Date: Sun, 15 Jul 2012 15:47:19 GMT From: Larry Gadallah <lgadallah@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/169888: 9.0 i386 will not install on a Dell Dimension E510 Message-ID: <201207151547.q6FFlJu8078440@red.freebsd.org> Resent-Message-ID: <201207151550.q6FFoBOP024369@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 169888
>Category: misc
>Synopsis: 9.0 i386 will not install on a Dell Dimension E510
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Sun Jul 15 15:50:11 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator: Larry Gadallah
>Release: 9.0 RELEASE
>Organization:
Amateur Radio VE6VQ
>Environment:
FreeBSD 9.0-RELEASE FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>Description:
After several attempts, including disabling ACPI, twiddling BIOS settings, etc. I am unable to install 9.0 on my Dell Dimension E510, which has in the past run FreeBSD, OpenBSD, Windows, and several flavors of Linux. Booting the same system with a FreeBSD 8.2 install CD yields the expected SATA drives.
The problem seems to be that none of the SATA disks are detected, despite the controller being enumerated, and hence there is nowhere to install FreeBSD (see attached dmesg output, from verbose boot with ACPI disabled).
>How-To-Repeat:
- Boot the system using the FreeBSD 9.0 i386 install CD.
- Enter the shell
- Issue the dmesg command and look for SATA drives detected in the output
>Fix:
Patch attached with submission follows:
MP Configuration Table version 1.4 found at 0xc00f0000
APIC: Using the MPTable enumerator.
SMP: Added CPU 0 (BSP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:15:25 UTC 2012
root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Preloaded elf kernel "/boot/kernel/kernel" at 0xc12a0000.
Calibrating TSC clock ... TSC clock: 2992567387 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Family = f Model = 4 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD Features=0x20100000<NX,LM>
TSC: P-state invariant
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 16 KB, 8-way set associative, sectored cache, 64 byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 2-MB, 8-way set associative, 64-byte line size
L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line
real memory = 4294967296 (4096 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001426000 - 0x00000000cc39afff, 3405205504 bytes (831349 pages)
avail memory = 3403509760 (3245 MB)
MPTable: <DELL Dell DM051 >
Event timer "LAPIC" quality 400
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb93c
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu 0
ioapic0: Changing APIC ID to 8
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 3 trigger: level
ioapic0: intpin 4 trigger: level
ioapic0: intpin 5 trigger: level
ioapic0: intpin 9 trigger: level
ioapic0: intpin 10 trigger: level
ioapic0: intpin 11 trigger: level
lapic: Routing ExtINT -> LINT0
lapic: LINT0 trigger: edge
lapic: LINT0 polarity: high
lapic: Routing NMI -> LINT1
lapic: LINT1 trigger: edge
lapic: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
null: <null device, zero device>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27708086)
pcibios: BIOS version 2.10
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2770, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2771, revid=0x02
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 1 INTA routed to irq 16
found-> vendor=0x8086, dev=0x27d8, revid=0x01
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xefffc000, size 14, enabled
pcib0: slot 27 INTA routed to irq 16
found-> vendor=0x8086, dev=0x27d0, revid=0x01
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: slot 28 INTA routed to irq 16
found-> vendor=0x8086, dev=0x27c8, revid=0x01
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled
pcib0: slot 29 INTA routed to irq 21
found-> vendor=0x8086, dev=0x27c9, revid=0x01
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled
pcib0: slot 29 INTB routed to irq 22
found-> vendor=0x8086, dev=0x27ca, revid=0x01
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled
pcib0: slot 29 INTC routed to irq 18
found-> vendor=0x8086, dev=0x27cb, revid=0x01
domain=0, bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=4
map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled
pcib0: slot 29 INTD routed to irq 23
found-> vendor=0x8086, dev=0x27cc, revid=0x01
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xffa80800, size 10, enabled
pcib0: slot 29 INTA routed to irq 21
ehci early: SMM active, request owner change
found-> vendor=0x8086, dev=0x244e, revid=0xe1
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b8, revid=0x01
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27df, revid=0x01
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
pcib0: slot 31 INTA routed to irq 16
found-> vendor=0x8086, dev=0x27c0, revid=0x01
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled
map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled
map[20]: type I/O Port, range 32, base 0xfea0, size 4, enabled
map[24]: type Memory, range 32, base 0, size 10, enabled
pcib0: slot 31 INTC routed to irq 20
found-> vendor=0x8086, dev=0x27da, revid=0x01
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled
pcib0: slot 31 INTB routed to irq 17
pcib1: <MPTable PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xd000-0xdfff
pcib1: memory decode 0xed000000-0xefefffff
pcib1: prefetched decode 0xd0000000-0xdfffffff
pci1: <PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x10de, dev=0x0392, revid=0xa1
domain=0, bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xed000000, size 24, enabled
pcib1: allocated memory range (0xed000000-0xedffffff) for rid 10 of pci0:1:0:0
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
pcib1: allocated prefetch range (0xd0000000-0xdfffffff) for rid 14 of pci0:1:0:0
map[1c]: type Memory, range 64, base 0xee000000, size 24, enabled
pcib1: allocated memory range (0xee000000-0xeeffffff) for rid 1c of pci0:1:0:0
map[24]: type I/O Port, range 32, base 0xdc80, size 7, enabled
pcib1: allocated I/O port range (0xdc80-0xdcff) for rid 24 of pci0:1:0:0
pcib1: slot 0 INTA routed to irq 16
vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem 0xed000000-0xedffffff,0xd0000000-0xdfffffff,0xee000000-0xeeffffff irq 16 at device 0.0 on pci1
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xefffc000-0xefffffff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 48
hdac0: using IRQ 256 for MSI
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
pcib2: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: memory decode 0xecf00000-0xecffffff
pcib2: no prefetched decode
pci2: <PCI bus> on pcib2
pci2: domain=0, physical bus=2
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 49
uhci0: LegSup = 0x0020
usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1
usbus1: bpf attached
uhci1: usbpf: Attached
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 51
usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2
usbus2: bpf attached
uhci2: usbpf: Attached
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 52
usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3
usbus3: bpf attached
uhci3: usbpf: Attached
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usbus4: bpf attached
ehci0: usbpf: Attached
pcib3: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xece00000-0xecefffff
pcib3: no prefetched decode
pcib3: Subtractively decoded bridge.
pci3: <PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x1102, dev=0x0002, revid=0x05
domain=0, bus=3, slot=2, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=5
powerspec 1 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xcca0, size 5, enabled
pcib3: allocated I/O port range (0xcca0-0xccbf) for rid 10 of pci0:3:2:0
pcib3: slot 2 INTA routed to irq 18
found-> vendor=0x1102, dev=0x7002, revid=0x05
domain=0, bus=3, slot=2, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0105, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0xcc90, size 3, enabled
pcib3: allocated I/O port range (0xcc90-0xcc97) for rid 10 of pci0:3:2:1
found-> vendor=0x14f1, dev=0x2f20, revid=0x00
domain=0, bus=3, slot=3, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xecef0000, size 16, enabled
pcib3: allocated memory range (0xecef0000-0xecefffff) for rid 10 of pci0:3:3:0
map[14]: type I/O Port, range 32, base 0xcc98, size 3, enabled
pcib3: allocated I/O port range (0xcc98-0xcc9f) for rid 14 of pci0:3:3:0
pcib3: slot 3 INTA routed to irq 19
found-> vendor=0x8086, dev=0x27dc, revid=0x01
domain=0, bus=3, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xeceef000, size 12, enabled
pcib3: allocated memory range (0xeceef000-0xeceeffff) for rid 10 of pci0:3:8:0
map[14]: type I/O Port, range 32, base 0xccc0, size 6, enabled
pcib3: allocated I/O port range (0xccc0-0xccff) for rid 14 of pci0:3:8:0
pcib3: slot 8 INTA routed to irq 20
pci3: <multimedia, audio> at device 2.0 (no driver attached)
pci3: <input device> at device 2.1 (no driver attached)
pci3: <simple comms> at device 3.0 (no driver attached)
fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0xccc0-0xccff mem 0xeceef000-0xeceeffff irq 20 at device 8.0 on pci3
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 27dc 1028 01ab 0001
fxp0: Dynamic Standby mode is enabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0: OUI 0x005500, model 0x0033, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: bpf attached
fxp0: Ethernet address: 00:12:3f:b4:19:ee
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 53
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
atapci1: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0
atapci1: Lazy allocation of 0x400 bytes rid 0x24 type 3 at 0xcfe88c00
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
est0: enabling SpeedStep
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2d00000f2d
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ex_isa_identify()
pnpbios: 27 devices, largest 106 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0x100000-0x7e0fffff, size=0x7e000000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffffffff, size=0x500000
PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
PNP0c01: adding io range 0x800-0x8df, size=0xe0, align=0x1
PNP0c01: adding io range 0xc00-0xc7f, size=0x80, align=0x1
PNP0c01: adding io range 0x62-0x63, size=0x2, align=0x1
PNP0c01: adding io range 0x65-0x6f, size=0xb, align=0x1
PNP0c01: adding io range 0xe0-0xef, size=0x10, align=0x1
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 4 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xfed20000-0xfed9ffff, size=0x80000
pnpbios: handle 7 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xfeda0000-0xfedacfff, size=0xd000
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xf0000000-0xf3ffffff, size=0x4000000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0103: adding fixed memory32 range 0xfed00000-0xfed003ff, size=0x400
pnpbios: handle 10 device ID PNP0103 (0301d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1
pnpbios: handle 11 device ID PNP0100 (0001d041)
PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1
PNP0200: adding io range 0-0x1f, size=0x20, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 12 device ID PNP0200 (0002d041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 13 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 14 device ID PNP0800 (0008d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1
pnpbios: handle 15 device ID PNP0b00 (000bd041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 16 device ID PNP0c04 (040cd041)
PNP0c02: adding fixed memory32 range 0xcfe88c00-0xcfffffff, size=0x177400
pnpbios: handle 17 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x100-0x1fe, size=0xff, align=0x10
PNP0c02: adding io range 0x200-0x277, size=0x78, align=0x10
PNP0c02: adding io range 0x280-0x2e7, size=0x68, align=0x10
PNP0c02: adding io range 0x2e8-0x2ef, size=0x8, align=0x8
PNP0c02: adding io range 0x2f0-0x2f7, size=0x8, align=0x10
PNP0c02: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
PNP0c02: adding io range 0x300-0x377, size=0x78, align=0x10
PNP0c02: adding io range 0x380-0x3bb, size=0x3c, align=0x10
pnpbios: handle 18 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x3c0-0x3e7, size=0x28, align=0x10
PNP0c02: adding io range 0x3f6-0x3f7, size=0x2, align=0x1
PNP0c02: adding io range 0x400-0x4cf, size=0xd0, align=0x10
PNP0c02: adding io range 0x4d2-0x57f, size=0xae, align=0x1
PNP0c02: adding io range 0x580-0x677, size=0xf8, align=0x10
PNP0c02: adding io range 0x680-0x777, size=0xf8, align=0x10
PNP0c02: adding io range 0x780-0x7bb, size=0x3c, align=0x10
PNP0c02: adding io range 0x7c0-0x7ff, size=0x40, align=0x10
pnpbios: handle 19 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x8e0-0x8ff, size=0x20, align=0x10
PNP0c02: adding io range 0x900-0x9fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa00-0xafe, size=0xff, align=0x10
PNP0c02: adding io range 0xb00-0xbfe, size=0xff, align=0x10
PNP0c02: adding io range 0xc80-0xcaf, size=0x30, align=0x10
PNP0c02: adding io range 0xcb0-0xcbf, size=0x10, align=0x10
PNP0c02: adding io range 0xcc0-0xcf7, size=0x38, align=0x10
PNP0c02: adding io range 0xd00-0xdfe, size=0xff, align=0x10
pnpbios: handle 20 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xe00-0xefe, size=0xff, align=0x10
PNP0c02: adding io range 0xf00-0xffe, size=0xff, align=0x10
pnpbios: handle 21 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x2000-0x20fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2100-0x21fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2200-0x22fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2300-0x23fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2400-0x24fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2500-0x25fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2600-0x26fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2700-0x27fe, size=0xff, align=0x10
pnpbios: handle 22 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x2800-0x28fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2900-0x29fe, size=0xff, align=0x10
PNP0c02: adding io range 0x2a00-0x2afe, size=0xff, align=0x10
PNP0c02: adding io range 0x2b00-0x2bfe, size=0xff, align=0x10
PNP0c02: adding io range 0x2c00-0x2cfe, size=0xff, align=0x10
PNP0c02: adding io range 0x2d00-0x2dfe, size=0xff, align=0x10
PNP0c02: adding io range 0x2e00-0x2efe, size=0xff, align=0x10
PNP0c02: adding io range 0x2f00-0x2ffe, size=0xff, align=0x10
pnpbios: handle 23 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x5000-0x50fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5100-0x51fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5200-0x52fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5300-0x53fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5400-0x54fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5500-0x55fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5600-0x56fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5700-0x57fe, size=0xff, align=0x10
pnpbios: handle 24 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x5800-0x58fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5900-0x59fe, size=0xff, align=0x10
PNP0c02: adding io range 0x5a00-0x5afe, size=0xff, align=0x10
PNP0c02: adding io range 0x5b00-0x5bfe, size=0xff, align=0x10
PNP0c02: adding io range 0x5c00-0x5cfe, size=0xff, align=0x10
PNP0c02: adding io range 0x5d00-0x5dfe, size=0xff, align=0x10
PNP0c02: adding io range 0x5e00-0x5efe, size=0xff, align=0x10
PNP0c02: adding io range 0x5f00-0x5ffe, size=0xff, align=0x10
pnpbios: handle 25 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x6000-0x60fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6100-0x61fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6200-0x62fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6300-0x63fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6400-0x64fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6500-0x65fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6600-0x66fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6700-0x67fe, size=0xff, align=0x10
pnpbios: handle 26 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0x6800-0x68fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6900-0x69fe, size=0xff, align=0x10
PNP0c02: adding io range 0x6a00-0x6afe, size=0xff, align=0x10
PNP0c02: adding io range 0x6b00-0x6bfe, size=0xff, align=0x10
PNP0c02: adding io range 0x6c00-0x6cfe, size=0xff, align=0x10
PNP0c02: adding io range 0x6d00-0x6dfe, size=0xff, align=0x10
PNP0c02: adding io range 0x6e00-0x6efe, size=0xff, align=0x10
PNP0c02: adding io range 0x6f00-0x6ffe, size=0xff, align=0x10
pnpbios: handle 27 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xa000-0xa0fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa100-0xa1fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa200-0xa2fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa300-0xa3fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa400-0xa4fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa500-0xa5fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa600-0xa6fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa700-0xa7fe, size=0xff, align=0x10
pnpbios: handle 28 device ID PNP0c02 (020cd041)
PNP0c02: adding io range 0xa800-0xa8fe, size=0xff, align=0x10
PNP0c02: adding io range 0xa900-0xa9fe, size=0xff, align=0x10
PNP0c02: adding io range 0xaa00-0xaafe, size=0xff, align=0x10
PNP0c02: adding io range 0xab00-0xabfe, size=0xff, align=0x10
PNP0c02: adding io range 0xac00-0xacfe, size=0xff, align=0x10
PNP0c02: adding io range 0xad00-0xadfe, size=0xff, align=0x10
PNP0c02: adding io range 0xae00-0xaefe, size=0xff, align=0x10
PNP0c02: adding io range 0xaf00-0xaffe, size=0xff, align=0x10
pnpbios: handle 29 device ID PNP0c02 (020cd041)
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
pmtimer0 on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0103> failed to probe at iomem 0xfed00000-0xfed003ff pnpid PNP0103 on isa0
attimer0: <AT timer> at port 0x40-0x5f irq 0 pnpid PNP0100 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 55
Event timer "i8254" frequency 1193182 Hz quality 100
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 pnpid PNP0303 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on isa0
atrtc0: <AT realtime clock> at port 0x70-0x7f irq 8 pnpid PNP0b00 on isa0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xcfe88c00-0xcfffffff pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x100-0x1fe pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x3c0-0x3e7,0x3f6-0x3f7 pnpid PNP0c02 on isa0
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcdfff,0xce000-0xcffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata1 failed to probe at port 0x170 irq 15 on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xcfe88c00-0xcfffffff pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x100-0x1fe pnpid PNP0c02 on isa0
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c02> at port 0x3c0-0x3e7 pnpid PNP0c02 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr f2d00000f2d
device_attach: est0 attach returned 6
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99752314 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Sigmatel STAC9221
hdac0: HDA Codec ID: 0x83847680
hdac0: Vendor: 0x8384
hdac0: Device: 0x7680
hdac0: Revision: 0x32
hdac0: Stepping: 0x01
hdac0: PCI Subvendor: 0x01d21028
hdac0: Found audio FG nid=1 startnode=2 endnode=28 total=26
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0xc0000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
hdac0: nid 10 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
hdac0: nid 11 0x01019014 as 1 seq 4 Line-out Jack jack 1 loc 1 color Pink misc 0
hdac0: nid 12 0x01011012 as 1 seq 2 Line-out Jack jack 1 loc 1 color Black misc 0
hdac0: nid 13 0x01014010 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 0
hdac0: nid 14 0x02a11020 as 2 seq 0 Mic Jack jack 1 loc 2 color Black misc 0
hdac0: nid 15 0x01016011 as 1 seq 1 Line-out Jack jack 1 loc 1 color Orange misc 0
hdac0: nid 16 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 17 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0
hdac0: nid 21 0x0181332e as 2 seq 14 Line-in Jack jack 1 loc 1 color Blue misc 3
hdac0: nid 27 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0
hdac0: Patched pins configuration:
hdac0: nid 10 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
hdac0: nid 11 0x01019014 as 1 seq 4 Line-out Jack jack 1 loc 1 color Pink misc 0
hdac0: nid 12 0x01011012 as 1 seq 2 Line-out Jack jack 1 loc 1 color Black misc 0
hdac0: nid 13 0x01014010 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 0
hdac0: nid 14 0x02a11020 as 2 seq 0 Mic Jack jack 1 loc 2 color Black misc 0
hdac0: nid 15 0x01016011 as 1 seq 1 Line-out Jack jack 1 loc 1 color Orange misc 0
hdac0: nid 16 0x40f000f0 as 15 seq 0 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 17 0x40f000f1 as 15 seq 1 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: nid 21 0x0181332e as 2 seq 14 Line-in Jack jack 1 loc 1 color Blue misc 3
hdac0: nid 27 0x40f000f2 as 15 seq 2 Other None jack 0 loc 0 color Unknown misc 0 [DISABLED]
hdac0: 2 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=13 seq=0
hdac0: Pin nid=15 seq=1
hdac0: Pin nid=12 seq=2
hdac0: Pin nid=11 seq=4
hdac0: Pin nid=10 seq=15
hdac0: Association 1 (2) in:
hdac0: Pin nid=14 seq=0
hdac0: Pin nid=21 seq=14
hdac0: Tracing association 0 (1)
hdac0: Pin 13 traced to DAC 2
hdac0: Pin 15 traced to DAC 5
hdac0: Pin 12 traced to DAC 3
hdac0: Pin 11 traced to DAC 4
hdac0: Pin 10 traced to DAC 2 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0: Pin 14 traced to ADC 6
hdac0: Pin 21 traced to ADC 6
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing other input monitors
hdac0: Tracing nid 14 to out
hdac0: Tracing nid 21 to out
hdac0: Tracing beeper
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: as=0 sense nid=10 [UNSOL]
hdac0: Pin sense: nid=10 res=0x7fffffff
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
hdac0: -----------------
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: IN amp: 0x80050e00
hdac0: OUT amp: 0x80027f7f
hdac0:
hdac0: nid: 2
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00008001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 3
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00000004)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 4
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00000010)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 5
hdac0: Name: audio output
hdac0: Widget cap: 0x000d0c05
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00000002)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: Output amp: 0x80027f7f
hdac0: mute=1 step=127 size=2 offset=127
hdac0:
hdac0: nid: 6
hdac0: Name: audio input
hdac0: Widget cap: 0x001d0541
hdac0: PWR PROC STEREO
hdac0: Association: 1 (0x00004001)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=23 [audio selector]
hdac0:
hdac0: nid: 7 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x001d0541
hdac0: PWR PROC STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=24 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 8 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00040211
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:
hdac0: nid: 9 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x00140311
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=17 [pin: Other (None)] [DISABLED]
hdac0:
hdac0: nid: 10
hdac0: Name: pin: Headphones (Black Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00008000)
hdac0: Pin cap: 0x0000173f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x0221101f
hdac0: Pin control: 0x00000080 HP
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=2 [audio output]
hdac0:
hdac0: nid: 11
hdac0: Name: pin: Line-out (Pink Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000010)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x01019014
hdac0: Pin control: 0x00000040 OUT
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=4 [audio output]
hdac0:
hdac0: nid: 12
hdac0: Name: pin: Line-out (Black Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000004)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x01011012
hdac0: Pin control: 0x00000040 OUT
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=3 [audio output]
hdac0:
hdac0: nid: 13
hdac0: Name: pin: Line-out (Green Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x0000173f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x01014010
hdac0: Pin control: 0x00000040 OUT
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=2 [audio output]
hdac0:
hdac0: nid: 14
hdac0: Name: pin: Mic (Black Jack)
hdac0: Widget cap: 0x00400081
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: mic (mic)
hdac0: Pin cap: 0x00000024
hdac0: PDC IN
hdac0: Pin config: 0x02a11020
hdac0: Pin control: 0x00000020 IN
hdac0:
hdac0: nid: 15
hdac0: Name: pin: Line-out (Orange Jack)
hdac0: Widget cap: 0x00400181
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000002)
hdac0: Pin cap: 0x00000037
hdac0: ISC TRQD PDC OUT IN
hdac0: Pin config: 0x01016011
hdac0: Pin control: 0x00000040 OUT
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=5 [audio output]
hdac0:
hdac0: nid: 16 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400301
hdac0: DIGITAL STEREO
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x40f000f0
hdac0: Pin control: 0x00000000
hdac0: connections: 3
hdac0: |
hdac0: + <- nid=8 [audio output] [DISABLED] (selected)
hdac0: + <- nid=23 [audio selector]
hdac0: + <- nid=25 [vendor widget] [DISABLED]
hdac0:
hdac0: nid: 17 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00430681
hdac0: PWR DIGITAL UNSOL STEREO
hdac0: Pin cap: 0x00010024
hdac0: PDC IN EAPD
hdac0: Pin config: 0x40f000f1
hdac0: Pin control: 0x00000000
hdac0: EAPD: 0x00000002
hdac0:
hdac0: nid: 18
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, mic
hdac0: Output amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + <- nid=14 [pin: Mic (Black Jack)] (selected)
hdac0: + <- nid=21 [pin: Line-in (Blue Jack)]
hdac0: + [DISABLED] <- nid=15 [pin: Line-out (Orange Jack)]
hdac0: + [DISABLED] <- nid=11 [pin: Line-out (Pink Jack)]
hdac0: + [DISABLED] <- nid=12 [pin: Line-out (Black Jack)]
hdac0: + [DISABLED] <- nid=13 [pin: Line-out (Green Jack)]
hdac0: + [DISABLED] <- nid=10 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 19 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + <- nid=14 [pin: Mic (Black Jack)] (selected)
hdac0: + <- nid=21 [pin: Line-in (Blue Jack)]
hdac0: + <- nid=15 [pin: Line-out (Orange Jack)]
hdac0: + <- nid=11 [pin: Line-out (Pink Jack)]
hdac0: + <- nid=12 [pin: Line-out (Black Jack)]
hdac0: + <- nid=13 [pin: Line-out (Green Jack)]
hdac0: + <- nid=10 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 20
hdac0: Name: beep widget
hdac0: Widget cap: 0x0070000c
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker (speaker)
hdac0: Output amp: 0x00170303
hdac0: mute=0 step=3 size=23 offset=3
hdac0:
hdac0: nid: 21
hdac0: Name: pin: Line-in (Blue Jack)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Association: 1 (0x00004000)
hdac0: OSS: line (line)
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x0181332e
hdac0: Pin control: 0x00000020 IN
hdac0:
hdac0: nid: 22 [DISABLED]
hdac0: Name: volume widget
hdac0: Widget cap: 0x00600000
hdac0: connections: 4
hdac0: |
hdac0: + <- nid=2 [audio output] (selected)
hdac0: + <- nid=3 [audio output]
hdac0: + <- nid=4 [audio output]
hdac0: + <- nid=5 [audio output]
hdac0:
hdac0: nid: 23
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300903
hdac0: LRSWAP STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, mic
hdac0: Input amp: 0x80050e00
hdac0: mute=1 step=14 size=5 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=18 [audio selector]
hdac0:
hdac0: nid: 24 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300903
hdac0: LRSWAP STEREO
hdac0: Input amp: 0x80050e00
hdac0: mute=1 step=14 size=5 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=19 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 25 [DISABLED]
hdac0: Name: vendor widget
hdac0: Widget cap: 0x00f30201
hdac0: DIGITAL STEREO
hdac0:
hdac0: nid: 26 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00030201
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e07e0
hdac0: 16 20 24 bits, 44 48 88 96 176 192 KHz
hdac0:
hdac0: nid: 27 [DISABLED]
hdac0: Name: pin: Other (None)
hdac0: Widget cap: 0x00400301
hdac0: DIGITAL STEREO
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x40f000f2
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=26 [audio output] [DISABLED]
hdac0:
pcm0: <HDA Sigmatel STAC9221 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0: DAC: 2 5 3 4
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: 16 20 24 bits, 44 48 88 96 176 192 KHz
pcm0: ADC: 6
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=13 [pin: Line-out (Green Jack)]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0:
pcm0: nid=15 [pin: Line-out (Orange Jack)]
pcm0: |
pcm0: + <- nid=5 [audio output] [src: pcm]
pcm0:
pcm0: nid=12 [pin: Line-out (Black Jack)]
pcm0: |
pcm0: + <- nid=3 [audio output] [src: pcm]
pcm0:
pcm0: nid=11 [pin: Line-out (Pink Jack)]
pcm0: |
pcm0: + <- nid=4 [audio output] [src: pcm]
pcm0:
pcm0: nid=10 [pin: Headphones (Black Jack)]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=6 [audio input]
pcm0: |
pcm0: + <- nid=23 [audio selector] [src: line, mic]
pcm0: |
pcm0: + <- nid=18 [audio selector] [src: line, mic]
pcm0: |
pcm0: + <- nid=14 [pin: Mic (Black Jack)] [src: mic]
pcm0: + <- nid=21 [pin: Line-in (Blue Jack)] [src: line]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- ctl 1 (nid 2 out): -95/0dB (128 steps) + mute
pcm0: +- ctl 2 (nid 3 out): -95/0dB (128 steps) + mute
pcm0: +- ctl 3 (nid 4 out): -95/0dB (128 steps) + mute
pcm0: +- ctl 4 (nid 5 out): -95/0dB (128 steps) + mute
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- ctl 1 (nid 2 out): -95/0dB (128 steps) + mute
pcm0: +- ctl 2 (nid 3 out): -95/0dB (128 steps) + mute
pcm0: +- ctl 3 (nid 4 out): -95/0dB (128 steps) + mute
pcm0: +- ctl 4 (nid 5 out): -95/0dB (128 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0: |
pcm0: +- ctl 7 (nid 20 out): -18/0dB (4 steps)
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- ctl 5 (nid 18 out): 0/40dB (5 steps)
pcm0: +- ctl 8 (nid 23 in 0): 0/21dB (15 steps) + mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "rec":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap cc0f0000, 4000; 0xecbc0000 -> cc0f0000
pcm0: sndbuf_setmap cc100000, 4000; 0xecbd0000 -> cc100000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x80 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x80 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe0:ata0:0:0:0): SIGNATURE: eb14
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ata2: SATA reset: ports status=0x05
ata2: p0: SATA connect timeout status=00000000
ata2: p1: SATA connect timeout status=00000000
(aprobe0:ata0:0:1:0): SIGNATURE: eb14
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ata3: SATA reset: ports status=0x00
ata3: p0: SATA connect timeout status=00000000
ata3: p1: SATA connect timeout status=00000000
pass0 at ata0 bus 0 scbus0 target 0 lun 0
pass0: <HL-DT-ST CDRW/DVD GCC4482 E107> Removable CD-ROM SCSI-0 device
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
pass1 at ata0 bus 0 scbus0 target 1 lun 0
pass1: <LITE-ON DVD+RW SOHW-822S VPPA> Removable CD-ROM SCSI-0 device
pass1: Serial Number 2004070900035195
pass1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
Timecounter "TSC" frequency 2992567387 Hz quality 1000
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST CDRW/DVD GCC4482 E107> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [256943 x 2048 byte records]
GEOM: new disk cd0
GEOM: new disk cd1
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(cd1:ata0:0:1:0): Retrying command (per sense data)
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
cd1 at ata0 bus 0 scbus0 target 1 lun 0
cd1: <LITE-ON DVD+RW SOHW-822S VPPA> Removable CD-ROM SCSI-0 device
cd1: Serial Number 2004070900035195
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <vendor 0x0424> at usbus4
uhub5: <vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 2> on usbus4
uhub5: 4 ports with 4 removable, self powered
ugen4.3: <Logitech> at usbus4
ums0: <Logitech USB Mouse, class 0/0, rev 1.10/6.20, addr 3> on usbus4
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 3 eb ae 0 0 1 0
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:64,0 (Illegal mode for this track)
(cd0:ata0:0:0:0): Error 6, Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd1:ata0:0:1:0): Error 6, Unretryable error
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ums0: error reading report description
device_attach: ums0 attach returned 12
Root mount waiting for: usbus4
ugen4.4: <Dell> at usbus4
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on usbus4
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Root mount waiting for: usbus4
ugen4.5: <samsung> at usbus4
Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]...
start_init: trying /sbin/init
ugen2.2: <vendor 0x2478> at usbus2
uplcom0: <vendor 0x2478 product 0x2008, class 0/0, rev 1.10/0.01, addr 2> on usbus2
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201207151547.q6FFlJu8078440>