Date: Mon, 2 Oct 2000 16:30:13 -0700 (PDT) From: Jeff Wyman <wysoft@wysoft.tzo.com> To: Jeff Duffy <jeff@alanne.com> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Signal 4 while compiling 4.1.1 Message-ID: <Pine.BSF.4.21.0010021628520.10578-100000@wysoft.tzo.com> In-Reply-To: <Pine.BSF.4.21.0010021619170.10578-100000@wysoft.tzo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Small note, as I wasn't thinking this far back when I wrote this.. I tracked stable since 3.3-RELEASE on a K6-2 333 (300@4.5x75), and never had such problems. Same good cooling - big fan/heatsink and conducting grease. On Mon, 2 Oct 2000, Jeff Wyman wrote: > Just a little side note, although enough info might have been given out > already... > > I have a K6-2/500 system (actually a 550@6x83) running at 2.2v core. It > runs very fast and has tracked stable for a few months now, building about > every week or so. I decided as of 4.1.1-R to stop this wasting of time, > and built that. 4.1.1-R is built and has been running very stable for a > week now. > > I can also agree with others that a good heatsink/fan combo and either > conducting grease or pads are a MUST with this chip. With a good amount of > grease on mine, it runs fine even without the fan, but I didn't like the > idea of this just to save a little bit more of my ear drums. > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0010021628520.10578-100000>