Date: Tue, 11 Mar 1997 16:21:30 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: raj@cisco.com Cc: freebsd-questions@freebsd.org Subject: Re: Installing using 3COM Etherlink III PCMCIA card Message-ID: <Pine.BSI.3.94.970311162015.2918D-100000@localhost> In-Reply-To: <199703112328.PAA25326@rjohnson-home-ss20.cisco.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 11 Mar 1997 raj@cisco.com wrote: > I'm having some problems getting the installation code to recognize my > 3COM Etherlink III PCMCIA card. I have removed all other devices > which I don't have from the configuration menu and I have set the > IOBase address to 0x210 (which is what the card's diag's say it's set > to) (the IRQ was already at 0xA) and yet it still doesn't appear in > the list of network interfaces when I try to install from an FTP > server. I tried to look quickly at the bootup messages to see if it's > being recognized at all but the screen is cleared so quickly after > printing it that I didn't have time to read the output. Hit "scroll lock" at the main menu and use the up arrow key to read the boot messages. Make sure that zp0 matches the config in 3C589CFG. The interrupt is decimal, not hex. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.970311162015.2918D-100000>