From owner-freebsd-config@FreeBSD.ORG Fri Sep 26 04:37:28 2003 Return-Path: Delivered-To: freebsd-config@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0B68916A4B3 for ; Fri, 26 Sep 2003 04:37:28 -0700 (PDT) Received: from ms-smtp-02.southeast.rr.com (ms-smtp-02.southeast.rr.com [24.93.67.83]) by mx1.FreeBSD.org (Postfix) with ESMTP id BB2F243FCB for ; Fri, 26 Sep 2003 04:37:26 -0700 (PDT) (envelope-from thawes@althusius.net) Received: from althusius.homeunix.net (rdu74-154-012.nc.rr.com [24.74.154.12]) h8QBXXjC015034 for ; Fri, 26 Sep 2003 07:33:33 -0400 (EDT) Received: from althusius.net (ws1 [192.168.0.10])h8QBZWja001790 for ; Fri, 26 Sep 2003 07:35:45 -0400 (EDT) Message-ID: <3F7424D4.1080703@althusius.net> Date: Fri, 26 Sep 2003 07:36:52 -0400 From: Tim Hawes User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5b) Gecko/20030903 Thunderbird/0.2 X-Accept-Language: en-us, en MIME-Version: 1.0 To: freebsd-config@freebsd.org References: <200309240845.42257.thawes@althusius.net> In-Reply-To: <200309240845.42257.thawes@althusius.net> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-Content-Filtered-By: Mailman/MimeDel 2.1.1 Subject: Install Trouble X-BeenThere: freebsd-config@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Installation and Configuration List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 26 Sep 2003 11:37:28 -0000 Is there some other forum I should try for this problem? It seems awfully quiet here. Tim Hawes wrote: >Some new information, I did not make clear last time. FreeBSD 4.8 does lock up >(or no vt is available) during the hardware probe, while 5.1 lets me switch >between vt's. > >Nothing changed after removing unneeded drivers, (including only the ones you >suggested). It did not change anything. I was not able to try the same thing >with FreeBSD 5.1, because it still goes into hardware probe before I get a >chance to specify what drivers to load. > > > >On Wednesday 24 September 2003 5:26 am, Aaron Burke wrote: > > >>>Subject: Install Trouble >>> >>> >>>I am a newbie in the FreeBSD world, but an old hat for Solaris and >>>Linux. I have an Intel box with Windows 2000 and Linux already on it. I >>>shrunk my Windows partition to allocate about 16 GB for a new FreeBSD >>>install. I have installed FreeBSD on VMware several times in the past, >>>so this is my first non-virtual install. >>> >>>The install completely halts shortly after it shows the "Probing >>>hardware (this may take a while...)" message. I look at vt1 to see what >>>debugging messages are there. I notice that it stops right after finding >>>the /dev/cua devices (serial devices???). >>> >>> >>Yes, cuaa0 is linked to the serial port code. >> >>Allthough I am not 100% sure about this, FreeBSD detects the device, then >>tells you about it. So that was probably telling you that the last >>device that it properly loaded was the serial ports. >> >>Have you booted with "boot -c -v", then typed visual? You should see a >>message that says "Hit [Enter] to boot immediatly, or any other key for >>a command prompt.". Then type "boot -c -v" (config, and verbose). Then >>a prompt labeled "config> " will appear. Type visual and try disabling >>any hardware that you dont have. Allthough the GENERIC kernel will usually >>fail to detect these devices (because they dont exist), its still worth >>disabling them. >> >> >> >>>The console is not locked, I can switch back and forth from vt0 and vt1 >>>without trouble. It is just stopped. >>> >>> >>Thats actually a good thing. Its kind of nice when a the system is still >>at least partially running! >> >> >> >>>It did this to me with both FreeBSD versions 4.8 and 5.1 >>> >>> >>That helps rule out some of the big differences between the two different >>branches of the FreeBSD source. >> >> >> >>>This is a Walmart Os-less PC I bought just over a year ago. I am no >>>hardware guru, and I am not sure what info is pertinent, so tell me what >>>I need to tell you to help me. >>> >>> >>Well, that pretty much rules out SCSI, you may try disabling the scsi >>devices. The only things that you should need are as follows: >>Storage : >> ATA/ATAPI compatable disk controller ata0 14 0x1f0 >> ATA/ATAPI compatable disk controller ata0 15 0x170 >>Network : >> Only enable your network card. >>Communications : >> You are likely to have at least one serial port, but disable it >> for now. You can enable it later if you need it. The same goes >> for your parallel port. >>Input : >> Keyboard atkbd0 1 >> Syscons console driver sc0 >>Miscellaneous : >> Math coprocessor npx0 >> >>Most people recompile the kernel when they have the box up and running. >>Feel free to talk to freebsd-questions about this topic. We will be happy >>to forward you some links to some sites that give an overview of the >>process. >> >> >> >>>Best regards, >>> >>>Tim Hawes >>> >>> >>Be sure to let us know if you have any luck. There are several people >>on this list that will have more advice to offer. But I would start >>by making sure your not going to attempt to load drivers for hardware >>that you dont have. >> >>Aaron Burke >>aburke@nullplusone.com >> >> > >_______________________________________________ >freebsd-config@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-config >To unsubscribe, send any mail to "freebsd-config-unsubscribe@freebsd.org" > >