Date: Fri, 3 Jan 2014 22:40:29 -0600 From: Larry Rosenman <ler@lerctr.org> To: freebsd-stable@freebsd.org Subject: Anything here I should worry about? Message-ID: <20140104044029.GA29339@thebighonker.lerctr.org>
next in thread | raw e-mail | index | archive | help
I just bought a new HP DL360 G5, and have FreeBSD 10.0-RC4 (from the
stable branch) running just fine.
However, some of the messages at boot are "interesting", and I wonder
if I should worry or file any PR's or give access...
dmesg:
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-PRERELEASE #0 r260249: Fri Jan 3 19:21:13 CST 2014
root@thebighonker2:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Xeon(R) CPU L5420 @ 2.50GHz (2500.14-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16588226560 (15819 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130823/tbfadt-682)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20130823/tbfadt-682)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
ACPI Warning: \134_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20130823/nsprepkg-137)
pci9: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 1.0 on pci10
pci14: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci10
pci15: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci9
pci16: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci6: <ACPI PCI bus> on pcib7
ciss0: <HP Smart Array P400i> port 0x4000-0x40ff mem 0xfde00000-0xfdefffff,0xfddf0000-0xfddf0fff irq 16 at device 0.0 on pci6
ciss0: PERFORMANT Transport
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci19: <ACPI PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 5.0 on pci0
pci22: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci2: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib11
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci3
bce0: /usr/src/sys/dev/bce/if_bce.c(1251): Management firmware enabled but not running!
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: 00:23:7d:9e:6e:8a
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib13
bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 19 at device 0.0 on pci5
bce1: /usr/src/sys/dev/bce/if_bce.c(1251): Management firmware enabled but not running!
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: 00:23:7d:9e:ed:86
bce1: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib14: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib14
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci1
vgapci0: Boot video device
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
uhci4: <UHCI (generic) USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci1
usbus5 on uhci4
ipmi0: <IPMI System Interface> mem 0xf7ef0000-0xf7ef00ff irq 21 at device 4.6 on pci1
ipmi0: using KSC interface
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xe6000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
Event timer "RTC" frequency 32768 Hz quality 0
ppc0: cannot reserve I/O port range
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est2 attach returned 6
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est4 attach returned 6
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est6 attach returned 6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 4718471806004718
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen4.1: <Intel> at usbus4
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <Intel> at usbus2
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen5.1: <0x103c> at usbus5
uhub5: <0x103c UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ipmi0: IPMI device rev. 1, firmware rev. 2.20, version 2.0
ipmi0: Number of channels 0
ipmi0: Attached watchdog
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
da0: Serial Number PH8BMQ3157
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
da1: Serial Number PH8BMQ3157
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
da2 at ciss0 bus 0 scbus0 target 2 lun 0
da2: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
da2: Serial Number PH8BMQ3157
da2: 135.168MB/s transfers
da2: Command Queueing enabled
da2: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
da3 at ciss0 bus 0 scbus0 target 3 lun 0
da3: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
da3: Serial Number PH8BMQ3157
da3: 135.168MB/s transfers
da3: Command Queueing enabled
da3: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
da4 at ciss0 bus 0 scbus0 target 4 lun 0
da4: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
da4: Serial Number PH8BMQ3157
da4: 135.168MB/s transfers
da4: Command Queueing enabled
da4: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
da5 at ciss0 bus 0 scbus0 target 5 lun 0
da5: <HP RAID 0 OK> Fixed Direct Access SCSI-5 device
da5: Serial Number PH8BMQ3157
da5: 135.168MB/s transfers
da5: Command Queueing enabled
da5: 139980MB (286679925 512 byte sectors: 255H 63S/T 17845C)
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <TEAC DV-28E-V C.AB> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Netvsc initializing... SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/40/0x67<INT,USR,SYS,REA,WRI>
uhub3: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus4
ugen5.2: <HP> at usbus5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
Root mount waiting for: usbus4
uhub2: 8 ports with 8 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
bce0: Gigabit link up!
ums0: <Virtual Mouse> on usbus5
ums0: 3 buttons and [XY] coordinates ID=0
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 214-642-9640 E-Mail: ler@lerctr.org
US Mail: 108 Turvey Cove, Hutto, TX 78634-5688
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140104044029.GA29339>