Date: Thu, 14 Jun 2007 14:20:12 +0100 From: Tom Evans <tevans.uk@googlemail.com> To: "eculp@argosteve.com" <eculp@argosteve.com> Cc: freebsd-stable@freebsd.org Subject: Re: atapicam and cd-rw problem, no cd0 but acd0 some error Message-ID: <1181827212.1212.27.camel@localhost> In-Reply-To: <20070614073519.fhyyh35ztw8swssk@correo.argosteve.com> References: <200706132034.22794.idiotbg@gmail.com> <1181817741.1212.3.camel@localhost> <20070614073519.fhyyh35ztw8swssk@correo.argosteve.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-canLSypoi+STR9YbfGQO Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Thu, 2007-06-14 at 07:35 -0500, eculp@argosteve.com wrote: > Quoting Tom Evans <tevans.uk@googlemail.com>: >=20 > > On Wed, 2007-06-13 at 20:34 +0200, Momchil Ivanov wrote: > >> Hi guys, > >> > >> I am running 6-STABLE as of today and I cannot use the CD-RW on my > >> IBM T40 to > >> burn CDs. When I put atapicam_load=3D"YES" in loader.conf or compile i= t in the > >> kernel I see the following error > >> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0= x40 > >> 0x00 0x01 > >> and no /dev/cd0 is created. I don`t see the above error without atapic= am > >> loaded or in kernel. This is not something new, I haven`t been able to > >> get /dev/cd0 since more than a month following 6-STABLE, don`t know if= it > >> ever worked on 6 or 6.x, but I certainly cannot get it to work on 6-ST= ABLE. > >> Any help would be appreciated :) I would be happy ot be able to burn C= Ds. > >> > >> I have acd0: CDRW <TOSHIBA DVD-ROM SD-R9012/1121> at ata1-master UDMA3= 3 > >> and camcontrol shows: > >> <TOSHIBA DVD-ROM SD-R9012 1121> at scbus2 target 0 lun 0 (pass1) > >> > >> Thanks > >> > > > > The error message is benign - the controller tries to send a command to > > the device, the device doesn't support it, so you get the error message= . > > That's all, everything else should work. > > > > Do you load or compile into your kernel > > device scbus > > device cd > > device atapicam > > > > atapicam allows you to access ATAPI devices through the SCSI subsystem, > > so you must ensure that you have a SCSI subsystem to access them > > through. > > > > Cheers > > > > Tom >=20 > Hi Tom, >=20 > I am getting a very similar error with my sony cdrom: >=20 > Jun 14 07:12:36 HOME kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST =20 > asc=3D0x24 ascq=3D0x00 > Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): error 22 > Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: pass0 at ata1 bus 0 target 1 lun 0 > Jun 14 07:12:36 HOME kernel: pass0: <SONY CD-RW CRX230ED 4YS1> =20 > Removable CD-ROM SCSI-0 device > Jun 14 07:12:36 HOME kernel: pass0: 33.000MB/s transfers > Jun 14 07:12:36 HOME kernel: GEOM: new disk cd0 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: cd0 at ata1 bus 0 target 1 lun 0 > Jun 14 07:12:36 HOME kernel: cd0: <SONY CD-RW CRX230ED 4YS1> =20 > Removable CD-ROM SCSI-0 device > Jun 14 07:12:36 HOME kernel: cd0: 33.000MB/s transfers > Jun 14 07:12:36 HOME kernel: cd0: Attempt to query device size failed: =20 > NOT READY, Medium not present > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error >=20 > There was a good cd in the burner when booting. >=20 > the unfortunate part is that in this case, it doesn't seem to be =20 > benign because I can't mount any cd nor can I use burncd or k3b. >=20 > Any suggestions appreciated. IIRC, I can use burncd if I remove scsi sup= port. >=20 > Thanks, >=20 > ed >=20 Hey ed Those errors look different to what was described (I only get one such error in my dmesg), and different to what the OP reported (he didnt get a cd0). I don't run STABLE, just CURRENT, so I don't know what to suggest. There was a lot of talk about problems burning in k3b on freebsd-stable@ a few months ago, I suggest searching the archives for k3b and see what the resolution was to that. If you haven't already (and don't have a good reason to not), I'd ensure your kernel + userland are up to date, perhaps track RELENG_6 rather than RELENG_6_[12] and see if that helps. Tom --=-canLSypoi+STR9YbfGQO Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (FreeBSD) iD8DBQBGcUCMlcRvFfyds/cRAllDAKCVgOFz/895QIHRYRuDx71OTDfEJACglXCh rFhqyeFYjPvt3LxF/RgKcz8= =Xdld -----END PGP SIGNATURE----- --=-canLSypoi+STR9YbfGQO--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1181827212.1212.27.camel>