Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 26 Aug 2004 16:58:48 -0400
From:      "Christophe Boy" <>
To:        <>
Subject:   Soekris 4501 pccard problem
Message-ID:  <!~!>

Next in thread | Raw E-Mail | Index | Archive | Help
This is a multi-part message in MIME format.

Content-Type: text/plain;
Content-Transfer-Encoding: quoted-printable

Hello I've seen your message on the internet and I've the same problem
trying to install a pcmcia modem in soekris 4511 :


Did you resolve it ?


Here is my dmesg :=20


Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

            The Regents of the University of California. All rights

FreeBSD 5.2.1-RELEASE #10: Thu Aug 26 10:52:28 GMT 2004

Preloaded elf kernel "/boot/kernel/kernel" at 0xc0716000.

Timecounter "i8254" frequency 1193182 Hz quality 0

CPU: AMD Enhanced Am486DX4/Am5x86 Write-Back (486-class CPU)

  Origin =3D "AuthenticAMD"  Id =3D 0x494  Stepping =3D 4


real memory  =3D 67108864 (64 MB)

avail memory =3D 59908096 (57 MB)

npx0: [FAST]

npx0: <math processor> on motherboard

npx0: INT 16 interface

pcibios: BIOS version 2.00

sysctl machdep.i8254_freq=3D1189161 returns 0

Timecounter "ELAN" frequency 8333333 Hz quality 1000

pcib0: <AMD Elan SC520 host to PCI bridge> at pcibus 0 on motherboard

pci0: <PCI bus> on pcib0

cbb0: <TI1410 PCI-CardBus Bridge> mem 0xa0000000-0xa0000fff irq 10 at =
9.0 on pci0

cardbus0: <CardBus bus> on cbb0

pccard0: <16-bit PCCard bus> on cbb0

cbb0: [MPSAFE]

sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem
0xa0001000-0xa0001fff irq 11 at device 18.0 on pci0

sis0: Silicon Revision: DP83816A

sis0: Ethernet address: 00:00:24:c2:8e:c0

miibus0: <MII bus> on sis0

ukphy0: <Generic IEEE 802.3u media interface> on miibus0

ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0002000-0xa0002fff irq 5 at device 19.0 on pci0

sis1: Silicon Revision: DP83816A

sis1: Ethernet address: 00:00:24:c2:8e:c1

miibus1: <MII bus> on sis1

ukphy1: <Generic IEEE 802.3u media interface> on miibus1

ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

isa0: <ISA bus> on motherboard

orm0: <Option ROM> at iomem 0xc8000-0xd0fff on isa0

pmtimer0 on isa0

ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0

ata0: [MPSAFE]

ata1 at port 0x376,0x170-0x177 irq 15 on isa0

ata1: [MPSAFE]

atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0

psm0: unable to get the current command byte value.

fdc0: ready for input in output

fdc0: cmd 3 failed at out byte 1 of 3

ppc0: parallel port not found.

sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0

sio0: type 16550A, console

sio1 at port 0x2f8-0x2ff irq 3 on isa0

sio1: type 16550A

Timecounters tick every 4.000 msec

Elan-mmcr driver: MMCR at 0xc63d4000.

pccard0: Allocation failed for cfe 15

pccard0: Allocation failed for cfe 23

cbb0: ready never happened, status =3D 4f

sio4: <PCMCIA   56K V.90 Fax Modem (LK) > at port 0x3e8-0x3ef irq 10
function 0 config 31 on pccard0

sio4: type 16550A

sio4: unable to activate interrupt in fast mode - using normal mode




The system froze directly after .



Any Idea .

     Christophe Boy=20
IT Management Specialist
Mail :  <>
Altea Communications
2231 rue Coursol

H3J1C6 Montreal Quebec Canada

The Network Expertise
( Network Management & Performance Tools LAN/WAN )
Tel : (514) 937-3381
Fax : (514) 937-3383
WWW :  <>;