Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 15 Jan 2007 18:36:20 -0500
From:      Kris Kennaway <kris@obsecurity.org>
To:        Sven Willenberger <sven@dmv.com>
Cc:        Kostik Belousov <kostikbel@gmail.com>, stable@freebsd.org, Kris Kennaway <kris@obsecurity.org>
Subject:   Re: bge panic (Re: Not panic in nfsd (Re: panic in nfsd on 6.2-RC1))
Message-ID:  <20070115233620.GA53399@xor.obsecurity.org>
In-Reply-To: <1168896623.13113.15.camel@lanshark.dmv.com>
References:  <20061215192958.GA86926@xor.obsecurity.org> <20061215212040.GG23698@deviant.kiev.zoral.com.ua> <1166463200.11562.5.camel@lanshark.dmv.com> <4596F06D.30004@dmv.com> <20070113201106.GD66260@xor.obsecurity.org> <1168878813.13113.2.camel@lanshark.dmv.com> <20070115182227.GA30242@xor.obsecurity.org> <1168887808.13113.7.camel@lanshark.dmv.com> <20070115202456.GA31969@xor.obsecurity.org> <1168896623.13113.15.camel@lanshark.dmv.com>

next in thread | previous in thread | raw e-mail | index | archive | help

--J2SCkAp4GZ/dPZZf
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Mon, Jan 15, 2007 at 04:30:23PM -0500, Sven Willenberger wrote:
> On Mon, 2007-01-15 at 15:24 -0500, Kris Kennaway wrote:
> > On Mon, Jan 15, 2007 at 02:03:28PM -0500, Sven Willenberger wrote:
> > > On Mon, 2007-01-15 at 13:22 -0500, Kris Kennaway wrote:
> > > > On Mon, Jan 15, 2007 at 11:33:33AM -0500, Sven Willenberger wrote:
> > > >=20
> > > > > > This is indicating a problem either with your bge hardware or t=
he driver.
> > > > > >=20
> > > > > > Kris
> > > > >=20
> > > > > I suspect the driver: This same hardware setup was being used as a
> > > > > databse server with FreeBSD 5.4. I had been using the bge driver =
but set
> > > > > at base100T without any issue at all. It was when I did a clean i=
nstall
> > > > > of 6.2-Prerelease and setting bge to use the full gigE speed (via
> > > > > autonegotiate) that these issues cropped up.
> > > >=20
> > > > Be careful before you start blaming FreeBSD - since you did not test
> > > > the failing hardware configuration in the older version of FreeBSD =
you
> > > > cannot yet determine that it is a driver regression.
> > > >=20
> > > > Kris
> > >=20
> > > I will freely admit that this may be circumstantial, that the hardware
> > > failed at the same time I upgraded to the newer version of FreeBSD. It
> > > could also be that there is an issue with the bge driver being used w=
ith
> > > 1000 (gigE) speeds instead of at fastE speeds as I used it with the 5=
.4
> > > release (same hardware).
> >=20
> > The latter is what I am referring to.  Your hardware may never have
> > worked in gige mode due to your hardware being broken (yes, this
> > happens), or it could be a freebsd driver issue either introduced in
> > 6.x or present in 5.4 too.  You just haven't ruled these cases out.
> >=20
> > Anyway, since you're happy with your present workaround we'll have to
> > just drop the issue for now.
> >=20
> > Kris
>=20
> As the box in question is now fully production I can no longer "guinea
> pig" it. However, I will attempt to set up a test bed with similar
> hardware and try and push as much traffic through the bge interface at
> gigE speeds as I can in an effort to duplicate this issue. If it does
> crop up, this box should allow me to more effectively provide debugging
> information as it will not be a production unit. Although the current
> workaround is satisfactory for now (and to that extent I am "happy") I
> would much rather have the available headroom of full gigE traffic to
> this server so I would like to see if I can reproduce the error or at
> least find out if it is a hardware issue (if nothing else than for my
> own edification).

OK, let us know how that goes.

Kris

--J2SCkAp4GZ/dPZZf
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (FreeBSD)

iD8DBQFFrA/0Wry0BWjoQKURAuQwAJ9woaWgucWYTNwA2wz3RtUSiLddfgCgrYqk
5VhPdPyBE8wbNMe27fQC/P0=
=CcpV
-----END PGP SIGNATURE-----

--J2SCkAp4GZ/dPZZf--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070115233620.GA53399>