Date: Mon, 21 Feb 2000 17:52:20 +0600 (NOVT) From: nnd@mail.nsk.ru To: current@freebsd.org Subject: Re: Abit BP6 Message-ID: <200002211152.RAA02053@wint.itfs.nsk.su> In-Reply-To: <20000221034017.A94363@best.xti.org>
next in thread | previous in thread | raw e-mail | index | archive | help
In <20000221034017.A94363@best.xti.org> Terje Elde <telde@online.no> wrote:
>
> Anyone have any information to contribute?
>
There is the 'dmesg' from the system based
on the Abit BP6 motherboard. As you can see the OS is very current.
(In fact I rebuild world on this system every morning iff
it is at all possible due to moon phase ;-)
N.Dudorov
P.S. Yes, I know about 'overclocking is considered harmfull" ;-(
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Mon Feb 21 12:39:02 NOVT 2000
nnd@wint.itfs.nsk.su:/arch/FreeBSD-current/src/sys/compile/WINTS
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (551.25-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268435456 (262144K bytes)
avail memory = 257400832 (251368K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 17 -> irq 5
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 10
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc02eb000.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc0296d42 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: NVidia Riva Ultra Vanta TNT2 graphics accelerator (vendor=0x10de, dev=0x002d) at 0.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: Intel 82371AB/EB (PIIX4) USB controller (vendor=0x8086, dev=0x7112) at 7.2
Timecounter "PIIX" frequency 3579545 Hz
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc400-0xc41f irq 5 at device 13.0 on pci0
ed0: address 00:00:01:01:05:9a, type NE2000 (16 bit)
pcm0: <AudioPCI ES1370> port 0xc800-0xc83f irq 10 at device 17.0 on pci0
atapci1: <HighPoint HPT366 ATA66 controller> port 0xd400-0xd4ff,0xd000-0xd003,0xcc00-0xcc07 irq 11 at device 19.0 on pci0
ata2: at 0xcc00 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 11 at device 19.1 on pci0
ata3: at 0xd800 on atapci2
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 12416MB <QUANTUM FIREBALL CR13.0A> [25228/16/63] at ata0-master using UDMA33
ad1: 12969MB <ST313640A> [26351/16/63] at ata1-master using UDMA33
ad2: 14664MB <IBM-DJNA-351520> [29795/16/63] at ata2-master using UDMA66
acd0: CD-RW <CR-4804TE> at ata3-master using PIO3
Mounting root from ufs:/dev/ad0s1a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200002211152.RAA02053>