FreeBSD Mail Archives

Date:      Sat, 3 Nov 2001 00:18:40 -0600
From:      "Adam Wood" <woodfucius@yahoo.com>
To:        <Questions@FreeBSD.ORG>
Subject:   RE: Port Scan Request 2
Message-ID:  <000201c1642f$6497e040$0100a8c0@wood>
In-Reply-To: <00c701c16428$a4b43ef0$0200a8c0@supportjlgjov8>

<NEWBIE DIAGNOSIS> Access to port 80 on your machine is filtered (see
scan results below), most likely by your ISP because they don't want
people running web servers.  Even if you open it on your machine, no
requests to port 80 will get through because they're being dropped by
your ISP.  You can either talk to your ISP about opening up port 80
(good luck) or configure Apache to listen on a different port with the
Port directive (i.e. change the line in your httpd.conf that says Port
80 to Port 8080) and just choose the port you want Apache to use.  Your
conf file looks fine except that you have Apache set to listen on port
80, which it appears your ISP will not let you use.  A minor
inconvenience, yes, but it's a simple matter of publishing your web
address with a port number (i.e. http://andromeda.mine.nu:8080 )
</NEWBIE DIAGNOSIS>


# nmap (V. 2.54BETA29) scan initiated Fri Nov  2 23:50:35 2001 as: nmap
-sS -O -vv -oN nmap_run_2.txt andromeda.mine.nu 
Insufficient responses for TCP sequencing (3), OS detection may be less
accurate Interesting ports on ool-182dd617.dyn.optonline.net
(24.45.214.23): (The 1525 ports scanned but not shown below are in
state: closed)
Port       State       Service
21/tcp     open        ftp                     
22/tcp     open        ssh                     
23/tcp     open        telnet                  
25/tcp     open        smtp                    
53/tcp     open        domain                  
79/tcp     open        finger                  
80/tcp     filtered    http                    
98/tcp     open        linuxconf               
110/tcp    open        pop-3                   
111/tcp    open        sunrpc                  
137/tcp    filtered    netbios-ns              
138/tcp    filtered    netbios-dgm             
139/tcp    filtered    netbios-ssn             
143/tcp    open        imap2                   
443/tcp    open        https                   
445/tcp    filtered    microsoft-ds            
513/tcp    open        login                   
514/tcp    open        shell                   
515/tcp    open        printer                 
587/tcp    open        submission              
1013/tcp   open        unknown                 
1024/tcp   open        kdm                     
3306/tcp   open        mysql                   

Remote OS guesses: Linux 2.1.19 - 2.2.17, Linux kernel 2.2.13, Linux
2.2.14, Linux 2.2.19 on a DEC Alpha OS Fingerprint:
T1(Resp=Y%DF=Y%W=7F53%ACK=S++%Flags=AS%Ops=MENNTNW)
T2(Resp=N)
T3(Resp=Y%DF=Y%W=7F53%ACK=S++%Flags=AS%Ops=MENNTNW)
T4(Resp=Y%DF=N%W=0%ACK=O%Flags=R%Ops=)
T5(Resp=Y%DF=N%W=0%ACK=S++%Flags=AR%Ops=)
T6(Resp=Y%DF=N%W=0%ACK=O%Flags=R%Ops=)
T7(Resp=Y%DF=N%W=0%ACK=S%Flags=AR%Ops=)
PU(Resp=N)

Uptime 0.068 days (since Fri Nov  2 22:12:59 2001)
IPID Sequence Generation: Incremental

# Nmap run completed at Fri Nov  2 23:51:28 2001 -- 1 IP address (1 host
up) scanned in 53 seconds




-----Original Message-----
From: owner-freebsd-questions@FreeBSD.ORG
[mailto:owner-freebsd-questions@FreeBSD.ORG] On Behalf Of Andre Cameron
Sent: Friday, November 02, 2001 11:30 PM
To: Questions@FreeBSD.ORG
Subject: Port Scan Request 2


Could someone please run a port scan again?  If you dont see port 80
open can ya take a look below and tell me whats wrong with my conf file?

Thanks
Andre

************************************************************************
****
*********
#

# Based upon the NCSA server configuration files originally by Rob
McCool.

#

# This is the main Apache server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:http://www.apache.org/docs/>; for detailed information about

# the directives.

#

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are
unsure

# consult the online docs. You have been warned.

#

# After this file is processed, the server will look for and process

# /etc/httpd/conf/srm.conf and then /etc/httpd/conf/access.conf

# unless you have overridden these with ResourceConfig and/or

# AccessConfig directives here.

#

# The configuration directives are grouped into three basic sections:

# 1. Directives that control the operation of the Apache server process
as a

# whole (the 'global environment').

# 2. Directives that define the parameters of the 'main' or 'default'
server,

# which responds to requests that aren't handled by a virtual host.

# These directives also provide default values for the settings

# of all virtual hosts.

# 3. Settings for virtual hosts, which allow Web requests to be sent to

# different IP addresses or hostnames and have them handled by the

# same Apache server process.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32),
the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "/usr/local/apache" will be interpreted by the

# server as "/usr/local/apache/logs/foo.log".

#

### Section 1: Global Environment

#

# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it

# can find its configuration files.

#

#

# ServerType is either inetd, or standalone. Inetd mode is only
supported on

# Unix platforms.

#

ServerType standalone

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# NOTE! If you intend to place this on an NFS (or otherwise network)

# mounted filesystem then please read the LockFile documentation

# (available at
<URL:http://www.apache.org/docs/mod/core.html#lockfile>);

# you will save yourself a lot of trouble.

#

# Do NOT add a slash at the end of the directory path.

#

ServerRoot /etc/httpd

#

# The LockFile directive sets the path to the lockfile used when Apache

# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or

# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at

# its default value. The main reason for changing it is if the logs

# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL

# DISK. The PID of the main server process is automatically appended to

# the filename.

#

#LockFile /var/lock/httpsd.lock

#

# PidFile: The file in which the server should record its process

# identification number when it starts.

#

PidFile /var/run/httpd.pid

#

# ScoreBoardFile: File used to store internal server process
information.

# Not all architectures require this. But if yours does (you'll know
because

# this file will be created when you run Apache) then you *must* ensure
that

# no two invocations of Apache share the same scoreboard file.

#

ScoreBoardFile /var/run/httpd.scoreboard

#

# In the standard configuration, the server will process this file,

# srm.conf, and access.conf in that order. The latter two files are

# now distributed empty, as it is recommended that all directives

# be kept in a single file for simplicity. The commented-out values

# below are the built-in defaults. You can have the server ignore

# these files altogether by using "/dev/null" (for Unix) or

# "nul" (for Win32) for the arguments to the directives.

#

#ResourceConfig conf/srm.conf

#AccessConfig conf/access.conf

#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300

#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On

#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100

#

# KeepAliveTimeout: Number of seconds to wait for the next request from
the

# same client on the same connection.

#

KeepAliveTimeout 15

#

# Server-pool size regulation. Rather than making you guess how many

# server processes you need, Apache dynamically adapts to the load it

# sees --- that is, it tries to maintain enough server processes to

# handle the current load, plus a few spare servers to handle transient

# load spikes (e.g., multiple simultaneous requests from a single

# Netscape browser).

#

# It does this by periodically checking how many servers are waiting

# for a request. If there are fewer than MinSpareServers, it creates

# a new spare. If there are more than MaxSpareServers, some of the

# spares die off. The default values are probably OK for most sites.

#

MinSpareServers 5

MaxSpareServers 10

#

# Number of servers to start initially --- should be a reasonable
ballpark

# figure.

#

StartServers 5

#

# Limit on total number of servers running, i.e., limit on the number

# of clients who can simultaneously connect --- if this limit is ever

# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.

# It is intended mainly as a brake to keep a runaway server from taking

# the system with it as it spirals down...

#

MaxClients 150

#

# MaxRequestsPerChild: the number of requests each child process is

# allowed to process before the child dies. The child will exit so

# as to avoid problems after prolonged use when Apache (and maybe the

# libraries it uses) leak memory or other resources. On most systems,
this

# isn't really needed, but a few (such as Solaris) do have notable leaks

# in the libraries.

#

#MaxRequestsPerChild 30

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, in addition to the default. See also the <VirtualHost>

# directive.

#

#Listen 3000

#Listen 12.34.56.78:80

#Listen 80

#

# BindAddress: You can support virtual hosts with this option. This
directive

# is used to tell the server which IP address to listen to. It can
either

# contain "*", an IP address, or a fully qualified Internet domain name.

# See also the <VirtualHost> and Listen directives.

#

BindAddress *

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a
DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are
used.

# Please read the file README.DSO in the Apache 1.3 distribution for
more

# details about the DSO mechanism and run `httpd -l' for the list of
already

# built-in (statically linked and thus always available) modules in your
httpd

# binary.

#

# Note: The order is which modules are loaded is important. Don't change

# the order below without expert advice.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#LoadModule mmap_static_module modules/mod_mmap_static.so

LoadModule env_module modules/mod_env.so

#LoadModule define_module modules/mod_define.so

LoadModule config_log_module modules/mod_log_config.so

LoadModule agent_log_module modules/mod_log_agent.so

LoadModule referer_log_module modules/mod_log_referer.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule mime_module modules/mod_mime.so

LoadModule negotiation_module modules/mod_negotiation.so

LoadModule status_module modules/mod_status.so

LoadModule info_module modules/mod_info.so

LoadModule includes_module modules/mod_include.so

LoadModule autoindex_module modules/mod_autoindex.so

LoadModule dir_module modules/mod_dir.so

LoadModule cgi_module modules/mod_cgi.so

LoadModule asis_module modules/mod_asis.so

LoadModule imap_module modules/mod_imap.so

LoadModule action_module modules/mod_actions.so

#LoadModule speling_module modules/mod_speling.so

LoadModule userdir_module modules/mod_userdir.so

LoadModule proxy_module modules/libproxy.so

LoadModule alias_module modules/mod_alias.so

LoadModule rewrite_module modules/mod_rewrite.so

LoadModule access_module modules/mod_access.so

LoadModule auth_module modules/mod_auth.so

LoadModule anon_auth_module modules/mod_auth_anon.so

LoadModule db_auth_module modules/mod_auth_db.so

LoadModule digest_module modules/mod_digest.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule expires_module modules/mod_expires.so

LoadModule headers_module modules/mod_headers.so

LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule example_module modules/mod_example.so

#LoadModule unique_id_module modules/mod_unique_id.so

LoadModule setenvif_module modules/mod_setenvif.so

<IfDefine SSL>

LoadModule ssl_module modules/libssl.so

</IfDefine>

#LoadModule sxnet_module modules/mod_sxnet.so

#LoadModule bandwidth_module modules/mod_bandwidth.so

LoadModule frontpage_module modules/mod_frontpage.so

# Additional modules, not included by default

#LoadModule php_module modules/mod_php.so

#LoadModule php3_module modules/libphp3.so

<IfDefine vwh_php4_module>

LoadModule php4_module modules/libphp4.so

</IfDefine>

<IfDefine vwh_perl_module>

LoadModule perl_module modules/libperl.so

</IfDefine>

#LoadModule jserv_module modules/mod_jserv.so

#LoadModule dav_module modules/libdav.so

#LoadModule roaming_module modules/mod_roaming.so

# Reconstruction of the complete module list from all available modules

# (static and shared ones) to achieve correct module execution order.

# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]

ClearModuleList

#AddModule mod_mmap_static.c

AddModule mod_env.c

#AddModule mod_define.c

AddModule mod_log_config.c

AddModule mod_log_agent.c

AddModule mod_log_referer.c

#AddModule mod_mime_magic.c

AddModule mod_mime.c

AddModule mod_negotiation.c

AddModule mod_status.c

AddModule mod_info.c

AddModule mod_include.c

AddModule mod_autoindex.c

AddModule mod_dir.c

AddModule mod_cgi.c

AddModule mod_asis.c

AddModule mod_imap.c

AddModule mod_actions.c

#AddModule mod_speling.c

AddModule mod_userdir.c

AddModule mod_proxy.c

AddModule mod_alias.c

AddModule mod_rewrite.c

AddModule mod_access.c

AddModule mod_auth.c

AddModule mod_auth_anon.c

AddModule mod_auth_db.c

AddModule mod_digest.c

#AddModule mod_cern_meta.c

AddModule mod_expires.c

AddModule mod_headers.c

AddModule mod_usertrack.c

#AddModule mod_example.c

#AddModule mod_unique_id.c

AddModule mod_so.c

AddModule mod_setenvif.c

<IfDefine SSL>

AddModule mod_ssl.c

</IfDefine>

#AddModule mod_sxnet.c

#AddModule mod_bandwidth.c

AddModule mod_frontpage.c

# Additional Modules, not included by default

#AddModule mod_php.c

#AddModule mod_php3.c

<IfDefine vwh_php4_module>

AddModule mod_php4.c

</IfDefine>

<IfDefine vwh_perl_module>

AddModule mod_perl.c

</IfDefine>

#AddModule mod_jserv.c

#AddModule mod_dav.c

#AddModule mod_roaming.c

#

# ExtendedStatus controls whether Apache will generate "full" status

# information (ExtendedStatus On) or just basic information
(ExtendedStatus

# Off) when the "server-status" handler is called. The default is Off,

# for performance reasons.

#

#ExtendedStatus On

### Section 2: 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# If your ServerType directive (set earlier in the 'Global Environment'

# section) is set to "inetd", the next few directives don't have any

# effect since their settings are defined by the inetd configuration.

# Skip ahead to the ServerAdmin directive.

#

#

# Port: The port to which the standalone server listens. For

# ports < 1023, you will need httpd to be run as root initially.

#

Port 80

##

## SSL Support

##

## When we also provide SSL we have to listen to the

## standard HTTP port (see above) and to the HTTPS port

##

<IfDefine SSL>

Listen 80

Listen 443

</IfDefine>

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# . On SCO (ODT 3) use "User nouser" and "Group nogroup".

# . On HPUX you may not be able to use shared memory as nobody, and the

# suggested workaround is to create a user www and use that user.

# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)

# when the value of (unsigned)Group is above 60000;

# don't use Group #-1 on these systems!

#

User web

Group web

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents.

#

ServerAdmin root@andromeda.mine.nu

#

# ServerName allows you to set a host name which is sent back to clients
for

# your server if it's different than the one the program would get
(i.e., use

# "www" instead of the host's real name).

#

# Note: You cannot just invent host names and hope they work. The name
you

# define here must be a valid DNS name for your host. If you don't
understand

# this, ask your network administrator.

# If your host doesn't have a registered DNS name, enter its IP address
here.

# You will have to access it by its address (e.g., http://123.45.67.89/)

# anyway, and this will make redirections work in a sensible way.

#

ServerName andromeda.mine.nu

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot /home/httpd/html

#

# Each directory to which Apache has access, can be configured with
respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# permissions.

#

<Directory />

Options None

AllowOverride None

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory /home/httpd/html>

#

# This may also be "None", "All", or any combination of "Indexes",

# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

Options FollowSymLinks Includes

#

# This controls which options the .htaccess files in directories can

# override. Can also be "All", or any combination of "Options",
"FileInfo",

# "AuthConfig", and "Limit"

#

AllowOverride All

#

# Controls who can get stuff from this server.

#

Order allow,deny

Allow from all

</Directory>

#

# UserDir: The name of the directory which is appended onto a user's
home

# directory if a ~user request is received.

#

UserDir public_html

#

# Control access to UserDir directories. The following is an example

# for a site where these directories are restricted to read-only.

#

#<Directory /*/public_html>

# AllowOverride FileInfo AuthConfig Limit

# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec

# <Limit GET POST OPTIONS PROPFIND>

# Order allow,deny

# Allow from all

# </Limit>

# <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>

# Order deny,allow

# Deny from all

# </Limit>

#</Directory>

#

# DirectoryIndex: Name of the file or files to use as a pre-written HTML

# directory index. Separate multiple entries with spaces.

#

DirectoryIndex index.html index.htm index.shtml index.cgi

#

# AccessFileName: The name of the file to look for in each directory

# for access control information.

#

AccessFileName .htaccess

#

# The following lines prevent .htaccess files from being viewed by

# Web clients. Since .htaccess files often contain authorization

# information, access is disallowed for security reasons. Comment

# these lines out if you want Web visitors to see the contents of

# .htaccess files. If you change the AccessFileName directive above,

# be sure to make the corresponding changes here.

#

<Files .htaccess>

Order allow,deny

Deny from all

</Files>

#

# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with
each

# document that was negotiated on the basis of content. This asks proxy

# servers not to cache the document. Uncommenting the following line
disables

# this behavior, and proxies will be allowed to cache the documents.

#

#CacheNegotiatedDocs

#

# UseCanonicalName: (new for 1.3) With this setting turned on, whenever

# Apache needs to construct a self-referencing URL (a URL that refers
back

# to the server the response is coming from) it will use ServerName and

# Port to form a "canonical" name. With this setting off, Apache will

# use the hostname:port that the client supplied, when possible. This

# also affects SERVER_NAME and SERVER_PORT in CGI scripts.

#

UseCanonicalName On

#

# TypesConfig describes where the mime.types file (or equivalent) is

# to be found.

#

TypesConfig /etc/mime.types

#

# DefaultType is the default MIME type the server will use for a
document

# if it cannot otherwise determine one, such as from filename
extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value. If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain

#

# The mod_mime_magic module allows the server to use various hints from
the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

# mod_mime_magic is not part of the default server (you have to add

# it yourself with a LoadModule [see the DSO paragraph in the 'Global

# Environment' section], or recompile the server and include
mod_mime_magic

# as part of the configuration), so it's enclosed in an <IfModule>
container.

# This means that the MIMEMagicFile directive will only be processed if
the

# module is part of the server.

#

<IfModule mod_mime_magic.c>

MIMEMagicFile conf/magic

</IfModule>

#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if
people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog logs/error_log

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\""
combined

LogFormat "%h %l %u %t \"%r\" %>s %b" common

LogFormat "%{Referer}i -> %U" referer

LogFormat "%{User-agent}i" agent

#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here. Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#

CustomLog logs/access_log common

#

# If you would like to have agent and referer logfiles, uncomment the

# following directives.

#

#CustomLog logs/referer_log referer

#CustomLog logs/agent_log agent

#

# If you prefer a single logfile with access, agent, and referer
information

# (Combined Logfile Format) you can use the following directive.

#

#CustomLog logs/access_log combined

#

# Optionally add a line containing the server version and virtual host

# name to server-generated pages (error documents, FTP directory
listings,

# mod_status and mod_info output etc., but not CGI generated documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.

# Set to one of: On | Off | EMail

#

ServerSignature On

#

# Aliases: Add here as many aliases as you need (with no limit). The
format is

# Alias fakename realname

#

# Note that if you include a trailing / on fakename then the server will

# require it to be present in the URL. So "/icons" isn't aliased in this

# example, only "/icons/"..

#

Alias /icons/ /home/httpd/icons/

<Directory /home/httpd/icons>

Options MultiViews

AllowOverride None

Order allow,deny

Allow from all

</Directory>

#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the realname directory are treated as applications and

# run by the server when requested rather than as documents sent to the
client.

# The same rules about trailing "/" apply to ScriptAlias directives as
to

# Alias.

#

ScriptAlias /cgi-bin/ /home/httpd/cgi-bin/

#

# /home/httpd/cgi-bin should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory /home/httpd/cgi-bin>

AllowOverride None

Options ExecCGI FollowSymLinks

Order allow,deny

Allow from all

</Directory>

#

# Redirect allows you to tell clients about documents which used to
exist in

# your server's namespace, but do not anymore. This allows you to tell
the

# clients where to look for the relocated document.

# Format: Redirect old-URI new-URL

#

#

# Directives controlling the display of server-generated directory
listings.

#

#

# FancyIndexing is whether you want fancy directory indexing or standard

#

IndexOptions FancyIndexing

#

# AddIcon* directives tell the server which icon to show for different

# files or filename extensions. These are only displayed for

# FancyIndexed directories.

#

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*

AddIconByType (IMG,/icons/image2.gif) image/*

AddIconByType (SND,/icons/sound2.gif) audio/*

AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe

AddIcon /icons/binhex.gif .hqx

AddIcon /icons/tar.gif .tar

AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv

AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip

AddIcon /icons/a.gif .ps .ai .eps

AddIcon /icons/layout.gif .html .shtml .htm .pdf

AddIcon /icons/text.gif .txt

AddIcon /icons/c.gif .c

AddIcon /icons/p.gif .pl .py

AddIcon /icons/f.gif .for

AddIcon /icons/dvi.gif .dvi

AddIcon /icons/uuencoded.gif .uu

AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl

AddIcon /icons/tex.gif .tex

AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..

AddIcon /icons/hand.right.gif README

AddIcon /icons/folder.gif ^^DIRECTORY^^

AddIcon /icons/blank.gif ^^BLANKICON^^

#

# DefaultIcon is which icon to show for files which do not have an icon

# explicitly set.

#

DefaultIcon /icons/unknown.gif

#

# AddDescription allows you to place a short description after a file in

# server-generated indexes. These are only displayed for FancyIndexed

# directories.

# Format: AddDescription "description" filename

#

#AddDescription "GZIP compressed document" .gz

#AddDescription "tar archive" .tar

#AddDescription "GZIP compressed tar archive" .tgz

#

# ReadmeName is the name of the README file the server will look for by

# default, and append to directory listings.

#

# HeaderName is the name of a file which should be prepended to

# directory indexes.

#

# The server will first look for name.html and include it if found.

# If name.html doesn't exist, the server will then look for name.txt

# and include it as plaintext if found.

#

ReadmeName README

HeaderName HEADER

#

# IndexIgnore is a set of filenames which directory indexing should
ignore

# and not include in the listing. Shell-style wildcarding is permitted.

#

IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

#

# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+)
uncompress

# information on the fly. Note: Not all browsers support this.

# Despite the name similarity, the following Add* directives have
nothing

# to do with the FancyIndexing customization directives above.

#

AddEncoding x-compress Z

AddEncoding x-gzip gz

#

# AddLanguage allows you to specify the language of a document. You can

# then use content negotiation to give a browser a file in a language

# it can understand. Note that the suffix does not have to be the same

# as the language keyword --- those with documents in Polish (whose

# net-standard language code is pl) may wish to use "AddLanguage pl .po"

# to avoid the ambiguity with the common suffix for perl scripts.

#

AddLanguage en .en

AddLanguage fr .fr

AddLanguage de .de

AddLanguage da .da

AddLanguage el .el

AddLanguage it .it

#

# LanguagePriority allows you to give precedence to some languages

# in case of a tie during content negotiation.

# Just list the languages in decreasing order of preference.

#

LanguagePriority en fr de

#

# AddType allows you to tweak mime.types without actually editing it, or
to

# make certain files to be certain types.

#

# If you have the PHP3 module installed and enabled, these types will

# automatically be enabled.

#

<IfModule mod_php3.c>

AddType application/x-httpd-php3 .php3

AddType application/x-httpd-php3-source .phps

</IfModule>

#Setup mime types for mod_php4

<IfModule mod_php4.c>

AddType application/x-httpd-php .php .php4 .php3

</IfModule>

# The following is for PHP/FI (PHP2):

<IfModule mod_php.c>

AddType application/x-httpd-php .phtml

</IfModule>

#

# AddHandler allows you to map certain file extensions to "handlers",

# actions unrelated to filetype. These can be either built into the
server

# or added with the Action command (see below)

#

# If you want to use server side includes, or CGI outside

# ScriptAliased directories, uncomment the following lines.

#

# To use CGI scripts:

#

#AddHandler cgi-script .cgi

#

# To use server-parsed HTML files

#

AddType text/html .shtml

AddHandler server-parsed .shtml

#

# Uncomment the following line to enable Apache's send-asis HTTP file

# feature

#

#AddHandler send-as-is asis

#

# If you wish to use server-parsed imagemap files, use

#

AddHandler imap-file map

#

# To enable type maps, you might want to use

#

#AddHandler type-map var

# The following section will be enabled automatically if you have

# mod_perl installed and enabled.

#

<IfModule mod_perl.c>

Alias /perl/ /home/httpd/perl/

<Location /perl>

SetHandler perl-script

PerlHandler Apache::Registry

PerlSendHeader On

Options +ExecCGI

</Location>

</IfModule>

#

# Action lets you define media types that will execute a script whenever

# a matching file is called. This eliminates the need for repeated URL

# pathnames for oft-used CGI file processors.

# Format: Action media/type /cgi-script/location

# Format: Action handler-name /cgi-script/location

#

#

# MetaDir: specifies the name of the directory in which Apache can find

# meta information files. These files contain additional HTTP headers

# to include when sending the document

#

#MetaDir .web

#

# MetaSuffix: specifies the file name suffix for the file containing the

# meta information.

#

#MetaSuffix .meta

#

# Customizable error response (Apache style)

# these come in three flavors

#

# 1) plain text

#ErrorDocument 500 "The server made a boo boo.

# n.b. the (") marks it as text, it does not get output

#

# 2) local redirects

#ErrorDocument 404 /missing.html

# to redirect to local URL /missing.html

#ErrorDocument 404 /cgi-bin/missing_handler.pl

# N.B.: You can redirect to a script or a document using
server-side-includes.

#

# 3) external redirects

#ErrorDocument 402 http://some.other_server.com/subscription_info.html

# N.B.: Many of the environment variables associated with the original

# request will *not* be available to such a script.

#

# The following directives modify normal HTTP response behavior.

# The first directive disables keepalive for Netscape 2.x and browsers
that

# spoof it. There are known problems with these browser implementations.

# The second directive is for Microsoft Internet Explorer 4.0b2

# which has a broken HTTP/1.1 implementation and does not properly

# support keepalive when it is used on 301 or 302 (redirect) responses.

#

BrowserMatch "Mozilla/2" nokeepalive

BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0

#

# The following directive disables HTTP/1.1 responses to browsers which

# are in violation of the HTTP/1.0 spec by not being able to grok a

# basic 1.1 response.

#

BrowserMatch "RealPlayer 4\.0" force-response-1.0

BrowserMatch "Java/1\.0" force-response-1.0

BrowserMatch "JDK/1\.0" force-response-1.0

#

# Allow server status reports, with the URL of
http://servername/server-status

# Change the ".your_domain.com" to match your domain to enable.

#

#<Location /server-status>

# SetHandler server-status

# Order deny,allow

# Deny from all

# Allow from .your_domain.com

#</Location>

#

# Allow remote server configuration reports, with the URL of

# http://servername/server-info (requires that mod_info.c be loaded).

# Change the ".your_domain.com" to match your domain to enable.

#

#<Location /server-info>

# SetHandler server-info

# Order deny,allow

# Deny from all

# Allow from .your_domain.com

#</Location>

# Allow access to local system documentation from localhost

Alias /doc /usr/doc

<Directory /usr/doc>

order deny,allow

deny from all

allow from localhost

Options FollowSymLinks

</Directory>

Alias /horde /usr/share/horde

<Directory /usr/share/horde>

DirectoryIndex index.html index.php3 index.htm index.shtml index.cgi

<IfModule mod_php3.c>

php3_magic_quotes_gpc Off

</IfModule>

</Directory>

#

# There have been reports of people trying to abuse an old bug from
pre-1.1

# days. This bug involved a CGI script distributed as a part of Apache.

# By uncommenting these lines you can redirect these attacks to a
logging

# script on phf.apache.org. Or, you can record them yourself, using the
script

# support/phf_abuse_log.cgi.

#

#<Location /cgi-bin/phf*>

# Deny from all

# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi

#</Location>

#

# Proxy Server directives. Uncomment the following lines to

# enable the proxy server:

#

#<IfModule mod_proxy.c>

#ProxyRequests On

#

#<Directory proxy:*>

# Order deny,allow

# Deny from all

# Allow from .your_domain.com

#</Directory>

#

# Enable/disable the handling of HTTP/1.1 "Via:" headers.

# ("Full" adds the server version; "Block" removes all outgoing Via:
headers)

# Set to one of: Off | On | Full | Block

#

#ProxyVia On

#

# To enable the cache as well, edit and uncomment the following lines:

# (no cacheing without CacheRoot)

#

#CacheRoot /var/cache/httpd

#CacheSize 5

#CacheGcInterval 4

#CacheMaxExpire 24

#CacheLastModifiedFactor 0.1

#CacheDefaultExpire 1

#NoCache a_domain.com another_domain.edu joes.garage_sale.com

#</IfModule>

# End of proxy directives.

### Section 3: Virtual Hosts

#

# VirtualHost: If you want to maintain multiple domains/hostnames on
your

# machine you can setup VirtualHost containers for them.

# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>;

# for further details before you try to setup virtual hosts.

# You may use the command line option '-S' to verify your virtual host

# configuration.

#

# If you want to use name-based virtual hosts you need to define at

# least one IP address (and port number) for them.

#

#NameVirtualHost 12.34.56.78:80

NameVirtualHost 24.45.214.23:80

#

# VirtualHost example:

# Almost any Apache directive may go into a VirtualHost container.

#

#<VirtualHost ip.address.of.host.some_domain.com>

# ServerAdmin webmaster@host.some_domain.com

# DocumentRoot /www/docs/host.some_domain.com

# ServerName host.some_domain.com

# ErrorLog logs/host.some_domain.com-error_log

# CustomLog logs/host.some_domain.com-access_log common

#</VirtualHost>

#<VirtualHost _default_:*>

#</VirtualHost>

##

## SSL Global Context

##

## All SSL configuration in this context applies both to

## the main server and all SSL-enabled virtual hosts.

##

#

# Some MIME-types for downloading Certificates and CRLs

#

<IfDefine SSL>

AddType application/x-x509-ca-cert .crt

AddType application/x-pkcs7-crl .crl

</IfDefine>

<IfModule mod_ssl.c>

# Pass Phrase Dialog:

# Configure the pass phrase gathering process.

# The filtering dialog program (`builtin' is a internal

# terminal dialog) has to provide the pass phrase on stdout.

SSLPassPhraseDialog builtin

# Inter-Process Session Cache:

# Configure the SSL Session Cache: First either `none'

# or `dbm:/path/to/file' for the mechanism to use and

# second the expiring timeout (in seconds).

SSLSessionCache dbm:/var/cache/ssl_scache

SSLSessionCacheTimeout 300

# Semaphore:

# Configure the path to the mutual explusion semaphore the

# SSL engine uses internally for inter-process synchronization.

SSLMutex file:/var/run/ssl_mutex

# Pseudo Random Number Generator (PRNG):

# Configure one or more sources to seed the PRNG of the

# SSL library. The seed data should be of good random quality.

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

#SSLRandomSeed startup file:/dev/random 512

#SSLRandomSeed startup file:/dev/urandom 512

#SSLRandomSeed connect file:/dev/random 512

#SSLRandomSeed connect file:/dev/urandom 512

# Logging:

# The home of the dedicated SSL protocol logfile. Errors are

# additionally duplicated in the general error log file. Put

# this somewhere where it cannot be used for symlink attacks on

# a real server (i.e. somewhere where only root can write).

# Log levels are (ascending order: higher ones include lower ones):

# none, error, warn, info, trace, debug.

SSLLog logs/ssl_engine_log

SSLLogLevel warn

</IfModule>

<IfDefine SSL.default>

##

## SSL Virtual Host Context

##

<VirtualHost 24.45.214.23:443>

# General setup for the virtual host

DocumentRoot /home/httpd/html

ServerName andromeda.mine.nu

ServerAdmin root@andromeda.mine.nu

ErrorLog /var/log/httpd/error_log-ssl

TransferLog /var/log/httpd/access_log-ssl

# SSL Engine Switch:

# Enable/Disable SSL for this virtual host.

SSLEngine on

# SSL Cipher Suite:

# List the ciphers that the client is permitted to negotiate.

# See the mod_ssl documentation for a complete list.

#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:

# Point SSLCertificateFile at a PEM encoded certificate. If

# the certificate is encrypted, then you will be prompted for a

# pass phrase. Note that a kill -HUP will prompt again. A test

# certificate can be generated with `make certificate' under

# built time.

SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt

# Server Private Key:

# If the key is not combined with the certificate, use this

# directive to point at the key file.

SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key

# Certificate Authority (CA):

# Set the CA certificate verification path where to find CA

# certificates for client authentication or alternatively one

# huge file containing all of them (file must be PEM encoded)

# Note: Inside SSLCACertificatePath you need hash symlinks

# to point to the certificate files. Use the provided

# Makefile to update the hash symlinks after changes.

#SSLCACertificatePath /etc/httpd/conf/ssl.crt

#SSLCACertificateFile /etc/httpd/conf/ssl.crt/ca-bundle.crt

# Client Authentication (Type):

# Client certificate verification type and depth. Types are

# none, optional, require and optional_no_ca. Depth is a

# number which specifies how deeply to verify the certificate

# issuer chain before deciding the certificate is not valid.

#SSLVerifyClient require

#SSLVerifyDepth 10

# Access Control:

# With SSLRequire you can do per-directory access control based

# on arbitrary complex boolean expressions containing server

# variable checks and other lookup directives. The syntax is a

# mixture between C and Perl. See the mod_ssl documentation

# for more details.

#<Location />

#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \

# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \

# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \

# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \

# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \

# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/

#</Location>

# SSL Engine Options:

# Set various options for the SSL engine.

# FakeBasicAuth:

# Translate the client X.509 into a Basic Authorisation. This means that

# the standard Auth/DBMAuth methods can be used for access control. The

# user name is the `one line' version of the client's X.509 certificate.

# Note that no password is obtained from the user. Every entry in the
user

# file needs this password: `xxj31ZMTZzkVA'.

# ExportCertData:

# This exports two additional environment variables: SSL_CLIENT_CERT and

# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the

# server (always existing) and the client (only existing when client

# authentication is used). This can be used to import the certificates

# into CGI scripts.

# CompatEnvVars:

# This exports obsolete environment variables for backward compatibility

# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use
this

# to provide compatibility to existing CGI scripts.

#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars

# SSL Protocol Adjustments:

# The safe and default but still SSL/TLS standard compliant shutdown

# approach is that mod_ssl sends the close notify alert but doesn't wait
for

# the close notify alert from client. When you need a different shutdown

# approach you can use one of the following variables:

# ssl-unclean-shutdown:

# This forces an unclean shutdown when the connection is closed, i.e. no

# SSL close notify alert is send or allowed to received. This violates

# the SSL/TLS standard but is needed for some brain-dead browsers. Use

# this when you receive I/O errors because of the standard approach
where

# mod_ssl sends the close notify alert.

# ssl-accurate-shutdown:

# This forces an accurate shutdown when the connection is closed, i.e. a

# SSL close notify alert is send and mod_ssl waits for the close notify

# alert of the client. This is 100% SSL/TLS standard compliant, but in

# practice often causes hanging connections with brain-dead browsers.
Use

# this only for browsers where you know that their SSL implementation

# works correctly.

# Notice: Most problems of broken clients are also related to the HTTP

# keep-alive facility, so you usually additionally want to disable

# keep-alive for those clients, too. Use variable "nokeepalive" for
this.

SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown

# Per-Server Logging:

# The home of a custom SSL log file. Use this when you want a

# compact non-error SSL logfile on a virtual host basis.

#CustomLog /var/log/httpd/ssl_request_log \

# "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

</IfDefine>

# Webalizer location

# customize to allow other hosts than just the localhost

# access to the web analysis log files if you wish

<Location /html/usage>

Order deny,allow

Deny from all

Allow from localhost

</Location>

# Apache JServ

<IfModule mod_jserv.c>

Include /etc/httpd/conf/jserv.conf

</IfModule>

# Netscape Roaming

<IfModule mod_roaming.c>

Include /etc/httpd/conf/roaming.conf

</IfModule>

# Apache ASP

# You need not only mod_perl to be installed, but also

# perl-Apache-ASP and related perl modules. When this is

# done, you may uncomment the following and customize the

# ASP configuration file.

#<IfModule mod_perl.c>

# Include /etc/httpd/conf/asp.conf

#</IfModule>

# MailMan

# If you have Mailman, the mailing list manager package

# installed, uncomment these lines to enable mailman functionality.

#ScriptAlias /mailman/ /usr/share/mailman/cgi-bin/

#Alias /pipermail/ /usr/share/mailman/archives/public/

<VirtualHost 24.45.214.23:80>

<Directory /home/virtual/*/home/httpd/cgi-bin>

Options +ExecCGI

</Directory>

<Directory /home/virtual/*/home/httpd/html>

AddType text/html .html .htm .shtml

AddHandler server-parsed .html .htm .shtml

Options +Includes +ExecCGI

</Directory>

RewriteEngine On

RewriteRule ^/~([^/]+)/cgi-bin/(.*)
/home/virtual/$1/home/httpd/cgi-bin/$2
[T=application/x-httpd-cgi,L]

RewriteRule ^/~([^/]+)/(.*) /home/virtual/$1/home/httpd/html/$2

ScriptAliasMatch ^/~([^/]+)/cgi-bin/(.*)
/home/virtual/$1/home/httpd/cgi-bin/$2

<Directory /home/httpd/html/>

Options Includes FollowSymLinks

DirectoryIndex index.shtml index.html index.php

</Directory>

</VirtualHost>

# Include all the virtual host config files

Include /etc/httpd/conf/virtual



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000201c1642f$6497e040$0100a8c0>

Header And Logo

Peripheral Links

Site Navigation

Header And Logo

Peripheral Links

Search

Site Navigation