Date: Mon, 15 May 2000 23:18:37 -0700 (PDT) From: william.ward@ericsson.com To: freebsd-gnats-submit@FreeBSD.org Subject: i386/18586: ep0: No irq?! reported when using PAO and 3Com Megahertz 589E Message-ID: <20000516061837.41F9137B787@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 18586
>Category: i386
>Synopsis: ep0: No irq?! reported when using PAO and 3Com Megahertz 589E
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon May 15 23:20:01 PDT 2000
>Closed-Date:
>Last-Modified:
>Originator: William Ward
>Release: 4.0 RELEASE
>Organization:
Ericsson, Inc.
>Environment:
FreeBSD lappy.exu.ericsson.se 4.0-RELEASE FreeBSD 4.0-RELEASE #4: Mon May 15 22:48:07 CDT 2000 root@lappy.exu.ericsson.se:/usr/src/sys/compile/LAPPY i386
>Description:
Hardware:
Toshiba Tecra 8000
PCMCIA:
3CXM556 Cellular Modem
3CXE589ET 10 Mbps network interface
/etc/pccard.conf:
# Sample PCCARD configuration file
#
# Removing all IRQ conflicts from this file can't be done because of some
# IRQ-selfish PC-cards. So if you want to use some of these cards in
# your machine, you will be forced to modify their IRQ parameters from
# the following list.
#
# IRQ == 0 means "allocate free IRQ from IRQ pool"
# IRQ == 16 means "do not use IRQ (e.g. PIO mode)"
#
# $FreeBSD: src/etc/pccard.conf.sample,v 1.90 2000/03/11 20:23:34 imp Exp $
#
# Send new entries for this file to imp@freebsd.org. He's volunteered
# to act as coordinator for this file.
#
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 10 3
# Available memory slots
memory 0xd4000 96k
# 3Com Etherlink III 3CXE589ET
card "3Com" "Megahertz 589E"
# config 0x1 "ep0" ?
config auto "ep0" 10
insert logger -t pccard:$device -s 3Com 3C589E inserted
insert /etc/pccard_ether $device
remove logger -t pccard:$device -s 3Com 3C589E removed
remove /sbin/ifconfig $device delete
# 3com/USR/Megahertz 3CCM556
card "3Com" "3CXM/3CCM556"
config 0x23 "sio2" 3
insert logger -t pccard:$device -s 3Com PCMCIA 56K Modem inserted
remove logger -t pccard:$device -s 3Com PCMCIA 56K Modem removed
CIS for both slots:
Code 128 not found
Code 128 not found
code Unknown ignored
Code 131 not found
Code 131 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 56
000: 04 01 33 43 6f 6d 00 33 43 58 4d 2f 33 43 43 4d
010: 35 35 36 00 4d 65 67 61 68 65 72 74 7a 20 35 36
020: 4b 20 43 65 6c 6c 2f 54 65 6c 65 70 68 6f 6e 79
030: 20 4d 6f 64 65 6d 00 ff
Version = 4.1, Manuf = [3Com],card vers = [3CXM/3CCM556]
Addit. info = [Megahertz 56K Cell/Telephony Modem]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 34 00
PCMCIA ID = 0x101, OEM ID = 0x34
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 23 00 03 03
Reg len = 2, config register addr = 0x300, last config = 0x23
Registers: XX------
Tuple #6, code = 0x1b (Configuration entry), length = 16
000: e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28
Config index = 0x20(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 100mA
Power down supply current: 3.5 x 10mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level
IRQs: 4 5 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 21 08 aa 60 f8 02 07
Config index = 0x21
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 22 08 aa 60 e8 03 07
Config index = 0x22
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 23 08 aa 60 e8 02 07
Config index = 0x23
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #10, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 7c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #11, code = 0x22 (Functional EXT), length = 9
000: 01 1f 0f 00 06 00 00 06 00
Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 02 b5
Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 0f 00 02 00 b5
Tuple #14, code = 0x22 (Functional EXT), length = 8
000: 23 06 00 0f 00 02 00 b5
Tuple #15, code = 0x0 (Null tuple), length = 10
000: 02 01 34 00 2d 00 05 00 00 ff
Tuple #16, code = 0x0 (Null tuple), length = 14
000: 31 30 43 42 31 43 37 39 33 33 52 43 00 ff
Tuple #17, code = 0x14 (No link), length = 0
Tuple #18, code = 0xff (Terminator), length = 0
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 89 05
PCMCIA ID = 0x101, OEM ID = 0x589
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 46
000: 04 01 33 43 6f 6d 00 4d 65 67 61 68 65 72 74 7a
010: 20 35 38 39 45 00 54 50 2f 42 4e 43 20 4c 41 4e
020: 20 50 43 20 43 61 72 64 00 30 30 35 00 ff
Version = 4.1, Manuf = [3Com],card vers = [Megahertz 589E]
Addit. info = [TP/BNC LAN PC Card],[005]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 20
000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff 80
010: 80 80 80 0f
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 7.0 x 100 ns
Card decodes 18 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: IOCK 1 4 5 6 8 10 11 12 14
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 03 01 71 55 26 26 54
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0x10 (Checksum), length = 5
000: 8f ff 7a 00 00
Checksum from offset -113, length 122, value is 0x0
Tuple #12, code = 0xff (Terminator), length = 243
000: 00 03 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
090: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0f0: ff ff ff
2 slots found
kernel config:
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.freebsd.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $
machine i386
#cpu I386_CPU
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident LAPPY
maxusers 64
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
#options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
#options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
#options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options USER_LDT #allow user-level control of i386 ldt
options DDB
options SOFTUPDATES
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device amd # AMD 53C974 (Teckram DC-390(T))
#device dpt # DPT Smartcache - See LINT for options!
#device isp # Qlogic family
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
#pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x20 # Advanced Power Management
#device smbus # Bus support, required for smb below.
#device intpm
#device alpm
#device smb
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
#device sio1 at isa? port IO_COM2 irq 3
#device sio2 at isa? disable port IO_COM3 irq 5
#device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device tx # SMC 9432TX (83c170 ``EPIC'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
#device wx # Intel Gigabit Ethernet Card (``Wiseman'')
# PCI Ethernet NICs that use the common MII bus controller code.
#device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs.
#device ed0 at isa? port 0x280 irq 10 iomem 0xd8000
#device ex
device ep
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attatement needed
# and resources will always be dynamically assigned by the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those paremeters here.
#device an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
#device ie0 at isa? port 0x300 irq 10 iomem 0xd0000
#device fe0 at isa? port 0x300
#device le0 at isa? port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? port 0x280 irq 10 drq 0
#device cs0 at isa? port 0x300
#device sn0 at isa? port 0x300 irq 10
# requires PCCARD (PCMCIA) support to be activated
##device xe0 at isa?
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
#pseudo-device gif 4 # IPv6 and IPv4 tunneling
#pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# For PnP/PCI sound cards
#device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0
device pcm0 at isa? irq 5 drq 1 flags 0x0
dmesg output:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon May 15 23:56:04 CDT 2000
wardd@lappy.exu.ericsson.se:/usr/src/sys/compile/NEWCARD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126361600 (123400K bytes)
Preloaded elf kernel "kernel" at 0xc0395000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0 at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic ident regs: 0x83 0x83 0xff 0xff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic_attach_card h 0xc09d995c h->dev 0xc09d7580
pccard1: pccard_card_attach
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Uptime: 0s
Rebooting...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #4: Mon May 15 22:48:07 CDT 2000
root@lappy.exu.ericsson.se:/usr/src/sys/compile/LAPPY
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 399922960 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126935040 (123960K bytes)
Preloaded elf kernel "kernel.old" at 0xc02fb000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
pcm0: <OPL3-SAx (YMF719)> at port 0x530-0x537,0x538-0x539 irq 5 drq 1 flags 0xc100 on isa0
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 13481MB <IBM-DCYA-214000> [27390/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2102> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s1a
sio2 at port 0x2e8-0x2ef irq 3 slot 0 on pccard0
sio2: type 16550A
ep0: No irq?!
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 12 1
done
Uptime: 43m27s
The operating system has halted.
Please press any key to reboot.
Rebooting...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon May 15 23:56:04 CDT 2000
wardd@lappy.exu.ericsson.se:/usr/src/sys/compile/NEWCARD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126361600 (123400K bytes)
Preloaded elf kernel "kernel" at 0xc0395000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0 at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic ident regs: 0x83 0x83 0xff 0xff
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic_attach_card h 0xc09d9848 h->dev 0xc09d7580
pccard0: pccard_card_attach
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x128
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc0160d96
stack pointer = 0x10:0xc03a9b08
frame pointer = 0x10:0xc03a9b10
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
Uptime: 0s
Rebooting...
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #4: Mon May 15 22:48:07 CDT 2000
root@lappy.exu.ericsson.se:/usr/src/sys/compile/LAPPY
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 399923122 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126935040 (123960K bytes)
Preloaded elf kernel "kernel.old" at 0xc02fb000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicMedia 256AV SVGA controller> at 4.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at device 5.3 on pci0
chip2: <Toshiba Fast Infra Red controller> port 0xff80-0xff9f irq 11 at device 9.0 on pci0
pcic-pci0: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
pcic-pci1: <Toshiba ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
pci0: <unknown card> (vendor=0x123f, dev=0x8888) at 13.0 irq 11
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
pcm0: <OPL3-SAx (YMF719)> at port 0x530-0x537,0x538-0x539 irq 5 drq 1 flags 0xc100 on isa0
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 13481MB <IBM-DCYA-214000> [27390/16/63] at ata0-master using UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2102> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s1a
fd0c: hard error reading fsbn 0 of 0-3 (No status)
sio2 at port 0x2e8-0x2ef irq 3 slot 0 on pccard0
sio2: type 16550A
ep0: No irq?!
>How-To-Repeat:
It might be presumed that the same hardware and software versioning and configuration would produce the same results.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000516061837.41F9137B787>