From owner-freebsd-stable Fri Mar 10 9: 8:24 2000 Delivered-To: freebsd-stable@freebsd.org Received: from morpheus.skynet.be (morpheus.skynet.be [195.238.2.39]) by hub.freebsd.org (Postfix) with ESMTP id D7DD737BAF3; Fri, 10 Mar 2000 09:08:16 -0800 (PST) (envelope-from blk@skynet.be) Received: from [195.238.1.121] (brad.techos.skynet.be [195.238.1.121]) by morpheus.skynet.be (Postfix) with ESMTP id 7484FCBB8; Fri, 10 Mar 2000 18:08:06 +0100 (MET) Mime-Version: 1.0 X-Sender: blk@pop.skynet.be Message-Id: In-Reply-To: References: Date: Fri, 10 Mar 2000 18:07:57 +0100 To: FreeBSD-STABLE Mailing List From: Brad Knowles Subject: Re: Weirdest crash I ever saw... Cc: John Baldwin Content-Type: text/plain; charset="us-ascii" ; format="flowed" Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 1:58 PM +0100 2000/3/10, Brad Knowles wrote: > PL 0, pres 1, def32 1, gran 1 processor eflags = i > nterrupt enabled, resume, IOPL = 0 current process = 0 > (swapper) interrupt mask = n > et tty <- SMP: XXX trap number = 1 For those who are interested, at the bottom of this message is the output of dmesg on this machine, after a more verbose boot. Interestingly, when I cold booted the machine (hit the reset button), it came back up okay, so that I could make the necessary changes in /boot/defaults/loader.conf so that I could get this information, and then when I did another soft reboot (using `shutdown -r`), it came back up again okay as well. Also, although I've got DDB compiled into the kernel, it doesn't seem to be recognizing the serial cable I've got attached, which would allow me to cut-n-paste error messages. Is there anything more I need to do -- maybe remove the keyboard and reboot again? Anyway, it sure beats the hell out of me why this machine seriously flaked out a couple of boots ago. -Brad $ dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.4-STABLE #0: Fri Mar 10 13:34:36 CET 2000 root@audrey.skynet.be:/usr/src/sys/compile/AUDREY Calibrating clock(s) ... TSC clock: 448607251 Hz, i8254 clock: 1193146 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium III (686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff> real memory = 1073741824 (1048576K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002bd000 - 0x3ffdffff, 1070739456 bytes (261411 pages) avail memory = 1042726912 (1018288K bytes) Programming 24 pins in IOAPIC #0 SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Found BIOS32 Service Directory header at 0xc00ffe80 Entry = 0xffe90 (0xc00ffe90) Rev = 0 Len = 1 PCI BIOS entry at 0xc86e SMIBIOS header at 0xc00fac00 Version 2.2 Table at 0xfac20, 83 entries, 2776 bytes, largest entry 175 bytes DMI header at 0xc00fac10 Version 2.2 Table at 0xfac20, 83 entries, 2776 bytes Other BIOS signatures found: ACPI: 00000000 $PnP: 000fe2d0 Preloaded elf kernel "kernel" at 0xc02a5000. Pentium Pro MTRR support enabled Math emulator present SMP: CPU0 bsp_apic_configure(): lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) Probing for devices on PCI bus 0: found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 3, range 32, base f0000000, size 26 chip0: rev 0x03 on pci0.0.0 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 chip1: rev 0x03 on pci0.1.0 found-> vendor=0x1011, dev=0x0024, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 chip2: rev 0x03 on pci0.2.0 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 chip3: rev 0x02 on pci0.7.0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 4, range 32, base 0000ffa0, size 4 ide_pci0: rev 0x01 on pci0.7.1 intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4 intel_piix_status: primary master fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled intel_piix_status: primary master/slave sample = 5, master/slave recovery = 4 intel_piix_status: primary slave fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled ide_pci: busmaster 0 status: 04 from port: 0000ffa2 intel_piix_status: secondary master/slave sample = 3, master/slave recovery = 1 intel_piix_status: secondary master fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling enabled, intel_piix_status: fast PIO enabled intel_piix_status: secondary master/slave sample = 3, master/slave recovery = 1 intel_piix_status: secondary slave fastDMAonly disabled, pre/post disabled, intel_piix_status: IORDY sampling disabled, intel_piix_status: fast PIO disabled ide_pci: busmaster 1 status: 24 from port: 0000ffaa ide_pci: ide1:0 has been configured for DMA by BIOS Freeing (NOT implemented) redirected PCI irq 14. found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=19 map[0]: type 4, range 32, base 0000cce0, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 chip4: rev 0x02 on pci0.7.3 Freeing (NOT implemented) redirected PCI irq 14. found-> vendor=0x8086, dev=0x1229, revid=0x05 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=19 map[0]: type 3, range 32, base f7000000, size 12 map[1]: type 4, range 32, base 0000ccc0, size 5 map[2]: type 1, range 32, base fe000000, size 20 fxp0: rev 0x05 int a irq 19 on pci0.16.0 fxp0: Ethernet address 00:90:27:99:13:1a bpf: fxp0 attached Probing for devices on PCI bus 1: found-> vendor=0x1002, dev=0x4757, revid=0x7a class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[0]: type 1, range 32, base fc000000, size 24 map[1]: type 4, range 32, base 0000ec00, size 8 map[2]: type 1, range 32, base fbfff000, size 12 vga0: rev 0x7a on pci1.0.0 Probing for devices on PCI bus 2: Freeing (NOT implemented) redirected PCI irq 11. found-> vendor=0x9005, dev=0x0010, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=21 map[0]: type 4, range 32, base 0000dc00, size 8 map[1]: type 1, range 64, base f9fff000, size 12 map[2]: type 0, range 0, base 00000000, size 0 ahc0: rev 0x00 int a irq 21 on pci2.9.0 ahc0: Reading SEEPROM...done. ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc0: Downloading Sequencer Program... 399 instructions downloaded Freeing (NOT implemented) redirected PCI irq 10. found-> vendor=0x9005, dev=0x0010, revid=0x00 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=22 map[0]: type 4, range 32, base 0000d800, size 8 map[1]: type 1, range 64, base f9ffe000, size 12 map[2]: type 0, range 0, base 00000000, size 0 ahc1: rev 0x00 int a irq 22 on pci2.10.0 ahc1: Reading SEEPROM...done. ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: Downloading Sequencer Program... 399 instructions downloaded Freeing (NOT implemented) redirected PCI irq 14. found-> vendor=0x9005, dev=0x001f, revid=0x01 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[0]: type 4, range 32, base 0000d400, size 8 map[1]: type 1, range 64, base f9ffd000, size 12 map[2]: type 0, range 0, base 00000000, size 0 ahc2: rev 0x01 int a irq 16 on pci2.11.0 ahc2: Reading SEEPROM...done. ahc2: Manual LVD Termination ahc2: BIOS eeprom is present ahc2: Secondary High byte termination Enabled ahc2: Secondary Low byte termination Enabled ahc2: Primary Low Byte termination Enabled ahc2: Primary High Byte termination Enabled ahc2: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc2: Downloading Sequencer Program... 399 instructions downloaded Probing for devices on the ISA bus: atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa sc0 on isa sc0: fb0 kbd0 sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. psm0 not found sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 not found at 0x1f0 scd0 not found at 0x230 ppc: parallel port found at 0x378 ppc: chipset forced to generic ppc0: ECP SPP ECP+EPP SPP ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0x0 size:0k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff npx0 on motherboard npx0: INT 16 interface imasks: bio c8000040, tty c708009a, net c708009a SMP: enabled INTs: 1, 3, 4, 6, 7, 16, 19, 21, 22, apic_imen: 0x0096ff25 BIOS Geometries: 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 bpf: sl0 attached bpf: lo0 attached IP Filter: initialized. Default = pass all, Logging = enabled Waiting 5 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc2:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. SMP: AP CPU #1 Launched! SMP: CPU1 apic_initialize(): lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff ahc2: target 0 using 16bit transfers ahc2: target 0 synchronous at 40.0MHz, offset = 0x1f pass0 at ahc2 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number 369916232413 pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0 at ahc2 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number 369916232413 da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8683MB (17783249 512 byte sectors: 255H 63S/T 1106C) Considering MFS root f/s. No MFS image available as root f/s. Considering FFS root f/s. changing root device to da0s2a da0s1: type 0x6, start 63, end = 32129, size 32067 : OK da0s2: type 0xa5, start 32130, end = 17767889, size 17735760 : OK start_init: trying /sbin/init -- These are my opinions and should not be taken as official Skynet policy ========================================================================= Brad Knowles, Sys. Arch., Mail/News/FTP/Proxy Admin Note: No Microsoft programs were used in the creation or distribution of this message. If you are using a Microsoft program to view this message, be forewarned that I am not responsible for any harm you may encounter as a result. See for details. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message