Date: Tue, 23 Nov 1999 11:27:31 +0100 (CET) From: Gerhard Schmidt <estartu@augusta.de> To: FreeBSD-gnats-submit@freebsd.org Subject: i386/15062: i4 problem with ascend terminalserver Message-ID: <199911231027.LAA88517@sbgate.starbox.augusta.de>
next in thread | raw e-mail | index | archive | help
>Number: 15062 >Category: i386 >Synopsis: i4b stops working after some time >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Nov 23 02:40:00 PST 1999 >Closed-Date: >Last-Modified: >Originator: Gerhard Schmidt >Release: FreeBSD 3.2-STABLE i386 >Organization: Augsburger Computer Forum e.V. >Environment: FreeBSD sbgate.starbox.augusta.de 3.2-STABLE FreeBSD 3.2-STABLE #0: Sat Jul 31 15:46:08 CEST 1999 root@sbgate.starbox.augusta.de:/usr/src/sys/compile/SBGATE i386 >Description: I use i4b for nearly a year with my local ISP. Last week they switched from a US Robotics Terminal Server to two Ascent Terminalserver. I change my config to the new Destination address. Everything worked for some hours. My system is configured as Dial on Demand. 4 hour later I tried to connect, i4b connected an disconnected after few seconds. an repeated to connect over 40 times with the same result. I activated the debug option and got the following output Nov 23 10:37:40 sbgate /kernel: isp0: lcp open(initial) Nov 23 10:37:40 sbgate /kernel: isp0: phase establish Nov 23 10:37:40 sbgate /kernel: isp0: Up event Nov 23 10:37:40 sbgate /kernel: isp0: lcp up(starting) Nov 23 10:37:40 sbgate /kernel: isp0: lcp output <conf-req id=0xc6 len=10 05-06-43-75-49-b3> Nov 23 10:37:41 sbgate /kernel: isp0: lcp input(req-sent): <conf-req id=0x1 len=21 01-04-05-f4-03-04-c0-23-13-09-03-00-c0-7b-8f-49-2a> Nov 23 10:37:41 sbgate /kernel: isp0: lcp parse opts: mru auth-proto 0x13 [rej] send conf-rej Nov 23 10:37:41 sbgate /kernel: isp0: lcp output <conf-rej id=0x1 len=13 13-09-03-00-c0-7b-8f-49-2a> Nov 23 10:37:41 sbgate /kernel: isp0: lcp input(req-sent): <conf-ack id=0xc6 len=10 05-06-43-75-49-b3> Nov 23 10:37:41 sbgate /kernel: isp0: lcp input(ack-rcvd): <conf-req id=0x2 len=12 01-04-05-f4-03-04-c0-23> Nov 23 10:37:41 sbgate /kernel: isp0: lcp parse opts: mru auth-proto Nov 23 10:37:41 sbgate /kernel: isp0: lcp parse opt values: mru 1524 auth-proto send conf-ack Nov 23 10:37:42 sbgate /kernel: isp0: lcp output <conf-ack id=0x2 len=12 01-04-05-f4-03-04-c0-23> Nov 23 10:37:42 sbgate /kernel: isp0: lcp tlu Nov 23 10:37:42 sbgate /kernel: isp0: phase authenticate Nov 23 10:37:42 sbgate /kernel: isp0: pap output <req id=0xc7 len=22 **-**-**-**-**-**-**-**-**-**-**-**-**-**-**-**-**-**> Nov 23 10:37:42 sbgate /kernel: isp0: pap success Nov 23 10:37:42 sbgate /kernel: isp0: phase network Nov 23 10:37:43 sbgate /kernel: isp0: ipcp open(stopped) Nov 23 10:37:43 sbgate /kernel: isp0: lcp close(opened) Nov 23 10:37:43 sbgate /kernel: isp0: phase terminate Nov 23 10:37:43 sbgate /kernel: isp0: lcp output <term-req id=0xc8 len=4> Nov 23 10:37:43 sbgate /kernel: isp0: invalid input protocol <addr=0xff ctrl=0x3 proto=0x80fd> Nov 23 10:37:43 sbgate /kernel: isp0: lcp input(closing): <term-ack id=0xc8 len=4> Nov 23 10:37:43 sbgate /kernel: isp0: phase dead Nov 23 10:37:43 sbgate /kernel: isp0: lcp down(closed) Nov 23 10:37:43 sbgate /kernel: isp0: Down event (carrier loss) Nov 23 10:37:43 sbgate /kernel: isp0: lcp close(initial) The Problem Remains til I reboot. After the reboot everything work fine for some hours and then the Problem returns. >How-To-Repeat: >Fix: reboot the system, but thats not realy a option. >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199911231027.LAA88517>