Date: Wed, 24 Jul 2002 00:51:44 -0700 From: "/Dev/Ghost" <DevGhost@hotmail.com> To: <freebsd-smp@FreeBSD.org> Subject: Unable to boot dual PII system Message-ID: <OE29prhup7IpGwC6RZT00004689@hotmail.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0007_01C232AC.48122E70
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hello everyone !
I recently came across a acer altos 9100b, dual PII-400 with 1G ram. =
I've decided to install FreeBSD 4.6 (ISO) on it to be my main server. =
This is not my first FreeBSD install but it is the first on a =
multi-processors machine. I compiled a new kernel ( un-commented both =
SMP options, config, make, make install ) but now it refuses to boot. If =
I boot with kernel.old it is ok ( dmesg ( boot -v ) and mptable at end =
of message). With the SMP-kernel, just after the line that says: =
"Waiting 15 seconds for SCSI devices to settle" I get the following =
lines:
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize();
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: =
0x0000001ff
and then the kernel deadlocks and I have to power-cycle it to try to =
boot again. ( ctrl-alt-del or ^D or ^C does nothing)
DMESG:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... TSC clock: 400948478 Hz, i8254 clock: 1193298 =
Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x652 Stepping =3D 2
=
Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory =3D 1073741824 (1048576K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004f7000 - 0x3fff7fff, 1068503040 bytes (260865 pages)
avail memory =3D 1040207872 (1015828K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0280
bios32: Entry =3D 0xf0210 (c00f0210) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0x0
pnpbios: Found PnP BIOS data at 0xc00f56f0
pnpbios: Entry =3D fa000:0 Rev =3D 1.0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel.old" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D71928086)
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x02
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[10]: type 1, range 32, base 00000000, size 28
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
subordinatebus=3D0 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel.old" at 0xc04d0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000384c
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D71928086)
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
found-> vendor=3D0x8086, dev=3D0x7192, revid=3D0x02
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[10]: type 1, range 32, base 00000000, size 28
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
subordinatebus=3D0 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Dd, irq=3D255
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[90]: type 1, range 32, base 00000800, size 4
found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
subordinatebus=3D1 secondarybus=3D1
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x02
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D10
map[10]: type 1, range 32, base 43500000, size 12
map[14]: type 1, range 32, base 0000ac00, size 5
map[18]: type 1, range 32, base 43200000, size 20
found-> vendor=3D0x1002, dev=3D0x5654, revid=3D0x40
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[10]: type 1, range 32, base 42000000, size 24
map[14]: type 1, range 32, base 0000a800, size 8
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0
atapci0: ATA channel disabled by BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device 7.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
chip1: <Intel 82371AB Power management controller> port 0x800-0x80f at =
device 7.
3 on pci0
pcib1: <DEC 21152 PCI-PCI bridge> at device 15.0 on pci0
found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D15
map[10]: type 1, range 32, base 00009400, size 8
map[14]: type 1, range 32, base 41100000, size 12
found-> vendor=3D0x9004, dev=3D0x8078, revid=3D0x01
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D15
map[10]: type 1, range 32, base 00009800, size 8
map[14]: type 1, range 32, base 41101000, size 12
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0x9400-0x94ff mem =
0x41100000-0x4
1100fff irq 15 at device 6.0 on pci1
ahc0: Reading SEEPROM...done.
ahc0: High byte termination Enabled
ahc0: Downloading Sequencer Program... 431 instructions downloaded
aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs
ahc1: <Adaptec aic7880 Ultra SCSI adapter> port 0x9800-0x98ff mem =
0x41101000-0x4
1101fff irq 15 at device 10.0 on pci1
ahc1: Reading SEEPROM...done.
ahc1: High byte termination Enabled
ahc1: Downloading Sequencer Program... 431 instructions downloaded
using shared irq15.
aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xac00-0xac1f mem =
0x43200000-0x432f
ffff,0x43500000-0x43500fff irq 10 at device 16.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:00:e2:20:56:55
fxp0: PCI IDs: 8086 1229 8086 0001 0002
fxp0: Dynamic Standby mode is disabled
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci0: <ATI Mach64-VT graphics accelerator> (vendor=3D0x1002, =
dev=3D0x5654) at 17.0
ex_isa_identify()
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xe0000-0xe47ff,0xe4800-0xe4fff on
isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0x0000
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0x0000
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:022afe3f 0..554=3D555 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors
1:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c040, tty 63109a, net 67149a
bpf: sl0 attached
bpf: faith0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:ahc0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:ahc0:0:5:0): Invalid field in CDB
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
ahc0: target 5 synchronous at 20.0MHz, offset =3D 0xf
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
(ahc0:A:0:0): Sending WDTR 1
(ahc0:A:0:0): Received WDTR 1 filtered to 1
ahc0: target 0 using 16bit transfers
(ahc0:A:0:0): Sending SDTR period c, offset 8
(ahc0:A:0:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 0 synchronous at 20.0MHz, offset =3D 0x8
(ahc0:A:1:0): Sending WDTR 1
(ahc0:A:1:0): Received WDTR 1 filtered to 1
ahc0: target 1 using 16bit transfers
(ahc0:A:1:0): Sending SDTR period c, offset 8
(ahc0:A:1:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x8
Creating DISK da0
Creating DISK da1
Creating DISK cd0
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device
pass0: Serial Number RD467983
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged =
Queueing Enable
d
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <IBM DDRS-39130W S97B> Fixed Direct Access SCSI-2 device
pass1: Serial Number REG08270
pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged =
Queueing Enable
d
pass2 at ahc0 bus 0 target 5 lun 0
pass2: <NEC CD-ROM DRIVE:465 1.03> Removable CD-ROM SCSI-2 device
pass2: 20.000MB/s transfers (20.000MHz, offset 15)
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
Mounting root from ufs:/dev/da0s1a
(ahc0:A:5:0): Sending SDTR period c, offset f
(ahc0:A:5:0): Received SDTR period c, offset f
Filtered to period c, offset f
(cd0:ahc0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahc0:0:5:0): NOT READY asc:3a,0
(cd0:ahc0:0:5:0): Medium not present
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:465 1.03> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DDRS-39130W S97B> Fixed Direct Access SCSI-2 device
da1: Serial Number REG08270
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing =
Enabled
da1: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2 device
da0: Serial Number RD467983
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing =
Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da0s1: type 0xa5, start 63, end =3D 8916074, size 8916012 : OK
start_init: trying /sbin/init
da1s1: type 0xa5, start 63, end =3D 17848214, size 17848152 : OK
da1s1: type 0xa5, start 63, end =3D 17848214, size 17848152 : OK
splash: image decoder found: logo_saver
Linux ELF exec handler installed
MPTABLE:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
MPTable, version 2.0.15
-------------------------------------------------------------------------=
------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f9e00
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0xe3
mode: Virtual Wire
-------------------------------------------------------------------------=
------
MP Config Table Header:
physical address: 0x000f9e10
signature: 'PCMP'
base table length: 276
version: 1.4
checksum: 0xfd
OEM ID: 'ACER '
Product ID: 'M9LD '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 26
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------=
------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step =
Flags
0 0x11 BSP, usable 6 5 2 =
0x183fbff
1 0x11 AP, usable 6 5 2 =
0x183fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID =
PIN#
INT active-hi edge 2 0 2 =
0
INT active-hi edge 2 1 2 =
1
INT active-hi edge 2 0 2 =
2
INT active-hi edge 2 3 2 =
3
INT active-hi edge 2 4 2 =
4
INT active-hi edge 2 5 2 =
5
INT active-hi edge 2 6 2 =
6
INT active-hi edge 2 7 2 =
7
INT active-hi edge 2 8 2 =
8
INT active-hi edge 2 9 2 =
9
INT active-hi level 2 10 2 =
10
INT active-hi edge 2 11 2 =
11
INT active-hi edge 2 12 2 =
12
INT active-hi edge 2 14 2 =
14
INT active-hi level 2 15 2 =
15
INT active-lo level 0 16:A 2 =
19
INT active-lo level 1 6:A 2 =
22
INT active-lo level 1 10:A 2 =
23
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID =
PIN#
ExtINT active-hi edge 2 0 255 =
0
NMI active-hi edge 2 0 255 =
1
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D
------=_NextPart_000_0007_01C232AC.48122E70
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2716.2200" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Hello everyone !</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2> I recently came across a acer =
altos 9100b,=20
dual PII-400 with 1G ram. I've decided to install FreeBSD 4.6 =
(ISO) on it=20
to be my main server. This is not my first FreeBSD install but it is the =
first=20
on a multi-processors machine. I compiled a new kernel ( un-commented =
both SMP=20
options, config, make, make install ) but now it refuses to boot. =
If I boot=20
with kernel.old it is ok ( dmesg ( boot -v ) and mptable at =
end of=20
message). With the SMP-kernel, just after the line that says: "Waiting =
15=20
seconds for SCSI devices to settle" I get the following =
lines:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>SMP: AP CPU #1 Launched!</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>SMP: CPU1 =
apic_initialize();</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> lint0: =
0x00010700 lint1:=20
0x00010400 TPR: 0x00000010 SVR: 0x0000001ff</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>and then the kernel deadlocks and I =
have to=20
power-cycle it to try to boot again. ( ctrl-alt-del or ^D =
or ^C does=20
nothing)</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2></FONT><FONT face=3DArial =
size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>DMESG:</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Copyright (c) 1992-2002 The FreeBSD=20
Project.<BR>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, =
1992, 1993,=20
1994<BR> The Regents of the =
University=20
of California. All rights reserved.<BR>FreeBSD 4.6-RELEASE #0: Tue Jun =
11=20
06:14:12 GMT 2002<BR> <A=20
href=3D"mailto:murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERI=
C">murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC</A><BR>Cal=
ibrating=20
clock(s) ... TSC clock: 400948478 Hz, i8254 clock: 1193298=20
Hz<BR>CLK_USE_I8254_CALIBRATION not specified - using default=20
frequency<BR>Timecounter "i8254" frequency 1193182=20
Hz<BR>CLK_USE_TSC_CALIBRATION not specified - using old calibration=20
method<BR>CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class=20
CPU)<BR> Origin =3D "GenuineIntel" Id =3D 0x652 =
Stepping =3D=20
2<BR> =20
Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR><BR>real=20
memory =3D 1073741824 (1048576K bytes)<BR>Physical memory=20
chunk(s):<BR>0x00001000 - 0x0009efff, 647168 bytes (158 =
pages)<BR>0x004f7000 -=20
0x3fff7fff, 1068503040 bytes (260865 pages)<BR>avail memory =3D =
1040207872=20
(1015828K bytes)<BR>bios32: Found BIOS32 Service Directory header at=20
0xc00f0280<BR>bios32: Entry =3D 0xf0210 (c00f0210) Rev =3D 0 =
Len =3D=20
1<BR>pcibios: PCI BIOS entry at 0x0<BR>pnpbios: Found PnP BIOS data at=20
0xc00f56f0<BR>pnpbios: Entry =3D fa000:0 Rev =3D 1.0<BR>Other BIOS =
signatures=20
found:<BR>ACPI: 00000000<BR>Preloaded elf kernel "kernel.old" at=20
0xc04d0000.<BR>Pentium Pro MTRR support enabled<BR>md0: Malloc =
disk<BR>Creating=20
DISK md0<BR>Math emulator present<BR>pci_open(1): mode =
1 addr=20
port (0x0cf8) is 0x8000384c<BR>pci_open(1a): =
mode1res=3D0x80000000=20
(0x80000000)<BR>pci_cfgcheck: device 0 [class=3D060000] =
[hdr=3D00] is=20
there (id=3D71928086)<BR>pcibios: No call entry point<BR>npx0: <math=20
processor> on motherboard<BR>npx0: INT 16 interface<BR>pcib0: =
<Intel=20
82443BX host to PCI bridge (AGP disabled)> on =
motherboard<BR>found->=20
vendor=3D0x8086, dev=3D0x7192,=20
revid=3D0x02<BR> =
class=3D06-00-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> map[10]: =
type 1,=20
range 32, base 00000000, size 28<BR>found-> vendor=3D0x8086, =
dev=3D0x7110,=20
revid=3D0x02<BR> =
class=3D06-01-00,=20
hdrtype=3D0x00, mfdev=3D1<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR>found-> vendor=3D0x8086, dev=3D0x7111,=20
revid=3D0x01<BR> =
class=3D01-01-80,=20
hdrtype=3D0x00, mfdev=3D0<BR>Other BIOS signatures found:<BR>ACPI:=20
00000000<BR>Preloaded elf kernel "kernel.old" at 0xc04d0000.<BR>Pentium =
Pro MTRR=20
support enabled<BR>md0: Malloc disk<BR>Creating DISK md0<BR>Math =
emulator=20
present<BR>pci_open(1): mode 1 addr port (0x0cf8) is=20
0x8000384c<BR>pci_open(1a): mode1res=3D0x80000000=20
(0x80000000)<BR>pci_cfgcheck: device 0 [class=3D060000] =
[hdr=3D00] is=20
there (id=3D71928086)<BR>pcibios: No call entry point<BR>npx0: <math=20
processor> on motherboard<BR>npx0: INT 16 interface<BR>pcib0: =
<Intel=20
82443BX host to PCI bridge (AGP disabled)> on =
motherboard<BR>found->=20
vendor=3D0x8086, dev=3D0x7192,=20
revid=3D0x02<BR> =
class=3D06-00-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> map[10]: =
type 1,=20
range 32, base 00000000, size 28<BR>found-> vendor=3D0x8086, =
dev=3D0x7110,=20
revid=3D0x02<BR> =
class=3D06-01-00,=20
hdrtype=3D0x00, mfdev=3D1<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR>found-> vendor=3D0x8086, dev=3D0x7111,=20
revid=3D0x01<BR> =
class=3D01-01-80,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR>found-> vendor=3D0x8086, dev=3D0x7112,=20
revid=3D0x01<BR> =
class=3D0c-03-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> =
intpin=3Dd,=20
irq=3D255<BR>found-> vendor=3D0x8086, dev=3D0x7113,=20
revid=3D0x02<BR> =
class=3D06-80-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> map[90]: =
type 1,=20
range 32, base 00000800, size 4<BR>found-> vendor=3D0x1011, =
dev=3D0x0024,=20
revid=3D0x03<BR> =
class=3D06-04-00,=20
hdrtype=3D0x01, mfdev=3D0<BR> =20
subordinatebus=3D1 =20
secondarybus=3D1<BR>found-> vendor=3D0x8086, dev=3D0x1229,=20
revid=3D0x02<BR> =
class=3D02-00-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> =
intpin=3Da,=20
irq=3D10<BR> map[10]: type 1, =
range 32,=20
base 43500000, size 12<BR> =
map[14]:=20
type 1, range 32, base 0000ac00, size =20
5<BR> map[18]: type 1, range =
32, base=20
43200000, size 20<BR>found-> vendor=3D0x1002, dev=3D0x5654,=20
revid=3D0x40<BR> =
class=3D03-00-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> map[10]: =
type 1,=20
range 32, base 42000000, size =
24<BR> =20
map[14]: type 1, range 32, base 0000a800, size 8<BR>pci0: <PCI =
bus>=20
on pcib0<BR>isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 =
on=20
pci0<BR>isa0: <ISA bus> on isab0<BR>atapci0: <Intel PIIX4 ATA33 =
controller> at device 7.1 on pci0<BR>atapci0: ATA channel disabled by =
BIOS<BR>uhci0: <Intel 82371AB/EB (PIIX4) USB controller> at device =
7.2 on=20
pci0<BR>uhci0: Could not map ports<BR>device_probe_and_attach: uhci0 =
attach=20
returned 6<BR>chip1: <Intel 82371AB Power management controller> =
port=20
0x800-0x80f at device 7.<BR>3 on pci0<BR>pcib1: <DEC 21152 PCI-PCI =
bridge>=20
at device 15.0 on pci0<BR>found-> vendor=3D0x9004, dev=3D0x8078,=20
revid=3D0x01<BR> =
class=3D01-00-00,=20
hdrtype=3D0x00, mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> =
intpin=3Da,=20
irq=3D15<BR> map[10]: type 1, =
range 32,=20
base 00009400, size =
8<BR> =20
map[14]: type 1, range 32, base 41100000, size 12<BR>found-> =
vendor=3D0x9004,=20
dev=3D0x8078, revid=3D0x01<BR> =
class=3D01-00-00, hdrtype=3D0x00,=20
mfdev=3D0<BR> =20
subordinatebus=3D0 =20
secondarybus=3D0<BR> =
intpin=3Da,=20
irq=3D15<BR> map[10]: type 1, =
range 32,=20
base 00009800, size =
8<BR> =20
map[14]: type 1, range 32, base 41101000, size 12<BR>pci1: <PCI =
bus> on=20
pcib1<BR>ahc0: <Adaptec aic7880 Ultra SCSI adapter> port =
0x9400-0x94ff mem=20
0x41100000-0x4<BR>1100fff irq 15 at device 6.0 on pci1<BR>ahc0: Reading=20
SEEPROM...done.<BR>ahc0: High byte termination Enabled<BR>ahc0: =
Downloading=20
Sequencer Program... 431 instructions downloaded<BR>aic7880: Ultra Wide =
Channel=20
A, SCSI Id=3D7, 16/253 SCBs<BR>ahc1: <Adaptec aic7880 Ultra SCSI =
adapter>=20
port 0x9800-0x98ff mem 0x41101000-0x4<BR>1101fff irq 15 at device 10.0 =
on=20
pci1<BR>ahc1: Reading SEEPROM...done.<BR>ahc1: High byte termination=20
Enabled<BR>ahc1: Downloading Sequencer Program... 431 instructions=20
downloaded<BR> using shared=20
irq15.<BR>aic7880: Ultra Wide Channel A, SCSI Id=3D7, 16/253 =
SCBs<BR>fxp0:=20
<Intel Pro 10/100B/100+ Ethernet> port 0xac00-0xac1f mem=20
0x43200000-0x432f<BR>ffff,0x43500000-0x43500fff irq 10 at device 16.0 on =
pci0<BR>fxp0: using memory space register mapping<BR>fxp0: Ethernet =
address=20
00:00:e2:20:56:55<BR>fxp0: PCI IDs: 8086 1229 8086 0001 0002<BR>fxp0: =
Dynamic=20
Standby mode is disabled<BR>nsphy0: <DP83840 10/100 media =
interface> on=20
miibus0<BR>nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
auto<BR>bpf: fxp0 attached<BR>pci0: <ATI Mach64-VT graphics =
accelerator>=20
(vendor=3D0x1002, dev=3D0x5654) at 17.0<BR>ex_isa_identify()<BR>Trying =
Read_Port at=20
203<BR>Trying Read_Port at 243<BR>Trying Read_Port at 283<BR>Trying =
Read_Port at=20
2c3<BR>Trying Read_Port at 303<BR>Trying Read_Port at 343<BR>Trying =
Read_Port at=20
383<BR>Trying Read_Port at 3c3<BR>isa_probe_children: disabling PnP=20
devices<BR>isa_probe_children: probing non-PnP devices<BR>orm0: =
<Option=20
ROMs> at iomem 0xc0000-0xc7fff,0xe0000-0xe47ff,0xe4800-0xe4fff=20
on<BR>isa0<BR>fdc0: <NEC 72065B or clone> at port =
0x3f0-0x3f5,0x3f7 irq 6=20
drq 2 on isa0<BR>fdc0: FIFO enabled, 8 bytes threshold<BR>fd0: =
<1440-KB 3.5"=20
drive> on fdc0 drive 0<BR>ata0: iobase=3D0x01f0 altiobase=3D0x03f6=20
bmaddr=3D0x0000<BR>ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on =
isa0<BR>ata1:=20
iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0x0000<BR>ata1 at port =
0x170-0x177,0x376=20
irq 15 on isa0<BR>adv0 failed to probe on isa0<BR>bt0: Failed Status Reg =
Test -=20
ff<BR>bt_isa_probe: Probe failed at 0x330<BR>bt0: Failed Status Reg Test =
-=20
ff<BR>bt_isa_probe: Probe failed at 0x334<BR>bt0: Failed Status Reg Test =
-=20
ff<BR>bt_isa_probe: Probe failed at 0x230<BR>bt0: Failed Status Reg Test =
-=20
ff<BR>bt_isa_probe: Probe failed at 0x234<BR>bt0: Failed Status Reg Test =
-=20
ff<BR>bt_isa_probe: Probe failed at 0x130<BR>bt0: Failed Status Reg Test =
-=20
ff<BR>bt_isa_probe: Probe failed at 0x134<BR>bt0 failed to probe at port =
0x134-0x137 on isa0<BR>aha0: status reg test failed ff<BR>aha0: status =
reg test=20
failed ff<BR>aha0: status reg test failed ff<BR>aha0: status reg test =
failed=20
ff<BR>aha0: status reg test failed ff<BR>aha0: status reg test failed =
ff<BR>aha0=20
failed to probe at port 0x134-0x137 on isa0<BR>aic0 failed to probe at =
port=20
0x140-0x15f on isa0<BR>atkbdc0: <Keyboard controller (i8042)> at =
port=20
0x60,0x64 on isa0<BR>atkbd0: <AT Keyboard> flags 0x1 irq 1 on=20
atkbdc0<BR>atkbd: the current kbd controller command byte 0065<BR>atkbd: =
keyboard ID 0x41ab (2)<BR>kbd0 at atkbd0<BR>kbd0: atkbd0, AT 101/102 =
(2),=20
config:0x1, flags:0x3d0000<BR>psm0: current command byte:0065<BR>psm0: =
<PS/2=20
Mouse> irq 12 on atkbdc0<BR>psm0: model IntelliMouse Explorer, device =
ID=20
4-00, 5 buttons<BR>psm0: config:00000000, flags:00000000, packet =
size:4<BR>psm0:=20
syncmask:08, syncbits:08<BR>vga0: <Generic ISA VGA> at port =
0x3c0-0x3df=20
iomem 0xa0000-0xbffff on isa0<BR>fb0: vga0, vga, type:VGA (5),=20
flags:0x7007f<BR>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 =
0x20000<BR>fb0:=20
init mode:24, bios mode:3, current mode:24<BR>fb0: window:0xc00b8000 =
size:32k=20
gran:32k, buf:0 size:32k<BR>VGA parameters upon power-up<BR>50 18 10 00 =
00 00 03=20
00 02 67 5f 4f 50 82 55 81<BR>bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 =
1f=20
96<BR>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c<BR>3d 3e 3f 0c 00 =
0f 08 00=20
00 00 00 00 10 0e 00 ff<BR>VGA parameters in BIOS for mode 24<BR>50 18 =
10 00 10=20
00 03 00 02 67 5f 4f 50 82 55 81<BR>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e =
8f 28 1f=20
96<BR>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c<BR>3d 3e 3f 0c 00 =
0f 08 00=20
00 00 00 00 10 0e 00 ff<BR>EGA/VGA parameters to be used for mode =
24<BR>50 18 10=20
00 10 00 03 00 02 67 5f 4f 50 82 55 81<BR>bf 1f 00 4f 0d 0e 00 00 00 00 =
9c 8e 8f=20
28 1f 96<BR>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c<BR>3d 3e 3f =
0c 00 0f=20
08 00 00 00 00 00 10 0e 00 ff<BR>sc0: <System console> at flags =
0x100 on=20
isa0<BR>sc0: VGA <16 virtual consoles, flags=3D0x300><BR>sc0: fb0, =
kbd0,=20
terminal emulator: sc (syscons terminal)<BR>pcic0 failed to probe at =
port 0x3e0=20
iomem 0xd0000 on isa0<BR>pcic1: not probed (disabled)<BR>sio0: irq maps: =
0x41=20
0x51 0x41 0x41<BR>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on =
isa0<BR>sio0:=20
type 16550A<BR>sio1: irq maps: 0x41 0x49 0x41 0x41<BR>sio1 at port =
0x2f8-0x2ff=20
irq 3 on isa0<BR>sio1: type 16550A<BR>sio2: not probed =
(disabled)<BR>sio3: not=20
probed (disabled)<BR>ppc0: parallel port found at 0x378<BR>ppc0: using =
extended=20
I/O port range<BR>ppc0: EPP SPP<BR>ppc0: <Parallel port> at port=20
0x378-0x37f irq 7 on isa0<BR>ppc0: Generic chipset (EPP/NIBBLE) in =
COMPATIBLE=20
mode<BR>plip0: <PLIP network interface> on ppbus0<BR>bpf: lp0=20
attached<BR>lpt0: <Printer> on ppbus0<BR>lpt0: Interrupt-driven=20
port<BR>ppi0: <Parallel I/O> on ppbus0<BR>ed0 failed to probe at =
port=20
0x280-0x29f iomem 0xd8000 irq 10 on isa0<BR>fe0 failed to probe at port=20
0x300-0x31f on isa0<BR>ie0 failed to probe at port 0x300 iomem 0xd0000 =
irq 10 on=20
isa0<BR>lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0<BR>cs0 =
failed to=20
probe at port 0x300-0x31f on isa0<BR>sn0 failed to probe at port =
0x300-0x30f irq=20
10 on isa0<BR>isa_probe_children: probing PnP devices<BR>BIOS=20
Geometries:<BR> 0:022afe3f 0..554=3D555 cylinders, 0..254=3D255 =
heads, 1..63=3D63=20
sectors<BR> 1:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 =
heads, 1..63=3D63=20
sectors<BR> 0 accounted for<BR>Device configuration =
finished.<BR>bpf: lo0=20
attached<BR>bpf: ppp0 attached<BR>new masks: bio 68c040, tty 63109a, net =
67149a<BR>bpf: sl0 attached<BR>bpf: faith0 attached<BR>Waiting 15 =
seconds for=20
SCSI devices to settle<BR>(noperiph:ahc0:0:-1:-1): SCSI bus reset =
delivered. 0=20
SCBs aborted.<BR>(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 =
SCBs=20
aborted.<BR>(probe5:ahc0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff=20
0<BR>(probe5:ahc0:0:5:0): ILLEGAL REQUEST =
asc:24,0<BR>(probe5:ahc0:0:5:0):=20
Invalid field in CDB<BR>(ahc0:A:5:0): Sending SDTR period c, offset=20
f<BR>(ahc0:A:5:0): Received SDTR period c, offset=20
f<BR> Filtered to period c, =
offset=20
f<BR>ahc0: target 5 synchronous at 20.0MHz, offset =3D =
0xf<BR>(ahc0:A:5:0):=20
Sending SDTR period c, offset f<BR>(ahc0:A:5:0): Received SDTR period c, =
offset=20
f<BR> Filtered to period c, =
offset=20
f<BR>(ahc0:A:0:0): Sending WDTR 1<BR>(ahc0:A:0:0): Received WDTR 1 =
filtered to=20
1<BR>ahc0: target 0 using 16bit transfers<BR>(ahc0:A:0:0): Sending SDTR =
period=20
c, offset 8<BR>(ahc0:A:0:0): Received SDTR period c, offset=20
8<BR> Filtered to period c, =
offset=20
8<BR>ahc0: target 0 synchronous at 20.0MHz, offset =3D =
0x8<BR>(ahc0:A:1:0):=20
Sending WDTR 1<BR>(ahc0:A:1:0): Received WDTR 1 filtered to 1<BR>ahc0: =
target 1=20
using 16bit transfers<BR>(ahc0:A:1:0): Sending SDTR period c, offset=20
8<BR>(ahc0:A:1:0): Received SDTR period c, offset=20
8<BR> Filtered to period c, =
offset=20
8<BR>ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x8<BR>Creating =
DISK=20
da0<BR>Creating DISK da1<BR>Creating DISK cd0<BR>pass0 at ahc0 bus 0 =
target 0=20
lun 0<BR>pass0: <IBM DDRS-34560W S97B> Fixed Direct Access SCSI-2=20
device<BR>pass0: Serial Number RD467983<BR>pass0: 40.000MB/s transfers=20
(20.000MHz, offset 8, 16bit), Tagged Queueing Enable<BR>d<BR>pass1 at =
ahc0 bus 0=20
target 1 lun 0<BR>pass1: <IBM DDRS-39130W S97B> Fixed Direct =
Access SCSI-2=20
device<BR>pass1: Serial Number REG08270<BR>pass1: 40.000MB/s transfers=20
(20.000MHz, offset 8, 16bit), Tagged Queueing Enable<BR>d<BR>pass2 at =
ahc0 bus 0=20
target 5 lun 0<BR>pass2: <NEC CD-ROM DRIVE:465 1.03> Removable =
CD-ROM=20
SCSI-2 device<BR>pass2: 20.000MB/s transfers (20.000MHz, offset=20
15)<BR>(ahc0:A:5:0): Sending SDTR period c, offset f<BR>(ahc0:A:5:0): =
Received=20
SDTR period c, offset f<BR> =
Filtered=20
to period c, offset f<BR>Mounting root from =
ufs:/dev/da0s1a<BR>(ahc0:A:5:0):=20
Sending SDTR period c, offset f<BR>(ahc0:A:5:0): Received SDTR period c, =
offset=20
f<BR> Filtered to period c, =
offset=20
f<BR>(cd0:ahc0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 =
0=20
0<BR>(cd0:ahc0:0:5:0): NOT READY asc:3a,0<BR>(cd0:ahc0:0:5:0): Medium =
not=20
present<BR>cd0 at ahc0 bus 0 target 5 lun 0<BR>cd0: <NEC CD-ROM =
DRIVE:465=20
1.03> Removable CD-ROM SCSI-2 device<BR>cd0: 20.000MB/s transfers =
(20.000MHz,=20
offset 15)<BR>cd0: Attempt to query device size failed: NOT READY, =
Medium not=20
present<BR>da1 at ahc0 bus 0 target 1 lun 0<BR>da1: <IBM DDRS-39130W =
S97B>=20
Fixed Direct Access SCSI-2 device<BR>da1: Serial Number REG08270<BR>da1: =
40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing=20
Enabled<BR>da1: 8715MB (17850000 512 byte sectors: 255H 63S/T =
1111C)<BR>da0 at=20
ahc0 bus 0 target 0 lun 0<BR>da0: <IBM DDRS-34560W S97B> Fixed =
Direct=20
Access SCSI-2 device<BR>da0: Serial Number RD467983<BR>da0: 40.000MB/s =
transfers=20
(20.000MHz, offset 8, 16bit), Tagged Queueing Enabled<BR>da0: 4357MB =
(8925000=20
512 byte sectors: 255H 63S/T 555C)<BR>da0s1: type 0xa5, start 63, end =
=3D 8916074,=20
size 8916012 : OK<BR>start_init: trying /sbin/init<BR>da1s1: type 0xa5, =
start=20
63, end =3D 17848214, size 17848152 : OK<BR>da1s1: type 0xa5, start 63, =
end =3D=20
17848214, size 17848152 : OK<BR>splash: image decoder found: =
logo_saver<BR>Linux=20
ELF exec handler installed<BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2>MPTABLE:</FONT></DIV><FONT face=3DArial =
size=3D2>
<DIV><BR>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D</DIV>
<DIV> </DIV>
<DIV>MPTable, version 2.0.15</DIV>
<DIV> </DIV>
<DIV>--------------------------------------------------------------------=
-----------</DIV>
<DIV> </DIV>
<DIV>MP Floating Pointer Structure:</DIV>
<DIV> </DIV>
<DIV> =20
location: &nbs=
p; =20
BIOS<BR> physical=20
address:  =
; =20
0x000f9e00<BR> =20
signature: &nb=
sp; =20
'_MP_'<BR> =20
length: =
=20
16 bytes<BR> =20
version:  =
; =20
1.4<BR> =20
checksum: &nbs=
p; =20
0xe3<BR> =20
mode: &n=
bsp; &nb=
sp;=20
Virtual Wire</DIV>
<DIV> </DIV>
<DIV>--------------------------------------------------------------------=
-----------</DIV>
<DIV> </DIV>
<DIV>MP Config Table Header:</DIV>
<DIV> </DIV>
<DIV> physical=20
address:  =
; =20
0x000f9e10<BR> =20
signature: &nb=
sp; =20
'PCMP'<BR> base table=20
length: =
=20
276<BR> =20
version:  =
; =20
1.4<BR> =20
checksum: &nbs=
p; =20
0xfd<BR> OEM=20
ID: &nbs=
p; =20
'ACER '<BR> Product=20
ID: &nbs=
p; =20
'M9LD '<BR> OEM table=20
pointer:  =
;=20
0x00000000<BR> OEM table=20
size: &n=
bsp; =20
0<BR> entry=20
count: &=
nbsp; =20
26<BR> local APIC=20
address: =20
0xfee00000<BR> extended table=20
length: 0<BR> extended =
table=20
checksum: 0</DIV>
<DIV> </DIV>
<DIV>--------------------------------------------------------------------=
-----------</DIV>
<DIV> </DIV>
<DIV>MP Config Base Table Entries:</DIV>
<DIV> </DIV>
<DIV>--<BR>Processors: APIC ID Version=20
State =
Family =20
Model Step =20
Flags<BR> &nbs=
p; =20
0 0x11 BSP,=20
usable 6 =20
5 =
2 =20
0x183fbff<BR> =
=20
1 0x11 AP,=20
usable =
6 =20
5 =
2 =20
0x183fbff<BR>--<BR>Bus: &n=
bsp; =20
Bus ID =20
Type<BR>  =
; =20
0 =20
PCI<BR> =
=20
1 =20
PCI<BR> =
=20
2 ISA<BR>--<BR>I/O=20
APICs: APIC ID Version=20
State =20
Address<BR> &n=
bsp; =20
2 0x11 =20
usable =20
0xfec00000<BR>--<BR>I/O Ints: =20
Type Polarity =20
Trigger Bus ID IRQ =
APIC ID=20
PIN#<BR>  =
; =20
INT =
active-hi =20
edge 2 =
0 =
2 =20
0<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
1 =
2 =20
1<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
0 =
2 =20
2<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
3 =
2 =20
3<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
4 =
2 =20
4<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
5 =
2 =20
5<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
6 =
2 =20
6<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
7 =
2 =20
7<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
8 =
2 =20
8<BR> &n=
bsp; =20
INT =
active-hi =20
edge 2 =
9 =
2 =20
9<BR> &n=
bsp; =20
INT =
active-hi =20
level 2 =20
10 2 =20
10<BR> &=
nbsp; =20
INT =
active-hi =20
edge 2 =20
11 2 =20
11<BR> &=
nbsp; =20
INT =
active-hi =20
edge 2 =20
12 2 =20
12<BR> &=
nbsp; =20
INT =
active-hi =20
edge 2 =20
14 2 =20
14<BR> &=
nbsp; =20
INT =
active-hi =20
level 2 =20
15 2 =20
15<BR> &=
nbsp; =20
INT =
active-lo =20
level 0 =20
16:A 2 =
19<BR> &=
nbsp; =20
INT =
active-lo =20
level 1 =20
6:A 2 =20
22<BR> &=
nbsp; =20
INT =
active-lo =20
level 1 =20
10:A 2 =
23<BR>--<BR>Local Ints: Type =20
Polarity Trigger Bus =
ID =20
IRQ APIC ID=20
PIN#<BR>  =
; =20
ExtINT active-hi =20
edge 2 =
0 255 =20
0<BR> &n=
bsp; =20
NMI =
active-hi =20
edge 2 =
0 255 =
1</DIV>
<DIV> </DIV>
<DIV>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D<BR></FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV></BODY></HTML>
------=_NextPart_000_0007_01C232AC.48122E70--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OE29prhup7IpGwC6RZT00004689>