From owner-freebsd-bugs Sun Nov 12 7:50:19 2000 Delivered-To: freebsd-bugs@freebsd.org Received: from freefall.freebsd.org (freefall.FreeBSD.org [216.136.204.21]) by hub.freebsd.org (Postfix) with ESMTP id E56E537B479 for ; Sun, 12 Nov 2000 07:50:03 -0800 (PST) Received: (from gnats@localhost) by freefall.freebsd.org (8.9.3/8.9.2) id HAA44720; Sun, 12 Nov 2000 07:50:03 -0800 (PST) (envelope-from gnats@FreeBSD.org) Date: Sun, 12 Nov 2000 07:50:03 -0800 (PST) Message-Id: <200011121550.HAA44720@freefall.freebsd.org> To: freebsd-bugs@FreeBSD.org Cc: From: NAKAJI Hiroyuki Subject: Re: kern/22634: 4.2-Beta (11/06) Kernel does not detect Slave HDs Reply-To: NAKAJI Hiroyuki Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org The following reply was made to PR kern/22634; it has been noted by GNATS. From: NAKAJI Hiroyuki To: Soren Schmidt Cc: FreeBSD-gnats-submit@freebsd.org (Freebsd-Gnats-Submit) Subject: Re: kern/22634: 4.2-Beta (11/06) Kernel does not detect Slave HDs Date: 13 Nov 2000 00:46:25 +0900 --Multipart_Mon_Nov_13_00:46:25_2000-1 Content-Type: text/plain; charset=US-ASCII >>>>> In <200011121437.PAA47290@freebsd.dk> >>>>> Soren Schmidt wrote: Soren> OK, the old one is not of much use since its not verbose and doesn't Soren> contain the info I'm looking for, but, the new one is with the first Soren> patch I announced, please try the new one diff-4.2-1 as that should Soren> fix the problem... I see. I got dmesg again with '-v' option. But new diff-4.2-1 did not fix the problem, acd0 disappeared again... Here are dmesges. First is kernel of 2000.08.22 and the other is kernel of 2000.11.11 patched with diff-4.2-1. Thanks. -- NAKAJI Hiroyuki --Multipart_Mon_Nov_13_00:46:25_2000-1 Content-Type: application/octet-stream Content-Disposition: attachment; filename="dmesg-v.20000822" Content-Transfer-Encoding: 7bit Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-STABLE #0: Fri Nov 10 20:11:25 JST 2000 root@pcat.heimat.gr.jp:/usr/obj/usr/src/sys/NAKAJI4 Calibrating clock(s) ... TSC clock: 434327869 Hz, i8254 clock: 1193209 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (434.32-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0041f000 - 0x0ffe7fff, 264015872 bytes (64457 pages) config> port ed0 0x300 config> irq ed0 10 config> enable apm avail memory = 257216512 (251188K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fad40 bios32: Entry = 0xfb240 (c00fb240) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb270 pnpbios: Found PnP BIOS data at 0xc00fbf80 pnpbios: Entry = f0000:bfa8 Rev = 1.0 Other BIOS signatures found: ACPI: 000f72b0 Preloaded elf kernel "kernel" at 0xc0406000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc04060a8. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcib-: pcib0 exists, using next available unit number apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcib0: on motherboard found-> vendor=0x1106, dev=0x0691, revid=0x44 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d8000000, size 26 found-> vendor=0x1106, dev=0x8598, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0596, revid=0x23 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x10 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d000, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x11 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x1106, dev=0x3050, revid=0x30 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x10b7, dev=0x9055, revid=0x30 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 7 map[14]: type 1, range 32, base dd000000, size 7 found-> vendor=0x13f6, dev=0x0111, revid=0x10 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000dc00, size 8 found-> vendor=0x13f6, dev=0x0211, revid=0x10 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base 0000e000, size 6 pci0: on pcib0 pcib2: at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8a13, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 26 pci1: on pcib2 pci1: (vendor=0x5333, dev=0x8a13) at 0.0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xd000-0xd00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=50 status1=50 ata0: devices = 0x3 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008 ata1: mask=03 status0=50 status1=51 ata1: mask=03 status0=10 status1=00 ata1: devices = 0x4 ata1: at 0x170 irq 15 on atapci0 uhci0: port 0xd400-0xd41f irq 11 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port 1 power on failed, IOERROR uhub0: port 2 power on failed, IOERROR xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xdd000000-0xdd00007f irq 11 at device 9.0 on pci0 using shared irq11. xl0: Ethernet address: 00:01:02:c2:15:ad xl0: media options word: a xl0: found MII/AUTO miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached pci0: (vendor=0x13f6, dev=0x0111) at 13.0 irq 11 pci0: (vendor=0x13f6, dev=0x0211) at 13.1 irq 11 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pci-: pci1 exists, using next available unit number pcib1: on motherboard pci2: on pcib1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fe0: EEPROM(SSI): 0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic1: not probed (disabled) sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: PRINTER BJ,PR,BJL,BJRaster,BSCC plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c840, tty 63109a, net 67189a bpf: sl0 attached bpf: faith0 attached ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ata0-master: success setting up UDMA2 mode on VIA chip ad0: ATA-4 disk at ata0 as master ad0: 12419MB (25434228 sectors), 25232 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=0 Creating DISK ad0 Creating DISK wd0 ata0-slave: success setting up UDMA4 mode on VIA chip ad1: ATA-4 disk at ata0 as slave ad1: 19547MB (40032696 sectors), 39714 cyls, 16 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 1 depth queue, UDMA66 ad1: piomode=4 dmamode=2 udmamode=4 cblid=1 Creating DISK ad1 Creating DISK wd1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting up PIO4 mode on generic chip acd0: <40X CD-ROM/VER 2.2A> CDROM drive at ata1 as master acd0: read 171KB/s (6875KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray acd0: Medium: no/blank disc inside, unlocked Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 25433855, size 25433793 : OK start_init: trying /sbin/init ad1s1: type 0xa5, start 63, end = 40017914, size 40017852 : OK --Multipart_Mon_Nov_13_00:46:25_2000-1 Content-Type: application/octet-stream Content-Disposition: attachment; filename="dmesg-v.20001112" Content-Transfer-Encoding: 7bit Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-BETA #0: Sun Nov 12 22:19:11 JST 2000 root@pcat.heimat.gr.jp:/usr/obj/usr/src/sys/NAKAJI4 Calibrating clock(s) ... TSC clock: 434328050 Hz, i8254 clock: 1193209 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (434.32-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff real memory = 268369920 (262080K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00431000 - 0x0ffe7fff, 263942144 bytes (64439 pages) config> port ed0 0x300 config> irq ed0 10 config> enable apm avail memory = 257142784 (251116K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fad40 bios32: Entry = 0xfb240 (c00fb240) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb270 pnpbios: Found PnP BIOS data at 0xc00fbf80 pnpbios: Entry = f0000:bfa8 Rev = 1.0 Other BIOS signatures found: ACPI: 000f72b0 Preloaded elf kernel "kernel" at 0xc0418000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc04180a8. Pentium Pro MTRR support enabled md0: Malloc disk Creating DISK md0 Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcib-: pcib0 exists, using next available unit number apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 npx0: on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcib0: on motherboard found-> vendor=0x1106, dev=0x0691, revid=0x44 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d8000000, size 26 found-> vendor=0x1106, dev=0x8598, revid=0x00 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x1106, dev=0x0596, revid=0x23 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1106, dev=0x0571, revid=0x10 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000d000, size 4 found-> vendor=0x1106, dev=0x3038, revid=0x11 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 0000d400, size 5 found-> vendor=0x1106, dev=0x3050, revid=0x30 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x10b7, dev=0x9055, revid=0x30 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000d800, size 7 map[14]: type 1, range 32, base dd000000, size 7 found-> vendor=0x13f6, dev=0x0111, revid=0x10 class=04-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000dc00, size 8 found-> vendor=0x13f6, dev=0x0211, revid=0x10 class=07-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=b, irq=11 map[10]: type 1, range 32, base 0000e000, size 6 pci0: on pcib0 pcib2: at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8a13, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 26 pci1: on pcib2 pci1: (vendor=0x5333, dev=0x8a13) at 0.0 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xd000-0xd00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd008 ata1: mask=00 status0=50 status1=51 ata1: probe allocation failed uhci0: port 0xd400-0xd41f irq 11 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xdd000000-0xdd00007f irq 11 at device 9.0 on pci0 using shared irq11. xl0: Ethernet address: 00:01:02:c2:15:ad xl0: media options word: a xl0: found MII/AUTO miibus0: on xl0 xlphy0: <3Com internal media interface> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached pci0: (vendor=0x13f6, dev=0x0111) at 13.0 irq 11 pci0: (vendor=0x13f6, dev=0x0211) at 13.1 irq 11 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pci-: pci1 exists, using next available unit number pcib1: on motherboard pci2: on pcib1 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3: iobase=0x0170 altiobase=0x0376 bmaddr=0x0000 ata3: mask=00 status0=50 status1=51 ata3: probe allocation failed ata3 failed to probe at port 0x170-0x177,0x376 irq 15 on isa0 adv0 failed to probe at port 0x330 on isa0 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x8041 0x8051 0x8041 0x8041 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: irq maps: 0x8041 0x8049 0x8041 0x8041 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: PRINTER BJ,PR,BJL,BJRaster,BSCC plip0: on ppbus0 bpf: lp0 attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ed0 failed to probe at port 0x300-0x31f iomem 0xd8000 irq 10 drq 0 on isa0 fe0: EEPROM(SSI): 0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI): f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):110: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):130: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):140: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):150: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):170: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):190: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0: EEPROM(SSI):1f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe0 failed to probe at port 0x300-0x31f on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 cs0 failed to probe at port 0x300 on isa0 sn0 failed to probe at port 0x300 irq 10 on isa0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached new masks: bio 684840, tty 63109a, net 67189a bpf: sl0 attached ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable ata0-master: success setting UDMA2 on VIA chip Creating DISK ad0 Creating DISK wd0 ad0: ATA-4 disk at ata0-master ad0: 12419MB (25434228 sectors), 25232 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=0 ad0: 12419MB [25232/16/63] at ata0-master UDMA33 Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 25433855, size 25433793 : OK start_init: trying /sbin/init --Multipart_Mon_Nov_13_00:46:25_2000-1-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message