Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Mar 1995 09:52:32 -0600 (CST)
From: (Boyd Faulkner)
To: (Xiaoping Jia)
Subject:   Re: FreeBSD installation problem
Message-ID:  <9503161552.AA06777@olympus>
In-Reply-To: <> from "Xiaoping Jia" at Mar 15, 95 06:40:32 pm

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
> Installed the boot manager. When boots I first choose F5 to disk 2 then 
> choose F2 to boot FreeBSD. I got the initial boot message, similar to 
> those when boot from boot floppy. When prompt with 
> boot: 
> I type 
> hd(1,a)/kernel
> Then it shows
> |
> and stuck. 
> I read carefully the troubleshooting part. No help. I really appreciate 
> your help. Regards. 
Unless, Disk1 is IDE and Disk2 is SCSI, use 
wd(1,a)/kernel if they are IDE or
sd(1,a)/kernel if they are SCSI.

Congrats on the boot manager.  I only got that to work but not labelling the 
second disk at all but then your don't get the boot: prompt.

Good Luck.


 Boyd Faulkner                         

Want to link to this message? Use this URL: <>