Date: Thu, 22 Mar 2007 17:37:06 +0200 From: Anton Stamenov <mail4lists@gmail.com> To: freebsd-bluetooth@freebsd.org Subject: Re: Cannot pair Nokia E61 Message-ID: <20070322153545.GA15238@gmail.com> In-Reply-To: <200703221507.34630.ml-vic@de-martino.it> References: <200703221507.34630.ml-vic@de-martino.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Try to uncomment the this in /etc/rc.bluetooth
# Enable this if you have trouble with accepting incomming connections.
# By default we will try to perform role switch and become Master on
# incomming connection (if local device supports it). Some devices
# do not support role switch and thus incomming connection from such
# devices will fail.
# ${hccontrol} -n ${dev}hci write_node_role_switch 0 || exit 1
On Thu, 22 Mar 2007, ml-vic wrote:
> I'm trying to connect my Nokia E61 (called 'e61' in /etc/bluetooth/host
> and 'NokiaVic' in /etc/bluetooth/hcsecd.conf, see below) to a laptop with
> the latest 6.2 thru a usb bluetooth dongle.
> The bottom line of it is that - form the E61 standpoint - the phone sees the
> computer as 'NbBSD.dom (ubt0)', but it fails to pair upon introduction of the
> pin 0000.
> In rc.conf I enabled hcsecd.
>
> Here you are a detailed script ofa long useless session (I'm connected as
> root) that for an expert can be useful to understand what's wrong with it.
>
> Please help.
> Ciao from Rome - Vittorio
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> Script started on Thu Mar 22 14:00:43 2007
>
> NbBSD# /etc/rc.bluetooth start ubt0
> BD_ADDR: 00:11:f6:07:cb:b8
> Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80
> <3-Slot> <5-Slot> <Encryption> <Slot offset>
> <Timing accuracy> <Switch> <Hold mode> <Sniff mode>
> <Park mode> <RSSI> <Channel quality> <SCO link>
> <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
> <Paging scheme> <Power control> <Transparent SCO data>
> <Unknown2.7>
> Max. ACL packet size: 384 bytes
> Number of ACL packets: 8
> Max. SCO packet size: 64 bytes
> Number of SCO packets: 8
>
> NbBSD# cat /etc/bluetooth/hcsecd.conf
> device {
> bdaddr 00:11:f6:07:c8:b8;
> name "CompaqPC";
> key nokey;
> pin "0000";
> }
>
> device {
> bdaddr 00:12:d2:65:c2:03;
> name "NokiaVic";
> key nokey;
> pin "0000";
> }
> NbBSD# cat /etc/bluetooth/hcsecd.conf /etc/bluetooth/hcsecd.conf
>
> # BD_ADDR Name [ alias0 alias1 ... ]
> # **localhost**
> 00:11:f6:07:c8:b8 compaq
> #The Nokia E61 cell
> 00:12:d2:65:c2:03 e61
> NbBSD# usbdevs -v -d
>
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000), rev 1.00
> uhub0
> port 1 addr 2: full speed, self powered, config 1, product 0x4482(0x4482),
> vendor 0x04b3(0x04b3), rev 0.00
> uhub3
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
> port 2 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000), rev 1.00
> uhub1
> port 1 powered
> port 2 addr 2: full speed, self powered, config 1, product 0x0001(0x0001),
> vendor 0x0a12(0x0a12), rev 19.58
> ubt0
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x0000), rev 1.00
> uhub2
> port 1 powered
> port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> NEC(0x0000), rev 1.00
> uhub4
> port 1 powered
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> NEC(0x0000), rev 1.00
> uhub5
> port 1 addr 2: full speed, power 100 mA, config 1, Fusion UMTS
> Quad-GPRS(0x6300), Option N.V.(0x0af0), rev 0.00
> ucom0
>
> NbBSD# hccontrol -n ubt0hci inquiry
>
> Inquiry result, num_responses=1
> Inquiry result #0
> BD_ADDR: e61
> Page Scan Rep. Mode: 0x1
> Page Scan Period Mode: 0x2
> Page Scan Mode: 00
> Class: 50:02:0c
> Clock offset: 0xf48
> Inquiry complete. Status: No error [00]
>
> NbBSD# hccontrol -n ubt0hci remote_name_request
> BD_ADDR: e61
> Name: NokiaVic
>
> NbBSD# hccontrol -n ubt0hci create_connection e61
> BD_ADDR: e61
> Connection handle: 42
> Encryption mode: Disabled [0]
>
> NbBSD# hccontrol -n ubt0hci read_connection_list
> Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State
>
> NbBSD# hccontrol -n ubt0hci create_connection NokiaVic
> 00:12:d2:65:c2:03
> BD_ADDR: e61
> Connection handle: 42
> Encryption mode: Disabled [0]
>
> NbBSD# hccontrol -n ubt0hci read_connection_list
> Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State
>
> NbBSD# hccontrol -n ubt0hci get_link_quality 42
> Status: No connection [0x2]
>
> NbBSD# l2ping -a e61
> 0 bytes from e61 seq_no=0 time=1430.404 ms result=0
> 0 bytes from e61 seq_no=1 time=60.359 ms result=0
> 0 bytes from e61 seq_no=2 time=58.552 ms result=0
> 0 bytes from e61 seq_no=3 time=61.747 ms result=0
> ^C
>
> NbBSD# l2control -a e61 read_connection_list
> l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down
>
> NbBSD# hccontrol -n ubt0hci write_authentication_enable 1
>
> NbBSD# hccontrol -n ubt0hci write_authentication_enable l
> Authentication Enable: Enabled [1]
>
> NbBSD# sdpcontrol -a e61 browse
>
> Record Handle: 0x00010000
> Service Class ID List:
> A/V Remote Control (0x110e)
> Protocol Descriptor List:
> L2CAP (0x0100)
> Protocol specific parameter #1: u/int/uuid16 23
> AVCTP (0x0017)
> Protocol specific parameter #1: u/int/uuid16 256
> Protocol specific parameter #2: u/int/uuid16 3840
>
> Record Handle: 0x00010001
> Service Class ID List:
> OBEX Object Push (0x1105)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 9
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> OBEX Object Push (0x1105) ver. 1.0
>
> Record Handle: 0x00010002
> Service Class ID List:
> Dial-Up Networking (0x1103)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 2
> Bluetooth Profile Descriptor List:
> Dial-Up Networking (0x1103) ver. 1.0
>
> Record Handle: 0x00010003
> Service Class ID List:
> Invalid Service Class ID List. Not a UUID, type=0x35
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 1
>
> Record Handle: 0x00010006
> Service Class ID List:
> Imaging Responder (0x111b)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 15
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> Imaging (0x111a) ver. 1.0
>
> Record Handle: 0x00010007
> Service Class ID List:
> 0x00000002-0000-1000-8000-0002ee000002
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 10
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> 0x00000002-0000-1000-8000-0002ee000002 ver. 1.0
>
> Record Handle: 0x00010008
> Service Class ID List:
> OBEX File Transfer (0x1106)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 11
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> OBEX File Transfer (0x1106) ver. 1.0
>
> Record Handle: 0x00010009
> Service Class ID List:
> 0x00005005-0000-1000-8000-0002ee000001
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 12
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> 0x00005005-0000-1000-8000-0002ee000001 ver. 1.0
>
> Record Handle: 0x0001000a
> Service Class ID List:
> 0x00000004-0000-1000-8000-0002ee000002
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 13
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> 0x00000004-0000-1000-8000-0002ee000002 ver. 1.0
>
> Record Handle: 0x0001000b
> Service Class ID List:
> 0x00005601-0000-1000-8000-0002ee000001
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 14
> OBEX (0x0008)
> Bluetooth Profile Descriptor List:
> 0x00005601-0000-1000-8000-0002ee000001 ver. 1.0
>
> Record Handle: 0x0001000c
> Service Class ID List:
> SIM Access (0x112d)
> Generic Telephony (0x1204)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 8
> Bluetooth Profile Descriptor List:
> SIM Access (0x112d) ver. 1.1
>
> Record Handle: 0x0001000d
> Service Class ID List:
> Handsfree Audio Gateway (0x111f)
> Generic Audio (0x1203)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 28
> Bluetooth Profile Descriptor List:
> Handsfree Audio Gateway (0x111f) ver. 1.1
>
> Record Handle: 0x0001000e
> Service Class ID List:
> Headset Audio Gateway (0x1112)
> Generic Audio (0x1203)
> Protocol Descriptor List:
> L2CAP (0x0100)
> RFCOMM (0x0003)
> Protocol specific parameter #1: u/int8/bool 29
> Bluetooth Profile Descriptor List:
> Headset (0x1108) ver. 1.0
> Script done on Thu Mar 22 14:22:04 2007
>
> _______________________________________________
> freebsd-bluetooth@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth
> To unsubscribe, send any mail to "freebsd-bluetooth-unsubscribe@freebsd.org"
--
___________
anton
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070322153545.GA15238>