Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 8 Sep 2009 14:45:21 +0200
From:      Oliver Fakler <oliver@namp.de>
To:        <freebsd-current@freebsd.org>
Subject:   Re: boot from raidz
Message-ID:  <24905.1252413921@namp.de>

next in thread | raw e-mail | index | archive | help


On Mon 07/09/09 20:22 , Paul Wootton  wrote:Oliver Fakler wrote:
 > On Mon 07/09/09 13:40 , Bernhard Schmidt  wrote:
 >  Am 07.09.2009 um 11:13 schrieb Oliver Fakler:
 >  >
 >  > BODY { font-family:Arial, Helvetica, sans-serif;font-size:12px;
}
 >  >
 >  > On Mon 07/09/09 10:07 , Bernhard Schmidt  =20
 >  > wrote:
 >  >
 >  >
 >  > Am 06.09.2009 um 21:45 schrieb Oliver Fakler:
 >  >
 >  > >
 >  > >
 >  > > Hi all,
 >  > >
 >  > > i installed a 8.0 beta 3 amd64 based testsystem.
 >  > >
 >  > > i tried with a root on a raidz, but i have a problem after
the
 > first
 >  > > reboot, there is a error message:
 >  > >
 >  > > can't load kernel
 >  > > I found something that boot root from raidz is not supported,
 > but
 >  > > maybe there is a solution??
 >  > > Hope some can help me
 >  >
 >  >
 >  > There are patches from Doug Rabson which add support for
booting
 > from
 >  > raidz/raidz2.
 >  >
 >  >
 >
http://lists.freebsd.org/pipermail/freebsd-fs/2008-December/005498.html
[1]"
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
 > [2]"
 >
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
[2]"
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
 >
 >  > "
 >
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
[3]"
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
 > [3]"
 >
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
[4]"
target=3D"_blank">http://lists.freebsd.org/pipermail/freebsd-fs/2008-Decemb=
er/005498.html
 >  Seems that patch made it already into the tree (r192194).
 >  >
 >  >
 >  > I tried it, but after a make obj && make depend the make failed
 > with =20
 >  > different errors like undeclared and has no member named.
 >  >
 >  > I used patch raidzboot-14052009.diff started patching from
 > /usr/src/=20
 >  > sys/ , i'm not sure if this was the right way.
 >  >
 >  > I'm also not sure if the way of installation was the right one,
=20
 >  > here's the way i go:
 >  >
 >  >
 >  > gpart create -s GPT da0
 >  > gpart add -b 34 -s 128 -t freebsd-boot da0
 >  > gpart add -b 162 -s 5242880 -t freebsd-swap da0
 >  > gpart add -b 5243042 -s 11534141 -t freebsd-zfs da0
 >  > gpart bootcode -b /mnt2/boot/pmbr -p /mnt2/boot/gptzfsboot -i 1
 > da0
 >  > gpart bootcode -b /mnt2/boot/pmbr -p /mnt2/boot/gptzfsboot -i 1
 > da1
 >  > gpart bootcode -b /mnt2/boot/pmbr -p /mnt2/boot/gptzfsboot -i 1
 > da2
 >  >
 >  Can you try zfsboot instead of gptzfsboot?
 >
 >
http://unix.derkeiler.com/Mailing-Lists/FreeBSD/stable/2009-05/msg00689.htm=
l
[5]"
target=3D"_blank">http://unix.derkeiler.com/Mailing-Lists/FreeBSD/stable/20=
09-05/msg00689.html
 > [4]"
 >
target=3D"_blank">http://unix.derkeiler.com/Mailing-Lists/FreeBSD/stable/20=
09-05/msg00689.html
[6]"
target=3D"_blank">http://unix.derkeiler.com/Mailing-Lists/FreeBSD/stable/20=
09-05/msg00689.html
 >
 >    at the end of the mail.
 >  >
 >  >
 >  > kldload /mnt2/boot/kernel/opensolaris.ko
 >  > kldload /mnt2/boot/kernel/zfs.ko
 >  >
 >  > zpool create tank raidz da0p3 da1p1 d2p1
 >  >
 >  > zfs create tank/tmp
 >  > zfs create tank/usr
 >  > zfs create tank/var
 >  >
 >  > cd /dist/8.0-BETA3/base
 >  > export DESTDIR=3D/tank
 >  > ./install.sh
 >  > You are about to extract the base distribution into /tank - are
 > you =20
 >  > SURE
 >  > you want to do this over your installed system (y/n)? y
 >  > cd ../kernels
 >  > ./install.sh generic
 >  > cd /tank/boot
 >  > cp -Rp GENERIC/* kernel/
 >  >
 >  > cd /dist/8.0-BETA3/src
 >  > ./install.sh all
 >  > Extracting sources into /usr/src...
 >  >   Extracting source component: base
 >  >   Extracting source component: bin
 >  >   Extracting source component: cddl
 >  >   Extracting source component: contrib
 >  >   Extracting source component: crypto
 >  >   Extracting source component: etc
 >  >   Extracting source component: games
 >  >   Extracting source component: gnu
 >  >   Extracting source component: include
 >  >   Extracting source component: krb5
 >  >   Extracting source component: lib
 >  >   Extracting source component: libexec
 >  >   Extracting source component: release
 >  >   Extracting source component: rescue
 >  >   Extracting source component: sbin
 >  >   Extracting source component: secure
 >  >   Extracting source component: share
 >  >   Extracting source component: sys
 >  >   Extracting source component: tools
 >  >   Extracting source component: ubin
 >  >   Extracting source component: usbin
 >  > Done extracting sources.
 >  > Done extracting sources.
 >  > cd ../manpages
 >  > ./install.sh
 >  >
 >  > echo 'zfs_enable=3D"YES"' > /tank/etc/rc.conf
 >  > echo 'LOADER_ZFS_SUPPORT=3D"YES"' > /tank/etc/src.conf
 >  > echo 'zfs_load=3D"YES"' > /tank/boot/loader.conf
 >  > echo 'vfs.root.mountfrom=3D"zfs:tank"' >> /tank/boot/loader.conf
 >  > echo &acute;/dev/da0p2 none swap sw 0 0&acute;>>
/tank/etc/fstab
 >  >
 >  > mkdir /boot/zfs
 >  > zpool export tank && zpool import tank
 >  > cp /boot/zfs/zpool.cache /tank/boot/zfs/
 >  >
 >  > chroot /tank
 >  > mount -t devfs devfs /dev
 >  > unset DESTDIR
 >  > cd /usr/src/sys/boot/
 >  > make obj
 >  > make depend
 >  > make
 >  > cd i386/loader
 >  > make install
 >  > umount /dev
 >  > touch /etc/fstab
 >  > exit
 >  >
 >  > export LD_LIBRARY_PATH=3D/mnt2/lib
 >  > zfs set mountpoint=3Dlegacy tank
 >  > zfs set mountpoint=3D/tmp tank/tmp
 >  > zfs set mountpoint=3D/var tank/var
 >  > zfs set mountpoint=3D/usr tank/usr
 >  > zpool set bootfs=3Dtank tank
 >  >
 >  Seems correct at first glance.
 >  --
 >  Bernhard
 > testet with zfsboot instead of gptzfsboot but it was not
successfull
 > :-(
 >
 > Links:
 > ------
 > [2] http://mail.kuehlbox.de/parse.php%3Fredirect%3D%26lt%3Ba [7]"
target=3D"_blank">http://mail.kuehlbox.de/parse.php?redirect=3D [3]
http://mail.kuehlbox.de/parse.php%3Fredirect%3D%26lt%3Ba [8]"
target=3D"_blank">http://mail.kuehlbox.de/parse.php?redirect=3D [4]
http://mail.kuehlbox.de/parse.php%3Fredirect%3D%26lt%3Ba [9]"
target=3D"_blank">http://mail.kuehlbox.de/parse.php?redirect=3D
_______________________________________________
 >  mailing list
 > http://lists.freebsd.org/mailman/listinfo/freebsd-current [11]"
target=3D"_blank">http://lists.freebsd.org/mailman/listinfo/freebsd-current
 > To unsubscribe, send any mail to "
 I have a fully running GPT ZFS RaidZ setup using what was at the
time 8-HEAD
 I cant remember the exact steps I took, but one thing I have
different=20
 is I have a root filesystem within my zpool
 [ /usr/home/paul]$ gpart show
 =3D>       34  976773101  ada1  GPT  (466G)
          34        256     1  freebsd-boot  (128K)
         290    8388608     2  freebsd-swap  (4.0G)
     8388898  147912557     3  freebsd-zfs  (71G)
   156301455  820471680        - free -  (391G)
 =3D>       34  488394988  ada2  GPT  (233G)
          34        256     1  freebsd-boot  (128K)
         290    8388608     2  freebsd-swap  (4.0G)
     8388898  147912557     3  freebsd-zfs  (71G)
   156301455  332093567        - free -  (158G)
 =3D>       34  156301421  ada3  GPT  (75G)
          34        256     1  freebsd-boot  (128K)
         290    8388608     2  freebsd-swap  (4.0G)
     8388898  147912557     3  freebsd-zfs  (71G)
 [ /usr/home/paul]$ zpool status
   pool: zboot
  state: ONLINE
  scrub: none requested
 config:
         NAME        STATE     READ WRITE CKSUM
         zboot       ONLINE       0     0     0
           ada1p3    ONLINE       0     0     0
           ada2p3    ONLINE       0     0     0
           ada3p3    ONLINE       0     0     0
 errors: No known data errors
 [ /usr/home/paul]$ zfs list
 NAME           USED  AVAIL  REFER  MOUNTPOINT
 zboot         33.5G   175G    18K  none
 zboot/root    12.4G   175G  12.2G  none
 zboot/tmp     82.9M   175G  82.6M  none
 zboot/usr     20.8G   175G  16.5G  none
 zboot/var      216M   175G   123M  none
 Im also using fstabs to mount my ZFS filesystems
 [ /usr/home/paul]$ more /etc/fstab
 # Device        Mountpoint      FStype          Options         Dump
  =20
 Pass#
 zboot/root      /               zfs             rw              0  =20
   0
 zboot/usr       /usr            zfs             rw              0  =20
   0
 zboot/var       /var            zfs             rw              0  =20
   0
 zboot/tmp       /tmp            zfs             rw,noatime      0  =20
   0
 proc            /proc           procfs          rw              0  =20
   0
 I remember speak to someone a while back, and I *think* we came to
the=20
 conclusion that using the zpool as your root will not work correctly
and=20
 you should really create a root filesystem inside the zpool
 Lets me know how this works out for you
 Paul

---------------------------------------------------------------------------=
--------
 Fletcher Moorland Limited is a company registered in England and
Wales.=20
 Registration number: 2984467.=20
 Registered office: Elenora Street, Stoke on Trent, Staffordshire,
ST4 1QG.=20
 VAT Registration number: 478730606=20
 Telephone: 01782 411021 | Fax: 01782 744470 |
http://www.fletchermoorland.co.uk [17]"
target=3D"_blank">http://www.fletchermoorland.co.uk=20
 _______________________________________________
  mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-current [19]"
target=3D"_blank">http://lists.freebsd.org/mailman/listinfo/freebsd-current
 To unsubscribe, send any mail to ""
	your pool is just a stripe, no raidz

	i testet it with striping, and it was successfull, but i need a
raidz

	there are some new errors on Beta4

	can'tfind root filesystem

	maybe you're right with your idea of an extra root folder, but i
think if he can't find root filesystem, he also can't read fstab.
	maybe more ideas? :-)
	cheers=20
	Oliver

Links:
------
[1] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[2] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[3] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[4] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[5] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[6] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[7] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[8] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[9] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[11] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[17] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D
[19] http://mail.kuehlbox.de/parse.php?redirect=3D<a href=3D



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?24905.1252413921>