Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 7 Oct 2019 09:46:33 +0000 (UTC)
From:      Hans Petter Selasky <hselasky@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-11@freebsd.org
Subject:   svn commit: r353240 - in stable/11: share/man/man4 sys/dev/mlx5 sys/dev/mlx5/mlx5_core sys/dev/mlx5/mlx5_en
Message-ID:  <201910070946.x979kXES099535@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: hselasky
Date: Mon Oct  7 09:46:33 2019
New Revision: 353240
URL: https://svnweb.freebsd.org/changeset/base/353240

Log:
  MFC r352983 and r353001:
  Move EEPROM information query from a sysctl in mlx5en(4) to an ioctl
  in mlx5core. The EEPROM information is not only a property of the
  mlx5en(4) driver.
  
  Submitted by:	slavash@
  Sponsored by:	Mellanox Technologies

Modified:
  stable/11/share/man/man4/mlx5io.4
  stable/11/sys/dev/mlx5/diagnostics.h
  stable/11/sys/dev/mlx5/mlx5_core/mlx5_diagnostics.c
  stable/11/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c
  stable/11/sys/dev/mlx5/mlx5_en/en.h
  stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_ethtool.c
  stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_main.c
  stable/11/sys/dev/mlx5/mlx5io.h
  stable/11/sys/dev/mlx5/port.h
Directory Properties:
  stable/11/   (props changed)

Modified: stable/11/share/man/man4/mlx5io.4
==============================================================================
--- stable/11/share/man/man4/mlx5io.4	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/share/man/man4/mlx5io.4	Mon Oct  7 09:46:33 2019	(r353240)
@@ -25,18 +25,18 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd May 7, 2019
+.Dd October 2, 2019
 .Dt mlx5io 4
 .Os
 .Sh NAME
 .Nm mlx5io
-.Nd IOCTL interface to manage Connect-X 4/5 Mellanox network adapters
+.Nd IOCTL interface to manage Connect-X 4/5/6 Mellanox network adapters
 .Sh SYNOPSIS
 .In dev/mlx5/mlx5io.h
 .Sh DESCRIPTION
 The
 .Nm
-interface is provided for management of the Connect-X 4 and 5 network adapters
+interface is provided for management of the Connect-X4, 5 and 6 network adapters
 in the aspects not covered by the generic network configuration,
 mostly related to the PCIe attachment and internal card working.
 Interface consists of the commands, which are passed by means of
@@ -147,6 +147,29 @@ Requests PCIe link-level reset on the device.
 The address of the device is specified by the
 .Vt struct mlx5_tool_addr
 structure, which should be passed as an argument.
+.It Dv MLX5_EEPROM_GET
+Fetch EEPROM information.
+The argument to the command should point to the input/output
+.Vt struct mlx5_eeprom_get
+structure where, the
+.Dv devaddr
+field specifies the address of the device.
+.Bd -literal
+struct mlx5_eeprom_get {
+        struct mlx5_tool_addr devaddr;
+        size_t eeprom_info_page_valid;
+        uint32_t *eeprom_info_buf;
+        size_t eeprom_info_out_len;
+};
+.Ed
+.Pp
+On successfull return, the
+.Dv eeprom_info_out_len
+field reports the length of the EEPROM information.
+.Dv eeprom_info_buf
+field contains the actual EEPROM information.
+.Dv eeprom_info_page_valid
+field reports the third page validity.
 .El
 .Sh FILES
 The

Modified: stable/11/sys/dev/mlx5/diagnostics.h
==============================================================================
--- stable/11/sys/dev/mlx5/diagnostics.h	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/diagnostics.h	Mon Oct  7 09:46:33 2019	(r353240)
@@ -32,6 +32,8 @@
 #define	MLX5_CORE_DIAGNOSTICS_STRUCT(n, s, t) s,
 #define	MLX5_CORE_DIAGNOSTICS_ENTRY(n, s, t) { #s, (t) },
 
+static MALLOC_DEFINE(M_MLX5_EEPROM, "MLX5EEPROM", "MLX5 EEPROM information");
+
 struct mlx5_core_diagnostics_entry {
 	const char *desc;
 	u16	counter_id;
@@ -127,6 +129,18 @@ union mlx5_core_general_diagnostics {
 extern const struct mlx5_core_diagnostics_entry
 	mlx5_core_general_diagnostics_table[MLX5_CORE_GENERAL_DIAGNOSTICS_NUM];
 
+struct mlx5_eeprom {
+	int	lock_bit;
+	int	i2c_addr;
+	int	page_num;
+	int	device_addr;
+	int	module_num;
+	int	len;
+	int	type;
+	int	page_valid;
+	u32	*data;
+};
+
 /* function prototypes */
 int mlx5_core_set_diagnostics_full(struct mlx5_core_dev *mdev,
 				   u8 enable_pci, u8 enable_general);
@@ -134,5 +148,8 @@ int mlx5_core_get_diagnostics_full(struct mlx5_core_de
 				   union mlx5_core_pci_diagnostics *ppci,
 				   union mlx5_core_general_diagnostics *pgen);
 int mlx5_core_supports_diagnostics(struct mlx5_core_dev *mdev, u16 counter_id);
+int mlx5_read_eeprom(struct mlx5_core_dev *dev, struct mlx5_eeprom *eeprom);
+int mlx5_get_eeprom_info(struct mlx5_core_dev *dev, struct mlx5_eeprom *eeprom);
+int mlx5_get_eeprom(struct mlx5_core_dev *dev, struct mlx5_eeprom *ee);
 
 #endif					/* MLX5_CORE_DIAGNOSTICS_H */

Modified: stable/11/sys/dev/mlx5/mlx5_core/mlx5_diagnostics.c
==============================================================================
--- stable/11/sys/dev/mlx5/mlx5_core/mlx5_diagnostics.c	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/mlx5_core/mlx5_diagnostics.c	Mon Oct  7 09:46:33 2019	(r353240)
@@ -26,7 +26,10 @@
  */
 
 #include <dev/mlx5/driver.h>
+#include <dev/mlx5/port.h>
 #include <dev/mlx5/diagnostics.h>
+#include <dev/mlx5/mlx5_core/mlx5_core.h>
+#include <net/sff8472.h>
 
 const struct mlx5_core_diagnostics_entry
 	mlx5_core_pci_diagnostics_table[
@@ -284,3 +287,156 @@ int mlx5_core_supports_diagnostics(struct mlx5_core_de
 	}
 	return 0;			/* not supported counter */
 }
+
+/*
+ * Read the first three bytes of the eeprom in order to get the needed info
+ * for the whole reading.
+ * Byte 0 - Identifier byte
+ * Byte 1 - Revision byte
+ * Byte 2 - Status byte
+ */
+int
+mlx5_get_eeprom_info(struct mlx5_core_dev *dev, struct mlx5_eeprom *eeprom)
+{
+	u32 data = 0;
+	int size_read = 0;
+	int ret;
+
+	ret = mlx5_query_module_num(dev, &eeprom->module_num);
+	if (ret) {
+		mlx5_core_err(dev, "Failed query module error=%d\n", ret);
+		return (-ret);
+	}
+
+	/* Read the first three bytes to get Identifier, Revision and Status */
+	ret = mlx5_query_eeprom(dev, eeprom->i2c_addr, eeprom->page_num,
+	    eeprom->device_addr, MLX5_EEPROM_INFO_BYTES, eeprom->module_num, &data,
+	    &size_read);
+	if (ret) {
+		mlx5_core_err(dev,
+		    "Failed query EEPROM module error=0x%x\n", ret);
+		return (-ret);
+	}
+
+	switch (data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) {
+	case SFF_8024_ID_QSFP:
+		eeprom->type = MLX5_ETH_MODULE_SFF_8436;
+		eeprom->len = MLX5_ETH_MODULE_SFF_8436_LEN;
+		break;
+	case SFF_8024_ID_QSFPPLUS:
+	case SFF_8024_ID_QSFP28:
+		if ((data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) == SFF_8024_ID_QSFP28 ||
+		    ((data & MLX5_EEPROM_REVISION_ID_BYTE_MASK) >> 8) >= 0x3) {
+			eeprom->type = MLX5_ETH_MODULE_SFF_8636;
+			eeprom->len = MLX5_ETH_MODULE_SFF_8636_LEN;
+		} else {
+			eeprom->type = MLX5_ETH_MODULE_SFF_8436;
+			eeprom->len = MLX5_ETH_MODULE_SFF_8436_LEN;
+		}
+		if ((data & MLX5_EEPROM_PAGE_3_VALID_BIT_MASK) == 0)
+			eeprom->page_valid = 1;
+		break;
+	case SFF_8024_ID_SFP:
+		eeprom->type = MLX5_ETH_MODULE_SFF_8472;
+		eeprom->len = MLX5_ETH_MODULE_SFF_8472_LEN;
+		break;
+	default:
+		mlx5_core_err(dev, "Not recognized cable type = 0x%x(%s)\n",
+		    data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK,
+		    sff_8024_id[data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK]);
+		return (EINVAL);
+	}
+	return (0);
+}
+
+/* Read both low and high pages of the eeprom */
+int
+mlx5_get_eeprom(struct mlx5_core_dev *dev, struct mlx5_eeprom *ee)
+{
+	int size_read = 0;
+	int ret;
+
+	if (ee->len == 0)
+		return (EINVAL);
+
+	/* Read low page of the eeprom */
+	while (ee->device_addr < ee->len) {
+		ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num, ee->device_addr,
+		    ee->len - ee->device_addr, ee->module_num,
+		    ee->data + (ee->device_addr / 4), &size_read);
+		if (ret) {
+			mlx5_core_err(dev,
+			    "Failed reading EEPROM, error = 0x%02x\n", ret);
+			return (-ret);
+		}
+		ee->device_addr += size_read;
+	}
+
+	/* Read high page of the eeprom */
+	if (ee->page_valid == 1) {
+		ee->device_addr = MLX5_EEPROM_HIGH_PAGE_OFFSET;
+		ee->page_num = MLX5_EEPROM_HIGH_PAGE;
+		size_read = 0;
+		while (ee->device_addr < MLX5_EEPROM_PAGE_LENGTH) {
+			ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num,
+			    ee->device_addr, MLX5_EEPROM_PAGE_LENGTH - ee->device_addr,
+			    ee->module_num, ee->data + (ee->len / 4) +
+			    ((ee->device_addr - MLX5_EEPROM_HIGH_PAGE_OFFSET) / 4),
+			    &size_read);
+			if (ret) {
+				mlx5_core_err(dev,
+				    "Failed reading EEPROM, error = 0x%02x\n",
+				    ret);
+				return (-ret);
+			}
+			ee->device_addr += size_read;
+		}
+	}
+	return (0);
+}
+
+/*
+ * Read cable EEPROM module information by first inspecting the first
+ * three bytes to get the initial information for a whole reading.
+ * Information will be printed to dmesg.
+ */
+int
+mlx5_read_eeprom(struct mlx5_core_dev *dev, struct mlx5_eeprom *eeprom)
+{
+	int error;
+
+	eeprom->i2c_addr = MLX5_I2C_ADDR_LOW;
+	eeprom->device_addr = 0;
+	eeprom->page_num = MLX5_EEPROM_LOW_PAGE;
+	eeprom->page_valid = 0;
+
+	/* Read three first bytes to get important info */
+	error = mlx5_get_eeprom_info(dev, eeprom);
+	if (error) {
+		mlx5_core_err(dev,
+		    "Failed reading EEPROM initial information\n");
+		return (error);
+	}
+	/*
+	 * Allocate needed length buffer and additional space for
+	 * page 0x03
+	 */
+	eeprom->data = malloc(eeprom->len + MLX5_EEPROM_PAGE_LENGTH,
+	    M_MLX5_EEPROM, M_WAITOK | M_ZERO);
+
+	/* Read the whole eeprom information */
+	error = mlx5_get_eeprom(dev, eeprom);
+	if (error) {
+		mlx5_core_err(dev, "Failed reading EEPROM\n");
+		error = 0;
+		/*
+		 * Continue printing partial information in case of
+		 * an error
+		 */
+	}
+	free(eeprom->data, M_MLX5_EEPROM);
+
+	return (error);
+}
+
+

Modified: stable/11/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c
==============================================================================
--- stable/11/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/mlx5_core/mlx5_fwdump.c	Mon Oct  7 09:46:33 2019	(r353240)
@@ -32,8 +32,10 @@ __FBSDID("$FreeBSD$");
 #include <sys/fcntl.h>
 #include <dev/mlx5/driver.h>
 #include <dev/mlx5/device.h>
+#include <dev/mlx5/port.h>
 #include <dev/mlx5/mlx5_core/mlx5_core.h>
 #include <dev/mlx5/mlx5io.h>
+#include <dev/mlx5/diagnostics.h>
 
 static MALLOC_DEFINE(M_MLX5_DUMP, "MLX5DUMP", "MLX5 Firmware dump");
 
@@ -306,6 +308,54 @@ mlx5_fw_reset(struct mlx5_core_dev *mdev)
 }
 
 static int
+mlx5_eeprom_copyout(struct mlx5_core_dev *dev, struct mlx5_eeprom_get *eeprom_info)
+{
+	struct mlx5_eeprom eeprom;
+	int error;
+
+	eeprom.i2c_addr = MLX5_I2C_ADDR_LOW;
+	eeprom.device_addr = 0;
+	eeprom.page_num = MLX5_EEPROM_LOW_PAGE;
+	eeprom.page_valid = 0;
+
+	/* Read three first bytes to get important info */
+	error = mlx5_get_eeprom_info(dev, &eeprom);
+	if (error != 0) {
+		mlx5_core_err(dev,
+		    "Failed reading EEPROM initial information\n");
+		return (error);
+	}
+	eeprom_info->eeprom_info_page_valid = eeprom.page_valid;
+	eeprom_info->eeprom_info_out_len = eeprom.len;
+
+	if (eeprom_info->eeprom_info_buf == NULL)
+		return (0);
+	/*
+	 * Allocate needed length buffer and additional space for
+	 * page 0x03
+	 */
+	eeprom.data = malloc(eeprom.len + MLX5_EEPROM_PAGE_LENGTH,
+	    M_MLX5_EEPROM, M_WAITOK | M_ZERO);
+
+	/* Read the whole eeprom information */
+	error = mlx5_get_eeprom(dev, &eeprom);
+	if (error != 0) {
+		mlx5_core_err(dev, "Failed reading EEPROM error = %d\n",
+		    error);
+		error = 0;
+		/*
+		 * Continue printing partial information in case of
+		 * an error
+		 */
+	}
+	error = copyout(eeprom.data, eeprom_info->eeprom_info_buf,
+	    eeprom.len);
+	free(eeprom.data, M_MLX5_EEPROM);
+
+	return (error);
+}
+
+static int
 mlx5_ctl_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int fflag,
     struct thread *td)
 {
@@ -314,6 +364,7 @@ mlx5_ctl_ioctl(struct cdev *dev, u_long cmd, caddr_t d
 	struct mlx5_tool_addr *devaddr;
 	struct mlx5_fw_update *fu;
 	struct firmware fake_fw;
+	struct mlx5_eeprom_get *eeprom_info;
 	int error;
 
 	error = 0;
@@ -391,6 +442,18 @@ mlx5_ctl_ioctl(struct cdev *dev, u_long cmd, caddr_t d
 		if (error != 0)
 			break;
 		error = mlx5_fw_reset(mdev);
+		break;
+	case MLX5_EEPROM_GET:
+		if ((fflag & FREAD) == 0) {
+			error = EBADF;
+			break;
+		}
+		eeprom_info = (struct mlx5_eeprom_get *)data;
+		devaddr = &eeprom_info->devaddr;
+		error = mlx5_dbsf_to_core(devaddr, &mdev);
+		if (error != 0)
+			break;
+		error = mlx5_eeprom_copyout(mdev, eeprom_info);
 		break;
 	default:
 		error = ENOTTY;

Modified: stable/11/sys/dev/mlx5/mlx5_en/en.h
==============================================================================
--- stable/11/sys/dev/mlx5/mlx5_en/en.h	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/mlx5_en/en.h	Mon Oct  7 09:46:33 2019	(r353240)
@@ -712,34 +712,6 @@ struct mlx5e_params_ethtool {
 	u8	trust_state;
 };
 
-/* EEPROM Standards for plug in modules */
-#ifndef MLX5E_ETH_MODULE_SFF_8472
-#define	MLX5E_ETH_MODULE_SFF_8472	0x1
-#define	MLX5E_ETH_MODULE_SFF_8472_LEN	128
-#endif
-
-#ifndef MLX5E_ETH_MODULE_SFF_8636
-#define	MLX5E_ETH_MODULE_SFF_8636	0x2
-#define	MLX5E_ETH_MODULE_SFF_8636_LEN	256
-#endif
-
-#ifndef MLX5E_ETH_MODULE_SFF_8436
-#define	MLX5E_ETH_MODULE_SFF_8436	0x3
-#define	MLX5E_ETH_MODULE_SFF_8436_LEN	256
-#endif
-
-/* EEPROM I2C Addresses */
-#define	MLX5E_I2C_ADDR_LOW		0x50
-#define	MLX5E_I2C_ADDR_HIGH		0x51
-
-#define	MLX5E_EEPROM_LOW_PAGE		0x0
-#define	MLX5E_EEPROM_HIGH_PAGE		0x3
-
-#define	MLX5E_EEPROM_HIGH_PAGE_OFFSET	128
-#define	MLX5E_EEPROM_PAGE_LENGTH	256
-
-#define	MLX5E_EEPROM_INFO_BYTES		0x3
-
 struct mlx5e_cq {
 	/* data path - accessed per cqe */
 	struct mlx5_cqwq wq;

Modified: stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_ethtool.c
==============================================================================
--- stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_ethtool.c	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_ethtool.c	Mon Oct  7 09:46:33 2019	(r353240)
@@ -27,7 +27,6 @@
 
 #include "en.h"
 #include "port_buffer.h"
-#include <net/sff8472.h>
 
 void
 mlx5e_create_stats(struct sysctl_ctx_list *ctx,
@@ -901,214 +900,6 @@ done:
 	return (error);
 }
 
-/*
- * Read the first three bytes of the eeprom in order to get the needed info
- * for the whole reading.
- * Byte 0 - Identifier byte
- * Byte 1 - Revision byte
- * Byte 2 - Status byte
- */
-static int
-mlx5e_get_eeprom_info(struct mlx5e_priv *priv, struct mlx5e_eeprom *eeprom)
-{
-	struct mlx5_core_dev *dev = priv->mdev;
-	u32 data = 0;
-	int size_read = 0;
-	int ret;
-
-	ret = mlx5_query_module_num(dev, &eeprom->module_num);
-	if (ret) {
-		mlx5_en_err(priv->ifp, "Failed query module error=%d\n",
-		    ret);
-		return (ret);
-	}
-
-	/* Read the first three bytes to get Identifier, Revision and Status */
-	ret = mlx5_query_eeprom(dev, eeprom->i2c_addr, eeprom->page_num,
-	    eeprom->device_addr, MLX5E_EEPROM_INFO_BYTES, eeprom->module_num, &data,
-	    &size_read);
-	if (ret) {
-		mlx5_en_err(priv->ifp,
-		    "Failed query eeprom module error=0x%x\n", ret);
-		return (ret);
-	}
-
-	switch (data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) {
-	case SFF_8024_ID_QSFP:
-		eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
-		eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
-		break;
-	case SFF_8024_ID_QSFPPLUS:
-	case SFF_8024_ID_QSFP28:
-		if ((data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) == SFF_8024_ID_QSFP28 ||
-		    ((data & MLX5_EEPROM_REVISION_ID_BYTE_MASK) >> 8) >= 0x3) {
-			eeprom->type = MLX5E_ETH_MODULE_SFF_8636;
-			eeprom->len = MLX5E_ETH_MODULE_SFF_8636_LEN;
-		} else {
-			eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
-			eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
-		}
-		if ((data & MLX5_EEPROM_PAGE_3_VALID_BIT_MASK) == 0)
-			eeprom->page_valid = 1;
-		break;
-	case SFF_8024_ID_SFP:
-		eeprom->type = MLX5E_ETH_MODULE_SFF_8472;
-		eeprom->len = MLX5E_ETH_MODULE_SFF_8472_LEN;
-		break;
-	default:
-		mlx5_en_err(priv->ifp,
-		    "Not recognized cable type = 0x%x(%s)\n",
-		    data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK,
-		    sff_8024_id[data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK]);
-		return (EINVAL);
-	}
-	return (0);
-}
-
-/* Read both low and high pages of the eeprom */
-static int
-mlx5e_get_eeprom(struct mlx5e_priv *priv, struct mlx5e_eeprom *ee)
-{
-	struct mlx5_core_dev *dev = priv->mdev;
-	int size_read = 0;
-	int ret;
-
-	if (ee->len == 0)
-		return (EINVAL);
-
-	/* Read low page of the eeprom */
-	while (ee->device_addr < ee->len) {
-		ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num, ee->device_addr,
-		    ee->len - ee->device_addr, ee->module_num,
-		    ee->data + (ee->device_addr / 4), &size_read);
-		if (ret) {
-			mlx5_en_err(priv->ifp,
-			    "Failed reading eeprom, error = 0x%02x\n",ret);
-			return (ret);
-		}
-		ee->device_addr += size_read;
-	}
-
-	/* Read high page of the eeprom */
-	if (ee->page_valid) {
-		ee->device_addr = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
-		ee->page_num = MLX5E_EEPROM_HIGH_PAGE;
-		size_read = 0;
-		while (ee->device_addr < MLX5E_EEPROM_PAGE_LENGTH) {
-			ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num,
-			    ee->device_addr, MLX5E_EEPROM_PAGE_LENGTH - ee->device_addr,
-			    ee->module_num, ee->data + (ee->len / 4) +
-			    ((ee->device_addr - MLX5E_EEPROM_HIGH_PAGE_OFFSET) / 4),
-			    &size_read);
-			if (ret) {
-				mlx5_en_err(priv->ifp,
-				    "Failed reading eeprom, error = 0x%02x\n",
-				    ret);
-				return (ret);
-			}
-			ee->device_addr += size_read;
-		}
-	}
-	return (0);
-}
-
-static void
-mlx5e_print_eeprom(struct mlx5e_eeprom *eeprom)
-{
-	int row;
-	int index_in_row;
-	int byte_to_write = 0;
-	int line_length = 16;
-
-	printf("\nOffset\t\tValues\n");
-	printf("------\t\t------");
-	while (byte_to_write < eeprom->len) {
-		printf("\n0x%04X\t\t", byte_to_write);
-		for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
-			printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
-			byte_to_write++;
-		}
-	}
-
-	if (eeprom->page_valid) {
-		row = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
-		printf("\n\nUpper Page 0x03\n");
-		printf("\nOffset\t\tValues\n");
-		printf("------\t\t------");
-		while (row < MLX5E_EEPROM_PAGE_LENGTH) {
-			printf("\n0x%04X\t\t", row);
-			for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
-				printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
-				byte_to_write++;
-				row++;
-			}
-		}
-	}
-}
-
-/*
- * Read cable EEPROM module information by first inspecting the first
- * three bytes to get the initial information for a whole reading.
- * Information will be printed to dmesg.
- */
-static int
-mlx5e_read_eeprom(SYSCTL_HANDLER_ARGS)
-{
-	struct mlx5e_priv *priv = arg1;
-	struct mlx5e_eeprom eeprom;
-	int error;
-	int result = 0;
-
-	PRIV_LOCK(priv);
-	error = sysctl_handle_int(oidp, &result, 0, req);
-	if (error || !req->newptr)
-		goto done;
-
-	/* Check if device is gone */
-	if (priv->gone) {
-		error = ENXIO;
-		goto done;
-	}
-
-	if (result == 1) {
-		eeprom.i2c_addr = MLX5E_I2C_ADDR_LOW;
-		eeprom.device_addr = 0;
-		eeprom.page_num = MLX5E_EEPROM_LOW_PAGE;
-		eeprom.page_valid = 0;
-
-		/* Read three first bytes to get important info */
-		error = mlx5e_get_eeprom_info(priv, &eeprom);
-		if (error) {
-			mlx5_en_err(priv->ifp,
-			    "Failed reading eeprom's initial information\n");
-			error = 0;
-			goto done;
-		}
-		/*
-		 * Allocate needed length buffer and additional space for
-		 * page 0x03
-		 */
-		eeprom.data = malloc(eeprom.len + MLX5E_EEPROM_PAGE_LENGTH,
-		    M_MLX5EN, M_WAITOK | M_ZERO);
-
-		/* Read the whole eeprom information */
-		error = mlx5e_get_eeprom(priv, &eeprom);
-		if (error) {
-			mlx5_en_err(priv->ifp, "Failed reading eeprom\n");
-			error = 0;
-			/*
-			 * Continue printing partial information in case of
-			 * an error
-			 */
-		}
-		mlx5e_print_eeprom(&eeprom);
-		free(eeprom.data, M_MLX5EN);
-	}
-done:
-	PRIV_UNLOCK(priv);
-	return (error);
-}
-
 static const char *mlx5e_params_desc[] = {
 	MLX5E_PARAMS(MLX5E_STATS_DESC)
 };
@@ -1346,11 +1137,6 @@ mlx5e_create_ethtool(struct mlx5e_priv *priv)
 	    OID_AUTO, "device_name", CTLFLAG_RD,
 	    __DECONST(void *, pnameunit), 0,
 	    "PCI device name");
-
-	/* EEPROM support */
-	SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO, "eeprom_info",
-	    CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv, 0,
-	    mlx5e_read_eeprom, "I", "EEPROM information");
 
 	/* Diagnostics support */
 	mlx5e_create_diagnostics(priv);

Modified: stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_main.c
==============================================================================
--- stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_main.c	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/mlx5_en/mlx5_en_main.c	Mon Oct  7 09:46:33 2019	(r353240)
@@ -3277,9 +3277,9 @@ out:
 		 * The internal conversion is as follows:
 		 */
 		if (i2c.dev_addr == 0xA0)
-			read_addr = MLX5E_I2C_ADDR_LOW;
+			read_addr = MLX5_I2C_ADDR_LOW;
 		else if (i2c.dev_addr == 0xA2)
-			read_addr = MLX5E_I2C_ADDR_HIGH;
+			read_addr = MLX5_I2C_ADDR_HIGH;
 		else {
 			mlx5_en_err(ifp,
 			    "Query eeprom failed, Invalid Address: %X\n",
@@ -3288,7 +3288,7 @@ out:
 			goto err_i2c;
 		}
 		error = mlx5_query_eeprom(priv->mdev,
-		    read_addr, MLX5E_EEPROM_LOW_PAGE,
+		    read_addr, MLX5_EEPROM_LOW_PAGE,
 		    (uint32_t)i2c.offset, (uint32_t)i2c.len, module_num,
 		    (uint32_t *)i2c.data, &size_read);
 		if (error) {
@@ -3300,7 +3300,7 @@ out:
 
 		if (i2c.len > MLX5_EEPROM_MAX_BYTES) {
 			error = mlx5_query_eeprom(priv->mdev,
-			    read_addr, MLX5E_EEPROM_LOW_PAGE,
+			    read_addr, MLX5_EEPROM_LOW_PAGE,
 			    (uint32_t)(i2c.offset + size_read),
 			    (uint32_t)(i2c.len - size_read), module_num,
 			    (uint32_t *)(i2c.data + size_read), &size_read);

Modified: stable/11/sys/dev/mlx5/mlx5io.h
==============================================================================
--- stable/11/sys/dev/mlx5/mlx5io.h	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/mlx5io.h	Mon Oct  7 09:46:33 2019	(r353240)
@@ -55,11 +55,19 @@ struct mlx5_fw_update {
 	size_t img_fw_data_len;
 };
 
+struct mlx5_eeprom_get {
+	struct mlx5_tool_addr devaddr;
+	uint32_t *eeprom_info_buf;
+	uint8_t eeprom_info_page_valid;
+	size_t eeprom_info_out_len;
+};
+
 #define	MLX5_FWDUMP_GET		_IOWR('m', 1, struct mlx5_fwdump_get)
 #define	MLX5_FWDUMP_RESET	_IOW('m', 2, struct mlx5_tool_addr)
 #define	MLX5_FWDUMP_FORCE	_IOW('m', 3, struct mlx5_tool_addr)
 #define	MLX5_FW_UPDATE		_IOW('m', 4, struct mlx5_fw_update)
 #define	MLX5_FW_RESET		_IOW('m', 5, struct mlx5_tool_addr)
+#define	MLX5_EEPROM_GET		_IOWR('m', 6, struct mlx5_eeprom_get)
 
 #ifndef _KERNEL
 #define	MLX5_DEV_PATH	_PATH_DEV"mlx5ctl"

Modified: stable/11/sys/dev/mlx5/port.h
==============================================================================
--- stable/11/sys/dev/mlx5/port.h	Mon Oct  7 09:45:20 2019	(r353239)
+++ stable/11/sys/dev/mlx5/port.h	Mon Oct  7 09:46:33 2019	(r353240)
@@ -50,13 +50,34 @@ enum mlx5_an_status {
 	MLX5_AN_LINK_DOWN   = 4,
 };
 
+/* EEPROM I2C Addresses */
+#define	MLX5_I2C_ADDR_LOW			0x50
+#define	MLX5_I2C_ADDR_HIGH			0x51
+#define	MLX5_EEPROM_PAGE_LENGTH			256
 #define	MLX5_EEPROM_MAX_BYTES			32
 #define	MLX5_EEPROM_IDENTIFIER_BYTE_MASK	0x000000ff
 #define	MLX5_EEPROM_REVISION_ID_BYTE_MASK       0x0000ff00
 #define	MLX5_EEPROM_PAGE_3_VALID_BIT_MASK       0x00040000
-#define	MLX5_I2C_ADDR_LOW		0x50
-#define	MLX5_I2C_ADDR_HIGH		0x51
-#define	MLX5_EEPROM_PAGE_LENGTH		256
+#define	MLX5_EEPROM_LOW_PAGE			0x0
+#define	MLX5_EEPROM_HIGH_PAGE			0x3
+#define	MLX5_EEPROM_HIGH_PAGE_OFFSET		128
+#define	MLX5_EEPROM_INFO_BYTES			0x3
+
+/* EEPROM Standards for plug in modules */
+#ifndef MLX5_ETH_MODULE_SFF_8472
+#define	MLX5_ETH_MODULE_SFF_8472	0x1
+#define	MLX5_ETH_MODULE_SFF_8472_LEN	128
+#endif
+
+#ifndef MLX5_ETH_MODULE_SFF_8636
+#define	MLX5_ETH_MODULE_SFF_8636	0x2
+#define	MLX5_ETH_MODULE_SFF_8636_LEN	256
+#endif
+
+#ifndef MLX5_ETH_MODULE_SFF_8436
+#define	MLX5_ETH_MODULE_SFF_8436	0x3
+#define	MLX5_ETH_MODULE_SFF_8436_LEN	256
+#endif
 
 enum mlx5e_link_speed {
 	MLX5E_1000BASE_CX_SGMII	 = 0,



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201910070946.x979kXES099535>