Date: Fri, 1 Feb 2002 21:45:40 -0800 From: "Remington" <madriax@garlic.com> To: <freebsd-questions@FreeBSD.ORG>, <freebsd-stable@FreeBSD.ORG> Subject: SB Live and 4.5-STABLE + UATA/100 HDD? Message-ID: <001801c1abac$dcc3f940$a5238bd8@blah>
next in thread | raw e-mail | index | archive | help
Ok I have a SoundBlaster Live 5.1 Platinum(pcm1) running FreeBSD
4.5-STABLE. I also have a C-Media audio controller(pcm0) built in to my
motherboard(A7M266). I recompiled a custom kernel with the added "device
pcm" to it. On reboot I did a "cd /dev ; sh MAKEDEV snd1: And when I do
a "cat /dev/dsp" it returns with "/kernel: pcm1: record interrupt
timeout, channel dead.". Why does it do this? What exactly cuases this?
And how would I go about fixing it?
Ive included my dmesg output in hopes someone can see something I cant
that might be causeing this:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.5-STABLE #0: Thu Jan 31 21:55:29 PST 2002
root@bathory.aria:/usr/src/sys/compile/Build2
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1400.06-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 536788992 (524208K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 517705728 (505572K bytes)
Preloaded elf kernel "kernel" at 0xc047b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc047b09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f1370
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-761 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia GeForce2 GTS graphics accelerator> at 5.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd800-0xd80f at device 4.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device
4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: WINBOND W9967CF, rev 1.10/1.10, addr 2
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device
4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 4.4 on pci0
pcm0: <CMedia CMI8738> port 0xa400-0xa4ff irq 10 at device 5.0 on pci0
pcm1: <Creative EMU10K1> port 0xa000-0xa01f irq 7 at device 10.0 on pci0
atapci1: <Promise TX2 ATA100 controller> port
0x8000-0x800f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407
mem 0xe5800000-0xe5803fff irq 10 at device 11.0 on pci0
ata2: at 0x9400 on atapci1
ata3: at 0x8800 on atapci1
orm0: <Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcdfff on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 58644MB <Maxtor 5T060H6> [119150/16/63] at ata0-master UDMA33
ad1: 6149MB <QUANTUM FIREBALL SE6.4A> [13328/15/63] at ata0-slave UDMA33
ad4: 12416MB <QUANTUM FIREBALL CR13.0A> [25228/16/63] at ata2-master
UDMA66
Mounting root from ufs:/dev/ad1s1a
And one more thing my Maxtor 5T060H6 is a UATA/100 drive, and it is on a
UATA/100 cable and windows XP sees it properly, why doesn't FreeBSD?
Windows, not worth the CD its burned on.
-Remington
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001801c1abac$dcc3f940$a5238bd8>