Date: Fri, 1 Apr 2005 08:01:43 -0600 (CST) From: Amit Kumar Saha <amsaha@cs.rice.edu> To: freebsd-questions@freebsd.org Subject: Re: Sound on Dell Dimension 8300 (FreeBSD 5.1-RELEASE) Message-ID: <Pine.GSO.4.58.0504010754490.942@frosty.cs.rice.edu> In-Reply-To: <200503301238.28958.kellers@njit.edu> References: <Pine.GSO.4.58.0503301128400.14822@frosty.cs.rice.edu> <200503301238.28958.kellers@njit.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
When I do kldload snd_ich.ko I get an error message: kldload: can't load snd_ich.ko: File exists On doing kldstat -v I can see that the kernel module contains: pcm/snd_ich. I think, during bootup the OS cannot associate the particular sound card (which is built into the motherboard) with the necessary device driver. Thanks, amit ---------------------------------------------------------------------- http://www.cs.rice.edu/~amsaha ---------------------------------------------------------------------- The world is coming to an end ... SAVE YOUR BUFFERS!!! ---------------------------------------------------------------------- On Wed, 30 Mar 2005, Tim Kellers wrote: > If you have a file named snd_ich.ko in /boot/kernel/: > Try (as root) > > #kldload snd_ich.ko > > and see if your sound begins to work > > (you can check the status of loaded modules with the command kldstat(8)) > > > On Wednesday 30 March 2005 12:30 pm, Amit Kumar Saha wrote: > > Hi, > > I am trying to enable the builtin sound card present in Dell > > Dimension 8300 but cant seem to get it done. As far as I remember, in > > FreeBSD 5.3 it can be done simply by having the following two options in > > the kernel config file: > > > > device sound > > device snd_ich > > > > However, FreeBSD 5.1 does not recognize any of these even (Even man sound > > or man snd_ich does not work even though it should work on any FreeBSD 5.* > > So I guess I have to give some hardware hints in order to > > > > config MYCONFIG gives the following error report: > > ================================================= > > > > config: Error: device "sound" is unknown > > config: Error: device "snd_ich" is unknown > > > > (/boot/kernel/ however has the files snd_ich.ko as well as snd_pcm.ko) > > > > The output of cat /dev/sndstat is as follows: > > ============================================= > > > > FreeBSD Audio Driver (newpcm) > > Installed devices: > > > > The 'seems to be relevant part of dmesg' is here: > > ================================================= > > pci0: <multimedia, audio> at device 31.5 (no driver attached) > > > > The entire dmesg output is as follows: > > ================================ > > > > <== START OF dmesg output > > > > Copyright (c) 1992-2003 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 5.1-RELEASE #3: Tue Oct 14 18:17:28 CDT 2003 > > root@monarch_amsaha.rice.edu:/usr/src/sys/i386/compile/NEW > > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0700000. > > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0700294. > > Timecounter "i8254" frequency 1193182 Hz > > Timecounter "TSC" frequency 3192009524 Hz > > CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.01-MHz 686-class CPU) > > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC > >A,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Hyperthreading: 2 logical CPUs > > real memory = 1073168384 (1023 MB) > > avail memory = 1035091968 (987 MB) > > Pentium Pro MTRR support enabled > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > acpi0: <DELL 8300 > on motherboard > > pcibios: BIOS version 2.10 > > Using $PIR table, 8 entries at 0xc00feae0 > > acpi0: power button is handled as a fixed feature programming model. > > Timecounter "ACPI-fast" frequency 3579545 Hz > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > > acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 > > acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 > > acpi_button0: <Power Button> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at > > device 0.0 on pci0 pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 > > pci1: <PCI bus> on pcib1 > > pci1: <display, VGA> at device 0.0 (no driver attached) > > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq > > 11 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> > > on uhci0 > > usb0: USB revision 1.0 > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub0: 2 ports with 2 removable, self powered > > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq > > 10 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> > > on uhci1 > > usb1: USB revision 1.0 > > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub1: 2 ports with 2 removable, self powered > > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 9 > > at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on > > uhci2 > > usb2: USB revision 1.0 > > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub2: 2 ports with 2 removable, self powered > > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq > > 11 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> > > on uhci3 > > usb3: USB revision 1.0 > > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > > uhub3: 2 ports with 2 removable, self powered > > pci0: <serial bus, USB> at device 29.7 (no driver attached) > > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > > pci2: <ACPI PCI bus> on pcib2 > > fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xdf40-0xdf7f mem > > 0xfcfff000-0xfcffffff irq 10 at device 8.0 on pci2 fxp0: Ethernet address > > 00:07:e9:5f:67:fd > > miibus0: <MII bus> on fxp0 > > inphy0: <i82562ET 10/100 media interface> on miibus0 > > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > > isa0: <ISA bus> on isab0 > > atapci0: <Intel ICH5 UDMA100 controller> port > > 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem > > 0xfebffc00-0xfebfffff irq 9 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on > > atapci0 > > ata1: at 0x170 irq 15 on atapci0 > > atapci1: <Intel ICH5 SATA150 controller> port > > 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 9 > > at device 31.2 on pci0 ata2: at 0xfe00 on atapci1 > > ata3: at 0xfe20 on atapci1 > > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > > pci0: <multimedia, audio> at device 31.5 (no driver attached) > > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes > > threshold > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > > kbd0 at atkbd0 > > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > > psm0: model IntelliMouse, device ID 3 > > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > > sio0: type 16550A > > ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > > ppc0: FIFO with 16/16/8 bytes threshold > > ppbus0: <Parallel port bus> on ppc0 > > plip0: <PLIP network interface> on ppbus0 > > lpt0: <Printer> on ppbus0 > > lpt0: Interrupt-driven port > > ppi0: <Parallel I/O> on ppbus0 > > orm0: <Option ROMs> at iomem 0xd1000-0xd3fff,0xc0000-0xcf7ff on isa0 > > pmtimer0 on isa0 > > sc0: <System console> at flags 0x100 on isa0 > > sc0: VGA <16 virtual consoles, flags=0x300> > > sio1: configured irq 3 not in bitmap of probed irqs 0 > > sio1: port may not be enabled > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > > RTC BIOS diagnostic error 18<memory_size,fixed_disk> > > Timecounters tick every 10.000 msec > > ad4: 238418MB <WDC WD2500JD-75FYB0> [484406/16/63] at ata2-master UDMA100 > > acd0: CDROM <Lite-On LTN486S 48x Max> at ata1-master PIO4 > > Mounting root from ufs:/dev/ad4s3a > > > > > > <=== END OF dmesg output > > > > Thanks, > > Amit > > > > ---------------------------------------------------------------------- > > http://www.cs.rice.edu/~amsaha > > ---------------------------------------------------------------------- > > The world is coming to an end ... SAVE YOUR BUFFERS!!! > > ---------------------------------------------------------------------- > > _______________________________________________ > > freebsd-questions@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > > To unsubscribe, send any mail to > > "freebsd-questions-unsubscribe@freebsd.org" > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.58.0504010754490.942>