Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Jul 2009 22:50:51 +0300
From:      Dmitriy Demidov <dima_bsd@inbox.lv>
To:        Chuck Swiger <cswiger@mac.com>
Cc:        freebsd-ipfw@freebsd.org
Subject:   Re: ipfw nat and localy initiated UDP traffic (bad udp cksum)
Message-ID:  <200907162250.51585.dima_bsd@inbox.lv>
In-Reply-To: <2CE3CD12-D430-4378-92C1-591227888428@mac.com>
References:  <200907142355.34973.dima_bsd@inbox.lv> <200907162219.04986.dima_bsd@inbox.lv> <2CE3CD12-D430-4378-92C1-591227888428@mac.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Thursday 16 July 2009, Chuck Swiger wrote:
> On Jul 16, 2009, at 12:19 PM, Dmitriy Demidov wrote:
> > Update about this issue.
> > There is somthing wrong with UDP pass through - ipfw nat makes it
> > "bad cksum".
>
> tcpdump receives local network traffic before the checksums are
> computed (especially if hardware checksums are enabled); this is a non-
> issue, although you could confirm by sniffing the traffic from an
> external machine like a laptop.
>
> Regards,

Wow! :) Thank you Chuck for this hint! I catch the problem!
My em0 have offload options on, so I turned them off and now all is working as 
expected.


before:
===
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:20:ed:91:97:93
        inet 87.110.108.74 netmask 0xfffffe00 broadcast 255.255.255.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
===


after:
===
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=98<VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 00:20:ed:91:97:93
        inet 87.110.108.74 netmask 0xfffffe00 broadcast 255.255.255.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
===


dmesg | grep em0
===
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xa000-0xa03f mem 
0xdb100000-0xdb11ffff irq 21 at device 9.0 on pci2
em0: [FILTER]
em0: Ethernet address: 00:20:ed:91:97:93
===


pciconf -lv
===
em0@pci0:2:9:0: class=0x020000 card=0x30138086 chip=0x100e8086 rev=0x02 
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Gigabit Ethernet Controller (82540EM)'
    class      = network
    subclass   = ethernet
===



Do this looks like a bug (em drivers, nat, etc...) or not?
Should I make new PR for this problem?




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?200907162250.51585.dima_bsd>