Date: Thu, 13 Sep 2001 11:32:01 -0400 From: "Russell D. Murphy Jr." <rdmurphy@vt.edu> To: Warner Losh <imp@harmony.village.org> Cc: FreeBSD-mobile@FreeBSD.ORG Subject: Re: pccardd and TI PCI-1250 PCI-CardBus Bridge Message-ID: <15264.53617.698867.84047@localhost.econ.vt.edu> In-Reply-To: <200109130743.f8D7hwt96167@harmony.village.org> References: <15262.7579.175475.703603@localhost.econ.vt.edu> <15261.4103.952522.597428@localhost.econ.vt.edu> <200109110232.f8B2W6t29273@harmony.village.org> <200109130743.f8D7hwt96167@harmony.village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I've set: According to Warner Losh (September 13, 2001): | | hw.pcic.intr_path=1 | hw.pcic.irq=0 # values other than 0 don't work | | would be better. | | Plug and play OS should be NO if you can set it. Otherwise chances | are good that it just doesn't matter. PNP OS is NO. The response is strange; I inserted and ejected the card 3 times: The machine boots up as: Sep 13 10:10:31 kenmare /kernel: pcic0: <TI PCI-1250 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0 Sep 13 10:10:31 kenmare /kernel: pcic0: PCI Memory allocated: 0x44000000 Sep 13 10:10:31 kenmare /kernel: pcic0: Polling mode Sep 13 10:10:31 kenmare /kernel: pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] Sep 13 10:10:31 kenmare /kernel: pccard0: <PC Card bus (classic)> on pcic0 Sep 13 10:10:31 kenmare /kernel: pcic1: <TI PCI-1250 PCI-CardBus Bridge> irq 9 at device 10.1 on pci0 Sep 13 10:10:31 kenmare /kernel: pcic1: PCI Memory allocated: 0x44001000 Sep 13 10:10:31 kenmare /kernel: pcic1: Polling mode Sep 13 10:10:31 kenmare /kernel: pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][FUNC pci int + CSC serial isa irq] Sep 13 10:10:31 kenmare /kernel: pccard1: <PC Card bus (classic)> on pcic1 1 - I insert the card and it seems to be recognized, but the machine doesn't respond to the keyboard. I eject the card. Sep 13 10:11:00 kenmare /kernel: pccard: card inserted, slot 0 Sep 13 10:11:00 kenmare /kernel: pcic0: reset 1 int is 0 stat is 7f Sep 13 10:11:01 kenmare /kernel: pcic0: reset 2 int is 60 stat is 5f Sep 13 10:11:01 kenmare /kernel: pcic0: reset 3 int is 60 stat is 7f Sep 13 10:11:06 kenmare pccardd[132]: Card "3Com Corporation"("3C589D") [TP/BNC LAN Card Ver. 2a] [000002] matched "3Com Corporation" ("/3C589/") [(null)] [(null)] Sep 13 10:11:11 kenmare /kernel: pccard0: Assigning ep0: io 0x250-0x25f irq 3 mem 0x0-0xffffffff Sep 13 10:11:12 kenmare /kernel: pcic: I/O win 0 flags 17 250-25f Sep 13 10:11:12 kenmare /kernel: pcic: I/O win 0 flags 7 250-25f Sep 13 10:11:12 kenmare /kernel: ep0: <3Com Etherlink III 3C589> at port 0x250-0x25f irq 3 slot 0 on pccard0 Sep 13 10:11:12 kenmare /kernel: pcic: I/O win 0 flags 17 250-25f Sep 13 10:11:12 kenmare /kernel: ep0: Ethernet address 00:60:08:b1:3a:5e Sep 13 10:11:12 kenmare /kernel: bpf: ep0 attached Sep 13 10:11:12 kenmare /kernel: pcic: I/O win 0 flags 7 250-25f Sep 13 10:11:12 kenmare /kernel: ep0: detached Sep 13 10:11:12 kenmare /kernel: pccard: card removed, slot 0 Sep 13 10:11:11 kenmare pccardd[132]: ep0: 3Com Corporation (/3C589/) inserted. Sep 13 10:11:12 kenmare pccardd[132]: ep0: 3Com Corporation (/3C589/) removed. 2 - now the machine responds again; so I re-insert the card. Now, the card isn't recognized, but the machine responds to the keyboard. I eject the card. Sep 13 10:55:02 kenmare /kernel: pccard: card inserted, slot 0 Sep 13 10:55:02 kenmare /kernel: pcic0: reset 1 int is 0 stat is c Sep 13 10:55:02 kenmare /kernel: pcic0: reset 2 int is 60 stat is c Sep 13 10:55:02 kenmare /kernel: pcic0: reset 3 int is 60 stat is c Sep 13 10:55:07 kenmare pccardd[132]: No card in database for "(null)"("(null)") Sep 13 10:56:04 kenmare /kernel: pccard: card removed, slot 0 3 - Re-inserting the card now hangs the machine, after it's recognized. It has to be turned off. Sep 13 10:56:29 kenmare /kernel: pccard: card inserted, slot 0 Sep 13 10:56:29 kenmare /kernel: pcic0: reset 1 int is 0 stat is 7f Sep 13 10:56:29 kenmare /kernel: pcic0: reset 2 int is 60 stat is 5f Sep 13 10:56:29 kenmare /kernel: pcic0: reset 3 int is 60 stat is 7f Sep 13 10:56:34 kenmare pccardd[132]: Card "3Com Corporation"("3C589D") [TP/BNC LAN Card Ver. 2a] [000002] matched "3Com Corporation" ("/3C589/") [(null)] [(null)] Russ M. -- Russell D. Murphy Department of Economics Virginia Polytechnic Institute and State University Blacksburg, Virginia 24061 (540) 231-4537 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15264.53617.698867.84047>