Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 23 Oct 2004 00:06:54 +0200
From:      Roman Neuhauser <neuhauser@chello.cz>
To:        freebsd-current <freebsd-current@freebsd.org>
Subject:   Re: 5.3-RC1 on Asus A7V880: black screen instead of sysinstall
Message-ID:  <20041022220654.GB5278@isis.wad.cz>
In-Reply-To: <20041022092820.GA1203@isis.wad.cz>
References:  <20041022092820.GA1203@isis.wad.cz>

next in thread | previous in thread | raw e-mail | index | archive | help

--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

    This time, with the attachment.

# neuhauser@chello.cz / 2004-10-22 11:28:20 +0200:
> I have a problem installing 5.3-RC1 on a box with Asus A7V880
> motherboard.
> 
> The screen goes black after probing USB, and I can only see sysinstall
> (the reboot/continue/shell dialog) for a second after pressing
> ctrl-alt-del. I tried with and without acpi (beastie menu and bios
> settings), no difference.

    The monitor always goes dark after usb is probed. Attached is a
    record of a verbose boot. Are those
    acpi_buttonN lines (433, 434) suspicious? It appears I'll be able to
    install the machine, and then I'll be available for tests.

-- 
If you cc me or remove the list(s) completely I'll most likely ignore
your message.    see http://www.eyrie.org./~eagle/faqs/questions.html

--/9DWx/yDrRhgMJTb
Content-Type: text/plain; charset=iso-8859-2
Content-Disposition: attachment; filename=zows
Content-Transfer-Encoding: quoted-printable

Script started on Fri Oct 22 17:37:57 2004
root:/home/milos/projects/s21sec_stmeval:1# tip crash
=07connected
FreeBSD/i386 boot
Default: 0:fd(0,a)/boot/loader
boot:=20
Uncompressing ... doneConsole: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 639kB/1046784kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(root@wally.zoom-int.cz, Thu Oct 21 08:35:13 UTC 2004)
Loading /boot/defaults/loader.conf=20
/kernel text=3D0x425d54=20
Insert disk labelled "Kernel floppy 1" and press any key...

Insert disk labelled "Kernel floppy 2" and press any key...
data=3D0x7cfc0+0x4ace0 syms=3D[0x4+0x59dd0+0x4+0x6ed80]
Insert boot floppy and press Enter
/acpi.ko text=3D0x3f978 data=3D0x1be4+0x110c syms=3D[0x4+0x72a0+0x4+0x9743]
=1B[H=1B[J=1B[4;46H             ,        ,=1B[5;46H            /(        )`=
=1B[6;46H            \ \___   / |=1B[7;46H            /- _  `-/  '=1B[8;46H=
           (/\/ \ \   /\=1B[9;46H           / /   | `    \=1B[10;46H       =
    O O   ) /    |=1B[11;46H           `-^--'`<     '=1B[12;46H          (_=
=2E)  _  )   /=1B[13;46H         =20
  `.___/`    /=1B[14;46H             `-----' /=1B[15;46H<----.     __ / __ =
  \=1B[16;46H<----|=3D=3D=3D=3DO)))=3D=3D) \) /=3D=3D=3D=3D=1B[17;46H<----'=
    `--' `.__,' \=1B[18;46H             |        |=1B[19;46H              \=
       /       /\=1B[20;46H         ______( (_  / \______/=1B[21;46H       =
,'  ,-----'   |=1B[22;46H       `--{__________)=1B[3;2H=B3=1B[4;2H=B3=1B[5;=
2H=B3=1B[6;2H=B3=1B[7;2H=B3=1B[8;2H=B3=1B[9;2H=B3=1B[10;2H=B3=1B[11;2H=B3=
=1B[12;2H=B3=1B[13;2H=B3=1B[14;2H=B3=1B[15;2H=B3=1B[16;2H=B3=1B[17;2H=B3=1B=
[18;2H=B3=1B[19;2H=B3=1B[20;2H=B3=1B[21;2H=B3=1B[3;44H=B3=1B[4;44H=B3=1B[5;=
44H=B3=1B[6;44H=B3=1B[7;44H=B3=1B[8;44H=B3=1B[9;44H=B3=1B[10;44H=B3=1B[11;4=
4H=B3=1B[12;44H=B3=1B[13;44H=B3=1B[14;44H=B3=1B[15;44H=B3=1B[16;44H=B3=1B[1=
7;44H=B3=1B[18;44H=B3=1B[19;44H=B3=1B[20;44H=B3=1B[21;44H=B3=1B[2;3H=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=1B[22;3H=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=C4=
=C4=C4=C4=C4=C4=C4=C4=C4=1B[2;2H=DA=1B[22;2H=C0=1B[2;44H=BF=1B[22;44H=D9=1B=
[6;13HWelcome to FreeBSD!=1B[9;5H1 =1B[9;6H. Boot FreeBSD [default]=1B[10;5=
H2 =1B[10;6H. Boot FreeBSD with ACPI disabled=1B[11;5H3 =1B[11;6H. Boot Fre=
eBSD in Safe Mode=1B[12;5H4 =1B[12;6H. Boot FreeBSD in single user mode=1B[=
13;5H5 =1B[13;6H. Boot FreeBSD with ver
 bose logging=1B[14;5H6 =1B[14;6H. Escape to loader prompt=1B[15;5H7 =1B[15=
;6H. Reboot=1B[20;5HSelect option, [Enter] for default=1B[21;5Hor [Space] t=
o pause timer    =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21=
;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B=
[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =1B[21;32H10 =
=1B[21;32H10 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =
=1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B=
[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21;32H9 =1B[21=
;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32=
H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =
=1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H8 =1B[21;32H7 =1B[21;32H7 =1B=
[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21=
;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32=
H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H7 =1B[21;32H6 =1B[21;32H6 =1B[21;32H6 =
=1B[21;32H6 =1B[21;32H6 =1B[21;32H6 =1B[25;0HSMAP type=3D01 base=3D000
 0000000000000 len=3D000000000009fc00
SMAP type=3D02 base=3D000000000009fc00 len=3D0000000000000400
SMAP type=3D02 base=3D00000000000e4000 len=3D000000000001c000
SMAP type=3D01 base=3D0000000000100000 len=3D000000003fe40000
SMAP type=3D03 base=3D000000003ff40000 len=3D0000000000010000
SMAP type=3D04 base=3D000000003ff50000 len=3D00000000000b0000
SMAP type=3D02 base=3D00000000ff7c0000 len=3D0000000000840000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-ZCROS #0: Thu Oct 21 08:49:30 UTC 2004
    root@wally.zoom-int.cz:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/kernel" at 0xc0e45000.
Preloaded elf module "/acpi.ko" at 0xc0e451e8.
Preloaded mfs_root "/mfsroot" at 0xc0e45288.
Table 'FACP' at 0x3ff40200
Table 'APIC' at 0x3ff40300
MADT: Found table at 0x3ff40300
MP Configuration Table version 1.4 found at 0xc00f0fd0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
ACPI APIC Table: <A M I  OEMAPIC >
Calibrating clock(s) ... i8254 clock: 1193220 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1916461553 Hz
CPU: AMD Athlon(tm) XP  2600+ (1916.46-MHz 686-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0x6a0  Stepping =3D 0
  Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=3D0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat=
ive
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  =3D 1072955392 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001029000 - 0x000000003ed12fff, 1036951552 bytes (253162 pages)
avail memory =3D 1036333056 (988 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry =3D 0xf0010 (c00f0010)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f4900
pnpbios: Entry =3D f0000:54ea  Rev =3D 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000760
pci_open(1a):	mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=3D060000] [hdr=3D80] is there (id=3D02691106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00f47b0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x01  3 4 5 7 10 11 14 15
embedded    0    1    B   0x02  3 4 5 7 10 11 14 15
embedded    0   17    C   0x03  3 4 5 7 10 11 14 15
embedded    0   16    A   0x01  3 4 5 7 10 11 14 15
embedded    0   16    B   0x02  3 4 5 7 10 11 14 15
embedded    0   16    C   0x03  3 4 5 7 10 11 14 15
embedded    0   16    D   0x05  3 4 5 7 10 11 14 15
embedded    0   18    A   0x01  3 4 5 7 10 11 14 15
embedded    0   18    B   0x02  3 4 5 7 10 11 14 15
embedded    0   18    C   0x03  3 4 5 7 10 11 14 15
embedded    0   18    D   0x05  3 4 5 7 10 11 14 15
embedded    0   15    A   0x02  3 4 5 7 10 11 14 15
embedded    0   15    B   0x03  3 4 5 7 10 11 14 15
embedded    0   15    C   0x05  3 4 5 7 10 11 14 15
embedded    0   15    D   0x01  3 4 5 7 10 11 14 15
slot 1      0   12    A   0x05  3 4 5 7 10 11 14 15
slot 1      0   12    B   0x02  3 4 5 7 10 11 14 15
slot 1      0   12    C   0x01  3 4 5 7 10 11 14 15
slot 1      0   12    D   0x03  3 4 5 7 10 11 14 15
slot 2      0   13    A   0x01  3 4 5 7 10 11 14 15
slot 2      0   13    B   0x03  3 4 5 7 10 11 14 15
slot 2      0   13    C   0x02  3 4 5 7 10 11 14 15
slot 2      0   13    D   0x05  3 4 5 7 10 11 14 15
slot 3      0   14    A   0x02  3 4 5 7 10 11 14 15
slot 3      0   14    B   0x05  3 4 5 7 10 11 14 15
slot 3      0   14    C   0x03  3 4 5 7 10 11 14 15
slot 3      0   14    D   0x01  3 4 5 7 10 11 14 15
slot 4      0   19    A   0x03  3 4 5 7 10 11 14 15
slot 4      0   19    B   0x01  3 4 5 7 10 11 14 15
slot 4      0   19    C   0x05  3 4 5 7 10 11 14 15
slot 4      0   19    D   0x02  3 4 5 7 10 11 14 15
slot 5      0   11    A   0x01  3 4 5 7 10 11 14 15
slot 5      0   11    B   0x03  3 4 5 7 10 11 14 15
slot 5      0   11    C   0x02  3 4 5 7 10 11 14 15
slot 5      0   11    D   0x05  3 4 5 7 10 11 14 15
embedded    0    9    A   0x03  3 4 5 7 10 11 14 15
embedded    0   10    A   0x01  3 4 5 7 10 11 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
ACPI timer looks GOOD min =3D 1, max =3D 2, width =3D 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
	map[10]: type 3, range 32, base e0000000, size 28, enabled
found->	vendor=3D0x1106, dev=3D0x0269, revid=3D0x80
	bus=3D0, slot=3D0, func=3D0
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0106, statreg=3D0x2230, cachelnsz=3D0 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=3D0x1106, dev=3D0x1269, revid=3D0x00
	bus=3D0, slot=3D0, func=3D1
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1106, dev=3D0x2269, revid=3D0x00
	bus=3D0, slot=3D0, func=3D2
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1106, dev=3D0x3269, revid=3D0x00
	bus=3D0, slot=3D0, func=3D3
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1106, dev=3D0x4269, revid=3D0x00
	bus=3D0, slot=3D0, func=3D4
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1106, dev=3D0x7269, revid=3D0x00
	bus=3D0, slot=3D0, func=3D7
	class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->	vendor=3D0x1106, dev=3D0xb198, revid=3D0x00
	bus=3D0, slot=3D1, func=3D0
	class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
	cmdreg=3D0x0106, statreg=3D0x0230, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns)
	map[10]: type 1, range 32, base fe700000, size 14, enabled
	map[14]: type 4, range 32, base 0000e400, size  8, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 18
found->	vendor=3D0x11ab, dev=3D0x4320, revid=3D0x13
	bus=3D0, slot=3D9, func=3D0
	class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0117, statreg=3D0x02b0, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x17 (5750 ns), maxlat=3D0x1f (7750 ns)
	intpin=3Da, irq=3D18
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base fd000000, size 24, enabled
	map[14]: type 4, range 32, base 0000efa0, size  4, enabled
found->	vendor=3D0x1142, dev=3D0x6422, revid=3D0x02
	bus=3D0, slot=3D12, func=3D0
	class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0003, statreg=3D0x0400, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	map[10]: type 4, range 32, base 0000eff0, size  3, enabled
	map[14]: type 4, range 32, base 0000efe4, size  2, enabled
	map[18]: type 4, range 32, base 0000ef98, size  3, enabled
	map[1c]: type 4, range 32, base 0000efe0, size  2, enabled
	map[20]: type 4, range 32, base 0000ef80, size  4, enabled
	map[24]: type 4, range 32, base 0000e800, size  8, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 20
found->	vendor=3D0x1106, dev=3D0x3149, revid=3D0x80
	bus=3D0, slot=3D15, func=3D0
	class=3D01-04-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D20
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000fc00, size  4, enabled
found->	vendor=3D0x1106, dev=3D0x0571, revid=3D0x06
	bus=3D0, slot=3D15, func=3D1
	class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
	cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
	lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D255
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000eec0, size  5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found->	vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
	bus=3D0, slot=3D16, func=3D0
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000ef00, size  5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 21
found->	vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
	bus=3D0, slot=3D16, func=3D1
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Da, irq=3D21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000ef20, size  5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found->	vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
	bus=3D0, slot=3D16, func=3D2
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000ef40, size  5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found->	vendor=3D0x1106, dev=3D0x3038, revid=3D0x81
	bus=3D0, slot=3D16, func=3D3
	class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0017, statreg=3D0x2210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Db, irq=3D21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base fe900000, size  8, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 21
found->	vendor=3D0x1106, dev=3D0x3104, revid=3D0x86
	bus=3D0, slot=3D16, func=3D4
	class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0017, statreg=3D0x0210, cachelnsz=3D8 (dwords)
	lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	intpin=3Dc, irq=3D21
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=3D0x1106, dev=3D0x3227, revid=3D0x00
	bus=3D0, slot=3D17, func=3D0
	class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
	cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D0 (dwords)
	lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xefffffff at device =
0.0 on pci0
agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 252M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.P0P1 - AE_N=
OT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
skc0: <Marvell Gigabit Ethernet> port 0xe400-0xe4ff mem 0xfe700000-0xfe703f=
ff irq 18 at device 9.0 on pci0
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe700000
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:11:2f:23:65:d1
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,=
 auto
skc0: [MPSAFE]
pci0: <display, VGA> at device 12.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xe800-0xe8ff,0xef80-0xef8f,0xe=
fe0-0xefe3,0xef98-0xef9f,0xefe4-0xefe7,0xeff0-0xeff7 irq 20 at device 15.0 =
on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xef80
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xeff0
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xefe4
ata2: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata2: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata2: [MPSAFE]
ata3: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xef98
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xefe0
ata3: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-master: stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3-slave:  stat=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff
ata3: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177=
,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50
ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0-slave:  stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D50 stat1=3D50 devices=3D0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D50
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-master: stat=3D0x7f err=3D0x7f lsb=3D0x7f msb=3D0x7f
ata1-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata1: reset tp2 stat0=3Dff stat1=3D00 devices=3D0x8<ATAPI_SLAVE>
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xeec0-0xeedf irq 21 at device 16.0=
 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xeec0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xef00-0xef1f irq 21 at device 16.1=
 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef00
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xef20-0xef3f irq 21 at device 16.2=
 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef20
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xef40-0xef5f irq 21 at device 16.3=
 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xef40
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 03 06
psm: status 00 33 55
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on=
 acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0xc001 0xc001 0xc001 0xc001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0xc001 0xc001 0xc001 0xc001
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 a0 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 a0 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1916461553 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc0a0b6dc
ata0-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure md0a, start 0 length 4423680 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
ata0-master: pio=3D0x0c wdma=3D0x22 udma=3D0x46 cable=3D80pin
ata0-master: setting PIO4 on VIA 8237 chip
ata0-master: setting UDMA133 on VIA 8237 chip
ata0-slave: setting PIO4 on VIA 8237 chip
ata0-slave: setting UDMA133 on VIA 8237 chip
ad0: <Maxtor 6Y080P0/YAR41BW0> ATA-7 disk at ata0-master
ad0: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA133
ar: FreeBSD check1 failed
ad1: <Maxtor 6Y080P0/YAR41BW0> ATA-7 disk at ata0-slave
ad1: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA133
ar: FreeBSD check1 failed
ata1-slave: pio=3D0x0c wdma=3D0x22 udma=3D0x42 cable=3D40pin
ata1-slave: setting PIO4 on VIA 8237 chip
ata1-slave: setting UDMA33 on VIA 8237 chip
acd0: <CD-540E/1.0A> CDROM drive at ata1 as slave
acd0: read 6890KB/s (6890KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm photo disc
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure fd0a, start 0 length 1474560 end 1474559
GEOM: Configure fd0c, start 0 length 1474560 end 1474559
GEOM: new disk ad0
GEOM: new disk ad1
Mounting root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console

These are the predefined terminal types available to
sysinstall when running stand-alone.  Please choose the
closest match for your particular terminal.

1 ...................... Standard ANSI terminal.
2 ...................... VT100 or compatible terminal.
3 ...................... FreeBSD system console (color).
4 ...................... FreeBSD system console (monochrome).

5 ...................... xterm terminal emulator.

Your choice: (1-5) ^[[1;2=08=08=08=08=08=08



--/9DWx/yDrRhgMJTb--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041022220654.GB5278>