Date: Fri, 12 Nov 2004 10:27:54 +0100 From: Volker Lieder <vl@plusline.de> To: freebsd-questions@freebsd.org Subject: strange dmesg-output on FreeBSD 5.3 Message-ID: <21FF4E38-348D-11D9-ABF4-000D933AB0EA@plusline.de>
next in thread | raw e-mail | index | archive | help
Hello list,
if have installed 5.3 and after rebooting i have a strange dmesg-output.
Perhaps its nothing to worry about, but perhaps you can have a look on
it:
##############
Waiting 15 seconds for SCSI devices to settle
aacd0: <RAID 5> on aac0
aacd0: 139995MB (286709760 sectors)
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
ahd0: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x31 Mode 0x33
INTSTAT[0x0] SELOID[0x8] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x18]:(P_DATAOUT|SELI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x80] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x40]:(ENSELO) SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff] SSTAT0[0x10]:(SELINGO) SSTAT1[0x0]
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 8 LASTSCB 0xffff CURRSCB 0x8 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
8 ( 0x8 )
9 ( 0x7 )
10 ( 0x6 )
11 ( 0x5 )
12 ( 0x4 )
13 ( 0x3 )
14 ( 0x2 )
15 ( 0x1 )
Pending list:
1 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xf7]:(TID)
2 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xe7]
3 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xd7]
4 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xc7]
5 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xb7]
6 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xa7]
7 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x97]
8 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x87]
Total 8
Kernel Free SCB list: 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:
(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:
(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd0: REG0 == 0xa185, SINDEX = 0x120, DINDEX = 0x120
ahd0: SCBPTR == 0x8, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x7
CDB 12 0 0 0 24 0
STACK: 0x23 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe29:ahd0:0:15:0): SCB 0x1 - timed out
(probe29:ahd0:0:15:0): Other SCB Timeout
(probe29:ahd0:0:15:0): No other SCB worth waiting for...
ahd0: Issued Channel A Bus Reset. 8 SCBs aborted
ahd1: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd1: Dumping Card State at program address 0x36 Mode 0x33
INTSTAT[0x0] SELOID[0x8] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x0]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x18]:(P_DATAOUT|SELI|ATNI) SCSIPHASE[0x0]
SCSIBUS[0x80] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x40]:(ENSELO) SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
QFREEZE_COUNT[0x0] KERNEL_QFREEZE_COUNT[0x0] MK_MESSAGE_SCB[0xff00]
MK_MESSAGE_SCSIID[0xff] SSTAT0[0x10]:(SELINGO) SSTAT1[0x0]
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0]
LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 8 LASTSCB 0xffff CURRSCB 0x8 NEXTSCB 0x0
qinstart = 15 qinfifonext = 15
QINFIFO:
WAITING_TID_QUEUES:
8 ( 0x8 )
9 ( 0x7 )
10 ( 0x6 )
11 ( 0x5 )
12 ( 0x4 )
13 ( 0x3 )
14 ( 0x2 )
15 ( 0x1 )
Pending list:
1 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xf7]:(TID)
2 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xe7]
3 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xd7]
4 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xc7]
5 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xb7]
6 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0xa7]
7 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x97]
8 FIFO_USE[0x0] SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x87]
Total 8
Kernel Free SCB list: 9 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:
(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd1: FIFO1 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f]:
(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
ahd1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
ahd1: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd1: REG0 == 0x3cd9, SINDEX = 0x120, DINDEX = 0x120
ahd1: SCBPTR == 0x8, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x7
CDB 12 0 0 0 24 0
STACK: 0x22 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(probe44:ahd1:0:15:0): SCB 0x1 - timed out
(probe44:ahd1:0:15:0): Other SCB Timeout
(probe44:ahd1:0:15:0): No other SCB worth waiting for...
ahd1: Issued Channel A Bus Reset. 8 SCBs aborted
ses0 at aacp0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed unknown SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
#########################
Thanks,
Volker
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?21FF4E38-348D-11D9-ABF4-000D933AB0EA>