69]) by hub.freebsd.org (Postfix) with ESMTP id C55051578B for ; Wed, 6 Oct 1999 16:01:06 -0700 (PDT) (envelope-from username@tir.com) Received: from jason (port34.mico18.tir.com [216.40.139.127]) by alastair.tir.com (8.9.1/8.9.1) with SMTP id TAA29876; Wed, 6 Oct 1999 19:00:22 -0400 (EDT) Message-ID: <000a01bf104e$95e57680$040aa8c0@jason> From: "Jason" To: "Charles Cox" Cc: References: <000801bf104b$07388740$482842ab@Stanford.EDU> Subject: Re: Can't find localhost Date: Wed, 6 Oct 1999 19:00:28 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG When you say you couldn't ping yourself is that a 127.0.0.1 or another IP that you assigned to the interface? Half-duplex just means that it is not using bi-directional communication, it shouldn't have an effect the ability to ping the interface. If you could post the ifconfig -a results that would help a bit... -Jason ----- Original Message ----- From: Charles Cox To: Sent: Wednesday, October 06, 1999 6:34 PM Subject: Can't find localhost Hell(o) everyone, I have just installed freebsd 3.3 on my Pentium class system. I am still using the generic kernal, although the rebuild is on its way... I have a newly supported (thanks guys) 3c905c-TX NIC. All of the networking seems to be working fine, with the exception of one thing, and that it I cannot ping myself. I get an ARPresolve failure. I was thinking that there was a DNS problem, since I am using an external server, but that wasn't it. I checked ifconfig -a, and found that my 3c905c is working in half-duplex mode. Could this be the problem? Thanks in advance. Chuck To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:13:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id D71F014CE3 for ; Wed, 6 Oct 1999 16:13:25 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19758 invoked from network); 6 Oct 1999 22:14:01 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:01 -0000 From: "Ion Mihai Tetcu" To: dkwiebe@hagenhomes.com Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD-Server, Win98-Client Reply-To: itetcu@go.ro Cc: questions@FreeBSD.ORG In-reply-to: <37FA2CAD.1FE3184E@mail.cadvision.com> X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231339.D71F014CE3@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In 5 Oct 99, la 10:51, Darren WIebe a scris: > > Questions: > > 1. Is all the hardware supported ? Do i have to rebuild the kernel for > > processors (and how) ? > > I'm afraid I don't know... > > > 2. Can you point me to some good (for a beginner) Samba > > resources? > > Have you looked at www.samba.org?? Yep; i was asking if you, the ones who now samba better then i, happen to know other interesting web pages about it. > > 3. We will have a dial-up connection to the ISP, and I want the > > server to be able to dial when someone on the win98 boxes want to > > connect. > > ppp -alias -demand isp, will work for that, look in the handbook. > > > 4. Depends on the user of the win98 boxes, the connection > > will/won`t be done or it will be done between, let`s say 23h and 7 h . Sorry for not being clear enough. I am wondering what is the best (read: the most transparent for the users of the win98 computers) way to authentificate them in order to provide or not the connection to the net. I will have two groups of users: one that will be allowed to connect at any time and the other that will be allowed only between some hours. > > 5. The server will check the ISP for new mail every 2 h. > /usr/ports/fetchmail - I use this, it works very well. > > > 6. How can i record the IP addresses that the users acces from the > > win98 boxes ? We want to see if he`s gest playing around on the > > net or he is also doing some work. > > > 7. Tell me about your favorite (free) HTML editor under FreeBSD. > > Until now I`ve worked with Netscape, HomeSite, HotMetalPro and > > Notepad for the web design and i would like to swich under > > FreeBSD for the web design work. > > Netscape runs under FreeBSD with linux compatability installed. > > > > Merci for the answers, wish you the best, > > Ionut > > > > Ion Mihai Tetcu > > itetcu@go.ro > > Hope this helps It really does, thank you, Ionut. > Darren Wiebe > dkwiebe@hagenhomes.com Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:14:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 7079514CE3 for ; Wed, 6 Oct 1999 16:14:00 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19790 invoked from network); 6 Oct 1999 22:14:02 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:02 -0000 From: "Ion Mihai Tetcu" To: Matthias Teege Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: [Q] FreeBSD&Mac Reply-To: itetcu@go.ro Cc: freebsd-questions@FreeBSD.ORG In-reply-to: <19991005081436.A27006@moon.mteege.de> References: <19991004214656.EFC3615043@hub.freebsd.org> X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231412.7079514CE3@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In 5 Oct 99, la 8:14, Matthias Teege a scris: > On Tue, Oct 05, 1999 at 12:45:33AM +0200, Ion Mihai Tetcu wrote: > > Hi, > > > > Is there any way to cp files from/to a Mac floppy ? > > If not how can it be done under DOS ? > > cd /usr/ports/emulators/macutils > make install > > Matthias Danke schon. Ionut > -- > Matthias Teege -- matthias@mteege.de -- http://emugs.de > make world not war > PGP-Key auf Anfrage > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:15:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 569A714EA4 for ; Wed, 6 Oct 1999 16:14:32 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19818 invoked from network); 6 Oct 1999 22:14:03 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:03 -0000 From: "Ion Mihai Tetcu" To: questions@FreeBSD.ORG Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: [Q] FreeBSD on dual PII Reply-To: itetcu@go.ro X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231445.569A714EA4@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Does FreeBSD run on a Dual PII system ? If yes, do I have to rebuild the kernel (and how exactly, as i don`t remember seeing in LINT anything about that). Thanks, Ionut Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:15:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 1C99F14EA4 for ; Wed, 6 Oct 1999 16:15:07 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19818 invoked from network); 6 Oct 1999 22:14:03 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:03 -0000 From: "Ion Mihai Tetcu" To: questions@FreeBSD.ORG Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: [Q] FreeBSD on dual PII Reply-To: itetcu@go.ro X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231519.1C99F14EA4@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Does FreeBSD run on a Dual PII system ? If yes, do I have to rebuild the kernel (and how exactly, as i don`t remember seeing in LINT anything about that). Thanks, Ionut Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:15:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 5F39514ECF for ; Wed, 6 Oct 1999 16:15:19 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19980 invoked from network); 6 Oct 1999 22:14:30 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:30 -0000 From: "Ion Mihai Tetcu" To: Brett Taylor Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD-Server, Win98-Client Reply-To: itetcu@go.ro Cc: questions@FreeBSD.ORG References: <37FA2CAD.1FE3184E@mail.cadvision.com> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231527.5F39514ECF@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In 5 Oct 99, la 13:31, Brett Taylor a scris: > Hi, > > On Tue, 5 Oct 1999, Darren WIebe wrote: > > > > 7. Tell me about your favorite (free) HTML editor under FreeBSD. > > > Until now I`ve worked with Netscape, HomeSite, HotMetalPro and > > > Notepad for the web design and i would like to swich under > > > FreeBSD for the web design work. > > > > Netscape runs under FreeBSD with linux compatability installed. > > Netscape runs natively too - look in the ports collection; 4.7 just got > committed. > > In terms of other HTML editors there are a number out there - you can try > asWedit (in ports - www/aswedit), ashe (also in ports), Coffee (not in the > ports at present) and lots of others. Of course vi always works. :-) Thanks for the info`s. What do you prefer? Is it worthing to wait for the 4.0 (for the network) or should i start installing the 3.3 ? Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:15:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id DACC015781 for ; Wed, 6 Oct 1999 16:15:20 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19980 invoked from network); 6 Oct 1999 22:14:30 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:30 -0000 From: "Ion Mihai Tetcu" To: Brett Taylor Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD-Server, Win98-Client Reply-To: itetcu@go.ro Cc: questions@FreeBSD.ORG References: <37FA2CAD.1FE3184E@mail.cadvision.com> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231529.DACC015781@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In 5 Oct 99, la 13:31, Brett Taylor a scris: > Hi, > > On Tue, 5 Oct 1999, Darren WIebe wrote: > > > > 7. Tell me about your favorite (free) HTML editor under FreeBSD. > > > Until now I`ve worked with Netscape, HomeSite, HotMetalPro and > > > Notepad for the web design and i would like to swich under > > > FreeBSD for the web design work. > > > > Netscape runs under FreeBSD with linux compatability installed. > > Netscape runs natively too - look in the ports collection; 4.7 just got > committed. > > In terms of other HTML editors there are a number out there - you can try > asWedit (in ports - www/aswedit), ashe (also in ports), Coffee (not in the > ports at present) and lots of others. Of course vi always works. :-) Thanks for the info`s. What do you prefer? Is it worthing to wait for the 4.0 (for the network) or should i start installing the 3.3 ? Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 16:15:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id B13CD1534E for ; Wed, 6 Oct 1999 16:15:20 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 19790 invoked from network); 6 Oct 1999 22:14:02 -0000 Received: from unknown (HELO tim) (192.168.1.4) by cache.ima-info.ro with SMTP; 6 Oct 1999 22:14:02 -0000 From: "Ion Mihai Tetcu" To: Matthias Teege Date: Thu, 7 Oct 1999 02:11:41 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: [Q] FreeBSD&Mac Reply-To: itetcu@go.ro Cc: freebsd-questions@FreeBSD.ORG In-reply-to: <19991005081436.A27006@moon.mteege.de> References: <19991004214656.EFC3615043@hub.freebsd.org> X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991006231529.B13CD1534E@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In 5 Oct 99, la 8:14, Matthias Teege a scris: > On Tue, Oct 05, 1999 at 12:45:33AM +0200, Ion Mihai Tetcu wrote: > > Hi, > > > > Is there any way to cp files from/to a Mac floppy ? > > If not how can it be done under DOS ? > > cd /usr/ports/emulators/macutils > make install > > Matthias Danke schon. Ionut > -- > Matthias Teege -- matthias@mteege.de -- http://emugs.de > make world not war > PGP-Key auf Anfrage > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 17:15:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lsmls02.we.mediaone.net (lsmls02.we.mediaone.net [24.130.1.15]) by hub.freebsd.org (Postfix) with ESMTP id D612F1579A for ; Wed, 6 Oct 1999 17:15:15 -0700 (PDT) (envelope-from stealth93@mediaone.net) Received: from pent400 (we-24-30-125-91.we.mediaone.net [24.30.125.91]) by lsmls02.we.mediaone.net (8.8.7/8.8.7) with SMTP id RAA26509 for ; Wed, 6 Oct 1999 17:14:26 -0700 (PDT) Reply-To: From: "Stealth93" To: Date: Wed, 6 Oct 1999 17:17:09 -0700 Message-ID: <000a01bf1059$4c1bfe60$f61afea9@we.mediaone.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Pardon me if the question seems silly but I am new to the BSD world and could not find the answer searching the FAQ or Handbook. I recently set up a BSD Mail Server at the office and accidentally created a Boot Mgr. on install which was unnecessary as there is only one drive and one OS on the machine. This causes a problem when re-booting the machine remotely. Is there a simple way to remove the boot manager and leave the rest of the disk intact? Any help would be appreciated. Thanks Ken Spraker stealth93@mediaone.net kens@micro2000.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 17:44:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.cybcon.com (mail.cybcon.com [216.190.188.5]) by hub.freebsd.org (Postfix) with ESMTP id 1E609157A4 for ; Wed, 6 Oct 1999 17:43:59 -0700 (PDT) (envelope-from wwoods@cybcon.com) Received: from freebsd.cybcon.com (william@usr1-31.cybcon.com [205.147.75.32]) by mail.cybcon.com (8.9.0/8.9.0) with SMTP id RAA29645 for ; Wed, 6 Oct 1999 17:42:46 -0700 (PDT) From: william woods Reply-To: wwoods@cybcon.com To: freebsd-questions@freebsd.org Subject: system monitor apps... Date: Wed, 6 Oct 1999 17:39:26 -0700 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100617411900.00393@freebsd.cybcon.com> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a "headless box" here on my lan and I am looking for a way to monitor the cpu, memory and swap useage on it from aneother networked system. Any ideas for me on this? William Woods FreeBSD 3.3-Stable -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GIT d++ s+:+ a C+++ UB+++ P+ L++ E- W++ N+ o+ K- w O- M-- V PS-- PE++ Y+ PGP t+ 5+ X R- tv- b++ DI+ D G e++ h---- r+++ y++++ ------END GEEK CODE BLOCK------ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:19:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from news-ma.rhein-neckar.de (news-ma.rhein-neckar.de [193.197.90.3]) by hub.freebsd.org (Postfix) with ESMTP id E69B515089 for ; Wed, 6 Oct 1999 18:19:01 -0700 (PDT) (envelope-from daemon@bigeye.rhein-neckar.de) Received: from bigeye.rhein-neckar.de (uucp@localhost) by news-ma.rhein-neckar.de (8.8.8/8.8.8) with bsmtp id DAA07483 for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 03:18:42 +0200 (CEST) (envelope-from daemon@bigeye.rhein-neckar.de) Received: (from daemon@localhost) by bigeye.rhein-neckar.de (8.9.3/8.9.3) id CAA89883 for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 02:29:04 +0200 (CEST) (envelope-from daemon) From: naddy@mips.rhein-neckar.de (Christian Weisgerber) Subject: Re: make -j while building and installing world Date: 7 Oct 1999 02:29:03 +0200 Message-ID: <7tgpgf$2nod$1@bigeye.rhein-neckar.de> References: <01bf100f$e90a8d80$0000e9c1@serv2.binep.ac.ru> To: freebsd-questions@freebsd.org Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Igor B. Bykhalo wrote: > Can -j N option for make be used when building > and installing world on the uniprocessor machine? Yes. > If yes, for what processor (486, 586, etc.) it makes > sence to use it, and with what N? Hard to say. On a single CPU machine, the only point is to keep the CPU busy even when one process is waiting for I/O. I doubt that N > 2 makes much sense. -- Christian "naddy" Weisgerber naddy@mips.rhein-neckar.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:27:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.ilstu.edu (mail.ilstu.edu [138.87.4.2]) by hub.freebsd.org (Postfix) with ESMTP id 858EA15089 for ; Wed, 6 Oct 1999 18:27:10 -0700 (PDT) (envelope-from fordp@guide.chi.il.us) Received: from zaphod (south212028.resnet.ilstu.edu [138.87.212.28]) by mail.ilstu.edu (8.9.2/8.9.2) with SMTP id UAA11214; Wed, 6 Oct 1999 20:26:18 -0500 (CDT) Message-Id: <3.0.3.32.19991006202750.0169dd78@pop.interaccess.com> X-Sender: fordp@pop.interaccess.com X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.3 (32) Date: Wed, 06 Oct 1999 20:27:50 -0500 To: itetcu@go.ro From: Ford Prefect Subject: Re: [Q] FreeBSD on dual PII Cc: freebsd-questions@freebsd.org In-Reply-To: <19991006231445.569A714EA4@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG From the FAQ: SMP is supported in 3.0-STABLE and later releases only. But you will need to rebuild the kernel. The info you need is as follows. (From the GENERIC kernel, uncomment as needed) # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs See: http://lxr.linux.no/freebsd/source/i386/conf/GENERIC#L52 or http://lxr.linux.no/freebsd/source/i386/conf/LINT#L87 or just /sys/i386/conf/LINT and /sys/i386/conf/GENERIC -Steve At 02:11 AM 10/7/99 +0200, you wrote: >Hi, > >Does FreeBSD run on a Dual PII system ? >If yes, do I have to rebuild the kernel (and how exactly, as i don`t >remember seeing in LINT anything about that). > >Thanks, >Ionut >Ion Mihai Tetcu >itetcu@go.ro >--------------------------------------------------------------------------- ---- >Get a free e-mail and 10M webspace at http://www.home.ro/ > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > *=====================================================* \ Ford Prefect Ahead of my time. \ \ fordp@guide.chi.il.us but only by a week. \ \ homepage.interaccess.com/~fordp \ \ \ \ ((In esperanto where available)) \ *=====================================================* To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:27:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mail.yahoo.com (smtp.mail.yahoo.com [128.11.68.32]) by hub.freebsd.org (Postfix) with SMTP id D82C6152F3 for ; Wed, 6 Oct 1999 18:27:22 -0700 (PDT) (envelope-from kenwills@yahoo.com) Received: from 1cust58.tnt1.madison.wi.da.uu.net (HELO spanky.yaberk.int) (63.20.241.58) by smtp.mail.yahoo.com with SMTP; 6 Oct 1999 18:33:04 -0700 Date: Wed, 6 Oct 1999 20:17:04 -0500 (CDT) From: Ken Wills Reply-To: kenwills@yahoo.com To: Marko Vidberg Cc: freebsd-questions@freebsd.org Subject: Re: Trying to install php... problems In-Reply-To: <02ed01bf0ee8$401235c0$eaca7018@cambr1.on.wave.home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 4 Oct 1999, Marko Vidberg wrote: > I am trying to install php2 (yes, the old version) onto a new Freebsd > release and am having some compilation problems. > > I am getting the error: > > db.c: In function "ListSupportDBs" > db.c: 55: 'gdbm_version' undeclared > *** Error code 1 > > Now, my question is... what is gdbm and what should I do to resolve this > problem? > Thanks for any help. > cd /usr/ports/databases/gdbm cat pkg/DESCR make install and try again. You may want to check what version of gdbm this version of PHP wants. Ken __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:34:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 8EEE115089 for ; Wed, 6 Oct 1999 18:33:13 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11Z2Qd-000J78-00; Thu, 7 Oct 1999 02:33:07 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id CAA39355 for ; Thu, 7 Oct 1999 02:33:07 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Thu, 7 Oct 1999 02:33:07 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: Netscape 4.7 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Does it make sense to get the Linux version? I've heard it may run better or have more plugins. Or is the native FBSD good enough? I'm running 3.2. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:55:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp6.mindspring.com (smtp6.mindspring.com [207.69.200.110]) by hub.freebsd.org (Postfix) with ESMTP id E108815736 for ; Wed, 6 Oct 1999 18:55:19 -0700 (PDT) (envelope-from computerdeity@geocities.com) Received: from neo-dominion ([209.138.54.219]) by smtp6.mindspring.com (8.8.5/8.8.5) with SMTP id VAA18360 for ; Wed, 6 Oct 1999 21:54:11 -0400 (EDT) From: ciro To: questions@freebsd.org Subject: Silo Overflows (AGAIN!) Date: Wed, 6 Oct 1999 21:54:47 -0400 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100621590100.17968@neo-dominion> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hey all, I'm using FBSD 3.2 stable with an AMD-k6/2 (300MHz) and a Motorola 56k(V.90) external modem on COM2, and a Genius netmouse on COM1. I constantly get messages to the effect of /kernel: sio0: ## more silo overflows (### total). Everyone in the archives says "Don't worry too much about it" except it is VERY annoyig when it pops up on your console window every 14 seconds or so. If no one knows how to fix it, does anyone have any idea as to how to supress the messages? Another question... Am I crazy, or is sio0 == COM1... if so, why the heck is my MOUSE making my computer angry? Thanks Ciro D. Maietta computerdeity@geocities.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:57: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id E254715736 for ; Wed, 6 Oct 1999 18:56:12 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id GAA13288; Thu, 7 Oct 1999 06:54:06 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id HAA01220; Thu, 7 Oct 1999 07:26:21 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id GAA00380; Thu, 7 Oct 1999 06:39:03 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Thu, 7 Oct 1999 06:38:42 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Minh Huynh Cc: freebsd-questions@FreeBSD.ORG Subject: Re: can't change password In-Reply-To: <37FBD2EA.E3F2A7BD@healtheon.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- FreeBSD has (at least) two password encryption shemes: DES (... regular) entry in /etc/master.passwd MD5 - encoded password starts with $1$ in case if you installed DES and uninstalled it later, there could be DES entries, which are not acceptiable Regards, (îÁÉÌÕÞÛÉÅ ÐÏÖÅÌÁÎÉÑ) Ilia Chipitsine (éÌØÑ ûÉÐÉÃÉÎ) On Wed, 6 Oct 1999, Minh Huynh wrote: > I am running FreeBSD version 3.1 and am having trouble changing > password. This is what I got when trying to change password: > > passwd: /etc/master.passwd: corrupted entry > passwd: /etc/master.passwd: unchanged > > Please let me how I can fix this problem. > > Thanks, > Minh > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/vrleRxlWKN2EXhAQE5PAMAj6C0w1CdqZIZcvrxN9lPy4WWAWLW7C4I vnU9XxapRirExOuoWu/v/ICZrqaPJfPCs5S3DLu3V81aJwtZjtixprssGaBwFMVX 45xv5Ip6c+D2rA2XsfLrJrKa2XDS6lkg =lnS6 -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 18:57: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mobil.surnet.ru (mobil.surnet.ru [195.54.2.7]) by hub.freebsd.org (Postfix) with ESMTP id 63ACA15762 for ; Wed, 6 Oct 1999 18:56:35 -0700 (PDT) (envelope-from ilia@cgilh.chel.su) Received: (from uucgilh@localhost) by mobil.surnet.ru (8.9.1a/8.9.1) with UUCP id GAA13290; Thu, 7 Oct 1999 06:54:08 +0500 (UST) Received: (from uucp@localhost) by cgilh.chel.su (8.8.7/8.8.7) with UUCP id HAA01228; Thu, 7 Oct 1999 07:26:22 +0600 Received: from localhost (ilia@localhost) by localhost.cgu.chel.su (8.9.3/8.9.2) with ESMTP id HAA00464; Thu, 7 Oct 1999 07:21:09 +0600 (ESS) (envelope-from ilia@cgilh.chel.su) X-Authentication-Warning: localhost.cgu.chel.su: ilia owned process doing -bs Date: Thu, 7 Oct 1999 07:20:41 +0600 (ESS) From: Ilia Chipitsine X-Sender: ilia@localhost.cgu.chel.su To: Darren Foo Cc: freebsd-questions@FreeBSD.ORG Subject: Re: HP Laserjet 1100 In-Reply-To: <37FBC368.C1542B03@ca.webct.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=koi8-r Content-Transfer-Encoding: 8BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG -----BEGIN PGP SIGNED MESSAGE----- PCL is no neccessity, LaserJet 1100 should understand PostScript, which if de-facto UNIX standard. does it work from any other Operating system (on the same machine) ? if not, try to play with BIOS setup settings. if yes, what does 'dmesg' say ? Regards, (îÁÉÌÕÞÛÉÅ ÐÏÖÅÌÁÎÉÑ) Ilia Chipitsine (éÌØÑ ûÉÐÉÃÉÎ) On Wed, 6 Oct 1999, Darren Foo wrote: > I can't seem to get my Laserjet 1100 to print. The first time I tried > lptest > /dev/lpt0 it just have me a single line. Not like the stairstep > example in the handbook, just one single line. I added the filter listed > in the handbook and now I get no text at all. The printer uses PCL 5e. I > saw a port for converting DVI files to PCL... what is that for? > > > > -- > Darren Foo > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -----BEGIN PGP SIGNATURE----- Version: 2.6.3ia Charset: noconv iQB1AwUBN/v1a+RxlWKN2EXhAQEWWgMAlTDREAepUqKVpE89OYqr2cYdcu+5wuwc rbH8LufSJob6ShrllJCw/2kZA94IM/3+nOptIXjqs+RR5uwWuTLm+Axz+pWCR0TT ZJfxvI5qTUs44P8kZW943MJGdhwqoPIa =QPjr -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 19:18:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from nebula.nift.net (DSL73-223.brandx.net [209.55.73.223]) by hub.freebsd.org (Postfix) with ESMTP id F3974157FC for ; Wed, 6 Oct 1999 19:17:50 -0700 (PDT) (envelope-from druid@eoe-magical.org) Received: from eoe-magical.org ([209.55.73.227]) by nebula.nift.net (8.8.5/8.8.5) with ESMTP id SAA22578 for ; Wed, 6 Oct 1999 18:48:34 -0500 (CDT) Message-ID: <37FC04C7.EEF94F36@eoe-magical.org> Date: Wed, 06 Oct 1999 19:26:15 -0700 From: Donald X-Mailer: Mozilla 4.5 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions Subject: User FTP setup Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG are there any FAQ sites with info on setting up user FTP access, not anonimous but access using user name and password. Thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 19:19:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 8309F151C6; Wed, 6 Oct 1999 19:17:55 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from beppo.feral.com (beppo [192.67.166.79]) by feral.com (8.8.7/8.8.7) with ESMTP id TAA02732; Wed, 6 Oct 1999 19:17:20 -0700 Date: Wed, 6 Oct 1999 19:17:20 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Philip Hallstrom Cc: freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Philip Hallstrom wrote: > [which dds drive to get snipped] > > > I have to say I've been disappointed by low end DATs. If you can, go to > > www.corpsys.com and get the older Archive DDS2 4 slot changer- it's only > > 500$. Otherwise, I say spend more money and get an HP DDS3 drive. > > > > I have to say that the TR4/TR5 clones that HP seems to be building seem > > pretty good. Media is expensive though. > > Are they decent drives? I didn't include them in my list due to the > number of posts in these mailing lists complaining about them. The drive > itself seems a lot cheaper. Media seems to be about $30... so if you > don't need many tapes is that a good way to go? I've found the HP T20 to be a fine unit. -matt To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 19:31: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from news.rdc1.tn.home.com (ha2.rdc1.tn.home.com [24.2.7.67]) by hub.freebsd.org (Postfix) with ESMTP id 3664C14C88 for ; Wed, 6 Oct 1999 19:31:05 -0700 (PDT) (envelope-from williamsl@home.com) Received: from RELIABLE ([24.4.115.31]) by news.rdc1.tn.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991007023039.NENI13734.news.rdc1.tn.home.com@RELIABLE> for ; Wed, 6 Oct 1999 19:30:39 -0700 Date: Wed, 6 Oct 1999 22:30:37 -0400 From: Ben Williams X-Mailer: The Bat! (v1.34a) UNREG / CD5BF9353B3B7091 X-Priority: 3 (Normal) Message-ID: <6937.991006@home.com> To: FreeBSD questions Subject: Re[2]: IMAP -> POP3 gateway? In-reply-To: References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Extremely unlikely for me to convince them to switch to IMAP would qualify for the "understatement of the year" award. I'll grab cyrus on my local machine soon and have a look. I have a basic idea for a framework in my head already but if I have to write it I'll probably have to look into the RFC's. For that matter I would probably come out easier just hacking the app I'm installing for them to use POP but that's what I'm trying to stay away from .. any other ideas? -- Ben On or about Wednesday, October 06, 1999, sometime around 5:18:04 PM, you said: ppvo> On 6-Oct-99 at 13:27, Ben Williams (williamsl@home.com) wrote: >> FreeBSD, >> >> Does anyone know how I could go about setting up an IMAP server >> (uw-imap "IMAP4rev1 v12.250" from ports) to talk to a pop3 server? The >> reason I want to do this is the company I am working for has a custom >> smtp/pop3 server which holds all of its messages internally and the >> application I am trying to put together for them already has IMAP >> support built into to, but putting the IMAP server on the system >> results in empty mailboxes because the custom smtp/pop3 is holding all >> the messages in non-standard ways and places. >> >> Any ideas and all help appreciated. ppvo> The Cyrus IMAP server comes with a POP daemon that translates the ppvo> POP requests into IMAP. That's the exact opposite of what you want; ppvo> but it still might provide a framework. (I'm assuming that it is ppvo> extremely unlikely that you could convince them to switch to a standard ppvo> IMAP server with POP access; even one like Cyrus that keeps all the ppvo> mail in a private area and forces access via IMAP/POP.) ppvo> -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 19:43:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 2C4BD14F43 for ; Wed, 6 Oct 1999 19:43:00 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id MAA88311; Thu, 7 Oct 1999 12:10:41 +0930 (CST) Date: Thu, 7 Oct 1999 12:10:41 +0930 From: Greg Lehey To: Kevin Libutsi Cc: Len Huppe , freebsd-questions@FreeBSD.ORG Subject: Re: i would like to get a book about free bsd? Message-ID: <19991007121041.C78191@freebie.lemis.com> References: <37FAFD5D.A208592C@execpc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wednesday, 6 October 1999 at 15:29:02 +0000, Kevin Libutsi wrote: > Thank you for replying me about "The complete FreeBSD" but i've tried to > find it around the net but everwhere i go it says that they do not have it > or they have to order it and its discontinued. Who told you that? I'm really interested in knowing this, because I know Amazon continue to claim it, but it's possible that others do as well. > Are you sure that wwww.freebsdmail.com will have it. Yes. > If they do thanks, and i will order it right away. Go for it. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 19:43:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from news.rdc1.tn.home.com (ha2.rdc1.tn.home.com [24.2.7.67]) by hub.freebsd.org (Postfix) with ESMTP id 9FC6414FF3 for ; Wed, 6 Oct 1999 19:43:15 -0700 (PDT) (envelope-from williamsl@home.com) Received: from RELIABLE ([24.4.115.31]) by news.rdc1.tn.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991007024203.NIGV13734.news.rdc1.tn.home.com@RELIABLE> for ; Wed, 6 Oct 1999 19:42:03 -0700 Date: Wed, 6 Oct 1999 22:42:02 -0400 From: Ben Williams X-Mailer: The Bat! (v1.34a) UNREG / CD5BF9353B3B7091 Reply-To: Ben Williams X-Priority: 3 (Normal) Message-ID: <3945.991006@home.com> To: FreeBSD questions Subject: Re[2]: IMAP -> POP3 gateway? X-Sender: Ben Williams Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG preface: I apologize if this ends up being twice-posted but I received what appears to be a message from the "local" postmaster complaining about my "reply to" address last time. Extremely unlikely for me to convince them to switch to IMAP would qualify for the "understatement of the year" award. I'll grab cyrus on my local machine soon and have a look. I have a basic idea for a framework in my head already but if I have to write it I'll probably have to look into the RFC's. For that matter I would probably come out easier just hacking the app I'm installing for them to use POP but that's what I'm trying to stay away from .. any other ideas? -- Ben On or about Wednesday, October 06, 1999, sometime around 5:18:04 PM, you said: ppvo> The Cyrus IMAP server comes with a POP daemon that translates the ppvo> POP requests into IMAP. That's the exact opposite of what you want; ppvo> but it still might provide a framework. (I'm assuming that it is ppvo> extremely unlikely that you could convince them to switch to a standard ppvo> IMAP server with POP access; even one like Cyrus that keeps all the ppvo> mail in a private area and forces access via IMAP/POP.) >> >> Does anyone know how I could go about setting up an IMAP server >> (uw-imap "IMAP4rev1 v12.250" from ports) to talk to a pop3 server? The >> reason I want to do this is the company I am working for has a custom >> smtp/pop3 server which holds all of its messages internally and the >> application I am trying to put together for them already has IMAP >> support built into to, but putting the IMAP server on the system >> results in empty mailboxes because the custom smtp/pop3 is holding all >> the messages in non-standard ways and places. >> >> Any ideas and all help appreciated. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20: 4:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id EDFBF1500E for ; Wed, 6 Oct 1999 20:04:31 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id MAA88508; Thu, 7 Oct 1999 12:33:28 +0930 (CST) Date: Thu, 7 Oct 1999 12:33:28 +0930 From: Greg Lehey To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: is this just a rumor about kernel installs? Message-ID: <19991007123328.F78191@freebie.lemis.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wednesday, 6 October 1999 at 14:54:15 +0100, J McKitrick wrote: > *Somewhere* i thought i saw someone say that the a new FreeBSD kernel can > be installed without rebooting. This isn't really possible, is it? Could > the person have meant compile, not install? No, you have to install before you reboot. There's nothing surprising about that, but you appear to think that after installation you'll automatically be running the new kernel. That's not the case: installation just moves the new kernel to /kernel and the old kernel (if it exists) to /kernel.old. You still need to reboot to run it. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:12:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dart.sr.se (dart.SR.SE [193.12.91.98]) by hub.freebsd.org (Postfix) with ESMTP id A50B415006 for ; Wed, 6 Oct 1999 20:12:43 -0700 (PDT) (envelope-from gunnar@pluto.sr.se) Received: from honken.sr.se ([134.25.128.27]) by dart.sr.se (8.9.3/8.9.3) with ESMTP id FAA10024; Thu, 7 Oct 1999 05:10:07 +0200 (MET DST) Received: from pluto.sr.se (pluto.SR.SE [134.25.193.91]) by honken.sr.se (8.7.5/8.7.3) with ESMTP id FAA29606; Thu, 7 Oct 1999 05:10:06 +0200 (MET DST) Received: (from gunnar@localhost) by pluto.sr.se (8.9.3/8.9.3) id FAA31108; Thu, 7 Oct 1999 05:10:06 +0200 (CEST) (envelope-from gunnar) Date: Thu, 7 Oct 1999 05:10:06 +0200 From: Gunnar Flygt To: Ian Diddams Cc: FreeBSD Questions Subject: Re: Reading MS Word files Message-ID: <19991007051006.B30900@sr.se> Reply-To: Gunnar Flygt References: <37FB1B9A.9528C984@freenet.uk.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37FB1B9A.9528C984@freenet.uk.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 10:51:22AM +0100, Ian Diddams wrote: > On Mon, 4 Oct 1999, Darren Foo wrote: > > > > > Are there any programs available for Windows that would serve as a > > > X-server? I want to read MS Word and Office documents but MS support > > > under unix has been lacking. > > I might be missing Darren's point here but doesn't Star Office support > MS format files ie can read Word, Excell etc files? And allegedly has > better filters than MS for such stuff? Yes, absolutely so. I've at last got rid of my NT, now that I can read both .doc and .xl* files wirh StarOffice. -- __o regards, Gunnar ---_ \<,_ email: flygt@sr.se ---- (_)/ (_) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:13:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from twwells.com (twwells.com [209.118.236.57]) by hub.freebsd.org (Postfix) with SMTP id B262315006 for ; Wed, 6 Oct 1999 20:13:34 -0700 (PDT) (envelope-from news@twwells.com) Received: from news by twwells.com with local (Exim 1.71 #2) id 11Z3uT-0003Gg-00; Wed, 6 Oct 1999 23:08:01 -0400 From: bill@twwells.com (T. William Wells) To: freebsd-questions@freebsd.org Subject: Re: Silo Overflows (AGAIN!) Message-ID: <7th2it$btj$1@twwells.com> References: <99100621590100.17968@neo-dominion> Date: Wed, 6 Oct 1999 23:08:01 -0400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In article <99100621590100.17968@neo-dominion>, ciro wrote: : Everyone in the archives says "Don't worry too much about it" except it is VERY : annoyig It is something to be annoyed at. Every one of those is at least one character lost. On your mouse that will mean erratic mouse behavior. On a PPP connection, it means packet loss and thus delays and throughput problems. And it can be *really* annoying on straight text connections. More annoying, *it isn't necessary*. Way back when I had a mere '486/33, the serial driver I wrote (for FreeBSD) was perfectly capable of handling high speed lines without character loss. Since my serial driver was written for FreeBSD 1.something, it probably won't even compile, much less run, on a modern FreeBSD. If I had the time, I'd port it but I don't...however, if someone wants to update my driver and get it included in FreeBSD, I'll be happy to donate the code and advice. : If no one knows how to fix it, does anyone have any idea as to how to supress : the messages? man syslogd man syslog.conf : Another question... Am I crazy, or is sio0 == COM1... if so, why the heck is my : MOUSE making my computer angry? sio0 == COM1. And I couldn't tell you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:30:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ra.cland.net (ra.cland.net [206.29.106.10]) by hub.freebsd.org (Postfix) with ESMTP id 29C22157AB for ; Wed, 6 Oct 1999 20:30:21 -0700 (PDT) (envelope-from ragan@cland.net) Received: from ragan (as082.cland.net [206.29.102.82]) by ra.cland.net (8.8.5/8.8.5) with SMTP id WAA25845 for ; Wed, 6 Oct 1999 22:25:49 -0500 (CDT) Message-ID: <000b01bf1073$8ceeb1c0$52661dce@ragan> From: "Paul Ragan" To: Subject: exabyte drives Date: Wed, 6 Oct 1999 22:25:03 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0008_01BF1049.A25500C0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0008_01BF1049.A25500C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable i have an old exabyte ibm 7802-011 scsi, do you know what the capacity = is? ------=_NextPart_000_0008_01BF1049.A25500C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
i have an old exabyte ibm 7802-011 = scsi, do you=20 know what the capacity is?
------=_NextPart_000_0008_01BF1049.A25500C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:33:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.island.net.au (mail.island.net.au [203.28.142.3]) by hub.freebsd.org (Postfix) with ESMTP id D7A9F14BE0 for ; Wed, 6 Oct 1999 20:33:11 -0700 (PDT) (envelope-from hugh@island.net.au) Received: from solo (solo.island.net.au [203.28.142.5]) by mail.island.net.au (8.8.5/8.8.5) with SMTP id NAA25948 for ; Thu, 7 Oct 1999 13:32:43 +1000 (EST) Message-ID: <00d501bf1074$44c25360$088ea8c0@island.net.au> From: "Hugh Blandford" To: Subject: Installation problem installing 3.x Date: Thu, 7 Oct 1999 13:30:14 +1000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all, I'm very puzzled by this. I am trying to install a machine with 3.3 using the ISO image. However, I am running into difficulties. Earlier, I tried the Walnut Creek 3.2 CDs and have not been able to continue past the same point that I get stuck in 3.3. I am setting up a very old machine. It is fine however, because I can install 2.2.8 on it with no difficulties at all using the same method that I am trying to install 3.x. I do an install from another FreeBSD box with the CD mounted under my home directory. Therefore, I am installing across the LAN using FTP. I must have the disk geometry correct because 2.2.8 goes in fine with no problems. Under 3.x the install goes fine. It does the newfs etc etc it connects to the FTP server and downloads the initial file and then as soon as it goes to extract bin/bin.aa it stops. It will then sit there forever :((( Any suggestions? It does this under both 3.2 and 3.3. Regards, Hugh Blandford To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:37:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from snipe.prod.itd.earthlink.net (snipe.prod.itd.earthlink.net [207.217.120.62]) by hub.freebsd.org (Postfix) with ESMTP id 3BD6414C45 for ; Wed, 6 Oct 1999 20:37:30 -0700 (PDT) (envelope-from imsleepy@earthlink.net) Received: from dialup-209.245.72.22.LosAngeles1.Level3.net (dialup-209.245.72.22.LosAngeles1.Level3.net [209.245.72.22]) by snipe.prod.itd.earthlink.net (8.9.3/8.9.3) with ESMTP id UAA23122 for ; Wed, 6 Oct 1999 20:37:18 -0700 (PDT) Date: Wed, 6 Oct 1999 20:37:17 -0700 (PDT) From: imsleepy X-Sender: imsleepy@muffin.fshcrkr.com To: freebsd-questions@freebsd.org Subject: connecting to computers behind a firewall Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG on my "server" computer i have freebsd running with ppp -alias -ddial, and i was wondering if there is any way to have people connect to computers on my local network from outside without having to telnet to the server, then telnet to a particular local computer. i dont mind reading up on this, im just not quite sure where to look. thanks -scott To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:44:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc.weber.edu (cc.weber.edu [137.190.1.2]) by hub.freebsd.org (Postfix) with ESMTP id BE55D14C0E for ; Wed, 6 Oct 1999 20:44:53 -0700 (PDT) (envelope-from jlewis@cc.weber.edu) Received: from offcampus.weber.edu ([137.190.3.228]) by cc.WEBER.EDU (PMDF V5.1-12 #7039) with SMTP id <01JGTV3QTGMO8Y87AC@cc.WEBER.EDU> for freebsd-questions@FreeBSD.ORG; Wed, 6 Oct 1999 21:44:51 MST Date: Wed, 06 Oct 1999 21:44:43 -0600 (Mountain Daylight Time) From: Jason Lewis Subject: Re: Can't find localhost In-reply-to: <000801bf104b$07388740$482842ab@Stanford.EDU> Cc: freebsd-questions@FreeBSD.ORG Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT X-X-Sender: jlewis9@gwmta1.weber.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Can you ping 127.0.0.1 ? Half-duplex does not have anything to do with this. Do you have a lo0 device list under ifconfig -a ? On Wed, 6 Oct 1999, Charles Cox wrote: > Hell(o) everyone, > I have just installed freebsd 3.3 on my Pentium class system. I am still using the generic kernal, although the rebuild is on its way... I have a newly supported (thanks guys) 3c905c-TX NIC. > All of the networking seems to be working fine, with the exception of one thing, and that it I cannot ping myself. I get an ARPresolve failure. I was thinking that there was a DNS problem, since I am using an external server, but that wasn't it. I checked ifconfig -a, and found that my 3c905c is working in half-duplex mode. Could this be the problem? > > Thanks in advance. > Chuck > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:47: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dart.sr.se (dart.SR.SE [193.12.91.98]) by hub.freebsd.org (Postfix) with ESMTP id 18AF314C04 for ; Wed, 6 Oct 1999 20:46:59 -0700 (PDT) (envelope-from gunnar@pluto.sr.se) Received: from honken.sr.se ([134.25.128.27]) by dart.sr.se (8.9.3/8.9.3) with ESMTP id FAA10358; Thu, 7 Oct 1999 05:45:10 +0200 (MET DST) Received: from pluto.sr.se (pluto.SR.SE [134.25.193.91]) by honken.sr.se (8.7.5/8.7.3) with ESMTP id FAA29935; Thu, 7 Oct 1999 05:45:09 +0200 (MET DST) Received: (from gunnar@localhost) by pluto.sr.se (8.9.3/8.9.3) id FAA32115; Thu, 7 Oct 1999 05:45:09 +0200 (CEST) (envelope-from gunnar) Date: Thu, 7 Oct 1999 05:45:09 +0200 From: Gunnar Flygt To: rich Cc: FreeBSD Questions Subject: Re: Trident Cyber9525DVD PCI/AGP? Message-ID: <19991007054509.E30900@sr.se> Reply-To: Gunnar Flygt References: <000801bf1020$14cc6280$07911ea3@rich> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <000801bf1020$14cc6280$07911ea3@rich> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 01:27:31AM +0800, rich wrote: > Does the FreeBSD support this VGA card now? This isn't a FreeBSD issue! FreeBSD most certainly will run with the card. You have to check with XFree86 organization to see if it runs under X. Check at http://www.xfree86.org > How can I setup my x-windows using this card? > thanks a lot! -- __o regards, Gunnar ---_ \<,_ email: flygt@sr.se ---- (_)/ (_) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:48: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from team7.cba.ualr.edu (team7.cba.ualr.edu [144.167.120.24]) by hub.freebsd.org (Postfix) with ESMTP id 79B8C14D0B for ; Wed, 6 Oct 1999 20:48:01 -0700 (PDT) (envelope-from joe@team7.cba.ualr.edu) Received: from access54.mod1.ualr.edu (access54.mod1.ualr.edu [144.167.7.54]) by team7.cba.ualr.edu (8.8.8/8.8.8) with ESMTP id WAA06497; Wed, 6 Oct 1999 22:49:21 -0500 (CDT) Date: Wed, 6 Oct 1999 22:47:11 -0500 (CDT) From: Just another Joe X-Sender: joe@njal.ualr.edu To: Charles Cox Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Can't find localhost In-Reply-To: <000801bf104b$07388740$482842ab@Stanford.EDU> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Charles Cox wrote: > Hell(o) everyone, > I have just installed freebsd 3.3 on my Pentium class system. I am > still using the generic kernal, although the rebuild is on its > way... I have a newly supported (thanks guys) 3c905c-TX NIC. > All of the networking seems to be working fine, with the exception > of one thing, and that it I cannot ping myself. I get an ARPresolve > failure. I was thinking that there was a DNS problem, since I am > using an external server, but that wasn't it. I checked ifconfig > -a, and found that my 3c905c is working in half-duplex mode. Could > this be the problem? > > Thanks in advance. > Chuck > > Have you checked "http://www.freebsd.org/releases/3.3R/errata.html"? There is a known problem with the loop-back device. -Joe To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:49:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id C3D4B14E5A for ; Wed, 6 Oct 1999 20:49:09 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 40717 invoked by uid 1001); 7 Oct 1999 03:47:51 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 7 Oct 1999 03:47:51 -0000 Date: Wed, 6 Oct 1999 23:47:50 -0400 (EDT) From: Jaime Kikpole To: freebsd-questions@freebsd.org Subject: Booting from RAID5 array? (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I tried sending this in earlier, but it didn't come back to me (from the list) yet, so I'm not sure if I made a mistake. I'm re-sending it but I appologise if this is a second copy. Jaime ---------- Forwarded message ---------- Is it possible to boot FreeBSD (3.3-Release) from a RAID-5 array? Specifically, I'm trying to get this to work on a Netfinity 5000, a DPT SmartCache IV, and 4 SCSI hot-swapable drives in the Netfinity's bays. I've unplugged the SCSI cables from the Netfinity's mother board and plugged them into the DPT card. Then I used the DPT configuration software (I had to run it from a MS-DOS boot floppy... bleh) to make a single array that contained all four disks. The FreeBSD 3.3 boot floppies recognised this array as da0, which it claimed was 26000+ MB large. Since its made from four 9.1GB drives, I thought that that number sounded right. The boot floppies claimed to install FreeBSD 3.3 off of the FTP site (although it complained that there was no distribution named "local" to install....) and everything looked OK as far as I could tell. But when I reboot, it can't find a bootable disk. As for my experience, I've never worked with SCSI before except for external devices on Macintosh computers. Its entirely possible that I did something dumb, so feel free to grasp at straws if you have any ideas for me to try! :) Also, I've never worked with RAID before. So if there's some special "blessing" that I have to do on the drive or if FreeBSD just can't boot from a RAID array, please let me know. BTW, the only suggestion (so far) that made some level of sense was to switch to Linux. Is this really going to be necessary? Between my FreeBSD experience and Linux's "patch of the hour" approach, I'd rather not do that. Thanks in advance! Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:54: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id C8BC915100 for ; Wed, 6 Oct 1999 20:53:54 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 40758 invoked by uid 1001); 7 Oct 1999 03:53:52 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 7 Oct 1999 03:53:52 -0000 Date: Wed, 6 Oct 1999 23:53:52 -0400 (EDT) From: Jaime Kikpole To: Ralph Wiggum Cc: questions@freebsd.org Subject: Re: amount of space for a FreeBSD 3.2 installation In-Reply-To: <19991006225612.56458.qmail@hotmail.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Ralph Wiggum wrote: > Ok..just got a quick question here. How much space will I need for a full > FreeBSD 3.2 install? I have the 4 CD set. That depends on what you mean by "full". The base install of FreeBSD itself is a GB or 2, I think. Maybe 2.5 GB at most. But if you install all binaries, source code, XFree86 (source and binaries), and all of the ports (without using a "cd /usr/ports ; make clean" command to get rid of the left-overs) you could be looking at 6 GB or more. This is mostly a guess. For what its worth, I've got the 3.2 source and binaries, XFree86 binaries, and a lot of ports (though no where near all of them) and my /usr partition has about 3.3GB in it. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 20:58:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id F3AE5153B2 for ; Wed, 6 Oct 1999 20:58:17 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 40772 invoked by uid 1001); 7 Oct 1999 03:57:27 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 7 Oct 1999 03:57:27 -0000 Date: Wed, 6 Oct 1999 23:57:27 -0400 (EDT) From: Jaime Kikpole To: Todd Backman Cc: Charles Cox , freebsd-questions@FreeBSD.ORG Subject: Re: Can't find localhost In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, Todd Backman wrote: > Have you removed: > > network_interfaces="lo0" > ifconfig_lo0="inet 127.0.0.1" > > from /etc/rc.conf or /etc/defaults/rc.conf? Check the errata.txt file for your version of FreeBSD. I remember reading this morning that 3.3-Release didn't have lo0 listed in the /etc/defaults/rc.conf. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 21: 0:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 349E014D19 for ; Wed, 6 Oct 1999 21:00:08 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 40797 invoked by uid 1001); 7 Oct 1999 04:00:03 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 7 Oct 1999 04:00:03 -0000 Date: Thu, 7 Oct 1999 00:00:03 -0400 (EDT) From: Jaime Kikpole To: imsleepy Cc: freebsd-questions@freebsd.org Subject: Re: connecting to computers behind a firewall In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999, imsleepy wrote: > on my "server" computer i have freebsd running with ppp -alias -ddial, and > i was wondering if there is any way to have people connect to computers on > my local network from outside without having to telnet to the server, then > telnet to a particular local computer. i dont mind reading up on this, im > just not quite sure where to look. > thanks Check out the ppp man page. I remember something in there about port forwarding. This would allow you to set up, for example, port 8888 on your dialing computer to do nothing but forward packets to an internal computer's port 23. Then someone could "telnet dialing.computer.dns 8888". Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 21:12:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from server4.reno.powernet.net (server4.reno.powernet.net [216.88.152.247]) by hub.freebsd.org (Postfix) with ESMTP id 547D315156 for ; Wed, 6 Oct 1999 21:12:26 -0700 (PDT) (envelope-from craigb@powernet.net) Received: from snowbox (p6-16.reno.powernet.net [216.88.152.116]) by server4.reno.powernet.net (8.9.0/8.8.5) with SMTP id VAA15731 for ; Wed, 6 Oct 1999 21:11:28 -0700 (PDT) Message-ID: <000901bf107a$1875efa0$749858d8@snowbox> From: "Craig C. Brunner(CCB)" To: Subject: X....Won't start Date: Wed, 6 Oct 1999 21:11:54 -0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0006_01BF103F.6A8D6A60" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0006_01BF103F.6A8D6A60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hey I installed XF86 3.3.5 Ive run xfree86config, and when i run startx i get an error: _X11TransSocketUNIXConnect: Can't connect: errno =3D 61 and it repeats that a buncha times the just quits without starting X I think it may have to do with my hostname.. but I dunno, Please help ------=_NextPart_000_0006_01BF103F.6A8D6A60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hey
I installed XF86 3.3.5
Ive run xfree86config, and when i run startx i get = an=20 error:
_X11TransSocketUNIXConnect: Can't connect: errno =3D = 61
 
and it repeats that a buncha times the just quits = without=20 starting X
I think it may have to do with my hostname.. but I = dunno,=20 Please help
------=_NextPart_000_0006_01BF103F.6A8D6A60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 21:13:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from shell.futuresouth.com (shell.futuresouth.com [198.78.58.28]) by hub.freebsd.org (Postfix) with ESMTP id 6931214A26; Wed, 6 Oct 1999 21:13:04 -0700 (PDT) (envelope-from tim@futuresouth.com) Received: (from tim@localhost) by shell.futuresouth.com (8.9.3/8.9.3) id XAA23869; Wed, 6 Oct 1999 23:10:33 -0500 (CDT) Date: Wed, 6 Oct 1999 23:10:33 -0500 From: Tim Tsai To: spork Cc: Mike Tancsa , Stuart Henderson , scsi@FreeBSD.ORG, questions@FreeBSD.ORG Subject: Re: External RAID boxes (was Re: AHC errors. Bad disk or bad firmware, or bug in driver ?) Message-ID: <19991006231032.A23636@futuresouth.com> References: <3.0.5.32.19990809164854.01c08750@staff.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Note that David Greenman recently wrote that he wasn't happy with Mylex's performance for cdrom.com and has (or is about to) moved to the CMD Viper II series. I am personally waiting for DPT V and Mylex (PCI) drivers. It's really hard to justify the price of external RAID units. Tim On Wed, Oct 06, 1999 at 11:57:56AM -0400, spork wrote: > On Mon, 9 Aug 1999, Mike Tancsa wrote: > > > What I am not clear on from glancing at the mylex site is that they seem to > > be cards only and cards with boxes ? Am I right in thinking that you > > supply the case ? From the .pdf file > > Yes, and beyond that there is a model that is simply a "card" for OEM > people putting together their own box. We've been buying the one that is > in a 5 1/4" full-height drive format. Their webpages generally suck and > are out of date. You probably want the DAC-960-SXI-H. > > > Do you save substantially 'putting it together' yourself ? > > Probably. We've been putting these inside a few machines (not an external > box) for folks who wanted a "RAID solution". It's fast, very fast. Makes > the DPT look like a real crawl. We're basically using it more for > protection than anything else, but we didn't want to end up with something > slower than straight drives off a UW controller. > > > What sort of price have people paid (in USD), and who is generally a good > > outlet to buy from ? > > I think we paid about $2450 for the SXI-H w/32MB cache. You can probably > do better elsewhere, check buy.com or Ingram (if you are or are friendly > with a reseller). > > So an example array came out like so: > > $2450 SXI-H > $1680 6*9GB IBM 34560's > > $4130 > > Add a box and you're ready to go... > > Charles > > > Thanks for any input anyone can provide on this topic. > > > > ---Mike > > ------------------------------------------------------------------------ > > Mike Tancsa, tel 01.519.651.3400 > > Network Administrator, mike@sentex.net > > Sentex Communications www.sentex.net > > Cambridge, Ontario Canada > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-scsi" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-scsi" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 21:30: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc.weber.edu (cc.weber.edu [137.190.1.2]) by hub.freebsd.org (Postfix) with ESMTP id BD41F14C0D for ; Wed, 6 Oct 1999 21:29:49 -0700 (PDT) (envelope-from jlewis@cc.weber.edu) Received: from offcampus.weber.edu ([137.190.3.227]) by cc.WEBER.EDU (PMDF V5.1-12 #7039) with SMTP id <01JGTWNQF8OW8Y87Q7@cc.WEBER.EDU> for freebsd-questions@FreeBSD.org; Wed, 6 Oct 1999 22:29:12 MST Date: Wed, 06 Oct 1999 22:29:06 -0600 (Mountain Daylight Time) From: Jason Lewis Subject: Re: Reading MS Word files In-reply-to: <19991007051006.B30900@sr.se> Cc: FreeBSD Questions Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT X-X-Sender: jlewis9@gwmta1.weber.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG How about corel 8? On Thu, 7 Oct 1999, Gunnar Flygt wrote: > On Wed, Oct 06, 1999 at 10:51:22AM +0100, Ian Diddams wrote: > > On Mon, 4 Oct 1999, Darren Foo wrote: > > > > > > > Are there any programs available for Windows that would serve as a > > > > X-server? I want to read MS Word and Office documents but MS support > > > > under unix has been lacking. > > > > I might be missing Darren's point here but doesn't Star Office support > > MS format files ie can read Word, Excell etc files? And allegedly has > > better filters than MS for such stuff? > > Yes, absolutely so. I've at last got rid of my NT, now that I can read > both .doc and .xl* files wirh StarOffice. > > -- > __o > regards, Gunnar ---_ \<,_ > email: flygt@sr.se ---- (_)/ (_) > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 22:23:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from infowest.com (ns1.infowest.com [204.17.177.10]) by hub.freebsd.org (Postfix) with ESMTP id 79AC214C23 for ; Wed, 6 Oct 1999 22:23:54 -0700 (PDT) (envelope-from root@infowest.com) Received: by infowest.com (Postfix, from userid 0) id 57D6D20FB8; Wed, 6 Oct 1999 23:23:49 -0600 (MDT) To: questions@freebsd.org Subject: ppp across ssh (vpn) Reply-To: From: "Aaron D. Gifford" Message-Id: <19991007052349.57D6D20FB8@infowest.com> Date: Wed, 6 Oct 1999 23:23:49 -0600 (MDT) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I was playing around trying to establish a VPN connection by using userland ppp across SSH. I believe I have everything set up the way the ppp.conf.sample and man page described. It almost works. I can watch the log files on both sides of the tunnel. The client works as expected. However, on the server side, I keep getting "tun0: Phase: Exception detected on descriptor 0" and looking at the PPP code, it would seem that ssh is for some reason sending out-of-band data (since the select() man page explains that the only reason for an exception on a file descriptor is for OOB data). Looking at my ppp.startvpn.sh script: #!/bin/sh exec ssh -a -c blowfish -e none -l sshvpnuser -q -x vpn.server.host /usr/sbin/ppp -direct vpnserver When I add a "-t" to force ssh to allocate a pty and run the script by hand from the command line, sure enough, I see: # ./ppp.startvpn.sh ~ÿ}#À!}!}!} $}(}"}'}"}"}&} } } } }!}$}%Ü}%}&&á›ß}$}(À%} } BUT when I do NOT allocate a pty OR I run the script via PPP on my client machine, nothing happens and I see the exception previously mentioned on the server side. I am assuming that there is some terminal-related traffic, perhaps, that SSH is doing with OOB data that's causing the exception, but is maybe handled when there's a pty allocated? Please, I'm grasping at straws here, playing with stuff I know nothing about. Any ideas? Suggestions? Thanks! Aaron out. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 22:33:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.rdc1.wa.home.com (ha1.rdc1.wa.home.com [24.0.2.66]) by hub.freebsd.org (Postfix) with ESMTP id E77E514C23 for ; Wed, 6 Oct 1999 22:33:36 -0700 (PDT) (envelope-from francis.j.bruening@bigfoot.com) Received: from c583119a ([24.0.55.28]) by mail.rdc1.wa.home.com (InterMail v4.01.01.00 201-229-111) with SMTP id <19991007053115.EDHX14188.mail.rdc1.wa.home.com@c583119a> for ; Wed, 6 Oct 1999 22:31:15 -0700 From: "Francis J. Bruening" To: "freebsd" Subject: question after rebuild of kernel: config of non-existent devices Date: Wed, 6 Oct 1999 22:32:43 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I just did my first "make world" & kernel rebuild. Everything seems to be working well, but I'm curious about some boot msgs. dmesg shows ... real memory = 128M... config> di zp0 no such device ep0 invalid command.. type ? for help config> di ze0 ... ... this continues on for many devices. Strangely enough (or not so strangely) they seem to be the devices I commented out of the GENERIC kernel... so my question is what do I need to change to stop this behavior? I reread the handbook (although i admit to bloodshot eyes)what am I missing? thanks in advance Regards, Francis Bruening To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 22:33:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.seitoku.co.jp (ns.seitoku.co.jp [210.224.128.23]) by hub.freebsd.org (Postfix) with ESMTP id 80DCB14ED5; Wed, 6 Oct 1999 22:33:50 -0700 (PDT) (envelope-from ecom-e-admin@us.coconet.ne.jp) Received: from ns.us.coconet.ne.jp (localhost.seitoku.co.jp [127.0.0.1] (may be forged)) by ns.seitoku.co.jp (8.9.3+3.2W/3.7W/991005) with ESMTP id OAA21782; Thu, 7 Oct 1999 14:26:52 +0900 (JST) Date: Thu, 07 Oct 1999 14:37:46 +0900 From: QuickEcom Reply-To: ecom-e@us.coconet.ne.jp Subject: Open your Japanese Branch To: ecom-e@us.coconet.ne.jp Message-Id: <37FC31AA.112E5BC3@coconet.ne.jp> X-ML-Name: ecom-e X-Mail-Count: 00053 X-MLServer: fml [fml 2.2B#13](fml commands only mode); post only (only members can post) X-ML-Info: If you have a question, send e-mail with the body "help" (without quotes) to the address ecom-e-ctl@us.coconet.ne.jp; help= X-Mailer: Mozilla 4.61 [en] (Win95; I) X-Accept-Language: en Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Why limit your market. E-commerce in Japan is rising at a staggering rate, but over 95% of Japanese still only look at Japanese sites. And when it comes to paying by credit card on the Internet using English software...forget it. Though the will to buy is there, they can`t find you. American Merchants who want to get in to this market can now use Quickcart (J) The consumer side will be in Japanese and your end will be in English. Your homepage will also be translated into Japanese, and we will promote your site in all the Japanese Search engines. Only then will you have a fair chance to compete in this rapidly expanding market. http://www2.coconet.ne.jp/quickecom/quickcart_e.html quickecom@coconet.ne.jp To add/remove your name from our mailing list please go to the URL (Mailing List link) above. You will recieve Japan Ecommerce news. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 22:37:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rmx09.globecomm.net (rmx09.iname.net [165.251.8.95]) by hub.freebsd.org (Postfix) with ESMTP id 4E4F514C06 for ; Wed, 6 Oct 1999 22:37:49 -0700 (PDT) (envelope-from strben@altavista.net) Received: from weba2.iname.net by rmx09.globecomm.net (8.9.1/8.8.0) with ESMTP id BAA13330 From: strben@altavista.net Received: (from root@localhost) by weba2.iname.net (8.9.1a/8.9.2.Alpha2) id BAA03186; Thu, 7 Oct 1999 01:35:21 -0400 (EDT) MIME-Version: 1.0 Message-Id: <99100701352132.00018@weba2.iname.net> Content-Type: Multipart/Mixed; boundary="Boundary-=_ZOpxoAGxJUBykIUzjVBtklGUEEwv" Date: Thu, 7 Oct 1999 01:35:21 -0400 (EDT) To: freebsd-questions@FreeBSD.ORG, fug-washdc@Sytex.Net Subject: Please help a Newbie get Sound functioning Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --Boundary-=_ZOpxoAGxJUBykIUzjVBtklGUEEwv Content-Type: Text/Plain Content-Transfer-Encoding: 7bit Content-Description: text, unencoded Hello, I am having problems getting sound to work on this PC. Please reply to me directly because I am NOT a member of this "questions@FreeBSD.org" mailing list. I do read the "Stable" list. Thanks in advance for your time! Ben Hacker, Jr. -=*=- -=*=- -=*=- -=*=- Ben Hacker, Jr ~ strben@altavista.net -=*=- ---------------------------------------------------------------- Get your free email from AltaVista at http://altavista.iname.com --Boundary-=_ZOpxoAGxJUBykIUzjVBtklGUEEwv Content-Type: text/plain Content-Transfer-Encoding: 7bit Content-Description: text, unencoded Content-Disposition: inline; filename=sndinfo.txt My configuration is based upon: http://www.dvl-software.com/freebsd/sound.htm Below I am providing info from: - uname -a - cat /dev/sndstat - dmesg - pnpinfo For the error about "pcm0" in dmesg output... pcm0 is defined in my kernel config. When I tried to change it to pcm1, dmesg said pcm2 was configured correctly and pcm1 now had the error that was pcm0. The device number just jumped up by one. I therefor put it back to the original settings. -=*=- -=*=- -=*=- -=*=- -=*=- $ uname -a FreeBSD bhacker1.isp.com 3.3-STABLE FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 i386 -=*=- -=*=- -=*=- -=*=- -=*=- $ cat /dev/sndstat FreeBSD Audio Driver (981002) Oct 1 1999 07:05:48 Installed devices: pcm1: at 0x220 irq 5 dma 1:5 sequencer1: at 0x388 (not functional) -=*=- -=*=- -=*=- -=*=- -=*=- $ dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #4: Fri Oct 1 07:08:15 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3 real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x38 8 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d 041] pcm1 (SB16pnp sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a syncing disks... 10 9 4 done Rebooting... Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3 real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x38 8 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d 041] pcm1 (SB16pnp sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a -=*=- -=*=- -=*=- -=*=- -=*=- $ su root -c "pnpinfo" Password: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL0028 (0x28008c0e), Serial Number 0x001e17b3 PnP Version 1.0, Vendor Version 16 Device Description: Creative SB16 PnP Logical Device ID: CTL0031 0x31008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 11 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL2011 0x11208c0e #1 Compatible Device ID: PNP0600 (0006d041) Device Description: IDE TAG Start DF Good Configuration IRQ: 10 - only one type (true/edge) I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 11 - only one type (true/edge) I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 10 11 12 15 - only one type (true/edge) I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 15 - only one type (true/edge) I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1 [16-bit addr] TAG End DF Logical Device ID: PNPffff 0xffffd041 #2 Device Description: Reserved I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1 [16-bit addr] Logical Device ID: CTL7001 0x01708c0e #3 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 [16-bit addr] End Tag Successfully got 72 resources, 4 logical fdevs -- card select # 0x0001 CSN CTL0028 (0x28008c0e), Serial Number 0x001e17b3 Logical device #0 IO: 0x0220 0x0000 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 Logical device #2 IO: 0x0620 0x0a20 0x0e20 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 $ --Boundary-=_ZOpxoAGxJUBykIUzjVBtklGUEEwv-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Wed Oct 6 23:33: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web601.yahoomail.com (web1101.mail.yahoo.com [128.11.23.121]) by hub.freebsd.org (Postfix) with SMTP id EFB4E14DC3 for ; Wed, 6 Oct 1999 23:33:04 -0700 (PDT) (envelope-from thehobbit55@yahoo.com) Message-ID: <19991007063844.15548.rocketmail@web601.yahoomail.com> Received: from [202.164.105.169] by web1101.mail.yahoo.com; Wed, 06 Oct 1999 23:38:44 PDT Date: Wed, 6 Oct 1999 23:38:44 -0700 (PDT) From: raghav aras Subject: looking for freeBSD information To: freebsd-questions@FreeBSD.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Gentlemen: I would be much obliged if you could provide me with detailed information regarding: Process management in freeBSD. Thank you. ===== __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 0:44:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from acc0.visti.net (acc0.visti.net [195.64.225.233]) by hub.freebsd.org (Postfix) with ESMTP id 00DDD14C1C for ; Thu, 7 Oct 1999 00:44:21 -0700 (PDT) (envelope-from karp@visti.net) Received: from lab.visti.net (lab.visti.net [195.64.225.242]) by acc0.visti.net (8.8.8-Elvisti-980428/8.8.8) with ESMTP id KAA05375; Thu, 7 Oct 1999 10:44:20 +0300 (EEST) Received: from localhost (karp@localhost) by lab.visti.net (8.9.3/8.9.3) with ESMTP id KAA43644; Thu, 7 Oct 1999 10:44:19 +0300 (EEST) X-Authentication-Warning: lab.visti.net: karp owned process doing -bs Date: Thu, 7 Oct 1999 10:44:18 +0300 (EEST) From: Alexander Karptsov To: Vladimir Kushnir Cc: freebsd-questions@FreeBSD.ORG Subject: Re: XKB settings for Russian keyboard wuth XFree86 3.3.5? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Vladimir Kushnir wrote: > Hello, > Does anybody set these with 3.3.5 (I mean, _not_ through Xmodmap)? If so, > would you please post them? For some reason, my old 3.3.3.1 settings > (and those in Handbook) doesn't work anymore, particularly - CapsLock > doesn't switch groups. Has something changed there? apply it to /usr/X11R6/lib/X11/xkb/keymap/xfree86: ---cut---- *** xfree86.orig Thu Oct 7 10:23:31 1999 --- xfree86 Thu Oct 7 10:23:39 1999 *************** *** 123,129 **** xkb_keycodes { include "xfree86" }; xkb_types { include "default" }; xkb_compatibility { include "default" }; ! xkb_symbols { include "en_US(pc105)+ru" }; xkb_geometry { include "pc(pc102)" }; }; xkb_keymap "se_FI" { --- 123,129 ---- xkb_keycodes { include "xfree86" }; xkb_types { include "default" }; xkb_compatibility { include "default" }; ! xkb_symbols { include "en_US(pc105)+ru+group(caps_toggle)" }; xkb_geometry { include "pc(pc102)" }; }; xkb_keymap "se_FI" { ---cut--- and add XkbKeymap "xfree86(ru)" to "Keyboard" section of your /etc/XF86Config > > Thanks in advance, > Vladimir > > ===========================|======================= > Vladimir Kushnir | > kushn@mail.kar.net, | Powered by FreeBSD > kushnir@ap3.bitp.kiev.ua | > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 0:48:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from snoopy.pacific.net.sg (snoopy.pacific.net.sg [203.120.90.116]) by hub.freebsd.org (Postfix) with ESMTP id A11BF14C1C for ; Thu, 7 Oct 1999 00:48:33 -0700 (PDT) (envelope-from jk.tan@pacific.net.sg) Received: from pop2.pacific.net.sg (pop2.pacific.net.sg [203.120.90.86]) by snoopy.pacific.net.sg with ESMTP id PAA22603 for ; Thu, 7 Oct 1999 15:46:31 +0800 (SGT) Received: from firefox.pacific.net.sg (firefox.pacific.net.sg [203.120.89.74]) by pop2.pacific.net.sg with ESMTP id PAA22185 for ; Thu, 7 Oct 1999 15:46:31 +0800 (SGT) Date: Thu, 7 Oct 1999 15:45:10 +0800 (SGT) From: Tan Juay Kwang X-Sender: tanjk@firefox.pacific.net.sg To: freebsd-questions@freebsd.org Subject: crypt(3) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have a freebsd 3.2 system and is having some problem with the crypt(3) function. According to the man page, if I were to supply a 2 byte salt, it will return the historical 13 byte string. However, it seems like the one in 3.2 is not doing what is said in the man pages? Sample code and output :- printf("%s\n",crypt("a","_1234abcd")); printf("%s\n", crypt("a","ab")); Output: $1$_1234abc$zyNh.miJty685SsEEDPDT0 $1$ab$NM4FR4Dl/CzoTSJTd3YJ3. Or is my way of using crypt(3) wrong in some way? Thanks and regards, Juay Kwang To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 1:17:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from oskar.nanoteq.co.za (oskar.nanoteq.co.za [196.37.91.10]) by hub.freebsd.org (Postfix) with ESMTP id E61EF14D14 for ; Thu, 7 Oct 1999 01:16:57 -0700 (PDT) (envelope-from rbezuide@oskar.nanoteq.co.za) Received: (from rbezuide@localhost) by oskar.nanoteq.co.za (8.9.0/8.9.0) id KAA26531 for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 10:18:40 +0200 (SAT) From: Reinier Bezuidenhout Message-Id: <199910070818.KAA26531@oskar.nanoteq.co.za> Subject: Package creation frontend To: freebsd-questions@freebsd.org Date: Thu, 7 Oct 1999 10:18:39 +0200 (SAT) X-Mailer: ELM [version 2.4ME+ PL28 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi .. Is there a frontend available for pkg_creat ?? thanks Reinier To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 1:27:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from moon.mteege.de (ppps-nb03.MVnet.de [194.25.108.153]) by hub.freebsd.org (Postfix) with ESMTP id DF4BC14E17 for ; Thu, 7 Oct 1999 01:27:03 -0700 (PDT) (envelope-from matthias@mteege.de) Received: (from matthias@localhost) by moon.mteege.de (8.8.8/8.8.8) id IAA18607; Thu, 7 Oct 1999 08:03:23 +0200 (MET DST) (envelope-from matthias) Date: Thu, 7 Oct 1999 08:03:23 +0200 From: Matthias Teege To: Ben Williams Cc: FreeBSD questions Subject: Re: IMAP -> POP3 gateway? Message-ID: <19991007080323.A18534@moon.mteege.de> References: <3945.991006@home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <3945.991006@home.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 10:42:02PM -0400, Ben Williams wrote: > preface: I apologize if this ends up being twice-posted but I received > what appears to be a message from the "local" postmaster complaining > about my "reply to" address last time. > > Extremely unlikely for me to convince them to switch to IMAP would > qualify for the "understatement of the year" award. I'll grab cyrus on > my local machine soon and have a look. I have a basic idea for a > framework in my head already but if I have to write it I'll probably > have to look into the RFC's. For that matter I would probably come out > easier just hacking the app I'm installing for them to use POP but > that's what I'm trying to stay away from .. any other ideas? Moin, I think like Pat -- the best way is change to cyrus. It works great with POP and IMAP. Another posibility is to fetch the mail from the POP Server (fetchmail) and forward it to the IMAP Server or duplicate the incomming mail with procmail and forward it to the POP and the IMAP one. But this will produce a lot of traffic and redundant files. Matthias > > -- > Ben > > On or about Wednesday, October 06, 1999, sometime around 5:18:04 PM, you said: > ppvo> The Cyrus IMAP server comes with a POP daemon that translates the > ppvo> POP requests into IMAP. That's the exact opposite of what you want; > ppvo> but it still might provide a framework. (I'm assuming that it is > ppvo> extremely unlikely that you could convince them to switch to a standard > ppvo> IMAP server with POP access; even one like Cyrus that keeps all the > ppvo> mail in a private area and forces access via IMAP/POP.) > >> > >> Does anyone know how I could go about setting up an IMAP server > >> (uw-imap "IMAP4rev1 v12.250" from ports) to talk to a pop3 server? The > >> reason I want to do this is the company I am working for has a custom > >> smtp/pop3 server which holds all of its messages internally and the > >> application I am trying to put together for them already has IMAP > >> support built into to, but putting the IMAP server on the system > >> results in empty mailboxes because the custom smtp/pop3 is holding all > >> the messages in non-standard ways and places. > >> > >> Any ideas and all help appreciated. > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- Matthias Teege -- matthias@mteege.de -- http://emugs.de make world not war PGP-Key auf Anfrage To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 1:30:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.aktrad.ru (ns1.aktrad.ru [195.218.140.4]) by hub.freebsd.org (Postfix) with ESMTP id 6651714E2D for ; Thu, 7 Oct 1999 01:30:33 -0700 (PDT) (envelope-from hook@aktrad.ru) Received: from sloth (sloth.aktrad.ru [195.218.140.13]) by ns1.aktrad.ru (8.9.3/8.9.3) with SMTP id MAA09971 for ; Thu, 7 Oct 1999 12:29:06 +0400 (MSD) Message-ID: <0c1a01bf109e$08b57490$0d8cdac3@aktrad.ru> From: "Gene Sokolov" To: Subject: problems with xntpd on fbsd 3.3 Date: Thu, 7 Oct 1999 12:29:02 +0400 MIME-Version: 1.0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG We recently upgraded our old 2.2.8 server to 3.3 stable and changed the old ntpd to xntpd which comes with 3.3. Since then we were unable to sync time. The xntpd stays in stratum 16, no matter what we do inferno# ntptrace exch ns1.aktrad.ru: stratum 16, offset -4.302678, synch distance 6.90456 0.0.0.0: *Timeout* the old server works just fine: inferno# ntptrace test test.aktrad.ru: stratum 2, offset 0.165126, synch distance 0.54787 haven.umd.edu: stratum 1, offset -0.112727, synch distance 0.00577, refid 'WWVB' We switched back to ntpd, by installing it from ports and copying the old config file. It did not help. Can anyone give me any pointer to where the problem might be? Thanks. here is our ntp.conf file: ***begin*** server rackety.udel.edu server umd1.umd.edu server lilben.tn.cornell.edu driftfile /etc/ntp.drift restrict default ***end*** Please send a copy of your replies to hook@aktrad.ru, I am not subscribed to questions. Gene Sokolov. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 2:17:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pasha.anand.org (pasha.anand.org [199.103.176.41]) by hub.freebsd.org (Postfix) with SMTP id 3BD14150EC for ; Thu, 7 Oct 1999 02:17:02 -0700 (PDT) (envelope-from arb@anand.org) Received: (qmail 4431 invoked by uid 1001); 7 Oct 1999 09:16:45 -0000 Date: Thu, 7 Oct 1999 12:16:45 +0300 From: Anand Buddhdev To: Tan Juay Kwang Cc: freebsd-questions@freebsd.org Subject: Re: crypt(3) Message-ID: <19991007121645.A4381@africaonline.co.ke> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organisation: Africa Online Ltd, P O Box 63017, Nairobi, Kenya X-Phone: +254-2-243775 X-WWW-Homepage: http://www.anand.org X-Duties: SysAdmin, Hostmaster, Postmaster, Programmer, Support Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 03:45:10PM +0800, Tan Juay Kwang wrote: You seem to have MD5 encryption installed instead of DES. If you look at your libcrypt.a, you'll see it is a link to libscrypt.a. Use sysinstall to install the DES library from a non-US mirror of FreeBSd, or from CDROM, if you have that. Then your libcrypt.a will be a link to libdescrypt.a, and you'll get DES encrypted passwords. > Hi, I have a freebsd 3.2 system and is having some problem with the > crypt(3) function. According to the man page, if I were to supply a 2 byte > salt, it will return the historical 13 byte string. However, it seems like > the one in 3.2 is not doing what is said in the man pages? > > Sample code and output :- > > printf("%s\n",crypt("a","_1234abcd")); > printf("%s\n", crypt("a","ab")); > > Output: > $1$_1234abc$zyNh.miJty685SsEEDPDT0 > $1$ab$NM4FR4Dl/CzoTSJTd3YJ3. > > Or is my way of using crypt(3) wrong in some way? > > Thanks and regards, > Juay Kwang > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- See complete headers for more info To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 2:55:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id 45D4414A10 for ; Thu, 7 Oct 1999 02:55:41 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id WAA02992; Wed, 6 Oct 1999 22:44:58 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37FC092A.41F530CE@big-blue.net> Date: Wed, 06 Oct 1999 22:44:58 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Ilia Chipitsine Cc: Darren Foo , freebsd-questions@FreeBSD.ORG Subject: Re: HP Laserjet 1100 References: Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ilia Chipitsine wrote: > -----BEGIN PGP SIGNED MESSAGE----- > > PCL is no neccessity, LaserJet 1100 should understand PostScript, > which if de-facto UNIX standard. > > does it work from any other Operating system (on the same machine) ? > > if not, try to play with BIOS setup settings. > if yes, what does 'dmesg' say ? > > Regards, (îÁÉÌÕÞÛÉÅ ÐÏÖÅÌÁÎÉÑ) > > Ilia Chipitsine (éÌØÑ ûÉÐÉÃÉÎ) > > On Wed, 6 Oct 1999, Darren Foo wrote: > > > I can't seem to get my Laserjet 1100 to print. The first time I tried > > lptest > /dev/lpt0 it just have me a single line. Not like the stairstep > > example in the handbook, just one single line. I added the filter listed > > in the handbook and now I get no text at all. The printer uses PCL 5e. I > > saw a port for converting DVI files to PCL... what is that for? > > > > > > > > -- > > Darren Foo > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > -----BEGIN PGP SIGNATURE----- > Version: 2.6.3ia > Charset: noconv > > iQB1AwUBN/v1a+RxlWKN2EXhAQEWWgMAlTDREAepUqKVpE89OYqr2cYdcu+5wuwc > rbH8LufSJob6ShrllJCw/2kZA94IM/3+nOptIXjqs+RR5uwWuTLm+Axz+pWCR0TT > ZJfxvI5qTUs44P8kZW943MJGdhwqoPIa > =QPjr > -----END PGP SIGNATURE----- > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message better check this url http://www.freebsd.org/~andreas/ i have 1100 and works great after this ;-) alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 3:34:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from poseidon.hamsterville.ultranet.com (poseidon.hamsterville.ultranet.com [146.115.71.116]) by hub.freebsd.org (Postfix) with ESMTP id D7D8A14C25 for ; Thu, 7 Oct 1999 03:34:31 -0700 (PDT) (envelope-from ben@hamsterville.ultranet.com) Received: from ENERGIZER (energizer.hamsterville.ultranet.com [146.115.71.106]) by poseidon.hamsterville.ultranet.com (8.9.3/8.9.0/1.0-bcg) with SMTP id GAA09322 for ; Thu, 7 Oct 1999 06:35:54 -0400 (EDT) Message-ID: <011101bf10af$d061e120$6a477392@dsg.hamsterville.ultranet.com> From: "Ben Goodwin" To: Subject: Fw: router/firewall woes Date: Thu, 7 Oct 1999 06:36:28 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.5600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.5600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'd posted the following w/out being subscribed, so I'm not sure it even made it.. I'm subscribed now, however :-) Anyway I did answer the following.. I thought this info might be useful for someone else/the archives. Simply, I upgraded the machine itself (got myself a nice new p2-400; way overkill but whatever), re-installed the intel's, and it works beautifully. I guess that old machine was just too old to work right for some reason.. It'd be nice to know exactly why - FreeBSD issue or an issue with that mobo/bios? I dunno .. -=| Ben ----- Original Message ----- From: To: Cc: Sent: Friday, October 01, 1999 7:53 PM Subject: router/firewall woes > I have a P100 here that I'm trying to do the following with > > ISDN > | > FreeBSD > | | > workstations servers > > That's 3 ethernet cards. When I first built it, all I had was an NE2000 pci > and 2 3x509B's ... And I experienced the wonderful suckiness of the 3com's, > and decided to just get 3 intel pro 100's .. So that's what I did.. I > installed them, yadda yadda, things ping and seem to work. Then I notice > some REALLY crappy performance .. long story but I played around for HOURS > and noticed that about the only thing I could do was > sysctl -w net.inet.ip.fastforwarding=1 > > that improved my ftp transfers to be where they should be. But I was > still experiencing telnet choppiness/total cut-out, and my SMB/windows > traffic from the workstation lan to the server lan sucked so much that I > couldn't even copy files ... ping floods worked fine, but FTP's would > sometimes HANG, telnet's would hang, .. blech! I gave up and > reverted to the 3com's and the ne2000 with a script that runs > an ifconfig up every second to get around the buggy 3com stuff, but > I'm wondering, what's up with not being able to use the intel's? I'd like > to have better performance than the 3coms, and not suck down 50% > cpu in interrupts while transferring files across the lan .. > help! :-) > > notes: > IPFW is compiled in, but to help rule out a rule problem I > set the firewall_type to 'open' > pentium 100, 32 meg ram, 2GB IDE > 3.3-R > custom kernel (I can send the config if someone wants it) > > TIA, > > -=| Ben > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 3:34:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 276A814C25 for ; Thu, 7 Oct 1999 03:34:39 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZAsE-000B1G-00; Thu, 07 Oct 1999 12:34:10 +0200 From: Sheldon Hearn To: chris@tourneyland.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3-Release - problem with PATH? In-reply-to: Your message of "Wed, 06 Oct 1999 11:14:41 EST." <3.0.6.32.19991006111441.00872620@mail.9netave.net> Date: Thu, 07 Oct 1999 12:34:10 +0200 Message-ID: <42361.939292450@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 11:14:41 EST, chris@tourneyland.com wrote: > >> I just wonder why ``make install'' doesn't run rehash as the last > >> thing it does The real answer to the question is: Because rehashing will only solve the problem for the session in which the ``make install'' was executed. It's a hardly useful solution. Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 3:45:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rmx07.globecomm.net (rmx07.iname.net [165.251.8.75]) by hub.freebsd.org (Postfix) with ESMTP id 9A54A14DA9 for ; Thu, 7 Oct 1999 03:45:07 -0700 (PDT) (envelope-from strben@altavista.net) Received: from weba4.iname.net by rmx07.globecomm.net (8.9.1/8.8.0) with ESMTP id GAA13565 From: strben@altavista.net Received: (from root@localhost) by weba4.iname.net (8.9.1a/8.9.2.Alpha2) id GAA28175; Thu, 7 Oct 1999 06:42:03 -0400 (EDT) MIME-Version: 1.0 Message-Id: <991007064202DW.11067@weba4.iname.net> Date: Thu, 7 Oct 1999 06:42:02 -0400 (EDT) Content-Type: Text/Plain Content-Transfer-Encoding: 7bit To: DC-FreeBSD Users Group , Subject: Please help with a sound problem Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I am having problems getting sound to work on this PC. Sorry my first message data was not readable... Please reply to me directly because I am NOT a member of this "questions@FreeBSD.org"; mailing list. I do read the "Stable" list. Thanks in advance for your time! Ben Hacker, Jr. My configuration is based upon: http://www.dvl-software.com/freebsd/sound.htm Below I am providing info from: - uname -a - cat /dev/sndstat - dmesg - pnpinfo For the error about "pcm0" in dmesg output... pcm0 is defined in my kernel config. When I tried to change it to pcm1, dmesg said pcm2 was configured correctly and pcm1 now had the error that was pcm0. The device number just jumped up by one. I therefore put it back to the original settings. -=*=- -=*=- -=*=- -=*=- -=*=- $ uname -a FreeBSD bhacker1.isp.com 3.3-STABLE FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 i386 -=*=- -=*=- -=*=- -=*=- -=*=- $ cat /dev/sndstat FreeBSD Audio Driver (981002) Oct 1 1999 07:05:48 Installed devices: pcm1: at 0x220 irq 5 dma 1:5 sequencer1: at 0x388 (not functional) -=*=- -=*=- -=*=- -=*=- -=*=- $ dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #4: Fri Oct 1 07:08:15 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3 real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x38 8 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d 041] pcm1 (SB16pnp sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a syncing disks... 10 9 4 done Rebooting... Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3 real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d 041] pcm1 (SB16pnp sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a -=*=- -=*=- -=*=- -=*=- -=*=- $ su root -c "pnpinfo" Password: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL0028 (0x28008c0e), Serial Number 0x001e17b3 PnP Version 1.0, Vendor Version 16 Device Description: Creative SB16 PnP Logical Device ID: CTL0031 0x31008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 11 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL2011 0x11208c0e #1 Compatible Device ID: PNP0600 (0006d041) Device Description: IDE TAG Start DF Good Configuration IRQ: 10 - only one type (true/edge) I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 11 - only one type (true/edge) I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 10 11 12 15 - only one type (true/edge) I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 15 - only one type (true/edge) I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1 [16-bit addr] TAG End DF Logical Device ID: PNPffff 0xffffd041 #2 Device Description: Reserved I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1 [16-bit addr] Logical Device ID: CTL7001 0x01708c0e #3 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 [16-bit addr] End Tag Successfully got 72 resources, 4 logical fdevs -- card select # 0x0001 CSN CTL0028 (0x28008c0e), Serial Number 0x001e17b3 Logical device #0 IO: 0x0220 0x0000 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 Logical device #2 IO: 0x0620 0x0a20 0x0e20 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 $ -=*=- -=*=- -=*=- -=*=- Ben Hacker, Jr ~ strben@altavista.net -=*=- ---------------------------------------------------------------- Get your free email from AltaVista at http://altavista.iname.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 4:13: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 7F9F91518E for ; Thu, 7 Oct 1999 04:12:52 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZBRx-000BAN-00; Thu, 07 Oct 1999 13:11:05 +0200 From: Sheldon Hearn To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Netscape 4.7 In-reply-to: Your message of "Thu, 07 Oct 1999 02:33:07 +0100." Date: Thu, 07 Oct 1999 13:11:05 +0200 Message-ID: <42926.939294665@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 02:33:07 +0100, J McKitrick wrote: > Does it make sense to get the Linux version? I've heard it may run better > or have more plugins. Or is the native FBSD good enough? The advantage of the Linux version is that some plugins may work. There aren't many (any?) plugins for the FreeBSD binary. As to reliability, ignore everything everyone tells you. Try them both for yourself. :-) Later, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 4:19:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id E841214E14 for ; Thu, 7 Oct 1999 04:19:21 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZBZl-000BBR-00; Thu, 07 Oct 1999 13:19:09 +0200 From: Sheldon Hearn To: raghav aras Cc: freebsd-questions@FreeBSD.ORG Subject: Re: looking for freeBSD information In-reply-to: Your message of "Wed, 06 Oct 1999 23:38:44 MST." <19991007063844.15548.rocketmail@web601.yahoomail.com> Date: Thu, 07 Oct 1999 13:19:08 +0200 Message-ID: <42992.939295148@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999 23:38:44 MST, raghav aras wrote: > I would be much obliged if you could provide me with > detailed information regarding: > Process management in freeBSD. This subject is incredibly well documented in section 2.4 of the book: The Design and Implementation of the 4.4BSD Operating System by Marshall Kirk McKusick (Editor), Keith Bostic, Michael J. Karels (Editor) Addison-Wesley Pub Co ISBN: 0201549794 You can get it from Amazon for about $55. Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 4:36:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id D73C5150D8 for ; Thu, 7 Oct 1999 04:35:47 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11ZBpm-0002lJ-00; Thu, 7 Oct 1999 12:35:42 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id MAA43724 for ; Thu, 7 Oct 1999 12:35:42 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Thu, 7 Oct 1999 12:35:41 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: how do i get modem connection speed from ppp? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Which of the stats used with the 'show' command will let me see the speed of the current ppp connection? -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 4:46: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.SAIOS.COM (mail.SAIOS.COM [216.25.35.16]) by hub.freebsd.org (Postfix) with ESMTP id E156715127 for ; Thu, 7 Oct 1999 04:45:25 -0700 (PDT) (envelope-from cbri@saios.com) Received: from saios.com [206.48.227.73] by mail.SAIOS.COM with ESMTP (SMTPD32-5.05) id A7CF30101BA; Thu, 07 Oct 1999 07:45:19 -0400 Message-ID: <37FC88A6.C49F119F@saios.com> Date: Thu, 07 Oct 1999 13:48:54 +0200 From: Cyril Brion X-Mailer: Mozilla 4.07 [en] (WinNT; I) MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: network netmask mystery Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG why do i have to configure the netmask with 255.255.255.255: my network is on 255.255.255.0 ? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 4:49:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from horizon2.webcentral.com.au (horizon2.webcentral.com.au [202.139.235.196]) by hub.freebsd.org (Postfix) with SMTP id 0EDE214EE9 for ; Thu, 7 Oct 1999 04:49:32 -0700 (PDT) (envelope-from wyldephyre@telebot.net) Received: (qmail 1198 invoked from network); 7 Oct 1999 11:49:27 -0000 Received: from unknown (HELO timberwolf) (203.147.197.230) by horizon2.webcentral.com.au with SMTP; 7 Oct 1999 11:49:27 -0000 Message-ID: <009001bf10bb$fba84160$e6c593cb@timberwolf> Reply-To: "Haikal Saadh" From: "Haikal Saadh" To: "Colin Campbell" Cc: References: Subject: Re: freebsd v bsdi v linux Date: Thu, 7 Oct 1999 22:03:34 +1000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG ----- Original Message ----- From: Colin Campbell To: Sent: Wednesday, October 06, 1999 8:38 AM Subject: freebsd v bsdi v linux > Hi, > > Had an interesting installtion problem that has just been solved. > > Machine is a PIII 450 with 512MB (4x128)RAM. During installation of 3.2 > from the WC CD I'd get a wite failure or a panic of the machine or both. > With 3.3 using NFS I just got a machine panic. These always happened > during the bin dist unpacking. > > I tried RedHat 6.0 and the system panicked half way through the > installation. > > The machine came with BSDI 3.1 on it. When I booted it for the first time > I noticed that the system was reporting only 128MB RAM. Just BSDI > weirdness I thought. Despite the repeated FreeBSD and Linux failures I was > always able to install BSDI, but the system always reported 128MB RAM. > Nothing dawned on me from this. > > Anyway, I started pulling DIMMs from the box. With only slot 1 occupied > FreeBSD installed no problems. I pulled that DIMM and put two others in. > No problems. Added the first one to give 384MB, no problems. Put the > untested DIMM in and the machine wouldn't even boot! Hmm bad memory! > > To test a theory I then installed BSDI 3.1 again. Interestingly it now > reported 384MB RAM. This now leads me to my question: > > What is BSDI doing that made it recognise the bad memory in slot 2, and > hence only work with the first 128MB, that Linux and more importantly > FreeBSD are NOT doing? Anyone think it's a useful enough feature to be > added to the system? It measn that if you think you have xMB and the OS > comes up with yMB you might have a problem. Personally, I'm all for it, as I am (was?) having ther same problem..I've got a scavenged p200MMX with 64Megs of RAM that I was hoping to deploy as a proxy/firwall for my home network (2 clients), unfortunately, FreeBSD (3.2) reports panic:GPFs , tries to sync disks, gives up, and reboots. All red hat did was go :Aiee! [something about stopping the interrupt handler] and hang. I was really looking forward to setting that box up, but I'm gonna have to wait till the RAM prices go down again. (AUD400 for 64 megs????) Sorry if that was a rant... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 4:58:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from saul.netgates.co.uk (saul.netgates.co.uk [194.105.64.199]) by hub.freebsd.org (Postfix) with ESMTP id 883C414F99 for ; Thu, 7 Oct 1999 04:58:02 -0700 (PDT) (envelope-from didds@freenet.uk.com) Received: from freenet.uk.com (localhost [127.0.0.1]) by saul.netgates.co.uk (8.9.3/8.9.3) with ESMTP id MAA06788 for ; Thu, 7 Oct 1999 12:57:59 +0100 (BST) (envelope-from didds@freenet.uk.com) Message-ID: <37FC8AC6.7D93C7E6@freenet.uk.com> Date: Thu, 07 Oct 1999 12:57:58 +0100 From: Ian Diddams X-Mailer: Mozilla 4.51 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Subject: mrt Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Anybody have any comments about running MRT (probably version 1.6) on FreeBSD 3.2 ? Has anybody made it work? BGP? -- Didds To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 5:11:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 1637F14F99 for ; Thu, 7 Oct 1999 05:11:11 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZCMr-000BHq-00; Thu, 07 Oct 1999 14:09:53 +0200 From: Sheldon Hearn To: Cyril Brion Cc: freebsd-questions@FreeBSD.ORG Subject: Re: network netmask mystery In-reply-to: Your message of "Thu, 07 Oct 1999 13:48:54 +0200." <37FC88A6.C49F119F@saios.com> Date: Thu, 07 Oct 1999 14:09:53 +0200 Message-ID: <43389.939298193@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 13:48:54 +0200, Cyril Brion wrote: > why do i have to configure the netmask with 255.255.255.255: my network > is on 255.255.255.0 ? You don't -- that was bad advice or a typo. :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 5:23: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sabre.dhs.org (rocky.ee.cua.edu [136.242.140.6]) by hub.freebsd.org (Postfix) with ESMTP id AA3C814E5B for ; Thu, 7 Oct 1999 05:23:06 -0700 (PDT) (envelope-from sabre@sabre.dhs.org) Received: from localhost (sabre@localhost) by sabre.dhs.org (8.9.3/8.9.3) with ESMTP id GAA05651; Thu, 7 Oct 1999 06:39:48 GMT (envelope-from sabre@sabre.dhs.org) Date: Thu, 7 Oct 1999 06:39:48 +0000 (GMT) From: Sabre To: Quill235@aol.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Free... In-Reply-To: <0.c1cabe60.252d1750@aol.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Yes, it's totally free, hence the name ;) All software and such (for the most part) is too. Checkout http://www.freebsd.org/ports Sabre To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 5:30: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sabre.dhs.org (rocky.ee.cua.edu [136.242.140.6]) by hub.freebsd.org (Postfix) with ESMTP id 7945D15173 for ; Thu, 7 Oct 1999 05:29:51 -0700 (PDT) (envelope-from sabre@sabre.dhs.org) Received: from localhost (sabre@localhost) by sabre.dhs.org (8.9.3/8.9.3) with ESMTP id GAA05669 for ; Thu, 7 Oct 1999 06:44:39 GMT (envelope-from sabre@sabre.dhs.org) Date: Thu, 7 Oct 1999 06:44:39 +0000 (GMT) From: Sabre To: "freebsd-questions@freebsd.org" Subject: Re: mrt In-Reply-To: <37FC8AC6.7D93C7E6@freenet.uk.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I presume you mean MRTG (Multi Route Traffic Grapher) and yes, I have it installed on my FBSD system to monitor it and a couple of other interfaces. Check out http://www.sabre.dhs.org/stats if you want to see it in action :) Sabre P.S. If you need help with it, just let me know! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 5:36:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from embelia.wanadoo.fr (smtp-rt-7.wanadoo.fr [193.252.19.161]) by hub.freebsd.org (Postfix) with ESMTP id 9C1A814CAB for ; Thu, 7 Oct 1999 05:36:04 -0700 (PDT) (envelope-from emm.r@wanadoo.fr) Received: from amyris.wanadoo.fr (193.252.19.150) by embelia.wanadoo.fr; 7 Oct 1999 14:35:10 +0200 Received: from jethro.labrador.fr (164.138.188.142) by amyris.wanadoo.fr; 7 Oct 1999 14:32:55 +0200 From: E.Romeo Reply-To: emm.r@wanadoo.fr To: freebsd-questions@freebsd.org Subject: E-MAIL is not delivered Date: Thu, 7 Oct 1999 14:12:28 +0200 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100714342601.00656@jethro.labrador.fr> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG My machine is not configured as a server, because above all I need a client machine. I am connected to an ISP by modem, and all the KDE internet software work (that is: KMAIL, KRN, KFM, etc ...). Besides I use fetchmail to download my incoming mail and ppp to connect to my ISP. I must add that I created /etc/resolv.conf like this: nameserver xxx.xxx.xxx.xxx. nameserver yyy.yyy.yyy.yyy. where x... and y... are the primary and secondary dns addresses of my ISP. And it works. Moreover I didn't set up the network interfaces with /stand/sysinstall and I didn't perform any manual network configuration with ifconfig. Since the graphical internet programs work, I didn't believe that useful. Now here is my problem: I'd like to use Mutt or Mail to send E-mail to remote addresses. But, if I am not mistaken, those programs (or more precisely sendmail) need the SMTP host name of my ISP (smtp.wanadoo.fr), which is an information I gave to programs like KMAIL. Could someone tell me how I can do to supply this information? Of course I tried to send E-mail all the same, with Mutt. But some ISP server refuse my messages, and the MAILER-DAEMON mail me (jethro.labrador.fr is my host name): -------------------------------------------------------------------------- From MAILER-DAEMON Tue Oct 5 14:34:26 1999 Return-Path: Received: from localhost (localhost) by jethro.labrador.fr (8.9.3/8.9.3) with internal id OAA00468; Tue, 5 Oct 1999 14:34:26 +0200 (CEST) (envelope-from MAILER-DAEMON) Date: Tue, 5 Oct 1999 14:34:26 +0200 (CEST) From: Mail Delivery Subsystem Message-Id: <199910051234.OAA00468@jethro.labrador.fr> To: root MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="OAA00468.939126866/jethro.labrador.fr" Subject: Returned mail: Data format error Auto-Submitted: auto-generated (failure) Status: RO Content-Length: 1560 Lines: 50 The original message was received at Tue, 5 Oct 1999 14:34:24 +0200 (CEST) from root@localhost ----- The following addresses had permanent fatal errors ----- eliane@worldonline.fr ----- Transcript of session follows ----- ... while talking to mailhost.worldonline.fr.: >>> MAIL From: SIZE=276 <<< 501 ... Sender domain must exist 501 eliane@worldonline.fr... Data format error Reporting-MTA: dns; jethro.labrador.fr Arrival-Date: Tue, 5 Oct 1999 14:34:24 +0200 (CEST) Final-Recipient: RFC822; eliane@worldonline.fr Action: failed Status: 5.5.2 Remote-MTA: DNS; mailhost.worldonline.fr Diagnostic-Code: SMTP; 501 ... Sender domain must exist Last-Attempt-Date: Tue, 5 Oct 1999 14:34:26 +0200 (CEST) Return-Path: Received: (from root@localhost) by jethro.labrador.fr (8.9.3/8.9.3) id OAA00466 for eliane@worldonline.fr; Tue, 5 Oct 1999 14:34:24 +0200 (CEST) (envelope-from root) Date: Tue, 5 Oct 1999 14:34:23 +0200 From: "emmanuel" To: eliane@worldonline.fr Subject: essai 453 Message-ID: <19991005143423.A446@jethro.labrador.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i --------------------------------------------------------------------------- Manifestly I'd better to put wanadoo.fr (the domain of my ISP) in place of labrador.fr in my message but I don't know how to do. Besides is it necessary, if somenone tell me how to furnish the good SMTP host name? Thank you very much for helping me. Emmanuel (a newbie very very puzzled) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6: 7: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from post.comm.eng.osaka-u.ac.jp (post.comm.eng.osaka-u.ac.jp [133.1.144.81]) by hub.freebsd.org (Postfix) with ESMTP id 7AB1614F8D for ; Thu, 7 Oct 1999 06:04:34 -0700 (PDT) (envelope-from hejun@post.comm.eng.osaka-u.ac.jp) Received: from cell (cell [133.1.144.110]) by post.comm.eng.osaka-u.ac.jp (8.9.1a/3.7W) with SMTP id WAA04554; Thu, 7 Oct 1999 22:05:07 +0900 (JST) Message-ID: <007401bf10c3$18656ab0$6e900185@cell.comm.eng.osaka-u.ac.jp> From: "He Jun" To: Cc: Subject: Question about CPU timeslice used in modern UNIX including BSD,LINUX Date: Thu, 7 Oct 1999 21:54:30 +0900 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0070_01BF110E.8826ED10" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0070_01BF110E.8826ED10 Content-Type: text/plain; charset="iso-2022-jp" Content-Transfer-Encoding: 7bit Hello. My name is He Jun. I am a graduate student majoring in Communications in Japan. I work on a project on load balancing in large-scale distributed systems. For the purpose of research, I want to know how long is the CPU time slice(or quantum)usually being set to in most modern UNIX systems nowadays. I went to the Web site of freebad.org ,looking through several documents of open source code, but failed to find out what I need ultimately. So I turned to you for help. If you know the answer or where the answer is likely to be found,please be kind to email me.Thanks a lot. Best regards He Jun ------=_NextPart_000_0070_01BF110E.8826ED10 Content-Type: text/html; charset="iso-2022-jp" Content-Transfer-Encoding: quoted-printable
Hello.
My name is He Jun. I am a graduate student majoring = in=20 Communications in Japan. I work on a project on load balancing in = large-scale=20 distributed systems. For the purpose of research, I want to know how = long is the=20 CPU time slice(or quantum)usually being set to in most modern UNIX = systems=20 nowadays. I went to the Web site of  freebad.org ,looking through = several documents of open source code, but failed to find out = what I need=20 ultimately. So I turned to you for help. If you know the answer or where = the=20 answer is likely to be found,please be kind to email me.Thanks a=20 lot.
 
Best regards
He Jun
------=_NextPart_000_0070_01BF110E.8826ED10-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6:34:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from europe.std.com (europe-e.std.com [192.74.137.10]) by hub.freebsd.org (Postfix) with ESMTP id 895EB14D1B for ; Thu, 7 Oct 1999 06:34:19 -0700 (PDT) (envelope-from lowell@world.std.com) Received: from world.std.com (lowell@world-f.std.com [199.172.62.5]) by europe.std.com (8.9.3/8.9.3) with ESMTP id JAA15929; Thu, 7 Oct 1999 09:33:02 -0400 (EDT) Received: (from lowell@localhost) by world.std.com (8.9.3/8.9.3) id JAA12195; Thu, 7 Oct 1999 09:32:58 -0400 (EDT) To: freebsd-questions@freebsd.org, Jaime Kikpole , tool_sucks@hotmail.com Subject: Re: amount of space for a FreeBSD 3.2 installation References: From: Lowell Gilbert Date: 07 Oct 1999 09:32:58 -0400 In-Reply-To: Jaime Kikpole's message of Wed, 6 Oct 1999 23:53:52 -0400 (EDT) Message-ID: Lines: 28 X-Mailer: Gnus v5.5/Emacs 20.2 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jaime Kikpole writes: > On Wed, 6 Oct 1999, Ralph Wiggum wrote: > > Ok..just got a quick question here. How much space will I need for a full > > FreeBSD 3.2 install? I have the 4 CD set. > > That depends on what you mean by "full". The base install of > FreeBSD itself is a GB or 2, I think. Maybe 2.5 GB at most. But if you > install all binaries, source code, XFree86 (source and binaries), and all > of the ports (without using a "cd /usr/ports ; make clean" command to get > rid of the left-overs) you could be looking at 6 GB or more. This is > mostly a guess. For what its worth, I've got the 3.2 source and binaries, > XFree86 binaries, and a lot of ports (though no where near all of them) > and my /usr partition has about 3.3GB in it. That's *much* bigger than needed. A really minimal installation is oh, 30 or 40 megabytes. I'm sitting at a (3-Stable) FreeBSD machine with X (although the sources are packed away in the tarballs in the ports area), the ports system and 100 megabytes or so of distfiles, full system source and even all the object files from a system build, as well as 60 or 70 megabytes of my actual work, and it still only takes a gigabyte or so. Obviously, getting it from there to 3 gigabytes isn't all *that* hard, but for a basically single-user machine, Jaime Kikpole's numbers are quite a bit higher than a new user would "need." Be well. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6:34:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from xena.gsicomp.on.ca (gsi.enoreo.on.ca [209.82.52.145]) by hub.freebsd.org (Postfix) with ESMTP id 1C35A14D1B for ; Thu, 7 Oct 1999 06:34:24 -0700 (PDT) (envelope-from matt@xena.gsicomp.on.ca) Received: from localhost (matt@localhost) by xena.gsicomp.on.ca (8.9.2/8.9.2) with SMTP id JAA31755 for ; Thu, 7 Oct 1999 09:37:08 -0400 (EDT) (envelope-from matt@xena.gsicomp.on.ca) Date: Thu, 7 Oct 1999 09:37:08 -0400 (EDT) From: Matthew Emmerton To: freebsd-questions@freebsd.org Subject: Problems Upgrading 2.2.7 to 3.3 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Last night I tried to upgrade my 2.2.7 machine to the newly-released 3.3. When I installed, I get "no boot.conf found", and then "invalid format!" whenever I try and boot one of the kernel[.GENERIC] images. I had the same problem when trying to do an upgrade to 3.2 a while back. I chose to revert back to 2.2.7. However, the situation has now changed and I can't run an a.out development box anymore. I installed 3.[23] via the CD-ROMS and floppies (created from CD-ROM), so according to the messages in the mailing list archives, I shouldn't run into this error, as the bootblocks from the floppies can boot ELF kernels properly. Is it possible that the boot loader / boot sector from my 2.2.7 install is not being overwritten properly, and then upon reboot, it can't figure out how to load an ELF kernel? Please phone, fax, or e-mail. I don't have newsgroup access. -- Matthew Emmerton || matt@gsicomp.on.ca GSI Computer Services || P: +1 (800) 217-5409 Technical Director || F: +1 (519) 335-6584 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6:40:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id 4797C14F8D for ; Thu, 7 Oct 1999 06:40:31 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id JAA09009; Thu, 7 Oct 1999 09:39:35 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Thu, 7 Oct 1999 09:39:35 -0400 (EDT) From: Brett Taylor To: Jaime Kikpole Cc: Ralph Wiggum , questions@FreeBSD.ORG Subject: Re: amount of space for a FreeBSD 3.2 installation In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Wed, 6 Oct 1999, Jaime Kikpole wrote: > On Wed, 6 Oct 1999, Ralph Wiggum wrote: Ok..just got a quick > > question here. How much space will I need for a full FreeBSD 3.2 > > install? I have the 4 CD set. > That depends on what you mean by "full". The base install of > FreeBSD itself is a GB or 2, I think. Maybe 2.5 GB at most. But if > you install all binaries, source code, XFree86 (source and binaries), > and all of the ports (without using a "cd /usr/ports ; make clean" > command to get rid of the left-overs) you could be looking at 6 GB or > more. These numbers are complete and utter bunk. If you're going to take the time to answer questions then at least attempt to answer them correctly. The minimal install (no source for kernel or system) and only binaries is less than 100MB. It even says so here: http://www.freebsd.org/availability.html If you get the full source tree then that needs approximate 200 MB in addition to the minimal install. If you add X (and you only add the servers you need) and grab the libraries and docs then you need probably (and this number I don't recall very well) maybe another 200 MB (possibly more). The ports tree itself takes up about 90MB of space. Adding ports/packages that you need will take up more space and the total amount of space you need depends of course on what you install. If you _really_ want a minimal install you can do it on ONE floppy w/ picoBSD. Brett ***************************************************** Dr. Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * Dept. of Mathematics and Statistics * Walker 234 (540) 831-5410 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6:44: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id D75EF14F8D for ; Thu, 7 Oct 1999 06:43:57 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id JAA09023; Thu, 7 Oct 1999 09:43:02 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Thu, 7 Oct 1999 09:43:02 -0400 (EDT) From: Brett Taylor To: william woods Cc: freebsd-questions@FreeBSD.ORG Subject: Re: system monitor apps... In-Reply-To: <99100617411900.00393@freebsd.cybcon.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Wed, 6 Oct 1999, william woods wrote: > I have a "headless box" here on my lan and I am looking for a way to > monitor the cpu, memory and swap useage on it from aneother networked > system. Any ideas for me on this? Run top on the headless machine in a terminal window/xterm on your machine? You could also run any of the X-based apps for this on that machine if it had X on it (since it's headless it probably doesn't). Maybe a statically linked one could then be displayed on your desktop though. Brett ***************************************************** Dr. Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * Dept. of Mathematics and Statistics * Walker 234 (540) 831-5410 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6:48:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id 9973C14D1B; Thu, 7 Oct 1999 06:48:15 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id JAA09037; Thu, 7 Oct 1999 09:46:25 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Thu, 7 Oct 1999 09:46:25 -0400 (EDT) From: Brett Taylor To: Reinier Bezuidenhout Cc: freebsd-questions@FreeBSD.ORG, jkh@FreeBSD.ORG Subject: Re: Package creation frontend In-Reply-To: <199910070818.KAA26531@oskar.nanoteq.co.za> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Thu, 7 Oct 1999, Reinier Bezuidenhout wrote: > Is there a frontend available for pkg_creat ?? There was actually - when the "Desktop Contest" was on, they posted a GUI frontend to pkg_create. I don't recall who did the work, but maybe Jordan recalls and knows if it's still available somewhere (I've cc'd him). Brett ***************************************************** Dr. Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * Dept. of Mathematics and Statistics * Walker 234 (540) 831-5410 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 6:54:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id 1B5E815099 for ; Thu, 7 Oct 1999 06:54:38 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id JAA09068; Thu, 7 Oct 1999 09:53:05 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Thu, 7 Oct 1999 09:53:05 -0400 (EDT) From: Brett Taylor To: Sheldon Hearn Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: Netscape 4.7 In-Reply-To: <42926.939294665@axl.noc.iafrica.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Thu, 7 Oct 1999, Sheldon Hearn wrote: > On Thu, 07 Oct 1999 02:33:07 +0100, J McKitrick wrote: > > > Does it make sense to get the Linux version? I've heard it may run > > better or have more plugins. Or is the native FBSD good enough? > > The advantage of the Linux version is that some plugins may work. > There aren't many (any?) plugins for the FreeBSD binary. There are a flew plugins for FreeBSD in the ports tree (flash just got committed and tclplugin is in there) and there's also the plugger port which acts as a plugin and pipes stuff through to external apps. Example: you have a quicktime movie plugin on some site - plugger goes and pipes the movie through to xanim (or a number of other possibilities). I've had moderate success with this - it won't help w/ Flash or using Real plugins, but you can use the flash plugin in ports now and have the Real stuff work as an external app, instead of a plugin and that works. Brett ***************************************************** Dr. Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * Dept. of Mathematics and Statistics * Walker 234 (540) 831-5410 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 7: 5:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc.weber.edu (cc.weber.edu [137.190.1.2]) by hub.freebsd.org (Postfix) with ESMTP id 9AD7415156 for ; Thu, 7 Oct 1999 07:05:11 -0700 (PDT) (envelope-from jlewis@cc.weber.edu) Received: from WS10058574.weber.edu ([137.190.162.109]) by cc.WEBER.EDU (PMDF V5.1-12 #7039) with SMTP id <01JGUGPN6G5S8Y8A0V@cc.WEBER.EDU> for freebsd-questions@FreeBSD.ORG; Thu, 7 Oct 1999 08:03:22 MST Date: Thu, 07 Oct 1999 08:05:12 -0600 (Mountain Daylight Time) From: Jason Lewis Subject: Re: again... In-reply-to: <199910062146.OAA03364@implode.root.com> Cc: freebsd-questions@FreeBSD.ORG Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT X-X-Sender: jlewis9@gwmta3.weber.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Pre-Compiled: no, source code and scripting: yes . >Sorry to bother you AGAIN but I forgot one more question...can you use any >UNIX Programs on FreeBSD? (e.g. perl) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 7: 7:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from peloton.runet.edu (peloton.runet.edu [137.45.96.205]) by hub.freebsd.org (Postfix) with ESMTP id 2DF1515190 for ; Thu, 7 Oct 1999 07:07:35 -0700 (PDT) (envelope-from brett@peloton.runet.edu) Received: from localhost (brett@localhost) by peloton.runet.edu (8.9.3/8.9.3) with ESMTP id KAA09101; Thu, 7 Oct 1999 10:06:01 -0400 (EDT) (envelope-from brett@peloton.runet.edu) Date: Thu, 7 Oct 1999 10:06:01 -0400 (EDT) From: Brett Taylor To: Ion Mihai Tetcu Cc: questions@FreeBSD.ORG Subject: Re: FreeBSD-Server, Win98-Client In-Reply-To: <199910062313.TAA06589@peloton.runet.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, On Thu, 7 Oct 1999, Ion Mihai Tetcu wrote: > In 5 Oct 99, la 13:31, Brett Taylor a scris: > > In terms of other HTML editors there are a number out there - you > > can try asWedit (in ports - www/aswedit), ashe (also in ports), > > Coffee (not in the ports at present) and lots of others. Of course > > vi always works. :-) > Thanks for the info`s. What do you prefer? I use asWedit fairly frequently - it's got nice color context coding and it works pretty well. I've tried Coffee and it's okay as well, although it doesn't have color context coding and doesn't seem set up as well out of the box (it may have color coding, but I haven't figured out how to turn it on yet). If you already use Emacs, it has an HTML mode as well. > Is it worthing to wait for the 4.0 (for the network) or should i start > installing the 3.3 ? I'd install 3.3 - 4.0 won't be out for awhile yet and 3.3 is plenty stable. Brett ***************************************************** Dr. Brett Taylor brett@peloton.runet.edu * Dept of Chem and Physics * Curie 39A (540) 831-6147 * Dept. of Mathematics and Statistics * Walker 234 (540) 831-5410 * ***************************************************** To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 7:26:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from retribution.net (retribution.net [207.96.1.17]) by hub.freebsd.org (Postfix) with ESMTP id E8A1114D51 for ; Thu, 7 Oct 1999 07:26:36 -0700 (PDT) (envelope-from mjoseff@retribution.net) Received: from retribution.net (retribution.net [207.96.1.17]) by retribution.net (8.9.3/8.9.1) with ESMTP id KAA91934 for ; Thu, 7 Oct 1999 10:28:44 -0500 (EST) Date: Thu, 7 Oct 1999 10:28:43 -0500 (EST) From: Matthew Joseff To: freebsd-questions@FreeBSD.ORG Subject: Wierd Directory listing Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG in /usr/src : -rw-r--r-- 1 root wheel 1456 Aug 14 00:28 webalizer.gif drwxr-xr-x 2 root wheel 512 Jun 10 13:48 xc -rwsr-sr-t 1 root wheel 0 Dec 31 1969 ??t?'.?x?? |7m?$??1????p???F?N????i?\D?K??; Thu, 7 Oct 1999 08:02:01 -0700 (PDT) (envelope-from culverk@wam.umd.edu) Received: from rac5.wam.umd.edu (root@rac5.wam.umd.edu [128.8.10.145]) by po4.wam.umd.edu (8.9.3/8.9.3) with ESMTP id LAA11383; Thu, 7 Oct 1999 11:02:04 -0400 (EDT) Received: from rac5.wam.umd.edu (sendmail@localhost [127.0.0.1]) by rac5.wam.umd.edu (8.9.3/8.9.3) with SMTP id LAA25064; Thu, 7 Oct 1999 11:01:57 -0400 (EDT) Received: from localhost (culverk@localhost) by rac5.wam.umd.edu (8.9.3/8.9.3) with ESMTP id LAA25034; Thu, 7 Oct 1999 11:01:56 -0400 (EDT) X-Authentication-Warning: rac5.wam.umd.edu: culverk owned process doing -bs Date: Thu, 7 Oct 1999 11:01:55 -0400 (EDT) From: Kenneth Wayne Culver To: Jason Lewis Cc: freebsd-questions@FreeBSD.ORG Subject: Re: again... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Actually that's not quite correct, most of the ports for FreeBSD are also precompiled as packages. ================================================================= | Kenneth Culver | FreeBSD: The best OS around. | | Unix Systems Administrator | ICQ #: 24767726 | | and student at The | AIM: AgRSkaterq | | The University of Maryland, | Website: (Under Construction) | | College Park. | http://www.wam.umd.edu/~culverk/| ================================================================= On Thu, 7 Oct 1999, Jason Lewis wrote: > Pre-Compiled: no, source code and scripting: yes . > > >Sorry to bother you AGAIN but I forgot one more question...can you use any > >UNIX Programs on FreeBSD? (e.g. perl) > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 8:25:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rmx07.globecomm.net (rmx07.iname.net [165.251.8.75]) by hub.freebsd.org (Postfix) with ESMTP id 6D8C11512A for ; Thu, 7 Oct 1999 08:25:18 -0700 (PDT) (envelope-from strben@altavista.net) Received: from weba6.iname.net by rmx07.globecomm.net (8.9.1/8.8.0) with ESMTP id LAA09719 From: strben@altavista.net Received: (from root@localhost) by weba6.iname.net (8.9.1a/8.9.2.Alpha2) id LAA18834; Thu, 7 Oct 1999 11:23:12 -0400 (EDT) MIME-Version: 1.0 Message-Id: <9910071123127C.11983@weba6.iname.net> Date: Thu, 7 Oct 1999 11:23:12 -0400 (EDT) Content-Type: Text/Plain Content-Transfer-Encoding: 7bit To: fug-washdc@Sytex.Net, freebsd-questions@FreeBSD.ORG Subject: Please help with a sound problem Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I am having problems getting sound to work on this PC. Sorry my first and second message data was not readable... Is this one OK. Please reply to me directly because I am NOT a member of this "questions@FreeBSD.org"; mailing list. I do read the "Stable" list. Thanks in advance for your time! Ben Hacker, Jr. My configuration is based upon: http://www.dvl-software.com/freebsd/sound.htm Below I am providing info from: - uname -a - cat /dev/sndstat - dmesg - pnpinfo For the error about "pcm0" in dmesg output... pcm0 is defined in my kernel config. When I tried to change it to pcm1, dmesg said pcm2 was configured correctly and pcm1 now had the error that was pcm0. The device number just jumped up by one. I therefore put it back to the original settings. -=*=- -=*=- -=*=- -=*=- -=*=- $ uname -a FreeBSD bhacker1.isp.com 3.3-STABLE FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 i386 -=*=- -=*=- -=*=- -=*=- -=*=- $ cat /dev/sndstat FreeBSD Audio Driver (981002) Oct 1 1999 07:05:48 Installed devices: pcm1: at 0x220 irq 5 dma 1:5 sequencer1: at 0x388 (not functional) -=*=- -=*=- -=*=- -=*=- -=*=- $ dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #4: Fri Oct 1 07:08:15 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3 real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d041] pcm1 (SB16pnp sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a syncing disks... 10 9 4 done Rebooting... Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #5: Tue Oct 5 22:52:37 EDT 1999 strben@bhacker1.isp.com:/usr/src/sys/compile/STRBEN2 Timecounter "i8254" frequency 1193182 Hz CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping = 5 Features=0x3 real memory = 25165824 (24576K bytes) config> di lnc0 config> di le0 config> di ie0 config> di fe0 config> di ex0 config> di ep0 config> di ed0 config> di cs0 config> di bt0 config> di aha0 config> di adv0 config> pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 config> pnp 1 1 os disable config> pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 config> pnp 1 3 os disable config> q avail memory = 21659648 (21152K bytes) Preloaded elf kernel "kernel" at 0xc02f4000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f409c. Probing for PnP devices: CSN 1 Vendor ID: CTL0028 [0x28008c0e] Serial 0x001e17b3 Comp ID: PNP0600 [0x0006d041] pcm1 (SB16pnp sn 0x001e17b3) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 not found sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 pcm0 not probed due to I/O address conflict with pcm1 at 0x220 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 516MB (1057280 sectors), 1120 cyls, 16 heads, 59 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 1039MB (2128896 sectors), 2112 cyls, 16 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, intr, dma, iordis acd0: drive speed 2066KB/sec, 256KB cache acd0: supported read types: CD-DA acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to wd0s2a -=*=- -=*=- -=*=- -=*=- -=*=- $ su root -c "pnpinfo" Password: Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CTL0028 (0x28008c0e), Serial Number 0x001e17b3 PnP Version 1.0, Vendor Version 16 Device Description: Creative SB16 PnP Logical Device ID: CTL0031 0x31008c0e #0 Device Description: Audio TAG Start DF Good Configuration IRQ: 5 - only one type (true/edge) DMA: channel(s) 1 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 [16-bit addr] I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode DMA: channel(s) 5 6 7 16-bit, not a bus master, , count by word, Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 5 7 10 11 - only one type (true/edge) DMA: channel(s) 0 1 3 8-bit, not a bus master, count by byte, , Compatibility mode I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 [16-bit addr] TAG End DF Logical Device ID: CTL2011 0x11208c0e #1 Compatible Device ID: PNP0600 (0006d041) Device Description: IDE TAG Start DF Good Configuration IRQ: 10 - only one type (true/edge) I/O Range 0x168 .. 0x168, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x36e .. 0x36e, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 11 - only one type (true/edge) I/O Range 0x1e8 .. 0x1e8, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x3ee .. 0x3ee, alignment 0x1, len 0x2 [16-bit addr] TAG Start DF Acceptable Configuration IRQ: 10 11 12 15 - only one type (true/edge) I/O Range 0x100 .. 0x1f8, alignment 0x8, len 0x8 [16-bit addr] I/O Range 0x300 .. 0x3fe, alignment 0x2, len 0x2 [16-bit addr] TAG Start DF Sub-optimal Configuration IRQ: 15 - only one type (true/edge) I/O Range 0x170 .. 0x170, alignment 0x1, len 0x8 [16-bit addr] I/O Range 0x376 .. 0x376, alignment 0x1, len 0x1 [16-bit addr] TAG End DF Logical Device ID: PNPffff 0xffffd041 #2 Device Description: Reserved I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1 [16-bit addr] Logical Device ID: CTL7001 0x01708c0e #3 Compatible Device ID: PNPb02f (2fb0d041) Device Description: Game I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 [16-bit addr] End Tag Successfully got 72 resources, 4 logical fdevs -- card select # 0x0001 CSN CTL0028 (0x28008c0e), Serial Number 0x001e17b3 Logical device #0 IO: 0x0220 0x0000 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 Logical device #2 IO: 0x0620 0x0a20 0x0e20 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #3 IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x00 $ -=*=- -=*=- -=*=- -=*=- Ben Hacker, Jr ~ strben@altavista.net -=*=- ---------------------------------------------------------------- Get your free email from AltaVista at http://altavista.iname.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 8:36:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from e2.ny.us.ibm.com (e2.ny.us.ibm.com [32.97.182.102]) by hub.freebsd.org (Postfix) with ESMTP id 9E5581522E for ; Thu, 7 Oct 1999 08:36:12 -0700 (PDT) (envelope-from ravikm@us.ibm.com) Received: from southrelay02.raleigh.ibm.com (southrelay02.raleigh.ibm.com [9.37.3.209]) by e2.ny.us.ibm.com (8.9.3/8.9.3) with ESMTP id LAA18286 for ; Thu, 7 Oct 1999 11:35:30 -0400 From: ravikm@us.ibm.com Received: from d54mta07.raleigh.ibm.com (d54mta07.raleigh.ibm.com [9.67.228.39]) by southrelay02.raleigh.ibm.com (8.8.8m2/NCO v2.05) with SMTP id LAA59700 for ; Thu, 7 Oct 1999 11:35:54 -0400 Received: by d54mta07.raleigh.ibm.com(Lotus SMTP MTA v4.6.5 (863.2 5-20-1999)) id 85256803.0055B116 ; Thu, 7 Oct 1999 11:35:58 -0400 X-Lotus-FromDomain: IBMUS To: FreeBSD-questions@FreeBSD.org Message-ID: <85256803.0055ADBB.00@d54mta07.raleigh.ibm.com> Date: Thu, 7 Oct 1999 10:34:16 -0500 Subject: Loadable drivers in FreeBSD and NetBSD Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi! We are trying to see if we can convert the drivers in our NetBSD implementation into loadable drivers so that we can reduce the size of the kernel. I know that in Linux, we can achieve this by adding the entry and exit points - init_module() and cleanup_module(), and adding the MODULE flag to the compiles for the driver code. Then we should be able to add and remove them dynamically using the commands "insmod" and "rmmod". How does it work on the NetBSD and FreeBSD. Do we need to add the same routines in the drivers and compile them with the MODULE flag? Also, would the kernel then not have these drivers statically linked? Is the dynamic loadability feature supported in the NetBSD 1.4/1.5 kernels? Can these drivers be hot-loaded at runtime, or do they need to be explicitly loaded using some commands such as "insmod" or so. Your help is very much appreciated. Thanks. Ravi Mandava To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 8:48:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc.weber.edu (cc.weber.edu [137.190.1.2]) by hub.freebsd.org (Postfix) with ESMTP id 5A3CC14EDF for ; Thu, 7 Oct 1999 08:48:19 -0700 (PDT) (envelope-from jlewis@cc.weber.edu) Received: from WS10058574.weber.edu ([137.190.162.109]) by cc.WEBER.EDU (PMDF V5.1-12 #7039) with SMTP id <01JGUK8MHV288Y7J4E@cc.WEBER.EDU> for freebsd-questions@FreeBSD.ORG; Thu, 7 Oct 1999 09:44:11 MST Date: Thu, 07 Oct 1999 09:46:00 -0600 (Mountain Daylight Time) From: Jason Lewis Subject: Re: again... In-reply-to: Cc: freebsd-questions@FreeBSD.ORG Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: 7BIT X-X-Sender: jlewis9@gwmta3.weber.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG True! On Thu, 7 Oct 1999, Kenneth Wayne Culver wrote: > Actually that's not quite correct, most of the ports for FreeBSD are also > precompiled as packages. > > > ================================================================= > | Kenneth Culver | FreeBSD: The best OS around. | > | Unix Systems Administrator | ICQ #: 24767726 | > | and student at The | AIM: AgRSkaterq | > | The University of Maryland, | Website: (Under Construction) | > | College Park. | http://www.wam.umd.edu/~culverk/| > ================================================================= > > On Thu, 7 Oct 1999, Jason Lewis wrote: > > > Pre-Compiled: no, source code and scripting: yes . > > > > >Sorry to bother you AGAIN but I forgot one more question...can you use any > > >UNIX Programs on FreeBSD? (e.g. perl) > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 8:48:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gfc-mad-proxy.gflesch.com (gfc-mad-proxy.gflesch.com [208.212.82.194]) by hub.freebsd.org (Postfix) with ESMTP id E073214D2A for ; Thu, 7 Oct 1999 08:48:16 -0700 (PDT) (envelope-from kwills@gflesch.com) Received: from gfc-mad-mail.gflesch.com (gfc-mad-mail.gflesch.int [10.1.1.25]) by gfc-mad-proxy.gflesch.com (8.9.2/8.9.1) with ESMTP id KAA46488; Thu, 7 Oct 1999 10:35:56 -0500 (CDT) (envelope-from kwills@gflesch.com) Received: by gfc-mad-mail.gflesch.int with Internet Mail Service (5.5.2448.0) id ; Thu, 7 Oct 1999 10:43:46 -0500 Message-ID: <058BE165CBA8D111A82E0008C79F9E3502484E@gfc-mad-dc.gflesch.int> From: "Wills, Ken" To: strben@altavista.net, fug-washdc@Sytex.Net, freebsd-questions@FreeBSD.ORG Subject: RE: Please help with a sound problem Date: Thu, 7 Oct 1999 10:43:47 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of > strben@altavista.net > Sent: Thursday, October 07, 1999 10:23 AM > To: fug-washdc@Sytex.Net; freebsd-questions@FreeBSD.ORG > Subject: Please help with a sound problem > > My configuration is based upon: > http://www.dvl-software.com/freebsd/sound.htm > > Below I am providing info from: > - uname -a > - cat /dev/sndstat > - dmesg > - pnpinfo > Please post your kernel configuration file also. Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 8:51:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ssc.wisc.edu (ssc.wisc.edu [144.92.190.57]) by hub.freebsd.org (Postfix) with ESMTP id C33C614FE8 for ; Thu, 7 Oct 1999 08:51:01 -0700 (PDT) (envelope-from dbongert@ssc.wisc.edu) Received: from copland.ssc.wisc.edu (copland.ssc.wisc.edu [144.92.190.86]) by ssc.wisc.edu (8.9.1a/8.9.1) with ESMTP id KAA24916 for ; Thu, 7 Oct 1999 10:49:44 -0500 (CDT) Received: (from dbongert@localhost) by copland.ssc.wisc.edu (8.9.3/8.9.1) id KAA04976 for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 10:49:43 -0500 Message-ID: X-Mailer: XFMail 1.3.1 [p0] on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Thu, 07 Oct 1999 10:49:43 -0500 (CDT) Organization: Social Sciences Computing Co-op From: Dan Bongert To: freebsd-questions@freebsd.org Subject: importance of NFS locking? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At work, I'm thinking of replacing our aging Tru64 Alpha mail server with a dual PIII running some variant of {Free|Net|Open}BSD. Most of my experience with Intel-based Unix has been with Linux, primarily RedHat. One of the things I noticed with Linux was the horrible NFS performance (that, and I don't really like RPMs--ports is much better). I'm not that experienced with NFS, and the way our mail (Sendmail, pop, and imap) server is set up requires lots of NFS traffic. (Serves mail spools via NFS, client for home directories for IMAP and stuff). Apparently, one of the large drawbacks to NFS for FreeBSD is the lack of file locking. But, it seems that lots of people use it, and even O'Reilly's NIS/NFS book mentions that locking apparently goes against the whole idea of NFS. Am I going to get in trouble for this recommendation? Or will it work OK? -- Dan Bongert dbongert@ssc.wisc.edu SSCC Unix System Administrator (608) 262-9857 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 8:56:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (Postfix) with ESMTP id D673B14E66 for ; Thu, 7 Oct 1999 08:56:34 -0700 (PDT) (envelope-from ChrisMic@clientlogic.com) Received: by site0s1 with Internet Mail Service (5.5.2448.0) id <4CMXC8WH>; Thu, 7 Oct 1999 11:56:11 -0400 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CD0@site2s1> From: Christopher Michaels To: 'Kenneth Wayne Culver' , Jason Lewis Cc: freebsd-questions@FreeBSD.ORG Subject: RE: again... Date: Thu, 7 Oct 1999 11:59:05 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Yes, but they are pre-compiled for FreeBSD! If you have a precompiled binary for a Sparc or alpha, or a number of other os's then no it won't work. If you have a pre-compiled binary FreeBSD (on i386) then yes it will work. Also, of course there is linux and SCO (?) emulation that will run binaries from those platforms as well. -Chris > -----Original Message----- > From: Kenneth Wayne Culver [SMTP:culverk@wam.umd.edu] > Sent: Thursday, October 07, 1999 11:02 AM > To: Jason Lewis > Cc: freebsd-questions@FreeBSD.ORG > Subject: Re: again... > > Actually that's not quite correct, most of the ports for FreeBSD are also > precompiled as packages. > > > ================================================================= > | Kenneth Culver | FreeBSD: The best OS around. | > | Unix Systems Administrator | ICQ #: 24767726 | > | and student at The | AIM: AgRSkaterq | > | The University of Maryland, | Website: (Under Construction) | > | College Park. | http://www.wam.umd.edu/~culverk/| > ================================================================= > > On Thu, 7 Oct 1999, Jason Lewis wrote: > > > Pre-Compiled: no, source code and scripting: yes . > > > > >Sorry to bother you AGAIN but I forgot one more question...can you use > any > > >UNIX Programs on FreeBSD? (e.g. perl) > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9: 2:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Samizdat.uucom.com (samizdat.uucom.com [198.202.217.54]) by hub.freebsd.org (Postfix) with ESMTP id ADCCF14C1C; Thu, 7 Oct 1999 09:02:16 -0700 (PDT) (envelope-from cshenton@uucom.com) Received: (from cshenton@localhost) by Samizdat.uucom.com (8.9.3/8.9.3) id MAA06186; Thu, 7 Oct 1999 12:02:03 -0400 (EDT) To: mjacob@feral.com Cc: Philip Hallstrom , freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? References: User-Agent: SEMI/1.13.3 (Komaiko) FLIM/1.12.5 (Hirahata) Emacs/20.3 (i386-pc-solaris2.7) MULE/4.0 (HANANOEN) MIME-Version: 1.0 (generated by SEMI 1.13.3 - "Komaiko") Content-Type: text/plain; charset=US-ASCII From: Chris Shenton Date: 07 Oct 1999 12:02:03 -0400 In-Reply-To: Matthew Jacob's message of "Wed, 6 Oct 1999 13:29:39 -0700 (PWT)" Message-ID: Lines: 20 X-Mailer: Gnus v5.6.45/Emacs 20.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 6 Oct 1999 13:29:39 -0700 (PWT), Matthew Jacob said: Matthew> I have to say I've been disappointed by low end DATs. If you Matthew> can, go to www.corpsys.com and get the older Archive DDS2 4 Matthew> slot changer- it's only 500$. I have one of these too, paid about $150 from an online auction house a couple years ago. Works real well with Amanda doing the scheduling and driving the robot. Got another for about $500 recently for an ISP I support, works well there too. Matthew> I have to say that the TR4/TR5 clones that HP seems to be Matthew> building seem pretty good. Media is expensive though. I also have a TR4 I got before the Archive: it's surprisingly fast but I find the media rather prohibitively expensive -- too much to have a few tapes worth of backup on my home systems. The DDS2 tapes are easy to find and cheap enough to have a pile of backups. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:16:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mx.seanet.com (dns2.seanet.com [199.181.164.2]) by hub.freebsd.org (Postfix) with ESMTP id ED3B314F39; Thu, 7 Oct 1999 09:16:41 -0700 (PDT) (envelope-from scott@c2-sab.seanet.com) Received: from c2-sab.seanet.com (c2-sab.seanet.com [204.182.113.50]) by mx.seanet.com (8.9.3/Seanet-8.7.3) with ESMTP id JAA09959; Thu, 7 Oct 1999 09:15:44 -0700 (PDT) Received: from c2-sab.seanet.com (localhost.seanet.com [127.0.0.1]) by c2-sab.seanet.com (8.9.3/8.9.3) with ESMTP id JAA60391; Thu, 7 Oct 1999 09:15:43 -0700 (PDT) (envelope-from scott@c2-sab.seanet.com) Message-Id: <199910071615.JAA60391@c2-sab.seanet.com> To: mjacob@feral.com Cc: Philip Hallstrom , freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? References: In-reply-to: From: Scott Blachowicz Reply-To: Scott.Blachowicz@seaslug.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-ID: <60353.939312943.1@c2-sab.seanet.com> Date: Thu, 07 Oct 1999 09:15:43 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Matthew Jacob wrote: > I have to say I've been disappointed by low end DATs. If you can, go to > www.corpsys.com and get the older Archive DDS2 4 slot changer- it's only > 500$. Otherwise, I say spend more money and get an HP DDS3 drive. Actually...I just checked their web site and their part number 4586NPR, "Archive SCSI2 F/H 16/32GB DAT-Includes a 4 cassette magazine" drive is now $395. Hmmm...now if only my computer toy budget weren't in the red...:-) Scott.Blachowicz@seaslug.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:17:49 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (Postfix) with ESMTP id 516D1157E1 for ; Thu, 7 Oct 1999 09:17:46 -0700 (PDT) (envelope-from ChrisMic@clientlogic.com) Received: by site0s1 with Internet Mail Service (5.5.2448.0) id <4CMXC929>; Thu, 7 Oct 1999 12:17:51 -0400 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CD1@site2s1> From: Christopher Michaels To: 'Cyril Brion' , freebsd-questions@freebsd.org Subject: RE: network netmask mystery Date: Thu, 7 Oct 1999 12:20:47 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG If you have 2 ips on the same subnet, on the same interface, you would make the aliased interface use 255.255.255.255. Otherwise you would want to use 255.255.255.0. -Chris > -----Original Message----- > From: Cyril Brion [SMTP:cbri@saios.com] > Sent: Thursday, October 07, 1999 7:49 AM > To: freebsd-questions@freebsd.org > Subject: network netmask mystery > > why do i have to configure the netmask with 255.255.255.255: my network > is on 255.255.255.0 ? > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:19:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 4508614E65; Thu, 7 Oct 1999 09:19:25 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from beppo.feral.com (beppo [192.67.166.79]) by feral.com (8.8.7/8.8.7) with ESMTP id JAA04884; Thu, 7 Oct 1999 09:19:04 -0700 Date: Thu, 7 Oct 1999 09:19:03 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Scott Blachowicz Cc: Philip Hallstrom , freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? In-Reply-To: <199910071615.JAA60391@c2-sab.seanet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Scott Blachowicz wrote: > Matthew Jacob wrote: > > > I have to say I've been disappointed by low end DATs. If you can, go to > > www.corpsys.com and get the older Archive DDS2 4 slot changer- it's only > > 500$. Otherwise, I say spend more money and get an HP DDS3 drive. > > Actually...I just checked their web site and their part number > 4586NPR, "Archive SCSI2 F/H 16/32GB DAT-Includes a 4 cassette magazine" > drive is now $395. Hmmm...now if only my computer toy budget weren't > in the red...:-) With the drop of disk prices over this year, your computer budget is in the red? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:36:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (Postfix) with ESMTP id 478B215347 for ; Thu, 7 Oct 1999 09:36:35 -0700 (PDT) (envelope-from ChrisMic@clientlogic.com) Received: by site0s1 with Internet Mail Service (5.5.2448.0) id <4CMXC944>; Thu, 7 Oct 1999 12:34:22 -0400 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CD3@site2s1> From: Christopher Michaels To: ' ' , freebsd-questions@freebsd.org Subject: RE: Problem unsubscribing from mailing list Date: Thu, 7 Oct 1999 12:37:12 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Just e-mail majordomo from an email account that works, and put in there the following: unsubscribe listname email-address Or if you want to be removed from every list quickly you can send the following: unsubscribe * email-address Of course fill in the proper listname and email-address. You will be sent confirmations, to the subscribed e-mail address. You can send those confirmations from the account that works, it doesn't have to be from the address in question. -Chris > -----Original Message----- > From: [SMTP:ifsmgr@my-Deja.com] > Sent: Tuesday, October 05, 1999 5:08 PM > To: freebsd-questions@freebsd.org > Subject: Problem unsubscribing from mailing list > > Hello, > > I subscribed to some FreeBSD mailing lists a long > time ago. Since then, changes were made to the FreeBSD > lists mailing system, such that it doesn't accept mail > from sites that do not do the reverse name lookup > properly. Because of this I'm not able to control > subscriptions through majordomo. > > What should I do? (No, I do not control our site DNS > configuration.) > > Thank you, > Stan > > > > --== Sent via Deja.com http://www.deja.com/ ==-- > Share what you know. Learn what you don't. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:37:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mx.seanet.com (dns2.seanet.com [199.181.164.2]) by hub.freebsd.org (Postfix) with ESMTP id 119EB15074; Thu, 7 Oct 1999 09:37:27 -0700 (PDT) (envelope-from scott@c2-sab.seanet.com) Received: from c2-sab.seanet.com (c2-sab.seanet.com [204.182.113.50]) by mx.seanet.com (8.9.3/Seanet-8.7.3) with ESMTP id JAA13146; Thu, 7 Oct 1999 09:36:32 -0700 (PDT) Received: from c2-sab.seanet.com (localhost.seanet.com [127.0.0.1]) by c2-sab.seanet.com (8.9.3/8.9.3) with ESMTP id JAA91711; Thu, 7 Oct 1999 09:36:24 -0700 (PDT) (envelope-from scott@c2-sab.seanet.com) Message-Id: <199910071636.JAA91711@c2-sab.seanet.com> To: mjacob@feral.com Cc: Philip Hallstrom , freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? References: In-reply-to: From: Scott Blachowicz Reply-To: Scott.Blachowicz@seaslug.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-ID: <91683.939314184.1@c2-sab.seanet.com> Date: Thu, 07 Oct 1999 09:36:24 -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Matthew Jacob wrote: > With the drop of disk prices over this year, your computer budget is in > the red? Oh...software upgrades, upgrading a system because of a dead motherboard (right after having bought a new disk), raiding the budget a little to stretch a new car down payment :-), ...sometimes I think the money just evaporates on its own :-). Scott.Blachowicz@seaslug.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:38:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netvisor.hu (mmtp89.mit.bme.hu [152.66.81.169]) by hub.freebsd.org (Postfix) with ESMTP id 10C991523E for ; Thu, 7 Oct 1999 09:37:50 -0700 (PDT) (envelope-from szoli@netvisor.hu) Received: from localhost (szoli@localhost) by netvisor.hu (8.8.7/8.8.7) with ESMTP id SAA29281 for ; Thu, 7 Oct 1999 18:39:41 +0200 Date: Thu, 7 Oct 1999 18:39:41 +0200 (CEST) From: Sebestyen Zoltan X-Sender: szoli@linux.intranet.netvisor.hu To: FreeBSD questions mailinglist Subject: ms-chap.. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG A question: does freebsd's ppp support ms-chap, a chap protocol extension done by Microsoft? =09=09THanks ---------------------------------------------------------------------------= ----- Sebesty=E9n Zolt=E1n =09I'm believing that the Holy Spir= it is =09=09=09=09=09gonna allow the hand, and the foot, and MAKE INSTALL NOT WAR=09=09=09the mouth, just to begin to speak, and to minister, and to heal coordinate= d by =09=09=09=09=09the head. I use UNIX because reboots are for hardware upgrades. Kick me! Whip me!! Make me develop on AIX!!! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:38:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id 20D4B1523E; Thu, 7 Oct 1999 09:38:45 -0700 (PDT) (envelope-from mjacob@feral.com) Received: from beppo.feral.com (beppo [192.67.166.79]) by feral.com (8.8.7/8.8.7) with ESMTP id JAA04954; Thu, 7 Oct 1999 09:38:40 -0700 Date: Thu, 7 Oct 1999 09:38:40 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Scott Blachowicz Cc: Philip Hallstrom , freebsd-hardware@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? In-Reply-To: <199910071636.JAA91711@c2-sab.seanet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Scott Blachowicz wrote: > Matthew Jacob wrote: > > > With the drop of disk prices over this year, your computer budget is in > > the red? > > Oh...software upgrades, upgrading a system because of a dead motherboard > (right after having bought a new disk), raiding the budget a little to stretch > a new car down payment :-), ...sometimes I think the money just > evaporates on its own :-). Repeat after me: "A car downpayment is not a computer budget item"....:-) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 9:54:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc.weber.edu (cc.weber.edu [137.190.1.2]) by hub.freebsd.org (Postfix) with ESMTP id AEF2B15231 for ; Thu, 7 Oct 1999 09:54:35 -0700 (PDT) (envelope-from jlewis@cc.weber.edu) Received: from WS10058574.weber.edu ([137.190.162.109]) by cc.WEBER.EDU (PMDF V5.1-12 #7039) with SMTP id <01JGUMNQTIW08Y8AUZ@cc.WEBER.EDU> for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 10:53:38 MST Date: Thu, 07 Oct 1999 10:55:28 -0600 (Mountain Daylight Time) From: Jason Lewis Subject: Re: ms-chap.. In-reply-to: To: Sebestyen Zoltan Cc: FreeBSD questions mailinglist Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Content-transfer-encoding: QUOTED-PRINTABLE X-X-Sender: jlewis9@gwmta3.weber.edu Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Where have I seen this before? I think it says something about this under man ppp . On Thu, 7 Oct 1999, Sebestyen Zoltan wrote: > A question: does freebsd's ppp support ms-chap, a chap protocol extension > done by Microsoft? >=20 > =09=09THanks >=20 > -------------------------------------------------------------------------= ------- > Sebesty=E9n Zolt=E1n =09I'm believing that the Holy Sp= irit is > =09=09=09=09=09gonna allow the hand, and the foot, and > MAKE INSTALL NOT WAR=09=09=09the mouth, just to begin to speak, and > to minister, and to heal coordina= ted by > =09=09=09=09=09the head. >=20 > I use UNIX because reboots are for hardware upgrades. >=20 > Kick me! Whip me!! Make me develop on AIX!!! >=20 >=20 >=20 > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message >=20 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 10: 0:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from florence.pavilion.net (florence.pavilion.net [194.242.128.25]) by hub.freebsd.org (Postfix) with ESMTP id 5198214EF3 for ; Thu, 7 Oct 1999 10:00:31 -0700 (PDT) (envelope-from joe@florence.pavilion.net) Received: (from joe@localhost) by florence.pavilion.net (8.9.3/8.8.8) id RAA37212; Thu, 7 Oct 1999 17:57:55 +0100 (BST) (envelope-from joe) Date: Thu, 7 Oct 1999 17:57:54 +0100 From: Josef Karthauser To: Sebestyen Zoltan Cc: FreeBSD questions mailinglist Subject: Re: ms-chap.. Message-ID: <19991007175754.E70248@florence.pavilion.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: X-NCC-RegID: uk.pavilion Organisation: Pavilion Internet plc, 24 The Old Steine, Brighton, BN1 1EL, England Phone: +44-845-333-5000 Fax: +44-845-333-5001 Mobile: +44-403-596893 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 06:39:41PM +0200, Sebestyen Zoltan wrote: > A question: does freebsd's ppp support ms-chap, a chap protocol extension > done by Microsoft? From the user-ppp manual: chap[05] [.... cut ...] When using CHAP as the client, you need only specify ``AuthName'' and ``AuthKey'' in /etc/ppp/ppp.conf. CHAP is accepted by de- fault. Some PPP implementations use "MS-CHAP" rather than MD5 when encrypting the challenge. MS-CHAP is a combination of MD4 and DES. If ppp was built on a machine with DES libraries avail- able, it will respond to MS-CHAP authentication requests, but will never request them. Joe -- Josef Karthauser FreeBSD: How many times have you booted today? Technical Manager Viagra for your server (http://www.uk.freebsd.org) Pavilion Internet plc. [joe@pavilion.net, joe@uk.freebsd.org, joe@tao.org.uk] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 10:41:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gateway.sitel.net (gateway.sitel.net [206.24.48.67]) by hub.freebsd.org (Postfix) with SMTP id 0325F151A1 for ; Thu, 7 Oct 1999 10:41:31 -0700 (PDT) (envelope-from jsw@iwww.sitel.net) Received: from [206.24.49.5] by gateway.sitel.net via smtpd (for hub.FreeBSD.ORG [204.216.27.18]) with SMTP; 7 Oct 1999 17:41:32 UT Received: (from jsw@localhost) by iwww.sitel.net (8.9.2/8.9.2) id MAA16970; Thu, 7 Oct 1999 12:39:13 -0500 (CDT) From: Jack Winslade Message-Id: <199910071739.MAA16970@iwww.sitel.net> Subject: Re: Wierd Directory listing In-Reply-To: from Matthew Joseff at "Oct 7, 99 10:28:43 am" To: mjoseff@retribution.net (Matthew Joseff) Date: Thu, 7 Oct 1999 12:39:12 -0500 (CDT) Cc: freebsd-questions@FreeBSD.ORG X-Mailer: ELM [version 2.4ME+ PL38 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > drwxr-xr-x 2 root wheel 512 Jun 10 13:48 xc > -rwsr-sr-t 1 root wheel 0 Dec 31 1969 ??t?'.?x?? > |7m?$??1????p???F?N????i?\D?K?? ???????????n?^}2z??&??B???????G??????n?B]6?????$s? > > WTF is that last entry? I can't remove it for the life of me. Ouch! That's a messy one! Looks like a corrupt file name with embedded linefeeds and such. The trick I use to remove unremovable files is to specify a pattern that matches only the bad one. I would first try: rm *7* ... or something like that. Alternatively, tar up all the good files to /tmp or something, rm -r the directory, and reload the tar. That's what I would do anyway. Good day JSW To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 10:41:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id 1BA8F152DC for ; Thu, 7 Oct 1999 10:41:48 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.251]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id MAA88156; Thu, 7 Oct 1999 12:40:26 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <008901bf10eb$099ff4a0$fba3f9cf@megared.net.mx> Reply-To: "Alejandro Ramirez" From: "Alejandro Ramirez" To: "Fadi Sodah" , References: <390319205.939223866025.JavaMail.root@web03_mc.mail.com> Subject: RE: Webmailserver Date: Thu, 7 Oct 1999 12:40:24 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, You may want to look at this link, it may help you: http://horde.org/papers/Scalable_webmail_HOWTO.html Ales ----- Original Message ----- From: Fadi Sodah To: Sent: Wednesday, October 06, 1999 10:31 AM Subject: Webmailserver > Hi > > I would like to build a web mail server such as > hotmail.com or mail.com .. etc. > What are the requirments to do this task? > > Thanks. > pons > > __________________________________________________ > FREE Email for ALL! Sign up at http://www.mail.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 10:48: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mta.lvdi.net (Mta.lvdi.net [216.24.138.2]) by hub.freebsd.org (Postfix) with SMTP id 34C6C15274 for ; Thu, 7 Oct 1999 10:47:58 -0700 (PDT) (envelope-from sdoty@mta.lvdi.net) Received: from mta.lvdi.net ([216.24.138.2]) by 216.24.138.2127.0.0.1 ; Thu, 07 Oct 1999 10:41:29 2000 PDT From: sdoty@mta.lvdi.net Reply-To: sdoty@mta.lvdi.net To: freebsd-questions@freebsd.org Date: Thu, 7 Oct 1999 10:41:29 +700 Subject: Judging limits X-Mailer: CWMail Web to Mail Gateway 2.2p, http://netwinsite.com/top_mail.htm Message-id: <37fcdb49.14078.0@mta.lvdi.net> X-User-Info: 24.234.46.35 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have been wondering how to judge what limits a certain machine can handle. When I install a new machine I always do some fine tuning. Like bumping up FD_SETSIZE to have more file handles. I add extra stuff to my kernel config to raise certain limits. A Example is something like this. options SOMAXCONN=2024 options NMBCLUSTERS=4096 options CHILD_MAX=1024 options OPEN_MAX=1024 options "MAXMEM=(256*1024)" options "MAXDSIZ=(256*1024*1024)" options "DFLDSIZ=(256*1024*1024)" options FD_SETSIZE=9096 My question is. How can I judge what a machine can handle as far as file handles or open childs. For example let say I have a, Pentium III 450mhz with 256ram. And scsi HD's. What can a machine like that handle? Is setting the FD_SETSIZE to 9096 asking for trouble? I know doing something like that to a low end machine might be. Now on the other hand I don't want to set these limits to low or I will start seeing out of file handle errors or out of mbuf's. But I don't want the machine to over run its limits either and crash. Thanks Steve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 10:56:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from iaces.com (horton.iaces.com [204.147.87.98]) by hub.freebsd.org (Postfix) with ESMTP id B415815326 for ; Thu, 7 Oct 1999 10:56:35 -0700 (PDT) (envelope-from proot@iaces.com) Received: (from proot@localhost) by iaces.com (8.9.3/8.9.3) id MAA08592; Thu, 7 Oct 1999 12:55:26 -0500 (CDT) From: "Paul T. Root" Message-Id: <199910071755.MAA08592@iaces.com> Subject: Re: Wierd Directory listing To: jsw@iwww.sitel.net (Jack Winslade) Date: Thu, 7 Oct 1999 12:55:26 -0500 (CDT) Cc: mjoseff@retribution.net (Matthew Joseff), freebsd-questions@FreeBSD.ORG In-Reply-To: <199910071739.MAA16970@iwww.sitel.net> from "Jack Winslade" at Oct 07, 1999 12:39:12 PM X-Organization: USWEST !nterprise Networking - ACES X-Phone: (612) 664-3385 X-Fax: (612) 664-4779 X-Page: (800) SKY-PAGE PIN: 537-7270 X-Address: 600 Stinson Blvd, Fl 1S X-Address: Minneapolis, MN 55413 X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Also, this is where filemanagers have there place. You may be able to drag and drop this one. In a previous message, Jack Winslade said: > > > drwxr-xr-x 2 root wheel 512 Jun 10 13:48 xc > > -rwsr-sr-t 1 root wheel 0 Dec 31 1969 ??t?'.?x?? > > |7m?$??1????p???F?N????i?\D?K?? > ???????????n?^}2z??&??B???????G??????n?B]6?????$s? > > > > WTF is that last entry? I can't remove it for the life of me. > > Ouch! That's a messy one! > > Looks like a corrupt file name with embedded linefeeds and such. > > The trick I use to remove unremovable files is to specify a pattern that > matches only the bad one. I would first try: > > rm *7* > > ... or something like that. > > Alternatively, tar up all the good files to /tmp or something, rm -r the > directory, and reload the tar. That's what I would do anyway. > > Good day JSW > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > -- HOW DO PEOPLE IN LOVE TYPICALLY BEHAVE? "All of a sudden, the people get movie fever so they can sit together in the dark." --Sherm, age 8 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11: 4:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mark.iacan.org (mark.iacan.org [208.1.106.133]) by hub.freebsd.org (Postfix) with ESMTP id 529D115865 for ; Thu, 7 Oct 1999 11:04:23 -0700 (PDT) (envelope-from kgun@mark.iacan.org) Received: (from kgun@localhost) by mark.iacan.org (8.9.3/8.9.3) id MAA35226 for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 12:04:23 -0600 (MDT) (envelope-from kgun) Date: Thu, 7 Oct 1999 12:04:23 -0600 From: "K. Gunderson" To: freebsd-questions@freebsd.org Subject: Proper cvsup base dir? Message-ID: <19991007120423.A35200@mark.iacan.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Greetings: I've never run cvsup before and looking at the docs and handbook I see a difference in the base dir used. cvsup defauts to /usr/local/etc/cvsup, yet the example files come configured to use /usr. It seems like the former would be the more "proper" location but the folks who provided the example files know a lot more about it than me. Now obviously this is not mission critical, but I'm curious about it and would appreciate it if somebody could enlighten me. -- Thanks--Ken http://www.y2know.org/safari Failure is not an option, it comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:16:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id A4DB6157D1 for ; Thu, 7 Oct 1999 11:16:25 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11ZI3z-00021s-00; Thu, 7 Oct 1999 11:14:47 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id LAA23386; Thu, 7 Oct 1999 11:14:42 -0700 Date: Thu, 7 Oct 1999 11:14:42 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: Wierd Directory listing To: Jack Winslade Cc: Matthew Joseff , freebsd-questions@FreeBSD.ORG In-Reply-To: <199910071739.MAA16970@iwww.sitel.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 7-Oct-99 at 10:42, Jack Winslade (jsw@iwww.sitel.net) wrote: > The trick I use to remove unremovable files is to specify a pattern that > matches only the bad one. I would first try: > > rm *7* Just a note for the paranoid: When I need to do something like this, I use the sequence: ls *7* rm *7* And, while we are on the topic of deleting inconviently named files; the easiest way to delete a file that starts with a dash is to put './' in front. E.g., rm ./-r -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:16:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id DDD86157D1 for ; Thu, 7 Oct 1999 11:16:33 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) id 11ZI4K-000229-00; Thu, 7 Oct 1999 11:15:08 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id LAA23392; Thu, 7 Oct 1999 11:15:04 -0700 Date: Thu, 7 Oct 1999 11:15:04 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: exabyte drives To: Paul Ragan Cc: freebsd-questions@FreeBSD.ORG In-Reply-To: <000b01bf1073$8ceeb1c0$52661dce@ragan> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 6-Oct-99 at 20:34, Paul Ragan (ragan@cland.net) wrote: > i have an old exabyte ibm 7802-011 scsi, do you know what the capacity is? Have you looked in the tech support area on the Exabyte Web site (http://www.exabyte.com/) ? The last time I checked, they had specs for both current and obsolete models. -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:16:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phoenix.volant.org (phoenix.volant.org [205.179.79.193]) by hub.freebsd.org (Postfix) with ESMTP id A515A157E1 for ; Thu, 7 Oct 1999 11:16:32 -0700 (PDT) (envelope-from patl@phoenix.volant.org) Received: from asimov.phoenix.volant.org ([205.179.79.65]) by phoenix.volant.org with smtp (Exim 1.92 #8) for freebsd-questions@FreeBSD.ORG id 11ZI4C-000220-00; Thu, 7 Oct 1999 11:15:00 -0700 Received: from localhost by asimov.phoenix.volant.org (SMI-8.6/SMI-SVR4) id LAA23389; Thu, 7 Oct 1999 11:14:58 -0700 Date: Thu, 7 Oct 1999 11:14:57 -0700 (PDT) From: patl@phoenix.volant.org Reply-To: patl@phoenix.volant.org Subject: Re: Netscape 4.7 To: freebsd-questions@FreeBSD.ORG In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 7-Oct-99 at 06:55, Brett Taylor (brett@peloton.runet.edu) wrote: > Hi, > > On Thu, 7 Oct 1999, Sheldon Hearn wrote: > > On Thu, 07 Oct 1999 02:33:07 +0100, J McKitrick wrote: > > > > > Does it make sense to get the Linux version? I've heard it may run > > > better or have more plugins. Or is the native FBSD good enough? > > > > The advantage of the Linux version is that some plugins may work. > > There aren't many (any?) plugins for the FreeBSD binary. > > There are a flew plugins for FreeBSD in the ports tree (flash just got > committed and tclplugin is in there) Another one available as source is UMP - the Unix MIDI Plugin. > and there's also the plugger port > which acts as a plugin and pipes stuff through to external apps. Example: > you have a quicktime movie plugin on some site - plugger goes and pipes > the movie through to xanim (or a number of other possibilities). I've had > moderate success with this - it won't help w/ Flash or using Real plugins, > but you can use the flash plugin in ports now and have the Real stuff work > as an external app, instead of a plugin and that works. Note that if the external app can take a command-line parameter to tell it to display in a pre-allocated window, it can be made to appear as an in-line plug-in instead of an external app. Personally, for me the desire to run native mode programs outweighs the advantages of the few available Linux plugins. And even if I were to switch to the Linux Netscape; I'd still download each new FreeBSD version just to keep their hit rate up and let them know there's interest in keeping it up to date; and maybe even making an official FreeBSD release. -Pat To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:18: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from tiger.fhsu.edu (tiger.fhsu.edu [198.248.101.178]) by hub.freebsd.org (Postfix) with ESMTP id 4EAD915291 for ; Thu, 7 Oct 1999 11:17:56 -0700 (PDT) (envelope-from afleming@tiger.fhsu.edu) Subject: KDE Install on 3.1 To: freebsd-questions@freebsd.org Cc: X-Mailer: Lotus Notes Release 5.0.1a August 17, 1999 Message-ID: From: afleming@tiger.fhsu.edu Date: Thu, 7 Oct 1999 13:17:53 -0500 X-Priority: 3 (Normal) X-MIMETrack: Serialize by Router on NotesHub/FHSU(Release 5.0.1a|August 17, 1999) at 10/07/99 01:18:00 PM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a system that is currently running FreeBSD 3.1, I plan to upgrade it to 3.3, but it is in production, so I will not be about to preform the upgrade for another month. I want to Install KDE on this system. I have had trouble getting part of KDE to compile when I run a make from the latest port. Can I use the 3.3 CD to install the distribution of KDE that comes with it, or will that cause problems, since I haven't upgraded to 3.3 yet. Thanks Andrew Fleming Fort Hays State University Computing Center Phone: (785) 628-5688 E-mail: afleming@fhsu.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:25:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from out5.prserv.net (out5.prserv.net [165.87.194.243]) by hub.freebsd.org (Postfix) with ESMTP id 21C0714A27 for ; Thu, 7 Oct 1999 11:25:19 -0700 (PDT) (envelope-from w3lng@ibm.net) Received: from ibm.net (slip166-72-171-93.pa.us.prserv.net [166.72.171.93]) by out5.prserv.net (/) with ESMTP id SAA149500 for ; Thu, 7 Oct 1999 18:24:02 GMT Message-ID: <37FCE53A.ACA7B490@ibm.net> Date: Thu, 07 Oct 1999 18:23:54 +0000 From: "Edmund D. Haube" X-Mailer: Mozilla 4.5 [en] (X11; U; Linux 2.0.34 i586) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: FreeBSD on second master disk Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have loaded FreeBSD on a second master hard disk in this machine. No problem. Tried to load it and got the message 'panic: unable to load /root'. Found solution to problem inTROUBLE. TXT and proceeded to use 'Fixit' as suggested. Typed in the line '1:wd(2,a)kernel' and get the error msg back 'Syntex error: word unexpected (expecting ")") '. Not matter what substitutions I make in the line (GENERIC, kernel.GENERIC, /kernel, and so forth) the error message comes back. Tried leaving out words, changing numbers putting in "(" and ")" in various places and still syntax error or 'cannot find wd'. Where did I go wrong? Ed w3lng@ibm.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:33:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id 4788414CE0 for ; Thu, 7 Oct 1999 11:31:20 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id VAA24538; Thu, 7 Oct 1999 21:27:25 +0300 (EEST) (envelope-from ru) Date: Thu, 7 Oct 1999 21:27:24 +0300 From: Ruslan Ermilov To: "K. Gunderson" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Proper cvsup base dir? Message-ID: <19991007212724.B21528@relay.ucb.crimea.ua> Mail-Followup-To: "K. Gunderson" , freebsd-questions@FreeBSD.ORG References: <19991007120423.A35200@mark.iacan.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <19991007120423.A35200@mark.iacan.org>; from K. Gunderson on Thu, Oct 07, 1999 at 12:04:23PM -0600 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 12:04:23PM -0600, K. Gunderson wrote: > Greetings: > > I've never run cvsup before and looking at the docs and handbook I see a > difference in the base dir used. cvsup defauts to /usr/local/etc/cvsup, yet > the example files come configured to use /usr. It seems like the former > would be the more "proper" location but the folks who provided the > example files know a lot more about it than me. Now obviously > this is not mission critical, but I'm curious about it and would > appreciate it if somebody could enlighten me. > You can use either, of course, but putting a bookkeeping files into /usr is not considered good for me. I have it set to /usr/local/etc/cvsup. After all, /usr/share/examples is only examples :-) Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 11:39: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chronis.pobox.com (chronis.pobox.com [208.210.124.49]) by hub.freebsd.org (Postfix) with ESMTP id D16E114CE0 for ; Thu, 7 Oct 1999 11:38:59 -0700 (PDT) (envelope-from scott@chronis.pobox.com) Received: by chronis.pobox.com (Postfix, from userid 1001) id 706209B8D; Thu, 7 Oct 1999 14:37:47 -0400 (EDT) Date: Thu, 7 Oct 1999 14:37:47 -0400 From: scott To: freebsd-questions@FreeBSD.ORG Subject: Re: Wierd Directory listing Message-ID: <19991007143747.A80742@chronis.pobox.com> Mail-Followup-To: freebsd-questions@FreeBSD.ORG References: <199910071739.MAA16970@iwww.sitel.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.7i In-Reply-To: X-Mailer: Mutt v2.03pl02 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG one can also delete stuff like this with dired mode in emacs. just run 'emacs .' in the offending directory. scott On Thu, Oct 07, 1999 at 11:14:42AM -0700, patl@phoenix.volant.org wrote: > On 7-Oct-99 at 10:42, Jack Winslade (jsw@iwww.sitel.net) wrote: > > The trick I use to remove unremovable files is to specify a pattern that > > matches only the bad one. I would first try: > > > > rm *7* > > Just a note for the paranoid: When I need to do something like > this, I use the sequence: > > ls *7* > > rm *7* > > And, while we are on the topic of deleting inconviently named > files; the easiest way to delete a file that starts with a dash > is to put './' in front. E.g., > > rm ./-r > > > -Pat > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 12:25: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 0D1CE1517C for ; Thu, 7 Oct 1999 12:24:57 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 14722 invoked from network); 7 Oct 1999 19:24:43 -0000 Received: from useraf05.uk.uudial.com (HELO marder-1.) (62.188.131.246) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 19:24:43 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA00372; Thu, 7 Oct 1999 20:21:09 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 20:21:09 +0100 From: Mark Ovens To: "Francis J. Bruening" Cc: freebsd Subject: Re: question after rebuild of kernel: config of non-existent devices Message-ID: <19991007202109.A316@marder-1> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, Oct 06, 1999 at 10:32:43PM -0700, Francis J. Bruening wrote: > Hi, > > I just did my first "make world" & kernel rebuild. Everything seems > to be working well, but I'm curious about some boot msgs. > > dmesg shows > > ... > real memory = 128M... > config> di zp0 > no such device ep0 > invalid command.. type ? for help > config> di ze0 > ... > ... > > this continues on for many devices. Strangely enough (or not > so strangely) they seem to be the devices I commented out of the GENERIC > kernel... > You must previously have disabled them through ``boot -c''. This saves the settings to /boot/boot.conf and runs like an auto-answer file for the boot time config editor. As you have not included these in your new kernel it doesn't know what they are (``di ze0'' means "disable ze0"). BTW, don't just comment out the entries in boot.conf or you'l get errors like: config> # pnp 1 0 irq0 5 drq0 1 drq1 5 Invalid command or syntax. Type `?' for help. HTH > so my question is what do I need to change to stop this behavior? > I reread the handbook (although i admit to bloodshot eyes)what am > I missing? > > thanks in advance > > Regards, > > Francis Bruening > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 12:51:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id DDAEF15376 for ; Thu, 7 Oct 1999 12:51:23 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 18183 invoked from network); 7 Oct 1999 19:50:20 -0000 Received: from userbl49.uk.uudial.com (HELO marder-1.) (62.188.144.156) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 19:50:20 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA00725; Thu, 7 Oct 1999 20:33:24 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 20:33:24 +0100 From: Mark Ovens To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: how do i get modem connection speed from ppp? Message-ID: <19991007203324.C316@marder-1> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 12:35:41PM +0100, J McKitrick wrote: > Which of the stats used with the 'show' command will let me see the speed > of the current ppp connection? > ``show modem'' > -jm > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 12:51:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 5B77714D51 for ; Thu, 7 Oct 1999 12:51:31 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 18196 invoked from network); 7 Oct 1999 19:50:23 -0000 Received: from userbl49.uk.uudial.com (HELO marder-1.) (62.188.144.156) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 19:50:23 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA00742; Thu, 7 Oct 1999 20:38:33 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 20:38:33 +0100 From: Mark Ovens To: patl@phoenix.volant.org Cc: Jack Winslade , Matthew Joseff , freebsd-questions@freebsd.org Subject: Re: Wierd Directory listing Message-ID: <19991007203833.D316@marder-1> References: <199910071739.MAA16970@iwww.sitel.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 11:14:42AM -0700, patl@phoenix.volant.org wrote: > On 7-Oct-99 at 10:42, Jack Winslade (jsw@iwww.sitel.net) wrote: > > The trick I use to remove unremovable files is to specify a pattern that > > matches only the bad one. I would first try: > > > > rm *7* > > Just a note for the paranoid: When I need to do something like > this, I use the sequence: > > ls *7* > > rm *7* > Another one is to use ``rm -i *'', but be careful about answering ``y'' :) It worked for me. Curiously, ``rm -i'' displayed the offending chars differently to ls(1) which, as in the example, just uses the wildcard ``?'' Hmm. > And, while we are on the topic of deleting inconviently named > files; the easiest way to delete a file that starts with a dash > is to put './' in front. E.g., > > rm ./-r > > > -Pat > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 12:51:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 3D2C414D42 for ; Thu, 7 Oct 1999 12:51:26 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 18188 invoked from network); 7 Oct 1999 19:50:22 -0000 Received: from userbl49.uk.uudial.com (HELO marder-1.) (62.188.144.156) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 19:50:22 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id UAA00764; Thu, 7 Oct 1999 20:41:51 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 20:41:51 +0100 From: Mark Ovens To: "K. Gunderson" Cc: freebsd-questions@freebsd.org Subject: Re: Proper cvsup base dir? Message-ID: <19991007204151.E316@marder-1> References: <19991007120423.A35200@mark.iacan.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991007120423.A35200@mark.iacan.org> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 12:04:23PM -0600, K. Gunderson wrote: > Greetings: > > I've never run cvsup before and looking at the docs and handbook I see a > difference in the base dir used. cvsup defauts to /usr/local/etc/cvsup, yet > the example files come configured to use /usr. It seems like the former > would be the more "proper" location but the folks who provided the > example files know a lot more about it than me. Now obviously > this is not mission critical, but I'm curious about it and would > appreciate it if somebody could enlighten me. > FreeBSD uses /usr, /usr/doc, /usr/src, /usr/ports. See http://www.polstra.com/projects/freeware/CVSup/faq.html for lots of useful info on using cvsup from the guy who wrote it. > -- > Thanks--Ken > http://www.y2know.org/safari > > Failure is not an option, it comes bundled with your Microsoft product. > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 12:52:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns.clientlogic.com (ns.clientlogic.com [207.51.66.75]) by hub.freebsd.org (Postfix) with ESMTP id 2C77E1512E for ; Thu, 7 Oct 1999 12:52:25 -0700 (PDT) (envelope-from ChrisMic@clientlogic.com) Received: by site0s1 with Internet Mail Service (5.5.2448.0) id <4CMXDCQF>; Thu, 7 Oct 1999 15:51:46 -0400 Message-ID: <6C37EE640B78D2118D2F00A0C90FCB4401105CD6@site2s1> From: Christopher Michaels To: 'Bryce Newall' , Sheldon Hearn Cc: FreeBSD Questions List Subject: RE: segfaults on updatedb and /etc/security Date: Thu, 7 Oct 1999 15:54:41 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I don't know how helpful this will be now, but aren't segfaults listed in the dmesg output? Instead of having to dig through several levels of shell scripts to find out what exactly is segfaulting. -Chris > -----Original Message----- > From: Bryce Newall [SMTP:data@dreamhaven.net] > Sent: Saturday, October 02, 1999 1:16 AM > To: Sheldon Hearn > Cc: FreeBSD Questions List > Subject: segfaults on updatedb and /etc/security > > On Fri, 1 Oct 1999, Sheldon Hearn wrote: > > > > + locate.mklocatedb -presort > > > Segmentation fault > > > > How about that, the segfault is happening in another shell script. :-) > > Good point. :) Here's another set of output, this time with the changed > locate.updatedb script (the segfault is near the end): > > + : /etc/locate.rc > + [ -f /etc/locate.rc -a -r /etc/locate.rc ] > + . /etc/locate.rc > + : /usr/libexec > + export LIBEXECDIR > + : /tmp > + export TMPDIR > + mktemp -d /tmp/locateXXXXXX > + TMPDIR=/tmp/locateq26778 > + > PATH=/usr/libexec:/bin:/usr/bin:/root/bin:/sbin:/usr/sbin:/usr/local/sbin: > /usr/X11R6/bin:/usr/games:/root/bin:/bin:/usr/bin:/usr/local/bin:. > + export PATH > + : locate.mklocatedb > + : /var/db/locate.database > + : / > + : /tmp /usr/tmp /var/tmp > + : ufs > + : find > + excludes=! ( or= > + excludes=! ( -fstype ufs > + or=-or > + excludes=! ( -fstype ufs ) -prune > + excludes=! ( -fstype ufs ) -prune -or -path /tmp -prune > + excludes=! ( -fstype ufs ) -prune -or -path /tmp -prune -or -path > /usr/tmp -prune > + excludes=! ( -fstype ufs ) -prune -or -path /tmp -prune -or -path > /usr/tmp -prune -or -path /var/tmp -prune > + tmp=/tmp/locateq26778/_updatedb26776 > + trap rm -f $tmp; rmdir $TMPDIR 0 1 2 3 5 10 15 > + find -s / ! ( -fstype ufs ) -prune -or -path /tmp -prune -or -path > /usr/tmp -prune -or -path /var/tmp -prune -or -print > + sh -x locate.mklocatedb -presort > + : /usr/libexec > + export LIBEXECDIR > + > PATH=/usr/libexec:/bin:/usr/bin:/usr/libexec:/bin:/usr/bin:/root/bin:/sbin > :/usr/sbin:/usr/local/sbin:/usr/X11R6/bin:/usr/games:/root/bin:/bin:/usr/b > in:/usr/local/bin:. > + export PATH > + umask 077 > + : /tmp/locateq26778 > + export TMPDIR > + test -d /tmp/locateq26778 > + mktemp -d /tmp/locateq26778/mklocateXXXXXX > + TMPDIR=/tmp/locateq26778/mklocateU26782 > + : locate.bigram > + : locate.code > + : sort > + sortopt=-u -T /tmp/locateq26778/mklocateU26782 > + sortcmd=sort > + bigrams=/tmp/locateq26778/mklocateU26782/_mklocatedb26780.bigrams > + filelist=/tmp/locateq26778/mklocateU26782/_mklocatedb26780.list > + trap rm -f $bigrams $filelist; rmdir $TMPDIR 0 1 2 3 5 10 15 > + [ X-presort = X-presort ] > + shift > + true > + locate.code /tmp/locateq26778/mklocateU26782/_mklocatedb26780.bigrams > Segmentation fault > + locate.bigram > + sort -nr > + head -128 > + perl -ne /^\s*[0-9]+\s(..)$/ && print $1 || exit 1 > + locate -d /tmp/locateq26778/mklocateU26782/_mklocatedb26780.list / > + locate -d /tmp/locateq26778/mklocateU26782/_mklocatedb26780.list / > + locate.code /tmp/locateq26778/mklocateU26782/_mklocatedb26780.bigrams > + exit > + rm -f /tmp/locateq26778/mklocateU26782/_mklocatedb26780.bigrams > /tmp/locateq26778/mklocateU26782/_mklocatedb26780.list > + rmdir /tmp/locateq26778/mklocateU26782 > + find /tmp/locateq26778/_updatedb26776 -size -257c -print > + cat /tmp/locateq26778/_updatedb26776 > + rm -f /tmp/locateq26778/_updatedb26776 > + rmdir /tmp/locateq26778 > > ********************************************************************** > * Bryce Newall * Email: data@dreamhaven.net * > * WWW: http://www.dreamhaven.net/~data * ICQ: 461599 * > * "Insanity takes its toll. Please have exact change." * > ********************************************************************** > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13: 2: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from defiant.quansoo.com (defiant.quansoo.com [63.66.225.90]) by hub.freebsd.org (Postfix) with ESMTP id A6A4A14DFB for ; Thu, 7 Oct 1999 13:02:00 -0700 (PDT) (envelope-from cgriffiths@quansoo.com) Received: from localhost (cgriffiths@localhost) by defiant.quansoo.com (8.9.3/8.9.3) with ESMTP id QAA08241 for ; Thu, 7 Oct 1999 16:01:18 -0400 (EDT) (envelope-from cgriffiths@quansoo.com) X-Authentication-Warning: defiant.quansoo.com: cgriffiths owned process doing -bs Date: Thu, 7 Oct 1999 16:01:18 -0400 (EDT) From: "Christopher T. Griffiths" To: freebsd-questions@freebsd.org Subject: Blackdown JDK1.2 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Has anyone had any luck getting the blackdown jdk1.2 port to work with FreeBSD. I am currently running the linux emulation ports and 3.3 -stable on my testbox and I would really like to get this working. If anyone has any suggestions they would be greatly appreciated. Thanks Chris Christopher T. Griffiths Senior Network/Systems Administrator Quansoo Group Inc. cgriffiths@quansoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13: 2:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mark.iacan.org (mark.iacan.org [208.1.106.133]) by hub.freebsd.org (Postfix) with ESMTP id 8372D1517C for ; Thu, 7 Oct 1999 13:02:12 -0700 (PDT) (envelope-from kgun@mark.iacan.org) Received: (from kgun@localhost) by mark.iacan.org (8.9.3/8.9.3) id OAA35486; Thu, 7 Oct 1999 14:00:39 -0600 (MDT) (envelope-from kgun) Date: Thu, 7 Oct 1999 14:00:39 -0600 From: "K. Gunderson" To: Mark Ovens Cc: "K. Gunderson" , freebsd-questions@freebsd.org Subject: Re: Proper cvsup base dir? Message-ID: <19991007140039.A35453@mark.iacan.org> References: <19991007120423.A35200@mark.iacan.org> <19991007204151.E316@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: <19991007204151.E316@marder-1>; from Mark Ovens on Thu, Oct 07, 1999 at 08:41:51PM +0100 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 08:41:51PM +0100, Mark Ovens wrote: > On Thu, Oct 07, 1999 at 12:04:23PM -0600, K. Gunderson wrote: > > Greetings: > > > > I've never run cvsup before and looking at the docs and handbook I see a > > difference in the base dir used. cvsup defauts to /usr/local/etc/cvsup, yet > > the example files come configured to use /usr. It seems like the former > > would be the more "proper" location but the folks who provided the > > example files know a lot more about it than me. Now obviously > > this is not mission critical, but I'm curious about it and would > > appreciate it if somebody could enlighten me. > > > > FreeBSD uses /usr, /usr/doc, /usr/src, /usr/ports. > > See http://www.polstra.com/projects/freeware/CVSup/faq.html for > lots of useful info on using cvsup from the guy who wrote it. I've read this before I posted;) The prefix dir is where the /usr/src, /usr/ports, etc. go. No confusion there. My question pertained to the base dir, which affects where the checkout files go. My confusion about this arises out of inconsistencies between the FAQ, example files, and the Handbook. -- Ciao--Ken http://www.y2know.org/safari Failure is not an option, it comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13: 2:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id 362F31512E for ; Thu, 7 Oct 1999 13:02:39 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 19831 invoked from network); 7 Oct 1999 20:02:33 -0000 Received: from userbl49.uk.uudial.com (HELO marder-1.) (62.188.144.156) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 20:02:33 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id VAA01010; Thu, 7 Oct 1999 21:02:26 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 21:02:26 +0100 From: Mark Ovens To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: how do i get modem connection speed from ppp? Message-ID: <19991007210226.B817@marder-1> References: <19991007203324.C316@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991007203324.C316@marder-1> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 08:33:24PM +0100, Mark Ovens wrote: > On Thu, Oct 07, 1999 at 12:35:41PM +0100, J McKitrick wrote: > > Which of the stats used with the 'show' command will let me see the speed > > of the current ppp connection? > > > > ``show modem'' > Seems this is actually dependent on which version of FreeBSD you're running. ``show modem'' was (is) valid in 3.1, but in 3.3-STABLE it isn't, you need ``show physical''. I do wish Brian would stop changing things ;-) > > -jm > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > -- > STATE-OF-THE-ART: Any computer you can't afford. > OBSOLETE: Any computer you own. > ________________________________________________________________ > FreeBSD - The Power To Serve http://www.freebsd.org > My Webpage http://ukug.uk.freebsd.org/~mark/ > mailto:mark@ukug.uk.freebsd.org http://www.radan.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13: 4:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 9468D14DFB for ; Thu, 7 Oct 1999 13:04:04 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZJlF-000Ccs-00; Thu, 07 Oct 1999 22:03:33 +0200 From: Sheldon Hearn To: "Edmund D. Haube" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD on second master disk In-reply-to: Your message of "Thu, 07 Oct 1999 18:23:54 GMT." <37FCE53A.ACA7B490@ibm.net> Date: Thu, 07 Oct 1999 22:03:33 +0200 Message-ID: <48537.939326613@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 18:23:54 GMT, "Edmund D. Haube" wrote: > I have loaded FreeBSD on a second master hard disk in this machine. > No problem. Tried to load it and got the message 'panic: unable to > load /root'. Found solution to problem inTROUBLE. TXT and proceeded > to use 'Fixit' as suggested. Looks like TROUBLE.TXT is outdated. That advice is for the old boot loader. :-( Try this: set num_ide_disks=2 set rootdev=wd2s1a boot This stuff is documented in the loader(8) manpage if you have access to it. Ciao, Sheldon. PS: I've only had this once myself, so my instructions may not be 100%. You might need to fiddle. :-) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13: 8:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 16B141525C for ; Thu, 7 Oct 1999 13:08:28 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 14441 invoked from network); 7 Oct 1999 20:08:09 -0000 Received: from userbl49.uk.uudial.com (HELO marder-1.) (62.188.144.156) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 20:08:09 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id VAA01048; Thu, 7 Oct 1999 21:08:07 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 21:07:57 +0100 From: Mark Ovens To: "K. Gunderson" Cc: freebsd-questions@freebsd.org Subject: Re: Proper cvsup base dir? Message-ID: <19991007210757.C817@marder-1> References: <19991007120423.A35200@mark.iacan.org> <19991007204151.E316@marder-1> <19991007140039.A35453@mark.iacan.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991007140039.A35453@mark.iacan.org> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 02:00:39PM -0600, K. Gunderson wrote: > On Thu, Oct 07, 1999 at 08:41:51PM +0100, Mark Ovens wrote: > > On Thu, Oct 07, 1999 at 12:04:23PM -0600, K. Gunderson wrote: > > > Greetings: > > > > > > I've never run cvsup before and looking at the docs and handbook I see a > > > difference in the base dir used. cvsup defauts to /usr/local/etc/cvsup, yet > > > the example files come configured to use /usr. It seems like the former > > > would be the more "proper" location but the folks who provided the > > > example files know a lot more about it than me. Now obviously > > > this is not mission critical, but I'm curious about it and would > > > appreciate it if somebody could enlighten me. > > > > > > > FreeBSD uses /usr, /usr/doc, /usr/src, /usr/ports. > > > > See http://www.polstra.com/projects/freeware/CVSup/faq.html for > > lots of useful info on using cvsup from the guy who wrote it. > > I've read this before I posted;) The prefix dir is where the /usr/src, > /usr/ports, etc. go. No confusion there. My question pertained to the > base dir, which affects where the checkout files go. My confusion about > this arises out of inconsistencies between the FAQ, example files, and > the Handbook. > I've just started using cvsup so it's still fairly fresh in my mind. My checkouts are in /usr/sup/{doc-all,src-all,ports-all} (and my global refuse file is in /usr/sup). The supfiles I use, from /usr/share/examples/cvsup, are: *default host=cvsup.uk.FreeBSD.org *default base=/usr *default prefix=/usr *default release=cvs tag=. *default delete use-rel-suffix *default compress src-all HTH > > -- > Ciao--Ken > http://www.y2know.org/safari > > Failure is not an option, it comes bundled with your Microsoft product. -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:13:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rmc1.crocker.com (rmc1.crocker.com [204.97.12.50]) by hub.freebsd.org (Postfix) with ESMTP id 7C27414BD0 for ; Thu, 7 Oct 1999 13:13:05 -0700 (PDT) (envelope-from jay@heliosonline.com) Received: from pdp20 (ip101-95.dialup.crocker.net [140.186.101.95]) by rmc1.crocker.com (8.9.3/8.9.3) with SMTP id QAA12539; Thu, 7 Oct 1999 16:15:38 -0400 Reply-To: From: "Roland Jay Roberts" To: "Philip Hallstrom" Cc: "FreeBSD Questions" Subject: RE: Which tape drive: CTD8000, C1533A, STD28000N, or STD5000? Date: Thu, 7 Oct 1999 16:10:46 -0400 Message-ID: <001d01bf1100$0a7dec00$050a0a0a@helios> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2377.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 In-Reply-To: Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > I have to say I've been disappointed by low end DATs. If you can, go to > > www.corpsys.com and get the older Archive DDS2 4 slot changer- it's only > > 500$. Otherwise, I say spend more money and get an HP DDS3 drive. > > > > I have to say that the TR4/TR5 clones that HP seems to be building seem > > pretty good. Media is expensive though. > > Are they decent drives? I didn't include them in my list due to the > number of posts in these mailing lists complaining about them. The drive > itself seems a lot cheaper. Media seems to be about $30... so if you > don't need many tapes is that a good way to go? I've got a Seagate TR4 drive (SCSI) on my system at home. I haven't had any problems with it; it's a nice drive. The price of the tapes is a limiting factor, but if you don't need many (i.e., home use, for instance, or a server where things don't change (much)), it would certainly be an economical solution. // Jay Roberts // HELIOS Custom Training, Inc. // mailto:jay@heliosonline.com // http://www.heliosonline.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:21:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.kar.net (mail.kar.net [195.178.131.134]) by hub.freebsd.org (Postfix) with ESMTP id 22F3B152BA for ; Thu, 7 Oct 1999 13:21:47 -0700 (PDT) (envelope-from kushn@mail.kar.net) Received: from 179.dialup.kar.net (179.dialup.kar.net [195.178.130.179]) by mail.kar.net (8.9.3/8.9.3) with ESMTP id XAA13252; Thu, 7 Oct 1999 23:17:42 +0300 (EET DST) Date: Thu, 7 Oct 1999 23:20:12 +0300 (EEST) From: Vladimir Kushnir X-Sender: volodya@kushnir.kiev.ua To: Alexander Karptsov Cc: freebsd-questions@FreeBSD.ORG Subject: Re: XKB settings for Russian keyboard wuth XFree86 3.3.5? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks a lot. Silly me, it's so simple! I've found workaround, though (under Window Maker): it can assign nearly any combination to group switch (well, perhaps except usual M$ Alt+Shift :-). Anyway, thanks. On Thu, 7 Oct 1999, Alexander Karptsov wrote: > > > On Thu, 7 Oct 1999, Vladimir Kushnir wrote: > > > Hello, > > Does anybody set these with 3.3.5 (I mean, _not_ through Xmodmap)? If so, > > would you please post them? For some reason, my old 3.3.3.1 settings > > (and those in Handbook) doesn't work anymore, particularly - CapsLock > > doesn't switch groups. Has something changed there? > > apply it to /usr/X11R6/lib/X11/xkb/keymap/xfree86: > Regards, Vladimir ===========================|======================= Vladimir Kushnir | kushn@mail.kar.net, | Powered by FreeBSD kushnir@ap3.bitp.kiev.ua | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:33:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from math.udel.edu (math.udel.edu [128.175.16.7]) by hub.freebsd.org (Postfix) with ESMTP id 5F9E21522E for ; Thu, 7 Oct 1999 13:33:20 -0700 (PDT) (envelope-from schwenk@math.udel.edu) Received: from math.udel.edu (sisyphus.math.udel.edu [128.175.16.167]) by math.udel.edu (8.9.3+Sun/8.9.1) with ESMTP id QAA19428 for ; Thu, 7 Oct 1999 16:33:18 -0400 (EDT) Message-ID: <37FD038E.B47709F7@math.udel.edu> Date: Thu, 07 Oct 1999 16:33:18 -0400 From: Peter Schwenk Organization: University of Delaware X-Mailer: Mozilla 4.7 [en] (X11; I; SunOS 5.7 sun4u) X-Accept-Language: en, fr, de MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Weird Missing 'local' Distribution Message During Installation of 3.3-R Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG With both the CD from Walnut Creek and a CD made from a recently-downloaded ISO, I get an error message about the installer not being able to install the 'local' distribution. I've perused the mailing-list archive, and there were a few others who noticed this, but there were no definitive answers. The system runs fine, as far as I can tell, but the message makes me wonder if I'm missing something. I've subscribed to the list today, so I've missed any resent postings about this topic, if there were any. Could someone please shed some light on this error message? -- PETER SCHWENK | UNIX System Administrator Department of Mathematical Sciences | University of Delaware schwenk@math.udel.edu | (302)831-0437 <-NEW!!! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:45:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail3.atl.bellsouth.net (mail3.atl.bellsouth.net [205.152.0.38]) by hub.freebsd.org (Postfix) with ESMTP id 2E0641525C for ; Thu, 7 Oct 1999 13:45:25 -0700 (PDT) (envelope-from allenc@mindsieve.com) Received: from spamer_death (adsl-77-225-87.atl.bellsouth.net [216.77.225.87]) by mail3.atl.bellsouth.net (3.3.4alt/0.75.2) with SMTP id QAA00905 for ; Thu, 7 Oct 1999 16:43:43 -0400 (EDT) Message-Id: <3.0.5.32.19991007164244.00814680@mindsieve.com> X-Sender: allenc@mindsieve.com (Unverified) X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Thu, 07 Oct 1999 16:42:44 -0400 To: freebsd-questions@FreeBSD.ORG From: Allen Cleveland Subject: Getting more info from icmp-response bandwidth limit Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I included the bandwidth limit in the kernel ( 3-3-RC atm ) and, as predicted, it's doing it's job. What I'm interested in is getting the IP address into the message that these packets are claiming to come from. I understand that the IP information may not be correct, due to spoofing, but I'd like this information in the message anyway. I'd also like to have the time in the security check output so I can provide the required information to the correct parties. This is the familar message: Oct 7 02:47:58 roswell /kernel: icmp-response bandwidth limit 115/100 pps and it looks like this in the security check output: roswell kernel log messages: >icmp-response bandwidth limit 115/100 pps And I'd like it to look something like: Oct 7 02:47:58 roswell /kernel: icmp-response bandwidth limit 115/100 pps from xxx.xxx.xxx.xxx And: roswell kernel log messages: >Oct 7 02:47:58 icmp-response bandwidth limit 115/100 pps from xxx.xxx.xxx.xxx I searched the mailing list and only found a reference to running 'tcpdump icmp' which I'd have to do during the limiting :/ Any ideas? -- Allen Cleveland allenc@mindsieve.com There is no try. Do, or do not do, but no try. -Yoda To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:47:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from inet.chip-web.com (c1003518-a.plstn1.sfba.home.com [24.1.82.47]) by hub.freebsd.org (Postfix) with SMTP id DDF661525E for ; Thu, 7 Oct 1999 13:47:30 -0700 (PDT) (envelope-from ludwigp@bigfoot.com) Received: (qmail 27658 invoked from network); 7 Oct 1999 20:47:29 -0000 Received: from toy.chip-web.com (HELO bigfoot.com) (@172.16.1.30) by inet.chip-web.com with SMTP; 7 Oct 1999 20:47:29 -0000 Message-ID: <37FD06E4.493CE762@bigfoot.com> Date: Thu, 07 Oct 1999 13:47:32 -0700 From: Ludwig Pummer X-Mailer: Mozilla 4.61 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Mark Ovens Cc: patl@phoenix.volant.org, Jack Winslade , Matthew Joseff , freebsd-questions@freebsd.org Subject: Re: Wierd Directory listing References: <199910071739.MAA16970@iwww.sitel.net> <19991007203833.D316@marder-1> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I prefer ls -i (look at inode number of funny file) find -inum {number} -delete As long as you get the inode number right, there's no chance of deleting any file but the file you want to delete. Mark Ovens wrote: > > On Thu, Oct 07, 1999 at 11:14:42AM -0700, patl@phoenix.volant.org wrote: > > On 7-Oct-99 at 10:42, Jack Winslade (jsw@iwww.sitel.net) wrote: > > > The trick I use to remove unremovable files is to specify a pattern that > > > matches only the bad one. I would first try: > > > > > > rm *7* > > > > Just a note for the paranoid: When I need to do something like > > this, I use the sequence: > > > > ls *7* > > > > rm *7* > > > > Another one is to use ``rm -i *'', but be careful about answering > ``y'' :) It worked for me. Curiously, ``rm -i'' displayed the > offending chars differently to ls(1) which, as in the example, just > uses the wildcard ``?'' Hmm. > > > And, while we are on the topic of deleting inconviently named > > files; the easiest way to delete a file that starts with a dash > > is to put './' in front. E.g., > > > > rm ./-r > > > > > > -Pat > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > -- > STATE-OF-THE-ART: Any computer you can't afford. > OBSOLETE: Any computer you own. > ________________________________________________________________ > FreeBSD - The Power To Serve http://www.freebsd.org > My Webpage http://ukug.uk.freebsd.org/~mark/ > mailto:mark@ukug.uk.freebsd.org http://www.radan.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- --Ludwig Pummer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:50:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from inet.chip-web.com (c1003518-a.plstn1.sfba.home.com [24.1.82.47]) by hub.freebsd.org (Postfix) with SMTP id 969A915382 for ; Thu, 7 Oct 1999 13:50:14 -0700 (PDT) (envelope-from ludwigp@bigfoot.com) Received: (qmail 27693 invoked from network); 7 Oct 1999 20:50:07 -0000 Received: from toy.chip-web.com (HELO bigfoot.com) (@172.16.1.30) by inet.chip-web.com with SMTP; 7 Oct 1999 20:50:07 -0000 Message-ID: <37FD0781.4DDDC23F@bigfoot.com> Date: Thu, 07 Oct 1999 13:50:09 -0700 From: Ludwig Pummer X-Mailer: Mozilla 4.61 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: Mark Ovens , patl@phoenix.volant.org, Jack Winslade , Matthew Joseff , freebsd-questions@freebsd.org Subject: Re: Wierd Directory listing (correction) References: <199910071739.MAA16970@iwww.sitel.net> <19991007203833.D316@marder-1> <37FD06E4.493CE762@bigfoot.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ludwig Pummer wrote: > find -inum {number} -delete find . -inum {number} -delete --Ludwig Pummer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 13:53:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id 17F5715376 for ; Thu, 7 Oct 1999 13:53:49 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 19883 invoked from network); 7 Oct 1999 20:51:27 -0000 Received: from userbl49.uk.uudial.com (HELO marder-1.) (62.188.144.156) by smtp.dial.pipex.com with SMTP; 7 Oct 1999 20:51:27 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id VAA01319; Thu, 7 Oct 1999 21:51:26 +0100 (BST) (envelope-from mark) Date: Thu, 7 Oct 1999 21:51:26 +0100 From: Mark Ovens To: Ludwig Pummer Cc: patl@phoenix.volant.org, Jack Winslade , Matthew Joseff , freebsd-questions@freebsd.org Subject: Re: Wierd Directory listing Message-ID: <19991007215126.E817@marder-1> References: <199910071739.MAA16970@iwww.sitel.net> <19991007203833.D316@marder-1> <37FD06E4.493CE762@bigfoot.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37FD06E4.493CE762@bigfoot.com> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 01:47:32PM -0700, Ludwig Pummer wrote: > I prefer > > ls -i > (look at inode number of funny file) > find -inum {number} -delete > > As long as you get the inode number right, there's no chance of deleting > any file but the file you want to delete. > Ah thanks. When I had one of these files to rm I recalled reading something about using the inode number to delete it but a search of the archives turned up nothing (I really don't trust that search engine). I'll make a note of this:) > Mark Ovens wrote: > > > > On Thu, Oct 07, 1999 at 11:14:42AM -0700, patl@phoenix.volant.org wrote: > > > On 7-Oct-99 at 10:42, Jack Winslade (jsw@iwww.sitel.net) wrote: > > > > The trick I use to remove unremovable files is to specify a pattern that > > > > matches only the bad one. I would first try: > > > > > > > > rm *7* > > > > > > Just a note for the paranoid: When I need to do something like > > > this, I use the sequence: > > > > > > ls *7* > > > > > > rm *7* > > > > > > > Another one is to use ``rm -i *'', but be careful about answering > > ``y'' :) It worked for me. Curiously, ``rm -i'' displayed the > > offending chars differently to ls(1) which, as in the example, just > > uses the wildcard ``?'' Hmm. > > > > > And, while we are on the topic of deleting inconviently named > > > files; the easiest way to delete a file that starts with a dash > > > is to put './' in front. E.g., > > > > > > rm ./-r > > > > > > > > > -Pat > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > -- > > STATE-OF-THE-ART: Any computer you can't afford. > > OBSOLETE: Any computer you own. > > ________________________________________________________________ > > FreeBSD - The Power To Serve http://www.freebsd.org > > My Webpage http://ukug.uk.freebsd.org/~mark/ > > mailto:mark@ukug.uk.freebsd.org http://www.radan.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > -- > > --Ludwig Pummer -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 14: 0:31 1999 Delivered-To: freebsd-questions@freebsd.org Received: from loki.intrepid.net (intrepid.net [204.71.127.3]) by hub.freebsd.org (Postfix) with ESMTP id 1C04F15368 for ; Thu, 7 Oct 1999 14:00:16 -0700 (PDT) (envelope-from akoontz@borg.com) Received: from [209.190.135.68] (pm3bky1-135-68.intrepid.net [209.190.135.68]) by loki.intrepid.net (8.8.5/8.8.5) with ESMTP id QAA00152 for ; Thu, 7 Oct 1999 16:59:16 -0400 X-Sender: akoontz@mail.borg.com Message-Id: Mime-Version: 1.0 Content-Type: text/enriched; charset="us-ascii" Date: Thu, 7 Oct 1999 16:59:13 -0400 To: FreeBSD Questions From: Alan Koontz Subject: first partition oddity during install procedure Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Where would I find documentation on the following install issue: Under the partition editor during install, the following numbers appear in the first partition: right,right,left,leftOffset Size End ... -63 126 62 ... There is a -63 instead of a 0 in the Offset column. There is no sector with a starting address of -63. Installing 2.2.5 release from CDROM onto second IDE drive which is a Seagate Medalist 1277 (st31277a) 1.2gb which resides on a PC with 16mb RAM. Alan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 14:19:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fepC.post.tele.dk (fepC.post.tele.dk [195.41.46.147]) by hub.freebsd.org (Postfix) with ESMTP id A0F27153AC for ; Thu, 7 Oct 1999 14:19:27 -0700 (PDT) (envelope-from per.dalum@mail.tele.dk) Received: from localhost.localdomain ([195.249.97.198]) by fepC.post.tele.dk (InterMail vM.4.01.02.00 201-229-116) with ESMTP id <19991007211730.UBE499.fepC.post.tele.dk@localhost.localdomain> for ; Thu, 7 Oct 1999 23:17:30 +0200 Received: (from root@localhost) by localhost.localdomain (8.9.3/8.9.3) id XAA07526 for freebsd-questions@freebsd.org; Thu, 7 Oct 1999 23:14:22 GMT (envelope-from root) Date: Thu, 7 Oct 1999 23:14:22 +0000 From: Per Dalum To: freebsd-questions@freebsd.org Subject: Printing on a windowd printer (Spec: Lexmark) Message-ID: <19991007231422.A7515@localhost.localdomain> Reply-To: per.dalum@mail.tele.dk Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all! From my company I have gotten a Lexmark Z51 printer, which uses the MS Windows printer protocl (whatever that is!) and I would offcause like to use it under FreeBSD (my only system :) There exists a gs driver for som Lexmark 7000 printer and it is easy to install under Linux (and it works for my printer), but to do this under FreeBSD exceedees my abillities :( So, are there any of you who have done it or are able to help my here? I have the sources and patches, but where do I go from there? But most of all, have anyone of you done a port? The driver is easy to find (Search on www.google.com with "Lexmark and Ghostscript" - I dont have the URL right now) Thanks! Per D. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 14:27:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Post-Office.UH.EDU (Post-Office.UH.EDU [129.7.1.20]) by hub.freebsd.org (Postfix) with ESMTP id AAF0215274 for ; Thu, 7 Oct 1999 14:27:31 -0700 (PDT) (envelope-from zdenko@CS.UH.EDU) Received: from CS.UH.EDU (zeus.cs.uh.edu [129.7.192.1]) by Post-Office.UH.EDU (PMDF V5.2-32 #40812) with SMTP id <0FJ900FDA4WGHN@Post-Office.UH.EDU> for freebsd-questions@FreeBSD.org; Thu, 7 Oct 1999 16:26:40 -0500 (CDT) Received: from blackbird.CS.UH.EDU by CS.UH.EDU (COSC/UH-zeus) id AA00807; Thu, 07 Oct 1999 16:26:40 -0500 (CDT) Received: by blackbird.CS.UH.EDU (4.1/UH-4.1) id AA01621; Thu, 07 Oct 1999 16:26:55 -0500 (CDT) Date: Thu, 07 Oct 1999 16:26:40 -0500 (CDT) From: Zdenko Tomasic Subject: Re: Sound Card pcm driver config problem In-reply-to: <199910061035.LAA12703@labinfo.iet.unipi.it> To: sarikaya@u-aizu.ac.jp Cc: luigi@iet.unipi.it, freebsd-questions@FreeBSD.org Reply-To: zdenko@CS.UH.EDU Message-id: <9910072126.AA00807@CS.UH.EDU> Content-transfer-encoding: 7BIT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I think the problem might be simpler. Use pcm0, not pcm1 in device line. > > controller pnp0 > > device pcm1 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr ^ make it 0 (pcm0) > > dmesg output: > > FreeBSD 3.2-RELEASE #19: Wed Oct 6 16:23:21 JST 1999 > sarikaya@dellcom5.u-aizu.ac.jp:/usr/project/V6/sys/compile/DELLCOM5 > > FreeBSD Kernel Configuration Utility - Version 1.2 > Type "help" for help or "visual" to go to the visual > configuration interface (requires MGA/VGA display or > serial terminal capable of displaying ANSI graphics). > config> pnp 1 0 os enable port0 0x534 port2 0x220 irq0 5 drq0 1 drq1 3 > config> quit > Probing for PnP devices: > CSN 1 Vendor ID: CSCd937 [0x37d9630e] Serial 0xffffffff Comp ID: @@@0000 [0x0000 > 0000] > mss_attach 2 at 0x530 irq 5 dma 1:3 flags 0x13 > pcm2 (CS423x/Yamaha/AD1816 sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 fl ^!!!! (you probably don't have that many sound cards) > ags 0x13 on isa To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 14:36:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from e4.ny.us.ibm.com (e4.ny.us.ibm.com [32.97.182.104]) by hub.freebsd.org (Postfix) with ESMTP id 75FE514CF2 for ; Thu, 7 Oct 1999 14:36:43 -0700 (PDT) (envelope-from ravikm@us.ibm.com) Received: from southrelay02.raleigh.ibm.com (southrelay02.raleigh.ibm.com [9.37.3.209]) by e4.ny.us.ibm.com (8.9.3/8.9.3) with ESMTP id RAA26784 for ; Thu, 7 Oct 1999 17:36:00 -0400 From: ravikm@us.ibm.com Received: from d54mta07.raleigh.ibm.com (d54mta07.raleigh.ibm.com [9.67.228.39]) by southrelay02.raleigh.ibm.com (8.8.8m2/NCO v2.05) with SMTP id RAA49114 for ; Thu, 7 Oct 1999 17:36:26 -0400 Received: by d54mta07.raleigh.ibm.com(Lotus SMTP MTA v4.6.5 (863.2 5-20-1999)) id 85256803.0076B2DF ; Thu, 7 Oct 1999 17:36:30 -0400 X-Lotus-FromDomain: IBMUS To: freebsd-questions@FreeBSD.ORG Message-ID: <85256803.0076AFC5.00@d54mta07.raleigh.ibm.com> Date: Thu, 7 Oct 1999 16:34:48 -0500 Subject: Loadable drivers in FreeBSD and NetBSD Mime-Version: 1.0 Content-type: text/plain; charset=us-ascii Content-Disposition: inline Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm not sure if my previous post has made it to the mail distribution for NetBSD questions. Hence, I'm resending this. Pardon me if you've seen this before. Thanks for any help. -- We are trying to see if we can convert the drivers in our NetBSD implementation into loadable drivers so that we can reduce the size of the kernel. I know that in Linux, we can achieve this by adding the entry and exit points - init_module() and cleanup_module(), and adding the MODULE flag to the compiles for the driver code. Then we should be able to add and remove them dynamically using the commands "insmod" and "rmmod". How does it work on the NetBSD and FreeBSD. Do we need to add the same routines in the drivers and compile them with the MODULE flag? Also, would the kernel then not have these drivers statically linked? Is the dynamic loadability feature supported in the NetBSD 1.4/1.5 kernels? Can these drivers be hot-loaded at runtime, or do they need to be explicitly loaded using some commands such as "insmod" or so. Your help is very much appreciated. Thanks. Ravi Mandava To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 14:57:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 98562152DC for ; Thu, 7 Oct 1999 14:57:00 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 15254 invoked from network); 7 Oct 1999 20:58:40 -0000 Received: from unknown (HELO tim) (192.168.1.6) by cache.ima-info.ro with SMTP; 7 Oct 1999 20:58:40 -0000 From: "Ion Mihai Tetcu" To: Ford Prefect , freebsd-questions@freebsd.org Date: Fri, 8 Oct 1999 00:54:58 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Thanks (was: [Q] FreeBSD on dual PII) Reply-To: itetcu@go.ro Cc: freebsd-questions@freebsd.org In-reply-to: <3.0.3.32.19991006202750.0169dd78@pop.interaccess.com> References: <19991006231445.569A714EA4@hub.freebsd.org> X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991007215715.98562152DC@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks for the hint, i should have look better, i did only look in the kernel and LINT from a 2.x computer. Ionut In 6 Oct 99, la 20:27, Ford Prefect a scris: > >From the FAQ: > SMP is supported in 3.0-STABLE and later releases only. > > But you will need to rebuild the kernel. The info you need is as follows. > (From the GENERIC kernel, uncomment as needed) > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > # Optionally these may need tweaked, (defaults shown): > #options NCPU=2 # number of CPUs > #options NBUS=4 # number of busses > #options NAPIC=1 # number of IO APICs > #options NINTR=24 # number of INTs > > See: > http://lxr.linux.no/freebsd/source/i386/conf/GENERIC#L52 > or > http://lxr.linux.no/freebsd/source/i386/conf/LINT#L87 > > or just /sys/i386/conf/LINT and /sys/i386/conf/GENERIC > > -Steve > > At 02:11 AM 10/7/99 +0200, you wrote: > >Hi, > > > >Does FreeBSD run on a Dual PII system ? > >If yes, do I have to rebuild the kernel (and how exactly, as i don`t > >remember seeing in LINT anything about that). > > > >Thanks, > >Ionut > >Ion Mihai Tetcu > >itetcu@go.ro > >------------------------------------------------------------------------- > >-- > ---- > >Get a free e-mail and 10M webspace at http://www.home.ro/ > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > *=====================================================* > \ Ford Prefect Ahead of my time. \ > \ fordp@guide.chi.il.us but only by a week. \ > \ homepage.interaccess.com/~fordp \ > \ \ > \ ((In esperanto where available)) \ > *=====================================================* > Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 14:57:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 5D7F815318 for ; Thu, 7 Oct 1999 14:57:08 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 15254 invoked from network); 7 Oct 1999 20:58:40 -0000 Received: from unknown (HELO tim) (192.168.1.6) by cache.ima-info.ro with SMTP; 7 Oct 1999 20:58:40 -0000 From: "Ion Mihai Tetcu" To: Ford Prefect , freebsd-questions@freebsd.org Date: Fri, 8 Oct 1999 00:54:58 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Thanks (was: [Q] FreeBSD on dual PII) Reply-To: itetcu@go.ro Cc: freebsd-questions@freebsd.org In-reply-to: <3.0.3.32.19991006202750.0169dd78@pop.interaccess.com> References: <19991006231445.569A714EA4@hub.freebsd.org> X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991007215716.5D7F815318@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks for the hint, i should have look better, i did only look in the kernel and LINT from a 2.x computer. Ionut In 6 Oct 99, la 20:27, Ford Prefect a scris: > >From the FAQ: > SMP is supported in 3.0-STABLE and later releases only. > > But you will need to rebuild the kernel. The info you need is as follows. > (From the GENERIC kernel, uncomment as needed) > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > # Optionally these may need tweaked, (defaults shown): > #options NCPU=2 # number of CPUs > #options NBUS=4 # number of busses > #options NAPIC=1 # number of IO APICs > #options NINTR=24 # number of INTs > > See: > http://lxr.linux.no/freebsd/source/i386/conf/GENERIC#L52 > or > http://lxr.linux.no/freebsd/source/i386/conf/LINT#L87 > > or just /sys/i386/conf/LINT and /sys/i386/conf/GENERIC > > -Steve > > At 02:11 AM 10/7/99 +0200, you wrote: > >Hi, > > > >Does FreeBSD run on a Dual PII system ? > >If yes, do I have to rebuild the kernel (and how exactly, as i don`t > >remember seeing in LINT anything about that). > > > >Thanks, > >Ionut > >Ion Mihai Tetcu > >itetcu@go.ro > >------------------------------------------------------------------------- > >-- > ---- > >Get a free e-mail and 10M webspace at http://www.home.ro/ > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > *=====================================================* > \ Ford Prefect Ahead of my time. \ > \ fordp@guide.chi.il.us but only by a week. \ > \ homepage.interaccess.com/~fordp \ > \ \ > \ ((In esperanto where available)) \ > *=====================================================* > Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 15:40:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp1.a2000.nl (farida.a2000.nl [62.108.1.19]) by hub.freebsd.org (Postfix) with ESMTP id 56C3215114 for ; Thu, 7 Oct 1999 15:40:36 -0700 (PDT) (envelope-from alexlh@funk.org) Received: from node1484.a2000.nl ([62.108.20.132] helo=funk.org) by smtp1.a2000.nl with esmtp (Exim 2.02 #4) id 11ZMCy-0003Nm-00; Fri, 8 Oct 1999 00:40:20 +0200 Message-ID: <37FD2154.8A3C1EC7@funk.org> Date: Fri, 08 Oct 1999 00:40:20 +0200 From: Alex Le Heux X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.5 i386) X-Accept-Language: en MIME-Version: 1.0 To: "TFC WLAN 97/98 - IST - ext.2269 (8418269)" , freebsd-questions@freebsd.org Subject: Re: Inactive memory References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "TFC WLAN 97/98 - IST - ext.2269 (8418269)" wrote: [snip] > Sometimes it takes more than 10 seconds for Pine to open/close > a big mailbox (more than 1000 messages), and during that time > the systems respondes slowly... [snip] Years ago I had the same problem: large mailboxes and slow pine I installed mutt, and have never looked back: Load mailboxes with 3000+ messages in a few seconds, and I have yet to discover something I cannot customise :) Try it, when you get used to it, you'll love it :) Alex -- +--------------------------------+-------------------+ | SMTP: | E-Gold: 101979 | | ICBM: N52 22.64'6 E4 51.54'1 | PGP: 0x1d512a3f | +--------------------------------+-------------------+ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 15:40:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from glitnir.cfar.umd.edu (glitnir.cfar.umd.edu [128.8.132.40]) by hub.freebsd.org (Postfix) with ESMTP id E2B7915368 for ; Thu, 7 Oct 1999 15:40:42 -0700 (PDT) (envelope-from arensb@cfar.umd.edu) Received: from glitnir.cfar.umd.edu (localhost [127.0.0.1]) by glitnir.cfar.umd.edu (8.9.3/8.9.1) with ESMTP id SAA25331 for ; Thu, 7 Oct 1999 18:41:44 -0400 (EDT) Message-Id: <199910072241.SAA25331@glitnir.cfar.umd.edu> To: questions@freebsd.org Subject: Help with ATAPI CD-RW drive Date: Thu, 07 Oct 1999 18:41:43 -0400 From: Andrew Arensburger Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have an HP 8110i CD burner that I'd like to use under FreeBSD. I've been trying to make a CD using the example script in wormcontrol(8), with some inspiration from /usr/share/examples/worm/*. The drive seems to be recognized just fine at boot time[1]. "wormcontrol -f /dev/racd0c " seems to work just dandy. "wormcontrol -f /dev/racd0c blank" with a CD-RW disk in the drive makes the drive's lights blink for a few minutes, which makes it look as if this drive is supported. However, I can't write to the drive: "dd of=/dev/racd0c obs=20k" (or anything else that writes to /dev/racd0c) fails, and this message gets appended to 'dmesg': acd0: rezero failed Yes, /dev/*acd0* is writable; yes, I'm doing this as root; yes, I've made sure that there's a blank CD-R or CD-RW disk in the drive. Any hints? For completeness, my system is: FreeBSD baa.ooblick.com 3.1-RELEASE FreeBSD 3.1-RELEASE #4: Sun Sep 26 04:15:22 EDT 1999 arensb@baa.ooblick.com:/usr/src/sys/compile/NEW i386 The script I'm using to burn the CD is at [2], and its output is at [3] ----- Footnotes: [1] From dmesg: wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordis acd0: drive speed 4134KB/sec, 1024KB cache acd0: supported read types: CD-R, CD-RW, CD-DA, packet track acd0: supported write types: CD-R, CD-RW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked [2]: 'burncd' script: #!/bin/sh -x PATH=/bin:/usr/sbin:/usr/local/bin WORM=/dev/racd0c DUMMY="dummy" # Comment this out to burn for real wormcontrol -f "$WORM" prepdisk single $DUMMY wormcontrol -f "$WORM" track data rtprio 5 team -v 1m 5 < /tmp/dummy.iso | rtprio 5 dd of="$WORM" obs=20k wormcontrol -f "$WORM" fixate 1 [3]: Output from 'burncd': [164]baa(root)> /tmp/burncd + PATH=/bin:/usr/sbin:/usr/local/bin + WORM=/dev/racd0c + DUMMY=dummy + wormcontrol -f /dev/racd0c prepdisk single dummy + wormcontrol -f /dev/racd0c track data + rtprio 5 team -v 1m 5 + rtprio 5 dd of=/dev/racd0c obs=20k dd: /dev/racd0c: Input/output error team: guy pid 19922: error on upstream receive team: stop remaining 4 guys team: guy pid 19923: guy was aborted team: guy pid 19924: guy was aborted team: guy pid 19925: guy was aborted + wormcontrol -f /dev/racd0c fixate 1 wormcontrol: ioctl(WORMIOFIXATION): Invalid argument -- Andrew Arensburger, Systems guy Center for Automation Research arensb@cfar.umd.edu University of Maryland I am Dot of Borg. Isn't assimilation CUTE? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 15:46:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.webct.com (mail.webct.com [209.87.17.10]) by hub.freebsd.org (Postfix) with ESMTP id 129AC152F7 for ; Thu, 7 Oct 1999 15:46:31 -0700 (PDT) (envelope-from dfoo@ca.webct.com) Received: from ca.webct.com (ws74.webct.com [209.87.17.104]) by mail.webct.com (8.9.3/8.9.3) with ESMTP id PAA31510 for ; Thu, 7 Oct 1999 15:45:30 -0700 (PDT) Message-ID: <37FD228A.3868D228@ca.webct.com> Date: Thu, 07 Oct 1999 15:45:30 -0700 From: Darren Foo Reply-To: dfoo@webct.com Organization: ULT Canada X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: Network printing with apsfilter (was HP Laserjet 1100) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks to those who replied to my post about printing. I finally got the printer filter working with apsfilter. But now I'm trying to get network printing working. The apsfilter setup said that freebsd supported network printing with the apsfilter. On the printer machine, I added the remote machine to hosts.lpd. And on the remote machine I added: lp|lj|ps|remote Laserjet 1100 printer:\ :sh:\ :rm=ws74:sd=/var/spool/lpd/rlp:lf=/var/log/lpd-errs: I used lp since the remote machines don't have their own printers. Anyhow, when I try to print it gets into queue but says: lpd: Your host does not have line printer access. Anyone have this working? -- Darren Foo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 15:47:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.structured.net (mail.structured.net [206.58.0.25]) by hub.freebsd.org (Postfix) with ESMTP id 33BC51538C for ; Thu, 7 Oct 1999 15:47:03 -0700 (PDT) (envelope-from beowulf@sns-access.com) Received: from pickwick (pickwick.sns-access.com [206.58.0.33]) by mail.structured.net (8.8.8/8.8.8) with SMTP id PAA02779 for ; Thu, 7 Oct 1999 15:46:51 -0700 (PDT) Date: Thu, 7 Oct 1999 15:46:48 -0700 (PDT) From: Chad Monteith X-Sender: beowulf@pickwick To: freebsd-questions@freebsd.org Subject: THree NIC's -> filter/firewall/router Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, If somebody has done this could you contact me? I am trying to assess its feasability. We want to use one FreeBSD system with three NIC's in it running at 100 MB/s (all three to a different switch). The machine will need to router between the three interfaces (it will server as a gateway/router), filter packets ala a firewall, and all www/ftp/SSL traffic will need to be process by our Squid/SmartFilter system, i.e. block that traffic unless its from itself. Also have you had performance problems? Three 100 MB/s NIC's running at full speed will probably kill the PCI bus... Thanks for your help. Chad To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 16:29:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from tiger.fhsu.edu (tiger.fhsu.edu [198.248.101.178]) by hub.freebsd.org (Postfix) with ESMTP id 7370615368 for ; Thu, 7 Oct 1999 16:29:07 -0700 (PDT) (envelope-from afleming@tiger.fhsu.edu) Subject: KDE Install on 3.1 To: questions@freebsd.org Cc: X-Mailer: Lotus Notes Release 5.0.1 July 16, 1999 Message-ID: From: afleming@tiger.fhsu.edu Date: Thu, 7 Oct 1999 18:29:06 -0500 X-Priority: 3 (Normal) X-MIMETrack: Serialize by Router on NotesHub/FHSU(Release 5.0.1a|August 17, 1999) at 10/07/99 06:29:07 PM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a system that is currently running FreeBSD 3.1, I plan to upgrade it to 3.3, but it is in production, so I will not be about to preform the upgrade for another month. I want to Install KDE on this system. I have had trouble getting part of KDE to compile when I run a make from the latest port. Can I use the 3.3 CD to install the distribution of KDE that comes with it, or will that cause problems, since I haven't upgraded to 3.3 yet. Thanks Andrew Fleming Fort Hays State University Computing Center Phone: (785) 628-5688 E-mail: afleming@fhsu.edu To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 17: 3:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from glitnir.cfar.umd.edu (glitnir.cfar.umd.edu [128.8.132.40]) by hub.freebsd.org (Postfix) with ESMTP id 45F3A14D56 for ; Thu, 7 Oct 1999 17:03:46 -0700 (PDT) (envelope-from arensb@cfar.umd.edu) Received: from glitnir.cfar.umd.edu (localhost [127.0.0.1]) by glitnir.cfar.umd.edu (8.9.3/8.9.1) with ESMTP id UAA26287 for ; Thu, 7 Oct 1999 20:04:48 -0400 (EDT) Message-Id: <199910080004.UAA26287@glitnir.cfar.umd.edu> To: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD on second master disk In-reply-to: Your message of "Thu, 07 Oct 1999 22:03:33 +0200." <48537.939326613@axl.noc.iafrica.com> Date: Thu, 07 Oct 1999 20:04:48 -0400 From: Andrew Arensburger Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 22:03:33 +0200, Sheldon Hearn wrote: > This stuff is documented in the loader(8) manpage if you have access to > it. Very peripherally: I think the single most compelling reason to get "The Complete FreeBSD" is so you'll have all those man pages that you can't get to when your machine won't boot. -- Andrew Arensburger, Systems guy Center for Automation Research arensb@cfar.umd.edu University of Maryland I'm too sexy for meiosis. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 17:23:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from uberhacker.org (uberhacker.org [207.229.158.98]) by hub.freebsd.org (Postfix) with SMTP id 772C415099 for ; Thu, 7 Oct 1999 17:23:15 -0700 (PDT) (envelope-from pds@uberhacker.org) Received: (qmail 87592 invoked by uid 1000); 8 Oct 1999 00:21:55 -0000 Date: Thu, 7 Oct 1999 19:21:55 -0500 From: "Paul D . Schmidt" To: freebsd-questions@freebsd.org Subject: vinum volume corrupted Message-ID: <19991007192155.A81842@uberhacker.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, my vinum volume git corrupted somehow, but I don't seem to be able to get it back.... can't fsck it: # fsck /dev/vinum/rbigdrive ** /dev/vinum/rbigdrive CANNOT READ: BLK 59113504 CONTINUE? [yn] y THE FOLLOWING DISK SECTORS COULD NOT BE READ: 59113504, 59113505, 59113506, 59113507, /dev/vinum/rbigdrive: NOT LABELED AS A BSD FILE SYSTEM (unused) I always get this error when I boot up too: vinum: loaded Can't open history file /var/tmp/vinum_history: No such file or directory (2) Also, my system takes a really long time to halt, too...could it be because vinum isn't dying properly? Should there be a vinum stop in rc.shutdown or something? I believe I read how to set this up in the freebsd diary, but it didn't say anything about how to stop vinum, just how to start it.... Here is the output of vinum list: Configuration summary Drives: 1 (4 configured) Volumes: 1 (4 configured) Plexes: 1 (8 configured) Subdisks: 2 (16 configured) D a State: up Device /dev/wd1e Avail: 12409/12409 MB (99%) D b State: referenced Device Avail: 0/0 MB V bigdrive State: up Plexes: 1 Size: 28 GB P bigdrive.p0 C State: corrupt Subdisks: 2 Size: 28 GB S bigdrive.p0.s0 State: up PO: 0 B Size: 12 GB S bigdrive.p0.s1 State: crashed PO: 12 GB Size: 16 GB Thanks, Paul -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Paul D. Schmidt UNIX Systems Programmer FreeBSD Advocate "Trust the computer industry to shorten 'Year 2000' to 'Y2K.' It was this kind of thinking that caused the problem in the first place." -Anonymous =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 17:55: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from granite.sentex.net (granite.sentex.ca [199.212.134.1]) by hub.freebsd.org (Postfix) with ESMTP id 40B4514E64 for ; Thu, 7 Oct 1999 17:54:58 -0700 (PDT) (envelope-from mike@sentex.net) Received: from ospf-mdt.sentex.net (ospf-mdt.sentex.net [205.211.164.81]) by granite.sentex.net (8.8.8/8.6.9) with SMTP id UAA10167; Thu, 7 Oct 1999 20:54:55 -0400 (EDT) From: mike@sentex.net (Mike Tancsa) To: didds@freenet.uk.com (Ian Diddams) Cc: questions@freebsd.org Subject: Re: mrt (as in mrtd, not mrtg) Date: Fri, 08 Oct 1999 00:54:55 GMT Message-ID: <37fd3f8c.78111318@mail.sentex.net> References: In-Reply-To: X-Mailer: Forte Agent .99e/32.227 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 7 Oct 1999 07:59:04 -0400, in sentex.lists.freebsd.questions you wrote: >Anybody have any comments about running MRT (probably version 1.6) on >FreeBSD 3.2 ? > >Has anybody made it work? BGP? I played with it for a while. It was nice to use it to simulate with, but for eBGP, I am with gated for now. The program seemed decent enough, but the focus of the project is more on cutting edge protocols and routing simulation rather than a stable feature set. Zebra in the near to medium future might be the way to go (http://www.zebra.org) For now, I run gated 3.5.11 on my two border routers, and it has done us well so far. There is a patch posted to the gated list that you will want to allow you to do AS path prepending which is necessary if you want to do any sort of inbound traffic manipulation. Also, if you want to take full views, you will need to run 3.3 RELEASE or better as the patches to fix the 2^16 routes per interface limitation is not in 3.2R ---Mike Mike Tancsa (mdtancsa@sentex.net) Sentex Communications Corp, Waterloo, Ontario, Canada "Given enough time, 100 monkeys on 100 routers could setup a national IP network." (KDW2) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 18:19:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 3C50614E91 for ; Thu, 7 Oct 1999 18:19:35 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id VAA19665; Thu, 7 Oct 1999 21:22:17 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910080122.VAA19665@cc942873-a.ewndsr1.nj.home.com> Subject: Re: Wierd Directory listing In-Reply-To: from "patl@phoenix.volant.org" at "Oct 7, 1999 11:14:42 am" To: patl@phoenix.volant.org Date: Thu, 7 Oct 1999 21:22:17 -0400 (EDT) Cc: jsw@iwww.sitel.net (Jack Winslade), mjoseff@retribution.net (Matthew Joseff), freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG patl@phoenix.volant.org wrote, > On 7-Oct-99 at 10:42, Jack Winslade (jsw@iwww.sitel.net) wrote: > > The trick I use to remove unremovable files is to specify a pattern that > > matches only the bad one. I would first try: > > > > rm *7* [snip] > And, while we are on the topic of deleting inconviently named > files; the easiest way to delete a file that starts with a dash > is to put './' in front. E.g., > > rm ./-r I always felt, % rm -- -r Was easiest. Always good to remember the use of '--' for times when a '-r' kind of argument is not a file name and the previous trick does not work. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 18:20:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from granite.sentex.net (granite.sentex.ca [199.212.134.1]) by hub.freebsd.org (Postfix) with ESMTP id 8DD0314E91 for ; Thu, 7 Oct 1999 18:20:07 -0700 (PDT) (envelope-from mike@sentex.net) Received: from ospf-mdt.sentex.net (ospf-mdt.sentex.net [205.211.164.81]) by granite.sentex.net (8.8.8/8.6.9) with SMTP id VAA15963; Thu, 7 Oct 1999 21:20:03 -0400 (EDT) From: mike@sentex.net (Mike Tancsa) To: beowulf@sns-access.com (Chad Monteith) Cc: questions@freebsd.org Subject: Re: THree NIC's -> filter/firewall/router Date: Fri, 08 Oct 1999 01:20:03 GMT Message-ID: <37fd4450.79331512@mail.sentex.net> References: In-Reply-To: X-Mailer: Forte Agent .99e/32.227 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 7 Oct 1999 18:47:52 -0400, in sentex.lists.freebsd.questions you wrote: >Hello, > If somebody has done this could you contact me? I am trying to >assess its feasability. > We want to use one FreeBSD system with three NIC's in it running >at 100 MB/s (all three to a different switch). The machine will need to >router between the three interfaces (it will server as a gateway/router), >filter >packets ala a firewall, and all www/ftp/SSL traffic will need to be >process by our Squid/SmartFilter system, i.e. block that traffic unless >its from itself. > Also have you had performance problems? Three 100 MB/s NIC's >running at full speed will probably kill the PCI bus... Thats three at 100 Mbits, not Bytes right ? I have a router with 4 Intel fxp cards in it, 3 in 100Mb full duplex, one in 10BaseT. I have seen it spike upwards of about 10Mb (which is the maximum coming into it from a cross over cable to a Cisco 4700), have 4 going out, 1 and 1 on another, and 1Mb on the third, and 14 going out the other end, as well as running gated and 22 ipfw rules to process. It does us well. Remember, cdrom.com saturates a single 100Mb connection. ---Mike Mike Tancsa (mdtancsa@sentex.net) Sentex Communications Corp, Waterloo, Ontario, Canada "Given enough time, 100 monkeys on 100 routers could setup a national IP network." (KDW2) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 18:30:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-31.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.31]) by hub.freebsd.org (Postfix) with ESMTP id 0E756151E2 for ; Thu, 7 Oct 1999 18:30:04 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id BAA03138; Fri, 8 Oct 1999 01:06:48 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id SAA00530; Thu, 7 Oct 1999 18:11:25 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910071711.SAA00530@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Sheldon Hearn Cc: liang@ems.guangzhou.gd.cn, freebsd-questions@FreeBSD.ORG Subject: Re: Does 3.3-release support CallBack? In-reply-to: Your message of "Wed, 06 Oct 1999 11:44:13 +0200." <28358.939203053@axl.noc.iafrica.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Thu, 07 Oct 1999 18:11:25 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > And, When I install 3.3-release, I want to use Callback too, is it > > supported too? > > Out of the box, I doubt that you'll be able to _install_ using ppp > callback. Once you've got FreeBSD installed, the story changes. :-) Indeed. Getty(8) ain't built into the /stand stuff. However, you could be smart (?)... remember, you've got ppp(8) :-) There's nothing stopping you setting up callback (with a reasonable DELAY), doing the initial connection, then going into ``term'' mode and waiting for the RING. A quick ATA followed by a ~p and you should be in business ! I've never tried it, but the theory's sound. > Ciao, > Sheldon. -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 18:48:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dportales.cl (lider.dportales.cl [200.28.85.1]) by hub.freebsd.org (Postfix) with ESMTP id C64671510F for ; Thu, 7 Oct 1999 18:48:03 -0700 (PDT) (envelope-from altamirano@dportales.cl) Received: from maltamirano.dportales.cl (ntserver.dportales.cl [200.28.85.3]) by dportales.cl (8.8.7/8.8.7) with SMTP id VAA02867 for ; Thu, 7 Oct 1999 21:48:09 -0400 From: Marcos Altamirano Organization: Org. Educacional Diego Portales To: freebsd-questions@FreeBSD.ORG Subject: Desarrollo bajo Linux Date: Thu, 7 Oct 1999 21:44:22 -0400 X-Mailer: KMail [version 1.0.20] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <99100721471500.01637@maltamirano.dportales.cl> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Nuestra organización está optando por desarrollar todos sus sistemas bajo el sistema operativo Linux. La consulta es cual es la herramienta de desarrollo de sistemas más apropiada considerando que nuestro grupo programadores tiene experiencia en Visual basic 5.0. Esperendo alguna orientación Atte, Marcos Altamirano To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 18:52:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.netville.com.br (ns2.netville.com.br [200.215.101.2]) by hub.freebsd.org (Postfix) with ESMTP id C084E152FE for ; Thu, 7 Oct 1999 18:52:51 -0700 (PDT) (envelope-from sayao@netville.com.br) Received: from Sayao (r109p50.ppp.netville.com.br [200.193.91.70]) by mail.netville.com.br (8.9.3/8.9.3) with SMTP id VAA09495 for ; Thu, 7 Oct 1999 21:59:12 -0300 Message-ID: <000901bf10cc$af3c4a40$11ddfea9@Sayao> From: "Thiago Sayao" To: Subject: libraries Date: Thu, 7 Oct 1999 11:01:42 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG please, i'm having problems with the shared libs, the configuration scrips are not finding the jpeg, png, gif ... libs, but they are there! and it is in the ldconfig_path. i don't know if this is a bug in the ldconfig or something like that, can you explain it to me and tell me what i'm doing wrong.. if i am.. ? the distribution is 3.2-RELEASE thaks, Thiago Sayao To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 19: 1:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id D787D153BE for ; Thu, 7 Oct 1999 19:01:34 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id LAA95995; Fri, 8 Oct 1999 11:28:40 +0930 (CST) Date: Fri, 8 Oct 1999 11:28:40 +0930 From: Greg Lehey To: "Paul D . Schmidt" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: vinum volume corrupted Message-ID: <19991008112839.V78191@freebie.lemis.com> References: <19991007192155.A81842@uberhacker.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991007192155.A81842@uberhacker.org> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thursday, 7 October 1999 at 19:21:55 -0500, Paul D . Schmidt wrote: > Hi, my vinum volume git corrupted somehow, but I don't seem to be able to > get it back.... > > can't fsck it: > # fsck /dev/vinum/rbigdrive > ** /dev/vinum/rbigdrive > > CANNOT READ: BLK 59113504 > CONTINUE? [yn] y > > THE FOLLOWING DISK SECTORS COULD NOT BE READ: 59113504, 59113505, 59113506, 59113507, > /dev/vinum/rbigdrive: NOT LABELED AS A BSD FILE SYSTEM (unused) > > > I always get this error when I boot up too: > vinum: loaded > Can't open history file /var/tmp/vinum_history: No such file or directory (2) > > Also, my system takes a really long time to halt, too...could it be because > vinum isn't dying properly? Should there be a vinum stop in rc.shutdown > or something? No. I don't know why your system takes a long time, but I'm pretty sure it isn't because of Vinum. > I believe I read how to set this up in the freebsd diary, but it > didn't say anything about how to stop vinum, just how to start > it.... Well, the FreeBSD diary isn't exactly the definitive description of Vinum. That's what man pages are for. To stop vinum, you enter the command (wait for it) 'vinum stop'. But you don't need to do it before a reboot. > Here is the output of vinum list: > Configuration summary > > Drives: 1 (4 configured) > Volumes: 1 (4 configured) > Plexes: 1 (8 configured) > Subdisks: 2 (16 configured) > > D a State: up Device /dev/wd1e Avail: 12409/12409 MB (99%) > D b State: referenced Device Avail: 0/0 MB > > V bigdrive State: up Plexes: 1 Size: 28 GB > > P bigdrive.p0 C State: corrupt Subdisks: 2 Size: 28 GB > > S bigdrive.p0.s0 State: up PO: 0 B Size: 12 GB > S bigdrive.p0.s1 State: crashed PO: 12 GB Size: 16 GB From vinum(4): crashed A subdisk entry which has been created completely. All fields are correct, the disk has been updated, and the data was valid, but since then the drive has gone down. No attempt has been made to write to the subdisk since the crash, so the data is valid. The problem you have here is that your drive b isn't being found on the system. Where is it located? Are the contents still valid? Take a look at vinum(4) and look at the on-disk configuration. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 19:33:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 8979714F94 for ; Thu, 7 Oct 1999 19:33:54 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) for freebsd-questions@freebsd.org id 11ZPqo-000DAZ-00; Fri, 8 Oct 1999 03:33:42 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id DAA50423 for ; Fri, 8 Oct 1999 03:33:41 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Fri, 8 Oct 1999 03:33:41 +0100 (BST) From: J McKitrick To: freebsd-questions@freebsd.org Subject: mouse lockup in X Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Sometimes when i start FBSD, the mouse won't work in windowmaker. Other times it is fine. Starting X again or logging out and back in don't work. Only a reboot cures it. ANy ideas? FBSD 3.2 Toshiba Satellite laptop with PS/2 mouse -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20: 3:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lh2.rdc1.bc.home.com (ha2.rdc1.bc.wave.home.com [24.2.10.67]) by hub.freebsd.org (Postfix) with ESMTP id C122314C39 for ; Thu, 7 Oct 1999 20:03:55 -0700 (PDT) (envelope-from whitehat@home.com) Received: from home.com ([24.113.65.122]) by lh2.rdc1.bc.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991008030355.RMWS2095.lh2.rdc1.bc.home.com@home.com> for ; Thu, 7 Oct 1999 20:03:55 -0700 Message-ID: <37FD5D3C.68EA3FAB@home.com> Date: Thu, 07 Oct 1999 19:55:56 -0700 From: whitehat@home.com Organization: @Home Network Member X-Mailer: Mozilla 4.05 [en]C-AtHome0404 (Win95; U) MIME-Version: 1.0 To: questions@freebsd.org Subject: success...and failure Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At last...with you guy's helping emails I was able to successfully install FreeBSD 3.2, and with some kernel hacking, and I/O altering, I got my ethernet card working. One problem though...after I boot up and log in as root, I type startx and this nasty error comes up: " execve failed for /usr/X11R6/bin/x(errno2)" its a little weird...my mouse shows up on the screen, I can move it around and all that, however I'm still in console and I can execute commands. Its as if I'm halfway in X and halfway in console. Whats going on? I ran the non-graphical Xfree86 config...everything seemed to go ok execept for my video card selection. I have no idea what my video card is and what memory it has! So I just guessed. Is there any way to re-configure it without re-installing FreeBSD? I need help. One final thing...During installation, I chose to install KDE 1.1.1, but it couldnt find "Mesa". I have the 4 CD set, so mabye KDE is on one of the other CD's? How would I install/view the software while logged in FreeBSD? I would appreciate any response/flames/confusion you can offer me...thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:15:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id 50F8F14C39 for ; Thu, 7 Oct 1999 20:15:53 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id XAA04535; Thu, 7 Oct 1999 23:11:49 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37FD60F5.FA8C925B@big-blue.net> Date: Thu, 07 Oct 1999 23:11:49 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: whitehat@home.com Cc: questions@FreeBSD.ORG Subject: Re: success...and failure References: <37FD5D3C.68EA3FAB@home.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG whitehat@home.com wrote: > At last...with you guy's helping emails I was able to successfully > install FreeBSD 3.2, and with some kernel hacking, and I/O altering, I > got my ethernet card working. One problem though...after I boot up and > log in as root, I type startx and this nasty error comes up: > > " execve failed for /usr/X11R6/bin/x(errno2)" > > its a little weird...my mouse shows up on the screen, I can move it > around and all that, however I'm still in console and I can execute > commands. Its as if I'm halfway in X and halfway in console. Whats > going on? I ran the non-graphical Xfree86 config...everything seemed to > go ok execept for my video card selection. I have no idea what my video > card is and what memory it has! So I just guessed. Is there any way to > re-configure it without re-installing FreeBSD? I need help. One final > thing...During installation, I chose to install KDE 1.1.1, but it > couldnt find "Mesa". I have the 4 CD set, so mabye KDE is on one of the > other CD's? How would I install/view the software while logged in > FreeBSD? I would appreciate any response/flames/confusion you can offer > me...thanks > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message start /usr/X11R6/bin/XF86Setup to configure X in graphical mode what kind of card do you have? at boot time at least you can read what card do you have ;-)) have fun alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:21: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from www.keycomp.net (www.keycomp.net [207.44.1.33]) by hub.freebsd.org (Postfix) with ESMTP id CD9D814A29; Thu, 7 Oct 1999 20:20:57 -0700 (PDT) (envelope-from billieakay@yahoo.com) Received: from bopper (kc-rmt03.keycomp.net [207.44.1.5]) by www.keycomp.net (8.8.5/SCO5) with SMTP id XAA21526; Thu, 7 Oct 1999 23:26:45 -0400 (EDT) Message-ID: <00db01bf113c$01933dc0$01010101@bopper> From: "Bill A. K." To: , "FreeBSD Questions" Subject: My status with upgrade from 3.2 to 4.0 Date: Thu, 7 Oct 1999 23:19:20 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I just wanted to let you know that I was finally able to upgrade to 4.0-current from 3.2-release. I cvsuped the 4.0 code, i compiled the 4.0 config command, i compiled the 4.0 kernel, installed the kernel, rebooted, and build and installed the world and it worked. Then i just made my custom kernel, and did some other stuff. I have a few questions though, my Voodoo Banshee makes the console display screw up wheneven i go into X (my version is 3.3.5), and then exit X. (BTW this also did this on 3.2-release) Anybody else see this? Another thing was syslogd was looking for /var/log/security and can't find it, how can i fix this? Thanks Bill billieakay@yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:29:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail-out.visi.com (kauket.visi.com [209.98.98.22]) by hub.freebsd.org (Postfix) with ESMTP id DBFC114A29 for ; Thu, 7 Oct 1999 20:29:20 -0700 (PDT) (envelope-from jstock@visi.com) Received: from isis.visi.com (isis.visi.com [209.98.98.8]) by mail-out.visi.com (Postfix) with ESMTP id EE5CC37C7 for ; Thu, 7 Oct 1999 22:28:50 -0500 (CDT) Received: from localhost (jstock@localhost) by isis.visi.com (8.8.8/8.8.8) with ESMTP id WAA26671 for ; Thu, 7 Oct 1999 22:28:50 -0500 (CDT) X-Authentication-Warning: isis.visi.com: jstock owned process doing -bs Date: Thu, 7 Oct 1999 22:28:50 -0500 (CDT) From: "Jeremy L. Stock" To: freebsd-questions@FreeBSD.ORG Subject: cdrecord question Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I recently installed a Traxdata SCSI CDRW drive My SCSI controller is an Adeptec AVA 2906K both it and the CDRW get detected ok. From dmesg: ahc0: rev 0x03 int a irq 5 on pci0.10.0 ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs cd0 at ahc0 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present cd9660: Joliet Extension However, when I run cdrecord -scanbus it returns cdrecord: No such file or directory. Cannot open SCSI driver. Any ideas as to what's wrong would be appreciated. -- Jeremy L. Stock ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:31:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 6E06B14FD2 for ; Thu, 7 Oct 1999 20:31:23 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id XAA19920; Thu, 7 Oct 1999 23:34:15 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910080334.XAA19920@cc942873-a.ewndsr1.nj.home.com> Subject: Re: vinum volume corrupted In-Reply-To: <19991008112839.V78191@freebie.lemis.com> from Greg Lehey at "Oct 8, 1999 11:28:40 am" To: grog@lemis.com (Greg Lehey) Date: Thu, 7 Oct 1999 23:34:15 -0400 (EDT) Cc: pds@uberhacker.org (Paul D . Schmidt), freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Greg Lehey wrote, > On Thursday, 7 October 1999 at 19:21:55 -0500, Paul D . Schmidt wrote: > > Hi, my vinum volume git corrupted somehow, but I don't seem to be able to > > get it back.... > > > > can't fsck it: > > # fsck /dev/vinum/rbigdrive > > ** /dev/vinum/rbigdrive > > > > CANNOT READ: BLK 59113504 > > CONTINUE? [yn] y > > > > THE FOLLOWING DISK SECTORS COULD NOT BE READ: 59113504, 59113505, 59113506, 59113507, > > /dev/vinum/rbigdrive: NOT LABELED AS A BSD FILE SYSTEM (unused) > > > > > > I always get this error when I boot up too: > > vinum: loaded > > Can't open history file /var/tmp/vinum_history: No such file or directory (2) > > > > Also, my system takes a really long time to halt, too...could it be because > > vinum isn't dying properly? Should there be a vinum stop in rc.shutdown > > or something? > > No. I don't know why your system takes a long time, but I'm pretty > sure it isn't because of Vinum. > > > I believe I read how to set this up in the freebsd diary, but it > > didn't say anything about how to stop vinum, just how to start > > it.... > > Well, the FreeBSD diary isn't exactly the definitive description of > Vinum. That's what man pages are for. To stop vinum, you enter the > command (wait for it) 'vinum stop'. But you don't need to do it > before a reboot. > > > Here is the output of vinum list: > > Configuration summary > > > > Drives: 1 (4 configured) > > Volumes: 1 (4 configured) > > Plexes: 1 (8 configured) > > Subdisks: 2 (16 configured) > > > > D a State: up Device /dev/wd1e Avail: 12409/12409 MB (99%) > > D b State: referenced Device Avail: 0/0 MB > > > > V bigdrive State: up Plexes: 1 Size: 28 GB > > > > P bigdrive.p0 C State: corrupt Subdisks: 2 Size: 28 GB > > > > S bigdrive.p0.s0 State: up PO: 0 B Size: 12 GB > > S bigdrive.p0.s1 State: crashed PO: 12 GB Size: 16 GB > > >From vinum(4): > > crashed A subdisk entry which has been created completely. All > fields are correct, the disk has been updated, and the > data was valid, but since then the drive has gone down. > No attempt has been made to write to the subdisk since > the crash, so the data is valid. > > The problem you have here is that your drive b isn't being found on > the system. Where is it located? Are the contents still valid? Take > a look at vinum(4) and look at the on-disk configuration. Just a thought, what is the "vinum_drives" entry in your /etc/rc.conf set to? -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:36:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 8949A14CCD for ; Thu, 7 Oct 1999 20:36:34 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id NAA96691; Fri, 8 Oct 1999 13:04:15 +0930 (CST) Date: Fri, 8 Oct 1999 13:04:15 +0930 From: Greg Lehey To: cjclark@home.com Cc: "Paul D . Schmidt" , freebsd-questions@FreeBSD.ORG Subject: Re: vinum volume corrupted Message-ID: <19991008130415.Z78191@freebie.lemis.com> References: <19991008112839.V78191@freebie.lemis.com> <199910080334.XAA19920@cc942873-a.ewndsr1.nj.home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <199910080334.XAA19920@cc942873-a.ewndsr1.nj.home.com> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thursday, 7 October 1999 at 23:34:15 -0400, Crist J. Clark wrote: > Greg Lehey wrote, >> On Thursday, 7 October 1999 at 19:21:55 -0500, Paul D . Schmidt wrote: >>> Hi, my vinum volume git corrupted somehow, but I don't seem to be able to >>> get it back.... >>> >>> can't fsck it: >>> # fsck /dev/vinum/rbigdrive >>> ** /dev/vinum/rbigdrive >>> >>> CANNOT READ: BLK 59113504 >>> CONTINUE? [yn] y >>> >>> THE FOLLOWING DISK SECTORS COULD NOT BE READ: 59113504, 59113505, 59113506, 59113507, >>> /dev/vinum/rbigdrive: NOT LABELED AS A BSD FILE SYSTEM (unused) >>> >>> >>> I always get this error when I boot up too: >>> vinum: loaded >>> Can't open history file /var/tmp/vinum_history: No such file or directory (2) >>> >>> Also, my system takes a really long time to halt, too...could it be because >>> vinum isn't dying properly? Should there be a vinum stop in rc.shutdown >>> or something? >>> >>> D a State: up Device /dev/wd1e Avail: 12409/12409 MB (99%) >>> D b State: referenced Device Avail: 0/0 MB >>> >>> V bigdrive State: up Plexes: 1 Size: 28 GB >>> >>> P bigdrive.p0 C State: corrupt Subdisks: 2 Size: 28 GB >>> >>> S bigdrive.p0.s0 State: up PO: 0 B Size: 12 GB >>> S bigdrive.p0.s1 State: crashed PO: 12 GB Size: 16 GB >> >> The problem you have here is that your drive b isn't being found on >> the system. Where is it located? Are the contents still valid? Take >> a look at vinum(4) and look at the on-disk configuration. > > Just a thought, what is the "vinum_drives" entry in your /etc/rc.conf > set to? Good point. It shouldn't be set to anything; it's going away from rc.conf. Use 'start_vinum' instead. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:52:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 9B56314CAB for ; Thu, 7 Oct 1999 20:52:16 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 43029 invoked by uid 1001); 8 Oct 1999 03:51:48 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 8 Oct 1999 03:51:48 -0000 Date: Thu, 7 Oct 1999 23:51:48 -0400 (EDT) From: Jaime Kikpole To: Brett Taylor Cc: Ralph Wiggum , questions@FreeBSD.ORG Subject: Re: amount of space for a FreeBSD 3.2 installation In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Brett Taylor wrote: > On Wed, 6 Oct 1999, Jaime Kikpole wrote: > > On Wed, 6 Oct 1999, Ralph Wiggum wrote: Ok..just got a quick > > > question here. How much space will I need for a full FreeBSD 3.2 > > > install? I have the 4 CD set. > These numbers are complete and utter bunk. If you're going to take the He said "full." I said "Depends on what you mean by "full"". I then gave some quick guesses base on the output of "df" on my home box. Sorry if I offended you. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:55:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 625D914F7F for ; Thu, 7 Oct 1999 20:55:10 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id XAA19992; Thu, 7 Oct 1999 23:56:51 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910080356.XAA19992@cc942873-a.ewndsr1.nj.home.com> Subject: Re: cdrecord question In-Reply-To: from "Jeremy L. Stock" at "Oct 7, 1999 10:28:50 pm" To: jstock@visi.com (Jeremy L. Stock) Date: Thu, 7 Oct 1999 23:56:51 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jeremy L. Stock wrote, > I recently installed a Traxdata SCSI CDRW drive My SCSI controller is an > Adeptec AVA 2906K both it and the CDRW get detected ok. From dmesg: > > ahc0: rev 0x03 int a irq 5 on pci0.10.0 > ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs > cd0 at ahc0 bus 0 target 4 lun 0 > cd0: Removable CD-ROM SCSI-2 device > cd0: 10.000MB/s transfers (10.000MHz, offset 15) > cd0: Attempt to query device size failed: NOT READY, Medium not present > cd9660: Joliet Extension > > However, when I run cdrecord -scanbus it returns > cdrecord: No such file or directory. Cannot open SCSI driver. > > Any ideas as to what's wrong would be appreciated. Hmmm... do you have /dev/ssc and /dev/pass0? -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 20:57: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from poseidon.hamsterville.ultranet.com (poseidon.hamsterville.ultranet.com [146.115.71.116]) by hub.freebsd.org (Postfix) with ESMTP id 82FB814F25 for ; Thu, 7 Oct 1999 20:56:55 -0700 (PDT) (envelope-from ben@hamsterville.ultranet.com) Received: from ENERGIZER (energizer.hamsterville.ultranet.com [146.115.71.106]) by poseidon.hamsterville.ultranet.com (8.9.3/8.9.0/1.0-bcg) with SMTP id XAA02411 for ; Thu, 7 Oct 1999 23:58:28 -0400 (EDT) Message-ID: <025301bf1141$6ef3c880$6a477392@dsg.hamsterville.ultranet.com> From: "Ben Goodwin" To: Subject: 3.3R box crashing; need help debugging the crash Date: Thu, 7 Oct 1999 23:58:51 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.5600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.5600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a box here that's crashing every once in a while and I'd like to determine why .. I don't know how to navigate/interpret kgdb well enough to figure out what's going on.. I'm hoping someone can help me.. I have the debug-compiled kernel and the files in the crash dir .. Perhaps someone would be kind enough to tell me what I need to paste here in email, or even d/l the necessary files and do the kgdb themselves? Thanks! -=| Ben To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 21: 3:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.austin.rr.com (sm1.texas.rr.com [24.93.35.54]) by hub.freebsd.org (Postfix) with ESMTP id DD440151B6 for ; Thu, 7 Oct 1999 21:03:29 -0700 (PDT) (envelope-from rluedtke@freewwweb.com) Received: from [24.28.89.89] ([24.28.89.89]) by mail.austin.rr.com with Microsoft SMTPSVC(5.5.1875.185.18); Thu, 7 Oct 1999 23:01:15 -0500 X-Mailer: Microsoft Outlook Express Macintosh Edition - 4.5 (0410) Date: Thu, 07 Oct 1999 23:01:16 -0500 Subject: StarOffice 3.1 port From: "Robert M. Luedtke" To: freeBSD-questions@freebsd.org Mime-version: 1.0 X-Priority: 3 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Message-ID: <00f9415010408a9SM1@mail.austin.rr.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm running FreeBSD 2.2.8. I installed the StarWriter 3.1 port with no problem. I ran ldconfig. The StarOffice installation screen comes up okay. I choose the first option and it seems okay. However, I get an error message: 'Can't find intialisation script /root/.sd.sh, User install must be completed before swriter3 can be run' I look in the /root directory and there is no .sd.sh script. Anyone else had this problem? Thanks for the assistance. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 21: 4: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sand2.sentex.ca (sand2.sentex.ca [209.167.248.3]) by hub.freebsd.org (Postfix) with ESMTP id 0042E153AB for ; Thu, 7 Oct 1999 21:04:01 -0700 (PDT) (envelope-from mike@sentex.net) Received: from gravel (ospf-mdt.sentex.net [205.211.164.81]) by sand2.sentex.ca (8.8.8/8.8.8) with SMTP id AAA02072 for ; Fri, 8 Oct 1999 00:03:15 -0400 (EDT) (envelope-from mike@sentex.net) Message-Id: <4.1.19991008000016.00d7a9c0@granite.sentex.ca> X-Sender: mdtancsa@granite.sentex.ca X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1 Date: Fri, 08 Oct 1999 00:03:12 -0400 To: questions@freebsd.org From: Mike Tancsa Subject: NIS ypupdated Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am just starting to experiment with NIS, and one thing I am not clear about is the existence of rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). in /etc/defaults/rc.conf According to the man pages for yp, While FreeBSD now has both NIS client and server capabilities, it does not yet have support for ypupdated(8) or the yp_update() function. Both of these require secure RPC, which FreeBSD doesn't support yet either. If its not supported, what is its function ? Thanks, ---Mike ********************************************************************** Mike Tancsa, Network Admin * mike@sentex.net Sentex Communications Corp, * http://www.sentex.net/mike Cambridge, Ontario * 01.519.651.3400 Canada * To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 21: 9: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from earth.wnm.net (earth.wnm.net [208.246.240.243]) by hub.freebsd.org (Postfix) with ESMTP id 77AAD153C4 for ; Thu, 7 Oct 1999 21:08:46 -0700 (PDT) (envelope-from alex@wnm.net) Received: from localhost (alex@localhost) by earth.wnm.net (8.8.8/8.8.8) with ESMTP id XAA29416; Thu, 7 Oct 1999 23:12:16 -0500 (CDT) Date: Thu, 7 Oct 1999 23:12:15 -0500 (CDT) From: Alex Charalabidis To: J McKitrick Cc: freebsd-questions@FreeBSD.ORG Subject: Re: mouse lockup in X In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, J McKitrick wrote: > Sometimes when i start FBSD, the mouse won't work in windowmaker. Other > times it is fine. Starting X again or logging out and back in don't work. > Only a reboot cures it. ANy ideas? > FBSD 3.2 > Toshiba Satellite laptop with PS/2 mouse I first encountered this immediately after upgrading to 3.3-RC. It would very rarely work when starting X and WM. The mouse (PS/2 to 9-pin adaptor on sio0 using the mousesystems protocol) would not work in console either. Both moused and X would detect it and identify it correctly but it would refuse to move. Initially I got it to work in Microsoft (two-button) mode only until I tried a more sophisticated approach... Try twiddling the mouse connector or dis- and reconnecting it - oddly enough, this is what fixes it for me. Since I'm pretty sure I don't have a hardware/connector problem and it only started doing it right after installing 3.3-RC, this behaviour strikes me as strange. -ac -- Alex Charalabidis WebNet Memphis (901) 432-6000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 21:17:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp11.bellglobal.com (smtp11.bellglobal.com [204.101.251.53]) by hub.freebsd.org (Postfix) with ESMTP id 7A06514BDE for ; Thu, 7 Oct 1999 21:17:12 -0700 (PDT) (envelope-from edirol@anime.ca) Received: from hitokiri.anime.ca (HSE-TOR-ppp25616.sympatico.ca [209.226.82.113]) by smtp11.bellglobal.com (8.8.5/8.8.5) with ESMTP id AAA05736 for ; Fri, 8 Oct 1999 00:18:19 -0400 (EDT) Received: from magus (magus.anime.ca [192.168.0.3]) by hitokiri.anime.ca (8.9.3/8.9.3) with SMTP id AAA27786 for ; Fri, 8 Oct 1999 00:14:27 -0400 (EDT) (envelope-from edirol@anime.ca) Message-ID: <00a501bf1143$9d5d9460$0300a8c0@anime.ca> From: "Edirol" To: Subject: natd - ping crash Date: Fri, 8 Oct 1999 00:14:27 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I'm running natd on a 3.3R system with the following command line options -s -m -u When I ping -R my box from another computer, after a while the system reboots itself. I remember this happened with 3.2R but I thought it was fixed for 3.3R. - Will To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 21:54:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail-out.visi.com (kauket.visi.com [209.98.98.22]) by hub.freebsd.org (Postfix) with ESMTP id 756CA14BDE for ; Thu, 7 Oct 1999 21:54:14 -0700 (PDT) (envelope-from jstock@visi.com) Received: from isis.visi.com (isis.visi.com [209.98.98.8]) by mail-out.visi.com (Postfix) with ESMTP id C244B3763; Thu, 7 Oct 1999 23:53:31 -0500 (CDT) Received: from localhost (jstock@localhost) by isis.visi.com (8.8.8/8.8.8) with ESMTP id XAA01488; Thu, 7 Oct 1999 23:53:31 -0500 (CDT) X-Authentication-Warning: isis.visi.com: jstock owned process doing -bs Date: Thu, 7 Oct 1999 23:53:31 -0500 (CDT) From: "Jeremy L. Stock" To: cjclark@home.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: cdrecord question In-Reply-To: <199910080356.XAA19992@cc942873-a.ewndsr1.nj.home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Crist J. Clark wrote: >Jeremy L. Stock wrote, >> I recently installed a Traxdata SCSI CDRW drive My SCSI controller is an >> Adeptec AVA 2906K both it and the CDRW get detected ok. From dmesg: >> >> ahc0: rev 0x03 int a irq 5 on pci0.10.0 >> ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs >> cd0 at ahc0 bus 0 target 4 lun 0 >> cd0: Removable CD-ROM SCSI-2 device >> cd0: 10.000MB/s transfers (10.000MHz, offset 15) >> cd0: Attempt to query device size failed: NOT READY, Medium not present >> cd9660: Joliet Extension >> >> However, when I run cdrecord -scanbus it returns >> cdrecord: No such file or directory. Cannot open SCSI driver. >> >> Any ideas as to what's wrong would be appreciated. > >Hmmm... do you have /dev/ssc and /dev/pass0? > I didn't have /dev/ssc but /dev/pass0 was there. I still see the same result after ./MAKEDEV ssc. I'm running FreeBSD 3.3-STABLE since I left that out earlier. -- Jeremy L. Stock ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 22:27:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web114.yahoomail.com (web114.yahoomail.com [205.180.60.86]) by hub.freebsd.org (Postfix) with SMTP id 55D6D15392 for ; Thu, 7 Oct 1999 22:27:10 -0700 (PDT) (envelope-from kjep@yahoo.com) Message-ID: <19991008052500.13893.rocketmail@web114.yahoomail.com> Received: from [192.176.216.26] by web114.yahoomail.com; Thu, 07 Oct 1999 22:25:00 PDT Date: Thu, 7 Oct 1999 22:25:00 -0700 (PDT) From: Johan Petersson Subject: Removing unwanted text To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi everyone, I am trying to create a filter that removes (or filters out) part of a text. The idea would be something like this: lynx -dump URL | (filter goes here) > textfile The part of the downloaded text that I want to keep always begins and ends with the same phrases (though the starting and ending phrases are not the same), and I want to keep all the lines in between but not those before and after. I've tried to work a bit with grep and diff, but I couldn't get i working. Does anyone have any ideas how to do this? Best regards Johan ===== __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 22:33:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from deepblue.big-blue.net (deepblue.big-blue.net [208.237.121.168]) by hub.freebsd.org (Postfix) with ESMTP id 73B46153FD for ; Thu, 7 Oct 1999 22:33:16 -0700 (PDT) (envelope-from alex@big-blue.net) Received: from big-blue.net (localhost.big-blue.net [127.0.0.1]) by deepblue.big-blue.net (8.9.3/8.9.3) with ESMTP id BAA04750; Fri, 8 Oct 1999 01:30:05 -0400 (EDT) (envelope-from alex@big-blue.net) Message-ID: <37FD815D.D557313E@big-blue.net> Date: Fri, 08 Oct 1999 01:30:05 -0400 From: Alex V P X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Johan Petersson Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Removing unwanted text References: <19991008052500.13893.rocketmail@web114.yahoomail.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Johan Petersson wrote: > Hi everyone, > > I am trying to create a filter that removes (or > filters out) part of a text. The idea would be > something like this: > > lynx -dump URL | (filter goes here) > textfile > > The part of the downloaded text that I want to keep > always begins and ends with the same phrases (though > the starting and ending phrases are not the same), > and I want to keep all the lines in between but not > those before and after. I've tried to work a bit with > grep and diff, but I couldn't get i working. > > Does anyone have any ideas how to do this? > > Best regards > Johan > > ===== > > __________________________________________________ > Do You Yahoo!? > Bid and sell for free at http://auctions.yahoo.com > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message use perl ;-) can u send example of the file and what needs to stay? ;-) alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 23: 7:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: from Michelle.esfm.ipn.mx (Michelle.esfm.ipn.mx [148.204.104.23]) by hub.freebsd.org (Postfix) with ESMTP id 379F314CEC for ; Thu, 7 Oct 1999 23:07:15 -0700 (PDT) (envelope-from mrspock@esfm.ipn.mx) Received: from localhost (mrspock@localhost) by Michelle.esfm.ipn.mx (8.9.3/8.9.1) with ESMTP id BAA03141 for ; Fri, 8 Oct 1999 01:06:08 -0500 (CDT) (envelope-from mrspock@esfm.ipn.mx) X-Authentication-Warning: Michelle.esfm.ipn.mx: mrspock owned process doing -bs Date: Fri, 8 Oct 1999 01:06:08 -0500 (CDT) From: Eduardo Viruena Silva To: freebsd-questions@freebsd.org Subject: TCL Midi? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello there! I have just received my FreeBSD 3.3. I have a FreeBSD box with a sound blaster card. I'm trying to use "rosegarden-2.1", it has some bugs in the distribution file, but they can be easily handled. But... "rosegarden" depends on "tclmidi-3.1" for playing (previous versions depended on "playmidi", but this package is not longer available). tclmidi-3.1 is avaliable for FreeBSD, but according to man pages there are some programs or functions that are not (completely) available in the tclmidi-3.1 package (v. gr. "mplay") Looking at the tclmidi-3.1 source code, I found a special directory called "drivers" and there there is a file saying that the whole kernel should be modified then compiled to create a "midi driver" (/usr/ports/audio/tclmidi/work/tclmidi-3.1/drivers/README.freebsd) FreeBSD version 3.3 is not source compatible with the directions for building the midi driver. But being very careful, the kernel's sources can be adapted. Nevertheless, when the kernel is compiled there are several compiling errors on some files (midi.c, and others). So, I got stuck. Could you please tell me how did you do it work? Thank you in advance. - ______ _ * / /###\ / \ __ /\ /\ * / ./#### \ * \__|_/ | | / \/ \ | b#####| * _ | __ | | __ = .. \____ \ \_\#####/ / \| / \ | | /\_\/ = \_| * \___\###/ * \_/\_/\__/\__\/_/\__/ = \______/ _ | | To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 23:13:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from proxy4.ba.best.com (proxy4.ba.best.com [206.184.139.15]) by hub.freebsd.org (Postfix) with ESMTP id 353F215442 for ; Thu, 7 Oct 1999 23:13:57 -0700 (PDT) (envelope-from Eric@BlossomAssociates.Com) Received: from pentiumpro (elb.vip.best.com [205.149.171.40]) by proxy4.ba.best.com (8.9.3/8.9.2/best.out) with ESMTP id XAA07453 for ; Thu, 7 Oct 1999 23:11:02 -0700 (PDT) Message-ID: <37FD8B46.758657E8@BlossomAssociates.Com> Date: Thu, 07 Oct 1999 23:12:22 -0700 From: Eric Blossom Organization: Blossom Associates West X-Mailer: Mozilla 4.01 [en] (WinNT; I) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: bzip2? X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm trying to get a port or two (lynx and PHP) and am stymied by errors about not having bzip2. I presume bzip2 is an archiver. Where do I get it? thanks, Eric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 23:23:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id 01E8B14C91 for ; Thu, 7 Oct 1999 23:22:56 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id JAA58796; Fri, 8 Oct 1999 09:21:29 +0300 (EEST) (envelope-from ru) Date: Fri, 8 Oct 1999 09:21:28 +0300 From: Ruslan Ermilov To: Ben Goodwin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3R box crashing; need help debugging the crash Message-ID: <19991008092128.F54236@relay.ucb.crimea.ua> Mail-Followup-To: Ben Goodwin , freebsd-questions@FreeBSD.ORG References: <025301bf1141$6ef3c880$6a477392@dsg.hamsterville.ultranet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <025301bf1141$6ef3c880$6a477392@dsg.hamsterville.ultranet.com>; from Ben Goodwin on Thu, Oct 07, 1999 at 11:58:51PM -0400 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, Oct 07, 1999 at 11:58:51PM -0400, Ben Goodwin wrote: > I have a box here that's crashing every once in a while and I'd like to > determine why .. I don't know how to navigate/interpret kgdb well enough to > figure out what's going on.. I'm hoping someone can help me.. I have the > debug-compiled kernel and the files in the crash dir .. Perhaps someone > would be kind enough to tell me what I need to paste here in email, or even > d/l the necessary files and do the kgdb themselves? Thanks! > > -=| Ben > Please take a look at http://www.FreeBSD.org/handbook/kerneldebug.html. Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 23:28:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cepheus.azstarnet.com (cepheus.azstarnet.com [169.197.56.195]) by hub.freebsd.org (Postfix) with ESMTP id 5003814E40 for ; Thu, 7 Oct 1999 23:28:53 -0700 (PDT) (envelope-from sbcorey@treefort.org) Received: from dialup001ip414 (dialup001ip414.tus.azstarnet.com [169.197.13.158]) by cepheus.azstarnet.com (8.9.3+blt.Beta0/8.9.3) with SMTP id XAA21714; Thu, 7 Oct 1999 23:28:30 -0700 (MST) X-Sent-via: StarNet http://www.azstarnet.com/ From: Scott Corey Reply-To: sbcorey@treefort.org To: Eric Blossom , freebsd-questions@FreeBSD.ORG Subject: Re: bzip2? Date: Thu, 7 Oct 1999 23:38:54 -0700 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain References: <37FD8B46.758657E8@BlossomAssociates.Com> MIME-Version: 1.0 Message-Id: <99100723392702.59204@dialup001ip414> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999, Eric Blossom wrote: > I'm trying to get a port or two (lynx and PHP) and am stymied by errors > about not having bzip2. I presume bzip2 is an archiver. Where do I get > it? > /usr/ports/archivers/bzip2 > thanks, > Eric ain't teknolergy wunnerful? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 23:29:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id 5447914CC3 for ; Thu, 7 Oct 1999 23:27:40 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id JAA58835; Fri, 8 Oct 1999 09:23:55 +0300 (EEST) (envelope-from ru) Date: Fri, 8 Oct 1999 09:23:55 +0300 From: Ruslan Ermilov To: Edirol Cc: freebsd-questions@FreeBSD.ORG Subject: Re: natd - ping crash Message-ID: <19991008092355.G54236@relay.ucb.crimea.ua> Mail-Followup-To: Edirol , freebsd-questions@FreeBSD.ORG References: <00a501bf1143$9d5d9460$0300a8c0@anime.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <00a501bf1143$9d5d9460$0300a8c0@anime.ca>; from Edirol on Fri, Oct 08, 1999 at 12:14:27AM -0400 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 12:14:27AM -0400, Edirol wrote: > Hi, > > I'm running natd on a 3.3R system with the following command line > options -s -m -u > > When I ping -R my box from another computer, after a while the system > reboots itself. > Reboots or panics? -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Thu Oct 7 23:34:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web129.yahoomail.com (web129.yahoomail.com [205.180.60.198]) by hub.freebsd.org (Postfix) with SMTP id D207314CC3 for ; Thu, 7 Oct 1999 23:34:42 -0700 (PDT) (envelope-from kjep@yahoo.com) Message-ID: <19991008063604.21385.rocketmail@web129.yahoomail.com> Received: from [192.176.216.26] by web129.yahoomail.com; Thu, 07 Oct 1999 23:36:04 PDT Date: Thu, 7 Oct 1999 23:36:04 -0700 (PDT) From: Johan Petersson Subject: Re: Removing unwanted text To: freebsd-questions@freebsd.org Cc: alex@big-blue.net MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="0-1804289383-939364564=:21383" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --0-1804289383-939364564=:21383 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I've attached a copy of the HTML file that will be filtered. Also I made a typo in the command line example, I meant to use lynx -source instead of -dump to filter the HTML. I plan to extract the part from the line before where it says "METAR Sweden" to almost at the end. (In other words removing all the junk at the top of the file...) The number of lines vary so I can't use that. --- Alex V P wrote: > Johan Petersson wrote: > > > Hi everyone, > > > > I am trying to create a filter that removes (or > > filters out) part of a text. The idea would be > > something like this: > > > > lynx -dump URL | (filter goes here) > textfile > > > > The part of the downloaded text that I want to > keep > > always begins and ends with the same phrases > (though > > the starting and ending phrases are not the same), > > and I want to keep all the lines in between but > not > > those before and after. I've tried to work a bit > with > > grep and diff, but I couldn't get i working. > > > > Does anyone have any ideas how to do this? > > > > Best regards > > Johan > > > > ===== > > > > __________________________________________________ > > Do You Yahoo!? > > Bid and sell for free at http://auctions.yahoo.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body > of the message > > use perl ;-) > can u send example of the file and what needs to > stay? ;-) > alex > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of > the message > ===== __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com --0-1804289383-939364564=:21383 Content-Type: text/html; name="metar.html" Content-Description: metar.html Content-Disposition: inline; filename="metar.html" MET

The Swedish Civil Aviation Administration aviation products are designed to be used by pilots and persons in the aviation world.

DISCLAIMER:
The information is distributed directly from the operational system at the Briefing Office and is identical to the one delivered from the Briefing Office, However, the information is supplied to the Internet by an administrative server therefore your attention is drawn to the fact that surveillance and reliability may not be equivalent to an operational server. In order to continuously secure information is delivered to the Internet echo TAFs and METARs are updated every five minutes. If any product is missing or if you suspect that the information has not been updated, please call the Briefing Office. If you any questions or opinions about the contents please, contact margareta.ryderstedt@ans.lfv.se

METAR TAF TAF LLF SIGMET Upperwinds NSWC
[Sweden] [Sweden] [Europe 18h] [Sundsvall]
[Nordic] [Nordic] [Stockholm]
[Europe] [Europe] [Malmö]


METAR Sweden

Last updated Fri Oct  8 06:25:03 UTC 1999
 
ESDA 080620 080620Z 25012KT 9000 -RA FEW007 SCT009 BKN011 12/11 Q1011=
ESDB 080550 080550Z 29016KT 9999 SCT010 BKN020 12/11 Q1011=
ESDF 080620 080620Z 20012KT 3500 RA BKN004 SCT016 11/11 Q1012=
ESGG 080620 24006KT 9999 FEW006 SCT025 10/10 Q1008=
ESGJ 080620 080620Z 19007KT 5000 -DZ BR OVC003 08/07 Q1009=
ESGT 080620 080620Z 19006KT 8000 BR BKN012 BKN040 10/09 Q1007=
ESGP 080550 080550Z 27011KT 9999 SCT046 SCT200 11/07 Q1009=
ESGR 080620 18007KT 9999 SCT010 BKN040 09/09 Q1008=
ESKN 080620 080620Z 21007KT CAVOK 07/05 Q1011=
ESMK 080550 080550Z 21006KT 7000 -RA SCT005 BKN010 11/11 Q1012=
ESMQ 080620 080620Z 19009KT 7000 -RA SCT016 BKN030 10/10 Q1013=
ESMS 080620 24013KT 3500 RA BR SCT005 BKN009 12/11 Q1012=
ESMT 080620 080620Z 28010KT 9999 FEW023 SCT120 12/10 Q1010=
ESMX 080550 17008KT 4000 -RA SCT003 BKN004 09/08 Q1010=
ESNG 080620 080620Z 32006KT 9999 BKN012 01/01 Q0998=
ESNK 080620 080620Z 33003KT 0200 R35/0125N BCFG SCT001 M02/M03 Q1006=
ESNN 080620 36002KT 0500N 7000S R16/0500 R34/1500 BCFG VCFG FEW002 
     SCT100 M02/M02 Q1006=
ESNO 080620 24006KT CAVOK 01/00 Q1004=
ESNQ 080550 36005KT 6000 SCT002 BKN007 00/M01 Q0998=
ESNS 080620 080620Z 26010KT 9999 -RADZ FEW020 BKN035 03/02 Q1000=
ESNU 080620 080620Z 23008KT CAVOK 02/00 Q1003=
ESOE 080620 19006KT 9999 SCT035 08/07 Q1008=
ESOK 080620 19011KT 9000 -RA FEW003 SCT007 BKN020 09/09 Q1006=
ESOW 080620 20010KT 9999 SCT012 BKN050 09/09 Q1009=
ESPA 080550 080550Z 29010KT 9999 BKN006 03/02 Q0998=
ESPC 080550 080550Z 16003KT 8000 BCFG SCT001 SCT100 00/00 Q1003=
ESSA 080620 20009KT 9999 -RA FEW008 SCT009 BKN050 09/07 Q1009 TEMPO 
     BKN009=
ESSB 080620 080620Z 22005KT 9999 SCT012 BKN070 09/08 Q1010=
ESSD 080620 080620Z 10003KT 6000 -DZ BR SCT006 BKN012 08/07 Q1006=
ESSK 080550 VRB01KT 2000 DZ BR OVC005 07/07 Q1007=
ESSL 080620 16005KT CAVOK 07/06 Q1010=
ESSP 080620 080620Z 17007KT 9999 SCT015 SCT030 07/06 Q1010=
ESSV 080620 20009KT 9999 SCT020 BKN090 10/08 Q1013=
--0-1804289383-939364564=:21383-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0: 0:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from boom.calcasieu.com (boom.calcasieu.com [209.99.46.80]) by hub.freebsd.org (Postfix) with ESMTP id C07D214DC5 for ; Fri, 8 Oct 1999 00:00:31 -0700 (PDT) (envelope-from dread@calcasieu.com) Received: from coypu.bb.calcasieu.com (coypu.bb.calcasieu.com [192.168.3.21]) by boom.calcasieu.com (8.9.3/8.9.3) with ESMTP id BAA20820; Fri, 8 Oct 1999 01:58:07 -0500 (CDT) Message-ID: X-Mailer: XFMail 1.3 [p0] on FreeBSD X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <19991008052500.13893.rocketmail@web114.yahoomail.com> Date: Fri, 08 Oct 1999 01:58:07 -0500 (CDT) Organization: Calcasieu Lumber From: Don Read To: Johan Petersson Subject: RE: Removing unwanted text Cc: freebsd-questions@FreeBSD.ORG Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 08-Oct-99 Johan Petersson wrote: > Hi everyone, > > I am trying to create a filter that removes (or > filters out) part of a text. The idea would be > something like this: > > lynx -dump URL | (filter goes here) > textfile > > The part of the downloaded text that I want to keep > always begins and ends with the same phrases (though > the starting and ending phrases are not the same), > and I want to keep all the lines in between but not > those before and after. I've tried to work a bit with > grep and diff, but I couldn't get i working. > awk '/start stuff/,/stop thingy/' Regards --- Don Read dread@calcasieu.com EDP Manager dread@texas.net Calcasieu Lumber Co. Austin TX -- Y2K is not a problem, W2K however ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0: 1: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from liu.dhis.org (geodial1.geology.wisc.edu [144.92.137.117]) by hub.freebsd.org (Postfix) with ESMTP id 5F2C614DC5 for ; Fri, 8 Oct 1999 00:01:05 -0700 (PDT) (envelope-from root@liu.dhis.org) Received: (from root@localhost) by liu.dhis.org (8.9.3/8.9.3) id CAA00668 for freebsd-questions@FreeBSD.ORG; Fri, 8 Oct 1999 02:02:09 -0500 (CDT) (envelope-from root) From: Charlie Root Message-Id: <199910080702.CAA00668@liu.dhis.org> Subject: ppp script To: freebsd-questions@FreeBSD.ORG Date: Fri, 8 Oct 1999 02:02:08 -0500 (CDT) X-Mailer: ELM [version 2.4ME+ PL43 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Could someone point out how to the auto ppp script from the manual way below? I also can connect with kppp, but its speed is about 50% slow than the manual one. I am using 56k moodem and FreeBSD 3.2. Thanks in advance! ######################### # manual typed commands # ######################### star# ppp Working in interactive mode Using interface: tun0 ppp ON star> term deflink: Entering terminal mode on /dev/cuaa1 Type `~?' for help at OK atdt2222222 CONNECT 115200 ISP Dial In User Access Verification Username: me Password: geodial>ppp Entering PPP mode. Async interface address is unnumbered (Ethernet0) Your IP address is xxx.xx.xxx.xxx. MTU is 1500 bytes Header compression will match your system. ~ppp ON star> PPp ON star> PPP ON star> set timeout 0 PPP ON star> add! default HISADDR PPP ON star> ############## # ppp.conf # ############## default: set log Phase Chat LCP IPCP CCP tun command set device /dev/cuaa1 set speed 115200 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\ dATDT\\T TIMEOUT 40 CONNECT" To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0: 3:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from s8-37-26.student.washington.edu (S8-37-26.student.washington.edu [128.208.37.26]) by hub.freebsd.org (Postfix) with ESMTP id A270514DC5 for ; Fri, 8 Oct 1999 00:03:10 -0700 (PDT) (envelope-from jcwells@u.washington.edu) Received: from localhost (jcw@localhost) by s8-37-26.student.washington.edu (8.9.3/8.9.3) with ESMTP id MAA80241 for ; Fri, 8 Oct 1999 12:04:45 GMT (envelope-from jcwells@u.washington.edu) X-Authentication-Warning: s8-37-26.student.washington.edu: jcw owned process doing -bs Date: Fri, 8 Oct 1999 12:04:44 +0000 (GMT) From: "Jason C. Wells" X-Sender: jcw@s8-37-26.student.washington.edu Reply-To: "Jason C. Wells" To: FreeBSD-questions Subject: Not Everyone Knows Ports Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have seen quite a few messages answered saying "It is in the ports collection" or "look in /usr/ports/foo". This is a quick note to remind us all that not everyone, especially newbies, know what a port is. I used sysinstall for my first three months in BSDland before I ever rolled my own. A link to http://www.freebsd.org/ports/ would be a great help. Plus it gets people into the fine manual. :) Thank You, | http://students.washington.edu/jcwells Jason Wells | "Those who would trade freedom for security deserve neither | freedom nor security." - Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0:31:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay.ucb.crimea.ua (relay.ucb.crimea.ua [212.110.138.1]) by hub.freebsd.org (Postfix) with ESMTP id B349A1543E for ; Fri, 8 Oct 1999 00:30:17 -0700 (PDT) (envelope-from ru@ucb.crimea.ua) Received: (from ru@localhost) by relay.ucb.crimea.ua (8.9.3/8.9.3/UCB) id KAA75838; Fri, 8 Oct 1999 10:27:53 +0300 (EEST) (envelope-from ru) Date: Fri, 8 Oct 1999 10:27:53 +0300 From: Ruslan Ermilov To: Charlie Root Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ppp script Message-ID: <19991008102753.C72163@relay.ucb.crimea.ua> Mail-Followup-To: Charlie Root , freebsd-questions@FreeBSD.ORG References: <199910080702.CAA00668@liu.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i In-Reply-To: <199910080702.CAA00668@liu.dhis.org>; from Charlie Root on Fri, Oct 08, 1999 at 02:02:08AM -0500 X-Operating-System: FreeBSD 3.3-STABLE i386 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 02:02:08AM -0500, Charlie Root wrote: > Hi, > > Could someone point out how to the auto ppp script from the manual way below? > I also can connect with kppp, but its speed is about 50% slow than the manual > one. I am using 56k moodem and FreeBSD 3.2. > > Thanks in advance! > > ######################### > # manual typed commands # > ######################### > star# ppp > Working in interactive mode > Using interface: tun0 > ppp ON star> term > deflink: Entering terminal mode on /dev/cuaa1 > Type `~?' for help > at > OK > atdt2222222 > CONNECT 115200 > ISP Dial In > > User Access Verification > > Username: me > Password: > geodial>ppp > Entering PPP mode. > Async interface address is unnumbered (Ethernet0) > Your IP address is xxx.xx.xxx.xxx. MTU is 1500 bytes > Header compression will match your system. > > ~ppp ON star> > PPp ON star> > PPP ON star> set timeout 0 > PPP ON star> add! default HISADDR > PPP ON star> > > > ############## > # ppp.conf # > ############## > default: > set log Phase Chat LCP IPCP CCP tun command > set device /dev/cuaa1 > set speed 115200 > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK \\ > dATDT\\T TIMEOUT 40 CONNECT" > Follow the instructions given in CONNECTING WITH YOUR INTERNET SERVICE PROVIDER section of the ppp(8) manpage, add an appropriate `set login', etc. Cheers, -- Ruslan Ermilov Sysadmin and DBA of the ru@ucb.crimea.ua United Commercial Bank, ru@FreeBSD.org FreeBSD committer, +380.652.247.647 Simferopol, Ukraine http://www.FreeBSD.org The Power To Serve http://www.oracle.com Enabling The Information Age To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0:44: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gwdu60.gwdg.de (gwdu60.gwdg.de [134.76.10.60]) by hub.freebsd.org (Postfix) with ESMTP id 996251544C for ; Fri, 8 Oct 1999 00:43:58 -0700 (PDT) (envelope-from kheuer@gwdu60.gwdg.de) Received: from localhost (kheuer@localhost) by gwdu60.gwdg.de (8.9.2/8.9.2) with ESMTP id JAA10538; Fri, 8 Oct 1999 09:42:16 +0200 (CEST) (envelope-from kheuer@gwdu60.gwdg.de) Date: Fri, 8 Oct 1999 09:42:16 +0200 (CEST) From: Konrad Heuer To: He Jun Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Question about CPU timeslice used in modern UNIX including BSD,LINUX In-Reply-To: <007401bf10c3$18656ab0$6e900185@cell.comm.eng.osaka-u.ac.jp> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, He Jun wrote: > My name is He Jun. I am a graduate student majoring in Communications in > Japan. I work on a project on load balancing in large-scale distributed > systems. For the purpose of research, I want to know how long is the CPU > time slice(or quantum)usually being set to in most modern UNIX systems > nowadays. I went to the Web site of freebad.org ,looking through several > documents of open source code, but failed to find out what I need > ultimately. So I turned to you for help. If you know the answer or where = the > answer is likely to be found,please be kind to email me.Thanks a lot. As far as I know, the most relevant source code file to your question is (e.g., on ftp.freebsd.org): pub/soft/unix/bsd/FreeBSD/branches/-current/src/sys/kern/kern_synch.c I didn't found the time to study it in detail, but it may be a starting point for you. Regards // // Konrad Heuer ____ ___ _____= __=20 // Gesellschaft f=FCr wissenschaftliche / __/______ ___ / _ )/ __= / _ \ // Datenverarbeitung mbH G=D6ttingen / _// __/ -_) -_) _ |\ \/= // / // Am Fa=DFberg, D-37077 G=D6ttingen /_/ /_/ \__/\__/____/___= /____/=20 // Deutschland (Germany) ----- The Power to Serve ----= - // http://www.freebsd.org // kheuer@gwdu60.gwdg.de // To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0:47:36 1999 Delivered-To: freebsd-questions@freebsd.org Received: from caligula.anu.edu.au (caligula.anu.edu.au [150.203.224.42]) by hub.freebsd.org (Postfix) with ESMTP id A260214CCD for ; Fri, 8 Oct 1999 00:47:32 -0700 (PDT) (envelope-from rob@coombs.anu.edu.au) Received: from localhost (rob@localhost) by caligula.anu.edu.au (8.9.3/8.9.1) with ESMTP id RAA05534 for ; Fri, 8 Oct 1999 17:48:23 +1000 (EST) X-Authentication-Warning: caligula.anu.edu.au: rob owned process doing -bs Date: Fri, 8 Oct 1999 17:48:23 +1000 (EST) From: Rob Hurle X-Sender: rob@caligula.anu.edu.au To: freebsd-questions@freebsd.org Subject: StarOffice 5.1 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG SUN has recently bought StarOffice, and they now have a CD of version 5.1 available (for "free"). This loads under Redhat Linux, version 5.1 using a neat X-windows interface. However, it will not begin under FreeBSD. I have installed FreeBSD 3.3 and the linux_base-5.2 package. I've tried setting up /lib -> /usr/compat/linux/lib (and even putting /lib in the ldconfig hints file). However, all I ever get is: setup.bin: error in loading shared libraries libvos517li.so: cannot open shared object file: No such file or directory The setup program unpacks stuff into /tmp - including lots of shared libraries, one being this libvos517li.so (anything with 517 seems to refer to version 5.1.7 of StarOffice). This one refers to other libraries, etc. Has anyone got any further with this, or any clues? Thanks. Rob Hurle ---------------------------------------------------------- Rob Hurle rob@coombs.anu.edu.au Connect-A Tel: +61 2 6247 2397 PO Box 13 Fax: +61 2 6248 8905 Ainslie ACT 2602 Mobile: 0417 293 603 Australia ---------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 0:52:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ux-2s02.inf.fh-rhein-sieg.de (ux-2s02.inf.fh-rhein-sieg.de [194.95.66.3]) by hub.freebsd.org (Postfix) with ESMTP id 3A0CE14F27 for ; Fri, 8 Oct 1999 00:51:54 -0700 (PDT) (envelope-from Sebastian.Lederer@inf.fh-rhein-sieg.de) Received: from inf.fh-rhein-sieg.de (pc-2207.inf.fh-rhein-sieg.de [192.168.1.103]) by ux-2s02.inf.fh-rhein-sieg.de (8.9.1b+Sun/8.9.1) with ESMTP id JAA27192; Fri, 8 Oct 1999 09:45:12 +0200 (MET DST) Message-ID: <37FD965D.2254E953@inf.fh-rhein-sieg.de> Date: Fri, 08 Oct 1999 08:59:41 +0200 From: Sebastian Lederer Organization: FH Rhein Sieg X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i586) X-Accept-Language: en MIME-Version: 1.0 To: jstock@visi.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: cdrecord question Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jeremy L. Stock wrote: [...] >>Hmmm... do you have /dev/ssc and /dev/pass0? >> > >I didn't have /dev/ssc but /dev/pass0 was there. I still see the same result >after ./MAKEDEV ssc. I'm running FreeBSD 3.3-STABLE since I left that out >earlier. You probably also need /dev/xpt0 , and "device xpt0" and "device pass0" in your kernel config, if it's not already there. (BTW, the /dev/ssc device does not exist anymore (since FreeBSD 3.0), and even before that, it was not really useful) Hope this helps, - Sebastian Lederer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 1: 5: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ns1.portal2.com (ns1.portal2.com [203.85.226.193]) by hub.freebsd.org (Postfix) with SMTP id 1348614F27 for ; Fri, 8 Oct 1999 01:04:59 -0700 (PDT) (envelope-from yusufg@outblaze.com) Received: (qmail 90205 invoked from network); 8 Oct 1999 08:02:14 -0000 Received: from yusufg.portal2.com (qmailr@203.85.226.249) by ns1.portal2.com with SMTP; 8 Oct 1999 08:02:14 -0000 Received: (qmail 31731 invoked by uid 500); 8 Oct 1999 08:03:16 -0000 Date: Fri, 8 Oct 1999 16:03:16 +0800 From: Yusuf Goolamabbas To: Chris Dillon Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Trying to achieve zen with natd Message-ID: <19991008160316.A31723@outblaze.com> References: <19991006112744.A3111@outblaze.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > > > That doesn't really make any sense... Is fxp1 attached to your > > > private network, or the public network? > > > > Both, some machines on that network have valid routable address and some > > machines have non routable addresses. Therefore I have aliased a 192.168 > > on this interface > > > > What I would like is packets coming via this aliased interface get > > NAT'ted to the public interface which is also bound to the same card > > This card is connected to a switch which connects via a router to the > > WAN interface > > Aah, now that makes sense. Someone asked me how to do this just the > other day. :-) Put the IP address of the alias you assigned to fxp1 > in natd_interface="" in /etc/rc.conf instead of the interface name. Did that in the beggining. The issue is that the machines default router is on 'fxp0' whilst the NATD alias is on "fxp1". Machines in the 192.168.0 network can only go to the network listed on fxp1. They can't go to the network on fxp0 . Is this what NAT is supposed to do What I thought was that NAT would rewrite the source addresses of incoming packets to the real IP address bound to fxp1 and then normal routing would occur from there. This doesn't seem to be happening To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 1:25:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.knu.ac.kr (unix.kyungpook.ac.kr [155.230.124.116]) by hub.freebsd.org (Postfix) with ESMTP id DCBAD14F4F for ; Fri, 8 Oct 1999 01:25:37 -0700 (PDT) (envelope-from hdcho@unix.knu.ac.kr) Received: (from hdcho@localhost) by unix.knu.ac.kr (8.9.3/8.9.3) id RAA02870 for freebsd-questions@freebsd.org; Fri, 8 Oct 1999 17:23:58 +0900 (KST) (envelope-from hdcho) Date: Fri, 8 Oct 1999 17:23:58 +0900 (KST) From: Huidae Cho Message-Id: <199910080823.RAA02870@unix.knu.ac.kr> To: freebsd-questions@freebsd.org Subject: FTP incoming dir Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I heard that anonymous ftp users can only append files in sticky bit dir and cannot remove them in Solaris. So i do the same in FreeBSD. But this doesn't work. How can i prevent anonymous users from removing files in incoming dir? Regards, Huidae Cho To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 1:36: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id C148615414 for ; Fri, 8 Oct 1999 01:35:59 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.196.53]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA4F; Fri, 8 Oct 1999 10:35:56 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id KAA22008; Fri, 8 Oct 1999 10:36:52 +0200 (CEST) (envelope-from asmodai) Date: Fri, 8 Oct 1999 10:36:51 +0200 From: Jeroen Ruigrok/Asmodai To: ravikm@us.ibm.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Loadable drivers in FreeBSD and NetBSD Message-ID: <19991008103651.R11071@daemon.ninth-circle.org> References: <85256803.0076AFC5.00@d54mta07.raleigh.ibm.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <85256803.0076AFC5.00@d54mta07.raleigh.ibm.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991008 00:00], ravikm@us.ibm.com (ravikm@us.ibm.com) wrote: >We are trying to see if we can convert the drivers in our NetBSD >implementation into loadable drivers so that we can reduce the size of >the kernel. I know that in Linux, we can achieve this by adding the >entry and exit points - init_module() and cleanup_module(), and adding >the MODULE flag to the compiles for the driver code. Then we should be >able to add and remove them dynamically using the commands "insmod" and >"rmmod". Linux drivers overcomplicate the problem by requiring module code in every single driver, thus bloating and obfuscating the code. >How does it work on the NetBSD and FreeBSD. Do we need to add the same >routines in the drivers and compile them with the MODULE flag? Also, >would the kernel then not have these drivers statically linked? >Is the dynamic loadability feature supported in the NetBSD 1.4/1.5 kernels? Thank god, not at all =) We write a driver, add DRIVER_MODULE() to the main .c of a driver and then add the appropriate stuff to /usr/src/sys/modules At least that's what I do for the NIC driver I am writing. I cannot answer the NetBSD questions. Please re-ask those on the appropriate NetBSD list, since I have no idea. >Can these drivers be hot-loaded at runtime, or do they need to be >explicitly loaded using some commands such as "insmod" or so. They can be hot-loaded at boottime, but they can also be loaded in the fly by kldload and kldunload. -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Whispering winds in moonlit wood, a totem oak once golden stood... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 2:45:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 5553414BFA for ; Fri, 8 Oct 1999 02:45:38 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZWZa-000EkL-00; Fri, 08 Oct 1999 11:44:22 +0200 From: Sheldon Hearn To: "Thiago Sayao" Cc: questions@FreeBSD.ORG Subject: Re: libraries In-reply-to: Your message of "Thu, 07 Oct 1999 11:01:42 -0300." <000901bf10cc$af3c4a40$11ddfea9@Sayao> Date: Fri, 08 Oct 1999 11:44:22 +0200 Message-ID: <56688.939375862@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 11:01:42 -0300, "Thiago Sayao" wrote: > please, i'm having problems with the shared libs, the configuration > scrips are not finding the jpeg, png, gif ... libs, but they are > there! and it is in the ldconfig_path. What are "the configuration scripts"? How are they trying to find these libraries? How did you install the libraries? What error messages are you actually getting and what library files do you actually have? Given the lack of information in your mail, I have to suggest some fairly general advice. :-) You say that the paths to the libraries are in ldconfig_path. However, if you haven't updated the ld.so hints since you installed the files, ldconfig won't "find" them. Do you see the files you have installed when you do this: ldconfig -r | egrep '(jpeg|png|gif)' If not, you may need to rescan the ldconfig_path paths with this command and try again: ldconfig -R Then try again and see whether ldconfig knows about your library files. If that doesn't work, you really will need to provide more information. :-) Good luck, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 2:58:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 9522714E90 for ; Fri, 8 Oct 1999 02:58:52 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZWnM-000Ent-00; Fri, 08 Oct 1999 11:58:36 +0200 From: Sheldon Hearn To: "Ben Goodwin" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3R box crashing; need help debugging the crash In-reply-to: Your message of "Thu, 07 Oct 1999 23:58:51 -0400." <025301bf1141$6ef3c880$6a477392@dsg.hamsterville.ultranet.com> Date: Fri, 08 Oct 1999 11:58:36 +0200 Message-ID: <56908.939376716@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 23:58:51 -0400, "Ben Goodwin" wrote: > I have a box here that's crashing every once in a while and I'd like > to determine why .. I don't know how to navigate/interpret kgdb well > enough to figure out what's going on.. Cool, perhaps if you provide some interesting information, someone _else_ will know how to interpret it. :-) First, we make some assumptions here: 1) When you configured your kernel, you did ``config -g'' for debugging support. 2) Hopefully, your crash isn't happening inside a kld. That's icky. For this situation, try to limit the number of kld's you use. gdb -k /path/to/kernel.debug /var/crash/vmcore.0 Gdb should tell you about the panic. You can then issue the command ``back'' at the GDB prompt to get a backtrace. Then cut'n'paste everything that follows the gdb copyright notice. :-) Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 3: 3:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 9BD6A14C4B for ; Fri, 8 Oct 1999 03:03:29 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZWrm-000EpQ-00; Fri, 08 Oct 1999 12:03:10 +0200 From: Sheldon Hearn To: Eric Blossom Cc: freebsd-questions@FreeBSD.ORG Subject: Re: bzip2? In-reply-to: Your message of "Thu, 07 Oct 1999 23:12:22 MST." <37FD8B46.758657E8@BlossomAssociates.Com> Date: Fri, 08 Oct 1999 12:03:10 +0200 Message-ID: <57003.939376990@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 07 Oct 1999 23:12:22 MST, Eric Blossom wrote: > I'm trying to get a port or two (lynx and PHP) and am stymied by errors > about not having bzip2. I presume bzip2 is an archiver. Where do I get > it? It's in the ports tree, in the ports/archivers/bzip2 directory. Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 3: 9:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from binky.de.uu.net (binky.de.uu.net [192.76.144.28]) by hub.freebsd.org (Postfix) with ESMTP id 2D56514C4B for ; Fri, 8 Oct 1999 03:09:54 -0700 (PDT) (envelope-from CHUETTL@ahorn.sgh.uunet.de) Received: from huettl (pec-17-2.tnt1.b.uunet.de [149.225.17.2]) by binky.de.uu.net (5.5.5/5.5.5) with ESMTP id MAA27406 for ; Fri, 8 Oct 1999 12:09:52 +0200 (MET DST) Received: from Spooler by huettl (Mercury/32 v2.16); 8 Oct 99 12:11:26 +0200 Received: from spooler by ahorn.sgh.uunet.de (Mercury/32 v2.16); 8 Oct 99 12:10:58 +0200 From: "Carsten Huettl" Organization: ahorn.Net To: freebsd-questions@FreeBSD.org Date: Fri, 8 Oct 1999 12:10:44 +0200 Subject: make depend fails X-mailer: Pegasus Mail for Win32 (v3.01d) Message-ID: <22E28AA84E76@ahorn.sgh.uunet.de> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, after upgrading from v.2.2.8 to 3.2 (CD version) I try building a new kernel. I followed the instructions from the online docs went to the right directory but when starting make depend I got the following error: #make depend make -f ../../dev/aic7xxx/Makefile MAKESRCPATH=../../dev/aic7xxx Warning: Object directory not changed from original /usr/src/sys/compile/TIAMAT cc -O -pipe -I/usr/include -I. -o aicasm aicasm_gram.o aicasm_scan.o aicasm.o aicasm_symbol.o -ll aicasm_gram.o: file not recognized: File format not recognized *** Error code 1 Stop. *** Error code 1 So what can I do to resolve the problem? TIA C. -- Carsten Huettl - pgp-key on request To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 3:42:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail11.jump.net (mail11.jump.net [207.8.124.20]) by hub.freebsd.org (Postfix) with ESMTP id 7024915479 for ; Fri, 8 Oct 1999 03:42:08 -0700 (PDT) (envelope-from geb@silres.com) Received: from silres.com by mail11.jump.net (jump-tnt-0072.customer.jump.net [207.8.127.72]) (8.9.0/jump.1.11) id FAA28543; for Fri, 8 Oct 1999 05:41:55 -0500 (CDT) Message-ID: <37FDCC20.7FB783F1@silres.com> Date: Fri, 08 Oct 1999 05:49:05 -0500 From: "Gerald E. Bennett" Organization: Silicon Resources X-Mailer: Mozilla 4.06 [en] (X11; I; FreeBSD 2.2.8-RELEASE i386) MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: cdrecord can't get my cd to workaic0 at 0x140-0x15f irq 12 on isa aic0 waiting for scsi devices to settle (aic0:3:0aic0 at 0x140-0x15f irq 12 on isa aic0 waiting for scsi devices to settle Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am having trouble using cdrecord I tried the following dmesg gives me: aic0 at 0x140-0x15f irq 12 on isa aic0 waiting for scsi devices to settle (aic0:3:0aic0 at 0x140-0x15f irq 12 on isa aic0 waiting for scsi devices to settle (aic0:3:0): "YAMAHA CRW6416S 1.0b" type 5 removable SCSI 2 cd0(aic0:3:0): CD-ROM cd present [400000 x 2048 byte records] ep0 not found at 0x300): "YAMAHA CRW6416S 1.0b" type 5 removable SCSI 2 cd0(aic0:3:0): CD-ROM cd present [400000 x 2048 byte records] cdrecord dev=0,3,0 -scanbus Cdrecord release 1.6a12 Copyright (C) 1995-1998 Jörg Schilling scsidev: '0,3,0' scsibus: 0 target: 3 lun: 0 cdrecord: No target found. Why is this what am I doing wrong ? I did add to my kernel the following: options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" and device pass0 #CAM passthrough driver could I be missing something here ?? thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 5:23:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gatekeeper.veriohosting.com (gatekeeper.veriohosting.com [192.41.0.2]) by hub.freebsd.org (Postfix) with ESMTP id 9367514D9D for ; Fri, 8 Oct 1999 05:23:11 -0700 (PDT) (envelope-from punc@stunkworks.com) Received: by gatekeeper.veriohosting.com; Fri, 8 Oct 1999 06:23:10 -0600 (MDT) From: punc@stunkworks.com Received: from unknown(192.168.1.196) by gatekeeper.veriohosting.com via smap (V3.1.1) id xma021848; Fri, 8 Oct 99 06:22:50 -0600 Message-Id: <3.0.6.32.19991008062312.007b19e0@stunkworks.com> X-Sender: punc@stunkworks.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Fri, 08 Oct 1999 06:23:12 -0600 To: freebsd-questions@FreeBSD.ORG Subject: creating /dev/null Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm trying to figure out how to re-create /dev/null after it disappears... I'm not sure why it disappeared, but I want it back! MarkS This is a StunkWorks product. _____________________________________ Sure, you can get free email and hosting, but do you seriously think it's gonna be any good? _____________________________________ "Challenger" - 93 Jeep YJ - I'm just looking for an excuse to park on you. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 5:33:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 801B214D82 for ; Fri, 8 Oct 1999 05:33:35 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZZD2-000FMg-00; Fri, 08 Oct 1999 14:33:16 +0200 From: Sheldon Hearn To: punc@stunkworks.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: creating /dev/null In-reply-to: Your message of "Fri, 08 Oct 1999 06:23:12 CST." <3.0.6.32.19991008062312.007b19e0@stunkworks.com> Date: Fri, 08 Oct 1999 14:33:15 +0200 Message-ID: <59065.939385995@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 08 Oct 1999 06:23:12 CST, punc@stunkworks.com wrote: > I'm trying to figure out how to re-create /dev/null after it disappears... > I'm not sure why it disappeared, but I want it back! cd /dev ./MAKEDEV std Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 5:36:13 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netvisor.hu (mmtp89.mit.bme.hu [152.66.81.169]) by hub.freebsd.org (Postfix) with ESMTP id E2AF014D05 for ; Fri, 8 Oct 1999 05:35:56 -0700 (PDT) (envelope-from szoli@netvisor.hu) Received: from localhost (szoli@localhost) by netvisor.hu (8.8.7/8.8.7) with ESMTP id OAA22396 for ; Fri, 8 Oct 1999 14:34:45 +0200 Date: Fri, 8 Oct 1999 14:34:45 +0200 (CEST) From: Sebestyen Zoltan X-Sender: szoli@linux.intranet.netvisor.hu To: FreeBSD questions mailinglist Subject: Netscape customization. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=iso-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Does anyone have some idea, how to get Netscape get the current colors of the KDE desktop? Once it worked and most of the Motif apps use KDE colors AND font properties, but not Netscape. If only Netscape forgot Motif and would switch to GTK[OK, I know Mozilla already has GTK GUI..] Another question why does not Alt+N [New window]work?=20 =09=09Thanks ---------------------------------------------------------------------------= ----- Sebesty=E9n Zolt=E1n =09There was a time when all on my = mind=20 =09=09=09=09=09was love. MAKE INSTALL NOT WAR=09=09=09Now I find that most of the time =09=09=09=09=09love's not enough in itself. =20 The box said: "Windows 95, Windows NT 4 OR BETTER", so I installed FreeBSD= =2E To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 5:36:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from netsrv.lhmc.ac.uk (NETSRV.lhmc.ac.uk [161.23.16.7]) by hub.freebsd.org (Postfix) with SMTP id 3B5C914D05 for ; Fri, 8 Oct 1999 05:36:29 -0700 (PDT) (envelope-from d.m.proffitt@mds.qmw.ac.uk) Received: from mds.qmw.ac.uk (smt-csd-56.mds.qmw.ac.uk [138.37.159.16]) by netsrv.lhmc.ac.uk (8.6.12/8.6.12) with ESMTP id NAA19243 for ; Fri, 8 Oct 1999 13:37:36 +0100 Message-ID: <37FDE561.368ED9F6@mds.qmw.ac.uk> Date: Fri, 08 Oct 1999 13:36:49 +0100 From: David Proffitt X-Mailer: Mozilla 4.6 [en] (Win95; I) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Subject: ld.so and Netscape Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello I installed Netscape Communicator from the packages collection (under freeBSD 3.2) When I try to run it I get an error: Couldn't open /usr/libexec/ld.so One of my colleagues installed a different set of packages and Netscape runs fine so I suppose this library must have been installed as a dependency of something else? I have been through the packages but can't find anything that obviously contains this file A pointer to how to get this working appreciated -- David ====================================== David Proffitt - Systems Programmer St Bartholomew's and the Royal London School of Medicine and Dentistry QMW d.m.proffitt@mds.qmw.ac.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:14:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from alcatel.fr (gatekeeper.alcatel.fr [194.133.58.131]) by hub.freebsd.org (Postfix) with ESMTP id 4B9CA14FEF for ; Fri, 8 Oct 1999 06:14:24 -0700 (PDT) (envelope-from thierry.herbelot@alcatel.fr) Received: from alcatel.fr (gatekeeper-ssn.alcatel.fr [155.132.180.244]) by mailgate.alcatel.fr (ALCANET/SMTP) with ESMTP id OAA29314; Fri, 8 Oct 1999 14:09:41 +0200 Received: from lune.telspace.alcatel.fr (lune.telspace.alcatel.fr [155.132.144.65]) by aifhs2.alcatel.fr (ALCANET/SMTP2) with ESMTP id PAA07518; Fri, 8 Oct 1999 15:13:56 +0200 (MET DST) Received: from telss1 (telss1.telspace.alcatel.fr [155.132.51.4]) by lune.telspace.alcatel.fr (8.9.1a/8.9.1) with ESMTP id OAA23778; Fri, 8 Oct 1999 14:39:10 +0200 (MEST) Received: from alcatel.fr by telss1 (8.8.8+Sun/SMI-SVR4) id OAA27512; Fri, 8 Oct 1999 14:52:39 +0200 (MET DST) Message-ID: <37FDE87E.1EB44114@alcatel.fr> Date: Fri, 08 Oct 1999 14:50:06 +0200 From: Thierry Herbelot Reply-To: thierry.herbelot@alcatel.fr Organization: ALCATEL CIT Nanterre X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Carsten Huettl Cc: freebsd-questions@FreeBSD.ORG Subject: Re: make depend fails References: <22E28AA84E76@ahorn.sgh.uunet.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hello, Isn't this caused by the fact that the aic driver is not supported in 3.2 (nor in 3.3) ; this is explained in the release notes TfH Carsten Huettl wrote: > > Hello, > > after upgrading from v.2.2.8 to 3.2 (CD version) I try building a new > kernel. > I followed the instructions from the online docs went to the right > directory but when starting make depend I got the following error: > > #make depend > > make -f ../../dev/aic7xxx/Makefile MAKESRCPATH=../../dev/aic7xxx > Warning: Object directory not changed from original > /usr/src/sys/compile/TIAMAT > cc -O -pipe -I/usr/include -I. -o aicasm aicasm_gram.o > aicasm_scan.o aicasm.o > aicasm_symbol.o -ll > aicasm_gram.o: file not recognized: File format not recognized > *** Error code 1 > > Stop. > *** Error code 1 > > So what can I do to resolve the problem? > > TIA > C. > > -- > Carsten Huettl - > pgp-key on request > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:15:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from alcatel.fr (gatekeeper.alcatel.fr [194.133.58.131]) by hub.freebsd.org (Postfix) with ESMTP id E316914F27 for ; Fri, 8 Oct 1999 06:15:44 -0700 (PDT) (envelope-from thierry.herbelot@alcatel.fr) Received: from alcatel.fr (gatekeeper-ssn.alcatel.fr [155.132.180.244]) by mailgate.alcatel.fr (ALCANET/SMTP) with ESMTP id OAA29719; Fri, 8 Oct 1999 14:11:04 +0200 Received: from lune.telspace.alcatel.fr (lune.telspace.alcatel.fr [155.132.144.65]) by aifhs2.alcatel.fr (ALCANET/SMTP2) with ESMTP id PAA08420; Fri, 8 Oct 1999 15:15:14 +0200 (MET DST) Received: from telss1 (telss1.telspace.alcatel.fr [155.132.51.4]) by lune.telspace.alcatel.fr (8.9.1a/8.9.1) with ESMTP id OAA23994; Fri, 8 Oct 1999 14:40:33 +0200 (MEST) Received: from alcatel.fr by telss1 (8.8.8+Sun/SMI-SVR4) id OAA27607; Fri, 8 Oct 1999 14:54:03 +0200 (MET DST) Message-ID: <37FDE8D1.D0F6FA27@alcatel.fr> Date: Fri, 08 Oct 1999 14:51:30 +0200 From: Thierry Herbelot Reply-To: thierry.herbelot@alcatel.fr Organization: ALCATEL CIT Nanterre X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: "Gerald E. Bennett" Cc: freebsd-questions@FreeBSD.ORG Subject: Re: cdrecord can't get my cd to workaic0 at 0x140-0x15f irq 12 on isaaic0 waiting for scsi devices to settle(aic0:3:0aic0 at 0x140-0x15f irq 12 on isaaic0 waiting for scsi devices to settle References: <37FDCC20.7FB783F1@silres.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Which version of FreeBSD ? could you upgrade to the latest version of cdrecord ? TfH "Gerald E. Bennett" wrote: > > I am having trouble using cdrecord > I tried the following > dmesg gives me: > > aic0 at 0x140-0x15f irq 12 on isa > aic0 waiting for scsi devices to settle > (aic0:3:0aic0 at 0x140-0x15f irq 12 on isa > aic0 waiting for scsi devices to settle > (aic0:3:0): "YAMAHA CRW6416S 1.0b" type 5 removable SCSI 2 > cd0(aic0:3:0): CD-ROM cd present [400000 x 2048 byte records] > ep0 not found at 0x300): "YAMAHA CRW6416S 1.0b" type 5 removable SCSI 2 > cd0(aic0:3:0): CD-ROM cd present [400000 x 2048 byte records] > > cdrecord dev=0,3,0 -scanbus > Cdrecord release 1.6a12 Copyright (C) 1995-1998 Jörg Schilling > scsidev: '0,3,0' > scsibus: 0 target: 3 lun: 0 > cdrecord: No target found. > > Why is this what am I doing wrong ? > > I did add to my kernel the following: > > options "P1003_1B" > options "_KPOSIX_PRIORITY_SCHEDULING" > options "_KPOSIX_VERSION=199309L" > > and > device pass0 #CAM passthrough driver > > could I be missing something here ?? > > thanks > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:30: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from monsoon.mail.pipex.net (monsoon.mail.pipex.net [158.43.128.69]) by hub.freebsd.org (Postfix) with SMTP id BCC6B14D18 for ; Fri, 8 Oct 1999 06:29:56 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 25369 invoked from network); 8 Oct 1999 13:29:55 -0000 Received: from userat26.uk.uudial.com (HELO marder-1.) (62.188.137.129) by smtp.dial.pipex.com with SMTP; 8 Oct 1999 13:29:55 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id OAA00536; Fri, 8 Oct 1999 14:29:48 +0100 (BST) (envelope-from mark) Date: Fri, 8 Oct 1999 14:29:48 +0100 From: Mark Ovens To: Rob Hurle Cc: freebsd-questions@freebsd.org Subject: Re: StarOffice 5.1 Message-ID: <19991008142948.A316@marder-1> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 05:48:23PM +1000, Rob Hurle wrote: > SUN has recently bought StarOffice, and they now have a CD of > version 5.1 available (for "free"). This loads under Redhat Linux, > version 5.1 using a neat X-windows interface. However, it will not begin > under FreeBSD. I have installed FreeBSD 3.3 and the linux_base-5.2 > package. I've tried setting up > > /lib -> /usr/compat/linux/lib > > (and even putting /lib in the ldconfig hints file). However, all I ever > get is: > > setup.bin: error in loading shared libraries > libvos517li.so: cannot open shared object file: No such file or > directory > Ugh. I was getting the same/similar error about the same file but without having installed linux_base. Now I'm having problems installing that (from the ports) :(. Seems like it won't solve my problem. If/when you get the solution will you please be sure to post it to the list, or to me privately. Thanks. > The setup program unpacks stuff into /tmp - including lots of shared > libraries, one being this libvos517li.so (anything with 517 seems to refer > to version 5.1.7 of StarOffice). This one refers to other libraries, etc. > > Has anyone got any further with this, or any clues? Thanks. > > Rob Hurle > ---------------------------------------------------------- > Rob Hurle rob@coombs.anu.edu.au > Connect-A Tel: +61 2 6247 2397 > PO Box 13 Fax: +61 2 6248 8905 > Ainslie ACT 2602 Mobile: 0417 293 603 > Australia > ---------------------------------------------------------- > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:31:47 1999 Delivered-To: freebsd-questions@freebsd.org Received: from typhoon.mail.pipex.net (typhoon.mail.pipex.net [158.43.128.27]) by hub.freebsd.org (Postfix) with SMTP id B38D214D18 for ; Fri, 8 Oct 1999 06:31:37 -0700 (PDT) (envelope-from mark@dogma.freebsd-uk.eu.org) Received: (qmail 15106 invoked from network); 8 Oct 1999 13:31:36 -0000 Received: from userat26.uk.uudial.com (HELO marder-1.) (62.188.137.129) by smtp.dial.pipex.com with SMTP; 8 Oct 1999 13:31:36 -0000 Received: (from mark@localhost) by marder-1. (8.9.3/8.8.8) id OAA00549; Fri, 8 Oct 1999 14:31:30 +0100 (BST) (envelope-from mark) Date: Fri, 8 Oct 1999 14:31:29 +0100 From: Mark Ovens To: David Proffitt Cc: "freebsd-questions@freebsd.org" Subject: Re: ld.so and Netscape Message-ID: <19991008143129.B316@marder-1> References: <37FDE561.368ED9F6@mds.qmw.ac.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37FDE561.368ED9F6@mds.qmw.ac.uk> Organization: Total lack of Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 01:36:49PM +0100, David Proffitt wrote: > Hello > > I installed Netscape Communicator from the packages collection (under > freeBSD 3.2) > > When I try to run it I get an error: > > Couldn't open /usr/libexec/ld.so > > One of my colleagues installed a different set of packages and Netscape > runs fine so I suppose this library must have been installed as a > dependency of something else? > > I have been through the packages but can't find anything that obviously > contains this file > > A pointer to how to get this working appreciated > Make sure you have installed the compat22 distribution. > -- > > David > > ====================================== > David Proffitt - Systems Programmer > St Bartholomew's and the Royal London > School of Medicine and Dentistry QMW > d.m.proffitt@mds.qmw.ac.uk > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- STATE-OF-THE-ART: Any computer you can't afford. OBSOLETE: Any computer you own. ________________________________________________________________ FreeBSD - The Power To Serve http://www.freebsd.org My Webpage http://ukug.uk.freebsd.org/~mark/ mailto:mark@ukug.uk.freebsd.org http://www.radan.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:33:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 46DFF14D87 for ; Fri, 8 Oct 1999 06:33:05 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11Za8q-0004fH-00; Fri, 8 Oct 1999 14:33:00 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA54197; Fri, 8 Oct 1999 14:32:55 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Fri, 8 Oct 1999 14:32:55 +0100 (BST) From: J McKitrick To: Sheldon Hearn Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-Reply-To: <56767.939376049@axl.noc.iafrica.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Well, in XF86Config, mouse protocol is PS/2 and port is /dev/mouse I don't recall seeing anything in rc.conf Maybe that's the problem. I really need to get down and dirty with all these config files. I ordered "The Complete FreeBSD" and i should get it today or tomorrow. I hope it covers this topic in depth. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:40:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 38DCE14E61 for ; Fri, 8 Oct 1999 06:40:52 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZaGB-000FTt-00; Fri, 08 Oct 1999 15:40:35 +0200 From: Sheldon Hearn To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-reply-to: Your message of "Fri, 08 Oct 1999 14:32:55 +0100." Date: Fri, 08 Oct 1999 15:40:34 +0200 Message-ID: <59512.939390034@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 08 Oct 1999 14:32:55 +0100, J McKitrick wrote: > Well, in XF86Config, > mouse protocol is PS/2 > and port is /dev/mouse > I don't recall seeing anything in rc.conf Maybe that's the problem. Maybe. :-) Check the FAQ entry on this one: http://www.freebsd.org/FAQ/x.html#X-AND-MOUSED Ciao, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:42:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 4C34914E61 for ; Fri, 8 Oct 1999 06:42:26 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id JAA06793; Fri, 8 Oct 1999 09:33:14 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Fri, 8 Oct 1999 09:33:14 -0400 (EDT) From: Alex V P To: David Proffitt Cc: "freebsd-questions@freebsd.org" Subject: Re: ld.so and Netscape In-Reply-To: <37FDE561.368ED9F6@mds.qmw.ac.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG install 2.2 compatibility and your problem is solved. /stand/sysinstall -> options 5 ( pos install configuration) -> D ( distribution) -> compat22 i hope helps alex On Fri, 8 Oct 1999, David Proffitt wrote: > Hello > > I installed Netscape Communicator from the packages collection (under > freeBSD 3.2) > > When I try to run it I get an error: > > Couldn't open /usr/libexec/ld.so > > One of my colleagues installed a different set of packages and Netscape > runs fine so I suppose this library must have been installed as a > dependency of something else? > > I have been through the packages but can't find anything that obviously > contains this file > > A pointer to how to get this working appreciated > > -- > > David > > ====================================== > David Proffitt - Systems Programmer > St Bartholomew's and the Royal London > School of Medicine and Dentistry QMW > d.m.proffitt@mds.qmw.ac.uk > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:42:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id 0C77714F71 for ; Fri, 8 Oct 1999 06:42:27 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11ZaHy-000NvU-00; Fri, 8 Oct 1999 14:42:26 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA54257; Fri, 8 Oct 1999 14:42:25 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Fri, 8 Oct 1999 14:42:25 +0100 (BST) From: J McKitrick To: Sheldon Hearn Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-Reply-To: <59512.939390034@axl.noc.iafrica.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG But i still find it strange that it's inconsistent. It doesn't always do this, but it's ONLY after a cold boot (from power off). AFter rebooting again, it's fine. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:43:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from serenity.mcc.ac.uk (serenity.mcc.ac.uk [130.88.200.93]) by hub.freebsd.org (Postfix) with ESMTP id 9CEFB150CE for ; Fri, 8 Oct 1999 06:43:48 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by serenity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11ZaJH-0005Bk-00; Fri, 8 Oct 1999 14:43:47 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id OAA54266; Fri, 8 Oct 1999 14:43:47 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Fri, 8 Oct 1999 14:43:47 +0100 (BST) From: J McKitrick To: Sheldon Hearn Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-Reply-To: <59512.939390034@axl.noc.iafrica.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Also, i just checked the web page. I can try that, but i don't use multiple mouse windows. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 6:49: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from axl.noc.iafrica.com (axl.noc.iafrica.com [196.31.1.175]) by hub.freebsd.org (Postfix) with ESMTP id 6AA3914FEF for ; Fri, 8 Oct 1999 06:48:53 -0700 (PDT) (envelope-from sheldonh@axl.noc.iafrica.com) Received: from sheldonh (helo=axl.noc.iafrica.com) by axl.noc.iafrica.com with local-esmtp (Exim 3.037 #1) id 11ZaO2-000FWY-00; Fri, 08 Oct 1999 15:48:42 +0200 From: Sheldon Hearn To: David Proffitt Cc: "freebsd-questions@freebsd.org" Subject: Re: ld.so and Netscape In-reply-to: Your message of "Fri, 08 Oct 1999 13:36:49 +0100." <37FDE561.368ED9F6@mds.qmw.ac.uk> Date: Fri, 08 Oct 1999 15:48:42 +0200 Message-ID: <59677.939390522@axl.noc.iafrica.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 08 Oct 1999 13:36:49 +0100, David Proffitt wrote: > When I try to run it I get an error: > > Couldn't open /usr/libexec/ld.so This question is answered in the FreeBSD FAQ. Please see: http://www.freebsd.org/FAQ/applications.html#AEN1471 Thanks, Sheldon. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 7:10: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from ctbsonline.com (Qnet00-108.qni.com [209.126.0.108]) by hub.freebsd.org (Postfix) with SMTP id BDF9015115 for ; Fri, 8 Oct 1999 07:10:01 -0700 (PDT) (envelope-from campbellj@ctbsonline.com) Received: from CTBSJEREMY [216.63.5.82] by ctbsonline.com (SMTPD32-4.07) id AA715460002E; Fri, 08 Oct 1999 09:06:41 CDT From: "Jeremy Campbell" To: Subject: FreeBSD Backup Date: Fri, 8 Oct 1999 09:04:23 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.5600 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have a single FreeBSD machine, and a NT machine. The NT machine has a DLT tape drive. I would like to use it to backup my FreeBSD machine. Is there any way to do this and have the backup retain the permission information of the files/directories? I could make a Samba share of "/" and back it up over that, but if I needed to restore the files, would they have the same permissions as they had whenever I backed them up? What is normal procedure in a situation such as this? Thanks, Jeremy Campbell CompuTech Business Solutions http://www.ctbsonline.com Faith Community Church http://www.faithcommunity.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 7:38:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail-out.visi.com (kauket.visi.com [209.98.98.22]) by hub.freebsd.org (Postfix) with ESMTP id 8A1FA15282 for ; Fri, 8 Oct 1999 07:38:50 -0700 (PDT) (envelope-from jstock@visi.com) Received: from isis.visi.com (isis.visi.com [209.98.98.8]) by mail-out.visi.com (Postfix) with ESMTP id 917C2370D; Fri, 8 Oct 1999 09:38:49 -0500 (CDT) Received: from localhost (jstock@localhost) by isis.visi.com (8.8.8/8.8.8) with ESMTP id JAA12143; Fri, 8 Oct 1999 09:38:49 -0500 (CDT) X-Authentication-Warning: isis.visi.com: jstock owned process doing -bs Date: Fri, 8 Oct 1999 09:38:49 -0500 (CDT) From: "Jeremy L. Stock" To: Sebastian Lederer Cc: freebsd-questions@FreeBSD.ORG Subject: Re: cdrecord question In-Reply-To: <37FD965D.2254E953@inf.fh-rhein-sieg.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Sebastian Lederer wrote: >You probably also need /dev/xpt0 , and "device xpt0" and "device pass0" >in your kernel config, if it's not already there. > >(BTW, the /dev/ssc device does not exist anymore (since FreeBSD 3.0), >and even before that, it was not really useful) > >Hope this helps, > >- Sebastian Lederer > > That did the trick. I'm new to SCSI and although I tried the man pages, I'm not sure how long it would've taken me to discover this on my own. Thanks! -- Jeremy L. Stock ICQ 46329337 Fax # 612-629-6540 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 8:26:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pebkac.owp.csus.edu (pebkac.owp.csus.edu [130.86.232.245]) by hub.freebsd.org (Postfix) with ESMTP id 6CC7914BFA for ; Fri, 8 Oct 1999 08:26:15 -0700 (PDT) (envelope-from joseph.scott@owp.csus.edu) Received: from owp.csus.edu (mothra.ecs.csus.edu [130.86.76.220]) by pebkac.owp.csus.edu (8.9.3/8.9.3) with ESMTP id IAA87342; Fri, 8 Oct 1999 08:24:44 -0700 (PDT) Message-ID: <37FE0CB8.79FB0E5C@owp.csus.edu> Date: Fri, 08 Oct 1999 15:24:40 +0000 From: Joseph Scott Organization: Water Programs - CSU Sacramento X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.0.36 i386) X-Accept-Language: en MIME-Version: 1.0 To: Mark Ovens Cc: Rob Hurle , freebsd-questions@FreeBSD.ORG Subject: Re: StarOffice 5.1 References: <19991008142948.A316@marder-1> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Check out : http://www.serv.net/~mcglk/staroffice-install.html On my 3.3 system following the above I was able to get through the install ( with the /net option ). However I ran into the infinite setup problem. Even after I've successfully run the install, everytime I try and run it the install comes up again. This happens if I run it as a normal user or as root. I don't know if this is something I may have screwed up, but try the steps recommended at the above web site and let me know if you get the infinite setup problem also. Mark Ovens wrote: > > On Fri, Oct 08, 1999 at 05:48:23PM +1000, Rob Hurle wrote: > > SUN has recently bought StarOffice, and they now have a CD of > > version 5.1 available (for "free"). This loads under Redhat Linux, > > version 5.1 using a neat X-windows interface. However, it will not begin > > under FreeBSD. I have installed FreeBSD 3.3 and the linux_base-5.2 > > package. I've tried setting up > > > > /lib -> /usr/compat/linux/lib > > > > (and even putting /lib in the ldconfig hints file). However, all I ever > > get is: > > > > setup.bin: error in loading shared libraries > > libvos517li.so: cannot open shared object file: No such file or > > directory > > > > Ugh. I was getting the same/similar error about the same file but > without having installed linux_base. Now I'm having problems > installing that (from the ports) :(. Seems like it won't solve my > problem. > > If/when you get the solution will you please be sure to post it to > the list, or to me privately. > > Thanks. > > > The setup program unpacks stuff into /tmp - including lots of shared > > libraries, one being this libvos517li.so (anything with 517 seems to refer > > to version 5.1.7 of StarOffice). This one refers to other libraries, etc. > > > > Has anyone got any further with this, or any clues? Thanks. > > -- Joseph Scott joseph.scott@owp.csus.edu Office Of Water Programs - CSU Sacramento To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 8:33:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from caffeine.public.hq.nasa.gov (caffeine.public.hq.nasa.gov [198.116.65.40]) by hub.freebsd.org (Postfix) with ESMTP id 65F3214D26 for ; Fri, 8 Oct 1999 08:33:16 -0700 (PDT) (envelope-from kreis@mail.hq.nasa.gov) Received: from ronin.ccd (shihonage.gsfc.nasa.gov [128.183.189.77]) by caffeine.public.hq.nasa.gov (8.7.5/8.7.3) with SMTP id LAA08404 for ; Fri, 8 Oct 1999 11:10:21 -0400 (EDT) Message-Id: <3.0.5.32.19991008113522.007c0330@mail.hq.nasa.gov> X-Sender: kreis@mail.hq.nasa.gov X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Fri, 08 Oct 1999 11:35:22 -0400 To: freebsd-questions@freebsd.org From: Kevin Reis Subject: Toshiba Portege 3010 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >>Hello, >> I have several installation questions RE the Toshiba Portege 3010/3015 >> (same machine different model numbers). I have searched for answers on the >> PAO website/faq and the freebsd website, no luck. If however, these >> questions have already been asked answered , my aplogies and I'll accept >> flaming as the price of getting some answers :). >> >> I atttempting to install FreeBSD-3.2 on a Toshiba Portege 3010 (only >> modification is that I've added 64M of RAM for a total of 96M) using either >> a Panasonic KXL-D740 PCMCIA Drive (the PC card is a Qlogic FAS card) or a >> Megahertz 10BT PC Card. >> >> I'm using the PAO release 3.2 kern.flp and mfsroot.flp to boot and begin >> the install process. >> >> When I get to kernel config, I have 17 conflicts, most are easely resolved >> (uneeded drivers, etc) however I have to change the memory port for my >> Megahertz card to 0x3e2 in order to avoid conflicting with my built in >> sound card (Yamaha OPL3) and I get 2 pcic0 entries, only 1 of which is >> assigned IRQ 11 (no probelm delete the other) and 2 pcici1 entries (no IRQ >> assigned) I have used multiple combinations of driver deletions and have >> gotten the laptop to boot into sysinstall. At the PC Card Controller >> Screens I have excluded IRQ 5 (being used by sound card) and used the >> default memory space. Using VT2 I've observed FreeBSD recognizing my >> Megahertz card as sn0 and assigning IRQ3. My Panasonic/Qlogic SCSI card is >> NOT recognized, although the kerenl knows its inserted. >> >> I go into novice install, creat my slice and setup my partitions (No >> Problem :). When I go to install from a local ftp server, ftp won't work. >> IFCONFIG -A tells me that sn0 is up and running. When I try to ping my >> laptop from the ftp server (5 feet away) I get 100% packet loss. >> >> I'm STUCK and need help. I would like to transition to FreeBSD from Linux, >> however, if I can't get my hardware to work I will have to set aside >> FreeBSd and concentrate on Linux, due the greater amount of driver support >> (something I would prefer NOT to do) >> >> Thanks in advance and I will gladly accept being told I'm a goofball and >> missed something teribly obvious in return for getting my laptop up and >> running. >> >> Kevin Reis To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 8:40:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 64E8715332 for ; Fri, 8 Oct 1999 08:40:41 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id IAA25033; Fri, 8 Oct 1999 08:59:55 -0700 (PDT) Date: Fri, 8 Oct 1999 08:59:55 -0700 (PDT) From: Alfred Perlstein To: Jeremy Campbell Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD Backup In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Jeremy Campbell wrote: > I have a single FreeBSD machine, and a NT machine. The NT machine has a DLT > tape drive. I would like to use it to backup my FreeBSD machine. Is there > any way to do this and have the backup retain the permission information of > the files/directories? I could make a Samba share of "/" and back it up > over that, but if I needed to restore the files, would they have the same > permissions as they had whenever I backed them up? It would more than likely fubar them in a bad way, you should check out dump/restore, they can create files that you can send to the NT server to backup, they will retain just about all the filesystem information you need to do a proper restore. > What is normal procedure in a situation such as this? dump/restore or a commercial backup program. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 9:15:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from huey.nawcad.navy.mil (huey.nawcad.navy.mil [192.58.199.10]) by hub.freebsd.org (Postfix) with ESMTP id 862FC14FC2 for ; Fri, 8 Oct 1999 09:15:14 -0700 (PDT) (envelope-from garnernp@ameritel.net) Received: by huey.nawcad.navy.mil; id MAA19687; Fri, 8 Oct 1999 12:15:13 -0400 (EDT) Received: from unknown(140.229.140.123) by huey.nawcad.navy.mil via smap (V4.2) id xma019516; Fri, 8 Oct 99 12:14:43 -0400 Message-ID: <37FE1864.F9DACBDE@ameritel.net> Date: Fri, 08 Oct 1999 12:14:29 -0400 From: Neil Garner Organization: Naval Air Warfare Center X-Mailer: Mozilla 4.6 [en] (Win98; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: disc1.img Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am currently downloading the file "disc1.img" from the BSD web server. question: what do I do with it after I download it? I found no reference to it in the installation manuals. Thanks. Neil P. Garner To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 9:16: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from maine.60north.net (maine.60north.net [198.143.201.10]) by hub.freebsd.org (Postfix) with ESMTP id 5DBE6153ED for ; Fri, 8 Oct 1999 09:15:57 -0700 (PDT) (envelope-from ankzt@maine.60north.net) Received: from localhost (ankzt@localhost) by maine.60north.net (8.9.3/8.9.2) with ESMTP id MAA85357; Fri, 8 Oct 1999 12:13:37 -0400 (EDT) (envelope-from ankzt@maine.60north.net) Date: Fri, 8 Oct 1999 12:13:37 -0400 (EDT) From: Bill To: Ruslan Ermilov Cc: Edirol , freebsd-questions@FreeBSD.ORG Subject: Re: natd - ping crash In-Reply-To: <19991008092355.G54236@relay.ucb.crimea.ua> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a very serious bug/security issue with natd, ping -r will simply reboot freebsd if your running natd , ive seen no sign of pannic. A friend of mine discovered this in 2.6 release & it has since carried over. Since I have been aware of it ive used IPFW deny ipopt rr since this can be done over any networks to any fbsd machine using natd. On Fri, 8 Oct 1999, Ruslan Ermilov wrote: > On Fri, Oct 08, 1999 at 12:14:27AM -0400, Edirol wrote: > > Hi, > > > > I'm running natd on a 3.3R system with the following command line > > options -s -m -u > > > > When I ping -R my box from another computer, after a while the system > > reboots itself. > > > Reboots or panics? > > -- > Ruslan Ermilov Sysadmin and DBA of the > ru@ucb.crimea.ua United Commercial Bank, > ru@FreeBSD.org FreeBSD committer, > +380.652.247.647 Simferopol, Ukraine > > http://www.FreeBSD.org The Power To Serve > http://www.oracle.com Enabling The Information Age > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 9:28:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 05E9C14FC2 for ; Fri, 8 Oct 1999 09:28:18 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id JAA26280; Fri, 8 Oct 1999 09:47:32 -0700 (PDT) Date: Fri, 8 Oct 1999 09:47:32 -0700 (PDT) From: Alfred Perlstein To: Neil Garner Cc: freebsd-questions@FreeBSD.ORG Subject: Re: disc1.img In-Reply-To: <37FE1864.F9DACBDE@ameritel.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Neil Garner wrote: > I am currently downloading the file "disc1.img" from the BSD web > server. question: what do I do with it after I download it? I found > no reference to it in the installation manuals. Burn it to a cdrom, it's the install image. You'll probably want to grab the kernel and mfsroot floppies as well. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 9:58:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from newt.wiznet.ca (newt.wiznet.ca [216.13.71.13]) by hub.freebsd.org (Postfix) with ESMTP id 20B6115838 for ; Fri, 8 Oct 1999 09:58:21 -0700 (PDT) (envelope-from scopplestone@wiznet.ca) Received: from ntwkstn (shaun.wiznet.ca [209.82.57.21]) by newt.wiznet.ca (8.8.7/8.8.8) with SMTP id MAA04018 for ; Fri, 8 Oct 1999 12:58:12 -0400 (EDT) (envelope-from scopplestone@wiznet.ca) From: "Shaun" To: Subject: RE: natd - ping crash Date: Fri, 8 Oct 1999 13:00:55 -0400 Message-ID: <002501bf11ae$af4bb7e0$153952d1@ntwkstn.wiznet.ca> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Question... I keep getting this error appearing every so often in the messages log - natd[101]: failed to write packet back (Host is down) Can anyone tell me what this relates to and how I can track it down? I just finished upgrading to the latest 3.3 release. Thanks, Shaun To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:18:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id 2C74414BD2 for ; Fri, 8 Oct 1999 10:18:17 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.251]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id MAA70369; Fri, 8 Oct 1999 12:17:12 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <008801bf11b0$f2653ae0$fba3f9cf@megared.net.mx> Reply-To: "Alejandro Ramirez" From: "Alejandro Ramirez" To: "Alex V P" , Cc: References: <37FD5D3C.68EA3FAB@home.com> <37FD60F5.FA8C925B@big-blue.net> Subject: RE: success...and failure Date: Fri, 8 Oct 1999 12:17:06 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Run /usr/X11R6/bin/SuperProbe to see what type of card you have, and the ammount of memory in it, then: Alex V P wrote: > start /usr/X11R6/bin/XF86Setup to configure X in graphical mode > what kind of card do you have? at boot time at least you can read what card > do you have ;-)) > have fun > alex Ales To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:21: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from neptun.big-blue.net (neptun1.big-blue.net [208.237.121.1]) by hub.freebsd.org (Postfix) with ESMTP id 3AD0F14BD2 for ; Fri, 8 Oct 1999 10:20:57 -0700 (PDT) (envelope-from alex@neptun.big-blue.net) Received: from localhost (alex@localhost) by neptun.big-blue.net (8.9.1/8.9.1) with ESMTP id NAA07063; Fri, 8 Oct 1999 13:11:48 -0400 (EDT) (envelope-from alex@neptun.big-blue.net) Date: Fri, 8 Oct 1999 13:11:48 -0400 (EDT) From: Alex V P To: Alejandro Ramirez Cc: whitehat@home.com, questions@FreeBSD.ORG Subject: RE: success...and failure In-Reply-To: <008801bf11b0$f2653ae0$fba3f9cf@megared.net.mx> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG thank you ales. i forgot about SuperProbe ;-))) alex On Fri, 8 Oct 1999, Alejandro Ramirez wrote: > Run /usr/X11R6/bin/SuperProbe to see what type of card you have, and the > ammount of memory in it, then: > > Alex V P wrote: > > > start /usr/X11R6/bin/XF86Setup to configure X in graphical mode > > what kind of card do you have? at boot time at least you can read what > card > > do you have ;-)) > > have fun > > alex > > Ales > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:23:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from studentmail.liu.se (student.liu.se [130.236.230.10]) by hub.freebsd.org (Postfix) with ESMTP id 173C414D7C for ; Fri, 8 Oct 1999 10:23:07 -0700 (PDT) (envelope-from johpe159@student.liu.se) Received: from student.liu.se (b152.ryd.student.liu.se [130.236.233.152]) by studentmail.liu.se (Postfix) with ESMTP id 65FAC5DD2F for ; Fri, 8 Oct 1999 19:23:02 +0200 (MET DST) Message-ID: <37FE28A9.567BDAC4@student.liu.se> Date: Fri, 08 Oct 1999 19:23:53 +0200 From: Johan Pettersson X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.3-19990909-RC i386) X-Accept-Language: sv, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: ipfw Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! 00001 160 6420 deny ip from xxx.xxx.xxx.xxx. to any how do I remove this entry ? I am trying to learn about firewall, but now I have locked my second machine out =) //Johan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:30:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 47D1A158D7 for ; Fri, 8 Oct 1999 10:30:29 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11ZeC6-000GZb-00 for questions@FreeBSD.ORG; Fri, 08 Oct 1999 17:52:38 +0000 Message-ID: <37FE2E8A.64E5640F@hackfurby.com> Date: Fri, 08 Oct 1999 12:49:00 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: questions@FreeBSD.ORG Subject: 3.3 RELEASE std libs ??? References: <37FD5D3C.68EA3FAB@home.com> <37FD60F5.FA8C925B@big-blue.net> <008801bf11b0$f2653ae0$fba3f9cf@megared.net.mx> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Okay can someone tell me what is the version for the standard libc in FreeBSD 3.3 is it libc or glibc and what release ???? -- Failure is not an option. It comes bundled with your Microsoft product. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:32:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chumbly.math.missouri.edu (chumbly.math.missouri.edu [128.206.72.12]) by hub.freebsd.org (Postfix) with ESMTP id F1F5414BC9 for ; Fri, 8 Oct 1999 10:32:35 -0700 (PDT) (envelope-from rich@chumbly.math.missouri.edu) Received: (from rich@localhost) by chumbly.math.missouri.edu (8.9.1a/8.9.1) id MAA23402 for freebsd-questions@freebsd.org; Fri, 8 Oct 1999 12:32:34 -0500 (CDT) From: Rich Winkel Message-Id: <199910081732.MAA23402@chumbly.math.missouri.edu> Subject: cdrecord problem To: freebsd-questions@freebsd.org Date: Fri, 8 Oct 1999 12:32:34 -0500 (CDT) X-Mailer: ELM [version 2.4 PL23] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'm trying to burn the 3.3 CD image to a Plextor PX-R412CS CD-R, which the documentation says is supported. The dummy write seemed to go fine, but the actual write bombed saying cdrecord: Data does not fit on current disk. Here are the dummy and actual runs, followed by dmesg output. Does anyone know what the problem is? henon# cdrecord -dummy -v speed=2 dev=6,0 3.3-install.cd0 Cdrecord release 1.8a29 Copyright (C) 1995-1999 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '6,0' scsibus: 0 target: 6 lun: 0 Using libscg version 'schily-0.1' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-R412C ' Revision : '1.04' Device seems to be: Generic mmc CD-R. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1168944 = 1141 KB FIFO size : 4194304 = 4096 KB Track 01: data 643 MB Total size: 739 MB (73:14.74) = 329606 sectors Lout start: 739 MB (73:16/56) = 329606 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is unrestricted Is not erasable ATIP start of lead in: -11580 (97:27/45) ATIP start of lead out: 333226 (74:05/01) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 9 Manufacturer: Kodak Japan Limited Blocks total: 333226 Blocks current: 333226 Blocks remaining: 3620 RBlocks total: 343358 RBlocks current: 343358 RBlocks remaining: 13752 Starting to write CD/DVD at speed 2 in dummy mode for single session. Last chance to quit, starting dummy write in 1 seconds. Waiting for reader process to fill input-buffer ... input-buffer ready. Starting new track at sector: 0 Track 01: 643 of 643 MB written (fifo 100%). Track 01: Total bytes read/written: 675028992/675028992 (329604 sectors). Writing time: 2204.761s Fixating... WARNING: Some drives don't like fixation in dummy mode. cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 09 00 00 00 00 0A 00 00 00 00 80 01 00 00 00 00 Sense Key: 0x9 Vendor Unique, Segment 0 Sense Code: 0x80 Qual 0x01 (vendor unique sense code 0x80) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 480s Fixating time: 0.089s cdrecord: fifo had 10633 puts and 10633 gets. cdrecord: fifo was 0 times empty and 10549 times full, min fill was 96%. henon# cdrecord -v speed=2 dev=6,0 3.3-install.cd0 Cdrecord release 1.8a29 Copyright (C) 1995-1999 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '6,0' scsibus: 0 target: 6 lun: 0 Using libscg version 'schily-0.1' atapi: 0 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC LINKED Vendor_info : 'PLEXTOR ' Identifikation : 'CD-R PX-R412C ' Revision : '1.04' Device seems to be: Generic mmc CD-R. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 1168944 = 1141 KB FIFO size : 4194304 = 4096 KB Track 01: data 643 MB Total size: 739 MB (73:14.74) = 329606 sectors Lout start: 739 MB (73:16/56) = 329606 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is unrestricted Is not erasable ATIP start of lead in: -11580 (97:27/45) ATIP start of lead out: 333226 (74:05/01) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 9 Manufacturer: Kodak Japan Limited Blocks total: 333226 Blocks current: 3470 Blocks remaining: -326136 cdrecord: WARNING: Data may not fit on current disk. RBlocks total: 343358 RBlocks current: 13602 RBlocks remaining: -316004 cdrecord: Data does not fit on current disk. ------------------dmesg--------------- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.3-STABLE #0: Tue Oct 5 17:42:59 CDT 1999 root@crayon:/u2/src/sys/compile/g6_da1 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 199432989 Hz CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xf9ff real memory = 67108864 (65536K bytes) avail memory = 62611456 (61144K bytes) Preloaded elf kernel "kernel" at 0xc0287000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc028709c. Pentium Pro MTRR support enabled Probing for devices on PCI bus 0: Correcting Natoma config for non-SMP chip0: rev 0x02 on pci0.0.0 chip1: rev 0x01 on pci0.7.0 ahc0: rev 0x00 int a irq 10 on pci0.11.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs xl0: <3Com 3c905-TX Fast Etherlink XL> rev 0x00 int a irq 9 on pci0.15.0 xl0: Ethernet address: 00:60:97:90:74:f4 xl0: autoneg complete, link status good (half-duplex, 10Mbps) vga0: rev 0x01 int a irq 11 on pci0.17.0Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model IntelliMouse, device ID 3 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface changing root device to da1s1a da1 at ahc0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C) da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 2049MB (4197405 512 byte sectors: 255H 63S/T 261C) cd0 at ahc0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present cd1 at ahc0 bus 0 target 6 lun 0 cd1: Removable CD-ROM SCSI-2 device cd1: 10.000MB/s transfers (10.000MHz, offset 8) cd1: Attempt to query device size failed: NOT READY, Medium not present To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:33:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from aag.alaskaair.com (outbound.alaskaair.com [159.49.42.191]) by hub.freebsd.org (Postfix) with SMTP id 9F18C14BC9 for ; Fri, 8 Oct 1999 10:33:04 -0700 (PDT) (envelope-from elazich@AlaskaAir.com) Received: from OUTBOUND.alaskaair.com by aag.alaskaair.com via smtpd (for hub.FreeBSD.org [204.216.27.18]) with SMTP; 8 Oct 1999 17:35:56 UT Received: from asnasta (asnasta.alaskaair.com [159.49.42.21]) by outbound.alaskaair.com (8.9.3/8.9.3) with SMTP id KAA21003; Fri, 8 Oct 1999 10:36:58 -0700 From: elazich@AlaskaAir.com To: johpe159@student.liu.se Cc: freebsd-questions@FreeBSD.ORG Date: Fri, 8 Oct 1999 10:31:11 -0700 Subject: Re: ipfw Message-ID: References: <37FE28A9.567BDAC4@student.liu.se> Organization: Alaska Airlines MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit Content-ID: X-Gateway: NASTA Gate 2.0 for FirstClass(R) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG ipfw delete 1 johpe159@student.liu.se writes: >Hello! >00001 160 6420 deny ip from xxx.xxx.xxx.xxx. to any >how do I remove this entry ? I am trying to learn about >firewall, but now I have locked my second machine out =) >//Johan >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:41:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lk.tempest.sk (lk.tempest.sk [195.28.100.47]) by hub.freebsd.org (Postfix) with ESMTP id C417314EE2 for ; Fri, 8 Oct 1999 10:41:15 -0700 (PDT) (envelope-from ludo_koren@tempest.sk) Received: (from koren@localhost) by lk.tempest.sk (8.9.3/8.9.3) id TAA06092; Fri, 8 Oct 1999 19:41:15 +0200 (CEST) (envelope-from koren) Date: Fri, 8 Oct 1999 19:41:15 +0200 (CEST) Message-Id: <199910081741.TAA06092@lk.tempest.sk> From: Ludo Koren To: freebsd-questions@freebsd.org Subject: Transfer of user accounts Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello. I want to transfer user accounts from FreeBSD 2.2.7-RELEASE to 3.3-STABLE. I grabbed /etc/master.passwd file and run pwd_mkdb -C /etc/master.passwd pwd_mkdb -p /etc/master.passwd There were no errors encountered. Afterwards, I am not able to login with new password nor old password. Please, point to me what I am doing wrong. Thanks. ludo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:52:41 1999 Delivered-To: freebsd-questions@freebsd.org Received: from arutam.inch.com (ns.inch.com [207.240.140.101]) by hub.freebsd.org (Postfix) with ESMTP id A990A14ED6 for ; Fri, 8 Oct 1999 10:52:34 -0700 (PDT) (envelope-from gener@ouryearbook.com) Received: from proxyplus.universe (TC5-dial-78-142.oldslip.inch.com [207.240.142.78]) by arutam.inch.com (8.9.3/8.9.3/UTIL-INCH-2.0.0) with SMTP id NAA16798 for ; Fri, 8 Oct 1999 13:52:33 -0400 (EDT) Received: from 3.105.117.10 by Proxy+; Fri, 08 Oct 1999 17:51:21 GMT From: "Gene Raytsin" To: Subject: natd Date: Fri, 8 Oct 1999 13:52:33 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hey, got a question if I use natd with pppd what interface i should use with it? ppp0 or xl0? and what about ipfw add divert ...via ? thanks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:53:59 1999 Delivered-To: freebsd-questions@freebsd.org Received: from amukta.gci.net (amukta.gci.net [208.138.130.216]) by hub.freebsd.org (Postfix) with ESMTP id 0382E14F33 for ; Fri, 8 Oct 1999 10:53:55 -0700 (PDT) (envelope-from irisinc@gci.net) Received: from gci.net ([209.165.137.56]) by amukta.gci.net (Netscape Messaging Server 4.04 Jul 21 1999 18:33:18) with ESMTP id FJAPNK03.R18 for ; Fri, 8 Oct 1999 09:52:32 -0800 Message-ID: <37FF80D3.79DCC75B@gci.net> Date: Sat, 09 Oct 1999 09:52:19 -0800 From: Rusty X-Mailer: Mozilla 4.51 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: "questions@FreeBSD.ORG" Subject: Printing Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I am having a problem setting up my LaserJet 6MP toprint under freeBSD. I installed the apsfilter port as advised in an eariler post. I had to change the source page as Andres Klemm has moved his page from where it used to be found in the Makefile. I am following the instructions found in Greg Lehey's book "The Complete FreeBSD". On page 294 it says to issue the command lptest > /dev/lpt0 to test the printer. When I do this my printer starts up and produces four (4) blank pages. I suspect that I am getting the staircase effect and the printer is printing off the page. On page 296 are instructions for curing this problem. It talks about a source file /book/scripts/libfilter.c that needs to be compiled and installed in /user/local/libexec/lpfilter. I must have missed something here as neither I nor the locate command can find this source file. If anyone would please be so kind as to point out where I may find the above mentioned file, please respond. Rusty To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:54:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 28B8D14A12 for ; Fri, 8 Oct 1999 10:54:35 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id MAA72868; Fri, 8 Oct 1999 12:54:23 -0500 (CDT) (envelope-from dan) Date: Fri, 8 Oct 1999 12:54:23 -0500 From: Dan Nelson To: TrouBle Cc: questions@FreeBSD.ORG Subject: Re: 3.3 RELEASE std libs ??? Message-ID: <19991008125423.A72805@dan.emsphone.com> References: <37FD5D3C.68EA3FAB@home.com> <37FD60F5.FA8C925B@big-blue.net> <008801bf11b0$f2653ae0$fba3f9cf@megared.net.mx> <37FE2E8A.64E5640F@hackfurby.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37FE2E8A.64E5640F@hackfurby.com> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 08), TrouBle said: > Okay can someone tell me what is the version for the standard libc in > FreeBSD 3.3 /usr/lib/libc.so.3 > is it libc or glibc and what release ???? No. It uses a completely different libc from Linux. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 10:57: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cx952600-a.fed1.sdca.home.com (cx952600-a.fed1.sdca.home.com [24.4.90.90]) by hub.freebsd.org (Postfix) with ESMTP id D910514D75 for ; Fri, 8 Oct 1999 10:57:01 -0700 (PDT) (envelope-from snoonan@cx952600-a.fed1.sdca.home.com) Received: from localhost (snoonan@localhost) by cx952600-a.fed1.sdca.home.com (8.9.3/8.9.3) with ESMTP id KAA00644; Fri, 8 Oct 1999 10:56:31 GMT (envelope-from snoonan@cx952600-a.fed1.sdca.home.com) Date: Fri, 8 Oct 1999 10:56:31 +0000 (GMT) From: Sean Noonan To: freebsd-questions@FreeBSD.ORG Cc: snoonan@cx952600-a.fed1.sdca.home.com Subject: need help with natd Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Greetings Wise FreeBSD Gurus: I can't seem to figure out how to accomplish what I want to do. Can any one help? I'm running 3.2-RELEASE. The machine is multihomed. NIC1 = xl0 = RFC1918 internal net (192.168.1/24). NIC2 = xl1 = cable modem IP (24.4.90.90). I want to be able to connect to PCAnywhere running on an internal NT machine (192.168.1.2) from my workstation at work (e.f.g.h). I'm running natd and ipfw. PCAnywhere apparently uses UDP ports 5631 and 5632 (but I've also seen connection traffic on UDP port 22 which I thought was for SSH, but I digress). I thought all I would have to do is: natd -n -xl1 -l -redirect_port udp 192.168.1.2:22 natd -n -xl1 -l -redirect_port udp 192.168.1.2:5631 natd -n -xl1 -l -redirect_port udp 192.168.1.2:5632 There we no errors from entering these commands. IPFW started complaining about Denying packets, so I [temporarily] alleviated that problem by issuing: ipfw add 5 allow ip from any to any Still no luck though. PCAnywhere on my work machine just times out trying to find a connection. Can anyone shed some light on what I've done wrong? I'm still pretty much a newbie, so if I forgot to include some information necessary for figuring out the puzzle please forgive me in advance. And yes, I'm aware of other alternatives such as VNC. I really want this particular scenario to work, though. Thanks in advance, -Sean Noonan snoonan@cx952600-a.fed1.sdca.home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 11: 3:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from arutam.inch.com (ns.inch.com [207.240.140.101]) by hub.freebsd.org (Postfix) with ESMTP id 8677014DE0 for ; Fri, 8 Oct 1999 11:03:52 -0700 (PDT) (envelope-from gener@ouryearbook.com) Received: from proxyplus.universe (TC5-dial-78-142.oldslip.inch.com [207.240.142.78]) by arutam.inch.com (8.9.3/8.9.3/UTIL-INCH-2.0.0) with SMTP id OAA18775 for ; Fri, 8 Oct 1999 14:03:51 -0400 (EDT) Received: from 3.105.117.10 by Proxy+; Fri, 08 Oct 1999 18:01:55 GMT From: "Gene Raytsin" To: Subject: 3.3 tags Date: Fri, 8 Oct 1999 14:03:08 -0400 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi what are the tags for 3.3-release and 3.3-stable ? thanks gene To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 11:11:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chopin.ombuds.siu.edu (chopin.ombuds.siu.edu [131.230.217.1]) by hub.freebsd.org (Postfix) with SMTP id 0F2F314DD4 for ; Fri, 8 Oct 1999 11:11:14 -0700 (PDT) (envelope-from parrothd@midwest.net) Received: from [207.250.168.4] by chopin.ombuds.siu.edu id aa19229; 8 Oct 1999 13:08 CDT Message-Id: <3.0.5.32.19991008130648.009a7320@midwest.net> X-Sender: parrothd@midwest.net X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Fri, 08 Oct 1999 13:06:48 -0500 To: Sean Noonan From: "Jonathan E. Lyons" Subject: Re: need help with natd Cc: freebsd-questions@freebsd.org In-Reply-To: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I think you'r missing some of the redirect command? I just created a config file with the following, and start NATD by; natd -interface ed1 -dynamic -config /etc/natd.conf $ more natd.conf redirect_port tcp 192.168.1.20:2000 2000 redirect_port tcp 192.168.1.20:2001 2001 redirect_port tcp 192.168.1.20:2002 2002 redirect_port tcp 192.168.1.20:2003 2003 redirect_port tcp 192.168.1.20:2004 2004 redirect_port tcp 192.168.1.20:2005 2005 redirect_port tcp 192.168.1.20:2006 2006 redirect_port tcp 192.168.1.20:2007 2007 redirect_port tcp 192.168.1.20:2008 2008 redirect_port tcp 192.168.1.20:2009 2009 redirect_port tcp 192.168.1.20:2010 2010 redirect_port tcp 192.168.1.20:2011 2011 redirect_port tcp 192.168.1.20:2012 2012 redirect_port tcp 192.168.1.20:2013 2013 redirect_port tcp 192.168.1.20:2014 2014 redirect_port tcp 192.168.1.20:2015 2015 redirect_port udp 192.168.1.20:2213 2213 redirect_port tcp 192.168.1.20:21 2121 redirect_port udp 192.168.1.20:21 2121 redirect_port tcp 192.168.1.20:47624 47624 This redirects all TCP traffic to 192.168.1.20 port 20??, for my ICQ stuff... At 10:56 AM 10/8/99 +0000, you wrote: >Greetings Wise FreeBSD Gurus: > >I can't seem to figure out how to accomplish what I want to do. Can any >one help? > >I'm running 3.2-RELEASE. The machine is multihomed. NIC1 = xl0 = RFC1918 >internal net (192.168.1/24). NIC2 = xl1 = cable modem IP (24.4.90.90). > >I want to be able to connect to PCAnywhere running on an internal NT >machine (192.168.1.2) from my workstation at work (e.f.g.h). > >I'm running natd and ipfw. > >PCAnywhere apparently uses UDP ports 5631 and 5632 (but I've also seen >connection traffic on UDP port 22 which I thought was for SSH, but I >digress). > >I thought all I would have to do is: > >natd -n -xl1 -l -redirect_port udp 192.168.1.2:22 >natd -n -xl1 -l -redirect_port udp 192.168.1.2:5631 >natd -n -xl1 -l -redirect_port udp 192.168.1.2:5632 > >There we no errors from entering these commands. > >IPFW started complaining about Denying packets, so I [temporarily] >alleviated that problem by issuing: > >ipfw add 5 allow ip from any to any > >Still no luck though. PCAnywhere on my work machine just times out trying >to find a connection. > >Can anyone shed some light on what I've done wrong? I'm still pretty much >a newbie, so if I forgot to include some information necessary for >figuring out the puzzle please forgive me in advance. > >And yes, I'm aware of other alternatives such as VNC. I really want this >particular scenario to work, though. > >Thanks in advance, > >-Sean Noonan >snoonan@cx952600-a.fed1.sdca.home.com > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Jonathan E. Lyons parrothd@midwest.net Nucleus Consulting ICQ # 14226912 www.nucleusconsulting.com Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD! Pager # 7732511967@mobile.att.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 11:12:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from orion.ac.hmc.edu (Orion.AC.HMC.Edu [134.173.32.20]) by hub.freebsd.org (Postfix) with ESMTP id 493A814DD4 for ; Fri, 8 Oct 1999 11:12:29 -0700 (PDT) (envelope-from brooks@one-eyed-alien.net) Received: from localhost (brdavis@localhost) by orion.ac.hmc.edu (8.8.8/8.8.8) with ESMTP id LAA17344; Fri, 8 Oct 1999 11:12:25 -0700 (PDT) X-Authentication-Warning: orion.ac.hmc.edu: brdavis owned process doing -bs Date: Fri, 8 Oct 1999 11:12:24 -0700 (PDT) From: Brooks Davis X-Sender: brdavis@orion.ac.hmc.edu To: Gene Raytsin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: 3.3 tags In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Gene Raytsin wrote: > what are the tags for 3.3-release and 3.3-stable ? 3.3-RELEASE is RELENG_3_3_0_RELEASE 3-STABLE is RELENG_3 -- Brooks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 11:41: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rmc1.crocker.com (rmc1.crocker.com [204.97.12.50]) by hub.freebsd.org (Postfix) with ESMTP id 6A24114A25 for ; Fri, 8 Oct 1999 11:41:04 -0700 (PDT) (envelope-from jay@heliosonline.com) Received: from pdp20 (ip101-42.dialup.crocker.net [140.186.101.42]) by rmc1.crocker.com (8.9.3/8.9.3) with SMTP id OAA22082; Fri, 8 Oct 1999 14:31:32 -0400 Reply-To: From: "Roland Jay Roberts" To: "J McKitrick" Cc: "FreeBSD Questions" Subject: RE: mouse lockup in X Date: Fri, 8 Oct 1999 14:26:15 -0400 Message-ID: <000601bf11ba$9b1950a0$050a0a0a@helios> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2377.0 In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Sometimes when i start FBSD, the mouse won't work in windowmaker. Other > times it is fine. Starting X again or logging out and back in don't work. > Only a reboot cures it. ANy ideas? > FBSD 3.2 Toshiba Satellite laptop with PS/2 mouse Could the power management be shutting the mouse port down after some inactivity? I know that APM can sometimes mess up serial ports when it does this, requiring a reboot. // Jay Roberts // HELIOS Custom Training, Inc. // mailto:jay@heliosonline.com // http://www.heliosonline.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 11:42: 4 1999 Delivered-To: freebsd-questions@freebsd.org Received: from emcmail.lss.emc.com (emcmail.lss.emc.com [168.159.48.78]) by hub.freebsd.org (Postfix) with ESMTP id 8F70914FB5 for ; Fri, 8 Oct 1999 11:42:00 -0700 (PDT) (envelope-from joe_pepin@ins.com) Received: from pepinj ([168.159.204.214]) by emcmail.lss.emc.com (8.9.3/8.9.3) with SMTP id OAA27597 for ; Fri, 8 Oct 1999 14:41:54 -0400 (EDT) From: "Joe Pepin" To: "FBSDQuestion" Subject: Where (in the source) do PIDs get set? Date: Fri, 8 Oct 1999 14:43:12 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, all. I'd like to start poking around in the source to start learning what's up. My first question is- where do I look to find the piece of code that sets a processes' PID? I've grepped and grepped, but with no real luck. I'm interested in seeing how hard it would be to randomize those like in OpenBSD. TIA, Joe Pepin ~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= Joe Pepin Network Systems Engineer Security Practice International Network Services http://www.ins.com/ “The Knowledge Behind the Network” The views/opinions expressed above are not necessarily those of my employer, but they probably should be. ~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 11:42: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from emcmail.lss.emc.com (emcmail.lss.emc.com [168.159.48.78]) by hub.freebsd.org (Postfix) with ESMTP id EA31D15037 for ; Fri, 8 Oct 1999 11:42:01 -0700 (PDT) (envelope-from joe_pepin@ins.com) Received: from pepinj ([168.159.204.214]) by emcmail.lss.emc.com (8.9.3/8.9.3) with SMTP id OAA27607 for ; Fri, 8 Oct 1999 14:41:55 -0400 (EDT) From: "Joe Pepin" To: "FBSDQuestion" Subject: Looking for reference for upgrading 3.2-R to 3.3-S. Date: Fri, 8 Oct 1999 14:43:13 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Importance: Normal Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, all. I am running FBSD 3.2-R on a machine with no network connection. It is about to get one, and I would like to know where I can go to read about exactly how to CVSup and make my upgrade to STABLE. I have The Complete FreeBSD (3Rd ed.) and it seems to go through how to do this for CURRENT very well, but I don't want to mess anything up, and am still a bit confused as to where exactly I should point cvs, and then what I'll need to watch out for. I am running vinum, and have done some customization to rc.local and whatnot. TIA, Joe Pepin ~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= Joe Pepin Network Systems Engineer Security Practice International Network Services http://www.ins.com/ “The Knowledge Behind the Network” The views/opinions expressed above are not necessarily those of my employer, but they probably should be. ~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~=~= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12: 5:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from barrow.uwaterloo.ca (barrow.uwaterloo.ca [129.97.140.32]) by hub.freebsd.org (Postfix) with ESMTP id F1BAF14DC7 for ; Fri, 8 Oct 1999 12:05:21 -0700 (PDT) (envelope-from acheng@barrow.uwaterloo.ca) Received: from localhost (acheng@localhost) by barrow.uwaterloo.ca (8.8.8/8.8.8) with SMTP id PAA15711 for ; Fri, 8 Oct 1999 15:05:20 -0400 (EDT) Date: Fri, 8 Oct 1999 15:05:19 -0400 (EDT) From: Ada To: freebsd-questions@FreeBSD.ORG Subject: Help with playing real audio directly from netscape Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am currently running FreeBSD 3.3 with linux-netscpe-communicator-4.61 (linux_emu enabled). I have also install raplayer 5.0 (linux elf) following the instructions given from RealAudio. I am able to play .rm file if they have first be downloaded. However when I try to play them directly, all I get is the real player screen. No title of the song appear and when I pree play nothing happen. (it seems that the raplayer doesn't have info on what file they are suppose to play) Has this been discuss before? I try searching through the mailing archives (newbies, questions and multimedia for keywords real audio netscape linux) but did not find any articles that discuss this situation. Any help will be greatly appreciated. Many thanks in advance. Ada P.S. I have a Yamaha sound card. cat /dev/sndstat gives the following info: pcm1 < yamaha sa2> at 0x530 irq 5 dma 0:1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12: 6:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id 0B91514DC7 for ; Fri, 8 Oct 1999 12:06:32 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.251]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id OAA08219; Fri, 8 Oct 1999 14:05:46 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <01c401bf11c0$1c8478e0$fba3f9cf@megared.net.mx> Reply-To: "Alejandro Ramirez" From: "Alejandro Ramirez" To: "Sean Noonan" , Cc: Subject: RV: PCAnywhere through natd/ipfw firewall gateway Date: Fri, 8 Oct 1999 14:05:39 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I had one mail in my personal archives that says something about this setup, it may help you out with this a little, see below: I hope this Helps... Ales ----- Original Message ----- From: Charles A. Peters To: Freebsd-Questions Sent: Tuesday, July 27, 1999 11:08 AM Subject: PCAnywhere through natd/ipfw firewall gateway > To all interested users! > > I have figured out how to connect to individual win95/win98 boxes on > the inside of a freebsd gateway. Here it goes: > > Configuration > > freebsd gateway with 2 nics > internal ip: 192.168.0.1 (gateway for win95/win98 clients) > external ip: 24.4.123.456 (the third and fourth octets are made up) > > win95/win98 boxes > ip: 192.168.0.101 > ip: 192.168.0.102 > on these boxes, the gateway points to 192.168.0.1 > > To connect to the win95/win98 box on the internal network from the > outside (freebsd.org for example), run pcanywhere 32 (I'm using > version 8.0) > > 1. create an icon to represent the host that you are trying to > connect to > > 2. right click the icon and go down to properties > > 3. select the connection info tab > > 4. enter the ip address for the gateway that you are trying to go > through in the field > labeled 'network host pc to control or ip address (for our example, > use 24.4.123.456) > > 5. select the 'connection info' tab > > 6. make sure that tcp/ip is selected > > 7. click on details button > > 8. check the box that says 'Use Gateway' > > 9. in the box labeled 'name', type in the internal ip address for the > machine that you wish to > connect to > > 7. the 'class' box should be left blank > > 8. the 'parity' box should be 'none' > > 9. click 'ok' button to return to the 'connection info' tab > > 10. click 'ok' button to save your changes > > You are now ready to go! > > BTW: PCAnywhere uses the following ports for connections: > > 5631 incoming traffic > 5632 outgoing traffic > > These are required if you are going through a firewall (ipfw). > > Currently, I'm working on a firewall, and I will post the firewall > options once I have figured them out. > > Thanks, > > Charles > > cpeters2@home.com > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12:24:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.webct.com (mail.webct.com [209.87.17.10]) by hub.freebsd.org (Postfix) with ESMTP id A301714EB0 for ; Fri, 8 Oct 1999 12:24:43 -0700 (PDT) (envelope-from dfoo@ca.webct.com) Received: from ca.webct.com (ws74.webct.com [209.87.17.104]) by mail.webct.com (8.9.3/8.9.3) with ESMTP id MAA56678 for ; Fri, 8 Oct 1999 12:24:42 -0700 (PDT) Message-ID: <37FE44FA.6EC5A8C9@ca.webct.com> Date: Fri, 08 Oct 1999 12:24:42 -0700 From: Darren Foo Reply-To: dfoo@webct.com Organization: ULT Canada X-Mailer: Mozilla 4.61 [en] (X11; U; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@freebsd.org Subject: StarOffice 5.1a w/ latest Linux Emulation Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Has anyone been able to successfully install the latest StarOffice with the latest Linux Emulation? I followed Ken's excellent instructions at: http://www.serv.net/~mcglk/staroffice-install.html But when I try to run soffice I get the resinstall/add/repair screen. I noticed that there isn't a linux_lib port anymore. And how come ld.so.conf still points to /i486-linux-aout and usr/winuser ? I also tried the HOWTO for 5.0 on freebsdrocks.com but that didn't work either. -- Darren Foo To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12:37:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from defiant.quansoo.com (defiant.quansoo.com [63.66.225.90]) by hub.freebsd.org (Postfix) with ESMTP id F036415928 for ; Fri, 8 Oct 1999 12:37:44 -0700 (PDT) (envelope-from cgriffiths@quansoo.com) Received: from localhost (cgriffiths@localhost) by defiant.quansoo.com (8.9.3/8.9.3) with ESMTP id PAA03235; Fri, 8 Oct 1999 15:37:56 -0400 (EDT) (envelope-from cgriffiths@quansoo.com) X-Authentication-Warning: defiant.quansoo.com: cgriffiths owned process doing -bs Date: Fri, 8 Oct 1999 15:37:56 -0400 (EDT) From: "Christopher T. Griffiths" To: Darren Foo Cc: freebsd-questions@FreeBSD.ORG Subject: Re: StarOffice 5.1a w/ latest Linux Emulation In-Reply-To: <37FE44FA.6EC5A8C9@ca.webct.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Absolutly, Just make sure you cvsup the latest ports and install: /usr/ports/emulators/linux_base and /usr/ports/devel/linux_devtools *Also this will help out if you are planning on using the linux version of Netscape 4.7. It requires you to have the linux rpm of xpm. I could only get Staroffice to work under my own home directory because of some weird permissions thing, even after I used that soffice shell script floating around. But as long as you follow the instructions on: http://www.serv.net/~mcglk/staroffice-install.html you should be ok. Chris On Fri, 8 Oct 1999, Darren Foo wrote: > Has anyone been able to successfully install the latest StarOffice with > the latest Linux Emulation? I followed Ken's excellent instructions at: > http://www.serv.net/~mcglk/staroffice-install.html > > But when I try to run soffice I get the resinstall/add/repair screen. I > noticed that there isn't a linux_lib port anymore. And how come > ld.so.conf still points to /i486-linux-aout and usr/winuser ? I also > tried the HOWTO for 5.0 on freebsdrocks.com but that didn't work either. > > > > > -- > Darren Foo > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > Christopher T. Griffiths Senior Network/Systems Administrator Quansoo Group Inc. cgriffiths@quansoo.com Phone: (302) 777-4141 Fax: (302) 777-4142 Mobile: (302) 521-3436 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12:52: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from misha.cisco.com (misha.cisco.com [171.69.206.50]) by hub.freebsd.org (Postfix) with ESMTP id E0719153FF for ; Fri, 8 Oct 1999 12:51:55 -0700 (PDT) (envelope-from mi@misha.cisco.com) Received: (from mi@localhost) by misha.cisco.com (8.9.3/8.9.1) id PAA57289; Fri, 8 Oct 1999 15:51:48 -0400 (EDT) (envelope-from mi) Message-Id: <199910081951.PAA57289@misha.cisco.com> Subject: Re: natd, ftp, two ethernet cards In-Reply-To: <99100722400700.00924@s097-cdm44.amar.tcac.net> from Joe Huddleston at "Oct 7, 1999 10:37:13 pm" To: Joe Huddleston Date: Fri, 8 Oct 1999 15:51:48 -0400 (EDT) Cc: questions@freebsd.org Reply-To: mi@aldan.algebra.com From: Mikhail Teterin X-Mailer: ELM [version 2.4ME+ PL60 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Joe Huddleston once wrote: > I am trying to set up a firewall for my home network, and am having > problems with natd and ipfw. Would it be possible for you to email me > a quick overview of what you did to get your gateway working? 1. Your in-house lan must use one of the designated private network numbers (see RFC 1918): 10.0.0.0 - 10.255.255.255 172.16.0.0 - 172.31.255.255 192.168.0.0 - 192.168.255.255 This simplifies things tremendously, because natd knows about this and needs no special tweaking in this case. 2. All of your private machines need to have the gateway machine as their default router (this is almost always the case). 3. Now here is my example. My gateway machine has two interfaces: ep0 - 10.10.0.2 - on the private LAN ep1 - 24.218.x.x - to the cable modem The relevant firewall rule is: ipfw -q add divert natd tcp from any to any via ep1 This means, that anything that tries to get out to the outside world should be diverted to the natd-service, where the NAT-daemon is listening. The natd's command line is "natd -n ep1 -u -s". That's it. 4. To do this nicely, through the /etc/rc.conf, I would: natd_enable="YES" natd_interface="ep1" natd_flags="-u -s" firewall_enable="YES" 5. I strongly urge you to set up other firewall rules to protect your LAN. The amount of probes my firewall reports sometimes shocks me. It will also help keep your curious Internet provider from figuring out what OS you are running -- there are reports of @Home, for example, checking this and denying support to anything other then Windoz or MAC. Consult /etc/rc.firewall for more... Hope, this helps. Yours, -mi P.S. I'm CC-ing this to questions, so that it is archived for future generations :) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12:52:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smena.tusur.ru (smena.tasur.edu.ru [212.192.120.110]) by hub.freebsd.org (Postfix) with ESMTP id 967DF15160 for ; Fri, 8 Oct 1999 12:48:12 -0700 (PDT) (envelope-from tigra@smena.tusur.ru) Received: (from tigra@localhost) by smena.tusur.ru (8.9.3/8.9.3) id DAA12139 for freebsd-questions@FreeBSD.ORG; Sat, 9 Oct 1999 03:45:17 +0800 (KRAST) (envelope-from tigra) From: Alexander Zverev Message-Id: <199910081945.DAA12139@smena.tusur.ru> Subject: ld.so problem To: freebsd-questions@FreeBSD.ORG Date: Sat, 9 Oct 1999 03:45:16 +0800 (KRAST) X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hello I install FreeBSD 3.2 RELEASE and what I got- some programs (unixgate for ex.) couldn`t start, here what I get when trying to start unixgate Couldn't open /usr/libexec/ld.so. there is no ld.so in /usr/libexec/ All I have with name ld.so is /usr/compat/linux/lib/ld.so. and that it. What I shall do to solve this problem? Where I can get ld.so? wbr tigra tigra@smena.tusur.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 12:57: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.webct.com (mail.webct.com [209.87.17.10]) by hub.freebsd.org (Postfix) with ESMTP id 8EAF915243 for ; Fri, 8 Oct 1999 12:57:04 -0700 (PDT) (envelope-from dfoo@ca.webct.com) Received: from ca.webct.com (ws74.webct.com [209.87.17.104]) by mail.webct.com (8.9.3/8.9.3) with ESMTP id MAA58033; Fri, 8 Oct 1999 12:57:00 -0700 (PDT) Message-ID: <37FE4C8C.C8DEF502@ca.webct.com> Date: Fri, 08 Oct 1999 12:57:00 -0700 From: Darren Foo Reply-To: dfoo@webct.com Organization: ULT Canada X-Mailer: Mozilla 4.7 [en] (X11; U; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: "Christopher T. Griffiths" , freebsd-questions@freebsd.org Subject: Re: StarOffice 5.1a w/ latest Linux Emulation References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "Christopher T. Griffiths" wrote: > > Absolutly, > > Just make sure you cvsup the latest ports and install: > > /usr/ports/emulators/linux_base > > and > > /usr/ports/devel/linux_devtools > I could only get Staroffice to work under my own home directory because of > some weird permissions thing, even after I used that soffice shell script > floating around. > > But as long as you follow the instructions on: > > http://www.serv.net/~mcglk/staroffice-install.html > Is devtools the same as linux_lib from before? I get all the way to installation and then I can't run it cuz I get the install screen again. -- Darren Foo =========================== WebCT Canada Information and Communication Systems To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 13: 1:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from chopin.ombuds.siu.edu (chopin.ombuds.siu.edu [131.230.217.1]) by hub.freebsd.org (Postfix) with SMTP id EDB401521E for ; Fri, 8 Oct 1999 13:01:06 -0700 (PDT) (envelope-from parrothd@midwest.net) Received: from [207.250.168.57] by chopin.ombuds.siu.edu id aa19437; 8 Oct 1999 14:59 CDT Message-Id: <3.0.5.32.19991015145721.0099f100@midwest.net> X-Sender: parrothd@midwest.net X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.5 (32) Date: Fri, 15 Oct 1999 14:57:21 -0500 To: Alexander Zverev , freebsd-questions@freebsd.org From: "Jonathan E. Lyons" Subject: Re: ld.so problem In-Reply-To: <199910081945.DAA12139@smena.tusur.ru> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG First start by search the mailling archives, this tells you to.. Install the compat22 distribution in the sysinstall untility... At 03:45 AM 10/9/99 +0800, Alexander Zverev wrote: >hello >I install FreeBSD 3.2 RELEASE and what I got- some programs (unixgate for ex.) couldn`t >start, here what I get when trying to start unixgate >Couldn't open /usr/libexec/ld.so. > >there is no ld.so in /usr/libexec/ >All I have with name ld.so is /usr/compat/linux/lib/ld.so. and that it. > >What I shall do to solve this problem? Where I can get ld.so? > > >wbr tigra >tigra@smena.tusur.ru > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe freebsd-questions" in the body of the message > > Jonathan E. Lyons parrothd@midwest.net Nucleus Consulting ICQ # 14226912 www.nucleusconsulting.com Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD! Pager # 7732511967@mobile.att.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 13:36:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.primenet.com (smtp02.primenet.com [206.165.6.132]) by hub.freebsd.org (Postfix) with ESMTP id 5B5BB14A0D for ; Fri, 8 Oct 1999 13:36:12 -0700 (PDT) (envelope-from gamut@pop.primenet.com) Received: (from daemon@localhost) by smtp02.primenet.com (8.8.8/8.8.8) id NAA06499 for ; Fri, 8 Oct 1999 13:36:11 -0700 (MST) Date: Fri, 8 Oct 1999 13:36:11 -0700 (MST) Message-Id: <199910082036.NAA06499@smtp02.primenet.com> Received: from 208-48-174-65.nas-2.scf.primenet.com(208.48.174.65), claiming to be "Vivaldi.primenet.com" via SMTP by smtp02.primenet.com, id smtpd006315; Fri Oct 8 13:36:00 1999 X-Sender: gamut@pop.primenet.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: freebsd-questions@FreeBSD.ORG From: gamut@primenet.com Subject: Printer Drivers? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Greetings! I'm just about to buy a laser printer and have more or less settled on the NEC Superscript 870. Where would I look to see if there is an existing driver for this printer? Thanks very much for your help, your pal, Pedro To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 13:38:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lh2.rdc1.bc.home.com (ha2.rdc1.bc.wave.home.com [24.2.10.67]) by hub.freebsd.org (Postfix) with ESMTP id D90AE14A0D for ; Fri, 8 Oct 1999 13:38:22 -0700 (PDT) (envelope-from whitehat@home.com) Received: from home.com ([24.113.65.122]) by lh2.rdc1.bc.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991008203822.LJXG9582.lh2.rdc1.bc.home.com@home.com> for ; Fri, 8 Oct 1999 13:38:22 -0700 Message-ID: <37FE5446.6353C34B@home.com> Date: Fri, 08 Oct 1999 13:29:58 -0700 From: whitehat@home.com Organization: @Home Network Member X-Mailer: Mozilla 4.05 [en]C-AtHome0404 (Win95; U) MIME-Version: 1.0 To: questions@freebsd.org Subject: bad resolution Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Ok..I got X up and running, but there's one small thing wrong. I told it to go 640x480 (my win95/linux resolution) but for some reason X only goes to the top right of my screen, and everytime it starts my monitor identifies it as a "new video", which did not happen with Xfree86 in Linux. I tried the xvidtune program, but it looked a little scary. Another reason might be that I defined my monitor vertical sync rate 50-120, and my horizontal sync rate as 30-85. Should I just use a number in between those? Like instead of 50-120 should I use 90? I also suffer failure at the hands of KDE. I have a suspicion that the packages for KDE are scattered among the other 3 CD's...because when I begin to install KDE (from the second Cd) it begins to install, but stops after it cannot find a package on the CD. Whats going on? The error is like this "Unable to fetch package kdelib from selected media. No package add will be done." Help To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 13:50:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 534FA15067 for ; Fri, 8 Oct 1999 13:50:07 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id OAA03543; Fri, 8 Oct 1999 14:09:20 -0700 (PDT) Date: Fri, 8 Oct 1999 14:09:20 -0700 (PDT) From: Alfred Perlstein To: gamut@primenet.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Printer Drivers? In-Reply-To: <199910082036.NAA06499@smtp02.primenet.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999 gamut@primenet.com wrote: > Greetings! > I'm just about to buy a laser printer and have more or less > settled on the NEC Superscript 870. Where would I look to see if there > is an existing driver for this printer? Your best bet is to look at the supported printer drivers for alladin ghostscript: /usr/ports/print/ghostscript55 good luck, -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 13:54:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gfc-mad-proxy.gflesch.com (gfc-mad-proxy.gflesch.com [208.212.82.194]) by hub.freebsd.org (Postfix) with ESMTP id D005214D29 for ; Fri, 8 Oct 1999 13:54:47 -0700 (PDT) (envelope-from kwills@gflesch.com) Received: from gfc-mad-mail.gflesch.com (gfc-mad-mail.gflesch.int [10.1.1.25]) by gfc-mad-proxy.gflesch.com (8.9.2/8.9.1) with ESMTP id PAA89939; Fri, 8 Oct 1999 15:46:24 -0500 (CDT) (envelope-from kwills@gflesch.com) Received: by gfc-mad-mail.gflesch.int with Internet Mail Service (5.5.2448.0) id ; Fri, 8 Oct 1999 15:54:19 -0500 Message-ID: <058BE165CBA8D111A82E0008C79F9E35024858@gfc-mad-dc.gflesch.int> From: "Wills, Ken" To: Ludo Koren , freebsd-questions@freebsd.org Subject: RE: Transfer of user accounts Date: Fri, 8 Oct 1999 15:54:27 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Ludo Koren > Sent: Friday, October 08, 1999 12:41 PM > To: freebsd-questions@freebsd.org > Subject: Transfer of user accounts > I want to transfer user accounts from FreeBSD 2.2.7-RELEASE to > 3.3-STABLE. I grabbed /etc/master.passwd file and run > pwd_mkdb -C /etc/master.passwd > pwd_mkdb -p /etc/master.passwd > > There were no errors encountered. Afterwards, I am not able to login > with new password nor old password. Please, point to me what I am > doing wrong. I think this may be a faq. You might have to install DES on the 3.3 machine. Check the mailing list archives. Ken To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 13:59:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from granite.sentex.net (granite.sentex.ca [199.212.134.1]) by hub.freebsd.org (Postfix) with ESMTP id E5B9C14F8F; Fri, 8 Oct 1999 13:59:01 -0700 (PDT) (envelope-from mike@sentex.net) Received: from simoeon (simeon.sentex.ca [209.112.4.47]) by granite.sentex.net (8.8.8/8.6.9) with SMTP id QAA07638; Fri, 8 Oct 1999 16:59:01 -0400 (EDT) Message-Id: <3.0.5.32.19991008165743.01746210@staff.sentex.ca> X-Sender: mdtpop@staff.sentex.ca X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.5 (32) Date: Fri, 08 Oct 1999 16:57:43 -0400 To: questions@freebsd.org From: Mike Tancsa Subject: improving NIS speeds Cc: freebsd-isp@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am in the process of testing to see if NIS is the system for us. I havent got into any formal benchmarkings yet, but have noticed some speed differences. For example, running top, has a good 3 second delay before it displays anything. I imagine this is due to the looking up username-UID maps via NIS. Are there any optimizations that I can do ? I am concerned that if I make this a 20K user pop server, there will be similar delays each time at authentication time ? Or is it something special about top. I ordered the ORA "Managing NIS+NFS" book, but it hasnt arrived yet. In the mean time, are there any good online resources I could consult about NIS optimizations? Or should I just look at some other system like Kerberos. ---Mike ------------------------------------------------------------------------ Mike Tancsa, tel 01.519.651.3400 Network Administrator, mike@sentex.net Sentex Communications www.sentex.net Cambridge, Ontario Canada To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 14: 6:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from shell.futuresouth.com (shell.futuresouth.com [198.78.58.28]) by hub.freebsd.org (Postfix) with ESMTP id 63F76153F2; Fri, 8 Oct 1999 14:06:05 -0700 (PDT) (envelope-from tim@futuresouth.com) Received: (from tim@localhost) by shell.futuresouth.com (8.9.3/8.9.3) id QAA20514; Fri, 8 Oct 1999 16:05:53 -0500 (CDT) Date: Fri, 8 Oct 1999 16:05:53 -0500 From: Tim Tsai To: Mike Tancsa Cc: questions@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG Subject: Re: improving NIS speeds Message-ID: <19991008160552.A20238@futuresouth.com> References: <3.0.5.32.19991008165743.01746210@staff.sentex.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <3.0.5.32.19991008165743.01746210@staff.sentex.ca> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I'd personally avoid NIS altogether for POP. Most newer mail software allows a single UID system where the username/mailbox is detached from the underlying OS's username/UID system. If you do want to use FreeBSD's username/UID, you might want to consider simply a rdist script that'll copy the master.passwd database and run the password make program. We have found this solution to be a lot more reliable and maintainable than NIS. Tim On Fri, Oct 08, 1999 at 04:57:43PM -0400, Mike Tancsa wrote: > > Hi, > I am in the process of testing to see if NIS is the system for us. I > havent got into any formal benchmarkings yet, but have noticed some speed > differences. For example, running top, has a good 3 second delay before it > displays anything. I imagine this is due to the looking up username-UID > maps via NIS. Are there any optimizations that I can do ? I am concerned > that if I make this a 20K user pop server, there will be similar delays > each time at authentication time ? Or is it something special about top. I > ordered the ORA "Managing NIS+NFS" book, but it hasnt arrived yet. In the > mean time, are there any good online resources I could consult about NIS > optimizations? Or should I just look at some other system like Kerberos. > > ---Mike > ------------------------------------------------------------------------ > Mike Tancsa, tel 01.519.651.3400 > Network Administrator, mike@sentex.net > Sentex Communications www.sentex.net > Cambridge, Ontario Canada > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-isp" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 14:35: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from groove.akcecc.kiev.ua (samtel.akcecc.kiev.ua [195.64.235.242]) by hub.freebsd.org (Postfix) with ESMTP id ED55E158FA for ; Fri, 8 Oct 1999 14:34:55 -0700 (PDT) (envelope-from vlad@akcecc.net) Received: (from vlad@localhost) by groove.akcecc.kiev.ua (8.9.3/8.9.3) id AAA00356; Mon, 4 Oct 1999 00:11:23 +0300 (EEST) (envelope-from vlad) Date: Mon, 4 Oct 1999 00:11:23 +0300 (EEST) From: vlad Message-Id: <199910032111.AAA00356@groove.akcecc.kiev.ua> To: freebsd-questions@FreeBSD.org Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-URL: http://www.freebsd.org/FAQ/book.html X-Mailer: Lynx, Version 2.8.1rel.2 Subject: http://www.freebsd.org/FAQ/book.html Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG How can I setup pppd? Please with the sript file!!! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 14:54:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lvdi.net (Mta.lvdi.net [216.24.138.2]) by hub.freebsd.org (Postfix) with SMTP id 86C5914E06 for ; Fri, 8 Oct 1999 14:54:51 -0700 (PDT) (envelope-from notme@lvdi.net) Received: from lvdi.net ([216.24.141.207]) by 216.24.138.2127.0.0.1 ; Fri, 08 Oct 1999 14:49:03 2000 PDT Message-ID: <37FE6A57.C5B99341@lvdi.net> Date: Fri, 08 Oct 1999 15:04:07 -0700 From: Frankie Li X-Mailer: Mozilla 4.7 [en] (Win98; I) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@freebsd.org" Subject: two harddrive with same monut point Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I am wondering if there is anyway I could have 2 EIDE hard drive (both 4 GB) under the same /usr file system? Many of my current setup for a server is based on their home dir, and changing them from /usr to something else could be a pain in the butt... Thanks for your help! Frankie To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 15:47:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lh2.rdc1.bc.home.com (ha2.rdc1.bc.wave.home.com [24.2.10.67]) by hub.freebsd.org (Postfix) with ESMTP id A471014C4B for ; Fri, 8 Oct 1999 15:47:29 -0700 (PDT) (envelope-from whitehat@home.com) Received: from home.com ([24.113.65.122]) by lh2.rdc1.bc.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991008224729.NYLH9582.lh2.rdc1.bc.home.com@home.com> for ; Fri, 8 Oct 1999 15:47:29 -0700 Message-ID: <37FE726F.311951CB@home.com> Date: Fri, 08 Oct 1999 15:38:39 -0700 From: whitehat@home.com Organization: @Home Network Member X-Mailer: Mozilla 4.05 [en]C-AtHome0404 (Win95; U) MIME-Version: 1.0 To: questions@freebsd.org Subject: kde/enlightenment Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Sorry to be mailing again, but I have another important question. I managed to install KDE/FVWM95/Enlightenment/Netscape, however I get these errors when I attempt to start them: KDE: kcontrol: cannot connect to X server kaudioserver: cannot connect to X server kaudioserver: audio system might not terminate at end of session maudio: cannot open audio device kwmsound: cannot connect to X server kpanel: cannot connect to X server kwm: cannot connect to X server cr699733-a# kbgndwm: cannot connect to X server kfm: cannot connect to X server Fvwm95: Fvwm-95: in function main: <> can't open display Netscape: Couldnt open /usr/libexec/ld.so. Those are all the error messages that came up...I find it odd that they can't connect to the X-server, as XFree86 works just fine when I do "startx". Can someone help? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16: 7:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from marcos.networkcs.com (marcos.networkcs.com [137.66.16.1]) by hub.freebsd.org (Postfix) with ESMTP id 2068A14CEA for ; Fri, 8 Oct 1999 16:07:14 -0700 (PDT) (envelope-from brad@us.networkcs.com) Received: from us.networkcs.com (us.networkcs.com [137.66.11.15]) by marcos.networkcs.com (8.9.0.Beta5/8.9.0.Beta5) with ESMTP id SAA06347 for ; Fri, 8 Oct 1999 18:07:14 -0500 (CDT) Received: (from brad@localhost) by us.networkcs.com (8.9.2/8.8.7) id SAA79523 for freebsd-questions@FreeBSD.ORG; Fri, 8 Oct 1999 18:07:13 -0500 (CDT) Date: Fri, 8 Oct 1999 18:07:13 -0500 (CDT) From: Brad Blasing Message-Id: <199910082307.SAA79523@us.networkcs.com> To: freebsd-questions@FreeBSD.ORG Subject: FreeBSD 2.2.7 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is 2.2.7 Y2K compliant? -Brad ,----------------------------------------------------------------, / Bradford Blasing Network Computing Services * / / E-mail: brad@networkcs.com 1200 Washington Avenue South / / Phone: (612)337-3525 Minneapolis, MN 55415 USA / / FAX: (612)337-3400 / / * Formerly known as "Minnesota Supercomputer Center" / '----------------------------------------------------------------' To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:13: 2 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id A102214FA1 for ; Fri, 8 Oct 1999 16:12:59 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 44209 invoked by uid 1001); 8 Oct 1999 23:12:58 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 8 Oct 1999 23:12:58 -0000 Date: Fri, 8 Oct 1999 19:12:58 -0400 (EDT) From: Jaime Kikpole To: Jaye Mathisen Cc: freebsd-questions@freebsd.org Subject: Re: Booting from RAID5 array? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Jaye Mathisen wrote: > Sounds like a geometry problem, *or*, the DPT bios is not set to be > bootable. Well the BIOS is set for "Normal" booting order. According to their tech support phone line, that's basically on. > Make sure other devices are disabled (if disk based). What other deives did you have in mind? I disabled the on-board Adaptec 7xxx (can't remember its number) and it didn't help. > What I always do with the RAID cards myself is create a small > DOS partition and then fdisk/format it, and copy the DPT > config utilities to the hard drive. I did this, loaded FreeBSD onto da0s2 and made a 35MB FAT16 (i.e. "DOS") partition. Then I rebooted from an MS-DOS floppy and ran fdisk. It exited with the error message "No fixed disks". (Or something like that.) The box still doesn't see the array as a bootable disk. Suggestions? Thanks, Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:15:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from scientia.demon.co.uk (scientia.demon.co.uk [212.228.14.13]) by hub.freebsd.org (Postfix) with ESMTP id 963791500C for ; Fri, 8 Oct 1999 16:15:04 -0700 (PDT) (envelope-from ben@scientia.demon.co.uk) Received: from strontium.scientia.demon.co.uk ([192.168.0.4] ident=exim) by scientia.demon.co.uk with esmtp (Exim 3.032 #1) id 11Zglr-0002CA-00; Fri, 08 Oct 1999 21:37:43 +0100 Received: (from ben) by strontium.scientia.demon.co.uk (Exim 3.032 #1) id 11Zglq-0000Jb-00; Fri, 08 Oct 1999 21:37:42 +0100 Date: Fri, 8 Oct 1999 21:37:42 +0100 From: Ben Smithurst To: Joe Pepin Cc: FBSDQuestion Subject: Re: Where (in the source) do PIDs get set? Message-ID: <19991008213742.A423@strontium.scientia.demon.co.uk> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i In-Reply-To: Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Joe Pepin wrote: > I'd like to start poking around in the source to start learning > what's up. My first question is- where do I look to find the piece > of code that sets a processes' PID? I've grepped and grepped, but > with no real luck. I'm interested in seeing how hard it would be > to randomize those like in OpenBSD. Look around line 251 of /sys/kern/kern_fork.c. If you have a different version, it may vary, look for occurences of "nextpid" and you shouldn't be far away. -- Ben Smithurst | PGP: 0x99392F7D ben@scientia.demon.co.uk | key available from keyservers and | ben+pgp@scientia.demon.co.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:18:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 813401508F for ; Fri, 8 Oct 1999 16:18:46 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 44244 invoked by uid 1001); 8 Oct 1999 23:18:45 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 8 Oct 1999 23:18:45 -0000 Date: Fri, 8 Oct 1999 19:18:45 -0400 (EDT) From: Jaime Kikpole To: Edward Kovarski Cc: freebsd-questions@freebsd.org Subject: Re: Booting from RAID5 array? (fwd) In-Reply-To: <871zb7teve.fsf@nyctereutes.digitalized.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On 7 Oct 1999, Edward Kovarski wrote: > To the best of my knowledge, DPT controllers are PCI-to-RAID controllers > which generally do not allow booting from the RAID controllers as they > are software driven. They're hardware based. Do you know of any other RAID cards that work in FreeBSD? > If booting from the RAID subsystem is essential then I would recommend an > external RAID controller. They are self-sufficient and do not require any > drivers. They mask the entire RAID array as a very large SCSI drive which > then in turns works with any SCSI controller. Where could I find such a thing? Thanks, Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:26:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id EE1A5151F3 for ; Fri, 8 Oct 1999 16:26:33 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 44268 invoked by uid 1001); 8 Oct 1999 23:26:31 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 8 Oct 1999 23:26:31 -0000 Date: Fri, 8 Oct 1999 19:26:31 -0400 (EDT) From: Jaime Kikpole To: glbl nhm Cc: freebsd-questions@FreeBSD.ORG, numrphy@californi.com Subject: Re: support? In-Reply-To: <384CAEA3.D1E1A596@california.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Mon, 6 Dec 1999, glbl nhm wrote: > neither the FAQ or the release notes mentioned: > 1) video cards - diamond 2000 stealth 3D Pro w/ S3 ViRGE DX > 2) PCMCIA - please don't laugh - I have an old Zeos meridian and an > adaptec card for it to an external SCSI drive can I install FreeBSD? Is it a VGA/SVGA card? Probably. If so, the text console will work fine. As to any GUI working on it, you need to check with XFree86, not FreeBSD. Look for the card on www.xfree86.org. I seem to remember something in the LINT kernel config file about portable computers and maybe even something about PC cards. I can't recall exactly, though. Aren't PC cards the same as PCMCIA cards? Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:29:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 3B35414E53 for ; Fri, 8 Oct 1999 16:29:32 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 44304 invoked by uid 1001); 8 Oct 1999 23:29:31 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 8 Oct 1999 23:29:31 -0000 Date: Fri, 8 Oct 1999 19:29:31 -0400 (EDT) From: Jaime Kikpole To: Brad Blasing Cc: freebsd-questions@FreeBSD.ORG Subject: Re: FreeBSD 2.2.7 In-Reply-To: <199910082307.SAA79523@us.networkcs.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Brad Blasing wrote: > Is 2.2.7 Y2K compliant? To my knowledge, it is complient but a small handfull of utilities on it are slightly not complient. Check the web site and consider upgrading. Also keep in mind that FreeBSD's complience and the complience of some random program that is running on it are not necessarily connected to each other. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:30:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from one.net.au (lightblue.one.net.au [203.101.17.165]) by hub.freebsd.org (Postfix) with SMTP id 6C669151F3 for ; Fri, 8 Oct 1999 16:29:55 -0700 (PDT) (envelope-from r_owan@one.net.au) Received: (qmail 19031 invoked from network); 8 Oct 1999 23:29:52 -0000 Received: from unknown (HELO ihatem-) (203.101.79.15) by lightblue.one.net.au with SMTP; 8 Oct 1999 23:29:52 -0000 From: r_owan@one.net.au To: questions@freebsd.org Date: Sat, 9 Oct 1999 09:23:14 +1000 MIME-Version: 1.0 Content-type: text/enriched; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: /dev/rsa0 and 'tar' X-mailer: Pegasus Mail for Win32 (v3.12a) Message-Id: <19991008232957.6C669151F3@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG 0100,0100,0100I have just bought the FreeBSD 3.2 CD set, and have successfully installed it, and gotten many things (such as X windows) to work. The problem i have is when i try to use the 'Couriertar -xArial' command, it responds with "Couriertar:can't open /dev/rsa0: Device not configuredArial". What does /dev/rsa0 represent? How can i fix this so i can run tar? Any help would be greatly appreciated. Thanks, Rowan To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:32:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail2.uniserve.com (mail2.uniserve.com [204.244.156.7]) by hub.freebsd.org (Postfix) with ESMTP id C3C3614CBE for ; Fri, 8 Oct 1999 16:32:21 -0700 (PDT) (envelope-from shayman@uniserve.com) Received: from abb1d46.dial.uniserve.ca ([204.244.210.173] helo=MAYA) by mail2.uniserve.com with smtp (Exim 3.03 #4) id 11ZjUp-0000e8-00 for freebsd-questions@FreeBSD.ORG; Fri, 08 Oct 1999 16:32:20 -0700 Message-ID: <001201bf11e5$a80758e0$0100a8c0@WORKGROUP> From: "Fergus Hayman" To: Subject: FreeBSD Laptop Panic Date: Fri, 8 Oct 1999 16:34:21 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Trouble with lock-up -- heres what happend trying to shut down ,on toshiba 4080xcdt laptop computer is frozen with the following screen below. Only restarts on this screen . yellow light power light blinks when off. FreeBSD ver 3.3 KDE X was configured ran fine, did install xbatt , but had some more requirements. thanks Fergus Hayman 604-855-6767 #shutdown -k now # this was my last command -- my new laptop Shutdown NOW! shutdown: [pid673] *** Final System shutdown message form shayman@*** System going down IMMEDIATLRY Oct 8 16:04:15 shutdown: shutdown by shayman: System shutdown time has arrived but you'll have to do it yourself # # Shutting down daemon processes:. OCt 8 16:04:42 syslog exiting on signal 15 Fatal double fault: eip = 0xc0233254 esp = )xc44aa000 ebp = 0xc44aa040 panic: bouble fault Automatic reboot in 15 seconds - press a key on console to abort To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:40:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id AA6261538A for ; Fri, 8 Oct 1999 16:40:10 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 44372 invoked by uid 1001); 8 Oct 1999 23:40:09 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 8 Oct 1999 23:40:09 -0000 Date: Fri, 8 Oct 1999 19:40:09 -0400 (EDT) From: Jaime Kikpole To: r_owan@one.net.au Cc: questions@freebsd.org Subject: Re: /dev/rsa0 and 'tar' In-Reply-To: <19991008232957.6C669151F3@hub.freebsd.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999 r_owan@one.net.au wrote: > The problem i have is when i try to use the 'Couriertar -xArial' command, it > responds with "Couriertar:can't open /dev/rsa0: Device not > configuredArial". > > What does /dev/rsa0 represent? How can i fix this so i can run tar? The other problem that you have is that you're sending HTML formatted messages. You should probably turn that off, as it only limits the ability for many people to read your messages. As to the "tar -x" problem, I have a suggestion. The tar program is built for Tape ARchives and likes to use tape drives. You're probably trying to use it with a file, though. If so, try something like "tar xvf file.tar" or, in the case of compressed archives, "tar zxvf file.tar.gz". Good luck, Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:49:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from indyweb.cgocable.ca (indyweb.cgocable.ca [205.151.69.200]) by hub.freebsd.org (Postfix) with ESMTP id 96C6414FFC for ; Fri, 8 Oct 1999 16:49:12 -0700 (PDT) (envelope-from foub@globetrotter.net) Received: from windows.cgocable.ca (141-154.ri.cgocable.ca [24.226.141.154]) by indyweb.cgocable.ca (8.9.3/8.9.3) with SMTP id TAA8484668 for ; Fri, 8 Oct 1999 19:49:10 -0400 (EDT) Message-ID: <002301bf11e7$d4f978e0$0201a8c0@cgocable.ca> From: "Guillaume Paquet" To: Subject: ifconfig and route Date: Fri, 8 Oct 1999 19:49:58 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Is there a way with ifconfig and route to configure a class C in only one command, instead of doing the commands for every IP? Guillaume Paquet foub@globetrotter.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 16:59:27 1999 Delivered-To: freebsd-questions@freebsd.org Received: from unix.megared.net.mx (megamail.megared.com.mx [207.249.162.252]) by hub.freebsd.org (Postfix) with ESMTP id 751AD14FFC for ; Fri, 8 Oct 1999 16:59:24 -0700 (PDT) (envelope-from ales@megared.net.mx) Received: from ales (ales.megared.net.mx [207.249.163.251]) by unix.megared.net.mx (8.9.3/8.9.3) with SMTP id SAA04984; Fri, 8 Oct 1999 18:58:32 -0500 (CDT) (envelope-from ales@megared.net.mx) Message-ID: <02b801bf11e9$04a15f80$fba3f9cf@megared.net.mx> Reply-To: "Alejandro Ramirez" From: "Alejandro Ramirez" To: , References: <37FE726F.311951CB@home.com> Subject: RE: kde/enlightenment Date: Fri, 8 Oct 1999 18:58:23 -0500 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, > Sorry to be mailing again, but I have another important question. I > managed to install KDE/FVWM95/Enlightenment/Netscape, however I get > these errors when I attempt to start them: The KDE, fvwm95 & Enlightenment ports are meant to be runned at Xwindows start up (they are all Windows Managers), but one at a time, you cant run them at the same time, for this you have to create a file called ".xinitrc" in your home directory and put the line of the window manager that you want to start up, like this: % cd % touch .xinitrc Add the following line to the file: fvwm95 then type startx and you are running the fvwm95 window manager, change that line for the WM of your choice. For the Netscape thing, you must install the compat22 libraries for FreeBSD 2.2.x and 3.0 a.out binary compatibility, use the /stand/sysinstall utility to install it. Have Fun... Ales > KDE: > > kcontrol: cannot connect to X server > kaudioserver: cannot connect to X server > kaudioserver: audio system might not terminate at end of session > maudio: cannot open audio device > kwmsound: cannot connect to X server > kpanel: cannot connect to X server > kwm: cannot connect to X server > cr699733-a# kbgndwm: cannot connect to X server > kfm: cannot connect to X server > > Fvwm95: > > Fvwm-95: in function main: <> can't open display > > Netscape: > > Couldnt open /usr/libexec/ld.so. > > Those are all the error messages that came up...I find it odd that they > can't connect to the X-server, as XFree86 works just fine when I do > "startx". Can someone help? > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 17: 1:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 57BD1152D0 for ; Fri, 8 Oct 1999 17:01:44 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 44419 invoked by uid 1001); 9 Oct 1999 00:01:43 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 00:01:43 -0000 Date: Fri, 8 Oct 1999 20:01:42 -0400 (EDT) From: Jaime Kikpole To: Guillaume Paquet Cc: freebsd-questions@freebsd.org Subject: Re: ifconfig and route In-Reply-To: <002301bf11e7$d4f978e0$0201a8c0@cgocable.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Guillaume Paquet wrote: > Is there a way with ifconfig and route to configure a class C in only one > command, instead of doing the commands for every IP? To my knowledge, no. Adding an IP configuration to an interface and configuring routes can't (I think) both be done with any utilities in FreeBSD. Of course, you could write a shell script that takes STDIN input and runs the ifconfig and route commands that would be needed. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 17: 2:58 1999 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id E55241503E; Fri, 8 Oct 1999 17:02:45 -0700 (PDT) To: FreeBSD-questions@FreeBSD.org Subject: How to get best results from FreeBSD-questions Message-Id: <19991009000245.E55241503E@hub.freebsd.org> Date: Fri, 8 Oct 1999 17:02:45 -0700 (PDT) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG How to get the best results from FreeBSD questions. =================================================== Last update 3 September 1999 This is a regular posting to the FreeBSD questions mailing list. If you got it in answer to a message you sent, it means that the sender thinks that at least one of the following things was wrong with your message: - You left out a subject line, or the subject line was not appropriate. - You formatted it in such a way that it was difficult to read. - You asked more than one unrelated question in one message. - You sent out a message with an incorrect date, time or time zone. - You sent out the same message more than once. - You sent an 'unsubscribe' message to FreeBSD-questions. If you have done any of these things, there is a good chance that you will get more than one copy of this message from different people. Read on, and your next message will be more successful. This document is also available on the web at http://www.lemis.com/questions.html. ===================================================================== Contents: I: Introduction II: How to unsubscribe from FreeBSD-questions III: Should I ask -questions or -hackers? IV: How to submit a question to FreeBSD-questions V: How to answer a question to FreeBSD-questions I: Introduction =============== This is a regular posting aimed to help both those seeking advice from FreeBSD-questions (the "newcomers"), and also those who answer the questions (the "hackers"). Note that the term "hacker" has nothing to do with breaking into other people's computers. The correct term for the latter activity is "cracker", but the popular press hasn't found out yet. The FreeBSD hackers disapprove strongly of cracking security, and have nothing to do with it. In the past, there has been some friction which stems from the different viewpoints of the two groups. The newcomers accused the hackers of being arrogant, stuck-up, and unhelpful, while the hackers accused the newcomers of being stupid, unable to read plain English, and expecting everything to be handed to them on a silver platter. Of course, there's an element of truth in both these claims, but for the most part these viewpoints come from a sense of frustration. In this document, I'd like to do something to relieve this frustration and help everybody get better results from FreeBSD-questions. In the following section, I recommend how to submit a question; after that, we'll look at how to answer one. II: How to unsubscribe from FreeBSD-questions ============================================== When you subscribed to FreeBSD-questions, you got a welcome message from Majordomo@FreeBSD.ORG. In this message, amongst other things, it told you how to unsubscribe. Here's a typical message: Welcome to the freebsd-questions mailing list! If you ever want to remove yourself from this mailing list, you can send mail to "Majordomo@FreeBSD.ORG" with the following command in the body of your email message: unsubscribe freebsd-questions Greg Lehey Here's the general information for the list you've subscribed to, in case you don't already have it: FREEBSD-QUESTIONS User questions This is the mailing list for questions about FreeBSD. You should not send "how to" questions to the technical lists unless you consider the question to be pretty technical. Normally, unsubscribing is even simpler than the message suggests: you don't need to specify your mail ID unless it is different from the one which you specified when you subscribed. If Majordomo replies and tells you (incorrectly) that you're not on the list, this may mean one of two things: 1. You have changed your mail ID since you subscribed. That's where keeping the original message from majordomo comes in handy. For example, the sample message above shows my mail ID as grog@lemis.de. Since then, I have changed it to grog@lemis.com. If I were to try to remove grog@lemis.com from the list, it would fail: I would have to specify the name with which I joined. 2. You're subscribed to a mailing list which is subscribed to FreeBSD-questions. If that's the case, you'll have to figure out which one it is and get your name taken off that one. If you're not sure which one it might be, check the headers of the messages you receive from freebsd-questions: maybe there's a clue there. If you've done all this, and you still can't figure out what's going on, send a message to Postmaster@FreeBSD.org, and he will sort things out for you. Don't send a message to FreeBSD-questions: they can't help you. III: Should I ask -questions, -newbies or -hackers? =================================================== Two mailing lists handle general questions about FreeBSD, FreeBSD-questions and FreeBSD-hackers. In addition, the FreeBSD-newbies list caters specifically for people who are new to FreeBSD and may be having trouble getting used to the environment. In some cases, it's not really clear which group you should ask. The following criteria should help for 99% of all questions, however: If the question is of a general nature, first check whether this isn't a Frequently Asked Question (FAQ). There's a list of these questions at http://www.freebsd.org/FAQ/FAQ.html, and also on your own system (once you've installed it) at /usr/share/doc/FAQ/FAQ.html. Check there, and if you don't find an answer, ask FreeBSD-questions. Examples might be questions about installing FreeBSD or the use of a particular UNIX utility. If you think the question relates to a bug, but you're not sure, or you don't know how to look for it, send the message to FreeBSD-questions. If the question relates to a bug, and you're almost sure that it's a bug (for example, you can pinpoint the place in the code where it happens, and you maybe have a fix), then send the message to FreeBSD-hackers. You should also enter a problem report with the send-pr utility. If the question relates to enhancements to FreeBSD, and you can make suggestions about how to implement them, then send the message to FreeBSD-hackers. If the question is of particularly technical nature, such as implementation details or suggestions for improvements, then send the message to FreeBSD-hackers. If you're new to FreeBSD, and the message is about your own relationship to FreeBSD, send the message to FreeBSD-newbies. There are also a number of other specialized mailing lists, for example FreeBSD-isp, which caters to the interests of ISPs (Internet Service Providers) who run FreeBSD. If you happen to be an ISP, this doesn't mean you should automatically send your questions to FreeBSD-isp. The criteria above still apply, and it's in your interest to stick to them, since you're more likely to get good results that way. IV: How to submit a question ============================= When submitting a question to FreeBSD-questions, consider the following points: 1. Remember that nobody gets paid for answering a FreeBSD question. They do it of their own free will. You can influence this free will positively by submitting a well-formulated question supplying as much relevant information as possible. You can influence this free will negatively by submitting an incomplete, illegible, or rude question. It's perfectly possible to send a message to FreeBSD-questions and not get an answer even if you follow these rules. It's much more possible to not get an answer if you don't. In the rest of this document, we'll look at how to get the most out of your question to FreeBSD-questions. 2. Not everybody who answers FreeBSD questions reads every message: they look at the subject line and decide whether it interests them. Clearly, it's in your interest to specify a subject. ``FreeBSD problem'' or ``Help'' aren't enough. If you provide no subject at all, many people won't bother reading it. If your subject isn't specific enough, the people who can answer it may not read it. 3. Format your message so that it is legible, and PLEASE DON'T SHOUT!!!!!. We appreciate that a lot of people don't speak English as their first language, and we try to make allowances for that, but it's really painful to try to read a message written full of typos or without any line breaks. A lot of badly formatted messages come from bad mailers or badly configured mailers. The following mailers are known to send out badly formatted messages without you finding out about them: Eudora exmh Microsoft Exchange Microsoft Internet Mail Microsoft Outlook Netscape As you can see, the mailers in the Microsoft world are frequent offenders. If at all possible, use a UNIX mailer. If you must use a mailer under Microsoft environments, make sure it is set up correctly. Try not to use MIME: a lot of people use mailers which don't get on very well with MIME. For further information on this subject, check out http://www.lemis.com/email.html. 4. Make sure your time and time zone are set correctly. This may seem a little silly, since your message still gets there, but many of the people you are trying to reach get several hundred messages a day. They frequently sort the incoming messages by subject and by date, and if your message doesn't come before the first answer, they may assume they missed it and not bother to look. 5. Don't include unrelated questions in the same message. Firstly, a long message tends to scare people off, and secondly, it's more difficult to get all the people who can answer all the questions to read the message. 6. Specify as much information as possible. This is a difficult area, and we need to expand on what information you need to submit, but here's a start: If you get error messages, don't say ``I get error messages'', say (for example) ``I get the error message 'No route to host'''. If your system panics, don't say ``My system panicked'', say (for example) ``my system panicked with the message 'free vnode isn't'''. If you have difficulty installing FreeBSD, please tell us what hardware you have. In particular, it's important to know the IRQs and I/O addresses of the boards installed in your machine. If you have difficulty getting PPP to run, describe the configuration. Which version of PPP do you use? What kind of authentication do you have? Do you have a static or dynamic IP address? What kind of messages do you get in the log file? 7. If you don't get an answer immediately, or if you don't even see your own message appear on the list immediately, don't resend the message. Wait at least 24 hours. The FreeBSD mailer offloads messages to a number of subordinate mailers around the world, and sometimes it can take several hours for the mail to get through. And once it gets through, the one person who might know the answer will probably just have gone to bed in his part of the world. 8. If you do all this, and you still don't get an answer, there could be other reasons. For example, the problem is so complicated that nobody knows the answer, or the person who does know the answer was offline. If you don't get an answer after, say, a week, it might help to re-send the message. If you don't get an answer to your second message, though, you're probably not going to get one from this forum. Resending the same message again and again will only make you unpopular. To summarize, let's assume you know the answer to the following question (yes, it's the same one in each case :-). You choose which of these two questions you would be more prepared to answer: Message 1: Subject: (none) I just can't get hits damn silly FereBSD system to workd, and Im really good at this tsuff, but I have never seen anythign sho difficult to install, it jst wont work whatever I try so why don't y9ou guys tell me what I doing wrong. ---------------------------------------------------------------------- Message 2: Subject: Problems installing FreeBSD I've just got the FreeBSD 2.1.5 CD-ROM from Walnut Creek, and I'm having a lot of difficulty installing it. I have a 66 MHz 486 with 16 MB of memory and an Adaptec 1540A SCSI board, a 1.2GB Quantum Fireball disk and a Toshiba 3501XA CD-ROM drive. The installation works just fine, but when I try to reboot the system, I get the message "Missing Operating System". ---------------------------------------------------------------------- V: How to follow up to a question ================================= Often you will want to send in additional information to a question you have already sent. The best way to do this is to reply to your original message. This has three advantages: 1. You include the original message text, so people will know what you're talking about. Don't forget to trim unnecessary text out, though. 2. The text in the subject line stays the same (you did remember to put one in, didn't you?). Many mailers will sort messages by subject. This helps group messages together. 3. The message reference numbers in the header will refer to the previous message. Some mailers, such as mutt, can thread messages, showing the exact relationships between the messages. VI: How to answer a question ============================ Before you answer a question to FreeBSD-questions, consider: 1. A lot of the points on submitting questions also apply to answering questions. Read them. 2. Has somebody already answered the question? The easiest way to check this is to sort your incoming mail by subject: then (hopefully) you'll see the question followed by any answers, all together. If somebody has already answered it, it doesn't automatically mean that you shouldn't send another answer. But it makes sense to read all the other answers first. 3. Do you have something to contribute beyond what has already been said? In general, "Yeah, me too" answers don't help much, although there are exceptions, like when somebody is describing a problem he's having, and he doesn't know whether it's his fault or whether there's something wrong with the hardware or software. If you do send a "me too" answer, you should also include any further relevant information. 4. Are you sure you understand the question? Very frequently, the person who asks the question is confused or doesn't express himself very well. Even with the best understanding of the system, it's easy to send a reply which doesn't answer the question. This doesn't help: you'll leave the person who submitted the question more frustrated or confused than ever. If nobody else answers, and you're not too sure either, you can always ask for more information. 5. Are you sure your answer is correct? If not, wait a day or so. If nobody else comes up with a better answer, you can still reply and say, for example, "I don't know if this is correct, but since nobody else has replied, why don't you try replacing your ATAPI CD-ROM with a frog?". 6. Unless there's a good reason to do otherwise, reply to the sender and to FreeBSD-questions. Many people on the FreeBSD-questions are "lurkers": they learn by reading messages sent and replied to by others. If you take a message which is of general interest off the list, you're depriving these people of their information. Be careful with group replies; lots of people send messages with hundreds of CCs. If this is the case, be sure to trim the Cc: lines appropriately. 7. Include relevant text from the original message. Trim it to the minimum, but don't overdo it. It should still be possible for somebody who didn't read the original message to understand what you're talking about. 8. Use some technique to identify which text came from the original message, and which text you add. I personally find that prepending ``> '' to the original message works best. Leaving white space after the ``> '' and leave empty lines between your text and the original text both make the result more readable. 9. Put your response in the correct place (after the text to which it replies). It's very difficult to read a thread of responses where each reply comes before the text to which it replies. 10. Most mailers change the subject line on a reply by prepending a text such as ``Re: ''. If your mailer doesn't do it automatically, you should do it manually. 11. If the submitter didn't abide by format conventions (lines too long, inappropriate subject line), please fix it. In the case of an incorrect subject line (such as ``HELP!!??''), change the subject line to (say) ``Re: Difficulties with sync PPP (was: HELP!!??)''. That way other people trying to follow the thread will have less difficulty following it. In such cases, it's appropriate to say what you did and why you did it, but try not to be rude. If you find you can't answer without being rude, don't answer. If you just want to reply to a message because of its bad format, just reply to the submitter, not to the list. You can just send him this message in reply, if you like. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 17: 3:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id 69DBF14C06; Fri, 8 Oct 1999 17:02:45 -0700 (PDT) To: FreeBSD-questions@FreeBSD.org Subject: "The Complete FreeBSD", third edition: errata and addenda Message-Id: <19991009000245.69DBF14C06@hub.freebsd.org> Date: Fri, 8 Oct 1999 17:02:45 -0700 (PDT) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Errata and addenda for the Complete FreeBSD, third edition Last revision: 2 August 1999 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, ``The Complete FreeBSD'', published by Walnut Creek, is no exception. In- evitably, a number of bugs and changes have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the third edition, formatted on 17 May 1999. You'll find this information on page iv (the page before the beginning of the Table of Contents). See the end of this document for instructions on how to find the errata for an older version. You can get the current document in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-3.ps. See page 302 of the third edition to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-3.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-3.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-3.html. All these modifications have been applied to the ongoing source text of the book, so if you buy a later edition, they will be in it as well. If you find a Page 1 The Complete FreeBSD bug or a suspected bug in the book, please contact me at Page ii _______ The instructions on page ii (opposite the title page) tell you to look at ftp://ftp.lemis.com/pub/cfbsd/errata-2 for the errata list. That's wrong. Look at this list. Pages 190 and 191 _________________ The description is not very clear about which text appears when booting from floppy for initial install, and which appears when booting normally. The procedure is very similar, but there are some differences. Add the following text after the heading Boot messages: You'll boot your system in at least two different ways: initially you'll boot from floppy or CD-ROM in order to install the system. Later, after the system is installed, you'll boot from hard disk. The procedure is almost identical, so we'll look at both versions in the following examples. Replace the text from the middle of page 191 with: If you're booting from 1.44 MB floppies, you will then see: Please insert MFS root floppy and press enter: When you insert the MFS root floppy and press Enter, you see more twirling batons, then the UserConfig screen appears. UserConfig: Modifying the boot configuration ____________________________________________ After the kernel has been loaded, the following screen will appear if you are installing the system, or if you have requested it with the -c option to the boot loader: Page 206 ________ The bottom two lines on this page should be in bold constant font, indicating that this is input for your /etc/rc.config file Page 2 Errata and addenda for the Complete FreeBSD, third edition nfs_client_enable="YES" # This host is an NFS client (or NO). nfs_server_enable="YES" # This host is an NFS server (or NO). Page 265 ________ The example on the second half of the page refers to the old SCSI driver. The scsi program is no longer available in FreeBSD 3.x. Instead, use the camcontrol program. Replace the text with:. Modern disks make provisions for recovering from such errors by allocating an alternate sector for the data. IDE drives do this automatically, but with SCSI drives you have the option of enabling or disabling reallocation. Usually it is turned on when you buy them, but occasionally it is not. When installing a new disk, you should check that the parameters ARRE (Auto Read Reallocation Enable) and AWRE (Auto Write Reallocation Enable) are turned on. For example, to check and set the values for disk da1, you would enter: # camcontrol modepage da1 -m 1 -e -P 3 # scsi -f /dev/rda1c -m 1 -e -P 3 This command will start up your favourite editor (either the one specified in the EDITOR environment variable, or vi by default) with the following data: AWRE (Auto Write Reallocation Enbld): 0 ARRE (Auto Read Reallocation Enbld): 1 TB (Transfer Block): 0 RC (Read Continuous): 0 EER (Enable Early Recovery): 0 PER (Post Error): 0 DTE (Disable Transfer on Error): 0 DCR (Disable Correction): 0 Read Retry Count: 16 Correction Span: 41 Head Offset Count: 0 Data Strobe Offset Count: 0 Write Retry Count: 16 Recovery Time Limit: 0 The values for AWRE and ARRE should both be 1. If they aren't, as in this case, where AWRE is 0, change the data with the editor, save it, and exit. The camcontrol program will write the data back to the disk and enable the option. Page 3 The Complete FreeBSD Page 331 ________ The description of the config refers to the SCSI drive sd0. This is the old name; in FreeBSD version 3, SCSI drives are called da, so this reference should be da0. Thanks to Francisco Reyes for pointing out this problem. Page 362 ________ Replace the text at the top of the page with: Next, change to the build directory and build the kernel: # cd ../../compile/FREEBIE # make depend # make The make depend is needed even if the directory has just been created: apart from creating dependency information, it also creates some files needed for the build. Thanks to Mark Ovens for drawing this to my attention, and to Francisco Reyes and Bill Fumerola for pointing out that it still wasn't fixed in the third edition. Page 409 ________ The information on setting the default routers specified the wrong end of the PPP links in some places. It should always be the ``far'' end of the link. Replace the second example on page 409, and the text following it, with this text: defaultrouter="139.130.136.129" # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty). gateway_enable="YES" # Set to YES if this host will be a gateway. This is the normal way to set the default route on a point-to-point interface. In fact, for PPP you don't need to specify the default address: the PPP packages will set it for you when the link comes up. This makes it possible to Page 4 Errata and addenda for the Complete FreeBSD, third edition set default routes when you're forced to use dynamic IP addresses, where you don't know the address at this point. We'll see how PPP does this on page 446. In the first example on page 410, the sixth example on page 412 and the second example on page 413, replace the defaultrouter definition with: defaultrouter="139.130.237.65" # Set to default gateway (or NO). Thanks to Andreas Longwitz for pointing out this error. Getting errata for older editions of the book _____________________________________________ There have been a total of five different versions of ``The Complete FreeBSD''. The most accurate way to distinguish them is by the format date, which you'll find at the bottom of page iv (the page before the beginning of the Table of Contents) in all versions of the book. 1. The first was titled ``Installing and running FreeBSD'', and was formatted on 24 February 1996. No errata list exists for this book. 2. For the first edition (19 July 1996), get ftp://ftp.lemis.com/pub/cfbsd/er- rata-1. This same file is also available via the web link http://www.lemis.com/errata-1. I am no longer updating this errata list. 3. The list for the second edition (16 December 1997) is available in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps. See page 222 of the second edition to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only Page 5 Getting errata for older editions of the book take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-2.html. 4. The revised second edition was formatted on 11 February 1999. As the name suggests, it's not a complete new edition: in fact, only three chapters are different: o The chapter ``Setting up X11'' has been brought up to date. o Appendix D (``Contents of the Ports Collection'') has been replaced by two appendixes, ``Errata and Addenda'' (the errata list up to date at the time) and ``FreeBSD 3.0'', which describes the differences between FreeBSD 2.x and FreeBSD 3.x. There is no separate errata list for this book. Refer to the second edition errata list. 5. The current, third edition, formatted on 17 May 1999. This is the correct list for this edition. Page 6 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 17: 3:19 1999 Delivered-To: freebsd-questions@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 645) id 3D2CF15298; Fri, 8 Oct 1999 17:02:45 -0700 (PDT) To: FreeBSD-questions@FreeBSD.org Subject: "The Complete FreeBSD", second edition: errata and addenda Message-Id: <19991009000245.3D2CF15298@hub.freebsd.org> Date: Fri, 8 Oct 1999 17:02:45 -0700 (PDT) From: grog@FreeBSD.ORG (Greg Lehey) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Errata and addenda for the Complete FreeBSD, second edition Last revision: 21 June 1999 The trouble with books is that you can't update them the way you can a web page or any other online documentation. The result is that most leading edge computer books are out of date almost before they are printed. Unfortunately, ``The Complete FreeBSD'', published by Walnut Creek, is no exception. In- evitably, a number of bugs and changes have surfaced. The following is a list of modifications which go beyond simple typos. They relate to the second edition, formatted on 16 December 1997. If you have this book, please check this list. If you have the first edition of 19 July 1996, please check ftp://ftp.lemis.com/pub/cfbsd/errata-1. This same file is also available via the web link http://www.lemis.com/. This list is available in four forms: o A PostScript version, suitable for printing out, at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ps. See page 222 of the book to find out how to print out PostScript. If at all possible, please take this document: it's closest to the original text. Be careful selecting this file with a web browser: it is often impossible to reload the document, and you may see a previously cached version. o An enhanced ASCII version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.txt. When viewed with more or less, this version will show some highlighting and underlining. It's not suitable for direct viewing. o An ASCII-only version at ftp://ftp.lemis.com/pub/cfbsd/errata-2.ascii. This version is posted every week to the FreeBSD-questions mailing list. Only take this version if you have real problems with PostScript: I can't be sure that the lack of different fonts won't confuse the meaning. o A web version at http://www.lemis.com/errata-2.html. All these modifications have been applied to the ongoing source text of the book, so if you buy a later edition, they will be in it as well. If you find a Page 1 The Complete FreeBSD bug or a suspected bug in the book, please contact me at General changes _______________ o In a number of places, I suggest the use of the following command to find process information: $ ps aux | grep foo Unfortunately, ps is sensitive to the column width of the terminal emulator upon which it is working. This command usually works fine on a relatively wide xterm, but if you're running on an 80-column terminal, it may truncate exactly the information you're looking for, so you end up with no output. You can fix that with the w option: $ ps waux | grep foo Thanks to Sue Blake for this information Location of the sample files ____________________________ On the 2.2.5 CD-ROM only, the location of the sample files does not match the specifications in the book (/book on the first CD-ROM). The 2.2.5 CD-ROM came out before the book, and it contains the files on the third (repository) CD-ROM as a single gzipped tar file /xperimnt/cfbsd/cfbsd.tar.gz. It contains the following files: drwxr-xr-x jkh/jkh 0 Oct 17 13:01 1997 cfbsd/ drwxr-xr-x jkh/jkh 0 Oct 17 13:01 1997 cfbsd/mutt/ -rw-r--r-- jkh/jkh 352 Oct 15 15:21 1997 cfbsd/mutt/.mail_aliases -rw-r--r-- jkh/jkh 9394 Oct 15 15:22 1997 cfbsd/mutt/.muttrc drwxr-xr-x jkh/jkh 0 Oct 17 14:02 1997 cfbsd/scripts/ -rw-r--r-- jkh/jkh 18281 Oct 16 16:52 1997 cfbsd/scripts/.fvwm2rc -rwxr-xr-x jkh/jkh 1392 Oct 17 12:54 1997 cfbsd/scripts/install-desktop -rw-r--r-- jkh/jkh 296 Oct 17 12:35 1997 cfbsd/scripts/.xinitrc -rwxr-xr-x jkh/jkh 622 Oct 17 13:51 1997 cfbsd/scripts/install-rcfiles -rw-r--r-- jkh/jkh 1133 Oct 17 13:00 1997 cfbsd/scripts/Uutry -rw-r--r-- jkh/jkh 1028 Oct 17 14:02 1997 cfbsd/scripts/README drwxr-xr-x jkh/jkh 0 Oct 18 19:32 1997 cfbsd/docs/ -rw-r--r-- jkh/jkh 199111 Oct 16 14:29 1997 cfbsd/docs/packages.txt Page 2 Errata and addenda for the Complete FreeBSD, second edition -rw-r--r-- jkh/jkh 189333 Oct 16 14:28 1997 cfbsd/docs/packages-by-category.txt -rw-r--r-- jkh/jkh 188108 Oct 16 14:29 1997 cfbsd/docs/packages.ps -rw-r--r-- jkh/jkh 226439 Oct 16 14:27 1997 cfbsd/docs/packages-by-category.ps -rw-r--r-- jkh/jkh 788 Oct 16 15:01 1997 cfbsd/README -rw-r--r-- jkh/jkh 248 Oct 17 11:52 1997 cfbsd/errata To extract one of these files, say cfbsd/docs/packages.txt, and assuming you have the CD-ROM mounted as /cdrom, enter: # cd /usr/share/doc # tar xvzf /cdrom/xperimnt/cfbsd/cfbsd.tar.gz cfbsd/docs/packages.txt See page 209 for more information on using tar. These files are an early version of what is described in the book. I'll put up some updated versions on ftp://ftp.lemis.com/ in the near future. Thanks to Frank McCormick for drawing this to my attention. Chapter 8: Setting up X11 _________________________ For FreeBSD 2.2.7, this chapter has changed sufficiently to make it impractical to distribute errata. You can download the PostScript version from ftp://www.lemis.com/pub/cfbsd/xsetup.ps, or the ASCII version from ftp://www.lemis.com/pub/cfbsd/xsetup.txt. No HTML version is available. Page xxxiv __________ Before the discussion of the shell prompts in the middle of the page, add: In this book, I recommend the use of the Bourne shell or one of its descendents (sh, bash, pdksh, ksh or zsh). With the exception of sh, they are all in the Ports Collection. I personally use the bash shell. This is a personal preference, and a recommendation, but it's not the standard shell. The standard BSD shell is the C shell (csh), which has a fuller- featured descendent tcsh. In particular, the standard installation sets the root user up with a csh. See page 152 (in this errata) for details of how to change the shell. Page 3 General changes Page 11: Reading the handbook _____________________________ The CD-ROM now includes Netscape. Replace the last paragraph on the page and the example on the following page with: If you're running X, you can use a browser like netscape to read the handbook. If you don't have X running yet, use lynx. Both of these programs are included on the CD-ROM. To install them, enter: # pkg_add /cdrom/packages/All/netscape-communicator-4.5.tgz or # pkg_add /cdrom/packages/All/lynx-2.8.1.1.tgz The numbers after the name (4.5 and 2.8.1.1) may change after this book has been printed. Use ls to list the names if you can't find these particular versions. Note that lynx is not a complete substitute for netscape: since it is text- only, it is not capable of displaying the large majority of web pages correctly. It will suffice for reading most of the handbook, however. Thanks to Stuart Henderson and for drawing this to my attention. Page 12: Printing the handbook ______________________________ The instructions for formatting the handbook are obsolete. Replace the section starting Alternatively, you can print out the handbook with the following text: Alternatively, you can print out the handbook. You need to have the documentation sources (/usr/doc) installed on your system. You can find them on the second CD-ROM in the directory of the same name. To install them, first mount your CD-ROM (see page 175). Then enter: $ cd /cdrom/usr/doc/handbook $ mkdir -p /usr/doc/handbook you may need to be root for this operation $ cp -pr * /usr/doc/handbook You have a choice of formats for the output: o ascii will give you plain 7-bit ASCII output, suitable for reading on a character-mode terminal. Page 4 Errata and addenda for the Complete FreeBSD, second edition o html will give you HTML output, suitable for browsing with a web browser. o latex will give you LATEX format, suitable for further processing with TEX and LATEX. o ps will give you PostScript output, probably the best choice for printing. o roff will give you output in troff source. You can process this output with nroff or troff, but it's currently not very polished. LATEX output is a better choice if you want to process it further. Once you have decided your format, use make to create the document. For example, if you decide on PostScript format, you would enter: $ make FORMATS=ps This creates a file handbook.ps which you can then print to a PostScript printer or with the aid of ghostscript (see page 222). Thanks to Bob Beer for drawing this to my attention. Page 45: Preparing floppies for installation _____________________________________________ Replace the paragraph below the list of file names (in the middle of the page) with: The floppy set should contain the file bin.inf and the ones whose names start with bin. followed by two letters. These other files are all 240640 bytes long, except for the final one which is usually shorter. Use the MS-DOS COPY program to copy as many files as will fit onto each disk (5 or 6) until you've got all the distributions you want packed up in this fashion. Copy each distribution into subdirectory corresponding to the base name--for example, copy the bin distribution to the files A:\BIN\BIN.INF, A:\BIN\BIN.AA and so on. Page 80 and 81 ______________ In a couple of examples, the FreeBSD partition is shown as type 164. It should be 165. Thanks to an unknown contributer for this correction (sorry, I lost your name). Page 5 General changes Page 88: setting up for dumping _______________________________ The example mentions a variable savecore in /etc/rc.conf. This variable is no longer used--it's enough to set the variable dumpdev. Page 92 _______ At the end of the section How to install a package add the text: Alternatively, you can install packages from the /stand/sysinstall Final Configuration Menu. We saw this menu on page in figure 4-14 on page 71. When you start sysinstall from the command line, you get to this menu by selecting Index, and then selecting Configure. Page 93 _______ Before the heading Install ports from the first CD-ROM add: Install ports when installing the system ________________________________________ The file ports/ports.tgz on the first CD-ROM is a tar archive containing all the ports. You can install it with the base system if you select the Custom distribution and include the ports collection. If you didn't install them at the time, use the following method to install them all (about 40 MB). Make sure your CD-ROM is mounted (in this example on /cdrom), and enter: Page 96 _______ Replace the example at the top of the page with: Instead, do: # cd /cd4/ports/distfiles # mkdir -p /usr/ports/distfiles make sure you have a distfiles directory # for i in *; do > ln -s /cd4/ports/distfiles/$i /usr/ports/distfiles/$i > done Page 6 Errata and addenda for the Complete FreeBSD, second edition If you're using csh or tcsh, enter: # cd /cd4/ports/distfiles # mkdir -p /usr/ports/distfiles make sure you have a distfiles directory # foreach i (*) ? ln -s /cd4/ports/distfiles/$i /usr/ports/distfiles/$i ? end Thanks to Christopher Raven and Francois Jacques for drawing this to my attention. Page 104 ________ The examples at the bottom of the page and the top of the next page specify the wrong directory (/usr). It should be /usr/X11R6. Replace the examples with: For a full install, choose /cdrom/dists/XF86331/X331*.tgz. If you are using sh, enter: # cd /usr/X11R6 # for i in /cdrom/dists/XF86331/X331*.tgz; do # tar xzf $i # done If you are using csh, enter: % cd /usr/X11R6 % foreach i (/cdrom/dists/XF86331/X331*.tgz) % tar xzf $i % end For a minimal installation, first choose a server archive corresponding to your VGA board. If table 8-2 on page 103 doesn't give you enough information, check the server man pages, starting on page 1545, which list the VGA chip sets supported by each server. For example, if you have an ET4000 based board you will use the XF86_SVGA server. In this case you would enter: # cd /usr/X11R6 # tar xzf /cdrom/dists/XF86331/X331SVGA.tgz substitute your server name here # for i in bin fnts lib xicf; do # tar xzf /cdrom/dists/XF86331/X331$i.tgz # done Page 7 Install ports when installing the system If you are using csh, enter: % cd /usr/X11R6 % tar xzf /cdrom/dists/XF86331/X331SVGA.tgz substitute your server name here % foreach i (bin fnts lib xicf) % tar xzf /cdrom/dists/XF86331/$i % end Thanks to Manuel Enrique Garcia Cuesta for pointing out this one. Page 128 ________ Replace the complete text below the example with the following: These values are defaults, and many are either incorrect for FreeBSD (for example the device name /dev/com1) or do not apply at all (for example Xqueue). If you are configuring manually, select one Protocol and one Device entry from the following selection. If you must use a two-button mouse, uncomment the keyword Emulate3Buttons--in this mode, pressing both mouse buttons simultane- ously within Emulate3Timeout milliseconds causes the server to report a middle button press. Section "Pointer" Protocol "Microsoft" for Microsoft protocol mice Protocol "MouseMan" for Logitech mice Protocol "PS/2" for a PS/2 mouse Protocol "Busmouse" for a bus mouse Device "/dev/ttyd0" for a mouse on the first serial port Device "/dev/ttyd1" for a mouse on the second serial port Device "/dev/ttyd2" for a mouse on the third serial port Device "/dev/ttyd3" for a mouse on the fourth serial port Device "/dev/psm0" for a PS/2 mouse Device "/dev/mse0" for a bus mouse Emulate3Buttons only for a two-button mouse EndSection You'll notice that the protocol name does not always match the manufacturer's Page 8 Errata and addenda for the Complete FreeBSD, second edition name. In particular, the Logitech protocol only applies to older Logitech mice. The newer ones use either the MouseMan or Microsoft protocols. Nearly all modern serial mice run one of these two protocols, and most run both. If you are using a bus mouse or a PS/2 mouse, make sure that the device driver is included in the kernel. The GENERIC kernel contains drivers for both mice, but the PS/2 driver is disabled. Use UserConfig (see page 50) to enable it. Page 140 ________ Just before the paragraph The super user add the following paragraph: If you do manage to lose the root password, all may not be lost. Reboot the machine to single user mode (see page 157), and enter: # mount -u / mount root file system read/write # mount /usr mount /usr file system (if separate) # passwd root change the password for root Enter new password: Enter password again: # ^D enter ctrl-D to continue with startup If you have a separate /usr file system (the normal case), you need to mount it as well, since the passwd program is in the directory /usr/bin. Note that you should explicitly state the name root: in single user mode, the system doesn't have the concept of user IDs. Page 148 ________ Replace the text at the top of the page with: Modern shells supply command line editing which resembles the editors vi or Emacs. In bash, sh, ksh, and zsh you can make the choice by entering Page 152 ________ After figure 10-8, add the following text: It would be tedious for every user to put settings in their private initialization files, so the shells also read a system-wide default file. For the Bourne shell family, it is /etc/profile, while the C shell family has three Page 9 Install ports when installing the system files: /etc/csh.login to be executed on login, /etc/csh.cshrc to be executed when a new shell is started after you log in, and /etc/csh.logout to be executed when you stop a shell. The start files are executed before the corresponding individual files. In addition, login classes (page 141) offer another method of setting environment variables at a global level. Changing your shell ___________________ The FreeBSD installation gives root a C shell, csh. This is the traditional Berkeley shell, but it has a number of disadvantages: command line editing is very primitive, and the script language is significantly different from that of the Bourne shell, which is the de facto standard for shell scripts: if you stay with the C shell, you may still need to understand the Bourne shell. The latest version of the Bourne shell sh also includes some command line editing. See page 148 for details of how to enable it. You can get better command line editing with tcsh, in the Ports Collection. You can get both better command line editing and Bourne shell syntax with bash, also in the Ports Collection. If you have root access, you can use vipw to change your shell, but there's a more general way: use chsh (Change Shell). Simply run the program. It starts your favourite editor (as defined by the EDITOR environment variable). Here's an example before: #Changing user database information for velte. Shell: /bin/csh Full Name: Jack Velte Location: Office Phone: Home Phone: You can change anything after the colons. For example, you might change this to: #Changing user database information for velte. Shell: /usr/local/bin/bash Full Name: Jack Velte Location: On the road Office Phone: +1-408-555-1999 Home Phone: Page 10 Errata and addenda for the Complete FreeBSD, second edition chsh checks and updates the password files when you save the modifications and exit the editor. The next time you log in, you get the new shell. chsh tries to ensure you don't make any mistakes--for example, it won't let you enter the name of a shell which isn't mentioned in the file /etc/shells--but it's a very good idea to check the shell before logging out. You can try this with su, which you normally use to become super user: bumble# su velte Password: su-2.00$ note the new prompt There are a couple of problems in using tcsh or bash as a root shell: o The shell for root must be on the root file system, otherwise it will not work in single user mode. Unfortunately, most ports of shells put the shell in the directory /usr/local/bin, which is almost never on the root file system. o Most shells are dynamically linked: they rely on library routines in files such as /usr/lib/libc.a. These files are not available in single user mode, so the shells won't work. You can solve this problem by creating statically linked versions of the shell, but this requires programming experience beyond the scope of this book. If you can get hold of a statically linked version, perform the following steps to install it: o Copy the shell to /bin, for example: # cp /usr/local/bin/bash /bin o Add the name of the shell to /etc/shells, in this example the line in bold print: # List of acceptable shells for chpass(1). # Ftpd will not allow users to connect who are not using # one of these shells. /bin/sh /bin/csh /bin/bash You can then change the shell for root as described above. Page 11 Install ports when installing the system Thanks to Lars Koller for drawing this to my attention. Page 160 ________ Replace the text at the fourth bullet with the augmented text: The second-level boot locates the kernel, by default the file /kernel on the root file system, and loads it into memory. It prints the Boot: prompt at this point so that you can influence this choice--see the man page on page 579 for more details of what you can enter at this prompt. Page 169 ________ Replace the last paragraph on the page with: The standard solution for these problems is to relocate the /tmp file system to a different directory, say /usr/tmp, and create a symbolic link from /usr/tmp to /tmp--see Chapter 4, Installing FreeBSD, page 72, for more details. Thanks to Charlie Sorsby for drawing this to my attention. Page 176 ________ Add the following paragraph Unmounting file systems When you mount a file system, the system assumes it is going to stay there, and in the interests of efficiency it delays writing data back to the file system. This is the same effect we discussed on page 158. As a result, if you want to stop using a file system, you need to tell the system about it. You do this with the umount command. Note the spelling--there's no n in the command name. You need to do this even with read-only media such as CD-ROMs: the system assumes it can access the data from a mounted file system, and it gets quite unhappy if it can't. Where possible, it locks removable media so that you can't remove them from the device until you unmount them. Using umount is straightforward: just tell it what to unmount, either the device name or the directory name. For example, to unmount the CD-ROM we Page 12 Errata and addenda for the Complete FreeBSD, second edition mounted in the example above, you could enter one of these commands: # umount /dev/cd1a # umount /cd1 Before unmounting a file system, umount checks that nobody is using it. If somebody is using it, it will refuse to unmount it with a message like umount: /cd1: Device busy. This message often occurs because you have changed your directory to a directory on the file system you want to remove. For example (which also shows the usefulness of having directory names in the prompt): === root@freebie (/dev/ttyp2) /cd1 16 -> umount /cd1 umount: /cd1: Device busy === root@freebie (/dev/ttyp2) /cd1 17 -> cd === root@freebie (/dev/ttyp2) ~ 18 -> umount /cd1 === root@freebie (/dev/ttyp2) ~ 19 -> Thanks to Ken Deboy for pointing out this omission. Page 180 ________ The example in the middle of the page should read: For example, to generate a second set of 32 pseudo-terminals, enter: # cd /dev # ./MAKEDEV pty1 You can generate up to 256 pseudo-terminals. They are named ttyp0 through ttypv, ttyq0 through ttyqv, ttyr0 through ttyrv, ttys0 through ttysv, ttyP0 through ttyPv, ttyQ0 through ttyQv, ttyR0 through ttyRv and ttyS0 through ttySv. To create each set of 32 terminals, use the number of the set: the first set is pty0, and the eighth set is pty7. Note that some processes, such as xterm, only look at ttyp0 through ttysv. Thanks to Karl Wagner for pointing out this error. Page 197, first line ____________________ The text of the first full sentence reads: Page 13 Install ports when installing the system The first name, up the the symbol, is the label. In fact, it should read: The first name, up to the | symbol, is the label. Page 208, middle of page ________________________ The example shows the file name /dev/rst0 when using the Bourne shell, and /dev/nrst0 when using C shell and friends. This is inconsistent; use /dev/nrst0 with any shell if you want a non-rewinding tape, or /dev/rst0 if you want a rewinding tape. Thanks to Norman C Rice for pointing out this one. Page 219 ________ Before the section Testing the spooler add the following section: As we saw above, the line printer daemon lpd is responsible for printing spooled jobs. By default it isn't started at boot time. If you're root, you can start it by name: # lpd Normally, however, you will want it to be started automatically when the system starts up. You do this by setting the variable lpd_enable in /etc/rc.conf: lpd_enable="YES" # Run the line printer daemon See page for more details of /etc/rc.conf. Another line in /etc/rc.conf refers to the line printer daemon: lpd_flags="" # Flags to lpd (if enabled). You don't normally need to change this line. See the man page for lpd for details of the flags. Thanks to Tommy G. James for bringing this to my attention. Page 14 Errata and addenda for the Complete FreeBSD, second edition Page 231 ________ Replace the first line of the example with: xhost presto bumble gw The original version allowed anybody on the Internet to access your system. Thanks to Jerry Dunham for drawing this one to my attention. Page 237 ________ In the section Installing the sample desktop, replace the first paragraph with: You'll find all the files described in this chapter on the first CD-ROM (Installation CD-ROM) in the directory /book. Remember that you must mount the CD-ROM before you can access the files--see page 175 for further details. The individual scripts are in the directory /book/scripts, but you'll probably find it easier to install them with the script install-desktop: Thanks to Chris Kaiser for drawing this to my attention. Page 242 ________ The instructions for extracting the source files from CD-ROM in the middle of page 242 are incorrect. You'll find the kernel sources on the first CD-ROM in the directory /src. Replace the example with: # mkdir -p /usr/src/sys # ln -s /usr/src/sys /sys # cd / # cat /cdrom/src/ssys.[a-d]* | tar xzvf - Thanks to Raymond Noel , Suttipan Limanond and Satwant for finding this one in several small slices. Page 15 Install ports when installing the system Page 257 ________ Replace the paragraph Berkeley Packet Filter with: pseudo-device bpfilter ______________________ The Berkeley Packet Filter (bpf) allows you to capture packets crossing a network interface to disk or to examine them with the tcpdump program. Note that this capability represents a significant compromise of network security. The number after bpfilter is the number of concurrent processes that can use the facility. Not all network interfaces support bpf. In order to use the Berkeley Packet Filter, you must also create the device nodes /dev/bpf0 to /dev/bpf3 (if you're using the default number 4). Current- ly, MAKEDEV doesn't help much--you need to create each device separately: # cd /dev # ./MAKEDEV bpf0 # ./MAKEDEV bpf1 # ./MAKEDEV bpf2 # ./MAKEDEV bpf3 Thanks to Christopher Raven for drawing this to my attention. Page 264 ________ In the list of disk driver flags, add: o Bit 12 (0x1000) enables LBA (logical block addressing mode). If this bit is not set, the driver accesses the disk in CHS (cylinder/head/sector) mode. o In CHS mode, if bits 11 to 8 are not equal to 0, they specify the number of heads to assume (between 1 and 15). The driver recalculates the number of cylinders to make up the total size of the disk. Page 16 Errata and addenda for the Complete FreeBSD, second edition Page 273, ``Building the kernel'' _________________________________ Replace the example with: Next, change to the build directory and build the kernel: # cd ../../compile/FREEBIE # make depend # make The make depend is needed even if the directory has just been created: apart from creating dependency information, it also creates some files needed for the build. Thanks to Mark Ovens for drawing this to my attention. Page 283, ``Creating the source tree'' ______________________________________ Add a third point to what you need to know: 3. Possibly, the date of the last update that you want to be included in the checkout. If you specify this date, cvs ignores any more recent updates. This option is often useful when somebody discovers a recently introduced bug in -CURRENT: you check out the modules as they were before the bug was introduced. You specify the date with the -D option, for example -D "10 December 1997". Page 285, after the second example. ___________________________________ Add the text: If you need to check out an older version, for example if there are problems with the most recent version of -CURRENT, you could enter: # cvs co -D "10 December 1997" src/sys This command checks out the kernel sources as of 10 December 1997. Page 17 Install ports when installing the system Page 294 ________ Add the following section: Problems executing Linux binaries _________________________________ One of the problems with the ELF format used by more recent Linux binaries is that they usually contain no information to identify them as Linux binaries. They might equally well be BSD/OS or UnixWare binaries. That's not really a problem at this point, since the only ELF format that FreeBSD 3.2 understands is Linux, but FreeBSD-CURRENT recognizes a native FreeBSD ELF format as well, and of course that's the default. If you want to run a Linux ELF binary on such a system, you must brand the executable using the program brandelf. For example, to brand the StarOffice program swriter3, you would enter: # brandelf -t linux /usr/local/StarOffice-3.1/linux-x86/bin/swriter3 Thanks to Dan Busarow for bringing this to my attention. Page 364, middle of page ________________________ Change the text from: The names MYADDR and HISADDR are keywords which represent the addresses at each end of the link. They must be written as shown, though they may be in lower case. to The names MYADDR and HISADDR are keywords which represent the addresses at each end of the link. They must be written as shown, though newer versions of ppp allow you to write them in lower case. Thanks to Mark S. Reichman for this correction. Page 368 ________ Replace the paragraph after the second example with: In FreeBSD version 3.0 and later, specify the options PPP_BSDCOMP and Page 18 Errata and addenda for the Complete FreeBSD, second edition PPP_DEFLATE to enable two kinds of compression. You'll also need to specify the corresponding option in Kernel PPP's configuration file. These options are not available in FreeBSD version 2. Thanks to Brian Somers for this information. Page 397 ________ In the section ``Nicknames'', the example should read: www IN CNAME freebie ftp IN CNAME presto In other words, there should be a space between CNAME and the system name. Page 422 ________ Replace the text above the example with: tcpdump is a program which monitors a network interface and displays selected information which passes through it. It uses the Berkeley Packet Filter (bpf), an optional component of the kernel. It is not included in the GENERIC kernel: see page 257 for information on how to configure it. If you don't configure the Berkeley Packet Filter, you will get a message like tcpdump: /dev/bpf0: device not configured If you forget to create the devices for bpf, you will get a message like: tcpdump: /dev/bpf0: No such file or directory Since tcpdump poses a potential security problem, you must be root in order to run it. The simplest way to run it is without any parameters. This will cause tcpdump to monitor and display all traffic on the first active network interface, normally Ethernet: Thanks to Christopher Raven for drawing this to my attention. Page 19 Install ports when installing the system Page 423 ________ The description at the top of the page incorrectly uses the term IP address instead of Ethernet address. In addition, a page number reference is incorrect. Replace the paragraph with: o Line 1 shows an ARP request: system presto is looking for the Ethernet address of wait. It would appear that wait is currently not responding, since there is no reply. o Line 2 is not an IP message at all. tcpdump shows the Ethernet addresses and the beginning of the packet. We don't consider this kind of request in this book. o Line 3 is a broadcast ntp message. We looked at ntp on page 160. o Line 4 is another attempt by presto to find the IP address of wait. o Line 5 is a broadcast message from bumble on the rwho port, giving information about its current load averages and how long it has been up. See the man page for rwho on page 1167 for more information. o Line 6 is from a TCP connection between port 6000 on freebie and port 1089 on presto. It is sending 384 bytes (with the sequence numbers 536925467 to 536925851; see page 305), and is acknowledging that the last byte it received from presto had the sequence number 325114346. The window size is 17280. o Line 7 is another ARP request. presto is looking for the Ethernet address of freebie. How can that happen? We've just seen that they have a TCP connection. In fact, ARP information expires after 20 minutes. It's quite possible that all connections between presto and freebie have been dormant for this period, so presto needs to find freebie's IP address again. o Line 8 is the ARP reply from freebie to presto giving its Ethernet address. o Line 9 shows a reply from presto on the connection to freebie that we saw on line 6. It acknowledges the data up to sequence number 536925851, but doesn't send any itself. o Line 10 shows another 448 bytes of data from freebie to presto, and acknowledging the same sequence number from presto as in line 6. Thanks to Sergei S. Laskavy for drawing this to my Page 20 Errata and addenda for the Complete FreeBSD, second edition attention. Page 450: anonymous ftp _______________________ Replace the paragraph starting with Create a user ftp: Create a user ftp, with the anonymous ftp directory as the home directory and the shell /dev/null. Using /dev/null as the shell makes it impossible to log in as user ftp, but does not interfere with the use of anonymous ftp. ftp can be a member of group bin, or you can create a new group ftp by adding the group to /etc/group. See page 138 for more details of adding users, and the man page on page 805 for adding groups. Thanks to Mark S. Reichman for drawing this to my attention. Page 466, before the ps example _______________________________ Add another bullet: o Finally, you may find it convenient to let some other system handle all your mail delivery for you: you just send anything you can't deliver locally to this other host, which sendmail calls a smart host. This is particularly convenient if you send your mail with UUCP. To tell sendmail to use a smart host (in our case, mail.example.net), find the following line in sendmail.cf: # "Smart" relay host (may be null) DS Change it to: # "Smart" relay host (may be null) DSmail.example.net Page 478, ``Running Apache'' ____________________________ The text describes the location of the server as /usr/local/www/server/httpd. This appears to depend on where you get the port from. Some people report the file being at the more likely location /usr/local/sbin/httpd (though note the Page 21 Install ports when installing the system directory sbin, not bin). Check both locations if you run into trouble. Thanks to Sue Blake for this information. Page 492 ________ Replace references to nmdb with nmbd. Page 493 ________ Replace the last paragraph on the page with: socket options is hardly mentioned in the documentation, but it's very important: many Microsoft implementations of TCP/IP are inefficient and establish a new TCP more often than necessary. Select the socket options TCP_NODELAY and IPTOS_LOWDELAY, which can speed up the response time of such applications by over 95%. Page 22 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 18:30:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 027FF158AF for ; Fri, 8 Oct 1999 18:30:04 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id VAA22414; Fri, 8 Oct 1999 21:32:43 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910090132.VAA22414@cc942873-a.ewndsr1.nj.home.com> Subject: Re: cdrecord question In-Reply-To: from "Jeremy L. Stock" at "Oct 7, 1999 11:53:31 pm" To: jstock@visi.com (Jeremy L. Stock) Date: Fri, 8 Oct 1999 21:32:43 -0400 (EDT) Cc: cjclark@home.com, freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=UNKNOWN-8BIT Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Jeremy L. Stock wrote, > On Thu, 7 Oct 1999, Crist J. Clark wrote: > > >Jeremy L. Stock wrote, > >> I recently installed a Traxdata SCSI CDRW drive My SCSI controller is an > >> Adeptec AVA 2906K both it and the CDRW get detected ok. From dmesg: > >> > >> ahc0: rev 0x03 int a irq 5 on pci0.10.0 > >> ahc0: aic7850 Single Channel A, SCSI Id=7, 3/255 SCBs > >> cd0 at ahc0 bus 0 target 4 lun 0 > >> cd0: Removable CD-ROM SCSI-2 device > >> cd0: 10.000MB/s transfers (10.000MHz, offset 15) > >> cd0: Attempt to query device size failed: NOT READY, Medium not present > >> cd9660: Joliet Extension > >> > >> However, when I run cdrecord -scanbus it returns > >> cdrecord: No such file or directory. Cannot open SCSI driver. > >> > >> Any ideas as to what's wrong would be appreciated. > > > >Hmmm... do you have /dev/ssc and /dev/pass0? > > > > I didn't have /dev/ssc but /dev/pass0 was there. I still see the same result > after ./MAKEDEV ssc. I'm running FreeBSD 3.3-STABLE since I left that out > earlier. On the machine I usually burn CDs on, ahc0: rev 0x01 int a irq 9 on pci0.13.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs . . . cd0 at ahc0 bus 0 target 2 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Logical unit not ready, cause not reportable And I get the following, # cdrecord -scanbus Cdrecord release 1.8a22 Copyright (C) 1995-1999 Jörg Schilling scsibus0: 0) * 1) * 2) 'HP ' 'CD-Writer 6020 ' '1.07' Removable CD-ROM 3) * 4) 'iomega ' 'jaz 2GB ' 'E.15' Removable Disk 5) * 6) * 7) * Note that cdrecord version change _fast_. I just looked and I see we at least to 1.8a29. I had a look at the source... non-trivial matter to figure out what device it is trying to open. It would be nice if the error output actually said. Maybe hack the source to get that output. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 18:58:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from binky.de.uu.net (binky.de.uu.net [192.76.144.28]) by hub.freebsd.org (Postfix) with ESMTP id 44EE714BD3 for ; Fri, 8 Oct 1999 18:58:51 -0700 (PDT) (envelope-from CHUETTL@ahorn.sgh.uunet.de) Received: from huettl (pec-19-110.tnt2.b.uunet.de [149.225.19.110]) by binky.de.uu.net (5.5.5/5.5.5) with ESMTP id DAA06928 for ; Sat, 9 Oct 1999 03:58:49 +0200 (MET DST) Received: from Spooler by huettl (Mercury/32 v2.16); 9 Oct 99 04:00:17 +0200 Received: from spooler by ahorn.sgh.uunet.de (Mercury/32 v2.16); 9 Oct 99 00:38:53 +0200 From: "Carsten Huettl" Organization: ahorn.Net To: Lowell Gilbert , freebsd-questions@FreeBSD.org, thierry.herbelot@alcatel.fr Date: Sat, 9 Oct 1999 00:37:01 +0200 Subject: Re: make depend fails References: "Carsten Huettl"'s message of Fri, 8 Oct 1999 12:10:44 +0200 In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.01d) Message-ID: <258F8E4D14BD@ahorn.sgh.uunet.de> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG To: "Carsten Huettl" Subject: Re: make depend fails From: Lowell Gilbert Date sent: 08 Oct 1999 08:53:19 -0400 > > aicasm_gram.o: file not recognized: File format not recognized > > *** Error code 1 > > > > Stop. > > *** Error code 1 > > > > So what can I do to resolve the problem? > > Just a guess, but maybe you should delete the build directory > (/usr/src/sys/compile/{whatever}). Also, your kernel configuration > file might not be valid any more; look at the changes to GENERIC (or, > preferably, start reconfiguring again, starting from the GENERIC > config for the 3.2 release you're trying to use.  Thank you, deleting the old ../compile/MYKERNEL helps. It keeps files from the old v.2.2.8 Version and this coould not work. Now I remember: I think in Linux there is a command that deletes old compile files and directories... tnx again. C. -- Carsten Huettl - pgp-key on request To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 19: 8:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from sanson.reyes.somos.net (freyes.static.inch.com [207.240.212.43]) by hub.freebsd.org (Postfix) with SMTP id 35FE7152CC for ; Fri, 8 Oct 1999 19:08:22 -0700 (PDT) (envelope-from fran@sanson.reyes.somos.net) Received: from tomasa ([10.0.0.11]) by sanson.reyes.somos.net ; Fri, 08 Oct 1999 22:06:36 -3736621 From: "Francisco Reyes" To: "chris@tourneyland.com" , "freebsd-questions@freebsd.org" Date: Fri, 08 Oct 1999 22:09:03 -0400 Reply-To: "Francisco Reyes" X-Mailer: PMMail 98 Professional (2.01.1600) For Windows 98 (4.10.1998) MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: Re: MySQL layout question Message-ID: <93943479601@reyes.somos.net> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Tue, 05 Oct 1999 01:24:47 -0500, chris@tourneyland.com wrote: >Can anyone tell me why MySQL would have done this? I figure their reason is >probably interesting and enlightening (at least to a newguy like me). You would be happier if you installed from ports instead of trying to get the sources directly. Installing from ports is documented in the handbook... let us know if you have problems... If you have space it will be much better if you install the ports collection.. failing that then just be aware that you need to have both the client and the server for mysql. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 19:23:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.netville.com.br (ns2.netville.com.br [200.215.101.2]) by hub.freebsd.org (Postfix) with ESMTP id 0A2DE14BD3 for ; Fri, 8 Oct 1999 19:23:40 -0700 (PDT) (envelope-from sayao@netville.com.br) Received: from Sayao (r108p27.ppp.netville.com.br [200.215.101.187]) by mail.netville.com.br (8.9.3/8.9.3) with SMTP id XAA02347 for ; Fri, 8 Oct 1999 23:18:58 -0300 Message-ID: <000b01bf11a0$d07c2660$cc2ffea9@Sayao> From: "Thiago Sayao" To: Subject: /usr/local Date: Fri, 8 Oct 1999 12:21:36 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG the ./configure script are not finding the *.h (includes) and *.so (libs) that is in the /usr/local directory the libs are in the ldconfig_path and it is in the ld.so hints too. if i move the libs to other directory like /usr/lib and the includes to /usr/include it works fine i'm confused! if you are Sheldon Hearn, thanks for answering the my other question, it helped i lot! i've solved that! but this litte problem is still behind me.. :) i hope you understand my english.. thaks, Thiago Sayao To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 19:57:35 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.safepages.com (smtp.safepages.com [192.41.32.27]) by hub.freebsd.org (Postfix) with ESMTP id BC1EE14C83 for ; Fri, 8 Oct 1999 19:57:33 -0700 (PDT) (envelope-from jason@welsh.dynip.com) Received: from welsh.dynip.com (01-020.038.popsite.net [209.198.10.20]) by smtp.safepages.com (8.8.5) id UAA11422; Fri, 8 Oct 1999 20:57:27 -0600 (MDT) X-Authentication-Warning: smtp.safepages.com: Host 01-020.038.popsite.net [209.198.10.20] claimed to be welsh.dynip.com Received: (qmail 13733 invoked by uid 1000); 9 Oct 1999 02:56:34 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 02:56:34 -0000 Date: Fri, 8 Oct 1999 22:56:34 -0400 (EDT) From: jason To: freebsd-questions@freebsd.org Subject: hiding directories on ftp server Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG can this be done with the default ftp server for FreeBSD 3.2 ?? what i want to do is have a directory under pub that users cannot see but can cd into and download stuff if i tell them the exact filename.. also, so that they cant see the directory or whats in it.. or would i need some other ftp daemon? regards, Jason -- ======================================================================= | Jason Welsh jason@welsh.dynip.com | If you think there's | | | good in everybody, you | | http://welsh.dynip.com/ | haven't met everybody. | ======================================================================= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 20: 8:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id E33F014E9A for ; Fri, 8 Oct 1999 20:08:53 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id UAA13382; Fri, 8 Oct 1999 20:27:36 -0700 (PDT) Date: Fri, 8 Oct 1999 20:27:36 -0700 (PDT) From: Alfred Perlstein To: Thiago Sayao Cc: questions@FreeBSD.ORG Subject: Re: /usr/local In-Reply-To: <000b01bf11a0$d07c2660$cc2ffea9@Sayao> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, Thiago Sayao wrote: > the ./configure script are not finding the *.h (includes) and *.so (libs) > that is in the /usr/local directory > the libs are in the ldconfig_path and it is in the ld.so hints too. > if i move the libs to other directory like /usr/lib and the includes to > /usr/include it works fine > i'm confused! > > if you are Sheldon Hearn, thanks for answering the my other question, it > helped i lot! > i've solved that! but this litte problem is still behind me.. :) export C_INCLUDE_PATH=/usr/local/include export LD_LIBRARY_PATH=/usr/local/lib you can also use ':' seperated entries like so: export C_INCLUDE_PATH=/usr/local/include:/usr/X11R6/include enjoy -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 20:22:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 13DE715052 for ; Fri, 8 Oct 1999 20:22:35 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id XAA22744; Fri, 8 Oct 1999 23:24:56 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910090324.XAA22744@cc942873-a.ewndsr1.nj.home.com> Subject: Re: hiding directories on ftp server In-Reply-To: from jason at "Oct 8, 1999 10:56:34 pm" To: jason@welsh.dynip.com (jason) Date: Fri, 8 Oct 1999 23:24:55 -0400 (EDT) Cc: freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG jason wrote, > can this be done with the default ftp server for FreeBSD 3.2 ?? > what i want to do is have a directory under pub that users cannot see > but can cd into and download stuff if i tell them the exact filename.. > also, so that they cant see the directory or whats in it.. > or would i need some other ftp daemon? Really has nothing to do with ftpd. On a directory, 'read' permission allows someone to 'ls' the directory. 'Execute' permission alows people to get at files in the directory. Just give it execute permission, e.g. 551, to the users and they need a full pathname (or an intense dictionary atack) to get a a file. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 21:43:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 0247814FAC for ; Fri, 8 Oct 1999 21:43:44 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id OAA09839; Sat, 9 Oct 1999 14:13:35 +0930 (CST) Date: Sat, 9 Oct 1999 14:13:34 +0930 From: Greg Lehey To: r_owan@one.net.au Cc: questions@FreeBSD.ORG Subject: Re: /dev/rsa0 and 'tar' Message-ID: <19991009141334.S78191@freebie.lemis.com> References: <19991008232957.6C669151F3@hub.freebsd.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991008232957.6C669151F3@hub.freebsd.org> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Saturday, 9 October 1999 at 9:23:14 +1000, r_owan@one.net.au wrote: > I have just bought the FreeBSD 3.2 CD set, and have successfully > installed it, and gotten many things (such as X windows) to work. > > The problem i have is when i try to use the 'tar -x' command, it > responds with "tar:can't open /dev/rsa0: Device not configured". > What does /dev/rsa0 represent? The first tape unit in the system. > How can i fix this so i can run tar? You don't even say if you have a tape, let alone whether the system doesn't handle it. If you have a different archive file, you can either set the environment variable TAPE to its name (for example, /dev/rsa1 for the second tape unit), or use the -f option to tar if you're working from a file (for example, tar xf foo.tar). Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 21:53: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from emu.sourcee.com (emu.sourcee.com [205.181.251.129]) by hub.freebsd.org (Postfix) with ESMTP id A258114FAC for ; Fri, 8 Oct 1999 21:53:03 -0700 (PDT) (envelope-from nrice@emu.sourcee.com) Received: (from nrice@localhost) by emu.sourcee.com (8.9.3/8.9.3) id AAA06936; Sat, 9 Oct 1999 00:52:57 -0400 (EDT) Date: Sat, 9 Oct 1999 00:52:57 -0400 From: "Norman C. Rice" To: Guillaume Paquet Cc: freebsd-questions@FreeBSD.ORG Subject: Re: ifconfig and route Message-ID: <19991009005256.A6835@emu.sourcee.com> References: <002301bf11e7$d4f978e0$0201a8c0@cgocable.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <002301bf11e7$d4f978e0$0201a8c0@cgocable.ca> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 07:49:58PM -0400, Guillaume Paquet wrote: > Is there a way with ifconfig and route to configure a class C in only one > command, instead of doing the commands for every IP? Perhaps 'route add -net destination gateway' or the using 'netmask 0xffffff00' with ifconfig does what you're looking for. See route(8) and ifconfig(8) for details. > Guillaume Paquet > foub@globetrotter.net -- Regards, Norman C. Rice, Jr. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22: 6: 3 1999 Delivered-To: freebsd-questions@freebsd.org Received: from posgate.acis.com.au (posgate.acis.com.au [203.14.230.14]) by hub.freebsd.org (Postfix) with ESMTP id 95BC714DF3 for ; Fri, 8 Oct 1999 22:05:57 -0700 (PDT) (envelope-from andymac@bullseye.apana.org.au) Received: from bullseye.apana.org.au (uucp@localhost) by posgate.acis.com.au (8.9.2/8.9.2/Debian/GNU) with UUCP id OAA12124; Sat, 9 Oct 1999 14:58:34 +1000 (EST) Received: from bullseye.apana.org.au (central.apana.org.au [203.9.107.245]) by bullseye.apana.org.au (8.8.8/8.8.8) with SMTP id MAA15389; Sat, 9 Oct 1999 12:31:40 +1000 (EST) (envelope-from andymac@bullseye.apana.org.au) Date: Sat, 9 Oct 1999 12:27:58 +1000 (EST) From: Andrew MacIntyre To: Darren Foo Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Network printing with apsfilter (was HP Laserjet 1100) In-Reply-To: <37FD228A.3868D228@ca.webct.com> Message-ID: X-X-Sender: andymac@bullseye.apana.org.au MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Thu, 7 Oct 1999, Darren Foo wrote: > network printing working. The apsfilter setup said that freebsd > supported network printing with the apsfilter. On the printer machine, I > added the remote machine to hosts.lpd. And on the remote machine I > added: > > lp|lj|ps|remote Laserjet 1100 printer:\ > :sh:\ > :rm=ws74:sd=/var/spool/lpd/rlp:lf=/var/log/lpd-errs: > > I used lp since the remote machines don't have their own printers. > Anyhow, when I try to print it gets into queue but says: lpd: Your host > does not have line printer access. Anyone have this working? On the access issue, you should man lpd, because IIRC you need to fiddle with /etc/{hosts.allow|hosts.deny}. Also I notice you don't have an "rp=" entry in the printcap, so I'm not sure whether the lpd defaults to trying the same queue name. -- Andrew I MacIntyre "These thoughts are mine alone..." E-mail: andrew.macintyre@aba.gov.au (work) | Snail: PO Box 370 andymac@bullseye.apana.org..au (play) | Belconnen ACT 2616 Fido: Andrew MacIntyre, 3:620/243.18 | Australia To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:16: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from poseidon.hamsterville.ultranet.com (poseidon.hamsterville.ultranet.com [146.115.71.116]) by hub.freebsd.org (Postfix) with ESMTP id 68F7114DF3 for ; Fri, 8 Oct 1999 22:16:05 -0700 (PDT) (envelope-from ben@hamsterville.ultranet.com) Received: from ENERGIZER (energizer.hamsterville.ultranet.com [146.115.71.106]) by poseidon.hamsterville.ultranet.com (8.9.3/8.9.0/1.0-bcg) with SMTP id BAA05302; Sat, 9 Oct 1999 01:17:17 -0400 (EDT) Message-ID: <00a901bf1215$a185d8e0$6a477392@dsg.hamsterville.ultranet.com> From: "Ben Goodwin" To: "Ruslan Ermilov" Cc: References: <025301bf1141$6ef3c880$6a477392@dsg.hamsterville.ultranet.com> <19991008092128.F54236@relay.ucb.crimea.ua> Subject: Re: 3.3R box crashing; need help debugging the crash Date: Sat, 9 Oct 1999 01:17:50 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.5600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.5600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Been there. Printed it out even The point is that I'm at the kgdb prompt, I've typed in some stuff, but I have no idea what the output means. I need help finding the bad pointer or value etc etc.. I don't know what to look for ... -=| Ben ----- Original Message ----- From: "Ruslan Ermilov" To: "Ben Goodwin" Cc: Sent: Friday, October 08, 1999 2:21 AM Subject: Re: 3.3R box crashing; need help debugging the crash > On Thu, Oct 07, 1999 at 11:58:51PM -0400, Ben Goodwin wrote: > > I have a box here that's crashing every once in a while and I'd like to > > determine why .. I don't know how to navigate/interpret kgdb well enough to > > figure out what's going on.. I'm hoping someone can help me.. I have the > > debug-compiled kernel and the files in the crash dir .. Perhaps someone > > would be kind enough to tell me what I need to paste here in email, or even > > d/l the necessary files and do the kgdb themselves? Thanks! > > > > -=| Ben > > > Please take a look at http://www.FreeBSD.org/handbook/kerneldebug.html. > > Cheers, > -- > Ruslan Ermilov Sysadmin and DBA of the > ru@ucb.crimea.ua United Commercial Bank, > ru@FreeBSD.org FreeBSD committer, > +380.652.247.647 Simferopol, Ukraine > > http://www.FreeBSD.org The Power To Serve > http://www.oracle.com Enabling The Information Age > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:21:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from poseidon.hamsterville.ultranet.com (poseidon.hamsterville.ultranet.com [146.115.71.116]) by hub.freebsd.org (Postfix) with ESMTP id 7C809150BF for ; Fri, 8 Oct 1999 22:21:51 -0700 (PDT) (envelope-from ben@hamsterville.ultranet.com) Received: from ENERGIZER (energizer.hamsterville.ultranet.com [146.115.71.106]) by poseidon.hamsterville.ultranet.com (8.9.3/8.9.0/1.0-bcg) with SMTP id BAA05406; Sat, 9 Oct 1999 01:23:05 -0400 (EDT) Message-ID: <00b101bf1216$7144fbb0$6a477392@dsg.hamsterville.ultranet.com> From: "Ben Goodwin" To: "Sheldon Hearn" Cc: References: <56908.939376716@axl.noc.iafrica.com> Subject: Re: 3.3R box crashing; need help debugging the crash Date: Sat, 9 Oct 1999 01:23:37 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.5600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.5600 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Cool, perhaps if you provide some interesting information, someone > _else_ will know how to interpret it. :-) Indeed that's what I'm looking to have done .. > First, we make some assumptions here: > > 1) When you configured your kernel, you did ``config -g'' for debugging > support. Yes. > 2) Hopefully, your crash isn't happening inside a kld. That's icky. For > this situation, try to limit the number of kld's you use. I don't think I'm using any.. I have a perty basic config going here .. > gdb -k /path/to/kernel.debug /var/crash/vmcore.0 > > Gdb should tell you about the panic. You can then issue the command > ``back'' at the GDB prompt to get a backtrace. Then cut'n'paste > everything that follows the gdb copyright notice. :-) Ok.. I've gotten to this point on my own .. so I'll cut-n-paste the results ... Thanks! ========= IdlePTD 2527232 initial pcb at 201e44 panicstr: page fault panic messages: --- Fatal trap 12: page fault while in kernel mode fault virtual address = 0xbfca0a80 fault code = supervisor read, page not present instruction pointer = 0x8:0xc01b825f stack pointer = 0x10:0xc65e1f08 frame pointer = 0x10:0xc65e1f18 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 9522 (pine) interrupt mask = net tty bio cam trap number = 12 panic: page fault syncing disks... 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 giv ing up dumping to dev 20003, offset 4096 dump 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 8 5 84 83 82 81 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 --- #0 boot (howto=256) at ../../kern/kern_shutdown.c:285 285 dumppcb.pcb_cr3 = rcr3(); (kgdb) back #0 boot (howto=256) at ../../kern/kern_shutdown.c:285 #1 0xc012da71 in panic (fmt=0xc01e4dc2 "page fault") at ../../kern/kern_shutdown.c:446 #2 0xc01b9c7e in trap_fatal (frame=0xc65e1ecc, eva=3217689216) at ../../i386/i386/trap.c:942 #3 0xc01b9937 in trap_pfault (frame=0xc65e1ecc, usermode=0, eva=3217689216) at ../../i386/i386/trap.c:835 #4 0xc01b9596 in trap (frame={tf_es = -966918128, tf_ds = -1071972336, tf_edi = 0, tf_esi = -1066399468, tf_ebp = -966910184, tf_isp = -966910220, tf_ebx = -1066399468, tf_edx = 0, tf_ecx = -1077278080, tf_eax = 658048, tf_trapno = 12, tf_err = 0, tf_eip = -1071938977, tf_cs = 8, tf_eflags = 66050, tf_esp = -968018496, tf_ss = 0}) at ../../i386/i386/trap.c:437 #5 0xc01b825f in pmap_remove_pages (pmap=0xc64d3624, sva=0, eva=3217022976) at ../../i386/i386/pmap.c:2913 #6 0xc0127ad2 in exit1 (p=0xc64ce760, rv=0) at ../../kern/kern_exit.c:216 #7 0xc01278e4 in exit1 (p=0xc64ce760, rv=-966910060) at ../../kern/kern_exit.c:104 #8 0xc01b9ec7 in syscall (frame={tf_es = 674234407, tf_ds = -1078001625, tf_edi = 0, tf_esi = -1, tf_ebp = -1077946784, tf_isp = -966909980, tf_ebx = 674186856, tf_edx = 0, tf_ecx = 136933376, tf_eax = 1, tf_trapno = 0, tf_err = 2, tf_eip = 673931908, tf_cs = 31, tf_eflags = 582, tf_esp = -1077946804, tf_ss = 39}) ---Type to continue, or q to quit--- at ../../i386/i386/trap.c:1100 #9 0xc01af84c in Xint0x80_syscall () Cannot access memory at address 0xbfbfd660. (kgdb) ===== kernel config: machine "i386" cpu "I686_CPU" ident POSEIDON maxusers 64 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores config kernel root on wd0 controller isa0 controller pnp0 # PnP support for ISA controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts pseudo-device splash device sc0 at isa? tty device npx0 at isa? port IO_NPX irq 13 device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device al0 # ADMtek AL981 (``Comet'') device rl0 # RealTek 8129/8139 pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device pty 64 # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's pseudo-device bpfilter 1 #Berkeley packet filter options SC_HISTORY_SIZE=500 options DDB options DDB_UNATTENDED To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:30:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from lh2.rdc1.bc.home.com (ha2.rdc1.bc.wave.home.com [24.2.10.67]) by hub.freebsd.org (Postfix) with ESMTP id 194C514DCE for ; Fri, 8 Oct 1999 22:30:36 -0700 (PDT) (envelope-from whitehat@home.com) Received: from home.com ([24.113.65.122]) by lh2.rdc1.bc.home.com (InterMail v4.01.01.00 201-229-111) with ESMTP id <19991009053036.USMP9582.lh2.rdc1.bc.home.com@home.com> for ; Fri, 8 Oct 1999 22:30:36 -0700 Message-ID: <37FED0DC.2A63CF6D@home.com> Date: Fri, 08 Oct 1999 22:21:32 -0700 From: whitehat@home.com Organization: @Home Network Member X-Mailer: Mozilla 4.05 [en]C-AtHome0404 (Win95; U) MIME-Version: 1.0 To: questions@freebsd.org Subject: total lag Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Now I have yet another obstacle. For some reason, KDE is INSANELY slow, and so does every other WM i've tried. It takes 3 min for netscape to load, and the machine is grinding like crazy...its working way to hard. Will it help if I increase my Swap size? right now its 98 MB, and my RAM is 48MB (so the swap file is rougly two times my RAM, as recommended). Or, mabye increase my root partition (which is currently set at 30MB). Or, mabye its the fact that I didnt make a /proc partition...here is my current system setup (might help you) Filesystem 1K-blocks Used Avail Capacity Mount /dev/wd0s2a 29751 22932 4439 84% / /dev/wd0s2e 595383 286406 261317 52% /usr procfs 4 4 0 100% /proc Mabye I should create a /proc partition..for some reason FreeBSD automaticly made that "procfs" entry, perhaps thats whats slowing my whole system down. Any ideas? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:39:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from thoth.mch.sni.de (thoth.mch.sni.de [192.35.17.2]) by hub.freebsd.org (Postfix) with ESMTP id D023614F45 for ; Fri, 8 Oct 1999 22:39:46 -0700 (PDT) (envelope-from ust@cert.siemens.de) X-Envelope-Sender-Is: ust@cert.siemens.de (at relayer thoth.mch.sni.de) Received: from mail2.siemens.de (mail2.siemens.de [139.25.208.14]) by thoth.mch.sni.de (8.9.3/8.9.3) with ESMTP id HAA17798; Sat, 9 Oct 1999 07:39:45 +0200 (MET DST) Received: from mars.cert.siemens.de (ust.mchp.siemens.de [139.23.201.17]) by mail2.siemens.de (8.9.3/8.9.3) with ESMTP id HAA17988; Sat, 9 Oct 1999 07:39:45 +0200 (MET DST) Received: from alaska.cert.siemens.de (alaska.cert.siemens.de [139.23.202.134]) by mars.cert.siemens.de (8.9.3/8.9.3/Siemens CERT [ $Revision: 1.9 ]) with ESMTP id HAA62371; Sat, 9 Oct 1999 07:39:44 +0200 (CEST) Received: (from ust@localhost) by alaska.cert.siemens.de (8.9.3/8.9.3/alaska [ $Revision: 1.2 ]) id FAA06844; Sat, 9 Oct 1999 05:39:44 GMT (envelope-from ust) Date: Sat, 9 Oct 1999 07:39:44 +0200 From: Udo Schweigert To: Frankie Li Cc: freebsd-questions@FreeBSD.ORG Subject: Re: two harddrive with same monut point Message-ID: <19991009073944.A6829@alaska.cert.siemens.de> References: <37FE6A57.C5B99341@lvdi.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37FE6A57.C5B99341@lvdi.net> X-Operating-System: FreeBSD 3.3-STABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 03:04:07PM -0700, Frankie Li wrote: > Hi, > I am wondering if there is anyway I could have > 2 EIDE hard drive (both 4 GB) under the same > /usr file system? Many of my current setup for > a server is based on their home dir, and changing > them from /usr to something else could be a pain > in the butt... > Can you explain better what your question is. If you want two partitions (not two harddrive)s to behave as one logical partition, which you can newfs and mount, then see ccd(4) or [better] vinum(8). Regards ------------------------------------------------------------------------------- Udo Schweigert || Voice : +49 89 636 42170 Siemens AG, Siemens CERT || Fax : +49 89 636 41166 ZT IK 3 || email : Udo.Schweigert@mchp.siemens.de D-81730 Muenchen / Germany || : ust@cert.siemens.de PGP fingerprint || 2A 53 F6 A6 30 59 64 02 6B C4 E0 73 B2 C9 6C E7 ------------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:42:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dart.sr.se (dart.SR.SE [193.12.91.98]) by hub.freebsd.org (Postfix) with ESMTP id 9F2CF1586A for ; Fri, 8 Oct 1999 22:42:34 -0700 (PDT) (envelope-from gunnar@pluto.sr.se) Received: from honken.sr.se ([134.25.128.27]) by dart.sr.se (8.9.3/8.9.3) with ESMTP id HAA07284; Sat, 9 Oct 1999 07:42:30 +0200 (MET DST) Received: from pluto.sr.se (pluto.SR.SE [134.25.193.91]) by honken.sr.se (8.7.5/8.7.3) with ESMTP id HAA01327; Sat, 9 Oct 1999 07:42:30 +0200 (MET DST) Received: (from gunnar@localhost) by pluto.sr.se (8.9.3/8.9.3) id HAA11892; Sat, 9 Oct 1999 07:42:29 +0200 (CEST) (envelope-from gunnar) Date: Sat, 9 Oct 1999 07:42:29 +0200 From: Gunnar Flygt To: whitehat@home.com Cc: FreeBSD Questions Subject: Re: total lag Message-ID: <19991009074229.A11516@sr.se> Reply-To: Gunnar Flygt References: <37FED0DC.2A63CF6D@home.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37FED0DC.2A63CF6D@home.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 10:21:32PM -0700, whitehat@home.com wrote: > Now I have yet another obstacle. For some reason, KDE is INSANELY slow, > and so does every other WM i've tried. It takes 3 min for netscape to > load, and the machine is grinding like crazy...its working way to hard. > Will it help if I increase my Swap size? right now its 98 MB, and my RAM > is 48MB (so the swap file is rougly two times my RAM, as recommended). > Or, mabye increase my root partition (which is currently set at 30MB). > Or, mabye its the fact that I didnt > make a /proc partition...here is my current system setup (might help > you) > If you create a /usr/tmp and make /tmp a symlink to /usr/tmp, you'll not fill / with temporary files. > Filesystem 1K-blocks Used Avail Capacity Mount > > /dev/wd0s2a 29751 22932 4439 84% / > /dev/wd0s2e 595383 286406 261317 52% /usr > procfs 4 4 0 100% /proc > > Mabye I should create a /proc partition..for some reason FreeBSD > automaticly made that "procfs" entry, perhaps thats whats slowing my > whole system down. Any ideas? No you shouldn't create a /proc partition. But maybe you should have created a /var partition!! > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- __o regards, Gunnar ---_ \<,_ email: flygt@sr.se ---- (_)/ (_) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:54:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id AAE4C15140 for ; Fri, 8 Oct 1999 22:54:31 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11ZpoF-000II8-00 for freebsd-questions@FreeBSD.ORG; Sat, 09 Oct 1999 06:16:47 +0000 Message-ID: <37FEDCF7.59450877@hackfurby.com> Date: Sat, 09 Oct 1999 01:13:11 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: removing GCC Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Okay guys heres one for ya..... 3.3-RELEASE comes stock with gcc 2.7.2.3 yet in the ports tree there is gcc 2.9.5 ( egcs based ) and i know 4.0-RELEASE is also EGCS based how do i replace the gcc 2.7.2.3 with the newer 2.9.5 and not have it clobbered by a build world, and use it as my default compiler ?? -- Reboot America. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 22:57:50 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 35338158BE for ; Fri, 8 Oct 1999 22:57:48 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11ZprN-000IIE-00; Sat, 09 Oct 1999 06:20:01 +0000 Message-ID: <37FEDDB9.19660F6D@hackfurby.com> Date: Sat, 09 Oct 1999 01:16:26 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Gunnar Flygt Cc: whitehat@home.com, FreeBSD Questions Subject: Re: total lag References: <37FED0DC.2A63CF6D@home.com> <19991009074229.A11516@sr.se> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Gunnar Flygt wrote: > On Fri, Oct 08, 1999 at 10:21:32PM -0700, whitehat@home.com wrote: > > Now I have yet another obstacle. For some reason, KDE is INSANELY slow, > > and so does every other WM i've tried. It takes 3 min for netscape to > > load, and the machine is grinding like crazy...its working way to hard. > > Will it help if I increase my Swap size? right now its 98 MB, and my RAM > > is 48MB (so the swap file is rougly two times my RAM, as recommended). > > Or, mabye increase my root partition (which is currently set at 30MB). > > Or, mabye its the fact that I didnt > > make a /proc partition...here is my current system setup (might help > > you) Ummm how much memory is on the video card ???? and my box is slow with 32 megs but not that slow... and i use enlightenment development dr 16.4 under 3.3 with a 4 meg video card, also does FreeBSD see all the memory ??? Reboot America. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Fri Oct 8 23:48:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 68E8915283 for ; Fri, 8 Oct 1999 23:48:11 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 5170 invoked from network); 9 Oct 1999 06:48:09 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.110.107) by cask.force9.net with SMTP; 9 Oct 1999 06:48:09 -0000 Message-ID: <37FEE55F.E38B87B8@sinclairassoc.force9.co.uk> Date: Sat, 09 Oct 1999 07:49:03 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: whitehat@home.com Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: bad resolution References: <37FE5446.6353C34B@home.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG whitehat@home.com wrote: > > Ok..I got X up and running, but there's one small thing wrong. I told > it to go 640x480 (my win95/linux resolution) but for some reason X only > goes to the top right of my screen, and everytime it starts my monitor > identifies it as a "new video", which did not happen with Xfree86 in > Linux. I tried the xvidtune program, but it looked a little scary. > Another reason might be that I defined my monitor vertical sync rate > 50-120, and my horizontal sync rate as 30-85. Should I just use a > number in between those? Like instead of 50-120 should I use 90? > > I also suffer failure at the hands of KDE. I have a suspicion that the > packages for KDE are scattered among the other 3 CD's...because when I > begin to install KDE (from the second Cd) it begins to install, but > stops after it cannot find a package on the CD. Whats going on? The > error is like this "Unable to fetch package kdelib from selected media. > No package add will be done." > > Help > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Are you using the gui or the text-based version for setting up Xfree86? I had many problems using the gui version with a more or less single mode 640x400 VGA monitor, but had very good results with the text-based version. First thing is to have your monitor specs to hand. You must get them *exactly* right or you could find yourself driving your monitor beyond its intended range - and paying for the resultant damage. If you know the vert refresh rate of your monitor at the screen resolution you intend to use, specify this as a single value if you can. If you use the text-based interface it will generate a much larger XF86Config file than via the gui interface. It will create lots of modeline statements in the MONITOR section, many of which will be redundant - but you can leave them in because X will reject invalid ones when it starts up. Further down the file you can check the values for your DEVICE (card) and bring the whole thing together in the SCREEN section. I do recommend going through this file by hand if you are having problems. Remember - please don't make up any numbers, get the right ones first. And don't worry about xvidtune. Get your display working first and only use xvidtune if you need to tweak it. xvidtune won't cure a broken Config file. Finally, I'm not sure what you mean by "X only goes to the top right of the screen". Do you mean that the raster is at the top right (surely not) or that the raster fills the screen but my image is only at the top right? Are you using the basic twm? Check the contents of .xinitrc in your home directory. If it has something like exec startkde then it configured OK for kde; if it has something like twm & \ xterm -geometry etc,etc it is configured for simple X-windows and you will need to change it. If you mean that you get an X-window only at the top right, it looks like it's configured for twm with the position of your terminal window being dictated by the geometry settings in .xinitrc. As to the "Unable to fetch package kdelib..." message, I had this in 3.2-RELEASE, but kde worked just fine. If it still doesn't work then someone else will need to help you over this hurdle - I don't know the answer. Hope you get it working OK. Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0: 1:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.easystreet.com (easystreet.com [206.26.36.40]) by hub.freebsd.org (Postfix) with ESMTP id 7797614DFA for ; Sat, 9 Oct 1999 00:01:49 -0700 (PDT) (envelope-from tashchuk@easystreet.com) Received: from easystreet.com (dsl-209-162-218-66.easystreet.com [209.162.218.66]) by mail.easystreet.com (8.9.1/8.9.1) with ESMTP id AAA12963; Sat, 9 Oct 1999 00:01:06 -0700 (PDT) Message-ID: <37FEE832.EECB0B8C@easystreet.com> Date: Sat, 09 Oct 1999 00:01:06 -0700 From: Bohdan Tashchuk X-Mailer: Mozilla 4.61 [en] (X11; I; BSD/OS 4.0.1 i386) X-Accept-Language: en MIME-Version: 1.0 To: Bill Cc: Ruslan Ermilov , Edirol , freebsd-questions@FreeBSD.ORG Subject: Re: natd - ping crash References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have just confirmed this panic from a non-FreeBSD unix machine with a target of my FreeBSD machine running 3.3 release with natd (same Ethernet segment). From a non-FreeBSD Unix machine, as root, I did ping -f -R Instant causes panic (takes less than 1 second elapsed time) on FreeBSD machine: Fatal trap 12: page fault while in kernel mode I looked, and has already been reported as bug kern/11199. It really is a "panic", rather than a "simply reboot". The difference is that the kernel says it's syncing disks, etc. Then the kernel says automatic reboot in 15 seconds So, unless you're right at the console and watching, the FreeBSD machine doesn't have any "sign of panic". But it really did panic. It just rebooted almost immediately and the panic message scrolled off the screen. Needless to say, I immediately tried the suggested fix and added the following IPFW rule: $fwcmd add deny log ip from any to any ipoptions rr This fixed the problem. I let ping -f run for a few minutes and there was no panic even after 26,000 pings. Bill wrote: > > This is a very serious bug/security issue with natd, ping -r will simply > reboot freebsd if your running natd , ive seen no sign of pannic. > A friend of mine discovered this in 2.6 release & it has since carried > over. Since I have been aware of it ive used IPFW deny ipopt rr since this > can be done over any networks to any fbsd machine using natd. > > On Fri, 8 Oct 1999, Ruslan Ermilov wrote: > > > On Fri, Oct 08, 1999 at 12:14:27AM -0400, Edirol wrote: > > > Hi, > > > > > > I'm running natd on a 3.3R system with the following command line > > > options -s -m -u > > > > > > When I ping -R my box from another computer, after a while the system > > > reboots itself. > > > > > Reboots or panics? > > > > -- > > Ruslan Ermilov Sysadmin and DBA of the > > ru@ucb.crimea.ua United Commercial Bank, > > ru@FreeBSD.org FreeBSD committer, > > +380.652.247.647 Simferopol, Ukraine To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0: 6: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id E63D114DFA for ; Sat, 9 Oct 1999 00:04:35 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 17389 invoked from network); 9 Oct 1999 06:06:23 -0000 Received: from unknown (HELO tim) (192.168.1.3) by cache.ima-info.ro with SMTP; 9 Oct 1999 06:06:23 -0000 From: "Ion Mihai Tetcu" To: Brett Taylor , questions@FreeBSD.ORG Date: Sat, 9 Oct 1999 09:58:59 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD-Server, Win98-Client Reply-To: itetcu@go.ro Cc: questions@FreeBSD.ORG References: <199910062313.TAA06589@peloton.runet.edu> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991009070451.E63D114DFA@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks, Ionut In 7 Oct 99, la 10:06, Brett Taylor a scris: > Hi, > > On Thu, 7 Oct 1999, Ion Mihai Tetcu wrote: > > > In 5 Oct 99, la 13:31, Brett Taylor a scris: > > > > In terms of other HTML editors there are a number out there - you can > > > try asWedit (in ports - www/aswedit), ashe (also in ports), Coffee > > > (not in the ports at present) and lots of others. Of course vi always > > > works. :-) > > > Thanks for the info`s. What do you prefer? > > I use asWedit fairly frequently - it's got nice color context coding and > it works pretty well. > > I've tried Coffee and it's okay as well, although it doesn't have color > context coding and doesn't seem set up as well out of the box (it may have > color coding, but I haven't figured out how to turn it on yet). If you > already use Emacs, it has an HTML mode as well. > > > Is it worthing to wait for the 4.0 (for the network) or should i start > > installing the 3.3 ? > > I'd install 3.3 - 4.0 won't be out for awhile yet and 3.3 is plenty > stable. > > Brett > ***************************************************** > Dr. Brett Taylor brett@peloton.runet.edu * > Dept of Chem and Physics * > Curie 39A (540) 831-6147 * > Dept. of Mathematics and Statistics * > Walker 234 (540) 831-5410 * > ***************************************************** > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0: 6:12 1999 Delivered-To: freebsd-questions@freebsd.org Received: from relay2.ima-info.ro (cache.ima-info.ro [193.231.230.4]) by hub.freebsd.org (Postfix) with SMTP id 31798158FD for ; Sat, 9 Oct 1999 00:04:35 -0700 (PDT) (envelope-from itetcu@go.ro) Received: (qmail 17389 invoked from network); 9 Oct 1999 06:06:23 -0000 Received: from unknown (HELO tim) (192.168.1.3) by cache.ima-info.ro with SMTP; 9 Oct 1999 06:06:23 -0000 From: "Ion Mihai Tetcu" To: Brett Taylor , questions@FreeBSD.ORG Date: Sat, 9 Oct 1999 09:58:59 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: FreeBSD-Server, Win98-Client Reply-To: itetcu@go.ro Cc: questions@FreeBSD.ORG References: <199910062313.TAA06589@peloton.runet.edu> In-reply-to: X-mailer: Pegasus Mail for Win32 (v3.01d) Message-Id: <19991009070508.31798158FD@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thanks, Ionut In 7 Oct 99, la 10:06, Brett Taylor a scris: > Hi, > > On Thu, 7 Oct 1999, Ion Mihai Tetcu wrote: > > > In 5 Oct 99, la 13:31, Brett Taylor a scris: > > > > In terms of other HTML editors there are a number out there - you can > > > try asWedit (in ports - www/aswedit), ashe (also in ports), Coffee > > > (not in the ports at present) and lots of others. Of course vi always > > > works. :-) > > > Thanks for the info`s. What do you prefer? > > I use asWedit fairly frequently - it's got nice color context coding and > it works pretty well. > > I've tried Coffee and it's okay as well, although it doesn't have color > context coding and doesn't seem set up as well out of the box (it may have > color coding, but I haven't figured out how to turn it on yet). If you > already use Emacs, it has an HTML mode as well. > > > Is it worthing to wait for the 4.0 (for the network) or should i start > > installing the 3.3 ? > > I'd install 3.3 - 4.0 won't be out for awhile yet and 3.3 is plenty > stable. > > Brett > ***************************************************** > Dr. Brett Taylor brett@peloton.runet.edu * > Dept of Chem and Physics * > Curie 39A (540) 831-6147 * > Dept. of Mathematics and Statistics * > Walker 234 (540) 831-5410 * > ***************************************************** > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Ion Mihai Tetcu itetcu@go.ro ------------------------------------------------------------------------------- Get a free e-mail and 10M webspace at http://www.home.ro/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0:30:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-93.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.93]) by hub.freebsd.org (Postfix) with ESMTP id F02BC15066 for ; Sat, 9 Oct 1999 00:30:10 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id IAA00322; Sat, 9 Oct 1999 08:30:10 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id CAA03071; Sat, 9 Oct 1999 02:36:41 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910090136.CAA03071@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: Mark Ovens Cc: J McKitrick , freebsd-questions@FreeBSD.ORG Subject: Re: how do i get modem connection speed from ppp? In-reply-to: Your message of "Thu, 07 Oct 1999 21:02:26 BST." <19991007210226.B817@marder-1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 09 Oct 1999 02:36:41 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > On Thu, Oct 07, 1999 at 08:33:24PM +0100, Mark Ovens wrote: > > On Thu, Oct 07, 1999 at 12:35:41PM +0100, J McKitrick wrote: > > > Which of the stats used with the 'show' command will let me see the speed > > > of the current ppp connection? > > > > > > > ``show modem'' > > > > Seems this is actually dependent on which version of FreeBSD you're > running. ``show modem'' was (is) valid in 3.1, but in 3.3-STABLE > it isn't, you need ``show physical''. I do wish Brian would stop > changing things ;-) [.....] Sorry 'bout that. But since I abstracted all the devices, the link isn't necessarily a modem any more :-/ Disclaimer: Hey, at least I remembered to mention it in README.changes ! -- Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0:30:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from awfulhak.org (dynamic-93.max1-du-ws.dialnetwork.pavilion.co.uk [212.74.8.93]) by hub.freebsd.org (Postfix) with ESMTP id 191F8153DC for ; Sat, 9 Oct 1999 00:30:10 -0700 (PDT) (envelope-from brian@Awfulhak.org) Received: from hak.lan.Awfulhak.org (root@hak.lan.Awfulhak.org [172.16.0.12]) by awfulhak.org (8.9.3/8.9.3) with ESMTP id IAA00317; Sat, 9 Oct 1999 08:30:05 +0100 (BST) (envelope-from brian@lan.awfulhak.org) Received: from hak.lan.Awfulhak.org (brian@localhost.lan.Awfulhak.org [127.0.0.1]) by hak.lan.Awfulhak.org (8.9.3/8.9.3) with ESMTP id CAA03055; Sat, 9 Oct 1999 02:33:28 +0100 (BST) (envelope-from brian@hak.lan.Awfulhak.org) Message-Id: <199910090133.CAA03055@hak.lan.Awfulhak.org> X-Mailer: exmh version 2.0.2 2/24/98 To: agifford@infowest.com Cc: questions@FreeBSD.ORG Subject: Re: ppp across ssh (vpn) In-reply-to: Your message of "Wed, 06 Oct 1999 23:23:49 MDT." <19991007052349.57D6D20FB8@infowest.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Date: Sat, 09 Oct 1999 02:33:28 +0100 From: Brian Somers Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > Hello, > = > = > I was playing around trying to establish a VPN connection by > using userland ppp across SSH. I believe I have everything > set up the way the ppp.conf.sample and man page described. > It almost works. I can watch the log files on both sides > of the tunnel. The client works as expected. However, on > the server side, I keep getting "tun0: Phase: Exception detected > on descriptor 0" and looking at the PPP code, it would seem > that ssh is for some reason sending out-of-band data (since > the select() man page explains that the only reason for an > exception on a file descriptor is for OOB data). When ppp is using a program as a link, and exception generally means = that the program has exited. > Looking at my ppp.startvpn.sh script: > = > #!/bin/sh > exec ssh -a -c blowfish -e none -l sshvpnuser -q -x vpn.server.host /= usr/sbin/ppp -direct vpnserver > = > When I add a "-t" to force ssh to allocate a pty and run the > script by hand from the command line, sure enough, I see: > = > # ./ppp.startvpn.sh > ~=FF}#=C0!}!}!} $}(}"}'}"}"}&} } } } }!}$}%=DC}%}&&=E1=9B=DF}$}(=C0%} = } > > = > BUT when I do NOT allocate a pty OR I run the script via PPP > on my client machine, nothing happens and I see the exception > previously mentioned on the server side. > = > I am assuming that there is some terminal-related traffic, > perhaps, that SSH is doing with OOB data that's causing the > exception, but is maybe handled when there's a pty allocated? > Please, I'm grasping at straws here, playing with stuff I know > nothing about. > = > Any ideas? Suggestions? Upgrade to the latest ppp (http://www.Awfulhak.org/ppp.html). Old = versions abend when they see descriptor exceptions. > Thanks! > = > Aaron out. -- = Brian Don't _EVER_ lose your sense of humour ! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0:40:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hercules.crossthread.com (hercules.crossthread.com [139.142.137.200]) by hub.freebsd.org (Postfix) with ESMTP id 853EC1590F for ; Sat, 9 Oct 1999 00:40:13 -0700 (PDT) (envelope-from timp@crossthread.com) Received: from dedalus (24.66.196.249.ab.wave.home.com [24.66.196.249]) by hercules.crossthread.com (8.9.3/8.9.3) with SMTP id BAA78737 for ; Sat, 9 Oct 1999 01:40:11 -0600 (MDT) From: "Tim Pushor" To: Subject: Weird pppd/proxyarp/ipnat behaviour Date: Sat, 9 Oct 1999 01:38:11 -0600 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, I am running an OpenBSD 2.5/i386 system that is acting as a NAT translator to the world via a cable modem. I have two ethernet interfaces. Internally I have a 192.168.1.0/24 network, and NAT from the LAN works as expected. I put a modem on the system and configured mgetty+pppd for dialin. I am using proxy arp to make it appear that the dialed in user is local to that LAN segment. Locally this works properly. The weird thing is that I cannot successfully ping hosts on the Internet from the machine I am dialed in on! tcp/udp seems to work properly though. I can ping hosts on the Internet from machines on the LAN segment. I'm not sure where to begin troubleshooting this problem. Any ideas? Thanks, Tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0:41:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hercules.crossthread.com (hercules.crossthread.com [139.142.137.200]) by hub.freebsd.org (Postfix) with ESMTP id 03CD915912 for ; Sat, 9 Oct 1999 00:41:15 -0700 (PDT) (envelope-from timp@crossthread.com) Received: from dedalus (24.66.196.249.ab.wave.home.com [24.66.196.249]) by hercules.crossthread.com (8.9.3/8.9.3) with SMTP id BAA78742 for ; Sat, 9 Oct 1999 01:41:15 -0600 (MDT) From: "Tim Pushor" To: Subject: FW: Weird pppd/proxyarp/ipnat behaviour Date: Sat, 9 Oct 1999 01:39:14 -0600 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG DUH Wrong list. Sorry. -----Original Message----- From: Tim Pushor [mailto:timp@crossthread.com] Sent: Saturday, October 09, 1999 1:38 AM To: questions@freebsd.org Subject: Weird pppd/proxyarp/ipnat behaviour Hello, I am running an OpenBSD 2.5/i386 system that is acting as a NAT translator to the world via a cable modem. I have two ethernet interfaces. Internally I have a 192.168.1.0/24 network, and NAT from the LAN works as expected. I put a modem on the system and configured mgetty+pppd for dialin. I am using proxy arp to make it appear that the dialed in user is local to that LAN segment. Locally this works properly. The weird thing is that I cannot successfully ping hosts on the Internet from the machine I am dialed in on! tcp/udp seems to work properly though. I can ping hosts on the Internet from machines on the LAN segment. I'm not sure where to begin troubleshooting this problem. Any ideas? Thanks, Tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 0:53: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from moon.mteege.de (ppps-nb03.MVnet.de [194.25.108.153]) by hub.freebsd.org (Postfix) with ESMTP id 5292914D83 for ; Sat, 9 Oct 1999 00:53:05 -0700 (PDT) (envelope-from matthias@mteege.de) Received: (from matthias@localhost) by moon.mteege.de (8.8.8/8.8.8) id JAA07066; Sat, 9 Oct 1999 09:06:13 +0200 (MET DST) (envelope-from matthias) Date: Sat, 9 Oct 1999 09:06:13 +0200 From: Matthias Teege To: gamut@primenet.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Printer Drivers? Message-ID: <19991009090613.A7038@moon.mteege.de> References: <199910082036.NAA06499@smtp02.primenet.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <199910082036.NAA06499@smtp02.primenet.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 08, 1999 at 01:36:11PM -0700, gamut@primenet.com wrote: > Greetings! > I'm just about to buy a laser printer and have more or less > settled on the NEC Superscript 870. Where would I look to see if there > is an existing driver for this printer? > Thanks very much for your help, > your pal, > Pedro Moin, take one with Postscript Support. Matthias -- Matthias Teege -- matthias@mteege.de -- http://emugs.de make world not war PGP-Key auf Anfrage To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 1:23:42 1999 Delivered-To: freebsd-questions@freebsd.org Received: from studentmail.liu.se (student.liu.se [130.236.230.10]) by hub.freebsd.org (Postfix) with ESMTP id 478D214BC2 for ; Sat, 9 Oct 1999 01:23:38 -0700 (PDT) (envelope-from johpe159@student.liu.se) Received: from student.liu.se (b152.ryd.student.liu.se [130.236.233.152]) by studentmail.liu.se (Postfix) with ESMTP id 1C7FF5DE51 for ; Sat, 9 Oct 1999 10:23:37 +0200 (MET DST) Message-ID: <37FEFBC1.4F5FAE24@student.liu.se> Date: Sat, 09 Oct 1999 10:24:33 +0200 From: Johan Pettersson X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.3-19990909-RC i386) X-Accept-Language: sv, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: rm Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! -rwsr-sr-x 1 johpe wheel 0 Oct 8 16:26 ?O?????e??>????SF>x?:?;???????u???oPK????yw.?X; Sat, 9 Oct 1999 02:04:37 -0700 (PDT) (envelope-from dr@domix.de) Received: from lamest.domix.de (dial5-117.netcologne.de [194.8.195.117]) by mail2.netcologne.de (8.9.3/8.9.3) with ESMTP id LAA07608; Sat, 9 Oct 1999 11:04:31 +0200 (MET DST) Received: from domix.de (speed.localnet.lan [192.168.1.2]) by lamest.domix.de (8.9.3/8.9.3) with ESMTP id KAA01957; Sat, 9 Oct 1999 10:56:02 +0200 (CEST) (envelope-from dr@domix.de) Received: (from dr@localhost) by domix.de (8.9.3/8.9.3) id LAA68261; Sat, 9 Oct 1999 11:02:45 +0200 (CEST) (envelope-from dr) Date: Sat, 9 Oct 1999 11:02:45 +0200 From: Dominik Rothert To: Johan Pettersson Cc: freebsd-questions@freebsd.org Subject: Re: rm Message-ID: <19991009110245.A68199@speed.localnet.lan> References: <37FEFBC1.4F5FAE24@student.liu.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <37FEFBC1.4F5FAE24@student.liu.se> X-Encryption: PGP/GnuPG key available X-URL: http://www.domix.de X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Johan Pettersson wrote: > -rwsr-sr-x 1 johpe wheel 0 Oct 8 16:26 > ?O?????e??>????SF>x?:?;???????u???oPK????yw.?X drwxr-xr-x 2 johpe wheel 512 Oct 8 16:26 ??^??%??????"?? > How do I rm this ? If you're using bash, simply type '?' and use to complete the filenames. You could also try to qoute it; both works here. Best wishes, Dominik Rothert. -- /* Dominik Rothert | Cologne BSD-Usergroup | Dr. LANG Internet Consulting * * dr@domix.de | dr@cbug.de | dr@lang-consulting.de * * www.domix.de | www.cbug.de | www.lang-consulting.de */ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 3:41:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp2.ihug.co.nz (tk2.ihug.co.nz [203.29.160.14]) by hub.freebsd.org (Postfix) with ESMTP id 661F114DAD for ; Sat, 9 Oct 1999 03:41:17 -0700 (PDT) (envelope-from wheely@ihug.co.nz) Received: from nicole (p17-max11.wlg.ihug.co.nz [209.78.48.17]) by smtp2.ihug.co.nz (8.9.3/8.9.3/Debian/GNU) with SMTP id XAA29679 for ; Sat, 9 Oct 1999 23:41:14 +1300 From: "wheely" To: "FreeBSD Questions Mailing List" Subject: Bootstrap/Label problems Date: Sat, 9 Oct 1999 23:40:11 +1300 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I have freshly installed 3.3-RELEASE on wd0 from FTP (and moved 2.2.8-STABLE to wd1). I choose to install Boot Manager while in sysinstall so until I am happy with 3.3, I can boot 2.2.8. When I try to boot the system, I now get "Disk Error 0x1" and then it trys to boot the kernel, resulting in "System Halted" after a few debugging symbols have printed on the console. I partitioned wd0 in compatability mode. To confirm this I booted 2.2.8 (which works fine fortunately) and got the following output: disklabel -r wd0 # /dev/rwd0c: type: ESDI disk: wd0s1 label: flags: bytes/sector: 512 sectors/track: 63 tracks/cylinder: 128 sectors/cylinder: 8064 cylinders: 780 sectors/unit: 6297921 rpm: 3600 interleave: 1 trackskew: 0 cylinderskew: 0 headswitch: 0 # milliseconds track-to-track seek: 0 # milliseconds drivedata: 0 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 102400 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 12*) b: 262144 102400 swap # (Cyl. 12*- 45*) c: 6297921 0 unused 0 0 # (Cyl. 0 - 780*) e: 163840 364544 4.2BSD 1024 8192 16 # (Cyl. 45*- 65*) f: 1228800 528384 4.2BSD 1024 8192 16 # (Cyl. 65*- 217*) g: 4540737 1757184 4.2BSD 1024 8192 16 # (Cyl. 217*- 780*) The above looks ok to me. Next i checked to see if I had an active partition fdisk wd0 ******* Working on device /dev/rwd0 ******* parameters extracted from in-core disklabel are: cylinders=781 heads=128 sectors/track=63 (8064 blks/cyl) parameters to be used for BIOS calculations are: cylinders=781 heads=128 sectors/track=63 (8064 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165,(FreeBSD/NetBSD/386BSD) start 63, size 6297921 (3075 Meg), flag 0 beg: cyl 0/ sector 1/ head 1; end: cyl 780/ sector 63/ head 127 The data for partition 2 is: The data for partition 3 is: The data for partition 4 is: Ok, so I don't have an active partition, so I set partition 1 to be active using fdisk and rebooted, still no go. (When I went back into 2.2.8 I found the partition was no longer active!) Ok, so now I tryed doing the same using the 3.3 floppies, that didn't work either - again it had reset itself Incidently the above fdisk output was radically different using the floppies. disklabel only showed one "C" partition. As a last resort I tryed to "disklabel -r wd0" in the fixit shell. I got "bad pack magic number". I tryed the same from 2.2.8, no problem (except that the 2.2.8 bootstrap is different to 3.3 ofcourse so it falls over in bootup). "disklabel -r -w wd0 auto" doesn't work either. I can mount the wd0 drives ok in 2.2.8, however I get "Invalid Format" if I try and boot the 3.3 kernel from the 2.2.8 disk. Anyone got some ideas on how to fix this? I am running out of things to try. Thanks in advance wheely To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 4:16:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from zed.ludd.luth.se (zed.ludd.luth.se [130.240.16.33]) by hub.freebsd.org (Postfix) with ESMTP id 762AE1598C for ; Sat, 9 Oct 1999 04:15:22 -0700 (PDT) (envelope-from pb@ludd.luth.se) Received: from father.ludd.luth.se (pb@father.ludd.luth.se [130.240.16.18]) by zed.ludd.luth.se (8.8.5/8.8.5) with ESMTP id MAA23325 for ; Sat, 9 Oct 1999 12:15:20 +0100 From: Peter Brevik Received: (pb@localhost) by father.ludd.luth.se (8.6.11/8.6.11) id NAA24503 for freebsd-questions@freebsd.org; Sat, 9 Oct 1999 13:15:19 +0200 Message-Id: <199910091115.NAA24503@father.ludd.luth.se> Subject: SCSI failure To: freebsd-questions@freebsd.org Date: Sat, 9 Oct 1999 13:15:19 +0200 (MET DST) X-Mailer: ELM [version 2.4ME+ PL15 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Does anyone know what this means (except that something did go wrong.. :-): Oct 9 13:05:37 wave /kernel: ncr0:1: ERROR (0:0) (43-67-0) (8/13) @ (464:0b000001). Oct 9 13:05:37 wave /kernel: script cmd = 6a5e0000 Oct 9 13:05:37 wave /kernel: reg: ca 10 80 13 47 08 01 1f 80 43 81 67 80 01 0f 00. Oct 9 13:05:37 wave /kernel: ncr0: have to clear fifos. Oct 9 13:05:37 wave /kernel: ncr0: restart (fatal error). Oct 9 13:05:37 wave /kernel: sd0(ncr0:1:0): 10.0 MB/s (100 ns, offset 8) Useful info: Oct 9 13:07:21 wave /kernel: ncr0 rev 2 int a irq 10 on pci0:20 Oct 9 13:07:21 wave /kernel: ncr0 waiting for scsi devices to settle Oct 9 13:07:21 wave /kernel: (ncr0:1:0): "QUANTUM FIREBALL1080S 1Q04" type 0 fixed SCSI 2 Oct 9 13:07:21 wave /kernel: sd0(ncr0:1:0): Direct-Access Oct 9 13:07:21 wave /kernel: sd0(ncr0:1:0): 10.0 MB/s (100 ns, offset 8) Oct 9 13:07:21 wave /kernel: 1042MB (2134305 512 byte sectors) /Peter To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 4:32:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from pop06.iname.net (pop06.iname.net [165.251.8.76]) by hub.freebsd.org (Postfix) with ESMTP id 7C30F159FE for ; Sat, 9 Oct 1999 04:31:00 -0700 (PDT) (envelope-from rmardo@lycosmail.com) Received: from ghost ([195.229.53.18]) by pop06.iname.net (8.9.3/8.9.3) with SMTP id HAA00292 for ; Sat, 9 Oct 1999 07:30:58 -0400 (EDT) Message-ID: <000901bf1249$d48790b0$45010080@oht.com> From: "Rino Mardo" To: Subject: Xircom pcmcia Date: Sat, 9 Oct 1999 15:30:49 +0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0006_01BF126B.43F789C0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0006_01BF126B.43F789C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi. I wanted to try out FreeBSD but on your site my PCMCIA card is not = among the list of supported cards. Could it be that it is supported = now? My pcmcia card is a Xircom 10/100+56K (CEM56). Thanks. ------=_NextPart_000_0006_01BF126B.43F789C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi.  I wanted to try out FreeBSD = but on your=20 site my PCMCIA card is not among the list of supported cards.  = Could it be=20 that it is supported now?
 
My pcmcia card is a Xircom 10/100+56K=20 (CEM56).
 
Thanks.
------=_NextPart_000_0006_01BF126B.43F789C0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 5:16: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from weeble.dyndns.org (ubppp233-190.dialin.buffalo.edu [128.205.233.190]) by hub.freebsd.org (Postfix) with ESMTP id 0A92D14EE4 for ; Sat, 9 Oct 1999 05:15:47 -0700 (PDT) (envelope-from cjm2@earthling.net) Received: from shithead (shithead.weeble.dyndns.org [10.0.0.2]) by weeble.dyndns.org (8.9.3/8.9.3) with SMTP id IAA08534 for ; Sat, 9 Oct 1999 08:15:39 -0400 (EDT) (envelope-from cjm2@earthling.net) Message-ID: <002601bf1250$0b9597e0$0200000a@weeble.dyndns.org> From: "C J Michaels" To: "FreeBSD Questions" Subject: Submitting new ports to the ports tree. Date: Sat, 9 Oct 1999 08:15:48 -0400 Organization: WCC MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I know there is a good amount of work involved in this process, just from the sheer volume of work that is needed, but I was wondering if anyone knew the avg turn around time for a new port submission to be committed? Also, I have noticed that at any one time there are 150 - 200 unassigned, open "problems" listed for ports, a good number of which are just new or update ports submissions. Is there anything else that someone like myself could do to assist with all that work? -Chris To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 5:46:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from caligula.anu.edu.au (caligula.anu.edu.au [150.203.224.42]) by hub.freebsd.org (Postfix) with ESMTP id 9678414EE3 for ; Sat, 9 Oct 1999 05:46:34 -0700 (PDT) (envelope-from rob@coombs.anu.edu.au) Received: from localhost (rob@localhost) by caligula.anu.edu.au (8.9.3/8.9.1) with ESMTP id WAA29260; Sat, 9 Oct 1999 22:47:21 +1000 (EST) X-Authentication-Warning: caligula.anu.edu.au: rob owned process doing -bs Date: Sat, 9 Oct 1999 22:47:20 +1000 (EST) From: Rob Hurle X-Sender: rob@caligula.anu.edu.au To: Johan Pettersson Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: rm In-Reply-To: <37FEFBC1.4F5FAE24@student.liu.se> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > -rwsr-sr-x 1 johpe wheel 0 Oct 8 16:26 > ?O?????e??>????SF>x?:?;???????u???oPK????yw.?X drwxr-xr-x 2 johpe wheel 512 Oct 8 16:26 ??^??%??????"?? > > How do I rm this ? Wah! Try: rm -di * .??* This will ask you which to remove - say "yes" at the right spot, and you're OK. Cheers, Rob Hurle ---------------------------------------------------------- Rob Hurle rob@coombs.anu.edu.au Connect-A Tel: +61 2 6247 2397 PO Box 13 Fax: +61 2 6248 8905 Ainslie ACT 2602 Mobile: 0417 293 603 Australia ---------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 6:25:15 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.safepages.com (smtp.safepages.com [192.41.32.27]) by hub.freebsd.org (Postfix) with ESMTP id 7605C14ED7 for ; Sat, 9 Oct 1999 06:25:12 -0700 (PDT) (envelope-from jason@welsh.dynip.com) Received: from welsh.dynip.com (03-123.038.popsite.net [209.198.10.123]) by smtp.safepages.com (8.8.5) id HAA04693; Sat, 9 Oct 1999 07:25:11 -0600 (MDT) X-Authentication-Warning: smtp.safepages.com: Host 03-123.038.popsite.net [209.198.10.123] claimed to be welsh.dynip.com Received: (qmail 17287 invoked by uid 1000); 9 Oct 1999 13:24:36 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 13:24:36 -0000 Date: Sat, 9 Oct 1999 09:24:36 -0400 (EDT) From: jason To: cjclark@home.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: hiding directories on ftp server In-Reply-To: <199910090324.XAA22744@cc942873-a.ewndsr1.nj.home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG ok, i did that , chmod /home/ftp/pub/leech (leech is the dir I want to hide) and when i ftp in with my cruddy dos ftp client (winblows 98) and do a ls in the pub dir, i can see it.. -rw-rw---- 1 root jason 3773144 May 26 02:26 Toto - Hold The Line.mp3 -rw-rw---- 1 root jason 2751762 Nov 11 1998 Warrant - Cherry Pie.mp3 -rw-rw---- 1 root jason 2648456 Jul 10 18:36 [Grass Roots, The] Let's Live For Today.mp3 dr-xr-x--x 2 root jason 512 Oct 9 01:33 leech <--**** -rw-rw---- 1 root jason 2651661 Jan 11 1999 men_without_hats_-_safetydance.mp3 any ideas? -- ======================================================================= | Jason Welsh jason@welsh.dynip.com | If you think there's | | | good in everybody, you | | http://welsh.dynip.com/ | haven't met everybody. | ======================================================================= On Fri, 8 Oct 1999, Crist J. Clark wrote: > jason wrote, > > can this be done with the default ftp server for FreeBSD 3.2 ?? > > what i want to do is have a directory under pub that users cannot see > > but can cd into and download stuff if i tell them the exact filename.. > > also, so that they cant see the directory or whats in it.. > > or would i need some other ftp daemon? > > Really has nothing to do with ftpd. > > On a directory, 'read' permission allows someone to 'ls' the > directory. 'Execute' permission alows people to get at files in the > directory. Just give it execute permission, e.g. 551, to the users and > they need a full pathname (or an intense dictionary atack) to get a a > file. > -- > Crist J. Clark cjclark@home.com > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 7:18:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web106.yahoomail.com (web106.yahoomail.com [205.180.60.73]) by hub.freebsd.org (Postfix) with SMTP id BEB9014BD2 for ; Sat, 9 Oct 1999 07:18:37 -0700 (PDT) (envelope-from osiris2002@yahoo.com) Message-ID: <19991009142059.23869.rocketmail@web106.yahoomail.com> Received: from [168.187.18.228] by web106.yahoomail.com; Sat, 09 Oct 1999 07:20:59 PDT Date: Sat, 9 Oct 1999 07:20:59 -0700 (PDT) From: Joss Roots Subject: SOMEONE AUTHORITATIVE PLEASE ANSWER THIS FreeBSD Question To: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hi there, I have been using FreeBSD since 2.2.6 and now I am running FreeBSD-Current as of few months, and I am having no problems really, but I have a constant observation, see I'am getting really slow internet connection, although using the same hardware, and net account and everything else, except for the operating system, on windows 98, the connection is much faster. Since I already have great trust and admiration for the FreeBSD project, I can assume there must be something wrong with my system configuration. I am running kppp for dialup (from the KDE project), and using pppd (Kernel), I get real slow downloads. So, anyone can give me some authoritative answer for this problem, where to look, what to change and test, or how to get the connection and downloads to be faster, please give me a hint. Thanks in advance. ===== MAY THE FORCE BE WITH YOU. __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 7:46:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from merlins.force9.net (merlins.force9.net [195.166.128.23]) by hub.freebsd.org (Postfix) with SMTP id B04A914D3F for ; Sat, 9 Oct 1999 07:46:27 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 5127 invoked from network); 9 Oct 1999 14:46:26 -0000 Received: from mayfly.plus.net.uk (HELO mayfly.force9.net) (195.166.128.28) by merlins.force9.net with SMTP; 9 Oct 1999 14:46:26 -0000 Received: (qmail 4476 invoked from network); 9 Oct 1999 14:46:25 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.122.89) by mayfly.plus.net.uk with SMTP; 9 Oct 1999 14:46:25 -0000 Message-ID: <37FF55A3.C3DBDB22@sinclairassoc.force9.co.uk> Date: Sat, 09 Oct 1999 15:48:03 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: FreeBSD Server and Windows Clients Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have been trying over the past month to set up the FreeBSD box to provide networking facilities to a number of PCs running Windows 95/98. I have lots of 'bits' working but have yet to achieve a fully usable system. The aims are modest: * Set up a unix server to drive the local Windows network, allow file transfers, print sharing, etc, possibly even backups if I can find a suitable application. * Provide a intranet to provide a local test-bed for clients' web pages, run cgi scripts, etc, without having to upload to the ISP to do this. * Gateway to the Internet for the unix and win boxes. I have about 80% of each aspect working OK but am running into problems. I configure one bit, but this then impacts on other areas and I'm beginning to chase my own tail. I think I need a perspective on which bits to include, which ones to ignore and how to get everything working as a coherent design. If anyone has succesfully configured a similar system would you mind letting me know how you did it, which processes you run and how you glued the whole thing together? Here's what I have so far: Private network using 192.168.xxx.xxx - no problems Graphics with kde desktop - configured OK SAMBA - working extremely well Sharity Light to mount dos shares - happy with this too DNS - no reported errors but still problems with IP-assigned addresses. Still not sure about best TTL values, though. Modem - working well with good connection speeds  User-ppp - OK but DNS lookups still cause unexpected dial-outs (have disabled -auto mode temporarily) Sendmail - still trying to access fake 10.0.0.1 address Apache 1.3.6 (using name-virtual hosting) - works fine from within FreeBSD but wins clients can't yet access Firewall - I guess I need one - especially with the wins shares visible on the Unix box, but the thought of setting one up terrifies me. E-mail - use Netscape to fetch own account from ISP POP server, but not sure how this will work across the gateway for the wins clients. If you can provide any useful pointers, suggestions, inspiration or examples of how you did it I shall be eternally grateful. If anyone can tell me which bits of the software I definately don't need, this will be useful too. Many thanks for your help in the past, Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:25:34 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id B1CFF1509C for ; Sat, 9 Oct 1999 08:25:30 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 47562 invoked by uid 1001); 9 Oct 1999 15:25:29 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 15:25:29 -0000 Date: Sat, 9 Oct 1999 11:25:29 -0400 (EDT) From: Jaime Kikpole To: whitehat@home.com Cc: questions@freebsd.org Subject: Re: total lag In-Reply-To: <37FED0DC.2A63CF6D@home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999 whitehat@home.com wrote: > Now I have yet another obstacle. For some reason, KDE is INSANELY slow, > and so does every other WM i've tried. It takes 3 min for netscape to > load, and the machine is grinding like crazy...its working way to hard. > Will it help if I increase my Swap size? right now its 98 MB, and my RAM > is 48MB (so the swap file is rougly two times my RAM, as recommended). Sounds to me like your box is running out of space in RAM to do things, so its trying to swap lots of pages back and forth between swap and RAM. Increase your RAM to 64MB if you can. I run on that and don't have any problems. The problems that you describe remind me of my 486 with 20MB of RAM. For more info, switch to a virtual terminal (Alt-F2), login, and run top. Then, on another virtual terminal (Alt-F1) run X. While its loading (just after the grey screen shows up), hit Alt-Cntrl-F2 to get back to the screen with top on it. Watch the way your box uses the RAM available to it while different programs load. Then use Alt-F4 to get back to X and run some programs (Netscape, xmms, etc.) and switch back to top to see how that effects things. I'm pretty sure that you'll see lots of "In" and "Out" status messages, which indicates that pages of memory are being swapped to and from disk. > Or, mabye increase my root partition (which is currently set at 30MB). This shouldn't be relivant in any way to what you're describing. > Or, mabye its the fact that I didnt > make a /proc partition...here is my current system setup (might help > you) > > Filesystem 1K-blocks Used Avail Capacity Mount > > /dev/wd0s2a 29751 22932 4439 84% / > /dev/wd0s2e 595383 286406 261317 52% /usr > procfs 4 4 0 100% /proc > > Mabye I should create a /proc partition..for some reason FreeBSD > automaticly made that "procfs" entry, perhaps thats whats slowing my > whole system down. Any ideas? The process file system (procfs) is a virtual file system. Its not actually on the disk. Its just a file-system-like representation of what's going on in memory. I've had it on a K5 PR133 (Pentium Rating, 133MHz) with only 16MB of RAM. The only problem on that system was when I ran out of RAM. :) Good luck, Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:28:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web125.yahoomail.com (web125.yahoomail.com [205.180.60.193]) by hub.freebsd.org (Postfix) with SMTP id 5ABC01509C for ; Sat, 9 Oct 1999 08:28:35 -0700 (PDT) (envelope-from osiris2002@yahoo.com) Message-ID: <19991009152957.3007.rocketmail@web125.yahoomail.com> Received: from [168.187.18.208] by web125.yahoomail.com; Sat, 09 Oct 1999 08:29:57 PDT Date: Sat, 9 Oct 1999 08:29:57 -0700 (PDT) From: Joss Roots Subject: Internet Connection Speed - Thanks for reply (WAS:SOMEONE Authoritative ...) To: Steve Doty Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --- Steve Doty wrote: > > > I am not AUTHORITATIVE but anyone on this > mailing list will need a little > more info from you. OK, I only mean to keep away inexperienced people from trying to answer this question because it is already giving me the worste of times. Thanks for reply. >Yes there have been major > changes from 2.2.6 - to 3.0.+ > . but all for the better. > Did you recompile your kernel? YES. my binaries & Kernel are synchronized. >Whats your > limits (type 'limits' in bash) My limits, not neccesiraly under bash, are those of default ROOT account, and they are plenty, Basically , the limits are infinity except for: datasize: 524288 kb stacksize: 65536 kb max processes: 1619 openfiles: 3240 > like? How much ram do you have? Although I dought it is the problem, cuz I am getting Much faster downloads with heavily loaded windows 98, and a lot of applications running. but anyways I have 64 MB RAM. and I am running as ROOT against advice of all people cuz I am the only user on my machine and constantly downloading sysadmin stuff and installing ports, cvsups and stuff. > What exact version of freebsd do you have (type > 'dmesg')? FreeBSD-4.0 Current >How much memory do > you have left after you load kde and your ppp > connection (type 'top')? Well you may have a very good point here, I was shocked to find around 600 KB (yes KB) free using top, cuz I had KDE running, netscape, 2 instances of unix cockpit, and handful of make processes, but well that's what you are expected to do with a BEAST like FreeBSD, anyways, I had also 8 megs inactive, 35 megs active, and 92 megs of free swap space, original size 250 megs of swap. > Ok, Whats the recommendation, can I try to shut down other processes and test, or anything definite here ? Thanks for your reply. ===== MAY THE FORCE BE WITH YOU. __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:29:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 1A3AF1509C for ; Sat, 9 Oct 1999 08:29:35 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11Zymr-000JLt-00 for freebsd-questions@FreeBSD.ORG; Sat, 09 Oct 1999 15:51:57 +0000 Message-ID: <37FF63BE.7E39ED4C@hackfurby.com> Date: Sat, 09 Oct 1999 10:48:15 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: "freebsd-questions@FreeBSD.ORG" Subject: libc version ???? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Okay can someone tell me what version of libc FreeBSD 3.3-RELEASE uses ????? -- Press every key to continue. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:31:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 47DC11509C for ; Sat, 9 Oct 1999 08:31:45 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 47592 invoked by uid 1001); 9 Oct 1999 15:31:44 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 15:31:44 -0000 Date: Sat, 9 Oct 1999 11:31:44 -0400 (EDT) From: Jaime Kikpole To: whitehat@home.com Cc: questions@freebsd.org Subject: Re: total lag In-Reply-To: <37FED0DC.2A63CF6D@home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999 whitehat@home.com wrote: > Filesystem 1K-blocks Used Avail Capacity Mount > > /dev/wd0s2a 29751 22932 4439 84% / > /dev/wd0s2e 595383 286406 261317 52% /usr > procfs 4 4 0 100% /proc After taking a second look at your letter, I realize that I'm talking out of my ass. Forget my suggestions. :) Instead, if you can afford to erase your hard drive and re-install, reinstall FreeBSD and use the auto-defaults setting when you're in the disk label editor. That will get /var (var = variable, in other words it changes often) off of your / partition. Also, if you can, after your finish installing and reboot your box, use ln to make /tmp be nothing more than a link to /usr/tmp. That will help a bit, too. Don't worry about the procfs on /proc. FreeBSD uses that as a virtual file system and it has nothing to do with disk activity. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:33:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id CDF151509C for ; Sat, 9 Oct 1999 08:33:43 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 47603 invoked by uid 1001); 9 Oct 1999 15:33:42 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 15:33:42 -0000 Date: Sat, 9 Oct 1999 11:33:42 -0400 (EDT) From: Jaime Kikpole To: Udo Schweigert Cc: Frankie Li , freebsd-questions@FreeBSD.ORG Subject: Re: two harddrive with same monut point In-Reply-To: <19991009073944.A6829@alaska.cert.siemens.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > On Fri, Oct 08, 1999 at 03:04:07PM -0700, Frankie Li wrote: > > Hi, > > I am wondering if there is anyway I could have > > 2 EIDE hard drive (both 4 GB) under the same > > /usr file system? Many of my current setup for > > a server is based on their home dir, and changing > > them from /usr to something else could be a pain > > in the butt... > > I don't know if this is what you're trying to do, but I think that its possible to mount one of the disks as /usr and the other as /usr/home. Just make sure that the /usr disk is listed in /etc/fstab before the /usr/home disk. Alternatively, you could mount one at /usr and the other at /home and then link /usr/home to /home. Is that what you were looking for? Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:38:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id A78C71509C for ; Sat, 9 Oct 1999 08:38:19 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11ZyvE-000JQe-00; Sat, 09 Oct 1999 16:00:36 +0000 Message-ID: <37FF65BD.D9EE802C@hackfurby.com> Date: Sat, 09 Oct 1999 10:56:45 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Jaime Kikpole Cc: Udo Schweigert , Frankie Li , freebsd-questions@FreeBSD.ORG Subject: Re: two harddrive with same monut point References: Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG
> On Fri, Oct 08, 1999 at 03:04:07PM -0700, Frankie Li wrote:
> > Hi,
> >     I am wondering if there is anyway I could have
> > 2 EIDE hard drive (both 4 GB) under the same
> > /usr file system?  Many of my current setup for
> > a server is based on their home dir, and changing
> > them from /usr to something else could be a pain
> > in the butt...
> >

        I don't know if this is what you're trying to do, but I think that
its possible to mount one of the disks as /usr and the other as /usr/home.
Just make sure that the /usr disk is listed in /etc/fstab before the
/usr/home disk.  Alternatively, you could mount one at /usr and the other
at /home and then link /usr/home to /home.

        Is that what you were looking for?

                                                Jaime


Ummm cant he simply create a partition on each disk, and use ccd to make them appear as one then mount that under /usr ????

this would give him both disks, seen as one volumn mounted under /usr equaling lotsa space

-- 
Actually, Microsoft is sort of a mixture between the Borg and the Ferengi.
  To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:42: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cepheus.azstarnet.com (cepheus.azstarnet.com [169.197.56.195]) by hub.freebsd.org (Postfix) with ESMTP id 490B01509C for ; Sat, 9 Oct 1999 08:41:53 -0700 (PDT) (envelope-from sbcorey@treefort.org) Received: from dialup06ip071 (dialup06ip071.tus.azstarnet.com [169.197.32.199]) by cepheus.azstarnet.com (8.9.3+blt.Beta0/8.9.3) with SMTP id IAA01134; Sat, 9 Oct 1999 08:41:29 -0700 (MST) X-Sent-via: StarNet http://www.azstarnet.com/ From: Scott Corey Reply-To: sbcorey@treefort.org To: trouble@hackfurby.com, TrouBle , Jaime Kikpole Subject: Re: two harddrive with same monut point Date: Sat, 9 Oct 1999 08:52:00 -0700 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain Cc: Udo Schweigert , Frankie Li , freebsd-questions@FreeBSD.ORG References: <37FF65BD.D9EE802C@hackfurby.com> MIME-Version: 1.0 Message-Id: <99100908523700.65936@dialup06ip071> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 09 Oct 1999, TrouBle wrote: Now you want to put this into plain text so the rest of us can read it! > > > >
> On Fri, Oct 08, 1999 at 03:04:07PM -0700, Frankie > Li wrote: >
> > Hi, >
> >     I am wondering if there is anyway I could > have >
> > 2 EIDE hard drive (both 4 GB) under the same >
> > /usr file system?  Many of my current setup for >
> > a server is based on their home dir, and changing >
> > them from /usr to something else could be a pain >
> > in the butt... >
> > >

        I don't know if this is what > you're trying to do, but I think that >
its possible to mount one of the disks as /usr and the other as /usr/home. >
Just make sure that the /usr disk is listed in /etc/fstab before the >
/usr/home disk.  Alternatively, you could mount one at /usr and > the other >
at /home and then link /usr/home to /home. >

        Is that what you were looking > for? >

                                                > Jaime

> >


Ummm cant he simply create a partition on each disk, and use ccd > to make them appear as one then mount that under /usr ???? >

this would give him both disks, seen as one volumn mounted under /usr > equaling lotsa space >

-- 
> Actually, Microsoft is sort of a mixture between the Borg and the Ferengi.
>   > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message -- ain't teknolergy wunnerful? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:44:43 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 866BD1509C for ; Sat, 9 Oct 1999 08:44:40 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 47652 invoked by uid 1001); 9 Oct 1999 15:44:39 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 15:44:39 -0000 Date: Sat, 9 Oct 1999 11:44:39 -0400 (EDT) From: Jaime Kikpole To: TrouBle Cc: Udo Schweigert , Frankie Li , freebsd-questions@FreeBSD.ORG Subject: Re: two harddrive with same monut point In-Reply-To: <37FF65BD.D9EE802C@hackfurby.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, TrouBle wrote: > I don't know if this is what you're trying to do, but > I think that > its possible to mount one of the disks as /usr and the other > as /usr/home. > Just make sure that the /usr disk is listed in /etc/fstab > before the > /usr/home disk. Alternatively, you could mount one at /usr > and the other > at /home and then link /usr/home to /home. > > Is that what you were looking for? > > Jaime > > > Ummm cant he simply create a partition on each disk, and use ccd to make > them appear as one then mount that under /usr ???? > > this would give him both disks, seen as one volumn mounted under /usr > equaling lotsa space I wouldn't know. I never worked with ccd. Is it like vinum? I haven't used vinum either, but I've read a little bit about it. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 8:57:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cepheus.azstarnet.com (cepheus.azstarnet.com [169.197.56.195]) by hub.freebsd.org (Postfix) with ESMTP id AE7E61509C for ; Sat, 9 Oct 1999 08:57:49 -0700 (PDT) (envelope-from sbcorey@treefort.org) Received: from dialup06ip071 (dialup06ip071.tus.azstarnet.com [169.197.32.199]) by cepheus.azstarnet.com (8.9.3+blt.Beta0/8.9.3) with SMTP id IAA03752; Sat, 9 Oct 1999 08:57:41 -0700 (MST) X-Sent-via: StarNet http://www.azstarnet.com/ From: Scott Corey Reply-To: sbcorey@treefort.org To: "Craig C. Brunner(CCB)" , Subject: Re: X....Won't start Date: Sat, 9 Oct 1999 09:06:07 -0700 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain References: <000901bf107a$1875efa0$749858d8@snowbox> MIME-Version: 1.0 Message-Id: <99100909084902.65936@dialup06ip071> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Wed, 06 Oct 1999, Craig C. Brunner(CCB) wrote: > >%_Hey > I installed XF86 3.3.5 > Ive run xfree86config, and when i run startx i get an error: > _X11TransSocketUNIXConnect: Can't connect: errno = 61 > > and it repeats that a buncha times the just quits without starting X > I think it may have to do with my hostname.. but I dunno, Please help > Okay, here come the questions. What type of video card do you have? What Xserver are you running? X doesn't need your hostname. -- ain't teknolergy wunnerful? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:11:48 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cc942873-a.ewndsr1.nj.home.com (cc942873-a.ewndsr1.nj.home.com [24.2.89.207]) by hub.freebsd.org (Postfix) with ESMTP id 39C3F14D3E for ; Sat, 9 Oct 1999 09:11:44 -0700 (PDT) (envelope-from cjc@cc942873-a.ewndsr1.nj.home.com) Received: (from cjc@localhost) by cc942873-a.ewndsr1.nj.home.com (8.9.3/8.9.3) id MAA25906; Sat, 9 Oct 1999 12:14:44 -0400 (EDT) (envelope-from cjc) From: "Crist J. Clark" Message-Id: <199910091614.MAA25906@cc942873-a.ewndsr1.nj.home.com> Subject: Re: hiding directories on ftp server In-Reply-To: from jason at "Oct 9, 1999 09:24:36 am" To: jason@welsh.dynip.com (jason) Date: Sat, 9 Oct 1999 12:14:44 -0400 (EDT) Cc: cjclark@home.com, freebsd-questions@FreeBSD.ORG Reply-To: cjclark@home.com X-Mailer: ELM [version 2.4ME+ PL54 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG jason wrote, > ok, i did that , chmod /home/ftp/pub/leech (leech is the dir I want to > hide) > and when i ftp in with my cruddy dos ftp client (winblows 98) > and do a ls in the pub dir, i can see it.. > -rw-rw---- 1 root jason 3773144 May 26 02:26 Toto - Hold The > Line.mp3 > -rw-rw---- 1 root jason 2751762 Nov 11 1998 Warrant - Cherry > Pie.mp3 > -rw-rw---- 1 root jason 2648456 Jul 10 18:36 [Grass Roots, The] > Let's Live For Today.mp3 > dr-xr-x--x 2 root jason 512 Oct 9 01:33 leech <--**** > -rw-rw---- 1 root jason 2651661 Jan 11 1999 > men_without_hats_-_safetydance.mp3 > > any ideas? I thought that was what you wanted. They cannot 'ls' leech, but they can get items from it if they know the whole pathname. There is no way to make a single file disappear from the listing of a directory using the filesystem permissions. It may very well be possible to do with one of your more complicated ftpd servers... If you are willing to expose yourself to all of the security holes that those have been revealing as of late. -- Crist J. Clark cjclark@home.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:21:24 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 74D2914D71 for ; Sat, 9 Oct 1999 09:21:21 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11Zzaq-000JTN-00; Sat, 09 Oct 1999 16:43:36 +0000 Message-ID: <37FF6FD6.3CC0A8F@hackfurby.com> Date: Sat, 09 Oct 1999 11:39:50 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Jaime Kikpole Cc: Udo Schweigert , Frankie Li , freebsd-questions@FreeBSD.ORG Subject: Re: two harddrive with same monut point References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > I wouldn't know. I never worked with ccd. Is it like vinum? I > haven't used vinum either, but I've read a little bit about it. > > Jaime Okay everybody lets try "man ccd" CCD(4) FreeBSD Kernel Interfaces Manual CCD(4) NAME ccd - Concatenated Disk Driver SYNOPSIS pseudo-device ccd 4 DESCRIPTION The ccd driver provides the capability of combining one or more disks/partitions into one virtual disk. This document assumes that you're familiar with how to generate kernels, how to properly configure disks and pseudo-devices in a kernel configura- tion file, and how to partition disks. Note that the `raw' partitions of the disks should not be combined. The kernel will only allow component partitions of type FS_BSDFFS (type ``4.2BSD'' as shown as disklabel(8)). In order to compile in support for the ccd, you must add a line similar to the following to your kernel configuration file: -- "One world, one web, one program" -- Microsoft promotional ad "Ein Volk, ein Reich, ein Fuehrer" -- Adolf Hitler To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:21:46 1999 Delivered-To: freebsd-questions@freebsd.org Received: from web118.yahoomail.com (web118.yahoomail.com [205.180.60.99]) by hub.freebsd.org (Postfix) with SMTP id E014C14D71 for ; Sat, 9 Oct 1999 09:21:43 -0700 (PDT) (envelope-from osiris2002@yahoo.com) Message-ID: <19991009162252.14822.rocketmail@web118.yahoomail.com> Received: from [168.187.18.208] by web118.yahoomail.com; Sat, 09 Oct 1999 09:22:52 PDT Date: Sat, 9 Oct 1999 09:22:52 -0700 (PDT) From: Joss Roots Subject: Re: Internet Connection Speed - Followup To: Steve Doty Cc: freebsd-questions@freebsd.org MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG --- Steve Doty wrote: > > FreeBSD-4.0 Current > Hmm I have not installed the 4.0 yet, still > working with 3.2. You might be > right and there is something up with this new > version. > Dunno. Well, I have tried this pathway before, and decided not to go there anymore, the only logical answer I'll get if I complain about the version, everyone wil say ok, don't run 4.0-current its for developers, and I really want to be -current, if you know what I mean, although got hit SEVERLY, some 4 months back, and ALL the hard disks got fucked up because of some problems during saving into the filesystems, I did not complain to anyone, I swallowed my mysery, forgot about TONS of software that were lost after very long downloads, and reformatted about 15 Gigs, patiently, quit using FreeBSD for few months, then reinstalled version 3.1 -RELEASE, and at that momnet there was a very stupid thing, the machine swore NOT to connect AT ALL to the net, always giving me very CRAZY error "All received bytes had 7th bit unset" so I figured the system really is angry, so I decided to put up BACK my Free BSD 4.0 -current, same one suspected to have caused Major loss of data, Oh I forgot very important thing to say, that FreeBSD have some problems with writing "or burning" (according to your personal aggressiveness) on HP 8100 CD writer, so I could not save my data really, and I was hit real hard, but you know we always like to keep fighting in this life aint we. > > Try running the pppd connection with out the > x-windows. You can do that by > making a file called > /etc/ppp/myisp.chat > and put this in it > ABORT BUSY ABORT 'NO CARRIER' "" ATZM1L3 OK > ATDT1119999 CONNECT "" TIMEOUT > 10 ogin: mylogin TIMEOUT 5 word: mypass > ok, created the file, and I'll try soooon and I'll get back to you. thanks for the suggestion. > replace the 1119999 with your isp's phone > number and the mylogin,mypass with > your login info. The above should be one line > in the myisp.chat file. > > Now make another file > /etc/ppp/options > and put this in it > # pppd options > /dev/cuaa1 57600 > debug > crtscts > modem > connect "/usr/bin/chat -e -v -f > /etc/ppp/myisp.chat" > persist > domain levee.jaxx.net > 216.24.145.225: > netmask 255.255.255.0 > defaultroute > ok, done that. > You will need to replace the ip info for your > isp. Is you don't have a > static ip replace the 216.24.145.225 with > 0.0.0.0 > Now at this point you should be able to type > just 'pppd' on the command > line. And it should dialout. > I liked using the pppd over the ppp stuff > because I though I got a better > connection.. > > Hope this helps.. If you have problems with the > pppd stuff just email me > back. With the errors you are getting. > I certainly hope so, and thank you very much, will tell you the result of this test, and if its KDE, I think I'll continue using it anyways, cuz I LOVE it. Oh, and by the way, steve you're a real PAL. ===== MAY THE FORCE BE WITH YOU. __________________________________________________ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:32:30 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hotmail.com (f45.law4.hotmail.com [216.33.149.45]) by hub.freebsd.org (Postfix) with SMTP id B9E5714D71 for ; Sat, 9 Oct 1999 09:32:29 -0700 (PDT) (envelope-from fsodah@hotmail.com) Received: (qmail 19839 invoked by uid 0); 9 Oct 1999 16:32:25 -0000 Message-ID: <19991009163225.19838.qmail@hotmail.com> Received: from 212.38.131.194 by www.hotmail.com with HTTP; Sat, 09 Oct 1999 09:32:24 PDT X-Originating-IP: [212.38.131.194] From: "Fadi Sodah" To: questions@freebsd.org Subject: security Date: Sat, 09 Oct 1999 09:32:24 PDT Mime-Version: 1.0 Content-Type: text/plain; format=flowed Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi I am looking to learn more about Unix/BSD security as far as setting up syslog,umask values, file ownership, ftp, creating profiles, NFS, Firewall and anything else to secure severs. Thanks. pons ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:43: 9 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 5AF3715431 for ; Sat, 9 Oct 1999 09:43:03 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 47767 invoked by uid 1001); 9 Oct 1999 16:43:02 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 16:43:02 -0000 Date: Sat, 9 Oct 1999 12:43:02 -0400 (EDT) From: Jaime Kikpole To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, 8 Oct 1999, J McKitrick wrote: > Sometimes when i start FBSD, the mouse won't work in windowmaker. Other > times it is fine. Starting X again or logging out and back in don't work. > Only a reboot cures it. ANy ideas? > FBSD 3.2 > Toshiba Satellite laptop with PS/2 mouse Is this only on WindowMaker? Or do other window managers cause it, too? Try it with twm (which is sort of the original window manager). If it happens there too, its more likely a hardware/config/X problem than a window manager problem. Also, are you using the mouse daemon? Are you using startx or xdm? Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:46:22 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id C66AB14BF3 for ; Sat, 9 Oct 1999 09:46:20 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id LAA14423; Sat, 9 Oct 1999 11:46:17 -0500 (CDT) (envelope-from dan) Date: Sat, 9 Oct 1999 11:46:17 -0500 From: Dan Nelson To: TrouBle Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: removing GCC Message-ID: <19991009114617.A14201@dan.emsphone.com> References: <37FEDCF7.59450877@hackfurby.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37FEDCF7.59450877@hackfurby.com> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 09), TrouBle said: > Okay guys heres one for ya..... > > 3.3-RELEASE comes stock with gcc 2.7.2.3 > > yet in the ports tree there is gcc 2.9.5 ( egcs based ) and i know > 4.0-RELEASE is also EGCS based > > how do i replace the gcc 2.7.2.3 with the newer 2.9.5 and not have it > clobbered by a build world, and use it as my default compiler ?? Install ports/devel/egcs, and stick /usr/local/bin in your path before /usr/bin. Then anything running "gcc" will find gcc 2.9.5, and kernel builds and buildworlds will still use the 2.7.2 that they expect. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 9:47: 8 1999 Delivered-To: freebsd-questions@freebsd.org Received: from probity.mcc.ac.uk (probity.mcc.ac.uk [130.88.200.94]) by hub.freebsd.org (Postfix) with ESMTP id D1C4314BF3 for ; Sat, 9 Oct 1999 09:47:04 -0700 (PDT) (envelope-from jcm@dogma.freebsd-uk.eu.org) Received: from dogma.freebsd-uk.eu.org ([130.88.200.97]) by probity.mcc.ac.uk with esmtp (Exim 1.92 #3) id 11ZzeC-000HEL-00; Sat, 9 Oct 1999 17:47:04 +0100 Received: from localhost (jcm@localhost) by dogma.freebsd-uk.eu.org (8.9.3/8.9.3) with SMTP id RAA69367; Sat, 9 Oct 1999 17:47:03 +0100 (BST) (envelope-from jcm@dogma.freebsd-uk.eu.org) Date: Sat, 9 Oct 1999 17:47:03 +0100 (BST) From: J McKitrick To: Jaime Kikpole Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I use startx rather than xdm, and i haven't tried any other wm's. But it's hard to simulate as well, because i have to shut the computer off each time. But maybe i'll try it. -jm To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 10: 0:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id B1F7C14C83 for ; Sat, 9 Oct 1999 10:00:43 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 47814 invoked by uid 1001); 9 Oct 1999 17:00:42 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 17:00:42 -0000 Date: Sat, 9 Oct 1999 13:00:42 -0400 (EDT) From: Jaime Kikpole To: J McKitrick Cc: freebsd-questions@freebsd.org Subject: Re: mouse lockup in X In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, J McKitrick wrote: > I use startx rather than xdm, and i haven't tried any other wm's. But > it's hard to simulate as well, because i have to shut the computer off > each time. But maybe i'll try it. Try cntrl-alt-backspace to kill a running X session. Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 10:21: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from s8-37-26.student.washington.edu (S8-37-26.student.washington.edu [128.208.37.26]) by hub.freebsd.org (Postfix) with ESMTP id E23AB14C83 for ; Sat, 9 Oct 1999 10:20:58 -0700 (PDT) (envelope-from jcwells@u.washington.edu) Received: from localhost (jcw@localhost) by s8-37-26.student.washington.edu (8.9.3/8.9.3) with ESMTP id WAA86194; Sat, 9 Oct 1999 22:22:49 GMT (envelope-from jcwells@u.washington.edu) X-Authentication-Warning: s8-37-26.student.washington.edu: jcw owned process doing -bs Date: Sat, 9 Oct 1999 22:22:49 +0000 (GMT) From: "Jason C. Wells" X-Sender: jcw@s8-37-26.student.washington.edu Reply-To: "Jason C. Wells" To: Fadi Sodah Cc: questions@FreeBSD.ORG Subject: Re: security In-Reply-To: <19991009163225.19838.qmail@hotmail.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, Fadi Sodah wrote: >Hi >I am looking to learn more about Unix/BSD >security as far as setting up syslog,umask >values, file ownership, ftp, creating profiles, >NFS, Firewall and anything else to secure severs. Install FreeBSD and start learning first hand. :) This is how I did it. Thank You, | http://students.washington.edu/jcwells Jason Wells | "Those who would trade freedom for security deserve neither | freedom nor security." - Benjamin Franklin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 10:38:29 1999 Delivered-To: freebsd-questions@freebsd.org Received: from uberhacker.org (uberhacker.org [207.229.158.98]) by hub.freebsd.org (Postfix) with SMTP id 4184015220 for ; Sat, 9 Oct 1999 10:38:27 -0700 (PDT) (envelope-from pds@uberhacker.org) Received: (qmail 38541 invoked by uid 1000); 9 Oct 1999 17:38:27 -0000 Date: Sat, 9 Oct 1999 12:38:27 -0500 From: "Paul D . Schmidt" To: freebsd-questions@freebsd.org Subject: backup method reccommendation? Message-ID: <19991009123827.E12733@uberhacker.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.6i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I recently bought an HP SureStore 5000eU tape drive and I'm trying to come up with a good method for backing up my system. I was reading about dump/restore, but a dump backup couldn't be used to restore from a 3.2 system to a 3.3 system, which is one of the reasons I need to do it... I thought about using tar, then I can just tar everything up and then selectively restore files or directory trees....but I'm a bit confused about the multi-volume aspect of tar....would the following command line prompt me to change tapes after it has backed up 2GB? (and keep going thru as many tapes as it needs?) tar cvplML 1930 / ? (I did some experiments and it uses the tape drive properly w/o an f arg) Also, I would need to do something like mt rewind before starting my backup, correct? Since you have to explicitly state the tape size on the command line I'm assuming I have to pretend the hardware compression isn't there and just use the maximum guaranteed size of 2GB as opposed to "up to 4GB"? I looked in the handbook, but it only gives a VERY high level blurb about backups and doesn't provide any full solutions....does anyone have any advice or URLs that talk about full backup impementations from command lines to tape rotation techniques? Thanks, Paul -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Paul D. Schmidt UNIX Systems Programmer FreeBSD Advocate "Trust the computer industry to shorten 'Year 2000' to 'Y2K.' It was this kind of thinking that caused the problem in the first place." -Anonymous =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 10:44: 0 1999 Delivered-To: freebsd-questions@freebsd.org Received: from cask.force9.net (cask.force9.net [195.166.128.29]) by hub.freebsd.org (Postfix) with SMTP id 25801151A2 for ; Sat, 9 Oct 1999 10:32:50 -0700 (PDT) (envelope-from ric@sinclairassoc.force9.co.uk) Received: (qmail 18185 invoked from network); 9 Oct 1999 17:32:44 -0000 Received: from unknown (HELO sinclairassoc.force9.co.uk) (212.56.110.181) by cask.force9.net with SMTP; 9 Oct 1999 17:32:44 -0000 Message-ID: <37FF7C7D.F945FF9F@sinclairassoc.force9.co.uk> Date: Sat, 09 Oct 1999 18:33:49 +0100 From: Richard Morte Organization: Sinclair Associates X-Mailer: Mozilla 4.61 [en] (X11; I; FreeBSD 3.2-RELEASE i386) X-Accept-Language: en-GB, en MIME-Version: 1.0 To: Steve Doty Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: FreeBSD Server and Windows Clients References: <01fe01bf1267$59fabfc0$232eea18@jaxx.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Steve Doty wrote: > > >Hi, > > > >I have been trying over the past month to set up the FreeBSD box to > >provide networking facilities to a number of PCs running Windows 95/98. > >I have lots of 'bits' working but have yet to achieve a fully usable > >system. The aims are modest: > > > >* Set up a unix server to drive the local Windows network, allow > > file transfers, print sharing, etc, possibly even backups if > > I can find a suitable application. > >* Provide a intranet to provide a local test-bed for clients' web > > pages, run cgi scripts, etc, without having to upload to the ISP > > to do this. > >* Gateway to the Internet for the unix and win boxes. > > > >I have about 80% of each aspect working OK but am running into problems. > >I configure one bit, but this then impacts on other areas and I'm > >beginning to chase my own tail. I think I need a perspective on which > >bits to include, which ones to ignore and how to get everything working > >as a coherent design. > > > >If anyone has succesfully configured a similar system would you mind > >letting me know how you did it, which processes you run and how you > >glued the whole thing together? > > > >Here's what I have so far: > > Private network using 192.168.xxx.xxx - no problems > > Graphics with kde desktop - configured OK > > SAMBA - working extremely well > > Sharity Light to mount dos shares - happy with this too > > DNS - no reported errors but still problems with IP-assigned > > addresses. Still not sure about best TTL values, > >though. > The default ttl's should work fine.. OK, I have the defaults for db.cache and db127.0.0, but for the local domain (where the locally-configured ip addresses are not going to change), I increased this to 7 days. Ditto for reverse lookup on local domain. See later comments about the cache... > > > Modem - working well with good connection speeds > > User-ppp - OK but DNS lookups still cause unexpected dial-outs > > (have disabled -auto mode temporarily) > > If you type netstat -r and it hangs or has to dialout you need to add any of > the hosts listed in the netstat -r in your local > /etc/hosts. This will stop the machine from trying to resolve the ips from > the outside network, Whoa!!! Yup, it hangs. When I allow a dialout I get loads of stuff. It looks as though most of this must be coming from the cache. My local stuff is quite simple... 192.168.120.1 - for the FreeBSD box 192.168.120.101 - for the first wins machine 192.168.120.102 - for the 2nd wins machine etc 192.168.120.100 - aliased to pn0 with netmask 255.255.255.255 for the apache stuff But what I get from netstat -r is: Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.53.103 UGSc 8 0 tun0 10.0.0.2 10.0.0.1 UH 0 0 tun0 localhost localhost UH 0 137 lo0 192.168.53.103 212.56.119.211 UH 9 0 tun0 192.168.53.108 212.56.120.151 UH 0 0 tun0 192.168.53.109 212.56.110.107 UH 0 0 tun0 192.168.53.110 212.56.111.6 UH 0 0 tun0 192.168.120 link#1 UC 0 0 pn0 sparky 0:a0:cc:54:id:7 UHLW 1 3449 lo0 192.168.120.100/32 link#1 UC 0 0 pn0 ians 0:a0:cc:54:2c:91 UHLW 1 360 pn0 192.168.120.255 ff:ff:ff:ff:ff:ff UHLWb 2 1214 pn0 195.166.129.21 212.56.122.89 UH 0 0 tun0 195.166.129.22 212.56.123.227 UH 0 0 tun0 195.166.129.25 212.56.102.91 UH 0 0 tun0 195.166.129.26 212.56.95.64 UH 0 0 tun0 195.166.129.27 A069-07-02.dial.pl UH 0 0 tun0 255.255.255.255 212.56.123.85 UHb 0 0 tun0 It looks as though much of this stuff arises from the IP-assigned addresses from using: "set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0" in ppp-conf. Clearly there's something not right, but not sure what. > > > Sendmail - still trying to access fake 10.0.0.1 address > What should it be accessing? 10.0.0.1 is the machines ip right? Never really use sendmail much but noticed that since configuring dns and ppp that at 2pm sendmail looks for 10.0.0.1 and other IP-assigned addresses with the consequent dns lookup and dialout. I thought originally this was due to uselesss MX records in the dns configuration (h2n added them by default, but they don't apply to the win boxes), so I deleted them - but to no avail. > > > Apache 1.3.6 (using name-virtual hosting) - works fine from within > > FreeBSD but wins clients can't yet access > > are you using natd for your internal machines? Or do you have them pointing > to the freebsd box as the gateway? Ah... No, because I have been working on configuring ppp using the -alias switch and I didn't think I would need natd because it would only duplicate the effects of -alias. However, since the local intranet doesn't use the dial out connection (or shouldn't), perhaps I do need nat. Dunno, getting confused again... > > > Firewall - I guess I need one - especially with the wins shares > > visible on the Unix box, but the thought of setting > > one up terrifies me. > Its not hard just need to compile FIREWALL into the kernel and then setup > your /etc/rc.firewall. Just make sure your working from the console of the > machine. (don't want to get blocked out of your own machine) OK, I'm going to leave firewalls until I get the rest sorted. But given my configuration would you think that a firewall is [nice, but not strictly necessary|desirable|essential]? > > > E-mail - use Netscape to fetch own account from ISP POP server, > > but not sure how this will work across the gateway > >for > > the wins clients. > Again this will require using 2 ethernet cards and natd. Wish I could tell > you more about natd but I don't have to use it. OK. I'll get the natd issue sorted first, then look at this again. I need to take it a bit at a time. > > > > >If you can provide any useful pointers, suggestions, inspiration or > >examples of how you did it I shall be eternally grateful. If anyone can > >tell me which bits of the software I definately don't need, this will be > >useful too. > > >Many thanks for your help in the past, > >Ric Steve, thanks for replying. Does any of this info help track down what's going wrong? Kind regards, Ric To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 10:51:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 59CB114A1A for ; Sat, 9 Oct 1999 10:51:10 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id LAA06832; Sat, 9 Oct 1999 11:10:35 -0700 (PDT) Date: Sat, 9 Oct 1999 11:10:35 -0700 (PDT) From: Alfred Perlstein To: TrouBle Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: libc version ???? In-Reply-To: <37FF63BE.7E39ED4C@hackfurby.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, TrouBle wrote: > Okay can someone tell me what version of libc FreeBSD 3.3-RELEASE uses > ????? It uses FreeBSD-3.3-libc+fluffy-bunny-stability-mods. -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 11: 0: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 169CF14BE9 for ; Sat, 9 Oct 1999 11:00:01 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11a18P-000Jf7-00; Sat, 09 Oct 1999 18:22:21 +0000 Message-ID: <37FF86FB.6ED9482A@hackfurby.com> Date: Sat, 09 Oct 1999 13:18:35 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Alfred Perlstein Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: libc version ???? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Alfred Perlstein wrote: > > On Sat, 9 Oct 1999, TrouBle wrote: > > > Okay can someone tell me what version of libc FreeBSD 3.3-RELEASE uses > > ????? > > It uses FreeBSD-3.3-libc+fluffy-bunny-stability-mods. > > -Alfred > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message Okay... would you care to enlighten me a lil bit here, what the H*!! are fluffy bunny mods ???? is there not a version of libc std like 2.??? or 3.??? plus our "fluffy bunny mods" -- The dark ages were caused by the Y1K problem. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 11: 8:45 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.netville.com.br (ns2.netville.com.br [200.215.101.2]) by hub.freebsd.org (Postfix) with ESMTP id DC3C614D9E for ; Sat, 9 Oct 1999 11:08:38 -0700 (PDT) (envelope-from sayao@netville.com.br) Received: from Sayao (r109p58.ppp.netville.com.br [200.193.91.78]) by mail.netville.com.br (8.9.3/8.9.3) with SMTP id PAA15750 for ; Sat, 9 Oct 1999 15:03:57 -0300 Message-ID: <000b01bf11c0$3ba93080$c5bbfea9@Sayao> From: "Thiago Sayao" To: Subject: threads Date: Fri, 8 Oct 1999 16:06:30 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG can i compile linuxthreads in freebsd or it's impossible ? thanks, Thiago To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 11:15:17 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 9FC1D14D9E for ; Sat, 9 Oct 1999 11:15:14 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11a1N3-000Jl1-00; Sat, 09 Oct 1999 18:37:29 +0000 Message-ID: <37FF8A89.22053077@hackfurby.com> Date: Sat, 09 Oct 1999 13:33:45 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Thiago Sayao Cc: questions@freebsd.org Subject: Re: threads References: <000b01bf11c0$3ba93080$c5bbfea9@Sayao> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thiago Sayao wrote: > > can i compile linuxthreads in freebsd or it's impossible ? > > thanks, > Thiago > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message id use the GNU pthreads from the ports tree...... -- Where do you think you're going today? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 11:22:14 1999 Delivered-To: freebsd-questions@freebsd.org Received: from slarti.muc.de (slarti.muc.de [193.149.48.10]) by hub.freebsd.org (Postfix) with SMTP id 582A314D9E for ; Sat, 9 Oct 1999 11:22:10 -0700 (PDT) (envelope-from webbasan@snafu.muc.de) Received: (qmail 5803 invoked by uid 66); 9 Oct 1999 18:25:35 -0000 Received: from snafu by slarti with UUCP; Sat Oct 9 18:25:35 1999 -0000 Received: by snafu.muc.de (V1.17-beta/Amiga) id <0jho@snafu.muc.de>; Sat, 9 Oct 99 19:07:44 MEZ Date: Sat, 9 Oct 99 19:07:44 MEZ Message-Id: <28f35376.u10t12e.9c41-webbasan@snafu.muc.de> Organization: 8-) THE GRINSING CREW (-: Reply-To: webbasan@snafu.muc.de (Horst H.G. Weber) X-Charset: iso-8859-1 From: webbasan@snafu.muc.de (Horst H.G. Weber) To: freebsd-questions@FreeBSD.org Subject: Problems with ISDN and 3c900 nic: "xl0: watchdog timeout" !? Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I'm currently running FreeBSD 3.1 and I tried to install isdn4bsd, version 0.83. A while after successfully compiling and booting the kernel with ISDN support, I discovered that I had a problem. The system is a 486DX2, running at 66MHz on an ASUS SP3 Board. The ISA Slots are not in use, I have only PCI boards: - right Slot: 3COM 3c900 Combo Ethernet-Board, set in the BIOS to INT A with IRQ 5 - middle Slot: Fritz!Card PCI ISDN-Board, set in the BIOS to INT B with IRQ 11 - left Slot: miroCystal 12SD VGA-board, set in the BIOS to INT C with IRQ 15 - Internal SCSI set to INT D with IRQ 9. - IDE is disabled, no IDE drives in use. The machine normally has no monitor or keyboard, my standard kernel is setup to use the serial console. So the VGA-board is only used if I need to fiddle with the BIOS... ;-) What happens is, that after booting the kernel with ISDN support, I get this message: "xl0: watchdog timeout" and I can see that the machine has a really bad network performance... So, could it be that there is some odd interaction between the ISDN components and the xl drivers in the kernel? (From the user view, the ISDN part is not in use at this time, only the magic that is done internally in the kernel could interfere...) Or could it be a hardware problem? There are some oddities that may support this idea: - The order of the PCI-boards in the slots does matter! If, for example, the network board is in another slot, the machine doesn't even go into the POST... - Then booting the kernel (my "standard" version or the ISDN version) it claims that all my PCI components use INT A, but it gets the IRQs right. If these messages mean what it seems, this doesn't look right to me. Nevertheless, my standard kernel works flawlessly -- at least from my point of view... (I'm using FreeBSD since version 2.2.5 and never had a reason to look at the kernel messages in detail, so I don't know if other versions did get the "INT"-setup right...) The relevant parts of the kernel messages: My "standard" kernel: [...] Preloaded elf kernel "kernel" at 0xf023b000. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 ncr0: rev 0x01 int a irq 9 on pci0.1.0 chip1: rev 0x00 on pci0.2.0 vga0: rev 0x00 int a irq 15 on pci0.3.0 xl0: <3Com 3c900 Etherlink XL 10BaseT Combo> rev 0x00 int a irq 5 on pci0.5.0 xl0: Ethernet address: 00:60:08:75:1d:5a xl0: selecting BNC port, half duplex Probing for devices on the ISA bus: [...] And the ISDN kernel: [...] Preloaded elf kernel "kernel" at 0xf0278000. Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 ncr0: rev 0x01 int a irq 9 on pci0.1.0 chip1: rev 0x00 on pci0.2.0 vga0: rev 0x00 int a irq 15 on pci0.3.0 isic0: rev 0x02 int a irq 11 on pci0.4.0 isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) xl0: <3Com 3c900 Etherlink XL 10BaseT Combo> rev 0x00 int a irq 5 on pci0.5.0 xl0: Ethernet address: 00:60:08:75:1d:5a xl0: selecting BNC port, half duplex Probing for devices on the ISA bus: [...] I'm currently preparing to upgrade to version 3.3 -- but since upgrading is a very time consuming process on this machine I only do it if it seems very desirable for me. But I'm suspicious if this will help to solve my problem... So -- if anybody could help me: Thanks in advance! Bye, Horst. P.S.: Whilst writing this e-mail, I just tried if the problem is still reproducable (it is), I was reminded of an additional symptom: After running the ISDN kernel, it is not enough to reboot with the non-ISDN kernel to get a stable system again: I have to completely switch it off! It seems that the network board is left in some unusable state that is not reset when the machine reboots... -- Horst H.G. Weber \ webbasan@snafu.muc.de Muenchen, Germany \ weberh@forwiss.tu-muenchen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 11:36: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from dan.emsphone.com (dan.emsphone.com [199.67.51.101]) by hub.freebsd.org (Postfix) with ESMTP id 72BD0153E9 for ; Sat, 9 Oct 1999 11:36:01 -0700 (PDT) (envelope-from dan@dan.emsphone.com) Received: (from dan@localhost) by dan.emsphone.com (8.9.3/8.9.3) id NAA18573; Sat, 9 Oct 1999 13:35:52 -0500 (CDT) (envelope-from dan) Date: Sat, 9 Oct 1999 13:35:52 -0500 From: Dan Nelson To: TrouBle Cc: Alfred Perlstein , "freebsd-questions@FreeBSD.ORG" Subject: Re: libc version ???? Message-ID: <19991009133552.A18506@dan.emsphone.com> References: <37FF86FB.6ED9482A@hackfurby.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37FF86FB.6ED9482A@hackfurby.com> X-OS: FreeBSD 4.0-CURRENT Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG In the last episode (Oct 09), TrouBle said: > Alfred Perlstein wrote: > > On Sat, 9 Oct 1999, TrouBle wrote: > > > > > Okay can someone tell me what version of libc FreeBSD 3.3-RELEASE > > > uses ????? > > > > It uses FreeBSD-3.3-libc+fluffy-bunny-stability-mods. > > Okay... would you care to enlighten me a lil bit here, what the H*!! > are fluffy bunny mods ???? is there not a version of libc std like > 2.??? or 3.??? plus our "fluffy bunny mods" He was making a funny. The version of libc used in FreeBSD 3.3-RELEASE is libc-3.3-release, of course. -- Dan Nelson dnelson@emsphone.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 12:10:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from kremvax.demos.su (kremvax.demos.su [194.87.0.20]) by hub.freebsd.org (Postfix) with ESMTP id 999D515431 for ; Sat, 9 Oct 1999 12:10:28 -0700 (PDT) (envelope-from sinbin.demos.su!yormungandr.demos.su!mishania@kremvax.demos.su) Received: by kremvax.demos.su (8.6.13/D) from 0@sinbin.demos.su [194.87.5.31] for with ESMTP id XAA23934; Sat, 9 Oct 1999 23:10:25 +0400 Received: from yormungandr.demos.su by sinbin.demos.su with ESMTP id XAA96699; (8.6.12/D) Sat, 9 Oct 1999 23:09:55 +0400 Received: (from mishania@localhost) by yormungandr.demos.su (8.9.3/8.9.2) id XAA91540 for questions@freebsd.org; Sat, 9 Oct 1999 23:08:45 +0400 (MSD) (envelope-from mishania) Date: Sat, 9 Oct 1999 23:08:45 +0400 From: "Mikhail A. Sokolov" To: questions@freebsd.org Subject: GTK+ failures to be detected. Message-ID: <19991009230845.A91126@demos.su> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i X-Point-of-View: Gravity is myth, - the earth sucks. Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello, whilst compiling ports, such as wmakerconf, as for instance, xmms or whatever would need gtk+ >1.2.x I come up with a failure of this toolkit to be detected, no matter what gtk version is installed. Checked are: 1.2.{0-5}. However, glib, which comes in the package will do ok, no matter how is GTK installed, from ports or manually. Looks somewhat similiar to PR ports/8490 by Bill Fumerola, ID <199810292102.QAA07692@jade.chc-chimes.com>, although it's refering to 1.1.2. That's from patched 1.2.5 (patches are to keep the installation as suggested by Cris Piazza (?) so that different 2nd level GTK versions reside in appropriate places in X11R6 and /usr/local/ hierarchies): *** Could not run GTK test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means GTK was incorrectly installed *** or that you have moved GTK since it was installed. In the latter case, you *** may want to edit the gtk-config script: /usr/X11R6/bin/gtk-config configure: error: *** GTK >= 1.2.0 not installed - please install first *** file !$ file /usr/X11R6/lib/libgtk12.* /usr/X11R6/lib/libgtk12.a: current ar archive /usr/X11R6/lib/libgtk12.so: symbolic link to libgtk12.so.2 /usr/X11R6/lib/libgtk12.so.2: ELF 32-bit LSB shared object, Intel 80386, version 1 (FreeBSD), not stripped configure:1976: cc -o conftest -Os -pipe -I/usr/X11R6/include/gtk12 -I/usr/local /include -I/usr/X11R6/include -I/usr/local/include/glib12 -I/usr/local/include -I/usr/X11/include/ -I/usr/X11R6/include/ -I/usr/X11R6/include/X11 -I/usr/openwi n/include -I/usr/local/include -L/usr/local/lib -L/usr/X11/lib -L/usr/X11R6/lib -L/usr/openwin/lib -L/usr/local/lib conftest.c -lPropList -lm -L/usr/X11R6/lib -L/usr/X11R6/lib -lgtk -lgdk -L/usr/local/lib -lgmodule12 -lglib12 -lintl -lxpg 4 -lXext -lX11 -lm 1>&5 In file included from /usr/X11R6/include/gtk12/gtk/gtk.h:31, from configure:1968: /usr/X11R6/include/gtk12/gdk/gdk.h:67: parse error before `GDestroyNotify' /usr/X11R6/include/gtk12/gdk/gdk.h:392: parse error before `GDestroyNotify' /usr/X11R6/include/gtk12/gdk/gdk.h:996: parse error before `*' /usr/X11R6/include/gtk12/gdk/gdk.h:996: warning: data definition has no type or storage class In file included from /usr/X11R6/include/gtk12/gtk/gtkobject.h:31, from /usr/X11R6/include/gtk12/gtk/gtkaccelgroup.h:35, from /usr/X11R6/include/gtk12/gtk/gtk.h:32, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkarg.h:74: parse error before `va_list' /usr/X11R6/include/gtk12/gtk/gtkarg.h:93: parse error before `arg_info_1' /usr/X11R6/include/gtk12/gtk/gtkarg.h:95: parse error before `arg_info' In file included from /usr/X11R6/include/gtk12/gtk/gtkaccelgroup.h:35, from /usr/X11R6/include/gtk12/gtk/gtk.h:32, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkobject.h:146: parse error before `GData' /usr/X11R6/include/gtk12/gtk/gtkobject.h:146: warning: no semicolon at end of st ruct or union /usr/X11R6/include/gtk12/gtk/gtkobject.h:329: parse error before `GQuark' /usr/X11R6/include/gtk12/gtk/gtkobject.h:332: parse error before `GQuark' /usr/X11R6/include/gtk12/gtk/gtkobject.h:336: parse error before `GQuark' /usr/X11R6/include/gtk12/gtk/gtkobject.h:338: parse error before `GQuark' /usr/X11R6/include/gtk12/gtk/gtkobject.h:340: parse error before `GQuark' /usr/X11R6/include/gtk12/gtk/gtkobject.h:357: parse error before `va_list' In file included from /usr/X11R6/include/gtk12/gtk/gtkadjustment.h:32, from /usr/X11R6/include/gtk12/gtk/gtkwidget.h:33, from /usr/X11R6/include/gtk12/gtk/gtkmisc.h:32, from /usr/X11R6/include/gtk12/gtk/gtklabel.h:31, from /usr/X11R6/include/gtk12/gtk/gtkaccellabel.h:34, from /usr/X11R6/include/gtk12/gtk/gtk.h:33, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkdata.h:53: field `object' has incomplete type In file included from /usr/X11R6/include/gtk12/gtk/gtkmisc.h:32, from /usr/X11R6/include/gtk12/gtk/gtklabel.h:31, from /usr/X11R6/include/gtk12/gtk/gtkaccellabel.h:34, from /usr/X11R6/include/gtk12/gtk/gtk.h:33, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkwidget.h:174: field `object' has incomplete type In file included from /usr/X11R6/include/gtk12/gtk/gtkbin.h:32, from /usr/X11R6/include/gtk12/gtk/gtkalignment.h:32, from /usr/X11R6/include/gtk12/gtk/gtk.h:35, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkcontainer.h:219: parse error before `va_list' In file included from /usr/X11R6/include/gtk12/gtk/gtkcalendar.h:33, from /usr/X11R6/include/gtk12/gtk/gtk.h:44, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtksignal.h:157: parse error before `GDestroyNotify ' from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkwidget.h:174: field `object' has incomplete type In file included from /usr/X11R6/include/gtk12/gtk/gtkbin.h:32, from /usr/X11R6/include/gtk12/gtk/gtkalignment.h:32, from /usr/X11R6/include/gtk12/gtk/gtk.h:35, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkcontainer.h:219: parse error before `va_list' In file included from /usr/X11R6/include/gtk12/gtk/gtkcalendar.h:33, from /usr/X11R6/include/gtk12/gtk/gtk.h:44, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtksignal.h:157: parse error before `GDestroyNotify ' In file included from /usr/X11R6/include/gtk12/gtk/gtk.h:47, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkclist.h:127: parse error before `gconstpointer' In file included from /usr/X11R6/include/gtk12/gtk/gtk.h:52, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkctree.h:96: parse error before `GNode' /usr/X11R6/include/gtk12/gtk/gtkctree.h:198: parse error before `GNode' /usr/X11R6/include/gtk12/gtk/gtkctree.h:201: parse error before `*' /usr/X11R6/include/gtk12/gtk/gtkctree.h:202: parse error before `GNode' /usr/X11R6/include/gtk12/gtk/gtkctree.h:206: warning: data definition has no typ e or storage class In file included from /usr/X11R6/include/gtk12/gtk/gtk.h:80, from configure:1968: /usr/X11R6/include/gtk12/gtk/gtkitemfactory.h:67: field `object' has incomplete type configure: failed program was: #line 1966 "configure" #include "confdefs.h" #include #include int main() { return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ; return 0; } I am not on the list, please Cc:. -- -mishania To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 12:17:11 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.nwlink.com (smtp.nwlink.com [209.20.130.57]) by hub.freebsd.org (Postfix) with ESMTP id E037A1545E for ; Sat, 9 Oct 1999 12:17:07 -0700 (PDT) (envelope-from rposey@nwlink.com) Received: from rposey (ip38.r9.d.bel.nwlink.com [207.202.174.38]) by smtp.nwlink.com (8.9.3/8.9.3) with SMTP id MAA28969 for ; Sat, 9 Oct 1999 12:16:48 -0700 (PDT) Message-ID: <001501bf128b$95ad9b40$26aecacf@rposey> From: "Robert Posey" To: Subject: Date: Sat, 9 Oct 1999 12:21:37 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG subscribe freebsd-questions rposey@nwlink.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 12:47:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 75D2114DB5 for ; Sat, 9 Oct 1999 12:47:53 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id NAA09594; Sat, 9 Oct 1999 13:07:18 -0700 (PDT) Date: Sat, 9 Oct 1999 13:07:18 -0700 (PDT) From: Alfred Perlstein To: TrouBle Cc: "freebsd-questions@FreeBSD.ORG" Subject: Re: libc version ???? In-Reply-To: <37FF86FB.6ED9482A@hackfurby.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, TrouBle wrote: > Alfred Perlstein wrote: > > > > On Sat, 9 Oct 1999, TrouBle wrote: > > > > > Okay can someone tell me what version of libc FreeBSD 3.3-RELEASE uses > > > ????? > > > > It uses FreeBSD-3.3-libc+fluffy-bunny-stability-mods. > > > > -Alfred > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > Okay... would you care to enlighten me a lil bit here, what the H*!! are > fluffy bunny mods ???? is there not a version of libc std like 2.??? or > 3.??? plus our "fluffy bunny mods" This questions gets asked an answered at least once a week, so here we go again: FreeBSD's libc is FreeBSD's libc derived from 4.4BSD-Lite2, plain and simple. -Alfred > > -- > The dark ages were caused by the Y1K problem. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 12:48:51 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id D410E1545E for ; Sat, 9 Oct 1999 12:48:49 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id NAA09606; Sat, 9 Oct 1999 13:08:05 -0700 (PDT) Date: Sat, 9 Oct 1999 13:08:05 -0700 (PDT) From: Alfred Perlstein To: TrouBle Cc: Thiago Sayao , questions@FreeBSD.ORG Subject: Re: threads In-Reply-To: <37FF8A89.22053077@hackfurby.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, TrouBle wrote: > Thiago Sayao wrote: > > > > can i compile linuxthreads in freebsd or it's impossible ? > > > > thanks, > > Thiago > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message > > id use the GNU pthreads from the ports tree...... or take a look at the native FreeBSD threads, or look at http://lt.tar.com/ -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 12:53: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bekool.com (ns2.netquick.net [216.48.34.2]) by hub.freebsd.org (Postfix) with ESMTP id 220C714DB5 for ; Sat, 9 Oct 1999 12:52:49 -0700 (PDT) (envelope-from trouble@hackfurby.com) Received: from bastille.netquick.net ([216.48.32.159] helo=hackfurby.com ident=root) by bekool.com with esmtp (Exim 3.03 #1) id 11a2tS-000K2V-00; Sat, 09 Oct 1999 20:15:03 +0000 Message-ID: <37FFA166.F9DC675F@hackfurby.com> Date: Sat, 09 Oct 1999 15:11:18 -0500 From: TrouBle Reply-To: trouble@hackfurby.com Organization: Hacked Furbies X-Mailer: Mozilla 4.7 [en] (X11; I; FreeBSD 3.3-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: Alfred Perlstein Cc: Thiago Sayao , questions@FreeBSD.ORG Subject: Re: threads References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG > or take a look at the native FreeBSD threads, or look at > http://lt.tar.com/ > > -Alfred > Ummmm ????? native FreeBSD threads ????? FreeBSD doesnt have pthreads support -- "One world, one web, one program" -- Microsoft promotional ad "Ein Volk, ein Reich, ein Fuehrer" -- Adolf Hitler To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 12:57: 7 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.safepages.com (smtp.safepages.com [192.41.32.27]) by hub.freebsd.org (Postfix) with ESMTP id 3A68314BB8 for ; Sat, 9 Oct 1999 12:57:03 -0700 (PDT) (envelope-from jason@welsh.dynip.com) Received: from welsh.dynip.com (01-016.038.popsite.net [209.198.10.16]) by smtp.safepages.com (8.8.5) id NAA28901; Sat, 9 Oct 1999 13:57:02 -0600 (MDT) X-Authentication-Warning: smtp.safepages.com: Host 01-016.038.popsite.net [209.198.10.16] claimed to be welsh.dynip.com Received: (qmail 17914 invoked by uid 1000); 9 Oct 1999 19:56:27 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 9 Oct 1999 19:56:27 -0000 Date: Sat, 9 Oct 1999 15:56:27 -0400 (EDT) From: jason To: cjclark@home.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: hiding directories on ftp server In-Reply-To: <199910091614.MAA25906@cc942873-a.ewndsr1.nj.home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I wanted the directory to not be visible (as well as the files in it).. but still be able to be downloaded from if they know what file *AND* directory (i.e. I tell them explicitly) to get it from. -- ======================================================================= | Jason Welsh jason@welsh.dynip.com | If you think there's | | | good in everybody, you | | http://welsh.dynip.com/ | haven't met everybody. | ======================================================================= On Sat, 9 Oct 1999, Crist J. Clark wrote: > jason wrote, > > ok, i did that , chmod /home/ftp/pub/leech (leech is the dir I want to > > hide) > > and when i ftp in with my cruddy dos ftp client (winblows 98) > > and do a ls in the pub dir, i can see it.. > > -rw-rw---- 1 root jason 3773144 May 26 02:26 Toto - Hold The > > Line.mp3 > > -rw-rw---- 1 root jason 2751762 Nov 11 1998 Warrant - Cherry > > Pie.mp3 > > -rw-rw---- 1 root jason 2648456 Jul 10 18:36 [Grass Roots, The] > > Let's Live For Today.mp3 > > dr-xr-x--x 2 root jason 512 Oct 9 01:33 leech <--**** > > -rw-rw---- 1 root jason 2651661 Jan 11 1999 > > men_without_hats_-_safetydance.mp3 > > > > any ideas? > > I thought that was what you wanted. They cannot 'ls' leech, but they > can get items from it if they know the whole pathname. > > There is no way to make a single file disappear from the listing of a > directory using the filesystem permissions. It may very well be > possible to do with one of your more complicated ftpd servers... If > you are willing to expose yourself to all of the security holes that > those have been revealing as of late. > -- > Crist J. Clark cjclark@home.com > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 13:31:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from fw.wintelcom.net (ns1.wintelcom.net [209.1.153.20]) by hub.freebsd.org (Postfix) with ESMTP id 12FEF154C2 for ; Sat, 9 Oct 1999 13:31:54 -0700 (PDT) (envelope-from bright@wintelcom.net) Received: from localhost (bright@localhost) by fw.wintelcom.net (8.9.3/8.9.3) with ESMTP id NAA10651; Sat, 9 Oct 1999 13:50:48 -0700 (PDT) Date: Sat, 9 Oct 1999 13:50:48 -0700 (PDT) From: Alfred Perlstein To: TrouBle Cc: Thiago Sayao , questions@FreeBSD.ORG Subject: Re: threads In-Reply-To: <37FFA166.F9DC675F@hackfurby.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, TrouBle wrote: > > > or take a look at the native FreeBSD threads, or look at > > http://lt.tar.com/ > > > > -Alfred > > > > Ummmm ????? native FreeBSD threads ????? FreeBSD doesnt have pthreads > support Yes it does. man pthread I beg you to stop answering newbies questions with mis-information until you learn a lot more about FreeBSD. It doesn't appeal to me to play "damage control" anymore. thanks, -Alfred To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 14:26:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phile.com.au (patty.accessunited.com.au [203.46.135.141]) by hub.freebsd.org (Postfix) with SMTP id 69F3A1550A for ; Sat, 9 Oct 1999 14:26:47 -0700 (PDT) (envelope-from phile@phile.com.au) Received: from willie.accessunited.com.au (willie.accessunited.com.au [203.46.135.139] ) by phile.com.au (Hethmon Brothers Smtpd) ; Sun, 10 Oct 1999 07:30:17 +1000 Message-Id: <199910100730.1733948.6@phile.com.au> From: "Phillip" To: "freebsd-questions@freebsd.org" Date: Sun, 10 Oct 1999 07:27:07 +1100 (EDT) Reply-To: "Phillip" X-Mailer: PMMail 2.00.1500 for OS/2 Warp 4.00 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Bootup kernel error msgs (FBSD 3.3-R) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all. I got around to compiling the kernel for 3.3-RELEASE and it works ok, but I get error messages on boot up in /var/run/messages. The odd thing is that I commented out the devices that it is trying to configure. In the messages file I get lines like: /kernel: config> di ze0 /kernel: No such device: ze0 /kernel: Invalid command or syntax. Type `?' for help. The devices this affects are ze0, lnc0, le0, ie0, fe0, ep0, cs0, wt0, mcd0, matcdc0. I'm a bit confused since they don't only cover NIC's, but proprietary CD stuff etc as well - and, as I said before, they've been commented out from the configuration file. Any suggestions (anatomically possible suggestions preferred). Cheers Phillip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 14:59:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail001.mediacity.com (mail001.mediacity.com [205.216.172.9]) by hub.freebsd.org (Postfix) with SMTP id E88A81508D for ; Sat, 9 Oct 1999 14:59:28 -0700 (PDT) (envelope-from mark@trippcourt.com) Received: (qmail 8783 invoked from network); 9 Oct 1999 21:59:23 -0000 Received: from s20521617551.subnet.mv104.mediacity.com (HELO ?205.216.175.51?) (205.216.175.51) by mail001.mediacity.com with SMTP; 9 Oct 1999 21:59:23 -0000 X-Mailer: Microsoft Outlook Express for Macintosh - 4.01 (295) Date: Sat, 09 Oct 1999 15:07:53 -0700 Subject: Can't build generic kernel from vanilla 3.1 cd From: "Mark Bowles" To: questions@FreeBSD.ORG Mime-version: 1.0 X-Priority: 3 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Message-Id: <19991009215945.E88A81508D@hub.freebsd.org> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi -- I'm writing you because of a mention in the Complete FREEBSD book, page 273. I am trying my first kernel build; I have a laptop which needs the PCCARD stuff, and made up a new configuration file, ran config, and then did the make as suggested. The make bombed out with an include file missing. Just to eliminate my changes from the equation, I then went back and tried to build the GENERIC kernel, with the same result: harry# harry# cd /sys/i386/conf harry# /usr/sbin/config GENERIC Don't forget to do a ``make depend'' Kernel build directory is ../../compile/GENERIC harry# cd ../../compile/GENERIC harry# make [. . . lots of compiles and other stuff ] cc -c -O -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wuninitializ ed -Wformat -Wunused -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../ ../../include -DKERNEL -DVM_STACK -include opt_global.h -elf ../../isofs/cd966 0/cd9660_bmap.c In file included from ../../isofs/cd9660/cd9660_bmap.c:43: ../../sys/vnode.h:457: vnode_if.h: No such file or directory *** Error code 1 Stop. harry# The release is right off the Walnut Creek 3.1 cd rom; I have tried this on a Compaq presario and a Gateway Solo laptop; both have gobs of memory and disk space and are running the GENERIC kernel, unmodified. The laptop is fresh out of the box; I loaded the o/s from the cdrom and haven't even created user accounts on it yet. Does this look familiar? Thanks, -- Mark Bowles To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 15: 8:32 1999 Delivered-To: freebsd-questions@freebsd.org Received: from access.mbnet.mb.ca (access.mbnet.mb.ca [204.112.54.11]) by hub.freebsd.org (Postfix) with ESMTP id 93ED914D75 for ; Sat, 9 Oct 1999 15:08:11 -0700 (PDT) (envelope-from jerwiebe@canada.com) Received: from jer (userBc039.videon.wave.ca [204.112.134.59]) by access.mbnet.mb.ca (8.9.1a/8.9.1) with SMTP id RAA26369 for ; Sat, 9 Oct 1999 17:08:09 -0500 (CDT) From: "Jeremy Wiebe" To: "FreeBSD Questions" Subject: RE: Can't build generic kernel from vanilla 3.1 cd Date: Sat, 9 Oct 1999 17:05:14 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal In-Reply-To: <19991009215945.E88A81508D@hub.freebsd.org> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Looks like your missing the 'make depend' [--snip--] harry# harry# cd /sys/i386/conf harry# /usr/sbin/config GENERIC Don't forget to do a ``make depend'' ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Kernel build directory is ../../compile/GENERIC harry# cd ../../compile/GENERIC harry# make [--snip--] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 15:32: 1 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rknebel.uplink.net (rknebel.uplink.net [209.173.88.243]) by hub.freebsd.org (Postfix) with ESMTP id 5722614F2B for ; Sat, 9 Oct 1999 15:31:45 -0700 (PDT) (envelope-from rknebel@rknebel.uplink.net) Received: (from rknebel@localhost) by rknebel.uplink.net (8.9.3/8.9.3) id SAA00854 for questions@freebsd.org; Sat, 9 Oct 1999 18:30:29 -0400 (EDT) (envelope-from rknebel) Date: Sat, 9 Oct 1999 18:30:29 -0400 From: Rick Knebel To: questions@freebsd.org Subject: Adaptec scsi adapter Message-ID: <19991009183029.A516@rknebel.uplink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I have a new Adaptec 2940U2W PCI Ultra2SCSI ordered. In anticipation I was looking at my kernal config to see what contoller to enable for it and cannot seem to find the right one. Can anyone tell me what controller I use in the kernal config to use this scsi card. Thanks Rick -- Rick Knebel rknebel@uplink.net http://rknebel.uplink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 15:59:21 1999 Delivered-To: freebsd-questions@freebsd.org Received: from www.keycomp.net (www.keycomp.net [207.44.1.33]) by hub.freebsd.org (Postfix) with ESMTP id AB38214F79 for ; Sat, 9 Oct 1999 15:58:53 -0700 (PDT) (envelope-from billieakay@yahoo.com) Received: from bopper (kc-rmt06.keycomp.net [207.44.1.8]) by www.keycomp.net (8.8.5/SCO5) with SMTP id TAA02587; Sat, 9 Oct 1999 19:05:19 -0400 (EDT) Message-ID: <004d01bf12a9$d5f2dee0$01010101@bopper> From: "Bill A. K." To: "Phillip" , "FreeBSD Questions" References: <199910100730.1733948.6@phile.com.au> Subject: Re: Bootup kernel error msgs (FBSD 3.3-R) Date: Sat, 9 Oct 1999 18:58:37 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG hi, there's a file in /boot that runs these config lines, just look at the config files in /boot and edit out the lines when you find the correct file. good luck Bill billieakay@yahoo.com ----- Original Message ----- From: Phillip To: Sent: Saturday, October 09, 1999 4:27 PM Subject: Bootup kernel error msgs (FBSD 3.3-R) > Hi all. I got around to compiling the kernel for 3.3-RELEASE and it works ok, > but I get error messages on boot up in /var/run/messages. > > The odd thing is that I commented out the devices that it is trying to configure. > In the messages file I get lines like: > /kernel: config> di ze0 > /kernel: No such device: ze0 > /kernel: Invalid command or syntax. Type `?' for help. > The devices this affects are ze0, lnc0, le0, ie0, fe0, ep0, cs0, wt0, mcd0, matcdc0. > I'm a bit confused since they don't only cover NIC's, but proprietary CD stuff etc > as well - and, as I said before, they've been commented out from the configuration > file. > > Any suggestions (anatomically possible suggestions preferred). > > Cheers > Phillip > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 16: 2:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phile.com.au (patty.accessunited.com.au [203.46.135.141]) by hub.freebsd.org (Postfix) with SMTP id 4D9AF14DB2 for ; Sat, 9 Oct 1999 16:02:13 -0700 (PDT) (envelope-from phile@phile.com.au) Received: from willie.accessunited.com.au (willie.accessunited.com.au [203.46.135.139] ) by phile.com.au (Hethmon Brothers Smtpd) ; Sun, 10 Oct 1999 09:05:39 +1000 Message-Id: <199910100905.3934220.6@phile.com.au> From: "Phillip" To: "freebsd-questions@freebsd.org" Date: Sun, 10 Oct 1999 09:02:29 +1100 (EDT) Reply-To: "Phillip" X-Mailer: PMMail 2.00.1500 for OS/2 Warp 4.00 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: Bootup kernel error msgs (FBSD 3.3-R) Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Thank you. I've had 2 private replies and they have solved the problem. I understand that this has recently been discussed on the list - and I apologise for rehashing old ground (I just joined this morning - and I didn't see anything in the archives before I posted. Obviously, I didn't look hard enough :( Again, many thanks to those that have helped me. Cheers Phillip >Hi all. I got around to compiling the kernel for 3.3-RELEASE and it works ok, >but I get error messages on boot up in /var/run/messages. > >The odd thing is that I commented out the devices that it is trying to configure. >In the messages file I get lines like: > /kernel: config> di ze0 > /kernel: No such device: ze0 > /kernel: Invalid command or syntax. Type `?' for help. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 16:47:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id 98C6014F40 for ; Sat, 9 Oct 1999 16:47:13 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA54F; Sun, 10 Oct 1999 01:47:12 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id BAA39910; Sun, 10 Oct 1999 01:46:01 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 01:46:01 +0200 From: Jeroen Ruigrok/Asmodai To: TrouBle Cc: Alfred Perlstein , "freebsd-questions@FreeBSD.ORG" Subject: Re: libc version ???? Message-ID: <19991010014601.A38786@daemon.ninth-circle.org> References: <37FF86FB.6ED9482A@hackfurby.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <37FF86FB.6ED9482A@hackfurby.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991009 21:48], TrouBle (trouble@hackfurby.com) wrote: >Alfred Perlstein wrote: >> On Sat, 9 Oct 1999, TrouBle wrote: >> > Okay can someone tell me what version of libc FreeBSD 3.3-RELEASE uses >> > ????? >> It uses FreeBSD-3.3-libc+fluffy-bunny-stability-mods. >Okay... would you care to enlighten me a lil bit here, what the H*!! are >fluffy bunny mods ???? is there not a version of libc std like 2.??? or >3.??? plus our "fluffy bunny mods" Enlightenment: Watch the language. This is a peer forum in which we care to ask question and answer them. Your usage of certain words make people more likely to skip your question. Act civilised. If needed, I can give you guidelines how to be civilised. Second, should you have bothered to look a bit around mailinglists, manpages, sources and other documentation you would have noticed that the libc is identified with a version number suffixed at the end of the library name, such as .so.3, but that this version number is only used for special circumstances. In general our libc has been the same since early 4.4 BSD days. Which brings me to the third item, forget everything you think to know and learn with patience. It comes fast this way. Other nitpick: stop wasting space with all those question marks. HTH, HAND, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best How are the mighty fallen! To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 16:56:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.wxs.nl (smtp01.wxs.nl [195.121.6.61]) by hub.freebsd.org (Postfix) with ESMTP id CDD0914D22 for ; Sat, 9 Oct 1999 16:56:35 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp01.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA656; Sun, 10 Oct 1999 01:56:34 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id BAA39921; Sun, 10 Oct 1999 01:56:39 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 01:56:39 +0200 From: Jeroen Ruigrok/Asmodai To: C J Michaels Cc: FreeBSD Questions Subject: Re: Submitting new ports to the ports tree. Message-ID: <19991010015639.B38786@daemon.ninth-circle.org> References: <002601bf1250$0b9597e0$0200000a@weeble.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <002601bf1250$0b9597e0$0200000a@weeble.dyndns.org> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991009 14:21], C J Michaels (cjm2@earthling.net) wrote: >I know there is a good amount of work involved in this process, just from >the sheer volume of work that is needed, but I was wondering if anyone knew >the avg turn around time for a new port submission to be committed? You betcha a lot of work. The average turn around time? Let me clear this dream for you. It's a volunteer based project, so whenever someone with enough rights feels like he or she has the time to test [very important] and commit those submissions. That said though, our funky crowd of ports committers generally get back on submissions within one or two weeks. >Also, I have noticed that at any one time there are 150 - 200 unassigned, >open "problems" listed for ports, a good number of which are just new or >update ports submissions. Is there anything else that someone like myself >could do to assist with all that work? Ehm, yes and no. =) Yes, you can test the patches, port submission, or whatever the PR details and mail you test results as a follouw-up to the PR. No, you cannot help, since you need CVS commit rights to be able to actually close the PR and commit everything needed. Hope this answers your question a bit, do feel free to read -ports and test, verify new submissions and let the committers know of any results, kind regards, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best I believe because it is Impossible... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17: 0:44 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id C845114D22 for ; Sat, 9 Oct 1999 17:00:40 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 48370 invoked by uid 1001); 10 Oct 1999 00:00:39 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 10 Oct 1999 00:00:39 -0000 Date: Sat, 9 Oct 1999 20:00:39 -0400 (EDT) From: Jaime Kikpole To: Jaye Mathisen Cc: freebsd-questions@freebsd.org Subject: Re: Booting from RAID5 array? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, Jaye Mathisen wrote: > The messages sound normal. > Being SCSI won't affect DOS normal booting, the DPT supports the DOS int13 > functions. If I boot from a DOS boot floppy with fdisk on it, and type fdisk, I get the error message "No fixed disks" (or something like that). My best thoughts are that DOS doesn't find the array at all. Or that the BIOS (or some other part) aren't remporting its existance. Yet booting from FreeBSD 3.3-Release disks (kern.flp and mfs.flp) allows me to install to the disk da0 and see the dpt0 controller. Why would FreeBSD see it and the BIOS (or other part) and MS-DOS not? > When the system boots, does it find the DPT controller first or the > Adaptec? The Netfinity boot messages list the built-in Adaptec SCSI subsystem and then the DPT card. > If it finds the adaptec first, what's cabled up to the adaptec? Originially, the hot-swap bays. Now, nothing at all. I unplugged the SCSI cables from the mother board and plugged them into the DPT card. > If it finds the adaptec first, does it say "No boot devices found, SCSI > BIOS not installed"? Yes. Unless I set the Netfinity's BIOS to ignore the "planar SCSI". (I've heard that IBM called the mother board a "palar". That appears to be how the BIOS name things, too.) > On the DPT when it boots, isn't there an option to hit a Ctrl-D, and > change a couple settings? If so, double check what they are set to... Yes there is. There's very little there that appears to matter. If I turn on EDBA, it causes the system to change its error message from something like "No disk found or disk reset failed" to something like "No boot sector found". What is EDBA? Thanks again, Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17: 6:40 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id A23CB14CF0 for ; Sat, 9 Oct 1999 17:06:35 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAAA7D; Sun, 10 Oct 1999 02:06:33 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id CAA40042; Sun, 10 Oct 1999 02:06:32 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 02:06:31 +0200 From: Jeroen Ruigrok/Asmodai To: Joss Roots Cc: freebsd-questions@freebsd.org Subject: Re: SOMEONE AUTHORITATIVE PLEASE ANSWER THIS FreeBSD Question Message-ID: <19991010020631.C38786@daemon.ninth-circle.org> References: <19991009142059.23869.rocketmail@web106.yahoomail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991009142059.23869.rocketmail@web106.yahoomail.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991009 17:00], Joss Roots (osiris2002@yahoo.com) wrote: >I have been using FreeBSD since 2.2.6 >and now I am running FreeBSD-Current as of few >months, and I am having no problems really, but I >have a constant observation, see I'am getting >really slow internet connection, although using >the same hardware, and net account and everything >else, except for the operating system, on windows >98, the connection is much faster. First observation: why are you running CURRENT? >Since I already have great trust and admiration >for the FreeBSD project, I can assume there must >be something wrong with my system configuration. Thank you, but `we' [allow me to use we in this as meaning the whole of the project] are also prone to make mistakes and that should always be considered a possibility. >I am running kppp for dialup (from the KDE >project), and using pppd (Kernel), I get real >slow downloads. Second observation: why are you running kppp? Userland ppp is much more maintained, stable and way better. >So, anyone can give me some authoritative answer >for this problem, where to look, what to change >and test, or how to get the connection and >downloads to be faster, please give me a hint. I am in no way authorative, nor is it, given your lack of proper background information, possible to determine what may be the exact cause. Ask yourself this: - Are you programmer enough or wellversed in FreeBSD to actually have a valid reason to run CURRENT? - What made you use pppd and not ppp? - How will I get good answers from this forum if I do not provide enough information? HTH, HAND, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best If Winter comes, can Spring be far behind? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17:29:57 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp01.wxs.nl (smtp01.wxs.nl [195.121.6.61]) by hub.freebsd.org (Postfix) with ESMTP id 9229314C80 for ; Sat, 9 Oct 1999 17:29:53 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp01.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAAEE3; Sun, 10 Oct 1999 02:29:52 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id CAA40111; Sun, 10 Oct 1999 02:30:01 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 02:30:01 +0200 From: Jeroen Ruigrok/Asmodai To: Joss Roots Cc: Steve Doty , freebsd-questions@freebsd.org Subject: Re: Internet Connection Speed - Followup Message-ID: <19991010023000.D38786@daemon.ninth-circle.org> References: <19991009162252.14822.rocketmail@web118.yahoomail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991009162252.14822.rocketmail@web118.yahoomail.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991009 20:00], Joss Roots (osiris2002@yahoo.com) wrote: >--- Steve Doty wrote: >> > FreeBSD-4.0 Current >> Hmm I have not installed the 4.0 yet, still >> working with 3.2. You might be >> right and there is something up with this new >> version. >> Dunno. Don't install. FreeBSD-CURRENT is developer's material. >Well, I have tried this pathway before, and >decided not to go there anymore, the only logical >answer I'll get if I complain about the version, >everyone wil say ok, don't run 4.0-current its >for developers, and I really want to be -current, >if you know what I mean, although got hit No, I don't know what you mean. I can only guess you are influenced by either Microsoft or Linux that you actually think newer is better. This is your wake-up call. FreeBSD does NOT work like that. In fact I know people who used FreeBSD from its early days who still run 2.0.x machines for mission critical systems, patched and secured for any security holes discovered later, and whom are quite happy with it. >SEVERLY, some 4 months back, and ALL the hard >disks got fucked up because of some problems Messed up. >during saving into the filesystems, I did not >complain to anyone, I swallowed my mysery, forgot You swallowed your mysery? Good thing. You probably caused this upon yourself by a lack of knowledge since you insisted on running CURRENT. Do not do that. Stick with user friendly releases. CURRENT has been a breeze this year, but it has been known to be rough on those using it if they have little clue what to do in special cases when things go bad. >about TONS of software that were lost after very >long downloads, and reformatted about 15 Gigs, >patiently, quit using FreeBSD for few months, >then reinstalled version 3.1 -RELEASE, and at >that momnet there was a very stupid thing, the >machine swore NOT to connect AT ALL to the net, >always giving me very CRAZY error "All received >bytes had 7th bit unset" so I figured the system You probably misconfigured something. And if that was not the case you would have been wise to check out STABLE and see if there were any bugs present in 3.1-RELEASE after its release. >really is angry, so I decided to put up BACK my The system really is angry? I really don't know what you mean here. Computers do not live. They operate according to software. So either something internal in the OS must have been flakey or your configuration must have been. >Free BSD 4.0 -current, same one suspected to have >caused Major loss of data, Oh I forgot very Which have most likely been your own fault. I run one box here on CURRENT since 2.2.6 last year and have had only hardware problems due to a messed up SCSI termination. I now run a second CURRENT box on which I do most of my development. Neither one have lost data due to the system, except by my own stupidity. So I don't buy your line that you `suspected to have caused major loss of data' is due to the system. >important thing to say, that FreeBSD have some >problems with writing "or burning" (according to >your personal aggressiveness) on HP 8100 CD >writer, so I could not save my data really, and I >was hit real hard, but you know we always like to >keep fighting in this life aint we. FreeBSD provides the basic layers on which third/external party's applications can run which can thus use the underlying layer to accomplish certain tasks. cdrecord from the ports is such a tool, which will ``burn'' CD's by making using of the CAM sublayer. This project is based on volunteerwork. Instead of making this side remark, you could also try to ask around what it takes to get this drive to get fully recognised in the system so that you, and your peers can use it in new releases. You can do this, most of the time, by acquiring techincal information about the driver from the vendor, specsheets, timing tables and programmer's documentation come to mind, and let the appropriate programmers annex developers know of your driver and the documentation you have. This may all sound harsh or unkind, but I am merely trying to make you see that you obviously should not be using CURRENT. You still have a lot to learn with regard to a lot of things FreeBSD, which is fine, I started there myself and am willing to help people who start `down there' again [that is, the bottom of the ladder of FreeBSD, and related, knowledge, not status or anything associated]. One minor nit: could you please use proper capitalisation and punctuation? Your post was hard to read. Let this be a help, HAND, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best I know you have tried, to Feel... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17:38:20 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id B804214C80 for ; Sat, 9 Oct 1999 17:38:17 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA106F; Sun, 10 Oct 1999 02:38:16 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id CAA40279; Sun, 10 Oct 1999 02:38:26 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 02:38:26 +0200 From: Jeroen Ruigrok/Asmodai To: Fadi Sodah Cc: questions@freebsd.org Subject: Re: security Message-ID: <19991010023826.E38786@daemon.ninth-circle.org> References: <19991009163225.19838.qmail@hotmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991009163225.19838.qmail@hotmail.com> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991009 20:00], Fadi Sodah (fsodah@hotmail.com) wrote: >I am looking to learn more about Unix/BSD >security as far as setting up syslog,umask >values, file ownership, ftp, creating profiles, >NFS, Firewall and anything else to secure severs. Sure, start with this: security(7) chflags(1) chown(8) chgrp(1) accton(8) ipfw(8) sockstat(1) natd(8) syslog.conf(5) For other topics try an apropos or man -k to search for it. Chances are, that there exists a manpage which will at least give you some idea of what to ask specifically. Then read back or search on the archives of -security. You will find the archives through the webpages. Also, sites like www.securityfocus.com are a great way to learn about security. Feel free to ask some specific questions about certain topics, since your initial questions is so broad it is hard to answer it in one e-mail. =) HTH, HAND, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Everything comes to those who wait. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17:40:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp03.wxs.nl (smtp03.wxs.nl [195.121.6.37]) by hub.freebsd.org (Postfix) with ESMTP id B084914D75 for ; Sat, 9 Oct 1999 17:40:51 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp03.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA1202; Sun, 10 Oct 1999 02:40:50 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id CAA40292; Sun, 10 Oct 1999 02:41:01 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 02:41:00 +0200 From: Jeroen Ruigrok/Asmodai To: Rick Knebel Cc: questions@freebsd.org Subject: Re: Adaptec scsi adapter Message-ID: <19991010024100.G38786@daemon.ninth-circle.org> References: <19991009183029.A516@rknebel.uplink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991009183029.A516@rknebel.uplink.net> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991010 01:28], Rick Knebel (rknebel@uplink.net) wrote: >I have a new Adaptec 2940U2W PCI Ultra2SCSI ordered. >In anticipation I was looking at my kernal config to see what contoller to >enable for it and cannot seem to find the right one. Please use kernel instead of the wrong-used term kernal. =) >Can anyone tell me what controller I use in the kernal config to use this >scsi card. Sure, provided you have a FreeBSD version which has CAM. This means 2.2-SNAP-CAM or 3.x or later. Simply include the ahc0 driver/controller in your kernel file and you should be settled. HTH, HAND, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best But the time has come when all good things shall pass... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17:43:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from bga.com (mail5.realtime.net [205.238.128.241]) by hub.freebsd.org (Postfix) with SMTP id 32BF6150C3 for ; Sat, 9 Oct 1999 17:43:35 -0700 (PDT) (envelope-from outlawtx@bga.com) Received: from john ([204.181.161.8]) by -0600 ; Sat, 09 Oct 1999 19:43:28 -0600 Message-Id: <3.0.6.32.19991009195136.016b23b0@bga.com> X-Sender: outlawtx@bga.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32) Date: Sat, 09 Oct 1999 19:51:36 -0500 To: "James C. Durham" From: outlawtx@bga.com Subject: copying cds with cdrecord Cc: freebsd-questions@freebsd.org Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, I was wondering what the command syntax is for copying a cdrom using cdrecord. I have a Yamaha cd recorder and a cd rom drive. I would like to put the source disk in the cd rom drive and copy it to the blank disk in the Yamaha cd recorder. Don James To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 17:52:55 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp02.wxs.nl (smtp02.wxs.nl [195.121.6.60]) by hub.freebsd.org (Postfix) with ESMTP id BFABD150C3 for ; Sat, 9 Oct 1999 17:52:52 -0700 (PDT) (envelope-from asmodai@wxs.nl) Received: from daemon.ninth-circle.org ([195.121.198.188]) by smtp02.wxs.nl (Netscape Messaging Server 3.61) with ESMTP id AAA5315; Sun, 10 Oct 1999 02:52:50 +0200 Received: (from asmodai@localhost) by daemon.ninth-circle.org (8.9.3/8.9.3) id CAA40311; Sun, 10 Oct 1999 02:53:00 +0200 (CEST) (envelope-from asmodai) Date: Sun, 10 Oct 1999 02:53:00 +0200 From: Jeroen Ruigrok/Asmodai To: "Mikhail A. Sokolov" Cc: questions@freebsd.org Subject: Re: GTK+ failures to be detected. Message-ID: <19991010025300.H38786@daemon.ninth-circle.org> References: <19991009230845.A91126@demos.su> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991009230845.A91126@demos.su> Organisation: Ninth-Circle Enterprises Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On [19991009 21:49], Mikhail A. Sokolov (mishania@demos.net) wrote: >whilst compiling ports, such as wmakerconf, as for instance, xmms or whatever >would need gtk+ >1.2.x I come up with a failure of this toolkit to be >detected, no matter what gtk version is installed. Checked are: 1.2.{0-5}. >However, glib, which comes in the package will do ok, no matter how is GTK >installed, from ports or manually. Logical. glib is what makes GTk+ work. In other words, glib is dependent upon by GTk+, but not vice versa. >*** Could not run GTK test program, checking why... >*** The test program failed to compile or link. See the file config.log for the >*** exact error that occured. This usually means GTK was incorrectly installed >*** or that you have moved GTK since it was installed. In the latter case, you >*** may want to edit the gtk-config script: /usr/X11R6/bin/gtk-config >configure: error: *** GTK >= 1.2.0 not installed - please install first *** What do you have? gtk12-config or gtk-config? Makes a world of difference. If you have gtk12-config, try making a symlink of gtk-config to gtk12-config. >file /usr/X11R6/lib/libgtk12.* >/usr/X11R6/lib/libgtk12.a: current ar archive >/usr/X11R6/lib/libgtk12.so: symbolic link to libgtk12.so.2 >/usr/X11R6/lib/libgtk12.so.2: ELF 32-bit LSB shared object, Intel 80386, version 1 (FreeBSD), not stripped [snip compile] >configure: failed program was: >#line 1966 "configure" >#include "confdefs.h" > >#include >#include > >int main() { > return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); >; return 0; } 0 lrwxr-xr-x 1 root wheel - 15 Aug 14 18:10 libgtk-1.2.so@ -> libgtk-1.2.so.2 4728 -rwxr-xr-x 1 root wheel - 4828637 Feb 28 1999 libgtk-1.2.so.0* 3240 -rwxr-xr-x 1 root wheel - 3306965 Aug 14 18:10 libgtk-1.2.so.2* That is how I have them, but I made them from the sources myself. Do you update your ports tree regularly? If so then I cannot actually see what is going wrong here and will have to delve deeper into it. If not, could you please try to cvsup the ports to the latest? HTH, -- Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl The BSD Programmer's Documentation Project Network/Security Specialist BSD: Technical excellence at its best Here is, I believe, the fundamental rule of all being: Life is not at all like this. It is completely different... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 18:10:54 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail.netville.com.br (ns2.netville.com.br [200.215.101.2]) by hub.freebsd.org (Postfix) with ESMTP id E5D2314E75 for ; Sat, 9 Oct 1999 18:10:48 -0700 (PDT) (envelope-from sayao@netville.com.br) Received: from Sayao (r109p33.ppp.netville.com.br [200.193.91.53]) by mail.netville.com.br (8.9.3/8.9.3) with SMTP id WAA22839 for ; Sat, 9 Oct 1999 22:06:06 -0300 Message-ID: <000701bf11fb$34f38020$496efea9@Sayao> From: "Thiago Sayao" To: Subject: libs Date: Fri, 8 Oct 1999 23:08:39 -0300 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG the imlib ./configure is not finding the jpeg, tiff, gif, and png libraries that is at /usr/local/lib but if i move the libs to /usr/X11R6/lib it finds! but when i compile it woks but says that the libs are not shared. I'm thinking that it has something to do with the gcc-2.95.1 that i've installed. i'm really confused. :) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 18:22:39 1999 Delivered-To: freebsd-questions@freebsd.org Received: from kremvax.demos.su (kremvax.demos.su [194.87.0.20]) by hub.freebsd.org (Postfix) with ESMTP id 856BC14C37 for ; Sat, 9 Oct 1999 18:22:33 -0700 (PDT) (envelope-from sinbin.demos.su!yormungandr.demos.su!mishania@kremvax.demos.su) Received: by kremvax.demos.su (8.6.13/D) from 0@sinbin.demos.su [194.87.5.31] with ESMTP id FAA18299; Sun, 10 Oct 1999 05:22:29 +0400 Received: from yormungandr.demos.su by sinbin.demos.su with ESMTP id FAA23482; (8.6.12/D) Sun, 10 Oct 1999 05:21:56 +0400 Received: (from mishania@localhost) by yormungandr.demos.su (8.9.3/8.9.2) id FAA01325; Sun, 10 Oct 1999 05:20:45 +0400 (MSD) (envelope-from mishania) Date: Sun, 10 Oct 1999 05:20:45 +0400 From: "Mikhail A. Sokolov" To: Jeroen Ruigrok/Asmodai Cc: "Mikhail A. Sokolov" , questions@freebsd.org Subject: Re: GTK+ failures to be detected. Message-ID: <19991010052045.A752@demos.su> References: <19991009230845.A91126@demos.su> <19991010025300.H38786@daemon.ninth-circle.org> Mime-Version: 1.0 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.95.4i In-Reply-To: <19991010025300.H38786@daemon.ninth-circle.org>; from Jeroen Ruigrok/Asmodai on Sun, Oct 10, 1999 at 02:53:00AM +0200 X-Point-of-View: Gravity is myth, - the earth sucks. Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Oct 10, 1999 at 02:53:00AM +0200, Jeroen Ruigrok/Asmodai wrote: # On [19991009 21:49], Mikhail A. Sokolov (mishania@demos.net) wrote: # # >whilst compiling ports, such as wmakerconf, as for instance, xmms or whatever # >would need gtk+ >1.2.x I come up with a failure of this toolkit to be # >detected, no matter what gtk version is installed. Checked are: 1.2.{0-5}. # >*** Could not run GTK test program, checking why... # >*** may want to edit the gtk-config script: /usr/X11R6/bin/gtk-config # >configure: error: *** GTK >= 1.2.0 not installed - please install first *** # What do you have? gtk12-config or gtk-config? Makes a world of # difference. If you have gtk12-config, try making a symlink of # gtk-config to gtk12-config. I have both, of course. Besides: # gtk-config --version --libs 1.2.5 -L/usr/X11R6/lib -L/usr/X11R6/lib -lgtk -lgdk -L/usr/local/lib -lgmodule12 -lglib12 -lintl -lxpg4 -lXext -lX11 -lm # >configure: failed program was: # >#line 1966 "configure" # >#include "confdefs.h" # >#include Ok, I've made a symlink to , which I missed. # >#include # >int main() { # > return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); # >; return 0; } # 0 lrwxr-xr-x 1 root wheel - 15 Aug 14 18:10 libgtk-1.2.so@ -> libgtk-1.2.so.2 # 4728 -rwxr-xr-x 1 root wheel - 4828637 Feb 28 1999 libgtk-1.2.so.0* # 3240 -rwxr-xr-x 1 root wheel - 3306965 Aug 14 18:10 libgtk-1.2.so.2* # That is how I have them, but I made them from the sources myself. what is 1.2.so.0 ? Anyway, not to mention that we have libs of very different sizes, here's what I have now: # l libgtk* lrwxr-xr-x 1 root wheel 13 10 ÏËÔ 04:57 libgtk-1.2.so -> libgtk12.so.2 lrwxr-xr-x 1 root wheel 13 10 ÏËÔ 04:57 libgtk-1.2.so.2 -> libgtk12.so.2 lrwxr-xr-x 1 root wheel 10 10 ÏËÔ 02:40 libgtk.a -> libgtk12.a lrwxr-xr-x 1 root wheel 13 10 ÏËÔ 05:04 libgtk.so -> libgtk12.so.2 -rw-r--r-- 1 root wheel 1776952 6 ÏËÔ 13:51 libgtk12.a lrwxr-xr-x 1 root wheel 13 6 ÏËÔ 13:51 libgtk12.so -> libgtk12.so.2 -rwxr-xr-x 1 root wheel 1363166 6 ÏËÔ 13:51 libgtk12.so.2 # Do you update your ports tree regularly? If so then I cannot actually # see what is going wrong here and will have to delve deeper into it. If # not, could you please try to cvsup the ports to the latest? Once/hour. Though, I didn't wait for 1.2.5 to appear in ports and patched it myself (and then lost with make clean ;-() And, what are these strange syntax errors, they aren't real. Tough luck with new port of 1.2.5, which is from 'official' port, configure:1974: cc -o conftest -O3 -pipe -I/usr/X11R6/include/gtk12 -I/usr/local/include -I/usr/X11R6/include -I/usr/local/include/glib12 -I/usr/local/include -I/usr/X11/include/ -I/usr/X11R6/include/ -I/usr/X11R6/include/X11 -I/usr/openwin/include -I/usr/X11R6/include -L/usr/local/lib -L/usr/X11/lib -L/usr/X11R6/lib -L/usr/openwin/lib -L/usr/X11R6/lib conftest.c -lPropList -lm -L/usr/X11R6/lib -L/usr/X11R6/lib -lgtk -lgdk -L/usr/local/lib -lgmodule12 -lglib12 -lintl -lxpg4 -lXext -lX11 -lm 1>&5 In file included from /usr/X11R6/include/gtk12/gtk/gtk.h:31, from configure:1966: /usr/X11R6/include/gtk12/gdk/gdk.h:67: parse error before `GDestroyNotify' /usr/X11R6/include/gtk12/gdk/gdk.h:392: parse error before `GDestroyNotify' /usr/X11R6/include/gtk12/gdk/gdk.h:996: parse error before `*' /usr/X11R6/include/gtk12/gdk/gdk.h:996: warning: data definition has no type or storage class Not to mention I don't really see no need to have libgtk.a symlinked to libgtk12.a, errors are still a) the same, b) strange. Besides, if we have different versioning, shouldn't ports, which use GTK+, configure be pathced so it knows where're and appropriate libs? # HTH, Thank you, # Jeroen Ruigrok van der Werven/Asmodai asmodai(at)wxs.nl -- -mishania P.S. are you the one who introduced timing to squid 1.1.18 some years ago? To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 19:16: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from freebie.lemis.com (freebie.lemis.com [192.109.197.137]) by hub.freebsd.org (Postfix) with ESMTP id 8ACCD14D45 for ; Sat, 9 Oct 1999 19:15:57 -0700 (PDT) (envelope-from grog@freebie.lemis.com) Received: (from grog@localhost) by freebie.lemis.com (8.9.3/8.9.0) id LAA16566; Sun, 10 Oct 1999 11:45:47 +0930 (CST) Date: Sun, 10 Oct 1999 11:45:47 +0930 From: Greg Lehey To: Joss Roots Cc: freebsd-questions@FreeBSD.ORG Subject: Problems with kppp (was: SOMEONE AUTHORITATIVE PLEASE ANSWER THIS FreeBSD Question) Message-ID: <19991010114547.A78191@freebie.lemis.com> References: <19991009142059.23869.rocketmail@web106.yahoomail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <19991009142059.23869.rocketmail@web106.yahoomail.com> WWW-Home-Page: http://www.lemis.com/~grog X-PGP-Fingerprint: 6B 7B C3 8C 61 CD 54 AF 13 24 52 F8 6D A4 95 EF Organization: LEMIS, PO Box 460, Echunga SA 5153, Australia Phone: +61-8-8388-8286 Fax: +61-8-8388-8725 Mobile: +61-41-739-7062 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Saturday, 9 October 1999 at 7:20:59 -0700, Joss Roots wrote: > hi there, > I have been using FreeBSD since 2.2.6 and now I am running > FreeBSD-Current as of few months, -CURRENT is for people who know exactly what they're doing. The general attitude is "If you're running -CURRENT, please fix your own problems" > and I am having no problems really, but I have a constant > observation, see I'am getting really slow internet connection, > although using the same hardware, and net account and everything > else, except for the operating system, on windows 98, the connection > is much faster. Do you mean connection setup? Or latency? Or throughput? How do you measure each of these? > Since I already have great trust and admiration for the FreeBSD > project, I can assume there must be something wrong with my system > configuration. > > I am running kppp for dialup (from the KDE project), and using pppd > (Kernel), I get real slow downloads. Note that kppp is not part of FreeBSD. It's part of a port, and I personally think kppp has no reason for existing. If you need help with KDE, you need to talk to the people who wrote it. FreeBSD has two ppp implementations, both of which work fine. > So, anyone can give me some authoritative answer for this problem, > where to look, what to change and test, or how to get the connection > and downloads to be faster, please give me a hint. Dump kppp and install ppp. You'll be glad you did. Greg -- When replying to this message, please copy the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address, home page and phone numbers finger grog@lemis.com for PGP public key To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 19:41:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from caligula.anu.edu.au (caligula.anu.edu.au [150.203.224.42]) by hub.freebsd.org (Postfix) with ESMTP id 3F9D014E8D for ; Sat, 9 Oct 1999 19:41:47 -0700 (PDT) (envelope-from rob@coombs.anu.edu.au) Received: from localhost (rob@localhost) by caligula.anu.edu.au (8.9.3/8.9.1) with ESMTP id MAA07234 for ; Sun, 10 Oct 1999 12:42:40 +1000 (EST) X-Authentication-Warning: caligula.anu.edu.au: rob owned process doing -bs Date: Sun, 10 Oct 1999 12:42:40 +1000 (EST) From: Rob Hurle X-Sender: rob@caligula.anu.edu.au To: freebsd-questions@freebsd.org Subject: Re: StarOffice 5.1 on CDs Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Installing this has been painful, but Ken McGlothlen (mcglk@serv.net) has some some excellent advice at: http://www.serv.net/~mcglk/staroffice-install.html If you are installing from the CD-ROM that you can get from SUN, there are a few changes necessary: Stage1: Paving the way for that obnoxious... Here, you will need to set up a temporary directory (I used /compat/linux/lib/StarOffice, but something in /tmp would be more sensible), and cd into it: cd /tmp/StarOffice Then copy the setup.zip file and unzip it - turning the file names all into lower case: cp /cdrom/linux/office51/setup.zip . unzip -L setup.zip (unzip is in the ports collection). Then proceed as per Ken's instructions: echo "/tmp/StarOffice" >> /compat/linux/etc/ld.so.conf /compat/linux/sbin/ldconfig If you just try to run the "setup" script directly from the CD, it does the same thing with its own temporary directory in /tmp (uses heaps of space - you may not want /tmp on the root file system for this), but does not set up the ld.so.conf file, nor run ldconfig to update ld.so.cache. Hence you get an error. ---------------------------------------------------------- Rob Hurle rob@coombs.anu.edu.au Connect-A Tel: +61 2 6247 2397 PO Box 13 Fax: +61 2 6248 8905 Ainslie ACT 2602 Mobile: 0417 293 603 Australia ---------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 19:49:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mach.greycat.com (mach.greycat.com [207.173.133.5]) by hub.freebsd.org (Postfix) with ESMTP id 9113014E8D for ; Sat, 9 Oct 1999 19:49:28 -0700 (PDT) (envelope-from root@mach.greycat.com) Received: (from root@localhost) by mach.greycat.com (8.9.3/8.9.3) id TAA00371 for questions@freebsd.org; Sat, 9 Oct 1999 19:49:25 -0700 (PDT) (envelope-from root) Date: Sat, 9 Oct 1999 19:49:25 -0700 From: Dann Lunsford To: questions@freebsd.org Subject: PCI sound devices Message-ID: <19991009194925.A353@mach.greycat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've got a Toshiba laptop with builtin PCI sound device. Said device is a ESS ES1978 based thing, claiming to be SBPRO compatible. This comming from Toshiba, it is almost certainly a lie, but for now let's pretend we believe it. Here;s what pciconf -l has to say about it: none0@pci0:12:0: class=0x040100 card=0x00011179 chip=0x1978125d rev=0x10 hdr=0x00 Anybody got a clue as to how I can get this working under FreeBSD? I've been reading code all day, and I *think* I can see where to start, but if someone else has working code, I would ****REALLY**** appreciate seeing it! Thansk! Dann Lunsford To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 19:57:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from www.keycomp.net (www.keycomp.net [207.44.1.33]) by hub.freebsd.org (Postfix) with ESMTP id 36DB914BD2 for ; Sat, 9 Oct 1999 19:57:08 -0700 (PDT) (envelope-from billieakay@yahoo.com) Received: from bopper (kc-rmt13.keycomp.net [207.44.1.15]) by www.keycomp.net (8.8.5/SCO5) with SMTP id XAA03576; Sat, 9 Oct 1999 23:03:26 -0400 (EDT) Message-ID: <011001bf12cb$17c4d5a0$01010101@bopper> From: "Bill A. K." To: "Dann Lunsford" , "FreeBSD Questions" References: <19991009194925.A353@mach.greycat.com> Subject: Re: PCI sound devices Date: Sat, 9 Oct 1999 22:56:45 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2014.211 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2014.211 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Try this: make sure your kernel config file has support for pci (of course) add the line device pcm0 to your kernel config file and recompile and reinstall the kernel and reboot on boot, see if it configures your card as pcm something and made a snd device accordingly e.g. if it configures the card as pcm0 then make a device called snd0 ...............for pcm1 make snd1 and so on but if it dosen't recognize your card as pcm sometime then i don't know what else you can do, maybe someone else can help you. oh and finally use mixer or a similar program to adjust the volume of your sound card or else nothing will output sound!!! good luck Bill billieakay@yahoo.com ----- Original Message ----- From: Dann Lunsford To: Sent: Saturday, October 09, 1999 10:49 PM Subject: PCI sound devices > I've got a Toshiba laptop with builtin PCI sound device. Said device is > a ESS ES1978 based thing, claiming to be SBPRO compatible. This comming > from Toshiba, it is almost certainly a lie, but for now let's pretend we > believe it. Here;s what pciconf -l has to say about it: > > none0@pci0:12:0: class=0x040100 card=0x00011179 chip=0x1978125d rev=0x10 hdr=0x00 > > Anybody got a clue as to how I can get this working under FreeBSD? I've been > reading code all day, and I *think* I can see where to start, but if someone > else has working code, I would ****REALLY**** appreciate seeing it! > > Thansk! > > Dann Lunsford > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 19:57:52 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mail4.lig.bellsouth.net (mail4.lig.bellsouth.net [205.152.0.32]) by hub.freebsd.org (Postfix) with ESMTP id BFD5E14BD2 for ; Sat, 9 Oct 1999 19:57:36 -0700 (PDT) (envelope-from gljohns@bellsouth.net) Received: from gforce.johnson.home (host-209-214-146-153.msy.bellsouth.net [209.214.146.153]) by mail4.lig.bellsouth.net (3.3.4alt/0.75.2) with ESMTP id WAA23232; Sat, 9 Oct 1999 22:57:12 -0400 (EDT) Received: (from glenn@localhost) by gforce.johnson.home (8.9.3/8.9.3) id VAA01032; Sat, 9 Oct 1999 21:57:09 -0500 (CDT) (envelope-from glenn) From: Glenn Johnson Date: Sat, 9 Oct 1999 21:57:09 -0500 To: Dan Nelson Cc: TrouBle , "freebsd-questions@FreeBSD.ORG" Subject: Re: removing GCC Message-ID: <19991009215708.B881@gforce.johnson.home> References: <37FEDCF7.59450877@hackfurby.com> <19991009114617.A14201@dan.emsphone.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3i In-Reply-To: <19991009114617.A14201@dan.emsphone.com> Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, Oct 09, 1999 at 11:46:17AM -0500, Dan Nelson wrote: > In the last episode (Oct 09), TrouBle said: > > > Okay guys heres one for ya..... > > > > 3.3-RELEASE comes stock with gcc 2.7.2.3 > > > > yet in the ports tree there is gcc 2.9.5 ( egcs based ) and i know > > 4.0-RELEASE is also EGCS based > > > > how do i replace the gcc 2.7.2.3 with the newer 2.9.5 and not have > > it clobbered by a build world, and use it as my default compiler ?? > > Install ports/devel/egcs, and stick /usr/local/bin in your path before > /usr/bin. Then anything running "gcc" will find gcc 2.9.5, and kernel > builds and buildworlds will still use the 2.7.2 that they expect. > The egcs port does not install gcc as 'gcc' but 'gcc295'. So putting /usr/local/bin in the path before /usr/bin will not help. Put "CC=gcc295" in your /etc/make.conf file to make it the default compiler for FreeBSD ports. For other things you compile that don't use the FreeBSD make system, you could try 'make CC=gcc295'. In some cases you may have to set it explicitly in the Makefile for the software you are compiling. Under no circumstances however should you blow away the stock gcc 2.7.2.3 compiler as you will need it. -- Glenn Johnson gljohns@bellsouth.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 20: 1:53 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 346D514BD2 for ; Sat, 9 Oct 1999 20:01:45 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 48588 invoked by uid 1001); 10 Oct 1999 03:01:43 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 10 Oct 1999 03:01:43 -0000 Date: Sat, 9 Oct 1999 23:01:43 -0400 (EDT) From: Jaime Kikpole To: root Cc: freebsd-questions@FreeBSD.ORG Subject: Re: new user In-Reply-To: <37D2EEA6.178AE9B@home.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 5 Sep 1999, root wrote: > I am currently running Linux on my system. I would like to try freebsd, > so I downloaded the two start up floppies form the 3.2 image on the > freebsd.org web site. The floppies work fine but the install config does > not see my disk controller. It is an adaptec 2940 controller. There only > seems to be a model 15xx type controller in the device list and it does > not pick up the interrupt or buffer port. Another problem is the network > card. I have an smd 10 baset card which is being found but is not being > initialized when the system is coming up into the install menus. > System is a PentiumII 350, 128mb of memory, 1 gb hard drive. > PS I am not trying to load it on my Linux disk. I am using a spare disk > with a dos partition. > I have followed the directions in the install doc. and would like to > know if I am doing something wrong or if I need a different set of > starter disks. Well, I'm not possitive, but I think that the sound drivers are not in the generic kernel which comes on those disks. You'll have to compile your own kernel and then use MAKEDEV to create the device nodes. Check the handbook (http://www.freebsd.org/handbook) for details. Also, check the compatible hardware listing. Your sound system might not be supported. I'm not sure what's going on with the Adaptec controller, though. Check the handbook (in section 2.1) for the compatible SCSI cards. I think that the 2940 is on it, but I'm not possitive as I'm just learning about using SCSI under FreeBSD as of this week. :) Good luck, Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 20: 8:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from gold1.digiweb.com (gold1.digiweb.com [206.161.225.59]) by hub.freebsd.org (Postfix) with ESMTP id 898C014BD2 for ; Sat, 9 Oct 1999 20:08:10 -0700 (PDT) (envelope-from nobody@gold1.digiweb.com) Received: (from nobody@localhost) by gold1.digiweb.com (8.7.5/8.7.3) id XAA06908; Sat, 9 Oct 1999 23:08:08 -0400 (EDT) Message-Id: <199910100308.XAA06908@gold1.digiweb.com> Reply-To: hexavenger@anti-social.com From: hexavenger@anti-social.com To: freebsd-questions@FreeBSD.ORG Date: Sun, 10 Oct 99 03:08:08 +0000 Subject: root mount error Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I installed free bsd fine, but when i went to run it, i got a message that said error: can not mount root. I have 3 partitions on my disk, the first in windows, the second for file storage, and the third for freebsd. i looked in the manual and it said to type a certain thing, and when i tried it, it still didn't work, what could i possibly do? --------------------------------------------------------------------------- Get your free Anti-Social.com email at http://Anti-Social.com --------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 20:33:10 1999 Delivered-To: freebsd-questions@freebsd.org Received: from malkav.snowmoon.com (machine-126-237.cdcsd.k12.ny.us [208.20.126.237]) by hub.freebsd.org (Postfix) with SMTP id 8B3DD14D21 for ; Sat, 9 Oct 1999 20:33:08 -0700 (PDT) (envelope-from jaime@malkav.snowmoon.com) Received: (qmail 48631 invoked by uid 1001); 10 Oct 1999 03:33:07 -0000 Received: from localhost (sendmail-bs@127.0.0.1) by localhost with SMTP; 10 Oct 1999 03:33:07 -0000 Date: Sat, 9 Oct 1999 23:33:07 -0400 (EDT) From: Jaime Kikpole To: hexavenger@anti-social.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: root mount error In-Reply-To: <199910100308.XAA06908@gold1.digiweb.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, 10 Oct 1999 hexavenger@anti-social.com wrote: > I installed free bsd fine, but when i went to run it, i got a message > that said error: can not mount root. I have 3 partitions on my disk, > the first in windows, the second for file storage, and the third for > freebsd. i looked in the manual and it said to type a certain thing, > and when i tried it, it still didn't work, what could i possibly do? OK, first thing is first.... What did the manual tell you to type, at what point did it tell you to type it, etc. Now for some info for you to consider. Maybe this will help make the manual that you're using make a bit more sense. What FreeBSD calls a "slice" is what Windows calls a "partition". Within that slice, FreeBSD makes what it calls "partitions". See the possible confussion? So, by way of example, root is a partition within a slice. Also, when you said "the second for file storage", did you mean file storage under Windows? If so, it will most likely be a FAT16 or FAT32 file system on that partition. (I'm just being picky here.... As long as you didn't try to use this in FreeBSD without making special considerations, this isn't a big deal.) Jaime To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 21: 6:26 1999 Delivered-To: freebsd-questions@freebsd.org Received: from caligula.anu.edu.au (caligula.anu.edu.au [150.203.224.42]) by hub.freebsd.org (Postfix) with ESMTP id 9739014D8C for ; Sat, 9 Oct 1999 21:06:20 -0700 (PDT) (envelope-from rob@coombs.anu.edu.au) Received: from localhost (rob@localhost) by caligula.anu.edu.au (8.9.3/8.9.1) with ESMTP id OAA10110; Sun, 10 Oct 1999 14:07:12 +1000 (EST) X-Authentication-Warning: caligula.anu.edu.au: rob owned process doing -bs Date: Sun, 10 Oct 1999 14:07:12 +1000 (EST) From: Rob Hurle X-Sender: rob@caligula.anu.edu.au To: freebsd-questions@FreeBSD.ORG Cc: mcglk@serv.net Subject: Re: StarOffice 5.1 on CDs In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Well, I wrote: On Sun, 10 Oct 1999, Rob Hurle wrote: > Installing this has been painful, but Ken McGlothlen > (mcglk@serv.net) has some some excellent advice at: > > http://www.serv.net/~mcglk/staroffice-install.html > > If you are installing from the CD-ROM that you can get from SUN, there are > a few changes necessary: >...etc, etc StarOffice is now installed (without KDE integration since I am not using KDE), and I am now in the endless install loop. Every time I use the `soffice` command, I get the Install screen - modify, uninstall or repair options. Ploughing on, and Office terminates, with no chance to use swriter, etc. A `ps` shows that setup.bin has been launched at some stage - presumably by soffice.bin. Any ideas? Cheers, Rob Hurle ---------------------------------------------------------- Rob Hurle rob@coombs.anu.edu.au Connect-A Tel: +61 2 6247 2397 PO Box 13 Fax: +61 2 6248 8905 Ainslie ACT 2602 Mobile: 0417 293 603 Australia ---------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 21:51:16 1999 Delivered-To: freebsd-questions@freebsd.org Received: from earth.wnm.net (earth.wnm.net [208.246.240.243]) by hub.freebsd.org (Postfix) with ESMTP id 328EA14E63 for ; Sat, 9 Oct 1999 21:50:59 -0700 (PDT) (envelope-from alex@wnm.net) Received: from localhost (alex@localhost) by earth.wnm.net (8.8.8/8.8.8) with ESMTP id XAA02825; Sat, 9 Oct 1999 23:51:01 -0500 (CDT) Date: Sat, 9 Oct 1999 23:51:01 -0500 (CDT) From: Alex Charalabidis To: jason Cc: freebsd-questions@FreeBSD.ORG Subject: Re: hiding directories on ftp server In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, jason wrote: > I wanted the directory to not be visible (as well as the files in it).. > but still be able to be downloaded from if they know what file *AND* > directory (i.e. I tell them explicitly) to get it from. > If you want an ftpd that can run circles around itself, brew coffee and juggle oranges at the same time, proftpd is the obvious choice. Granted, its security record has been abominable lately but, in terms of features like the one you need, I doubt you'll find anything else worth its bacon. Not that I've tried doing what you're trying to do but I've used it for similar restrictive configurations. Ports have not been updated with the latest version afaik (at least two days ago they hadn't), check www.proftpd.org for the newest. -ac -- Alex Charalabidis WebNet Memphis (901) 432-6000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 22: 7:18 1999 Delivered-To: freebsd-questions@freebsd.org Received: from plan9.greycat.com (plan9.greycat.com [207.173.133.6]) by hub.freebsd.org (Postfix) with ESMTP id 1FC2714A21 for ; Sat, 9 Oct 1999 22:07:14 -0700 (PDT) (envelope-from dann@greycat.com) Received: from greycat.com (bigphred.greycat.com [207.173.133.2]) by plan9.greycat.com (8.8.8/8.8.8) with ESMTP id WAA09209; Sat, 9 Oct 1999 22:07:33 -0700 (PDT) Message-ID: <38001F24.559CD33@greycat.com> Date: Sat, 09 Oct 1999 22:07:48 -0700 From: Dann Lunsford Organization: You're kidding, right? X-Mailer: Mozilla 4.5 [en] (X11; U; FreeBSD 3.3-STABLE i386) X-Accept-Language: en MIME-Version: 1.0 To: "Bill A. K." , questions@freebsd.org Subject: Re: PCI sound devices References: <19991009194925.A353@mach.greycat.com> <011001bf12cb$17c4d5a0$01010101@bopper> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG "Bill A. K." wrote: > > Try this: > > make sure your kernel config file has support for pci (of course) > > add the line > > device pcm0 > > to your kernel config file and recompile and reinstall the kernel and reboot > > on boot, see if it configures your card as pcm something and made a snd > device accordingly e.g. if it configures the card as pcm0 then make a Thanks for the thoughts, Bill, but I'm afraid it's a no go. The "card" isn't attached to *any* driver; still comes up as "none0" and "none1" in the pciconf -l listing. There is obviously something I'm missing; no real problem, as I seem to be a permanent resident in the State of Confusion :-) Thanks again! Dann Lunsford To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 22: 8:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from earth.wnm.net (earth.wnm.net [208.246.240.243]) by hub.freebsd.org (Postfix) with ESMTP id C1ED014D7F for ; Sat, 9 Oct 1999 22:08:36 -0700 (PDT) (envelope-from alex@wnm.net) Received: from localhost (alex@localhost) by earth.wnm.net (8.8.8/8.8.8) with ESMTP id AAA03208; Sun, 10 Oct 1999 00:08:38 -0500 (CDT) Date: Sun, 10 Oct 1999 00:08:38 -0500 (CDT) From: Alex Charalabidis To: root Cc: freebsd-questions@FreeBSD.ORG Subject: Re: new user In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 9 Oct 1999, Jaime Kikpole wrote: > On Sun, 5 Sep 1999, root wrote: > > I am currently running Linux on my system. I would like to try freebsd, > > so I downloaded the two start up floppies form the 3.2 image on the > > freebsd.org web site. The floppies work fine but the install config does > > not see my disk controller. It is an adaptec 2940 controller. There only > > seems to be a model 15xx type controller in the device list and it does > > not pick up the interrupt or buffer port. Another problem is the network > > card. I have an smd 10 baset card which is being found but is not being > > initialized when the system is coming up into the install menus. > > System is a PentiumII 350, 128mb of memory, 1 gb hard drive. > > Well, I'm not possitive, but I think that the sound drivers are > not in the generic kernel which comes on those disks. You'll have to > compile your own kernel and then use MAKEDEV to create the device nodes. > Correct. You will have to compile in sound support, period. Be positive :) > I'm not sure what's going on with the Adaptec controller, though. > Check the handbook (in section 2.1) for the compatible SCSI cards. I > think that the 2940 is on it, but I'm not possitive as I'm just learning > about using SCSI under FreeBSD as of this week. :) Never had problems with 3.2 floppies (both RELEASE and STABLE) and 2940 controllers (ahc). Always worked out of the box. Are you sure you don't have a flaky controller? You may want to get a pair of 3.3 floppies anyway since that's the current version and try those. Can't help you with the network card, sorry. Get its precise specs and check the supported hardware in the handbook. -ac -- Alex Charalabidis WebNet Memphis (901) 432-6000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 22:16:28 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp13.bellglobal.com (smtp13.bellglobal.com [204.101.251.52]) by hub.freebsd.org (Postfix) with ESMTP id A9C3414D7F for ; Sat, 9 Oct 1999 22:16:21 -0700 (PDT) (envelope-from a.genkin@utoronto.ca) Received: from main.wgaf.net (HSE-TOR-ppp22867.sympatico.ca [209.226.71.157]) by smtp13.bellglobal.com (8.8.5/8.8.5) with ESMTP id BAA29132 for ; Sun, 10 Oct 1999 01:18:20 -0400 (EDT) Received: from antipode by main.wgaf.net with local (Exim 2.05 #1 (Debian)) id 11aCMZ-0000Xq-00; Sun, 10 Oct 1999 02:21:43 -0400 To: freebsd-questions@freebsd.org Subject: dhclient oddness From: Arcady Genkin Date: 10 Oct 1999 02:21:43 -0400 Message-ID: <87hfjzg2h4.fsf@main.wgaf.net> Lines: 38 User-Agent: Gnus/5.070097 (Pterodactyl Gnus v0.97) XEmacs/21.1 (Biscayne) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all: On a fresh installation of 3.3-RELEASE, dhclient won't work with my two interfaces. I have in my kernel conf the following: device ed0 at isa? port 0x240 net irq 10 iomem 0xd8000 device ed1 at isa? port 0x300 net irq 11 iomem 0xd8000 At boot time both nics get detected: ed0 at 0x240-0x25f irq 10 on isa ed0: address 00:80:c8:ec:0f:39, type NE2000 (16 bit) ed1 at 0x300-0x31f irq 11 on isa ed1: address 52:54:4c:17:c9:5c, type NE2000 (16 bit) I have the following in my /etc/rc.conf: network_interfaces="ed0 ed1 lo0" ifconfig_ed0="inet 192.168.1.1 netmask 255.255.255.0" ifconfig_ed1="DHCP" Is there anything missing? Dhclient works fine if I disable one of the cards (it works with either of them equally successfully). Both cards also work *together* if I hard-code the IP address on ed1 with "ifconfig" and "route". Please point me in the right direction. I looked at manpages for dhclient, and dhclient.conf, but didn't find any clues in there. Thanks! -- Arcady Genkin "You should seek your enemy, you should wage your war -- a war for your opinions. And if your opinion is defeated, your honesty should still cry triumph over that!" (F. Nietzsche) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 22:26:25 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp13.bellglobal.com (smtp13.bellglobal.com [204.101.251.52]) by hub.freebsd.org (Postfix) with ESMTP id 476AE151A3 for ; Sat, 9 Oct 1999 22:26:02 -0700 (PDT) (envelope-from a.genkin@utoronto.ca) Received: from main.wgaf.net (HSE-TOR-ppp22867.sympatico.ca [209.226.71.157]) by smtp13.bellglobal.com (8.8.5/8.8.5) with ESMTP id BAA29762 for ; Sun, 10 Oct 1999 01:28:02 -0400 (EDT) Received: from antipode by main.wgaf.net with local (Exim 2.05 #1 (Debian)) id 11aCR7-0000Y5-00; Sun, 10 Oct 1999 02:26:25 -0400 To: freebsd-questions@freebsd.org Subject: Specifying default route From: Arcady Genkin Date: 10 Oct 1999 02:26:25 -0400 Message-ID: <87905bg29a.fsf@main.wgaf.net> Lines: 16 User-Agent: Gnus/5.070097 (Pterodactyl Gnus v0.97) XEmacs/21.1 (Biscayne) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all: What's the correct way of specifying default route, if a machine has 2 nics? I imagine there should be something like default_route="ed1" to be inserted into /etc/rc.conf, but I couldn't find alike option in rc.conf's man page. Thanks for any pointers! -- Arcady Genkin "You should seek your enemy, you should wage your war -- a war for your opinions. And if your opinion is defeated, your honesty should still cry triumph over that!" (F. Nietzsche) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 23:25: 6 1999 Delivered-To: freebsd-questions@freebsd.org Received: from phile.com.au (patty.accessunited.com.au [203.46.135.141]) by hub.freebsd.org (Postfix) with SMTP id B715415265 for ; Sat, 9 Oct 1999 23:23:14 -0700 (PDT) (envelope-from phile@phile.com.au) Received: from willie.accessunited.com.au (willie.accessunited.com.au [203.46.135.139] ) by phile.com.au (Hethmon Brothers Smtpd) ; Sun, 10 Oct 1999 16:26:43 +1000 Message-Id: <199910101626.4337052.6@phile.com.au> From: "Phillip" To: "freebsd-questions@freebsd.org" Date: Sun, 10 Oct 1999 16:23:33 +1100 (EDT) Reply-To: "Phillip" X-Mailer: PMMail 2.00.1500 for OS/2 Warp 4.00 In-Reply-To: <87905bg29a.fsf@main.wgaf.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Subject: Re: Specifying default route Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG >What's the correct way of specifying default route, if a machine has 2 >nics? I imagine there should be something like > >default_route="ed1" I'm not sure why there isn't an option in /etc/rc.conf because I think from memory this is setup at time of installation. And depending on which machine is being used to route the packets into and out of your network, it may or may not be on your local machine. On my boxes, the line in /etc/rc.conf reads as: defaultrouter="123.45.67.8" (this is obviously a fictional IP # - but note it is an IP number and not an interface descriptor). Cheers Phillip To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 23:29:37 1999 Delivered-To: freebsd-questions@freebsd.org Received: from thoth.mch.sni.de (thoth.mch.sni.de [192.35.17.2]) by hub.freebsd.org (Postfix) with ESMTP id 517BD15264 for ; Sat, 9 Oct 1999 23:29:01 -0700 (PDT) (envelope-from ust@cert.siemens.de) X-Envelope-Sender-Is: ust@cert.siemens.de (at relayer thoth.mch.sni.de) Received: from mail1.siemens.de (mail1.siemens.de [139.23.33.14]) by thoth.mch.sni.de (8.9.3/8.9.3) with ESMTP id IAA02162; Sun, 10 Oct 1999 08:28:56 +0200 (MET DST) Received: from mars.cert.siemens.de (ust.mchp.siemens.de [139.23.201.17]) by mail1.siemens.de (8.9.3/8.9.3) with ESMTP id IAA10700; Sun, 10 Oct 1999 08:28:55 +0200 (MET DST) Received: from alaska.cert.siemens.de (alaska.cert.siemens.de [139.23.202.134]) by mars.cert.siemens.de (8.9.3/8.9.3/Siemens CERT [ $Revision: 1.9 ]) with ESMTP id IAA66300; Sun, 10 Oct 1999 08:28:55 +0200 (CEST) Received: (from ust@localhost) by alaska.cert.siemens.de (8.9.3/8.9.3/alaska [ $Revision: 1.2 ]) id GAA12084; Sun, 10 Oct 1999 06:28:55 GMT (envelope-from ust) Date: Sun, 10 Oct 1999 08:28:55 +0200 From: Udo Schweigert To: Arcady Genkin Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Specifying default route Message-ID: <19991010082855.A12040@alaska.cert.siemens.de> References: <87905bg29a.fsf@main.wgaf.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre2i In-Reply-To: <87905bg29a.fsf@main.wgaf.net> X-Operating-System: FreeBSD 3.3-STABLE Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sun, Oct 10, 1999 at 02:26:25AM -0400, Arcady Genkin wrote: > Hi all: > > What's the correct way of specifying default route, if a machine has 2 > nics? I imagine there should be something like > > default_route="ed1" > I just checked "man rc.conf" and it gives (under 3.3-RELEASE): ...... defaultrouter (str) If not set to NO then create a default route to this host name or IP address (use IP address value if you also require this router to get to a name server!) ....... Anyway: the case for specifying an interface is not described here, but in your case you should do defaultrouter="-interface ed1" in your /etc/rc.conf.local. Regards ------------------------------------------------------------------------------- Udo Schweigert || Voice : +49 89 636 42170 Siemens AG, Siemens CERT || Fax : +49 89 636 41166 ZT IK 3 || email : Udo.Schweigert@mchp.siemens.de D-81730 Muenchen / Germany || : ust@cert.siemens.de PGP fingerprint || 2A 53 F6 A6 30 59 64 02 6B C4 E0 73 B2 C9 6C E7 ------------------------------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 23:51: 5 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp11.bellglobal.com (smtp11.bellglobal.com [204.101.251.53]) by hub.freebsd.org (Postfix) with ESMTP id 95C721527C for ; Sat, 9 Oct 1999 23:50:55 -0700 (PDT) (envelope-from edirol@anime.ca) Received: from epoch.anime.ca (HSE-TOR-ppp25616.sympatico.ca [209.226.82.113]) by smtp11.bellglobal.com (8.8.5/8.8.5) with ESMTP id CAA07338 for ; Sun, 10 Oct 1999 02:54:43 -0400 (EDT) Received: from magus (magus.anime.ca [192.168.0.3]) by epoch.anime.ca (8.9.3/8.9.3) with SMTP id CAA07360 for ; Sun, 10 Oct 1999 02:50:47 -0400 (EDT) (envelope-from edirol@anime.ca) Message-ID: <001301bf12eb$cbb34040$0300a8c0@anime.ca> From: "Edirol" To: Subject: kernel arp errors Date: Sun, 10 Oct 1999 02:50:47 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, Once in a while I seem to be getting this error message in my logs. Oct 9 21:32:58 schala /kernel: arp: 192.168.0.2 is on ed0 but got reply from 00:40:05:a9:88:45 on ed1 Sometimes 192.168.0.X comes up too. I suspect this has something to do with the @home cable service that I'm using. Does anyone know how I can stop this error from reoccuring? ed0 is for my local network at home and ed1 is my cable modem. The netmask for my ed1 device is set to 255.255.252.0 as that was what was provided by @home. Thanks, - Will Here is my ifconfig -a output: ed0: flags=8843 mtu 1500 inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 ether 00:80:c6:f8:98:6f ed1: flags=8843 mtu 1500 inet 24.112.80.104 netmask 0xfffffc00 broadcast 24.112.83.255 ether 00:e0:29:16:71:7f lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message From owner-freebsd-questions Sat Oct 9 23:55:38 1999 Delivered-To: freebsd-questions@freebsd.org Received: from smtp.mho.net (smtp.mho.net [206.26.105.6]) by hub.freebsd.org (Postfix) with ESMTP id 8367415186 for ; Sat, 9 Oct 1999 23:55:26 -0700 (PDT) (envelope-from tstewart@mho.net) Received: from mho.net ([206.156.104.198]) by smtp.mho.net (Post.Office MTA v3.5.3 release 223 ID# 0-0U10L2S100V35) with ESMTP id net for ; Sun, 10 Oct 1999 00:55:23 -0600 Message-ID: <38003C26.453DAE9D@mho.net> Date: Sun, 10 Oct 1999 01:11:34 -0600 From: Tom Stewart X-Mailer: Mozilla 4.61 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: CPU Issue... Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hello! Question: Is the FreeBSD OS compatible with AMD K6-2, K6-3, and K7 series processors? Thanks, Tom. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message