Date: Wed, 1 Apr 2015 16:27:05 +0200 (CEST) From: Damian Weber <dweber@htwsaar.de> To: Hans Petter Selasky <hps@selasky.org>, Kurt Jaeger <lists@opsec.eu> Cc: freebsd-current@freebsd.org Subject: Re: umass, Verbatim STORE N GO drive, CAM status 0x50 Message-ID: <alpine.BSF.2.11.1504011615500.9508@magritte.htwsaar.de> In-Reply-To: <5516BC51.6080108@selasky.org> References: <alpine.BSF.2.11.1503281506040.42072@magritte.htwsaar.de> <5516BC51.6080108@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Try adding some quirks: > > usbconfig dump_quirk_names | grep MSC > > --HPS Dear Hans Petter and Kurt, thank you for your great advice, I successfully attached my Verbatim USB drive the magic lines are in ./dev/usb/usbdevs : +vendor VERBATIM 0x18a5 Verbatim +product VERBATIM STORENGO 0x0243 Verbatim Store N Go in ./dev/usb/quirk/usb_quirk.c /* copied from SANDISK, SDCZ2_128 */ + USB_QUIRK(VERBATIM, STORENGO, 0x0000, 0xffff, UQ_MSC_FORCE_WIRE_BBB, + UQ_MSC_FORCE_PROTO_SCSI, UQ_MSC_IGNORE_RESIDUE, + UQ_MSC_NO_SYNC_CACHE), result: a) can mount it (mount_msdosfs) b) can read/write files (sha1-checksums verified) two questions remain 1) can the dmesg error messages be dealt with? ILLEGAL REQUEST asc:20,0 ugen2.2: <Verbatim> at usbus2 umass0: <Verbatim STORE N GO, class 0/0, rev 2.10/1.00, addr 2> on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x4080 umass0:4:0: Attached to scbus4 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <Verbatim STORE N GO > Removable Direct Access SPC-4 SCSI device da0: 40.000MB/s transfers da0: 14909MB (30535401 512 byte sectors: 255H 63S/T 1900C) da0: quirks=0x2<NO_6_BYTE> 2) is it possible to modify usb_quirk.c without going through the whole make-kernel dance? Best wishes Damian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.11.1504011615500.9508>