Date: Wed, 31 May 2000 03:04:43 -0400 (EDT) From: "Brandon D. Valentine" <bandix@looksharp.net> To: FreeBSD-STABLE <FreeBSD-STABLE@FreeBSD.ORG> Subject: Problems with xe driver under 4.0-RELEASE Message-ID: <Pine.BSF.4.21.0005310248440.5176-100000@turtle.looksharp.net>
next in thread | raw e-mail | index | archive | help
Hey, I'm having trouble getting the xe driver to load for my Intel
EtherExpress PRO/100 16 bit PCMCIA card. I know next to nothing about
PCMCIA as a technology and don't know what to make of "Can't map in
cis". I gathered from the manpages that cis is card information
services, but I am not sure what it is that the driver is failing on.
Perhaps someone with a better understanding of the lower level process
of inserting a pccard and the code internals of the xe driver can lend
some insight. Warner perhaps? I'd appreciate any insight you guys can
offer. I can take diffs over on a floppy disk and try to repair it that
way, but sneakernet is my only option at this point until I get that
PCMCIA NIC working. Here are the relevant system messages:
# uname -sr
FreeBSD 4.0-RELEASE
# tail -n 4 /var/log/messages
May 31 01:33:15 hostname /kernel: pccard: card inserted, slot 0
May 31 01:33:25 hostname /kernel: xe1: xe: Probing
May 31 01:33:25 hostname /kernel: xe1: Can't map in cis
May 31 01:33:25 hostname pccardd[50]: driver allocation failed for
Intel(EtherExpress(TM) PRO/100 PC Card Mobile Adapter16): Device not
configured
# pccardc dumpcis 0
Code 136 not found
Code 136 not found
code Unknown ignored
code Manufacturer ID ignored
Code 138 not found
Code 138 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 77
000: 05 00 49 6e 74 65 6c 00 45 74 68 65 72 45 78 70
010: 72 65 73 73 28 54 4d 29 20 50 52 4f 2f 31 30 30
020: 20 50 43 20 43 61 72 64 20 4d 6f 62 69 6c 65 20
030: 41 64 61 70 74 65 72 31 36 00 50 52 4f 2f 31 30
040: 30 20 4d 31 36 41 00 31 2e 30 30 00 ff
Version = 5.0, Manuf = [Intel],card vers = [EtherExpress(TM) PRO/100
PC Card Mobile Adapter16]
Addit. info = [PRO/100 M16A],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: 00 e3 7a 00 00 00 00 00
Tuple #5, code = 0x0 (Null tuple), length = 5
000: 89 00 0a 01 43
Tuple #6, code = 0x44 (Card init date), length = 4
000: 6e 90 64 25
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 01 00 08 03
Reg len = 2, config register addr = 0x800, last config = 0x1
Registers: XX------
Tuple #8, code = 0x1b (Configuration entry), length = 25
000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60
010: 00 00 0f 70 bc 8e 10 00 20
Config index = 0x1(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 3.5 x 100mA
Max current average over 1 second: 4 x 100mA
Max current average over 10 ms: 4 x 100mA
Power down supply current: 1 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 23 address lines
IRQ modes:
IRQs: NMI IOCK BERR 0 1 2 4 8 9 10 12
Memory space length = 0x60
Max twin cards = 0
Misc attr:
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 a0 c9 7a e3 28
Voice services available:
Tuple #11, code = 0x22 (Functional EXT), length = 2
000: 01 02
Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 5
000: 02 80 96 98 00
Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 5
000: 02 00 e1 f5 05
Data modem services available:
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 03 01
Tuple #15, code = 0x22 (Functional EXT), length = 2
000: 03 03
Tuple #16, code = 0x22 (Functional EXT), length = 2
000: 05 00
Modem interface capabilities:
Tuple #17, code = 0x0 (Null tuple), length = 12
000: 34 30 30 32 36 46 37 41 45 33 32 38
Tuple #18, code = 0xff (Terminator), length = 0
2 slots found
Brandon D. Valentine
--
"You should believe in death, taxes, Larry Ellison's loathing of Bill
Gates and Intel's inability to ship a working chipset."
- Dr Spinola, The Register, 05/13/2000
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0005310248440.5176-100000>