Date: Wed, 28 Nov 2001 00:11:33 +1100 From: Danny <dannyho@bugpond.net.au> To: questions@freebsd.org Cc: freebsd-multimedia@freebsd.org Subject: 16 Bit Integrated Sound(onboard ) ? Message-ID: <01112800113300.00408@freebsd.freebsd.org>
next in thread | raw e-mail | index | archive | help
Hello, I am having some problem with my ondboard sound card. I did the things listed below and I still cannot get any sound. 1) I have the following sound card. - 16 Bit Integrated Sound(onboard) 2)I have added the following and compiled the KERNEL -options PNPBIOS -device pcm 3) Here is the output of dmesg Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.3-RELEASE #0: Sun Nov 25 22:22:24 EST 2001 dannyho@freebsd.freebsd.org:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (933.37-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 117374976 (114624K bytes) avail memory = 109514752 (106948K bytes) Preloaded elf kernel "kernel" at 0xc049e000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Integrated TNT2 graphics accelerator> at 0.0 irq 11 ohci0: mem 0xdffdf000-0xdffdffff irq 10 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab0: at device 7.0 on pci0 isa0: on isab0 pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 5 at device 12.0 on pci0 pci0: (vendor=0x13f6, dev=0x0211) at 12.1 irq 9 sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 0xdffde000-0xdffdefff irq 3 at device 14.0 on pci0 sis0: Ethernet address: 00:d0:09:cb:97:8b miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: port 0xffa0-0xffaf irq 0 at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xd000-0xd01f irq 3 at device 20.0 on pci0 ed0: address 00:4f:49:0a:1f:8d, type NE2000 (16 bit) fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0000> can't assign resources unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources unknown: <PNP0700> can't assign resources unknown: <PNP0a03> can't assign resources unknown: <PNP0f13> can't assign resources ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ad0: 19092MB <WDC WD200AB-00BVA0> [38792/16/63] at ata0-master UDMA33 acd0: DVD-ROM <SAMSUNG DVD-ROM SD-612F> at ata0-slave using PIO4 Mounting root from ufs:/dev/ad0s1a pid 384 (artsd), uid 1000: exited on signal 11 (core dumped) 4) Here is the output of cat /dev/sndstat FreeBSD Audio Driver (newpcm) Nov 25 2001 22:21:55 Installed devices: pcm0: <CMedia CMI8738> at io 0xd800 irq 5 (1p/1r channels duplex) To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01112800113300.00408>