Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 28 Aug 2000 00:18:04 -0600 (MDT)
From:      John Galt <galt@inconnu.isu.edu>
To:        Tony Johnson <gjohnson@gs.verio.net>
Cc:        Josh Paetzel <jpaetzel@hutchtel.net>, Scott Myron <scottie@scottsburg.com>, freebsd-questions@FreeBSD.ORG
Subject:   Re: FreeBSD is being extremely slow..
Message-ID:  <Pine.LNX.4.21.0008280017320.7470-100000@inconnu.isu.edu>
In-Reply-To: <39A9F070.C07BD9C@gs.verio.net>

next in thread | previous in thread | raw e-mail | index | archive | help



On Sun, 27 Aug 2000, Tony Johnson wrote:

> BitchX is not a diagnostic utility.  Neither is Netscape.  You are also
> overclocking the computer.  I am not a believer that CPU speed = "a
> faster computer"  Secondly you have 2 nics in the box.  If your computer
> is not a router or a gateway, why do you have 2 nics in the box?? 
> Socks.nec.com has info about running a multi-homes system. Why does your
> box have 2 nics??  Strip your computer down to bare essentials and then
> re-run your tests.
> 
> 
> 
> Josh Paetzel wrote:
> > 
> > ----- Original Message -----
> > From: "Scott Myron" <scottie@scottsburg.com>
> > To: <freebsd-questions@FreeBSD.ORG>
> > Sent: Sunday, August 27, 2000 10:22 PM
> > Subject: FreeBSD is being extremely slow..
> > 
> > Hello. I have an Athlon 650@715 w/ 128MB of ram. It's fast. Things are
> > generally fast. However I'm having a few problems.
> > 
> > First let me say, I had this hard drive in a Celeron 333. I then moved it to
> > the Athlon, and upgraded(via cvsup) from 4.0-current to 4.1-stable. The make
> > world was fine. No problems, other than softupdates(where did it go?!?).
> > 
> > Ok anyway, now these are the problems. I'm using XFree86 4.0 w/ a
> > GeForce256. I installed the binaries. Everything is fine, however, netscape
> > takes FOREVER(read: 2 to 3 minutes) to load. So does Licq. Also, in the
> > console, BitchX takes a long time to load. After about 1 or 2 minutes, it
> > finally loads.
> > 
> > I would guess that something is using up all of your memory.  Check top or
> > ps -aux and see how much memory you have free while you are trying to load
> > netscape.  I am guessing that you are digging way into swap.
> > 
> > Problem #2 has to do with my NIC. I've got 2 NIC's of different brands. They
> > do, however, use the same device in the kernel, dc0. One of them is the
> > Linksys LNE100TX, and the other is some CNET card.(macronix i think). The
> > CNET card works perfectly. The Linksys is connected to my DSL. I have a
> > problem downloading files. It will download part of the file, then stop. For
> > example, I was downloading cvsup from ftp.freesoftware.com. It STOPPED at
> > 480k. It goes about 20-60k/sec, then stops. It does this using "ftp" or
> > netscape. It also did it with BitchX(but i'm not sure if it stopped at
> > 480k). When I tried to cvsup, it would go for a while, then stop. I then
> > connected my DSL to my CNET card, and everything worked fine. I'd really
> > like to know what's going on though, because I moved my DSL back to the
> > Linksys.
> > 
> > I have 2 or 3 of the LNE100TX cards and I haven't had very good luck with
> > them under win98 or FreeBSD.  I would recommend getting another CNET.
> > 
> > Josh
> > 
> > Thanks in advance for any help.
> > 
> > Scott Myron
> > 
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-questions" in the body of the message
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 

-- 
The Internet must be a medium for it is neither Rare nor Well done!
<a href="mailto:galt@inconnu.isu.edu">John Galt </a>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.21.0008280017320.7470-100000>