From owner-freebsd-stable Wed Feb 10 11:02:26 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA04243 for freebsd-stable-outgoing; Wed, 10 Feb 1999 11:02:26 -0800 (PST) (envelope-from owner-freebsd-stable@FreeBSD.ORG) Received: from hub.lovett.com (hub.lovett.com [38.155.241.2]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA04238 for ; Wed, 10 Feb 1999 11:02:24 -0800 (PST) (envelope-from ade@lovett.com) Received: from ade by hub.lovett.com with local (Exim 2.10 #1) id 10Aety-0003VH-00 for stable@freebsd.org; Wed, 10 Feb 1999 13:02:22 -0600 To: stable@FreeBSD.ORG Subject: More 3.0-STABLE woes Message-Id: From: Ade Lovett Date: Wed, 10 Feb 1999 13:02:22 -0600 Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Add another one to the spontaneous reboots for 3.0-STABLE Machine (512Mb dual Xeon/400) was fresh installed with 3.0-RELEASE, cvsup to RELENG_3 as of 1900 CST 02/09/1999. Everything went fine during the build, with no problems encountered, but since rebooting into 3.0-STABLE, I'm experiencing effectively random crashes. However, I can reproduce the problem completely by launching enlightenment/gnome as my window manager. Backtrace looks a little screwy, even when I install the debug-full kernel without saving/stripping it.. machine has 512Mb of RAM and a 768Mb swap partition. System board is a Supermicro P6DGH with MPP level set to 1.1 in the BIOS - setting it to 1.4 prevents the machine from booting at all. Suggestions? -aDe --------------------------------------------------------------------------- -rw-r--r-- 1 root wheel 8103595 Feb 10 12:43 /var/crash/kernel.0 -rw------- 1 root wheel 536870912 Feb 10 12:43 /var/crash/vmcore.0 --------------------------------------------------------------------------- GDB is free software and you are welcome to distribute copies of it under certain conditions; type "show copying" to see the conditions. There is absolutely no warranty for GDB; type "show warranty" for details. GDB 4.16 (i386-unknown-freebsd), Copyright 1996 Free Software Foundation, Inc... IdlePTD 2928640 initial pcb at 24d2e0 panicstr: isa_dmacheck: no physical page present panic messages: --- dmesg: kernel message buffer has different magic number --- #0 boot (howto=Cannot access memory at address 0xfc1fbcc4. ) at ../../kern/kern_shutdown.c:285 285 dumppcb.pcb_cr3 = rcr3(); (kgdb) --------------------------------------------------------------------------- Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-STABLE #0: Wed Feb 10 12:37:53 CST 1999 root@banzai.lovett.com:/usr/src/sys/compile/BANZAI-SMP Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Xeon/Celeron (686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping=2 Features=0x183fbff> real memory = 536870912 (524288K bytes) avail memory = 519663616 (507484K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xf02c1000. Probing for devices on PCI bus 0: chip0: rev 0x00 on pci0.0.0 chip1: rev 0x00 on pci0.1.0 chip2: rev 0x02 on pci0.4.0 chip3: rev 0x02 on pci0.4.3 chip4: rev 0x03 on pci0.12.0 ahc0: rev 0x00 int a irq 16 on pci0.14.0 ahc0: aic7896/97 Wide Channel A, SCSI Id=7, 16/255 SCBs ahc1: rev 0x00 int a irq 16 on pci0.14.1 ahc1: aic7896/97 Wide Channel B, SCSI Id=7, 16/255 SCBs vga0: rev 0x01 int a irq 17 on pci0.16.0 de0: rev 0x22 int a irq 18 on pci0.18.0 de0: 21140A [10-100Mb/s] pass 2.2 de0: address 00:40:05:a3:cb:29 de1: rev 0x22 int a irq 19 on pci0.20.0 de1: 21140A [10-100Mb/s] pass 2.2 de1: address 00:40:05:37:26:be Probing for devices on PCI bus 1: Probing for devices on PCI bus 2: Probing for PnP devices: CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x07eb459a Comp ID: PNPb02f [0x2fb0d041] pcm1 (SB16pnp sn 0x07eb459a) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A pcm0 not found fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa isa_dmainit(2, 1024) failed fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.2 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging limited to 100 packets/entry IP Filter: initialized. Default = pass all, Logging = enabled Waiting 2 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! de0: enabling 100baseTX port de1: enabling Full Duplex 100baseTX port changing root device to da0s1a da0 at ahc0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C) WARNING: / was not properly dismounted cd0 at ahc1 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 20.0MB/s transfers (20.0MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present --------------------------------------------------------------------------- # BANZAI-SMP: Dual Xeon/400 workstation # machine "i386" ident BANZAI-SMP maxusers 256 cpu "I686_CPU" config kernel root on da0 options PQ_NOOPT options SMP options APIC_IO options "NO_F00F_HACK" options "COMPAT_43" options USER_LDT options SYSVSHM options SYSVSEM options SYSVMSG options "MD5" options KTRACE options PERFMON options UCONSOLE options INET options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_FORWARD options "IPFIREWALL_VERBOSE_LIMIT=100" options IPDIVERT options IPFILTER options IPFILTER_LOG options "ICMP_BANDLIM" options FFS options NFS options "CD9660" options PROCFS options FFS_ROOT options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" options "AUTO_EOI_1" pseudo-device ether pseudo-device loop pseudo-device bpfilter 4 pseudo-device pty 256 pseudo-device gzip pseudo-device vn pseudo-device splash controller scbus0 device da0 device cd0 controller isa0 controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device vga0 at isa? port ? conflicts device sc0 at isa? tty device npx0 at isa? port IO_NPX irq 13 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 device sio0 at isa? port "IO_COM1" tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device apm0 at isa? controller pnp0 device pcm0 at isa? port ? tty irq ? drq ? controller pci0 controller ahc0 device de0 controller ppbus0 device nlpt0 at ppbus? --------------------------------------------------------------------------- -- Ade Lovett, Austin, TX. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message