Date: Sat, 30 Aug 2003 19:11:15 -0700 (PDT) From: Kevin Bockman <neoninternet@yahoo.com> To: freebsd-questions@freebsd.org Subject: Filesystem problem Message-ID: <20030831021115.65599.qmail@web41813.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi. I have been experencing some filesystem problems
for the last month or so. I was running 4.8-STABLE and
updated to 5.1-RELEASE-p2. While I was running 4.8
and I tried to run a command that required hard disk
activity, the process would 'hang' and I would no
longer be able to ssh or telnet in. I would get stuck
after typing in my login.
Running 5.1 is a different story. I did a clean
install of 5.1-RELEASE and cvsup'd to -p2. Every time
I do this, it's great for a day or so then it acts up.
Before after it started, even if I rebooted it would
immediately start up. On 5.1, it is only hanging for
that process and everything else is fine. I can still
login, webserver responds, etc.
Here is a little info:
FreeBSD devel.neoninternet.net 5.1-RELEASE-p2 FreeBSD
5.1-RELEASE-p2 #0: Sat Aug 23 20:12:41 PDT 2003
kevin@devel.ph.cox.net:/usr/src/sys/i386/compile/SLURPEE
i386
CPU: AMD Athlon(tm) XP 2600+ (2086.51-MHz 686-class
CPU)
real memory = 1073676288 (1023 MB)
ad0: 117246MB <Maxtor 6Y120P0> [238216/16/63] at
ata0-master UDMA133
root 1173 0.0 0.1 1436 916 p3 D+ 6:38PM
0:00.00 man vmstat
root 784 0.0 0.1 752 636 d0 D 4:34PM
0:00.02 make all DIRPRFX=i386/libi386/
root 847 0.0 0.0 312 212 d0 D 4:34PM
0:00.00 (cc)
root 848 0.0 0.3 4104 3488 d0 D 4:34PM
0:00.01 (cc1)
root 849 0.0 0.1 928 668 d0 D 4:34PM
0:00.00 /usr/bin/as -o comconsole.o -
last pid: 1252; load averages: 0.00, 0.00, 0.00
up 0+02:37:22
19:04:48
64 processes: 1 running, 63 sleeping
CPU states: 0.0% user, 0.0% nice, 0.0% system,
0.0% interrupt, 100% idle
Mem: 34M Active, 23M Inact, 38M Wired, 204K Cache, 22M
Buf, 906M Free
Swap: 2048M Total, 2048M Free
devel# vmstat
procs memory page disks
faults cpu
r b w avm fre flt re pi po fr sr ad0 da0
in sy cs us sy id
1 7 0 144612 928056 16 0 0 0 9 0 0 0
331 0 254 0 0 100
Anyone have any suggestions? I can not control-C out
of 'man vmstat'. While doing 'make' in
/usr/src/sys/boot it was hanging on as, when I
restarted it, it got to i386/libi386 and will not do
anything else. I'm running that through serial
console, it let me ^C out of that. I tried going into
single user mode and running umount, now it just sits
there and I can't ^C. I have no ideas, this was all
working yesterday!! :-)
Any ideas on what else to check or other helpful hints
would help bunches.
Thanks,
Kevin
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030831021115.65599.qmail>