Date: Fri, 14 Apr 2000 14:27:55 -0700 From: Edwin Culp <eculp@EnContacto.Net> To: "Michael I. Vasilenko" <acid@cn.ua> Cc: "current@FreeBSD.ORG" <current@FreeBSD.ORG> Subject: Re: PCI-CardBus bridge + PCMCIA Lucent WaveLAN IEEE troubles Message-ID: <38F78D5A.FBC13546@EnContacto.Net> References: <Pine.BSF.4.21.0004141931270.33533-100000@wicket.ci.net.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
Michael, I just threw one in my laptop a couple of days ago. I didn't even have to recompile the kernel. I just added the stock WaveLAN section to my pccard.conf let it load the if_wi.ko and it worked. Although when I reboot I have to take the card out and put it back in because there seems to be a delay with the kernel module that causes the driver to initially fail that probably wouldn't happen if I had support compiled into the kernel, but I really didn't plan to use it that often but it is working so well I think that I will. My pccard.conf is : # Generally available IO ports io 0x240-0x360 # Generally available IRQs (Built-in sound-card owners remove 5) irq 9 11 # # Cut out my modem and nic entries. # # Lucent WaveLAN/IEEE card "Lucent Technologies" "WaveLAN/IEEE" config 0x1 "wi0" ? insert logger -t pccard:$device -s WaveLAN/IEEE inserted insert /etc/pccard_ether $device remove logger -t pccard:$device -s WaveLAN/IEEE removed remove /sbin/ifconfig $device delete The messages are: # kldstat 1 0xc0c73000 5000 if_wi.ko pccard1: <PC Card bus -- kludge version> on pcic0 pccard: card inserted, slot 0 pccard: card removed, slot 0 pccard: card inserted, slot 0 wi0: <WaveLAN/IEEE 802.11> at port 0x240-0x27f irq 9 slot 0 on pccard0 wi0: Ethernet address: 00:60:1d:03:f4:08 Hope this helps. ed P.S. I did have to make some configuration changes with wicontrol to communicate with my in-talk/nokia access point. "Michael I. Vasilenko" wrote: > Recently our firm bought Lucent wireless hardware - PCI Adapter and > PCMCIA card. After unsucsessfull trying to get it work on 3.4+PAO, > I've upgraded to 5.0-CURRENT. > > All hardware ssems to be detected, pccardc pccardmem 0xd4000 is ok, > but after running pccardd it says: > > pccardd[166]: Card "Lucent Technologies"("WaveLAN/IEEE") matched "Lucent Technologies" ("WaveLAN/IEEE") > pccardd[166]: Using I/O addr 0x100, size 64 > pccardd[166]: Setting config reg at offs 0x3e0 to 0x41, Reset time = 50 ms > pccardd[166]: Assigning I/O window 0, start 0x100, size 0x40 flags 0x5 > /kernel: wi0: <WaveLAN/IEEE 802.11> at port 0x100-0x13f irq 7 slot 0 on pccard0 > /kernel: wi0: Ethernet address: 00:60:1d:f6:cc:5d > > and machine just hangs completly. > > Any help would be great. > > kernel config: > > device card > device pcic0 at isa? > device wi > > kernel.conf: > > config> port pcic0 0x3e0 > config> irq pcic0 5 > config> iomem pcic0 0xd4000 > config> q > > pieces of dmesg: > > ... > pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> mem 0xea000000-0xea000fff irq 10 at device 16.0 on pci0 > pcic-pci0: TI12XX PCI Config Reg: [pwr save][pci only] > pcic-pci0: Legacy address set to 0x3e0 > pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> mem 0xea004000-0xea004fff irq 10 at device 16.1 on pci0 > pcic-pci1: TI12XX PCI Config Reg: [pwr save][pci only] > ... > pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd4000 irq 5 drq 0 on isa0 > pcic0: management irq 5 > pccard0: <PC Card bus -- kludge version> on pcic0 > pccard1: <PC Card bus -- kludge version> on pcic0 > ... > pccard: card inserted, slot 0 > pccard: card inserted, slot 1 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38F78D5A.FBC13546>