Date: Fri, 10 Aug 2001 12:43:41 +0800 From: francisv@dagupan.com To: freebsd-net@freebsd.org Subject: PPPoE server setup + RADIUS Message-ID: <10F29E27A956D511B0940050DA8D86A908F755@chat.dagupan.com>
next in thread | raw e-mail | index | archive | help
Hi all, We're currently experimenting with PPPoE on a FreeBSD 4.3-STABLE system with a Windows 98 client using RASPPPOE. I've found some instructions on the web on how to setup the PPPoE server and so far I've managed to make it run. We are using the RADIUS server of our upstream ISP for authenticating clients. Here's a copy of my /etc/ppp/ppp.conf: pppoe-in: allow users enable pap allow mode direct set mru 1460 set mtu 1460 set speed sync enable lqr accept dns set ifaddr 202.91.163.1 202.91.163.20-202.91.163.50 set dns 202.91.161.130 202.47.132.1 load server set radius /etc/ppp/radius.conf set log phase ipcp lcp debug Their RADIUS server sends a reply for Framed-IP-Address: 255.255.255.254 and Framed-IP-Netmask: 255.255.255.0 But upon inspection of the client, it shows that it got the 255.255.255.254 address instead of the IP address pool as defined in ppp.conf. What else could be wrong here? Where should I look? Thanks! --- francis vidal [bitstop network services] streaming media + web services v(02)330-2872,(02)330-2873 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-net" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?10F29E27A956D511B0940050DA8D86A908F755>