Date: Fri, 26 Jan 2001 21:36:24 -0600 (CST) From: John Kenagy <jktheowl@bga.com> To: freebsd-questions@freebsd.org Subject: linksys ne2000 card not detected on 4.2R Message-ID: <Pine.BSF.4.21.0101261737560.243-100000@barnowl.roost.net>
next in thread | raw e-mail | index | archive | help
Well, new release new problem.
On loading 4.2R the ed0 interface does not appear at all. The
configuration utility (during installation) was used to create the
kernel.conf file. This is the first time in several upgrades (skipped 4.0
and 4.1) where this has happened and results in no network.
I can't do too much research since this box still does not have all "my
stuff" on it yet. The OS itself and X are running fine, so this is a
puzzle.
The kernel.conf file and dmesg output are below. If anyone has an idea of
what thing I've blindly overlooked...
Thanks, John
------------dmesg output---------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Mon Nov 20 13:02:55 GMT 2000
jkh@bento.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Am5x86 Write-Back (486-class CPU)
Origin = "AuthenticAMD" Id = 0x4f4 Stepping = 4
Features=0x1<FPU>
real memory = 33554432 (32768K bytes)
avail memory = 28565504 (27896K bytes)
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6000-0x60ff mem 0xf0800000-0xf0800fff irq 12 at device 3.0 on pci0
aic7880: Single Channel A, SCSI Id=7, 16/255 SCBs
pci0: <S3 Trio graphics accelerator> at 4.0
pcib1: <UMC UM8881 HB4 486 PCI Chipset> at device 16.0 on pci0
isab0: <UMC UM8886 ISA Bridge with EIDE> at device 18.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> at device 18.1 on pci0
atapci0: Busmastering DMA not configured
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 2441MB <WDC AC32500H> [4960/16/63] at ata0-master BIOSPIO
ad1: 814MB <WDC AC2850F> [1654/16/63] at ata0-slave BIOSPIO
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:ad0s1a
da0 at ahc0 bus 0 target 5 lun 0
da0: <IOMEGA ZIP 100 K.05> Removable Direct Access SCSI-2 device
da0: 3.300MB/s transfers
da0: 96MB (196608 512 byte sectors: 64H 32S/T 96C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TEAC CD-ROM CD-56S 1.0D> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
---------------kernel.conf--------
di sn0
di lnc0
di ie0
di fe0
di cs0
di bt0
di ata1
di aic0
di aha0
di adv0
en ed0
po ed0 0x300
ir ed0 10
iom ed0 0xd8000
f ed0 0
q
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0101261737560.243-100000>