Skip site navigation (1)Skip section navigation (2) 
Date:      Wed, 3 Aug 2011 23:57:38 +0000 (UTC)
From:      Adrian Chadd <adrian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r224644 - head/sys/dev/ath/ath_hal/ar9002
Message-ID:  <201108032357.p73NvcYp035643@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help 
Author: adrian
Date: Wed Aug  3 23:57:38 2011
New Revision: 224644
URL: http://svn.freebsd.org/changeset/base/224644

Log:
  Undo this for now. It's "right", but it means everything will rely on
  the ar9130 code.
  
  Since at least one kernel config specifies individual ath HAL chips
  rather than just "device ath_hal" (arm/AVILA), I'm doing this so people
  aren't caught out when they update to -HEAD or 9.0 and discover their
  ath setup doesn't compile.
  
  I'll revisit this with a proper fix sometime before 9.0-RELEASE.
  
  Approved by:	re (kib, blanket)
  Pointed out by:	ray@
  Pointy hat to:	adrian@

Modified:
  head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c
  head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c
  head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c

Modified: head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c	Wed Aug  3 23:36:04 2011	(r224643)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9280_attach.c	Wed Aug  3 23:57:38 2011	(r224644)
@@ -28,8 +28,6 @@
 #include "ar5416/ar5416reg.h"
 #include "ar5416/ar5416phy.h"
 
-#include "ar9001/ar9130_eeprom.h"
-
 #include "ar9002/ar9280v1.ini"
 #include "ar9002/ar9280v2.ini"
 #include "ar9002/ar9280_olc.h"
@@ -193,12 +191,6 @@ ar9280Attach(uint16_t devid, HAL_SOFTC s
 	AH5416(ah)->ah_rx_chainmask	= AR9280_DEFAULT_RXCHAINMASK;
 	AH5416(ah)->ah_tx_chainmask	= AR9280_DEFAULT_TXCHAINMASK;
 
-	if (eepromdata) {
-		AH_PRIVATE((ah))->ah_eepromRead = ar9130EepromRead;
-		AH_PRIVATE((ah))->ah_eepromWrite = NULL;
-		ah->ah_eepromdata = eepromdata;
-	}
-
 	if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {
 		/* reset chip */
 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n",

Modified: head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c	Wed Aug  3 23:36:04 2011	(r224643)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9285_attach.c	Wed Aug  3 23:57:38 2011	(r224644)
@@ -29,8 +29,6 @@
 #include "ar5416/ar5416reg.h"
 #include "ar5416/ar5416phy.h"
 
-#include "ar9001/ar9130_eeprom.h"
-
 #include "ar9002/ar9285.ini"
 #include "ar9002/ar9285v2.ini"
 #include "ar9002/ar9280v2.ini"		/* XXX ini for tx/rx gain */
@@ -155,13 +153,7 @@ ar9285Attach(uint16_t devid, HAL_SOFTC s
 	AH5416(ah)->ah_writeIni		= ar9285WriteIni;
 	AH5416(ah)->ah_rx_chainmask	= AR9285_DEFAULT_RXCHAINMASK;
 	AH5416(ah)->ah_tx_chainmask	= AR9285_DEFAULT_TXCHAINMASK;
-
-	if (eepromdata) {
-		AH_PRIVATE((ah))->ah_eepromRead = ar9130EepromRead;
-		AH_PRIVATE((ah))->ah_eepromWrite = NULL;
-		ah->ah_eepromdata = eepromdata;
-	}
-
+	
 	ahp->ah_maxTxTrigLev		= MAX_TX_FIFO_THRESHOLD >> 1;
 
 	if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {

Modified: head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c
==============================================================================
--- head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c	Wed Aug  3 23:36:04 2011	(r224643)
+++ head/sys/dev/ath/ath_hal/ar9002/ar9287_attach.c	Wed Aug  3 23:57:38 2011	(r224644)
@@ -30,8 +30,6 @@
 #include "ar5416/ar5416reg.h"
 #include "ar5416/ar5416phy.h"
 
-#include "ar9001/ar9130_eeprom.h"
-
 #include "ar9002/ar9287_cal.h"
 #include "ar9002/ar9287_reset.h"
 #include "ar9002/ar9287_olc.h"
@@ -170,12 +168,6 @@ ar9287Attach(uint16_t devid, HAL_SOFTC s
 	AH5416(ah)->ah_rx_chainmask	= AR9287_DEFAULT_RXCHAINMASK;
 	AH5416(ah)->ah_tx_chainmask	= AR9287_DEFAULT_TXCHAINMASK;
 
-	if (eepromdata) {
-		AH_PRIVATE((ah))->ah_eepromRead = ar9130EepromRead;
-		AH_PRIVATE((ah))->ah_eepromWrite = NULL;
-		ah->ah_eepromdata = eepromdata;
-	}
-
 	if (!ar5416SetResetReg(ah, HAL_RESET_POWER_ON)) {
 		/* reset chip */
 		HALDEBUG(ah, HAL_DEBUG_ANY, "%s: couldn't reset chip\n",

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201108032357.p73NvcYp035643>