Date: Thu, 25 Jul 2013 15:27:46 -0700 From: Adrian Chadd <adrian@freebsd.org> To: "Sean C. Farley" <scf@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: Re: iwn firmware sysassert Message-ID: <CAJ-Vmom_LbpWfK26meZtwn88uMxxmpqD-%2BfanzS1_p_0OohBqg@mail.gmail.com> In-Reply-To: <alpine.BSF.2.02.1307251813590.3080@thor.farley.org> References: <alpine.BSF.2.02.1307251813590.3080@thor.farley.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Try jsut doing: ifconfig wlan0 create wlandev iwn0 wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf .. ie, don't do an ifconfig iwn0 up -adrian On 25 July 2013 15:25, Sean C. Farley <scf@freebsd.org> wrote: > After upgrading my laptop from 8.4-STABLE to 9-STABLE, I have been unable to > use the wireless NIC. The indicator light will flash for a moment and > surrender. The error is always the same and reproducible with "ifconfig > iwn0 up". The system is 9-STABLE (r253048). This appears to be the same or > similar to PR 175053: http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/175053 > > Boot: > iwn0: <Intel Ultimate N WiFi Link 5300> mem 0xf8000000-0xf8001fff irq 17 at > device 0.0 on pci4 > > Card details: > iwn0@pci0:4:0:0: class=0x028000 card=0x11218086 chip=0x42358086 > rev=0x00 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Ultimate N WiFi Link 5300' > class = network > bar [10] = type Memory, range 64, base 0xf8000000, size 8192, enabled > cap 01[c8] = powerspec 3 supports D0 D3 current D0 > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message > cap 10[e0] = PCI-Express 1 endpoint max data 128(128) FLR link x1(x1) > speed 2.5(2.5) ASPM L1(L0s/L1) > ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected > ecap 0003[140] = Serial 1 00216affff985c6e > > Error (same each time except for time): > wlan0: link state changed to UP > iwn0: iwn_intr: fatal firmware error > firmware error log: > error type = "SYSASSERT" (0x00000005) > program counter = 0x00003130 > source line = 0x00000585 > error data = 0x0000000100000000 > branch link = 0x0000312A0000312A > interrupt link = 0x0000091600000000 > time = 1611815765 > driver status: > tx ring 0: qid=0 cur=0 queued=0 > tx ring 1: qid=1 cur=0 queued=0 > tx ring 2: qid=2 cur=0 queued=0 > tx ring 3: qid=3 cur=2 queued=0 > tx ring 4: qid=4 cur=67 queued=0 > tx ring 5: qid=5 cur=0 queued=0 > tx ring 6: qid=6 cur=0 queued=0 > tx ring 7: qid=7 cur=0 queued=0 > tx ring 8: qid=8 cur=0 queued=0 > tx ring 9: qid=9 cur=0 queued=0 > tx ring 10: qid=10 cur=0 queued=0 > tx ring 11: qid=11 cur=0 queued=0 > tx ring 12: qid=12 cur=0 queued=0 > tx ring 13: qid=13 cur=0 queued=0 > tx ring 14: qid=14 cur=0 queued=0 > tx ring 15: qid=15 cur=0 queued=0 > tx ring 16: qid=16 cur=0 queued=0 > tx ring 17: qid=17 cur=0 queued=0 > tx ring 18: qid=18 cur=0 queued=0 > tx ring 19: qid=19 cur=0 queued=0 > rx ring: cur=0 > wlan0: link state changed to DOWN > > vmstat -i: > ... > irq258: iwn0 973 0 > ... > > Any ideas on what is broken and how to get it to work? > > Please Cc me as I am not on this specific list. > > Thank you. > > Sean > -- > scf@FreeBSD.org > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmom_LbpWfK26meZtwn88uMxxmpqD-%2BfanzS1_p_0OohBqg>